PROGRAMUL DE STANDARDIZARE NAŢIONALĂ 2021 În conformitate cu prevederile legislaţiei naţionale privind activitatea de standardizare şi cu cerinţele Regulamentului European 1025/2012, ASRO a publicat Programul de Standardizare Naţională (PSN) pentru anul 2021. Programul de Standardizare Naţională este planul de lucru al organismului naţional de standardizare care conţine lista de teme ce fac obiectul lucrărilor sale de standardizare. Temele cuprinse în PSN 2021 sunt cele propuse a fi realizate în anul în curs.

1 CUPRINS

SECȚIUNEA 1 CAPITOLUL 1 Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române �������������������������������������������������������������������������������������������������� 3 CAPITOLUL 2 Standarde europene propuse a se adopta ca standarde române prin publicarea notei de confirmare ���������������������������������������������������������������������������������������������9

SECȚIUNEA 2 Standarde europene armonizate propuse a se adopta ca standarde române prin publicarea versiunii române ������������������������������������������������������������������������������������������������ 43

SECȚIUNEA 3 CAPITOLUL 1 Proiecte de standarde europene CEN-CENELEC cu faze de vot în 2021 ������������������������������������������52 CAPITOLUL 2 Proiecte de standarde internaţionale ISO-IEC cu faze de vot în 2021 ��������������������������������������������88

SECȚIUNEA 4 CAPITOLUL 1 Standarde române originale în vigoare propuse a fi supuse procedurii de examinare ������������������ 97 CAPITOLUL 2 Teme de standarde române originale noi propuse a fi elaborate �������������������������������������������������99

SECȚIUNEA 5 CAPITOLUL 1 Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin publicarea versiunii române ���������������������������������������������������������������������������������������������� 100 CAPITOLUL 2 Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare �������������������������������������������������������������������������������������������������102

LEGENDA ����������������������������������������������������������������������������������������������������������������������������������104

2 SECȚIUNEA 1 CAPITOLUL 1

Standarde europene propuse a se adopta ca standarde române prin publicarea versiunii române

Nr crt Minister CT Indicativ EN Titlu TC

Measurement of fluid flow by means of pressure differential devices 1 ANRE 109 EN ISO 5167-3:2020 inserted in circular cross-section conduits running full - Part 3: Nozzles CEN/SS F05 and Venturi nozzles (ISO 5167-3:2019) Measurement of fluid flow by means of pressure differential devices 2 ANRE 109 EN ISO 5167-4:2003 inserted in circular cross-section conduits running full - Part 4: Venturi CEN/SS F05 tubes (ISO 5167-4:2003) 3 ANRE 167 EN 60038:2011 CENELEC standard voltages CLC/TC 8X 4 ANRE 176 EN 60743:2013 Live working - Terminology for tools, devices and equipment CLC/TC 78 Live working - Minimum approach distances for a.c systems in the volt- 5 ANRE 176 EN 61472:2013 CLC/TC 78 age range 72,5 kV to 800 kV - A method of calculation Information technology - Security techniques - Information security man- 6 MCID 208 EN ISO/IEC 27000:2020 CEN/CLC/JTC 13 agement systems - Overview and vocabulary (ISO/IEC 27000:2018) Information technology - Security techniques - Requirements for bodies 7 MCID 208 EN ISO/IEC 27006:2020 providing audit and certification of information security management CEN/CLC/JTC 13 systems (ISO/IEC 27006:2015, including Amd 1:2020) 8 MDLPA 321 EN 12390-7:2019/AC:2020 Testing hardened concrete - Part 7: Density of hardened concrete CEN/TC 104 11 MEAT 103 EN ISO 3071:2020 Textiles - Determination of pH of aqueous extract (ISO 3071:2020) CEN/TC 248 Petroleum, petrochemical and natural gas industries - Life cycle costing 12 MEAT 169 FprEN ISO 15663 CEN/TC 12 (ISO/FDIS 15663:2020) Petroleum, petrochemical and natural gas industries - Sector-specific 13 MEAT 169 EN ISO 29001:2020 quality management systems - Requirements for product and service CEN/TC 12 supply organizations (ISO 29001:2020) Petroleum and related products from natural or synthetic sources - De- 14 MEAT 320 EN ISO 3015:2019 CEN/TC 19 termination of cloud point (ISO 3015:2019) Petroleum and related products from natural or synthetic sources - De- 15 MEAT 320 EN ISO 3016:2019 CEN/TC 19 termination of pour point (ISO 3016:2019) Petroleum products - Transparent and opaque liquids - Determination of 16 MEAT 320 EN ISO 3104:2020 CEN/TC 19 kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2020) Produits pétroliers et connexes - Fidélité des méthodes de mesure et de 17 MEAT 320 EN ISO 4259-1:2017/A2:2020 leurs résultats - Partie 1:Détermination des valeurs de fidélité relatives CEN/TC 19 aux méthodes d'essai AMENDEMENT 2 (ISO 4259-1:2017/Amd 2:2020) Petroleum and related products - Precision of measurement methods 18 MEAT 320 EN ISO 4259-3:2020 and results - Part 3: Monitoring and verification of published precision CEN/TC 19 data in relation to methods of test (ISO 4259-3:2020) Petroleum products - Determination of the ignition quality of diesel fuels 19 MEAT 320 EN ISO 5165:2020 CEN/TC 19 - Cetane engine method (ISO 5165:2020) Petroleum products - Gum content of fuels - Jet evaporation method (ISO 20 MEAT 320 EN ISO 6246:2017 CEN/TC 19 6246:2017) Liquefied petroleum gases - Calculation method for density and vapour 21 MEAT 320 EN ISO 8973:1999/A1:2020 CEN/TC 19 pressure - Amendment 1 (ISO 8973:1997/Amd 1:2020) Diesel fuel - Assessment of lubricity using the high-frequency reciprocat- 22 MEAT 320 EN ISO 12156-1:2018 CEN/TC 19 ing rig (HFRR) - Part 1: Test method (ISO 12156-1:2018) Petroleum products - Determination of aromatic hydrocarbon types in 23 MEAT 320 EN 12916:2019 middle distillates - High performance liquid chromatography method with CEN/TC 19 refractive index detection Liquid petroleum products - Determination of ignition delay and derived 24 MEAT 320 EN 16144:2012 cetane number (DCN) of middle distillate fuels - Fixed range injection CEN/TC 19 period, constant volume combustion chamber method Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and 25 MEAT 320 EN 16715:2015 CEN/TC 19 combustion delay determination using a constant volume combustion chamber with direct fuel injection Liquid petroleum products - Determination of the total volatile sulfur 26 MEAT 320 EN 17178:2019 content in liquefied petroleum gases by ultraviolet fluorescence spec- CEN/TC 19 troscopy

3 Petroleum products - Determination of sulfur content of automotive 27 MEAT 320 EN ISO 20846:2019 CEN/TC 19 fuels - Ultraviolet fluorescence method (ISO 20846:2019) Gas analysis - Contents of certificates for calibration gas mixtures - 28 MEAT 357 EN ISO 6141:2015/A1:2020 Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC CEN/SS N21 17025:2017 (ISO 6141:2015/Amd 1:2020) Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimet- 29 MEAT 357 EN ISO 6142-1:2015 CEN/TC 238 ric method for Class I mixtures (ISO 6142-1:2015) Gas analysis - Preparation of calibration gas mixtures using dynamic 30 MEAT 357 EN ISO 6145-1:2019 CEN/TC 238 methods - Part 1: General aspects (ISO 6145-1:2019) Gas analysis - Preparation of calibration gas mixtures using dynamic 31 MEAT 357 EN ISO 6145-6:2017 CEN/TC 238 methods - Part 6: Critical flow orifices (ISO 6145-6:2017) Specification of liquefied natural gas as a fuel for marine applications 32 MEAT 357 EN ISO 23306:2020 CEN/TC 408 (ISO 23306:2020) Petroleum and natural gas industries - Installation and equipment for 33 MEAT 357 EN ISO 28460:2010 liquefied natural gas - Ship-to-shore interface and port operations (ISO CEN/TC 282 28460:2010) Energy management system application program interface (EMS-API) - 34 MEnergie 140 EN 61970-1:2006 CLC/TC 57 Part 1: Guidelines and general requirements Hydrogen fuel - Product specification and quality assurance - Proton 35 MEnergie 147 EN 17124:2018 CEN/TC 268 exchange membrane (PEM) fuel cell applications for road vehicles Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 36 MEnergie 147 EN ISO 20421-2:2017 CEN/TC 268 2: Operational requirements (ISO 20421-2:2017) LPG equipment and accessories - Transportable refillable LPG cylinders 37 MEnergie 231 EN 12816:2010 CEN/TC 286 - Disposal 38 MEnergie 231 EN 12979:2002 Automotive LPG-systems - Installation requirements CEN/TC 286 39 MEnergie 231 EN 13109:2010 LPG equipment and accessories - LPG tanks and drums - Disposal CEN/TC 286 40 MEnergie 231 EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders CEN/TC 286 LPG equipment and accessories - Pressure relief valves for transportable 41 MEnergie 231 EN 13953:2020 CEN/TC 286 refillable cylinders for Liquefied Petroleum Gas (LPG) LPG equipment and accessories - Construction and performance of LPG 42 MEnergie 231 EN 14678-2:2007+A1:2012 equipment for automotive filling stations - Part 2: Components other CEN/TC 286 than dispensers and installation requirements Gas cylinders - Quick-release cylinder valves - Specification and type 43 MEnergie 231 EN ISO 17871:2020 CEN/TC 23 testing (ISO 17871:2020) Natural gas - Determination of mercury - Part 1: Sampling of mercury by 44 MEnergie 357 EN ISO 6978-1:2005 CEN/TC 238 chemisorption on iodine (ISO 6978-1:2003 ) Natural gas - Determination of mercury - Part 2: Sampling of mercury by 45 MEnergie 357 EN ISO 6978-2:2005 CEN/TC 238 amalgamation on gold/platinum alloy (ISO 6978-2:2003) Installations and equipment for liquefied natural gas - Testing of insulat- 46 MEnergie 357 EN 12066:1997 CEN/TC 282 ing linings for liquefied natural gas impounding areas Installations and equipment for liquefied natural gas - Suitability testing 47 MEnergie 357 EN 12838:2000 CEN/TC 282 of LNG sampling systems Guarantees of Origin related to energy - Guarantees of Origin for Elec- 48 MEnergie 392 EN 16325:2013+A1:2015 CEN/CLC/JTC 14 tricity Energy measurement and monitoring plan - Design and implementation - 49 MEnergie 392 EN 17267:2019 CEN/CLC/JTC 15 Principles for energy data collection 50 MMAP 26 EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications CLC/SR 29 Acoustics - Measurement of airborne noise emitted by information tech- 51 MMAP 274 EN ISO 7779:2018 CEN/TC 211 nology and telecommunications equipment (ISO 7779:2018) Acoustics - Laboratory tests on noise emission from appliances and 52 MMAP 276 EN ISO 3822-3:2018 equipment used in water supply installations - Part 3: Mounting and CEN/TC 126 operating conditions for in-line valves and appliances (ISO 3822-3:2018) Acoustics - Determination of airflow resistance - Part 1: Static airflow 53 MMAP 276 EN ISO 9053-1:2018 CEN/TC 126 method (ISO 9053-1:2018) Acoustics - Determination of airflow resistance - Part 2: Alternating 54 MMAP 276 EN ISO 9053-2:2020 CEN/TC 126 airflow method (ISO 9053-2:2020) Acoustics - Laboratory and field measurement of the flanking transmis- sion for airborne, impact and building service equipment sound between 55 MMAP 276 EN ISO 10848-5:2020 CEN/TC 126 adjoining rooms - Part 5: Radiation efficiencies of building elements (ISO 10848-5:2020) Acoustics - Determination and application of measurement uncertainties 56 MMAP 276 EN ISO 12999-2:2020 CEN/TC 126 in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020) Acoustics - Field measurement of sound insulation in buildings and of 57 MMAP 276 EN ISO 16283-2:2020 CEN/TC 126 building elements - Part 2: Impact sound insulation (ISO 16283-2:2020) Soil quality - Assessment of impact from soil contaminated with petro- 58 MMAP 285 EN ISO 11504:2017 CEN/TC 444 leum hydrocarbons (ISO 11504:2017) Soil quality - Characterization of contaminated soil related to groundwa- 59 MMAP 285 EN ISO 15175:2018 CEN/TC 444 ter protection (ISO 15175:2018)

