DOCSLIB.ORG

A a A-A a a A-A 6 a A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A a A-A a a A-A 6 a A Overview mount adapters Adapter M58 / M42-Mount with flange focal length of 18 mm, Art. No.: 11209260 Lens mount adapter M58 to F-Mount, Art. No.: 11117852 6 A-A A 3 A-A 2,1 A Ø 5 5 7 7 1 , , 6 0 0 x ,6 x 59 50 x 48, 58 50 4 8 Ø Ø 5 5 Ø Ø M2 M8 M F-Mount Ø 5,8 A 34,4 3 11,8 40,4 A Lens mount adapter M58 to M42x1-Mount with flange focal length of 45.5 mm, Lens mount adapter M58 to C-Mount, Art. No.: 11115198 Art. No.: 11137781 7 2,1 A-A 6 A 3 A-A 1 3 2,1 Ø A Ø Quickstart Guide 5 5 7 Lens mount options and instructions for cameras 7 1 , , 0 0 x UN x 50 59 with M58 mount x 30 59 2 50 50 4 8 Ø Ø Ø Ø 5 5 M 1"-32 M8 M Download latest camera software: Ø www.baumer.com/vision/software Ø 33,4 3 4,5 A 3 A 39,4 Download latest technical documentation: 11,5 www.baumer.com/cameras/docs Conformity Lens mount adapter M58 to M42x1-Mount with flange focal length of 9.9 mm, Lens mount adapter M58 to C-Mount (Scheimpflug 2.5°),Art. No.: 11165019 Art. No.: 11115200 We declare, under our sole respon- All Baumer lens mount adapters 7 2,1 sibility, that the previously described comply with the recommendation 7 A 3 A-A 1 Baumer lens mount adapters con- of the European Union concerning A A-A 2 Ø 3 1 form with the directives of the CE. RoHS Rules. Ø 5 7 5 , N 7 0 , U 1 0 x 39 59 9 5 x x 5 5 2 50 8 50 3 ° Ø Ø 8 - 5 Ø Ø " 5 5 , M42 1 2 Safety precautions M M Notice Ø Ø 3 3,35 5,3 Ensure the sensor and lens are not contaminated with dust and airborne particles 3 when mounting the support or the lens to the device! A A 12,3 The following points are very important: Lens mount adapter M58 / M42-Mount with flange focal length 16.0 mm, ▪ Install the camera in an environment that is as dust free as possible! Art. No.: 11204598 ▪ Keep the dust cover (bag) on the camera for as long as possible! 6 ▪ Hold the camera with the sensor downwards if the sensor is uncovered. 3 A-A A Ø 2,1 ▪ Avoid contact with any of the camera‘s optical surfaces! 5 7 1 , 0 x x 59 50 50 4 Ø Further Information Ø 5 For further information on our products visit www.baumer.com M2 For technical issues, please contact our technical support: M8 [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Ø 3,8 3 Technical data has been fully checked, but accuracy of printed matter not guaranteed. A 9,8 Subject to change without notice. Printed in Germany 12/20. v4 11208415 Suitable Lenses Mounting instructions LX (other cameras with M58-mount the same) 6. Point camera to far distance (> 10 m). Assemble lens mount adapter + lens (fixed). Adapter Suitable Lenses (examples) 1. ▪ ZVL-Rodagon-F_40mm_f5.6 (11201893) ▪ ZVL-FL-YFL3528 (11201890) > 10 m ▪ ZVL-FL-YFL5028 (11014685) 1. 2. ▪ ZVL-LSF2528-F (11201894) ▪ ZVL-LSF3528-F (11201895) Adapter M58 / F-Mount ▪ ZVL-LSF5028-F (11201896) (Art. No.: 11117852) ▪ ZVL-LSF10528-F (1120187) ▪ ZVL-LSF20035-F (11201898) www.qioptiq.com/machine-vision-lenses 7. Rotate lens until image is sharp. industry.ricoh.com/en/fa_camera_lens/lens www.myutron.com ▪ Kowa LMxxHC lens series, Linos MeVis C > 10 m series 2. Screw lens mount adapter + lens into camera (loose). ▪ Ricoh Imaging FL-BCxxxx-9M series ▪ Schneider Kreuznach Xensation lenses Adapter M58 / C-Mount ▪ Computar Vxxxx-MPY series www.kowa-lenses.com 1. 