DOCSLIB.ORG

Exhaust Repair Hardware

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Exhaust Repair Hardware Exhaust Repair EXHAUST REPAIR • Direct replacement for a proper fit every time • Durable steel construction • Repair kit helps to secure exhaust manifold to the vehicle HARDWARE engine head • Manufactured to strict engineering quality standards • Direct replacement for a proper fit every time Dorman Help Exhaust Manifold Stud DOR 03211CD • Durable steel construction • New hardware helps fix exhaust leaks • Also available in the Exhaust Manifold Hardware Kit • Rust and corrosion resistant Dorman Help Exhaust Stud Kit • Durable hardened and spring steel construction M12-1.75 x 62mm MTM 03129 Image Shown: 03129 • New hardware helps fix exhaust leaks Dorman Help Exhaust Stud Kit • Also available separately (where applicable) M10-1.5 x 62mm MTM 03133 Dorman Help Manifold Bolt and Spring Kit, Dorman Help Exhaust Stud Kit, M10-1.5 x 72mm MTM 03131 M8-1.25 x 76mm MTM 03143 • Constructed of durable spring steel • Rust and corrosion resistant • Rust and corrosion resistant • Durable hardened and spring steel construction • Also available in a kit that include the Exhaust Manifold Bolt • New hardware helps fix exhaust leaks • Easy installation • Also available separately (where applicable) Dorman Help Exhaust Flange Spring, 0.825 OD x 1.135 ID x 1.57 & 0.5 ID X .75 x OD 1.13" MTM 03084 Dorman Help Exhaust Flange Hardware MTM 03087CD • Direct replacement for a proper fit every • Direct replacement for a proper fit every time time • Durable steel construction • Durable steel construction • Repair kit helps to secure exhaust • A wide variety of kits are available that manifold to the vehicle engine head may contain any or all of the following: • Manufactured to strict engineering quality studs, nuts, and bolts standards • A rigorous quality inspection has been undertaken to ensure product standards Dorman Help Exhaust Manifold Mount Hardware, Dorman Help Exhaust Manifold Bolts DOR 03088CD M8-1.25mm MTM 03411 • Direct replacement for a proper fit every time • Direct replacement for a proper fit every time • Durable steel construction • Durable steel construction • Also available in the Exhaust Manifold Hardware Kit • Repair kit helps to secure exhaust manifold to the vehicle engine head • New hardware helps fix exhaust leaks • Manufactured to strict engineering quality Dorman Help Exhaust Manifold Hardware Kit, standards M10-1.25mm MTM 03400 Dorman Help Exhaust Manifold Hardware Dorman Help Exhaust Manifold Hardware Kit, Image Shown: 03400 Kit MTM 03218 3/8-16" MTM 03405 Dorman Help Exhaust Manifold Hardware Kit, 3/8-16" MTM 03401 • Direct replacement for a proper fit every time • Durable steel construction • New hardware helps fix exhaust leaks • New hardware helps fix exhaust leaks • Also available in the Exhaust Manifold Hardware Kit • Depending on the application, kits include hardware to securely attach the manifold to the exhaust system Dorman Help Exhaust Flange Hardware Kit MTM 03117 • Also available separately (where applicable) • Hardened steel construction for long-lasting durability Dorman Help Manifold Stud and Spring Kit, • Direct replacement for a proper fit every time M10-1.5 x 77mm MTM 03107 Image Shown: 03107 • Durable steel construction Dorman Help Manifold Bolt and Spring Kit, • Repair kit helps to secure exhaust manifold to 3/8-16 x 3.5" MTM 03110 the vehicle engine head Dorman Help Manifold Bolt and Spring Kit, • Manufactured to strict engineering quality M10-1.5 x 72mm MTM 03126 standards Dorman Help Manifold Bolt and Spring Kit, Dorman Help Exhaust Manifold Hardware Kit MTM 03413 M8-1.25 x 74mm MTM 03128 • Engineered from high-quality materials for long- • Direct replacement for a proper fit every time lasting durability • Durable steel