Premium Gear Spray Lubrication Systems
Total Page:16
File Type:pdf, Size:1020Kb
An IMCI Company Lubrication Solutions for Ball Mills PREMIUM GEAR SPRAY LUBRICATION SYSTEMS • Custom designed for optimal lubrication of Girth • Optional range of spray nozzles available; heated Gears and Pinions on rotating equipment. nozzles for cold temperatures, and monitoring of the • For harduous applications that require constant, lubricant and air flow. metered and direct lubrication with grease or high • Stand-alone design can be easily retrofitted. viscosity oils, providing increased Mill output . • Programmable controller for simpler adjustability. • Spray lubrication systems extend gear and pinion life • Optional heated enclosures for protection against cold by up to 50%! temperatures and hazardous operating conditions. • The industry recognised solution for applying the • Reduced vibration and noise with synthetic/speciality required quantity of synthetic/speciality gear gear lubricants and controlled intermittent spray. lubricants, with minimal over spray. • Optional custom enclosures are available to provide “plug and play” installation. For more information about this product, please contact: (+91) 2135 623700 or email [email protected] GAT NO 448/13, NIGHOJE, RAJGURUNAGAR (KHED), PUNE - 410 501 MAHARASHTRA INDIA (+91) 2135 623700 TEL (+91) 2135 623758 FAX PROVEN QUALITY, RELIABILITY AND ACCURACY. Overview Bijur Delimon gear spray systems are used to lubricate large gear and pinion sets such as those found in Ball Mills. Each system includes an air operated pumping station, a measuring valve control panel, a spray nozzle lance, electrical controls and other op- tional equipment. Gear face widths of 50mm to 1050mm can be lubricated with nozzles and nozzle spacing M2500G Divider with Integral Solenoid Valve, designed accordingly. Because our gear spray systems operate intermittently they can Cycle Switch, & Strainer be thought of as film maintaining devices. The electrical controls provide broad cycling AIR SOLENOID AIR FILTER & PRESSURE REGULATOR SWITCH MACHINE SD-U Nozzle with Options POWER SOURCE LUBE CONTROLLER Spray Lance [or Custom Made Spray Panel] LUBE STATION WITH LANCE AIR CONTROL PANEL [AIR FILTER, OILER & REGULATOR] 120# DRUM PUMP WITH VENT RELIEF LOW LEVEL SWTICH DIVIDER BLOCK WITH CYCLE SWITCH AND STRAINER Barrel Pump [Electric & Pneumatic Pump Option] with Vent Relief & Low Level Switch WWW.BIJURDELIMON.COM 36982IN • R0 • 01/17.