2. (Art. No.: 11115198) www.qioptiq.com/machine-vision-lenses industry.ricoh.com/en/fa_camera_lens/lens www.schneiderkreuznach.com Notice https://computar.com/ ! Only loose! If flange back is not correctly adjusted image may not be sharp. ▪ Qioptiq Rodagon lenses with M42 mount Adapter M58 / M42-Mount 9.9 ▪ Mµtron LSFxxxx-S42 series (Art. No.: 11115200) www.qioptiq.com/machine-vision-lenses www.myutron.com Adapter M58 / M42-Mount 16.0 ▪ Opto-Engineering lenses with M42 mount 3. Remove the stickers (1). Screw in grub screws (loose) (2). 8. Fix lens mount adapter to camera with a torque of 0.1 Nm (Allen key M2). www.opto-e.com (Art. No.: 11204598) Bottom View ▪ ZVL-Interlock_Compact _2.8/21_M42 (11209330) 1. Bottom View 2. ▪ ZVL-Interlock_Compact _2.4/25_M42 (11209332) ▪ ZVL-Interlock_Compact _2/35_M42 Remove Adapter M58 / M42-Mount 18.0 (11209333) before use! ▪ ZVL-Interlock_Compact _2/50_M42 (Art. No.: 11209260) (11209319) Remove ▪ ZVL-Interlock_Compact _2.4/85_M42 before use! (11209334) https://www.zeiss.com/camera-lenses/int/auto- ! Only loose! mated-imaging.html Adapter M58 / M42-Mount 45.5 ▪ ZEISS Interlock 2/100 https://www.zeiss.com/camera-lenses/int/auto- 4. Set lens distance to infinity. Flange Focal Distance LX (Art. No.: 11137781) mated-imaging.html Adapter M58 / C-Mount ▪ C mount lenses in applications that require a (Scheimpflug 2.5°) 2.5° lens angle 5 (Art. No.: 11165019) ±0,2 12 5. Start live image acquisition with Baumer Camera Explorer..
Load more

Recommended publications
  • Carl Zeiss Oberkochen Large Format Lenses 1950-1972
    Large format lenses from Carl Zeiss Oberkochen 1950-1972 © 2013-2019 Arne Cröll – All Rights Reserved (this version is from October 4, 2019) Carl Zeiss Jena and Carl Zeiss Oberkochen Before and during WWII, the Carl Zeiss company in Jena was one of the largest optics manufacturers in Germany. They produced a variety of lenses suitable for large format (LF) photography, including the well- known Tessars and Protars in several series, but also process lenses and aerial lenses. The Zeiss-Ikon sister company in Dresden manufactured a range of large format cameras, such as the Zeiss “Ideal”, “Maximar”, Tropen-Adoro”, and “Juwel” (Jewel); the latter camera, in the 3¼” x 4¼” size, was used by Ansel Adams for some time. At the end of World War II, the German state of Thuringia, where Jena is located, was under the control of British and American troops. However, the Yalta Conference agreement placed it under Soviet control shortly thereafter. Just before the US command handed the administration of Thuringia over to the Soviet Army, American troops moved a considerable part of the leading management and research staff of Carl Zeiss Jena and the sister company Schott glass to Heidenheim near Stuttgart, 126 people in all [1]. They immediately started to look for a suitable place for a new factory and found it in the small town of Oberkochen, just 20km from Heidenheim. This led to the foundation of the company “Opton Optische Werke” in Oberkochen, West Germany, on Oct. 30, 1946, initially as a full subsidiary of the original factory in Jena.