4 60 MMAP 285 EN ISO 25177:2019 Soil quality - Field soil description (ISO 25177:2019) CEN/TC 444 Adaptation to climate change - Principles, requirements and guidelines 61 MMAP 323 EN ISO 14090:2019 CEN/SS S26 (ISO 14090:2019) Soil quality - Conceptual site models for potentially contaminated sites 62 MMAP 360 EN ISO 21365:2020 CEN/TC 444 (ISO 21365:2019) Footwear protecting against chemicals - Part 1: Terminology and test 63 MMPS 227 EN 13832-1:2018 CEN/TC 161 methods Determination of material resistance to permeation by chemicals - Part 64 MMPS 227 EN 16523-2:2015+A1:2018 2: Permeation by potentially hazardous gaseous chemicals under condi- CEN/TC 162 tions of continuous contact Household and similar electrical appliances - Safety - Part 2-95: Par- 65 MMPS 239 EN 60335-2-95:2015/A2:2019 ticular requirements for drives for vertically moving garage doors for CLC/TC 61 residential use 66 MMPS 332 EN ISO 26000:2020 Guidance on social responsibility (ISO 26000:2010) CEN/SS S29 Medical electrical equipment - Part 2-72: Particular requirements for 67 MS 377 EN ISO 80601-2-72:2015 basic safety and essential performance of home healthcare environment CEN/TC 215 ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) Intelligent Transport Systems - eSafety - ProForma eCall Agreement 68 MTI 345 CEN/TS 17148:2018 CEN/TC 278 between TPSP and PARES Railway applications - Functional Interface Specification - Pantograph 69 UE 4 CLC/TR 50624:2014 CLC/TC 9X System Railway Application - Fixed Installations - Specification for reversible d.c. 70 UE 4 CLC/TR 50646:2015 CLC/TC 9X substations Railway applications - Signalling and control systems for non UGTMS 71 UE 4 EN 50668:2019 CLC/TC 9X Urban Rail systems Industrial communication networks - specifications - Part 5-21: 72 UE 23 EN 61158-5-21:2012 CLC/TC 65X Application layer service definition - Type 21 elements Electromagnetic compatibility (EMC) - Part 4-15: Testing and measure- 73 UE 30 EN 61000-4-15:2011 CLC/TC 210 ment techniques - Flickermeter - Functional and design specifications Electromagnetic compatibility (EMC) - Part 4-11: Testing and mea- surement techniques - Voltage dips, short interruptions and voltage 74 UE 30 EN IEC 61000-4-11:2020 CLC/TC 210 variations immunity tests for equipment with input current up to 16 A per phase 75 UE 42 EN 10283:2019 Corrosion resistant steel castings CEN/TC 459/SC 11 Steel for the reinforcement and prestressing of concrete - Test methods - 76 UE 42 EN ISO 15630-1:2019 CEN/TC 459/SC 4 Part 1: Reinforcing bars, rods and wire (ISO 15630-1:2019) Steel for the reinforcement and prestressing of concrete - Test methods - 77 UE 42 EN ISO 15630-2:2019 CEN/TC 459/SC 4 Part 2: Welded fabric and lattice girders (ISO 15630-2:2019) Steel for the reinforcement and prestressing of concrete - Test methods - 78 UE 42 EN ISO 15630-3:2019 CEN/TC 459/SC 4 Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10) 79 UE 89 EN ISO 8659:2020 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020) CEN/TC 69 Animal feeding stuffs: Methods of sampling and analysis - Determination 80 UE 95 EN 15742:2020 CEN/TC 327 of OCPs by GC-ECD Animal feeding stuffs - Determination of maduramicin-ammonium by 81 UE 95 EN 15781:2009 CEN/TC 327 reversed-phase HPLC using post-column derivatisation Animal feeding stuffs - Determination of nicarbazin - High-performance 82 UE 95 EN 15782:2009 CEN/TC 327 liquid chromatographic method Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit 83 UE 95 EN 16852:2017 CEN/TC 275 marc spirits and other spirit drinks - GC-MS method Foodstuffs - Determination of benzene in soft drinks, other beverages 84 UE 95 EN 16857:2017 and vegetable-based infant foods by headspace gas chromatography CEN/TC 275 mass spectrometry (HS-GC-MS) Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs 85 UE 95 EN 16858:2017 CEN/TC 275 by liquid chromatography and tandem mass spectrometry (LC-MS/MS) Animal feeding stuffs: Methods of sampling and analysis - Determination 86 UE 95 EN 16877:2016 of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials CEN/TC 327 and compound feed by LC-MS Foodstuffs - Determination of zearalenone in edible vegetable oils by 87 UE 95 EN 16924:2017 CEN/TC 275 LC-FLD or LC-MS/MS Animal feeding stuffs: Methods of sampling and analysis - Determination 88 UE 95 EN 16930:2017 CEN/TC 327 of carbadox and olaquindox by HPLC/UV Animal feeding stuffs: Methods of sampling and analysis - Detection of 89 UE 95 EN 16939:2017 tylosin, spiramycin and virginiamycin - Thin Layer Chromatography and CEN/TC 327 bioautography Animal feeding stuffs: Methods of sampling and analysis - Identification 90 UE 95 EN 17049:2018 of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-ad- CEN/TC 327 ditive levels in compound feed - Confirmatory analysis by LC-MS Animal feeding stuffs: Methods of sampling and analysis - Determination 91 UE 95 EN 17050:2017 CEN/TC 327 of iodine in animal feed by ICP-MS

5 Animal feeding stuffs: Methods of sampling and analysis - Determination 92 UE 95 EN 17053:2018 of trace elements, heavy metals and other elements in feed by ICP-MS CEN/TC 327 (multi-method) Foodstuffs - Determination of acrylamide in food and coffee by gas chro- 93 UE 95 CEN/TS 17083:2017 CEN/TC 275 matography-mass spectrometry (GC-MS) Animal feeding stuffs: Methods of sampling and analysis - Performance 94 UE 95 CEN/TS 17174:2018 criteria for single laboratory validated and ring-trial validated methods of CEN/TC 327 analysis for the determination of heavy metals Animal feeding stuffs: Methods of sampling and analysis - Determination of Deoxynivalenol, Aflatoxin B1, Fumonisin B1 & B2, T-2 & HT-2 toxins, 95 UE 95 EN 17194:2019 CEN/TC 327 Zearalenone and Ochratoxin A in feed materials and compound feed by LC-MS/MS Determination of citrinin in food by liquid chromatography tandem mass 96 UE 95 EN 17203:2018 CEN/TC 275 spectrometry (LC-MS/MS) Animal Feeding stuffs - Methods of sampling and analysis - Determina- 97 UE 95 EN 17212:2019 tion of melamine and cyanuric acid content by liquid chromatographic CEN/TC 327 method with mass spectrometric detection (LC-MS/MS) Foodstuffs - Determination of ochratoxin A in spices, liquorice, cocoa and 98 UE 95 EN 17250:2020 CEN/TC 275 cocoa products by IAC clean-up and HPLC-FLD Foodstuffs - Determination of ochratoxin A in pork meat and derived 99 UE 95 EN 17251:2020 CEN/TC 275 products by IAC clean-up and HPLC-FLD Foodstuffs - Determination of phomopsin A in lupin seeds and lupin 100 UE 95 EN 17252:2020 CEN/TC 275 derived products by HPLC-MS/MS Animal feeding stuffs - Methods of sampling and analysis - Determina- 101 UE 95 EN 17298:2019 tion of benzoic and sorbic acid by High Performance Liquid Chromatog- CEN/TC 327 raphy (HPLC) Animal feeding stuffs: Methods of sampling and analysis - Determination 102 UE 95 EN 17362:2020 of pentachlorophenol (PCP) in feed materials and compound feed by CEN/TC 327 LC-MS/MS Microbiology of the food chain - Detection and quantification of hista- 103 UE 95 EN ISO 19343:2017 CEN/TC 463 mine in fish and fishery products - HPLC method (ISO 19343:2017) Textiles - Quantitative chemical analysis - Part 1: General principles of 104 UE 103 EN ISO 1833-1:2020 CEN/TC 248 testing (ISO 1833-1:2020) Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixtures 105 UE 103 EN ISO 1833-2:2020 CEN/TC 248 (ISO 1833-2:2020) Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain 106 UE 103 EN ISO 1833-4:2017 protein fibres with certain other fibres (method using hypochlorite) (ISO CEN/TC 248 1833-4:2017) Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, 107 UE 103 EN ISO 1833-6:2019 certain types of cupro, modal or lyocell with certain other fibres (method CEN/TC 248 using formic acid and zinc chloride) (ISO 1833-6:2018) Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate 108 UE 103 EN ISO 1833-9:2019 CEN/TC 248 with certain other fibres (method using benzyl alcohol) (ISO 1833-9:2019) Fertilizers and liming materials - Sampling of static heaps - Technical 109 UE 105 CEN/TR 17040:2017 CEN/TC 260 report on experimental sampling trials performed under mandate M/454 Water meters for cold potable water and hot water - Part 3: Test report 110 UE 109 EN ISO 4064-3:2014 CEN/TC 92 format (ISO 4064-3:2014) Water meters for cold potable water and hot water - Part 4: Non-metro- 111 UE 109 EN ISO 4064-4:2014 CEN/TC 92 logical requirements not covered in ISO 4064-1 (ISO 4064-4:2014) Cement - Part 2: Assessment and verification of constancy of perfor- 112 UE 111 EN 197-2:2020 CEN/TC 51 mance Flexible sheets for waterproofing - Waterproofing of concrete bridge 113 UE 113 EN 14691:2017 decks and other concrete surfaces trafficable by vehicles - Compatibility CEN/TC 254 by heat conditioning Flexible sheets for waterproofing - Waterproofing of concrete bridge 114 UE 113 EN 14692:2017 decks and other concrete surfaces trafficable by vehicles - Determination CEN/TC 254 of the resistance to compaction of an asphalt layer Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination 115 UE 113 EN 14693:2017 CEN/TC 254 of the behaviour of waterproofing sheets during application of mastic asphalt Flexible sheets for waterproofing - Waterproofing of concrete bridge 116 UE 113 EN 14694:2017 decks and other concrete surfaces trafficable by vehicles - Determination CEN/TC 254 of resistance to dynamic water pressure after damage by pre-treatment Flooring of lignified materials other than wood - Characteristics, assess- 117 UE 118 EN 17009:2019 CEN/TC 175 ment and verification of constancy of performance and marking Glass in building - Determination of thermal transmittance (U value) - 118 UE 122 EN 673:2011 CEN/TC 129 Calculation method Glass in building - Determination of thermal transmittance (U value) - 119 UE 122 EN 674:2011 CEN/TC 129 Guarded hot plate method