construction • Quality tested for strength • New hardware helps fix exhaust leaks • Direct replacement for a proper fit every time • Also available in the Exhaust Manifold Hardware Kit • No special tools required Dorman Help Exhaust Stud Kit, M10-1.25 x 40mm MTM 03105 Dorman Help Intake Manifold Bolt DOR 03426 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order. CARQUEST® Auto Parts Service Lines Catalog 1 • Rust and corrosion resistant • Available in many different styles including hex nuts, flanged nuts, • Durable hardened and spring steel square nuts, wing nuts, and more construction • Available in a large variety of sizes, thread pitches, and quantities • New hardware helps fix exhaust leaks • Prevailing torque lock nuts and other types available for increased • Also available separately (where applicable) durability against high-heat conditions Exhaust Repair Dorman Help Pipe to Converter Spring Kit, • Also suitable for a broad variety of household, industrial and commercial uses M8-1.25 x 59mm MTM 03146 Dorman Help Hex Nuts, Metric Brass, M8-1.25x6 DOR 680-152CD • Available in many different styles including hex nuts, flanged nuts, square nuts, wing nuts, and more • Available in a large variety of sizes, thread pitches, and quantities • Prevailing torque lock nuts and other types available for increased EXHAUST REPAIR durability against high-heat conditions • Also suitable for a broad variety of household, industrial and commercial uses STAINLESS STEEL MUFFLER Dorman Help Copper Plated Hex Nut, M10-1.5 DOR 680-366CD CLAMPS EXHAUST REPAIR • Stainless Steel Exhaust Accessories are made from 409 stainless steel, which is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary STUD KITS application is automotive exhaust systems. • 3/8 U-Bolt w/ Flange Nut • Direct replacement for a proper fit every time Nickson 1-3/4" Stainless Steel Exhaust Clamp GOE 101 • Durable steel construction Nickson 1-7/8" Stainless Steel Exhaust Clamp GOE 102 Image • New hardware helps fix exhaust leaks Shown: • Also available in the Exhaust Manifold Hardware Kit Nickson 2" Stainless Steel Exhaust Clamp GOE 103 101 Dorman Help Exhaust Stud Kit, Nickson 2-1/8" Stainless Steel Exhaust Clamp GOE 106 3/8-16 x 2-1/2" & 3/8-16 x 3-1/4" MTM 03147 Nickson 2-1/4" Stainless Steel Exhaust Clamp GOE 104 Nickson 2-1/2" Stainless Steel Exhaust Clamp GOE 105 • New hardware helps fix exhaust leaks Nickson 2-3/4" Stainless Steel Exhaust Clamp GOE 98 • Depending on the application, kits include hardware to Nickson 3" Stainless Steel Exhaust Clamp GOE 107 securely attach the manifold to the exhaust system • Also available separately (where applicable) • Hardened steel construction for long-lasting durability Dorman Help Exhaust Flange Hardware Kit, M10-1.5 x 70mm MTM 03130 EXHAUST REPAIR • Direct replacement for a proper fit every time • Durable steel construction HEAVY DUTY MUFFLER • New hardware helps fix exhaust leaks • Also available in the Exhaust Manifold Hardware Kit Dorman Autograde Double Ended Stud, Image Shown: 29203 CLAMPS M8-1.25 x 16mm & M8-1.25 x 16mm MTM 29203 • These heavy duty clamps feature an 11 gauge saddle with Dorman Autograde Double Ended Stud, reinforced ribs. MTM 29224 M10-1.50 x 27mm & M10-1.50 x 12mm • They provide the do-it yourselfer with the same high quality, Dorman Autograde Double Ended Stud, leak free clamps that the professional installers use. 3/8-16 x 1-1/4" & 3/8-16 x 7/16" MTM 29200 • 3/8 U-Bolt w/ Flange Nut Dorman Autograde Double Ended Stud, Nickson 1-1/2" HD Exhaust Clamp, Boxed GOE 517112 3/16-16 x 1-5/8" & 3/8-16 x 3-1/4" MTM 29201 Nickson 1-5/8" HD Exhaust Clamp, Boxed GOE 517158 Image Shown: Nickson 1-3/4" HD Exhaust Clamp, Boxed GOE 517134 517112 • Direct replacement for a proper fit every time Nickson 1-7/8" HD Exhaust Clamp, Boxed GOE 517178 • Helps keep the exhaust system together Nickson 2" HD Exhaust Clamp, Boxed GOE 517200 • Durable brass construction • This part has undergone fitment thread testing to ensure Nickson 2-1/8" HD Exhaust Clamp, Boxed GOE 517218 conformance to product standards and quality Nickson 2-1/4 HD Exhaust Clamp, Boxed GOE 517214 Dorman Help Brass Hex Nut, 3/8-16" DOR 680-104CD Nickson 2-1/2" HD Exhaust Clamp, Boxed GOE 517212 Nickson 2-3/4 HD Exhaust Clamp, Boxed GOE 517234 • Available in many different styles including hex nuts, flanged nuts, Nickson 3" HD Exhaust Clamp, Boxed GOE 517300 square nuts, wing nuts, and more Nickson 3-1/2" HD Exhaust Clamp, Boxed GOE 517312 • Available in a large variety of sizes, thread pitches, and quantities • Prevailing torque lock nuts and other types available for increased Nickson 4" HD Exhaust Clamp, Boxed GOE 517400 durability against high-heat conditions • Also suitable for a broad variety of household, industrial and commercial uses Dorman Help Hex Nuts, Metric Brass, M10-1.25 DOR 680-154CD * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order. 2 CARQUEST®Auto Parts Service Lines Catalog EXHAUST REPAIR EXHAUST REPAIR Exhaust Repair STAINLESS STEEL BAND STAINLESS STEEL ADAPTERS • Stainless Steel Exhaust Accessories are made from 409 stainless CLAMPS steel, which is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary application is automotive • Pre-attached hardware for fast, easy, and accurate installation. exhaust systems. • Aluminum reaction block creates a complete inner circle seal when Nickson Stainless Steel Connector clamp is secured. 3" ID x 3" ID GOE 93582 • Bright finish, completely rustproof stainless steel band for long life. Nickson Flat Band Exhaust Clamp SS 2" GOE E20ST Nickson Flat Band Exhaust Clamp SS 2-1/4" GOE E22ST • Stainless Steel Exhaust Accessories are made from 409 stainless steel, which is a general purpose, chromium, Nickson Flat Band Exhaust Clamp SS 2-1/2" GOE E25ST titanium stabilized, ferritic stainless steel whose primary Nickson Flat Band Exhaust Clamp SS 3" GOE E30ST application is automotive exhaust systems.
Load more

Recommended publications
  • DMF Muffler Offers a New Level of Emission Reduction for 1991-2002 Model Year Diesel-Powered Engines
    A High Efficiency Emissions Retrofit Solution with No Maintenance – The Diesel Multi-stage Filter (DMF) Muffler The patented 1 Donaldson DMF Muffler offers a new level of emission reduction for 1991-2002 model year diesel-powered engines. As a tailpipe solution, this product will reduce your diesel PM emissions up to 60%! Reduce your total vehicle emissions even more with our patented 2 combination – the DMF Muffler and Spiracle™ Crankcase Filtration System. 1 U.S. Pat. No. 7,340,888 2 U.S. Pat No. 7,278,259; 7,257,942 High Efficiency Filtration with No Maintenance .... our DMF Mufflers DO NOT require routine ash cleaning Partial Flow Through Filter Broad Engine Coverage The DMF Muffler uses a two- • Approved for four-stroke on-road diesel engine applications stage metallic filter to trap with engine horsepower ranges of 150-600 hp and reduce diesel particulate - 1991-1993 model year engines (0.25 g/bhp-hr PM or less) matter (PM). Each filter with exhaust temperatures of 230º C for 40% of the time stage consists of alternating and average exhaust temperature of 215º C or above layers of a corrugated metal and a porous sintered metal - 1994-2002 model engines (0.10 g/bhp-hr PM or less) fleece. The unique catalyst with exhaust temperatures of 210º C for 40% of time and coating reduces PM, HC and average exhaust temperature of 210º C or above CO, while minimizing NO2 • For even more emissions reduction, consider ordering a emissions (<20% increase). kit that includes the Donaldson closed crankcase filtration system - Spiracle™ and DMF Muffler.