    [Show full text]
  • AG-AF100 28Mm Wide Lens
    Contents 1. What change when you use the different imager size camera? 1. What happens? 2. Focal Length 2. Iris (F Stop) 3. Flange Back Adjustment 2. Why Bokeh occurs? 1. F Stop 2. Circle of confusion diameter limit 3. Airy Disc 4. Bokeh by Diffraction 5. 1/3” lens Response (Example) 6. What does In/Out of Focus mean? 7. Depth of Field 8. How to use Bokeh to shoot impressive pictures. 9. Note for AF100 shooting 3. Crop Factor 1. How to use Crop Factor 2. Foal Length and Depth of Field by Imager Size 3. What is the benefit of large sensor? 4. Appendix 1. Size of Imagers 2. Color Separation Filter 3. Sensitivity Comparison 4. ASA Sensitivity 5. Depth of Field Comparison by Imager Size 6. F Stop to get the same Depth of Field 7. Back Focus and Flange Back (Flange Focal Distance) 8. Distance Error by Flange Back Error 9. View Angle Formula 10. Conceptual Schema – Relationship between Iris and Resolution 11. What’s the difference between Video Camera Lens and Still Camera Lens 12. Depth of Field Formula 1.What changes when you use the different imager size camera? 1. Focal Length changes 58mm + + It becomes 35mm Full Frame Standard Lens (CANON, NIKON, LEICA etc.) AG-AF100 28mm Wide Lens 2. Iris (F Stop) changes *distance to object：2m Depth of Field changes *Iris：F4 2m 0m F4 F2 X X <35mm Still Camera> 0.26m 0.2m 0.4m 0.26m 0.2m F4 <4/3 inch> X 0.9m X F2 0.6m 0.4m 0.26m 0.2m Depth of Field 3.
    [Show full text]
  • T-Mount - Wikipedia
    4/1/2020 T-mount - Wikipedia T-mount The T-mount is a standard lens mount for cameras and other optical assemblies. The usual T-mount is a screw mount using a T-mount male 42×0.75 (42 mm diameter, 0.75 mm thread pitch) metric Type screw thread on the lens with a flange focal distance of 55 mm and a External diameter 42 mm mating female 42mm thread on a camera adapter or other optical component. This thread form is referred to as T-thread. (This Flange 55 mm should not be confused with the M42 lens mount which is also Connectors None 42 mm diameter, but has a 1 mm thread pitch. The T-thread is sometimes described as "M42x0.75," which is the usual manner in which to describe the thread.) The "T" is said to stand for Tamron or Taisei, a Japanese manufacturer that released in 1957 the first of a line of aftermarket camera lenses that fit 35 mm SLR cameras built by various manufacturers using their universal T-mount. On the first model, the mini T-mount used a M37×0.75 thread; Tamron's canonical M42×0.75 T-thread didn't appear on the market until about 1962. The company referred to it variously as a T-mount, T-thread, T-adapter, or a T-400, but not as a T-2, which is simply the name that Soligor used for its version of the T-adapter. The proprietary lens mount of each camera manufacturer was adapted to the T-mount thread with a simple adapter.
    [Show full text]
  • A Theoretical and Practical Introduction to Optics a Theoretical and Practical Introduction to Optics
    White Paper A Theoretical and Practical Introduction to Optics A Theoretical and Practical Introduction to Optics Be honest: do you really know how to calculate the focal length of a lens? If so, you are an exception to the rule and can stop reading here !! For the rest of you, here is a second chance. Back to square one "Piece of broken glass starts forest fire"– a common headline during the summer. But how could this have happened? Due to the enormous distance between the Earth and the Sun, the Sun only appears as a tiny point emitting parallel rays of light (figure 1a) Should these parallel rays pass through a lens (or a piece of glass, which has similar characteristics) the rays would meet behind the lens at what is called the focal point. But what happens if our point of light is so near to the lens that we can not assume to have parallel rays of light? They cross each other behind the focal point (figure 1b). If we take a look at the image of our point of light at the focal points position we will see a unclear blurred spot. And so the question arises- "what is focusing?". Focusing is to increase the distance between the focal plane and the lens until the focal plane and the junction of the rays overlap each other (figure 1c). Thus, for single points of light the situation is quite simple. But what happens to the image of screws, PCBs or plates of steel? From points of light to images A point of light does not necessarily originate directly from the sun, candles or lamps, it can also result from a reflection.