6 Glass in building - Determination of thermal transmittance (U value) - 120 UE 122 EN 675:2011 CEN/TC 129 Heat flow meter method Glass in Building - Insulating glass units - Part 1: Generalities, system 121 UE 122 EN 1279-1:2018 CEN/TC 129 description, rules for substitution, tolerances and visual quality Glass in building - Insulating glass units - Part 2: Long term test method 122 UE 122 EN 1279-2:2018 CEN/TC 129 and requirements for moisture penetration Glass in Building - Insulating Glass Units - Part 4: Methods of test for the 123 UE 122 EN 1279-4:2018 CEN/TC 129 physical attributes of edge seal components and inserts Glass in building - Insulating glass units - Part 6: Factory production 124 UE 122 EN 1279-6:2018 CEN/TC 129 control and periodic tests Glass in building - Heat soaked thermally toughened soda lime silicate 125 UE 122 EN 14179-1:2016 CEN/TC 129 safety glass - Part 1: Definition and description Telecontrol equipment and systems - Part 5-101: Transmission protocols - 126 UE 140 EN 60870-5-101:2003/A1:2016 CLC/TC 57 Companion standard for basic telecontrol tasks Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: 127 UE 164 EN 62056-1-0:2015 CLC/TC 13 Smart metering standardization framework 128 UE 171 EN 1982:2017 Copper and copper alloys - Ingots and castings CEN/TC 133 Zinc or zinc alloy coated non-alloy steel wire for armouring either power 129 UE 184 EN 10257-1:2011 CEN/TC 459/SC 6 cables or telecommunication cables - Part 1: Land cables Zinc or zinc alloy coated non-alloy steel wire for armouring either power 130 UE 184 EN 10257-2:2011 CEN/TC 459/SC 6 cables or telecommunication cables - Part 2: Submarine cables Non-alloy steel wire rod for conversion to wire - Part 3: Specific require- 131 UE 184 EN ISO 16120-3:2011 ments for rimmed and rimmed substitute, low-carbon steel wire rod (ISO CEN/TC 459/SC 6 16120-3:2011) Bitumen and bituminous binders - Determination of breaking behaviour 132 UE 187 EN 13075-2:2016 - Part 2: Determination of fines mixing time of cationic bituminous CEN/TC 336 emulsions Information technology - Data centre facilities and infrastructures - Part 133 UE 207 EN 50600-1:2019 CLC/TC 215 1: General concepts Information technology - Data centre facilities and infrastructures - Part 134 UE 207 EN 50600-2-2:2019 CLC/TC 215 2-2: Power supply and distribution Information technology - Data centre facilities and infrastructures - Part 135 UE 207 EN 50600-2-3:2019 CLC/TC 215 2-3: Environmental control Reaction to fire tests for products - Non-combustibility test (ISO 136 UE 217 EN ISO 1182:2020 CEN/TC 127 1182:2020) 137 UE 217 EN 1364-1:2015 Fire resistance tests for non-loadbearing elements - Part 1: Walls CEN/TC 127 Fire resistance tests for non-loadbearing elements - Part 4: Curtain 138 UE 217 EN 1364-4:2014 CEN/TC 127 walling - Part configuration 139 UE 217 EN 1366-2:2015 Fire resistance tests for service installations - Part 2: Fire dampers CEN/TC 127 Reaction to fire tests - Ignitability of products subjected to direct im- 140 UE 217 EN ISO 11925-2:2020 CEN/TC 127 pingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020) Reaction to fire tests for building products - Building products excluding 141 UE 217 EN 13823:2020 CEN/TC 127 floorings exposed to the thermal attack by a single burning item Reaction to fire tests for building products - Determination of a building 142 UE 217 EN 16733:2016 CEN/TC 127 product's propensity to undergo continuous smouldering 143 UE 227 EN 341:2011 Personal fall protection equipment - Descender devices for rescue CEN/TC 160 Optics and photonics - Lasers and laser-related equipment - Vocabulary 144 UE 230 EN ISO 11145:2018 CEN/TC 123 and symbols (ISO 11145:2018) Ophthalmic instruments - Fundamental requirements and test methods - 145 UE 230 EN ISO 15004-2:2007 CEN/TC 170 Part 2: Light hazard protection (ISO 15004-2:2007) 146 UE 231 EN 14894:2013 LPG equipment and accessories - Cylinder and drum marking CEN/TC 286 Transportable gas cylinders - Inspection and maintenance of cylinder 147 UE 231 EN ISO 22434:2011 CEN/TC 23 valves (ISO 22434:2006) Automatic electrical controls - Part 2-11: Particular requirements for 148 UE 238 EN IEC 60730-2-11:2020 CLC/TC 72 energy regulators Automatic electrical controls - Part 2-7: Particular requirements for 149 UE 238 EN IEC 60730-2-7:2020 CLC/TC 72 timers and time switches Automatic electrical controls for household and similar use - Part 2-8: 150 UE 238 EN IEC 60730-2-8:2020 Particular requirements for electrically operated water valves, including CLC/TC 72 mechanical requirements Automatic electrical controls - Part 2-9: Particular requirements for 151 UE 238 EN IEC 60730-2-9:2019/A2:2020 CLC/TC 72 temperature sensing controls Packaging - Flexible aluminium tubes - Wall thickness determination 152 UE 270 EN 12375:2009 CEN/TC 261 method 153 UE 270 EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances CEN/TC 261 Packaging - Material recovery - Criteria for a minimum content of recy- 154 UE 270 CR 13504:2000 CEN/TC 261 cled material

7 Packaging - Transport packaging for dangerous goods - Test methods 155 UE 270 EN ISO 16495:2013 CEN/TC 261 (ISO 16495:2013) Information technology - Notification of RFID - The information sign and 156 UE 300 EN 16570:2014 additional information to be provided by operators of RFID application CEN/TC 225 systems 157 UE 300 CEN/TR 16669:2014 Information technology - Device interface to support ISO/IEC 18000-3 CEN/TC 225 Information technology - Authorization of mobile phones when used as 158 UE 300 CEN/TR 16671:2014 CEN/TC 225 RFID interrogators Information technology - Privacy capability features of current RFID 159 UE 300 CEN/TR 16672:2014 CEN/TC 225 technologies Information technology - Notification of RFID - Additional information to 160 UE 300 CEN/TR 16684:2014 CEN/TC 225 be provided by operators Information technology - Notification of RFID - The information sign to 161 UE 300 CEN/TS 16685:2014 CEN/TC 225 be displayed in areas where RFID interrogators are deployed 162 UE 302 CLC/TR 45550:2020 Definitions related to material efficiency CEN/CLC/JTC 10 General method for the assessment of the ability to remanufacture 163 UE 302 EN 45553:2020 CEN/CLC/JTC 10 energy-related products Health informatics - Patient healthcard data - Part 1: General structure 164 UE 319 EN ISO 21549-1:2013 CEN/TC 251 (ISO 21549-1:2013) Health informatics - Patient healthcard data - Part 2: Common objects 165 UE 319 EN ISO 21549-2:2014 CEN/TC 251 (ISO 21549-2:2014) Health informatics - Patient healthcard data -- Part 3: Limited clinical 166 UE 319 EN ISO 21549-3:2014 CEN/TC 251 data (ISO 21549-3:2014) Health informatics - Patient healthcard data - Part 4: Extended clinical 167 UE 319 EN ISO 21549-4:2014 CEN/TC 251 data (ISO 21549-4:2014) Admixtures for concrete, mortar and grout - Part 6: Sampling, assess- 168 UE 321 EN 934-6:2019 CEN/TC 104 ment and verification of the constancy of performance 169 UE 321 EN 13369:2018 Common rules for precast concrete products CEN/TC 229 Sustainability of construction works - Sustainability assessment of 170 UE 335 EN 15643-5:2017 buildings and civil engineering works - Part 5: Framework on specific CEN/TC 350 principles and requirement for civil engineering works Sustainability of construction works - Environmental product declarations 171 UE 335 CEN/TR 15941:2010 CEN/TC 350 - Methodology for selection and use of generic data Sustainability of construction works - Guidance for the implementation 172 UE 335 CEN/TR 16970:2016 CEN/TC 350 of EN 15804 Intelligent transport systems - Cooperative systems - Globally unique 173 UE 345 EN ISO 17419:2018 CEN/TC 278 identification (ISO 17419:2018) Geotextiles and geotextile-related products - Determination of water flow 174 UE 364 EN ISO 12958-1:2020 CEN/TC 189 capacity in their plane - Part 1: Index test (ISO 12958-1:2020) Geotextiles and geotextile-related products - Determination of water flow 175 UE 364 EN ISO 12958-2:2020 CEN/TC 189 capacity in their plane - Part 2: Performance test (ISO 12958-2:2020) 176 UE 373 CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points CEN/TC 331 177 UE 373 CEN/TR 16894:2015 Postal services - Quality of delivery: Reforwarding CEN/TC 331 Provision of services - Part 3: Management of Performance Measure- 178 UE 373 EN 17371-3:2020 ment - Guidance on the mechanism to measure performance as part of CEN/TC 447 service contracts 179 UE 384 EN 16352:2013 Logistics - Specifications for reporting crime incidents CEN/TC 379