    [Show full text]
  • Flowmaster Exhaust Systems Are Designed Vehicle Specific and Do Not Violate the Manufacturer’S Factory Warranty
    2016 MUFFLERS // SYSTEMS // HEADERS // CATALYTIC CONVERTERS // TIPS & ACCESSORIES FLOWMASTER MANUFACTURING Shown in a rare quiet moment, Flowmaster’s state-of-the-art manufacturing plant in Northern California features many self-designed tools and high-tech robotics to build the world’s most advanced mufflers. For over three decades, Flowmaster has led the way in automotive performance exhaust technology with some of the earliest product patents held by an exhaust manufacturer. As the world’s first fully welded muffler in 1983, Flowmaster raised the bar for durability and strength, while singlehandedly reinventing the performance exhaust industry. Today, we maintain that edge with constant innovation in exhaust solutions for street, race, and off-road applications. 2 WWW.FLOWMASTERMUFFLERS.COM TECHNOLOGY CAR APP 05 12 HEADERS TRUCK APP 06 34 CONVERTERS MUFFLERS 08 50 RACE PARTS Tech Support: 1-707-544-4761 www.flowmastermufflers.com 66 ACCESSORIES 72 The Exclusive Performance Exhaust Of NASCAR INFO / FAQ FIND US ON: 80 NOTE: Flowmaster’s muffler recommendations are based on OEM configurations, but are not considered direct-fit replacements. Our universal mufflers may require modification during installation. Additional muffler options may apply outside of these recommendations. Should you have any questions, call our tech line for further assistance in selecting a system or muffler. WWW.FLOWMASTERMUFFLERS.COM 3 ABOUT THE COMPANY For over 30 years, Flowmaster has been the leader in advanced exhaust technology through our extensive commitment to research and development. Early on we learned that by understanding an engine’s total operation, we could not only generate a terrific performance exhaust sound, but more importantly increase combustion efficiency and improve both performance and fuel mileage.
    [Show full text]
  • Exhaust/Emissions Systems Overview Emissions Testing
    Exhaust/Emissions Systems Overview Below is an overview of this system's operation Emissions Testing Many states require emissions tests on vehicles. This means that you drive to a facility where the test people take a sample of your emissions and run it through some analysis. The results are printed,and you pass or fail depending on the percentage of toxic emissions that turn up in your car's sample. The only way to "study" or prepare for this test is to take good care of your car, including its emission system. If you use preventative maintenance, and keep your car tuned properly, you will pass. If you tamper with your emissions system, you will not pass. You can have your car checked independently before your emissions test if you want to resolve problems before going to the emissions test station. One other good thing to do is to save your printouts from the test from year to year. If you compare them, you will be able to monitor your car (if its score is getting worse) and catch any problems before the emissions people catch you. The Emission Control System The purpose of the emission control system is just that; it controls the emissions and exhaust from your vehicle. The idea is to turn the harmful gases your car manufactures into harmless ones that don't ruin the environment, or us. Some of the problem gases are: • hydrocarbons (unburned) • carbon monoxide • carbon dioxide • nitrogen oxides • sulfur dioxide • phosphorus • lead and other metals To help control these substances, we (along with federal regulations) have made changes in our gasoline to eliminate them.