    [Show full text]
  • Lens Mount and Flange Focal Distance
    This is a page of data on the lens flange distance and image coverage of various stills and movie lens systems. It aims to provide information on the viability of adapting lenses from one system to another. Video/Movie format-lens coverage: [caveat: While you might suppose lenses made for a particular camera or gate/sensor size might be optimised for that system (ie so the circle of cover fits the gate, maximising the effective aperture and sharpness, and minimising light spill and lack of contrast... however it seems to be seldom the case, as lots of other factors contribute to lens design (to the point when sometimes a lens for one system is simply sold as suitable for another (eg large format lenses with M42 mounts for SLR's! and SLR lenses for half frame). Specialist lenses (most movie and specifically professional movie lenses) however do seem to adhere to good design practice, but what is optimal at any point in time has varied with film stocks and aspect ratios! ] 1932: 8mm picture area is 4.8×3.5mm (approx 4.5x3.3mm useable), aspect ratio close to 1.33 and image circle of ø5.94mm. 1965: super8 picture area is 5.79×4.01mm, aspect ratio close to 1.44 and image circle of ø7.043mm. 2011: Ultra Pan8 picture area is 10.52×3.75mm, aspect ratio 2.8 and image circle of ø11.2mm (minimum). 1923: standard 16mm picture area is 10.26×7.49mm, aspect ratio close to 1.37 and image circle of ø12.7mm.
    [Show full text]
  • Short Duration Manual Power Source
    Vision Systems Design Webinar 9 September 2015 How to Choose a Machine Vision Camera for Your Application. Andrew Bodkin Bodkin Design & Engineering, LLC Newton, MA 02464 617-795-1968 [email protected] www.bodkindesign.com Bodkin Design and Engineering Specializing in Imaging Systems System-level solutions draw on our expertise in: – Optics – Sensors – Photonics – Instrumentation – Opto-Mechanics – Electrical Engineering – Software – Mechanical Engineering – Spectroscopy – Physics 2 Machine Vision Measure optical phenomena – spatial location (size) – phase (transparent – reflectivity/absorption imaging) • color-imaging / – self emission spectroscopy (temperature) – stop motion / time studies – polarization (stress) 3 Front End • Common to all these systems are cameras – lenses • focal length, f/number, spatial resolution, depth of focus, telecentricity, uniformity – focal plane array • pitch, pixel count, color filter, read out sequence, bit depth, well depth, integration time, dynamic range • This webinar will explain how to select the components for the camera to match your application 4 Pinhole Imager The fundamental process of imaging • A ray of light passes through a pinhole and makes a spot • The sum of the spots is an image • All other systems are simply improvements on this fundamental imager 5 Definitions • Magnification=i/o, • Pixel field-of-view PFOV (radians) p=pixel pitch • Field-of-view FOV (radians) horizontal and vertical • Footprint (mm) • Pixel footprint (mm) 6 Layout of a Thin Lens 1. Light travels left to right
    [Show full text]
  • FFD for Canon, Nikon F & Z, Sony and Leica. Lens Possibilities for DSLR
    FFD as of 10/2018 FFD for Canon, Nikon F & Z, Sony and Leica. Lens possibilities for DSLR use on Arca-Swiss Universalis, MF2, Monolith, or Fline. This info is to let you understand the lens compatibility for DSLR use on view cameras such as the Arca-Swiss Universalis and MF Two DSLR. Minimum NET FFD REQUIRED FOR SOME CAMERAS: Nikon F 46.5mm from lens mount (flange) to sensor Nikon Z 16mm from lens mount (flange) to sensor Canon EF and EFS 44mm from lens mount (flange) to sensor Leica M 27.8mm from lens mount (flange) to sensor Sony A7 series 19.6mm from lens mount (flange) to sensor Pentax K series. 45.5mm from lens mount (flange) to sensor Hasselblad 500 and 2000 series 74.9mm from lens mount (flange) to sensor Hasselblad H 61.63mm from lens mount (flange) to sensor Fuji GFX MF camera 26.7 from lens mount to to sensor. Contax 645 64mm from lens mount (flange) to sensor Mamiya 645 63.30 from lens mount (flange) to sensor Pentax 645 70.87mm from lens mount (flange) to sensor Leica S 53mm from lens mount to sensor You need to know the flange focal distance for the lens,(FFD), less the flange distance to end of rear group. Compare and subtract this from body/mirror box/lens mount depth of body, shown above, of lens at infinity. The net number calculated for your lens, must be greater than the Net FFD, listed above, for your camera. Some examples: 23mm Rodenstock Apo-Digaron S FFD: Will not Work 28mm Rodenstock Apo-Digaron S FFD: Will not Work 28mm 5.6 L Schneider Super digitar FFD: 35.2 Flange to end of lens 20.5 yielding 14.70 Will not work! 28mm 2.8 Schneider Apo-Digitar L FFD: 67.7 Flange to lens end 18.4 yielding 49.30 OK for Sony and Canon EF & R, and Nikon Z **Gets physically so close to Nikon F it is not really useable at infinity with movements.