8 SECȚIUNEA 1 CAPITOLUL 2

Standarde europene propuse a se adopta ca standarde române prin publicarea notei de confirmare

Nota: Unele standarde europene din listă sunt încă în stadiu de proiect

Nr crt Minister CT Indicativ EN Titlu TC

Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other 1 MADR 95 FprEN ISO 6888-1 CEN/TC 463 species) - Part 1: Mehod using Baird-Parker agar medium (ISO/FDIS 6888- 1:2021) Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other spe- 2 MADR 95 FprEN ISO 6888-2 CEN/TC 463 cies) - Part 2: Method using rabbit plasma fibrinogen agar medium (ISO/ FDIS 6888-2:2021) Food analysis - Determination of pesticide residues by LC-MS/MS - Tandem 3 MADR 95 CEN/TR 15641:2007 CEN/TC 275 mass spectrometric parameters Microbiology of the food chain - Method validation - Part 3: Protocol for the 4 MADR 95 EN ISO 16140-3:2021 verification of reference methods and validated alternative methods in a CEN/TC 463 single laboratory (ISO 16140-3:2021) Foodstuffs - Guidelines for the calibration and quantitative determination 5 MADR 95 CEN/TS 17061:2019 of pesticide residues and organic contaminants using chromatographic CEN/TC 275 methods Foods of plant origin - Multimethod for the determination of pesticide residues using GC- or LC-based analysis following acetonitrile extraction/ 6 MADR 95 CEN/TR 17063:2017 CEN/TC 275 partitioning and cleanup by dispersive SPE - Validation data of the modular QuEChERS-method 7 MADR 95 FprEN 17203 Foodstuffs - Determination of citrinin in food by HPLC-MS/MS CEN/TC 275 Foodstuffs - Determination of aflatoxins in spices other than paprika by 8 MADR 95 EN 17424:2020 CEN/TC 275 IAC clean-up and HPLC-FLD with post-column derivatization Foodstuffs - Determination of ergot alkaloids in cereals and cereal prod- 9 MADR 95 EN 17425:2020 CEN/TC 275 ucts by dSPE clean-up and HPLC-MS/MS Doping prevention in sport - Good development and manufacturing prac- 10 MADR 95 EN 17444:2021 tices aimed at preventing the presence of prohibited substances in food CEN/TC 453 intended for sportspeople and food supplements Animal feeding stuffs: Methods of sampling and analysis - Determination 11 MADR 95 EN 17462:2021 CEN/TC 327 of the radionuclides Iodine-131, Caesium-134 and Caesium-137 in feed Milk - Quantitative determination of microbiological quality - Guidance for 12 MADR 95 FprEN ISO 21187 establishing and verifying a conversion relationship between results of an CEN/TC 302 alternative method and anchor method results (ISO/FDIS 21187:2020) Milk and milk products - Determination of the sugar contents - High 13 MADR 95 EN ISO 22184:2021 performance anion exchange chromatography with pulsed amperometric CEN/TC 302 detection method (HPAEC-PAD) (ISO 22184:2021) Infant formula and adult nutritionals - Determination of fructans - High 14 MADR 95 EN ISO 22579:2021 performance anion exchange chromatography with pulsed amperometric CEN/TC 302 detection (HPAEC-PAD) after enzymatic treatment (ISO 22579:2020) Microbiology of the food chain - Methods for the detection of Anisakidae 15 MADR 95 FprEN ISO 23036-1 L3 larvae in fish and fishery products - Part 1: UV-press method (ISO/FDIS CEN/TC 463 23036-1:2020) Microbiology of the food chain - Methods for the detection of Anisakidae 16 MADR 95 FprEN ISO 23036-2 L3 larvae in fish and fishery products - Part 2: Artificial digestion method CEN/TC 463 (ISO/FDIS 23036-2:2019) 17 MADR 180 FprEN ISO 4120 Sensory analysis - Methodology - Triangle test (ISO/FDIS 4120:2020) CEN/SS C01 Maize - Determination of moisture content (on milled grains and on whole 18 MADR 180 FprEN ISO 6540 CEN/TC 338 grains) (ISO/FDIS 6540:2020) Rice - Determination of biometric characteristics of kernels (ISO/FDIS 19 MADR 180 FprEN ISO 11746 CEN/TC 338 11746:2019) Fat and oil derivates - Fatty acid methyl ester (FAME) - Determination of 20 MADR 180 EN 14104:2021 CEN/TC 307 acid value Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of 21 MADR 180 EN 14105:2020 CEN/TC 307 free and total glycerol and mono-, di-, triglyceride contents 9 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of 22 MADR 180 EN 14112:2020 CEN/TC 307 oxidation stability (accelerated oxidation test) 23 MAI 216 FprEN 54-1 Fire detection and fire alarm systems - Part 1: Introduction CEN/TC 72 24 MAI 216 EN 12101-1:2020 Smoke and heat control systems - Part 1: Specification for smoke barriers CEN/TC 191 Fire-fighting hoses - Rubber and plastics suction hoses and hose assem- 25 MAI 216 FprEN ISO 14557 CEN/TC 192 blies (ISO/FDIS 14557:2021) Fixed firefighting systems - Water mist systems - Part 1: Design, installa- 26 MAI 216 EN 14972-1:2020 CEN/TC 191 tion, inspection and maintenance Fixed firefighting systems - Water mist systems - Part 3: Test protocol for 27 MAI 216 EN 14972-3:2021 CEN/TC 191 office, school classrooms and hotel for automatic nozzle systems Fixed firefighting systems - Water mist components - Part 1: Product char- 28 MAI 216 EN 17450-1:2021 CEN/TC 191 acteristics and test methods for strainer and filter components 29 MAI 217 EN 1366-4:2021 Fire resistance tests for service installations - Part 4: Linear joint seals CEN/TC 127 Fire resistance tests for service installations - Part 5: Service ducts and 30 MAI 217 EN 1366-5:2021 CEN/TC 127 shafts Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire 31 MAI 217 FprEN 17020-4 CEN/TC 127 resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows 32 MAI 376 FprEN ISO 22300 Security and resilience - Vocabulary (ISO/FDIS 22300:2020) CEN/TC 391 Conservation of cultural heritage - Procedure for the analytical evaluation 33 MC 380 FprEN 17488 to select cleaning methods for porous inorganic materials used in cultural CEN/TC 346 heritage Environmental Engineering (EE); Environmental conditions and environ- 34 MCID 6 EN 300 019-2-3 V2.5.1:2020 mental tests for telecommunications equipment; Part 2-3: Specification of EE 1 environmental tests; Stationary use at weatherprotected locations ElectroMagnetic Compatibility (EMC) standard for radio equipment and 35 MCID 6 EN 301 489-4 V3.3.1:2021 services; Part 4: Specific conditions for fixed radio links and ancillary ERM WGEMC equipment; Harmonised Standard for ElectroMagnetic Compatibility Radiotelephone transmitters and receivers for the maritime mobile 36 MCID 6 EN 301 925 V1.6.1:2020 service operating in VHF bands; Technical characteristics and methods of ERM TGMARINE measurement 37 MCID 6 EN 302 099 V2.2.1:2021 Environmental Engineering (EE); Powering of equipment in access network EE 2 Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels 38 MCID 6 EN 303 204 V3.1.1:2021 ERM TG28 ranging up to 500 mW e.r.p.; Harmonised Standard for access to the radio spectrum Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installa- 39 MCID 6 EN 303 276 V1.2.1:2021 ERM TGMARINE tions engaged in coordinated activities; Harmonised Standard for access to radio spectrum Primary Surveillance Radar (PSR); Harmonised Standard for access to 40 MCID 6 EN 303 364-2 V1.1.1:2021 radio spectrum; Part 2: Air Traffic Control (ATC) PSR sensors operating in ERM TGAERO the frequency band 2 700 MHz to 3 100 MHz (S band) Short Range Devices (SRD) and Ultra Wide Band (UWB); Part 1: Measure- 41 MCID 6 EN 303 883-1 V1.2.1:2021 ERM TGUWB ment techniques for transmitter requirements Short Range Devices (SRD) and Ultra Wide Band (UWB); Part 2: Measure- 42 MCID 6 EN 303 883-2 V1.2.1:2021 ERM TGUWB ment techniques for receiver requirements Optical fibre cables - Part 1-2: Generic specification - Basic optical cable 43 MCID 138 EN IEC 60794-1-2:2021 CLC/TC 86A test procedures - General guidance Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for 44 MCID 138 EN IEC 60794-2-11:2019/A1:2021 CLC/TC 86A simplex and duplex cables for use in premises cabling Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for 45 MCID 138 EN IEC 60794-2-21:2019/A1:2021 CLC/TC 86A multi-fibre optical distribution cables for use in premises cabling Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for 46 MCID 138 EN IEC 60794-2-31:2019/A1:2021 CLC/TC 86A optical fibre ribbon cables for use in premises cabling Optical fibre cables - Part 6-10: Indoor-outdoor cables - Family specifica- 47 MCID 138 EN IEC 60794-6-10:2020 CLC/TC 86A tion for universal indoor-outdoor cables Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specifica- 48 MCID 138 EN IEC 60794-6-20:2020 CLC/TC 86A tion for flame retardant outdoor cables Optical fibre cables - Part 6-30: Indoor-outdoor cables - Family specifica- 49 MCID 138 EN IEC 60794-6-30:2020 CLC/TC 86A tion for weatherised indoor cables Optical fibre cables - Part 4-30: Aerial optical cables along electrical power 50 MCID 138 FprEN IEC 60794-4-30:2021 lines - Family specification for optical phase conductor (OPPC) optical CLC/TC 86A cables Optical fibre cables - Part 1-211: Generic specification - Basic optical cable 51 MCID 138 FprEN IEC 60794-1-211:2020 test procedures - Environmental test methods - Sheath shrinkage, method CLC/TC 86A F11