    [Show full text]
  • Exhaust Muffler Design Principles
    3.0 Exhaust Muffler Design Principles 3.1 Basic Concepts Internal combustion engines are typically equipped with an exhaust muffler to suppress the acoustic pulse generated by the combustion process. A high intensity pressure wave generated by combustion in the engine cylinder propagates along the exhaust pipe and radiates from the exhaust pipe termination. The pulse repeats at the firing frequency of the engine which is defined by f=(engine rpm x number of cylinders)/120 for a four stroke engine. The frequency content of exhaust noise is dominated by a pulse at the firing frequency, but it also has a broadband component to its spectrum which extends to higher frequencies. Measurements of the exhaust pipe pressure pulse on a Continental O- 200 engine [4] show that the majority of the pulse energy lies in the frequency range of 0- 600 Hz. Exhaust mufflers are designed to reduce sound levels at these frequencies. In general, sound waves propagating along a pipe can be attenuated using either a dissipative or a reactive muffler. A dissipative muffler uses sound absorbing material to take energy out of the acoustic motion in the wave, as it propagates through the muffler. Reactive silencers, which are commonly used in automotive applications, reflect the sound waves back towards the source and prevent sound from being transmitted along the pipe. Reactive silencer design is based either on the principle of a Helmholtz resonator or an expansion chamber, and requires the use of acoustic transmission line theory. In a Helmholtz resonator design a cavity is attached to the exhaust pipe.
    [Show full text]
  • Kit Name: KM4 729989-13100 Muffler Kit 1 1 129944-13520
    Kit Name: KM4 YANMAR CO., LTD. YANMAR AMERICA CORP. Item Part No. Description Quantity Remarks 729989-13100 Muffler Kit 1 1 129944-13520 Muffler Kit 1 2 129944-13660 Stay, muffler 1 3 129930-13201 Gasket, Muffler 1 4 123925-13600 Pipe Assy, Tail 1 5 129989-13660 Bracket, muffler 1 6 26306-080002 Nut, M8x1.25 (Flanged hex head) 10 7 26106-080202 Bolt, M8x1.25 - 20 (Flanged hex head) 8 7 5 MODELS 4TNV98-GGE 4TNV98-NSA 1 4TNV98-ZNSA 4 6 3 6 2 7 Notes: Parts code is not assigned to non-serviceable component parts. Remarks: KM4 - MUFFLER KIT PAGE 1 OF 2 INS-KM4-0011 YANMAR CO., LTD. YANMAR AMERICA CORP. Installation Instructions WARNING: DO NOT INSTALL THE KIT WHILE THE ENGINE IS STILL HOT Hand tighten all bolts and nuts until the assembly is completed, then torque to the specifications in Table 1 below. 1. Place the exhaust gasket included with the engine on the exhaust manifold flange studs. 2. Mount the Muffler (1) on the exhaust manifold flange studs so that the outlet faces the radiator, secure using the M8x1.25 flange nuts (6). NOTE: For Step 3, if the Yanmar radiator kit is already installed on the engine it will be necessary to remove the upper mounting bracket from the cylinder head to install the Muffler Bracket (5) for the Muffler. 3. Fasten the Muffler Bracket (5) and the upper radiator mount to the cylinder head using the provided M8x1.25 - 20 bolts 4. Mount the Bracket Stay (2) to the cylinder head and Muffler (1) using the M8x1.25 - 20 bolts (7).