    [Show full text]
  • Lenses & Accessories
    LENSES & ACCESSORIES Oct 2014 Edition The essence of aesthetics Already pioneers in the field of digital single lens mirrorless cameras, LUMIX’s Micro Four Thirds lenses are once again breaking new ground. Combining state-of-the-art digital technology with cutting-edge optics, the new lenses offer uncompromising quality, exceptional image rendering, and an agility capable of capturing the most fleeting of moments, all in an amazingly compact format. From wide-angle to telephoto, the extensive range delivers top-class performance, whether you are shooting stills or high-quality HD video. Of one thing we are sure, this remarkable family of lenses will take your creativity to a new dimension. A Breakthrough in Size and Weight: A Digital Design that Delivers INDEX Mirrorless Configuration Beautiful Images from Corner to Corner LEICA Lens LUMIX G VARIO 7-14mm / F4.0 ASPH. p30 In developing LUMIX G, Panasonic set out When a 35mm camera lens is used on a digital SLR camera, p31 Mirror box LEICA DG NOCTICRON 42.5mm / F1.2 ASPH. / POWER O.I.S. p06 LUMIX G VARIO 12-32mm / F3.5-5.6 ASPH. / MEGA O.I.S. to create a digital SLR camera system with sharpness and light intensity can be lost and colors can LEICA DG SUMMILUX 15mm / F1.7 ASPH. p08 LUMIX G VARIO 14-42mm / F3.5-5.6 II ASPH. / MEGA O.I.S. p32 truly superior mobility. This meant that both bleed at the frame edges, where light enters at an angle. LEICA DG SUMMILUX 25mm / F1.4 ASPH. p10 LUMIX G VARIO 14-42mm / F3.5-5.6 ASPH.
    [Show full text]
  • The Basic Purpose of a Lens of Any Kind Is to Collect the Light Scattered by an Object and Recreate an Image of the Object on A
    Optics he basic purpose of a lens of any kind is to collect the light scattered by an object and recreate Tan image of the object on a light-sensitive ‘sensor’ (usually CCD or CMOS based). A certain number of parameters must be considered when choosing optics, depending on the area that must be imaged (field of view), the thickness of the object or features of interest (depth of field), the lens to object distance (working distance), the intensity of light, the optics type (telecentric/entocentric/pericentric), etc. The following list includes the fundamental parameters that must be evaluated in optics • Field of View (FoV): total area that can be viewed by the lens and imaged onto the camera sensor. • Working distance (WD): object to lens distance where the image is at its sharpest focus. • Depth of Field (DoF): maximum range where the object appears to be in acceptable focus. • Sensor size: size of the camera sensor’s active area. This can be easily calculated by multiplying the pixel size by the sensor resolution (number of active pixels in the x and y direction). • Magnification: ratio between sensor size and FoV. • Resolution: minimum distance between two points that can still be distinguished as separate points. Resolution is a complex parameter, which depends primarily on the lens and camera resolution. www.opto-engineering.com Optics basics Lens approximations and equations he main features of most optical systems can be calculated with a few parameters, provided that some approximation is accepted. TThe paraxial approximation requires that only rays entering the optical system at small angles with respect to the optical axis are taken into account.
    [Show full text]
  • Mamiya 7 Brochure
    Mamiy For years, serious photographers have desired a camera which produces the largest possible negative or transparency- yet is easily hand holdable. They wished for superb precision quality, dreamed of world class lenses, hoped for controllable exposure automation, a really whisper quiet shutter, a razor sharp focusing finder uncluttered by too much data - and unchallengeable accuracy in exposure. Mr/ mm 1 f • k p .^J The Mamiya 7 has made their dreams come true. Using standard 120 or 220 film, the compact Mamiya 7 delivers ideal format 6 x 7cm images. This large image area can be viewed with the naked eye, enlarges to photographic paper sizes and magazine formats without cropping and is 4-1/2 times larger "\>.;,! than 35mm images. Yet the Mamiya 7 handles like a "35"—and fits the photographer's hand like a glove. Truly, a dream come true. Mamiya 7, the ultimate 6x7 rangefinder camera. The Mamiya 7 is the only camera in the world that has these exclusive features: • Ideal 6 x 7cm film format that enlarges to standard photographic and industrial paper size; without cropping and without wasting film. A size that can be viewed with the naked eye and that is easy to retouch. • Lightweight, compact, "quick on the draw" and ergonomically designed to fit your hand like a glove. • Crisp, accurate, broad based, split-image rangefinder, that is easy to focus, even in poor light. • Bright viewfinder with frame lines that are automatically indexed to match the focal length of lens in use and that automatically adjust for parallax. • Interchangeable, world-class Mamiya lenses, utilizing the latest optical glasses and computer aided design and that take advantage of the camera's short flange focal distance (there is no mirror box) to reach new heights in lens quality.