10 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for 52 MCID 138 FprEN IEC 60794-3-70:2021 CLC/TC 86A outdoor optical fibre cables for rapid/multiple deployment Fibre optic communication subsystem test procedures - Part 2-8: Digital 53 MCID 138 FprEN IEC 61280-2-8:2020 CLC/SR 86C systems - Determination of low BER using Q-factor measurements Fibre optic interconnecting devices and passive components - Basic test 54 MCID 138 EN IEC 61300-3-30:2021 and measurement procedures - Part 3-30: Examinations and measure- CLC/TC 86BXA ments - Endface geometry of rectangular ferrule Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measure- 55 MCID 138 EN IEC 61300-3-53:2021 CLC/TC 86BXA ments - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) Fibre optic interconnecting devices and passive components - Basic test 56 MCID 138 FprEN IEC 61300-2-10:2020 CLC/TC 86BXA and measurement procedures - Part 2-10: Tests - Crush and load resistance Fibre optic interconnecting devices and passive components - Performance 57 MCID 138 FprEN IEC 61753-111-8:2021 CLC/TC 86BXA standard - Part 111-8: Sealed closures for Category G - Ground Fibre optic active components and devices - Package and interface stan- 58 MCID 138 FprEN IEC 62148-15:2021 CLC/SR 86C dards - Part 15: Discrete vertical cavity surface emitting laser packages Open data communication in building automation, controls and building 59 MCID 207 EN 13321-1:2021 management - Home and building electronic system - Part 1: Product and CEN/TC 247 system requirements Information technology - Data centre facilities and infrastructures - Part 60 MCID 207 EN 50600-2-1:2021 CLC/TC 215 2-1: Building construction Information technology - Data centre facilities and infrastructures - Part 61 MCID 207 FprEN 50600-2-5 CLC/TC 215 2-5: Security systems Energy performance of buildings - Building management system - Part 1: 62 MCID 207 EN ISO 52127-1:2021 CEN/TC 247 Module M10-12 (ISO 52127-1: 2021) Information technology - Security techniques - Code of practice for infor- 63 MCID 208 EN ISO/IEC 27017:2021 mation security controls based on ISO/IEC 27002 for cloud services (ISO/ CEN/CLC/JTC 13 IEC 27017:2015) CYBER; Cyber Security for Consumer Internet of Things: Baseline Require- 64 MCID 208 EN 303 645 V2.1.1:2020 CYBER ments Integrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS1) 65 MCID 268 EN 300 138-2 V1.3.4:1998 SPS 5 protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification Integrated Services Digital Network (ISDN); Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS1) 66 MCID 268 EN 300 138-3 V1.3.4:1998 SPS 5 protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specifi- cation for the user Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Close User Group (CUG) supplementary 67 MCID 268 EN 300 138-5 V3.1.1:2002 SPAN 13 service; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specifica- tion for the network Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Closed User Group (CUG) supplementary 68 MCID 268 EN 300 138-6 V1.5.1:2002 service; Part 6: Abstract Test Suite (ATS) and partial Protocol Implemen- SPAN 13 tation eXtra Information for Testing (PIXIT) proforma specification for the network Satellite Earth Stations and Systems (SES); Fixed earth stations communi- 69 MCID 269 EN 303 699 V1.1.1:2021 cating with non-geostationary satellite systems in the 20 GHz and 30 GHz SES HARM FSS bands; Harmonised Standard for access to radio spectrum Health Informatics - Automatic identification and data capture marking 70 MCID 319 EN ISO 18530:2021 and labelling - Subject of care and individual provider identification (ISO CEN/TC 251 18530:2021) Geographic information - Metadata - Part 1: Fundamentals - Amendment 2 71 MCID 359 EN ISO 19115-1:2014/A2:2020 CEN/TC 287 (ISO 19115-1:2014/Amd 2:2020) Geographic information - Feature concept dictionaries and registers (ISO/ 72 MCID 359 FprEN ISO 19126 CEN/TC 287 FDIS 19126:2021) Geographic information - Procedures for item registration - Part 1: Funda- 73 MCID 359 EN ISO 19135-1:2015/prA1 CEN/TC 287 mentals - Amendment 1 (ISO 19135-1:2015/DAM 1:2020) Sound system equipment - Part 16: Objective rating of speech intelligibility 74 MCID 375 EN IEC 60268-16:2020 CLC/TC 100X by speech transmission index Sound system equipment - Part 22: Electrical and mechanical measure- 75 MCID 375 EN IEC 60268-22:2020 CLC/TC 100X ments on transducers Spatial wireless power transfer based on multiple magnetic resonances - 76 MCID 375 FprEN IEC 63245-1:2020 CLC/TC 100X Part 1: Requirements Photocatalysis - Continuous flow test methods - Part 1: Determination of 77 MCID 378 FprEN 16980-1 CEN/TC 386 the degradation of nitric oxide (NO) in the air by photocatalytic materials 78 MCID 383 EN ISO 56000:2021 Innovation management - Fundamentals and vocabulary (ISO 56000:2020) CEN/TC 389 Innovation management - Innovation management system - Guidance (ISO 79 MCID 383 EN ISO 56002:2021 CEN/TC 389 56002:2019)

11 Innovation management - Tools and methods for innovation partnership - 80 MCID 383 EN ISO 56003:2021 CEN/TC 389 Guidance (ISO 56003:2019) Cement - Part 5: Portland-composite cement CEM II/C-M and Composite 81 MDLPA 111 EN 197-5:2021 CEN/TC 51 cement CEM VI 82 MDLPA 111 EN 459-2:2021 Building lime - Part 2: Test methods CEN/TC 51 Thermal insulation products for building applications - Determination of 83 MDLPA 113 EN 13497:2018+A1:2021 the resistance to impact of external thermal insulation composite systems CEN/TC 88 (ETICS) Flexible sheets for waterproofing - Reinforced bitumen sheets for roof 84 MDLPA 113 FprEN 13707 CEN/TC 254 waterproofing - Definitions and characteristics Double skin metal faced insulating panels - Factory made products - Spec- 85 MDLPA 113 FprEN 14509-2 ifications - Part 2: Structural applications - Fixings and potential uses of CEN/TC 128 stabilization of individual structural elements Self-supporting metal sheet for roofing, external cladding and internal 86 MDLPA 113 FprEN 14782 CEN/TC 128 lining - Product specification and requirements Thermal insulation products for buildings - Factory made calcium silicate 87 MDLPA 113 EN 16977:2020 CEN/TC 88 (CS) products - Specification Flexible sheets for waterproofing - Plastic and rubber sheets for water- 88 MDLPA 113 FprEN 17048 proofing of concrete bridge decks and other trafficked areas of concrete CEN/TC 254 - Definitions and characteristics Thermal insulation products for building - Factory made vegetal fibres 89 MDLPA 113 FprEN 17139 CEN/TC 88 based products (VFBP) Natural stone test methods - Determination of sensitivity to accidental 90 MDLPA 115 EN 16301:2021 CEN/TC 246 staining Glass in building - Thermally toughened soda lime silicate safety glass - 91 MDLPA 122 FprEN 12150-2 CEN/TC 129 Part 2: Product standard Glass in building - Thermally toughened borosilicate safety glass - Part 1: 92 MDLPA 122 FprEN 13024-1:2019 CEN/TC 129 Definition and description Glass in building - Thermally toughened borosilicate safety glass - Part 2: 93 MDLPA 122 FprEN 13024-2 CEN/TC 129 Product standard Glass in building - Heat soaked thermally toughened soda lime silicate 94 MDLPA 122 FprEN 14179-2 CEN/TC 129 safety glass - Part 2: Product standard 95 MDLPA 122 FprEN 16477-2 Painted glass for internal use - part 2: product standard CEN/TC 129 Glass in building - Assessment of release of dangerous substances - Deter- 96 MDLPA 122 EN 17416:2021 CEN/TC 129 mination of emissions into indoor air from glass products 97 MDLPA 136 EN 50110-2:2021 Operation of electrical installations - Part 2: National annexes CLC/BTTF 62-3 Low-voltage electrical installations - Part 5-53: Selection and erection of 98 MDLPA 136 HD 60364-5-53:2020 CLC/TC 64 electrical equipment - Switchgear and controlgear Low-voltage electrical installations - Part 5-54: Selection and erection of 99 MDLPA 136 HD 60364-5-54:2011/FprA1:2021 CLC/TC 64 electrical equipment - Earthing arrangements and protective conductors Low-voltage electrical installations - Part 7-710: Requirements for special 100 MDLPA 136 FprHD 60364-7-710:2021 CLC/TC 64 installations or locations - Medical locations Low voltage electrical installations - Part 7-710: Requirements for special 101 MDLPA 136 FprHD 60364-7-710:2021/FprAA CLC/TC 64 installations or locations - Medical locations Low-voltage electrical installations - Part 7-701: Requirements for special 102 MDLPA 136 FprHD 60364-7-701:2019 CLC/TC 64 installations or locations - Locations containing a bath or shower Drain and sewer systems outside buildings - Management and control of 103 MDLPA 186 EN 14654-1:2021 CEN/TC 165 activities - Part 1: General requirements Drain and sewer systems outside buildings - Management and control of 104 MDLPA 186 EN 14654-2:2021 CEN/TC 165 activities - Part 2: Rehabilitation Drain and sewer systems outside buildings - Management and control of 105 MDLPA 186 EN 14654-3:2021 CEN/TC 165 activities - Part 3: Drain and sewer cleaning Drain and sewer systems outside buildings - Management and control of 106 MDLPA 186 EN 14654-4:2021 CEN/TC 165 activities - Part 4: Control of inputs from users On-site non-potable water systems - Part 2: Systems for the use of treated 107 MDLPA 186 EN 16941-2:2021 CEN/TC 165 greywater Road marking materials - Retroreflecting road studs - Part 2: Road test 108 MDLPA 187 FprEN 1463-2 CEN/TC 226 performance specifications 109 MDLPA 187 EN 1824:2020 Road marking materials - Road trials CEN/TC 226 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in 110 MDLPA 187 EN 12697-42:2021 CEN/TC 227 reclaimed asphalt Bitumen and bituminous binders - Determination of adhesivity of bitumi- 111 MDLPA 187 EN 13614:2021 CEN/TC 336 nous emulsions by water immersion test 112 MDLPA 187 FprEN 14188-2 Joint fillers and sealants - Part 2: Specifications for cold applied sealants CEN/TC 227 113 MDLPA 240 EN 1837:2020 Safety of machinery - Integral lighting of machines CEN/TC 169 114 MDLPA 240 FprEN 12464-1 Light and lighting - Lighting of work places - Part 1: Indoor work places CEN/TC 169