    [Show full text]
  • DESIGN MODIFICATION and ANALYSIS of ENGINE EXHAUST MANIFOLD S.B.Borole1, Dr
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 03 Issue: 09 | Sep-2016 www.irjet.net p-ISSN: 2395-0072 DESIGN MODIFICATION AND ANALYSIS OF ENGINE EXHAUST MANIFOLD S.B.Borole1, Dr. G.V.Shah2 [email protected] [email protected] Mechanical Engineering Department, P.V.P.I.T. Bavdhan, Pune University, Pune, Maharashtra, India ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - This study focuses on the development of a thermal stresses while welding [4]. This stresses weakens reliable approach to predict failure of exhaust system fitting the materials, produces the defects, which can take shape of and on the removal of structural weaknesses through the small pieces of material, weld spatter, may loose and end up optimization of design. The task with this project was to find a destroying the catalytic converter [5]. Other defects can new solution concept for the connection of pipes into flanges in occur in the welding seam and they must be repaired manifolds. The concept that uses today for their manifolds is manually. However, the manifold should not be based on welding the pipes into place in the flange. The manufactured by casting, because the high temperatures in product development model that is used in this project is present combustion engines demand more expensive and written by Fredy Olsson. For this project have the parts high quality materials that causes problem when casting [7] “Principal construction” and” Primary construction” been [2]. The goal in the development of exhaust system fitting is used. to analyze several solutions weldless. The solutions that are The Objective is to present experimentation, modeling subject for further development are prepared during the and analysis of exhaust system fitting weldless by using FEA.
    [Show full text]
  • 2014 Yamaha SR Viper with Excell Stainless Muffler and XV7 Intake Mod
    2014 Yamaha SR Viper with Excell Stainless muffler and XV7 intake mod. Jim Czekala Aaron Excell of Hubbardsville, NY (www.excellmotorsports.com and www.excellmotorsportspark.com ) brought his new stainless steel glasspack muffler and “XV7” intake mods to DynoTech Research to test on a new Yamaha 2014 SR Viper. Aaron had come to DTR last winter with a beautifully fabricated prototype stainless steel equal length long tube header to test on the Viper, only to be disappointed in the results with either the stock or free flowing Excell muffler. During that session, it became obvious that the biggest gain resulted from reducing exhaust backpressure of the stock muffler. It seems like the three cylinder Yamaha engine’s stock header is well tuned for operation in the 6000-9000 RPM range. With that information, Aaron redirected his efforts to creating intake mods that would remain quiet yet increase airflow, torque and HP without a substantial increase in intake noise. One part of the Excell XV7 intake kit is three machined billet aluminum velocity stacks that would prove to add lots of midrange airflow, torque and HP. And importantly, Aaron created an outside air intake that will drastically reduce intake temperature/ air density and increase actual observed (uncorrected) horsepower. Remember, the rule of thumb is that we gain 1% observed horsepower for every 10 degree F drop in intake charge temperature! While we don’t know the actual intake air temperature of the Viper in winter riding, it’s safe to say the stock airbox intake temperature is much higher than outside air.
    [Show full text]
  • Mopar Perf Parts Catalog.Pdf
    AT MOPAR ®, WE TURN CARS INTO SOMETHING MORE. INTO SOMETHING YOU PASS ON. INTO MYTH. INTO A LEGEND. EVERY PART IS PART OF A LEGACY. AND THAT LEGACY IS YOURS. DODGE CHALLENGER DODGE VIPER 8 Air Induction Systems 38 Brakes 06 9 Exhaust Systems 36 39 Suspension and Steering 10 Suspension Upgrades and Components 39 Wheels 12 Shaker Hoods and Kits 12 T/A Performance Hoods and Components 14 Wheels CHRYSLER 300 42 Air Induction Systems 15 Brakes 40 42 Exhaust Systems 16 Stage Packages 43 Filter 17 Bee-Liever Packages 44 Suspension Upgrades and Components 17 Powertrain Control Modules 46 Stage Performance Packages 17 Filter 47 Brakes DODGE CHARGER 47 Powertrain Control Modules 20 Air Induction Systems RAM 1500 18 20 Exhaust Systems 50 Air Induction Systems 21 Brakes 48 51 Exhaust Systems 21 Wheels 52 Suspension Upgrades and Components 22 Suspension Upgrades and Components 54 Leveling Kits 24 Stage Packages 55 Wheels 25 Bee-Liever Packages 25 Powertrain Control Modules 25 Filter RAM 2500/3500 58 Winch & Mounting Components 56 58 Leveling Kits DODGE DURANGO 59 Lift Kits 28 Air Induction 59 Steering 26 29 Exhaust Systems 29 Suspension Upgrades PERFORMANCE DODGE DART 60GAUGES & LIGHTS 32 Air Induction Systems 62 Gauges 30 32 Exhaust Systems 65 Gauge Pods 33 Performance Hood and Venting 66 SilverStar Lighting 34 Aerodynamics 35 Brakes 35 Suspension Upgrades LIMITED 35 Wheels *Many images shown throughout the catalog are representative 68WARRANTIES of the product. Actual product may vary. WHY US? THAT’S A GOOD QUESTION. For starters, we were there when your car was just a sparkle in a designer’s eye.