    [Show full text]
  • MACRO ZOOM LENS C10x12fluorite 12-120Mm 1:2.2 Instructions
    Canon MACRO ZOOM LENS C10x12Fluorite 12-120mm 1:2.2 Instructions English Edition Canon MACRO ZOOM LENS C10x12Fluorite 12-120mm 1:2.2 The Canon Marco Zoom Lens CI0 x 12, 12-120mm 1: 2.2, Fluorite is an interchangeable lens for 16mm motion picture cameras. It is a new Canon-developed 10 x zoom lens. It is the first zoom lens using artificial fluorite and boasts high optical performance, including substantial reduction of chromatic aberrations. This new lens has a unique macrophotography function. When this function is used with the focal length set at 12mm, super-close-up photography is possible in which the distance between the object and the front vertex of the lens is only 1 millimeter (0.04 in.). Furthermore, when the macrophotography mechanism and zooming are used jointly, special photo­ graphic techniques become possible. 2 Optical Specifications Application: For 16mm motion picture camera Object Dimensions at Minimum Object Distance: Range of Focal Length: 12-120mm Wide 105 x 77cm Maximum Relative Aperture: 1: 2.2 Tele 10.7 x 7.8cm Zoom Ratio: 1: 10 Macro 50.5 x 36.2mm (at 1mm) Image Format Covered: 10.3 x 7.5mm 12.7mm dia. Distance from Focal Plane to Exit Pupil: - 178.7mm Angular Fields of View: Wide 46.9 ° x 34.6° Tele 4. r x 3.5 0 Minimum Object Distance: 1.5m (5 ft) from focal plane Using Macro Ring; Focal length I 12mm I 50mm I 120mm Object distance 1mm 45cm 104cm Sectional View of Optical System Focal Plane o --N >t-t+--+-----1Hf---- ------tl--+++----iH---t -1t-++-+t------+tI-lH (0 t-----------(157 .04) ------------+---33.66 t-----------------190.7--------------------------~ (Dimensions in mm) 3 Performance Data of Artificial Fluorite The Canon Macro Zoom Lens CI0 x 12 Fluorite incorpo­ 0.1 rates the same artificial fluorite as in Canon Lenses FL-F 300mm 1 : 5.6 and FL-F 500mm 1 : 5.6 high quality a telephoto lenses for single-lens reflex cameras which are 400 500 600 700m,u already on the market.
    [Show full text]
  • Lens Mount - Wikipedia, the Free Encyclopedia
    Lens mount - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Lens_mount From Wikipedia, the free encyclopedia A lens mount is an interface — mechanical and often also electrical — between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the rangefinder camera, single lens reflex type or any movie camera of 16 mm or higher gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C-mount or T-mount elements. A lens mount may be a screw-threaded type, a bayonet-type, or a breech-lock (friction lock) type. Modern still camera lens mounts are of female lens mount of an Minolta XD-7 the bayonet type, because the bayonet mechanism precisely aligns with male mount of Minolta mechanical and electrical features between lens and body. Screw-threaded MC-Rokkor 58mm 1:1.4 lens mounts are fragile and do not align the lens in a reliable rotational position, yet types such as the C-mount interface are still widely in use for other applications like video cameras and optical instrumentation. Bayonet mounts generally have a number of tabs (often three) around the base of the lens, which fit into appropriately sized recesses in the lens mounting plate on the front of the camera. The tabs are often "keyed" in some way to ensure that the lens is only inserted in one orientation, often by making one tab a different size.
    [Show full text]