12 Acoustics - Rating of sound insulation in buildings and of building elements 115 MDLPA 276 EN ISO 717-1:2020 CEN/TC 126 - Part 1: Airborne sound insulation (ISO 717-1:2020) Acoustics - Rating of sound insulation in buildings and of building elements 116 MDLPA 276 EN ISO 717-2:2020 CEN/TC 126 - Part 2: Impact sound insulation (ISO 717-2:2020) Acoustics - Laboratory measurement of sound insulation of building ele- 117 MDLPA 276 FprEN ISO 10140-5 ments - Part 5: Requirements for test facilities and equipment (ISO/FDIS CEN/TC 126 10140-5:2021) Acoustics - Laboratory measurement of sound insulation of building 118 MDLPA 276 FprEN ISO 10140-4 elements - Part 4: Measurement procedures and requirements (ISO/FDIS CEN/TC 126 10140-4:2021) Acoustics - Laboratory measurement of sound insulation of building 119 MDLPA 276 FprEN ISO 10140-4 elements - Part 4: Measurement procedures and requirements (ISO/FDIS CEN/TC 126 10140-4:2016) Acoustics - Laboratory measurement of sound insulation of building 120 MDLPA 276 FprEN ISO 10140-2 elements - Part 2: Measurement of airborne sound insulation (ISO/FDIS CEN/TC 126 10140-2:2021) Acoustics - Laboratory measurement of sound insulation of building 121 MDLPA 276 FprEN ISO 10140-3 elements - Part 3: Measurement of impact sound insulation (ISO/FDIS CEN/TC 126 10140-3:2021) Acoustics - Laboratory measurement of sound insulation of building 122 MDLPA 276 FprEN ISO 10140-1 elements - Part 1: Application rules for specific products (ISO/FDIS 10140- CEN/TC 126 1:2021) Acoustics - Determination and application of measurement uncertainties 123 MDLPA 276 EN ISO 12999-1:2020 CEN/TC 126 in building acoustics - Part 1: Sound insulation (ISO 12999-1:2020) 124 MDLPA 276 EN 16205:2020 Laboratory measurement of walking noise on floors CEN/TC 126 Water based surface embedded heating and cooling systems - Part 5: 125 MDLPA 302 FprEN 1264-5 Determination of the thermal output for wall and ceiling heating and for CEN/TC 130 floor, wall and ceiling cooling Water based surface embedded heating and cooling systems - Part 2: Floor 126 MDLPA 302 FprEN 1264-2 heating: Methods for the determination of the thermal output using calcu- CEN/TC 130 lations and experimental tests Water based surface embedded heating and cooling systems - Part 4: 127 MDLPA 302 FprEN 1264-4 CEN/TC 130 Installation Water based surface embedded heating and cooling systems - Part 1: 128 MDLPA 302 FprEN 1264-1 CEN/TC 130 Definitions and symbols Water based surface embedded heating and cooling systems - Part 3: 129 MDLPA 302 FprEN 1264-3 CEN/TC 130 Dimensioning 130 MDLPA 302 FprEN 12975 Solar collectors - General requirements CEN/TC 312 Thermal solar systems and components - Factory made systems - Part 1: 131 MDLPA 302 FprEN 12976-1:2018 CEN/TC 312 General requirements Ventilation for buildings - Performance testing of components/products for 132 MDLPA 302 EN 13141-7:2021 residential ventilation - Part 7: Performance testing of ducted mechanical CEN/TC 156 supply and exhaust ventilation units (including heat recovery) Ventilation for buildings - Performance testing of components/products for 133 MDLPA 302 EN 13141-4:2021 residential ventilation - Part 4: Aerodynamic, electrical power and acoustic CEN/TC 156 performance of unidirectional ventilation units Ventilation for buildings - Components/products for residential ventilation - 134 MDLPA 302 EN 13142:2021 CEN/TC 156 Required and optional performance characteristics Fans - Procedures and methods to determine the energy efficiency for the 135 MDLPA 302 FprEN 17166:2019 CEN/TC 156 electrical input power range of 125 W up to 500 kW Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 136 MDLPA 318 FprEN 1627 CEN/TC 33 glar resistance - Requirements and classification Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 137 MDLPA 318 FprEN 1628 glar resistance - Test method for the determination of resistance under CEN/TC 33 static loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 138 MDLPA 318 FprEN 1629 glar resistance - Test method for the determination of resistance under CEN/TC 33 dynamic loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - 139 MDLPA 318 FprEN 1630 Burglar resistance - Test method for the determination of resistance to CEN/TC 33 manual burglary attempts Industrial, commercial and garage doors and gates - Safety in use of power 140 MDLPA 318 EN 12453:2017+A1:2021 CEN/TC 33 operated doors - Requirements and test methods Industrial, commercial and garage doors and gates - Mechanical aspects - 141 MDLPA 318 EN 12604:2017+A1:2020 CEN/TC 33 Requirements and test methods Building hardware - Hardware for windows and door height windows - Re- 142 MDLPA 318 EN 13126-2:2021 CEN/TC 33 quirements and test methods - Part 2: Window fastener handles Building hardware - Hardware for windows and door height windows - Re- 143 MDLPA 318 EN 13126-7:2021 CEN/TC 33 quirements and test methods - Part 7: Finger catches

13 Blinds and shutters - Thermal and visual comfort - Test and calculation 144 MDLPA 318 EN 14500:2021 CEN/TC 33 methods Blinds and shutters - Thermal and visual comfort - Performance character- 145 MDLPA 318 EN 14501:2021 CEN/TC 33 istics and classification Building hardware - Mechatronic cylinders - Requirements and test meth- 146 MDLPA 318 EN 15684:2020 CEN/TC 33 ods Curtain walling - Determination of the strength of shear connections - Test 147 MDLPA 318 FprEN 16758 CEN/TC 33 method and requirements Power operated pedestrian swing door drives with self closing function - 148 MDLPA 318 EN 17372:2021 CEN/TC 33 Requirements and test methods 149 MDLPA 321 EN 206:2013+A2:2021 Concrete - Specification, performance, production and conformity CEN/TC 104 Testing hardened concrete - Part 18: Determination of the chloride migra- 150 MDLPA 321 EN 12390-18:2021 CEN/TC 104 tion coefficient 151 MDLPA 326 FprEN 14374 Timber structures - Laminated veneer lumber (LVL) - Requirements CEN/TC 124 152 MDLPA 326 EN 14592:2020 Timber structures - Dowel-type fasteners - Requirements CEN/TC 124 153 MDLPA 326 EN 16351:2021 Timber structures - Cross laminated timber - Requirements CEN/TC 124 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supple- 154 MDLPA 343 EN 1993-1-4:2006/A2:2020 CEN/TC 250 mentary rules for stainless steels 155 MDLPA 346 FprEN IEC 62305-1:2018 Protection against lightning - Part 1: General principles CLC/TC 81X Protection against lightning - Part 3: Physical damage to structures and life 156 MDLPA 346 FprEN IEC 62305-3:2018 CLC/TC 81X hazard Protection against lightning - Part 4: Electrical and electronic systems 157 MDLPA 346 FprEN IEC 62305-4:2018 CLC/TC 81X within structures 158 MDLPA 346 FprEN IEC 62305-2:2018 Protection against lightning - Part 2: Risk management CLC/TC 81X Geotechnical investigation and testing - Sampling of soil, rock and ground- 159 MDLPA 361 FprEN ISO 22475-1 CEN/TC 341 water - Part 1: Technical principles (ISO/FDIS 22475-1:2020) Geosynthetics - Determination of compression behaviour - Part 1: Compres- 160 MDLPA 364 FprEN ISO 25619-1 CEN/TC 189 sive creep properties (ISO/FDIS 25619-1:2020) Accessibility and usability of the built environment - Functional require- 161 MDLPA 365 EN 17210:2021 CEN/CLC/JTC 11 ments Facility management - Scope, key concepts and benefits (ISO/TR 162 MDLPA 365 CEN ISO/TR 41013:2021 CEN/TC 348 41013:2017) Rotating electrical machines - Part 18-41: Partial discharge free electrical EN 60034-18-41:2014/A1:2019/ 163 MEAT 1 insulation systems (Type I) used in electrical rotating machines fed from CLC/TC 2 AC:2020-12 voltage converters - Qualification and quality control tests 164 MEAT 1 FprEN 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance CLC/TC 2 Rotating electrical machines - Part 7: Classification of types of construc- 165 MEAT 1 FprEN IEC 60034-7:2020 CLC/TC 2 tion, mounting arrangements and terminal box position (IM Code) 166 MEAT 1 FprEN IEC 60034-11:2020 Rotating electrical machines - Part 11: Thermal protection CLC/TC 2 Rotating electrical machines - Test methods and apparatus for the mea- 167 MEAT 1 FprEN IEC 60773:2021 CLC/TC 2 surement of the operational characteristics of brushes Power transformers - Additional European requirements: Part 1-1: Common 168 MEAT 3 EN 50708-1-1:2020/AC:2020-12 CLC/TC 14 part - General requirements Power transformers - Additional European requirements: Part 2-1 Medium 169 MEAT 3 EN 50708-2-1:2020/AC:2020-12 CLC/TC 14 power transformer - General requirements Power transformers - Part 22-5: Power transformer and reactor fittings - 170 MEAT 3 EN IEC 60076-22-5:2021 CLC/TC 14 Electric pumps for transformers Power transformers - Part 22-6: Power transformer and reactor fittings - 171 MEAT 3 EN IEC 60076-22-6:2021 CLC/TC 14 Electric fans for transformers Method for the determination of the proof and the comparative tracking 172 MEAT 5 EN IEC 60112:2020 CLC/SR 112 indices of solid insulating materials Instruments and software used for measurement in high-voltage and 173 MEAT 8 EN IEC 61083-3:2021 high-current tests - Part 3: Requirements for hardware for tests with alter- CLC/SR 42 nating and direct voltages and currents Instruments and software used for measurements in high-voltage and 174 MEAT 8 FprEN IEC 61083-1:2020 CLC/SR 42 high-current tests - Part 1: Requirements for instruments for impulse tests 175 MEAT 8 FprEN IEC 61869-13:2020 Instrument transformers - Part 13: Stand-alone merging unit (SAMU) CLC/TC 38 High-voltage switchgear and controlgear - Part 106: Alternating current 176 MEAT 8 FprEN IEC 62271-106:2021 CLC/TC 17AC contactors, contactor-based controllers and motor-starters High-voltage switchgear and controlgear - Part 200: AC metal-enclosed 177 MEAT 8 FprEN IEC 62271-200:2021 switchgear and controlgear for rated voltages above 1 kV and up to and CLC/TC 17AC including 52 kV High-voltage switchgear and controlgear - Part 103: Switches for rated 178 MEAT 8 FprEN IEC 62271-103:2021 CLC/TC 17AC voltages above 1 kV up to and including 52 kV 179 MEAT 9 EN IEC 60947-1:2021 Low-voltage switchgear and controlgear - Part 1: General rules CLC/TC 121A