    [Show full text]
  • Catalytic Converter (PDF)
    UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, D.C. 20460 Mb8 131991 OFFICE OF AIR AND- RADIATION To whom may it concern: As you know, the Clean Air Act was amended on November 15, 1990. Several of the changes in the Amendments affect the automotive repairfservice industry directly. These changes include the expansion of the tampering prohibition to include private individuals and the prohibition against the manufacture, installation, sale or offering for sale of any part or component used on any motor vehicle or motor vehicle engine where a principal effect is to bypass, defeat, or render inoperative any emission control device or element of design of any emission control system. The enclosed Fact Sheet: Exhaust Svstem ReDair Guidelines has been revised to Conform to the new provisions of the Clean Air Act and represents a change in our enforcement policy with regard to exhaust repair. This change is effective immediately. Essentially, the changes in these guidelines reflect EPA'S position that any pipe used to replace the section of exhaust where the catalytic converter should be, would be considered illegal under the revised Clean Air Act. Therefore, any work in this area of the exhaust system must include proper converter replacement. Other informational materials will be revised to reflect-the Clean Air Act Amendments and will be distributed and made available when they are completed. These other materials include pamphlets - on the tampering prohibition, revised engine switching fact sheet, and possibly a revision of our enforcement policy statement (Memorandum lA) andfor guidance on which parts EPA considers to be illegal.
    [Show full text]
  • Accessories Gasket Identification Charts
    ACCESSORIES GASKET IDENTIFICATION CHARTS Figure 1 Figure 2 (Continued) Figure 3 (Continued) Gasket No. A B Gasket No. A B 31390 2Z\v 2M\, 31610 2CZ\cx B\cx A B 31553 2C\cx 2M\zn 31612 2CM\nv B\cx 31559 2Z\zn 2ZC\zn 31616 2B\, C\zn 31571 ZC\zn M\zn 31628 C\zn C\zn Gasket No. A B 2 4 2 31582 2 2C\, 31629 2CZ\cx C\zn 31301 2Z\, 2M\, 31589 2Z>\cx 3ZC\cx 31631 2M\zn C\, 31307c 2Z\v 3Z\x 31595 C\cx B\nv 31633 >\cx C\zn 31309 1M\, 3 2 3 2 31599 >\cx C\, 31634 C\zn 31310 2 3Z\x 2 3 3 Z\x 31311 2M\zn 3X>\cx 31611 2ZC\zn 3M\cx 31639 2C\, 31313 2Z\zn 3C\, 31638 3 3ZC\zn 31656 1M\zn C\zn 31335 XC\cx 2 2 31641 2 4 31670 2Z\x Z\zn 31336c Z\, Z\x 2 3 * 31650 2M\zn 3Z\v 31696 5 C\zn 31337 2Z\x 4 31711 2Z\x 3 31703 3 C\zn 31356 1Z\x 2ZC\zn 31723 5 5Z\v c Shipped in lots of 10 - Std. Carton. 31367c 2 3C\zn 31726 M\, >\zn 31386 2Z\v 3Z\x* 2 3 31727 M\, B\, 31388 2 3ZZ\cx 2 3 31512 2B\, 4Z\v 31728 2Z\v 3ZC\cx 31532 2C\, 4B\zn 31737 2Z>\cx 3C>\nv Figure 4 31534 Z\, B\, 2 3 36491 4 5Z\v 31537 C\, B\, 2 3 36496 4Z\x 5Z\v 31540 ZB\cx Z\, 2 4 Figure 3 B 31547 M\zn ZM\cx 2 3 B 31560 2Z\zn 4B\zn 31564 C\v 1Z\x* A A 31574 3Z\cx 5B\cx 31578 2XB\nv 4>\nv 31605 2ZC\zn 5B\cx Gasket No.