14 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, 180 MEAT 9 EN IEC 60947-3:2021 CLC/TC 121A switch-disconnectors and fuse-combination units Low-voltage switchgear and controlgear - Part 6-2: Multiple function equip- 181 MEAT 9 FprEN IEC 60947-6-2:2020 CLC/TC 121A ment - Control and protective switching devices (or equipment) (CPS) Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitiga- 182 MEAT 9 FprEN IEC 60947-9-2:2021 CLC/TC 121A tion systems - Optical-based internal arc-detection and mitigation devices Low-voltage switchgear and controlgear - Part 4-2: Contactors and mo- 183 MEAT 9 FprEN IEC 60947-4-2:2020 CLC/TC 121A tor-starters - Semiconductor motor controllers, starters and soft-starters Low-voltage switchgear and controlgear - Part 4-3: Contactors and mo- 184 MEAT 9 FprEN IEC 60947-4-3:2020 tor-starters - Semiconductor controllers and semiconductor contactors for CLC/TC 121A non-motor loads Low-voltage switchgear and controlgear - Part 6-1: Multiple function equip- 185 MEAT 9 FprEN IEC 60947-6-1:2020 CLC/TC 121A ment - Transfer switching equipment Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices 186 MEAT 9 EN IEC 60947-5-8:2021 CLC/TC 121A and switching elements - Three-position enabling switches 187 MEAT 9 FprEN IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules CLC/SR 121B Low-voltage switchgear and controlgear assemblies - Part 2: Power switch- 188 MEAT 9 FprEN IEC 61439-2:2020 CLC/SR 121B gear and controlgear assemblies 189 MEAT 11 EN 50696:2021 Contact Interface for Automated Connection Device CLC/TC 23H Appliance couplers for household and similar general purposes - Part 2-1: 190 MEAT 11 EN IEC 60320-2-1:2021 CLC/SR 23G Sewing machine couplers Appliance couplers for household and similar general purposes - Part 2-3: 191 MEAT 11 EN IEC 60320-2-3:2021 CLC/SR 23G Appliance couplers with a degree of protection higher than IPX0 Appliance couplers for household and similar general purposes - Part 2-4: 192 MEAT 11 EN IEC 60320-2-4:2021 CLC/SR 23G Couplers dependent on appliance weight for engagement Appliance couplers for household and similar general purposes - Part 1: 193 MEAT 11 EN 60320-1:2015/A1:2021 CLC/SR 23G General requirements Appliance couplers for household and similar general purposes - Part 3: 194 MEAT 11 EN 60320-3:2014/A1:2021 CLC/SR 23G Standard sheets and gauges Switches for household and similar fixed electrical installations - Part 2-1: 195 MEAT 11 FprEN IEC 60669-2-1:2020 CLC/TC 23BX Particular requirements - Electronic control devices Boxes and enclosures for electrical accessories for household and similar 196 MEAT 11 EN IEC 60670-1:2021 CLC/TC 23BX fixed electrical installations - Part 1: General requirements Boxes and enclosures for electrical accessories for household and similar 197 MEAT 11 EN IEC 60670-1:2021/A11:2021 CLC/TC 23BX fixed electrical installations - Part 1: General requirements 198 MEAT 11 EN IEC 60799:2021 Electrical accessories - Cord sets and interconnection cord sets CLC/SR 23G Switches for appliances - Part 2-1: Particular requirements for cord switch- 199 MEAT 11 EN IEC 61058-2-1:2021 CLC/SR 23J es Switches for appliances - Part 2-4: Particular requirements for inde- 200 MEAT 11 EN IEC 61058-2-4:2021 CLC/SR 23J pendently mounted switches Switches for appliances - Part 2-5: Particular requirements for change-over 201 MEAT 11 EN IEC 61058-2-5:2021 CLC/SR 23J selectors Conduit systems for cable management - Part 21: Particular requirements - 202 MEAT 11 FprEN IEC 61386-21:2021/FprAA CLC/TC 213 Rigid conduit systems Conduit systems for cable management - Part 23: Particular requirements - 203 MEAT 11 FprEN IEC 61386-23:2021 CLC/TC 213 Flexible conduit systems Conduit systems for cable management - Part 23: Particular requirements - 204 MEAT 11 FprEN IEC 61386-23:2021/FprAA CLC/TC 213 Flexible conduit systems Conduit Systems for cable management - Part 22: Particular requirements 205 MEAT 11 FprEN IEC 61386-22:2021/FprAA CLC/TC 213 - Pliable conduit systems Conduit systems for cable management - Part 21: Particular requirements - 206 MEAT 11 FprEN IEC 61386-21:2021 CLC/TC 213 Rigid conduit systems Conduit Systems for cable management - Part 22: Particular requirements 207 MEAT 11 FprEN IEC 61386-22:2021 CLC/TC 213 - Pliable conduit systems 208 MEAT 11 EN 61534-1:2011/FprA2:2020 Powertrack systems - Part 1: General requirements CLC/TC 213 Devices for the connection of luminaires for household and similar purpos- 209 MEAT 11 EN 61995-1:2008/A11:2021 CLC/TC 23BX es - Part 1: General requirements Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs 210 MEAT 11 EN IEC 62020-1:2021 CLC/TC 23E for household and similar uses Type F and type B residual current operated circuit-breakers with and with- 211 MEAT 11 EN 62423:2012/A11:2021 CLC/TC 23E out integral overcurrent protection for household and similar uses Power frequency overvoltage protective devices (POPs) for household and 212 MEAT 11 FprEN IEC 63052:2019 CLC/TC 23E similar applications 213 MEAT 12 EN 60127-2:2014/FprA1:2020 Miniature fuses - Part 2: Cartridge fuse-links CLC/SR 32C Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for 214 MEAT 12 EN 60269-6:2011/FprA1:2021 CLC/SR 32B the protection of solar photovoltaic energy systems

15 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use 215 MEAT 12 HD 60269-2:2013/A1:2017 by authorized persons (fuses mainly for industrial application) - Examples CLC/SR 32B of standardized systems of fuses A to K Insulators for overhead lines with a nominal voltage above 1000 V - Ceram- 216 MEAT 15 EN IEC 60305:2021 ic or glass insulator units for AC systems - Characteristics of insulator units CLC/SR 36 of the cap and pin type Insulators for overhead lines with a nominal voltage above 1000 V - Ceram- 217 MEAT 15 EN IEC 60433:2021 ic insulators for AC systems - Characteristics of insulator units of the long CLC/SR 36 rod type Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a 218 MEAT 16 EN ISO 4037-1:2021 CEN/TC 430 function of photon energy - Part 1: Radiation characteristics and production methods (ISO 4037-1:2019) Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as 219 MEAT 16 EN ISO 4037-2:2021 a function of photon energy - Part 2: Dosimetry for radiation protection CEN/TC 430 over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV (ISO 4037-2:2019) Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a 220 MEAT 16 EN ISO 4037-3:2021 function of photon energy - Part 3: Calibration of area and personal dose- CEN/TC 430 meters and the measurement of their response as a function of energy and angle of incidence (ISO 4037-3:2019) Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a 221 MEAT 16 EN ISO 4037-4:2021 CEN/TC 430 function of photon energy - Part 4: Calibration of area and personal dose- meters in low energy X reference radiation fields (ISO 4037-4:2019) Nuclear fuel technology - Determination of the isotopic and elemental 222 MEAT 16 EN ISO 8299:2021 uranium and plutonium concentrations of nuclear materials in nitric acid CEN/TC 430 solutions by thermal-ionization mass spectrometry (ISO 8299:2019) Uranium dioxide powder - Determination of apparent density and tap 223 MEAT 16 EN ISO 9161:2021 CEN/TC 430 density (ISO 9161:2019) Nuclear energy - Nuclear fuel technology - Determination of plutonium in 224 MEAT 16 EN ISO 9463:2021 CEN/TC 430 nitric acid solutions by spectrophotometry (ISO 9463:2019) Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing 225 MEAT 16 EN ISO 11929-1:2021 CEN/TC 430 radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2019) Determination of the characteristics limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing 226 MEAT 16 EN ISO 11929-2:2021 CEN/TC 430 radiation - Fundamentals and application - Part 2: Advanced applications (ISO 11929-2:2019) Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing 227 MEAT 16 EN ISO 11929-3:2021 CEN/TC 430 radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2019) Safe transport of radioactive materials - Leakage testing on packages (ISO 228 MEAT 16 EN ISO 12807:2021 CEN/TC 430 12807:2018) Radiological protection - Criteria and performance limits for the periodic 229 MEAT 16 EN ISO 14146:2021 CEN/TC 430 evaluation of dosimetry services (ISO 14146:2018) Nuclear fuel technology - Guidelines for ceramographic preparation of UO2 230 MEAT 16 EN ISO 16793:2021 CEN/TC 430 sintered pellets for microstructure examination (ISO 16793:2018) Nuclear fuel technology - Dissolution of plutonium dioxide-containing 231 MEAT 16 EN ISO 18256-1:2021 materials - Part 1: Dissolution of plutonium dioxide powders (ISO 18256- CEN/TC 430 1:2019) Nuclear fuel technology - Dissolution of plutonium dioxide-containing ma- 232 MEAT 16 EN ISO 18256-2:2021 CEN/TC 430 terials - Part 2: Dissolution of MOX pellets and powders (ISO 18256-2:2019) Radiological protection - Performance criteria for laboratories using Fluo- 233 MEAT 16 EN ISO 20046:2021 rescence In Situ Hybridization (FISH) translocation assay for assessment of CEN/TC 430 exposure to ionizing radiation (ISO 20046:2019) Clinical dosimetry - Dosimetry with solid thermoluminescence detectors for 234 MEAT 16 EN ISO 28057:2021 CEN/TC 430 photon and electron radiations in radiotherapy (ISO 28057:2019) Radiation protection instrumentation - Equipment for measuring the activ- 235 MEAT 16 EN IEC 61563:2021 CLC/TC 45B ity concentration of gamma-emitting radionuclides in foodstuffs Radiation protection instrumentation - Installed radiation portal monitors 236 MEAT 16 EN IEC 62244:2021 (RPMs) for the detection of illicit trafficking of radioactive and nuclear CLC/TC 45B materials Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: 237 MEAT 16 EN IEC 62566-2:2020 CLC/TC 45AX HDL-programmed integrated circuits for systems performing category B or C functions