    [Show full text]
  • Analysis and Design of a Semi-Active Muffler
    Analysis and design of a semi-active muffler PETTER SVANBERG Master of Science Thesis Work in Sound, Vibrations and Signals Stockholm October 2011 Abstract In this work, a flow reversal resonator fitted with a short-circuit duct connecting the inlet and outlet is analysed and used as a tuneable muffler element, aimed to be used use in a semi-active muffler on an IC-engine. The work done can be divided into 3 main parts. 1), a study of what type of valve that could be used to change the acoustical properties of the short-circuit duct. 2), Design of a flow reversal resonator with a controllable valve as the short-circuit. 3), experimental validation in a flow acoustic test rig. The flow reversal resonator with a controllable valve as short-circuit is successfully validated to work as tuneable muffler element during laboratory conditions. The same valve concept is simulated in a full scale concept but not validated experimentally on a running IC-engine. The theory used to describe the acoustics of a flow duct element is also presented together with three simulation techniques and the two microphone technique used to determine the acoustic properties of the investigated flow reversal resonator. Acknowledgement First of all, I want to thank my supervisors, Ragnar Glav at Scania, Mikael Karlsson at SWENOX and Mats Åbom at MWL-KTH for their great support during this work. I have learned a lot and developed my acoustic and engineering skills. I also want to thank Danilo Prelevic at the MWL laboratory for his helpfulness and skills in constructing prototypes and Andreas Holmberg at MWL-KTH for useful tips during the measurements.
    [Show full text]
  • Chrysotile Asbestos Exposure Associated with Removal of Automobile Exhaust Systems (Ca
    Journal of Exposure Science and Environmental Epidemiology (2006) 16, 156–171 r 2006 Nature Publishing Group All rights reserved 1559-0631/06/$30.00 www.nature.com/jes Chrysotile asbestos exposure associated with removal of automobile exhaust systems (ca. 1945–1975) by mechanics:Results of a simulation study DENNIS J. PAUSTENBACH,a AMY K. MADL,a ELLEN DONOVAN,a KATHERINE CLARK,a KURT FEHLINGa AND TERRY C. LEEb aChemRisk, Inc., San Francisco, CA, USA bCarolina EHS, Lake Wylie, SC, USA For decades, asbestos-containing gaskets were used in virtually every system that involved the transport of fluids or gases. Prior to the mid-1970s, some automobile exhaust systems contained asbestos gaskets either at flanges along the exhaust pipes or at the exhaust manifolds of the engine. A limited number of automobile mufflers were lined with asbestos paper. This paper describes a simulation study that characterized personal and bystander exposures to asbestos during the removal of automobile exhaust systems (ca. 1945–1975) containing asbestos gaskets. A total of 16 pre-1974 vehicleswith old or original exhaust systems were studied. Of the 16 vehicles, 12 contained asbestos gaskets in the exhaust system and two vehicles had asbestos lining inside the muffler. A total of 82 samples (23 personal, 38 bystander, and 21 indoor background) were analyzed by Phase Contrast Microscopy (PCM) and 88 samples (25 personal, 41 bystander, and 22 indoor background) by Transmission Electron Microscopy (TEM). Only seven of 25 worker samples analyzed by TEM detected asbestos fibers and 18 were below the analytical sensitivity limit (mean 0.013 f/cc, range 0.001–0.074 f/cc).
    [Show full text]