16 Nuclear instrumentation - Data format for list mode digital data acquisition 238 MEAT 16 EN IEC 63047:2021 CLC/TC 45B used in radiation detection and measurement Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic 239 MEAT 17 EN IEC 60747-17:2020 CLC/SR 47E and reinforced insulation Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic 240 MEAT 17 EN IEC 60747-17:2020/AC:2021-02 CLC/SR 47E and reinforced insulation Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet 241 MEAT 17 FprEN IEC 62228-5:2021 CLC/SR 47A transceivers Electronic components - Long-term storage of electronic semiconductor 242 MEAT 17 EN IEC 62435-7:2021 CLC/SR 47 devices - Part 7: Micro-electromechanical devices Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings, 243 MEAT 19 FprEN IEC 60068-2-70:2020 CLC/SR 104 lettering, surfaces and materials caused by rubbing of fingertips and hands Environmental testing - Part 2-38: Tests - Test Z/AD: Composite tempera- 244 MEAT 19 FprEN IEC 60068-2-38:2021 CLC/SR 104 ture/humidity cyclic test 245 MEAT 19 FprEN IEC 60068-2-11:2020 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist CLC/SR 104 246 MEAT 19 FprEN IEC 60068-2-13:2020 Environmental testing - Part 2-13: Tests - Test M: Low air pressure CLC/SR 104 247 MEAT 19 EN IEC 62474:2019/A1:2021 Material declaration for products of and for the electrotechnical industry CLC/TC 111X Magnetic materials - Part 9: Methods of determination of the geometrical 248 MEAT 20 prEN 60404-9:2018 CLC/SR 68 characteristics of electrical steel strip and sheet Magnetic powder cores - Guidelines on dimensions and the limits of sur- 249 MEAT 20 EN IEC 63182-2:2020 CLC/SR 51 face irregularities - Part 2: Ring-cores Test procedure for the determination of the temperature index of enam- 250 MEAT 21 EN IEC 60172:2021 CLC/TC 55 elled and tape wrapped winding wires Thermocouples - Part 3: Extension and compensating cables - Tolerances 251 MEAT 23 FprEN IEC 60584-3:2020 CLC/TC 65X and identification system Safety requirements for electrical equipment for measurement, control 252 MEAT 23 EN IEC 61010-2-202:2021 and laboratory use - Part 2-202: Particular requirements for electrically CLC/TC 65X operated valve actuators Industrial-process measurement and control - Programmable controllers - 253 MEAT 23 EN 61131-2:2017 CLC/TC 65X Part 2: Equipment requirements and tests Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, 254 MEAT 23 FprEN IEC 61326-2-4:2020 operational conditions and performance criteria for insulation monitoring CLC/TC 65X devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, 255 MEAT 23 FprEN IEC 61326-2-5:2020 CLC/TC 65X operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, 256 MEAT 23 FprEN IEC 61326-2-1:2020 CLC/TC 65X operational conditions and performance criteria for sensitive test and mea- surement equipment for EMC unprotected applications Electrical equipment for measurement, control and laboratory use - EMC 257 MEAT 23 FprEN IEC 61326-1:2020 CLC/TC 65X requirements - Part 1: General requirements Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, oper- 258 MEAT 23 FprEN IEC 61326-2-3:2020 CLC/TC 65X ational conditions and performance criteria for transducers with integrated or remote signal conditioning Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, 259 MEAT 23 FprEN IEC 61326-2-2:2020 CLC/TC 65X operational conditions and performance criteria for portable testing, mea- suring and monitoring equipment used in low-voltage distribution systems Electrical equipment for measurement, control and laboratory use - EMC 260 MEAT 23 FprEN IEC 61326-2-6:2020 requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) CLC/TC 65X medical equipment Industrial communication networks - Profiles - Part 3-X: Functional safety 261 MEAT 23 FprEN IEC 61784-3-X:2021 CLC/TC 65X - Additional specifications for CPF X Industrial communication networks - Profiles - Part 3: Functional safety 262 MEAT 23 FprEN IEC 61784-3:2020 CLC/TC 65X fieldbuses - General rules and profile definitions 263 MEAT 23 FprEN IEC 62061:2020 Safety of machinery - Functional safety of safety-related control systems CLC/TC 44X Engineering data exchange format for use in industrial automation systems 264 MEAT 23 EN IEC 62714-4:2020/AC:2020-12 CLC/TC 65X engineering - Automation markup language - Part 4: Logic 265 MEAT 23 EN IEC 62769-101-1:2021 Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 CLC/TC 65X Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus 266 MEAT 23 EN IEC 62769-101-2:2021 CLC/TC 65X HSE 267 MEAT 23 EN IEC 62769-4:2021 Field Device Integration (FDI) - Part 4: FDI Packages CLC/TC 65X 268 MEAT 23 EN IEC 62769-7:2021 Field Device Integration (FDI) - Part 7: Communication Devices CLC/TC 65X

17 269 MEAT 23 EN IEC 62769-6:2021 Field Device Integration (FDI) - Part 6: Technology Mapping CLC/TC 65X 270 MEAT 23 EN IEC 62769-2:2021 Field Device Integration (FDI) - Part 2: FDI Client CLC/TC 65X 271 MEAT 23 EN IEC 62769-5:2021 Field Device Integration (FDI) - Part 5: Information Model CLC/TC 65X 272 MEAT 23 EN IEC 62769-3:2021 Field Device Integration (FDI) - Part 3: Server CLC/TC 65X 273 MEAT 23 EN IEC 62769-150-1:2021 Field device integration (FDI) - Part 150-1: Profiles - ISA100 WIRELESS CLC/TC 65X 274 MEAT 23 EN IEC 62796-1:2021 Field Device Integration (FDI) - Part 1: Overview CLC/TC 65X Industrial-process measurement, control and automation - Digital factory 275 MEAT 23 EN IEC 62832-1:2020 CLC/TC 65X framework - Part 1: General principles Industrial-process measurement, control and automation - Digital factory 276 MEAT 23 EN IEC 62832-2:2020 CLC/TC 65X framework - Part 2: Model elements Industrial-process measurement, control and automation - Digital factory 277 MEAT 23 EN IEC 62832-3:2020 framework - Part 3: Application of Digital Factory for life cycle manage- CLC/TC 65X ment of production systems 278 MEAT 24 EN 50699:2020 Recurrent Tests of Electrical Equipment CLC/BTTF 160-1 Safety requirements for electrical equipment for measurement, control 279 MEAT 24 EN 61010-031:2015/FprA1:2018 and laboratory use - Part 031: Safety requirements for hand-held and CLC/TC 66X hand-manipulated probe assemblies for electrical test and measurement Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measure- 280 MEAT 24 EN IEC 61010-2-034:2021 CLC/TC 66X ment equipment for insulation resistance and test equipment for electric strength Safety requirements for electrical equipment for measurement, control 281 MEAT 24 FprEN IEC 61010-2-091:2018 and laboratory use - Part 2-091: Particular requirements for cabinet X-ray CLC/TC 66X systems Safety requirements for electrical equipment for measurement, control, 282 MEAT 24 EN IEC 61010-2-030:2021 and laboratory use - Part 2-030: Particular requirements for equipment CLC/TC 66X having testing or measuring circuits Safety requirements for electrical equipment for measurement, control, 283 MEAT 24 EN IEC 61010-2-040:2020 and laboratory use - Part 2-040: Particular requirements for sterilizers and CLC/TC 66X washer-disinfectors used to treat medical materials Safety requirements for electrical equipment for measurement, control 284 MEAT 24 FprEN IEC 61010-2-012:2019 and laboratory use - Part 2-012: Particular requirements for climatic and CLC/TC 66X environmental testing and other temperature conditioning equipment Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held 285 MEAT 24 FprEN IEC 61010-2-033:2019 CLC/TC 66X multimeters and other meters for domestic and professional use, capable of measuring mains voltage Safety requirements for electrical equipment for measurement, control, 286 MEAT 24 FprEN IEC 61010-2-130:2020 and laboratory use - Particular requirements for equipment intended to be CLC/TC 66X used in educational establishments by children Safety requirements for electrical equipment for measurement, control, 287 MEAT 24 EN IEC 61010-2-030:2021/A11:2021 and laboratory use - Part 2-030: Particular requirements for equipment CLC/TC 66X having testing or measuring circuits Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measure- 288 MEAT 24 EN IEC 61010-2-034:2021/A11:2021 CLC/TC 66X ment equipment for insulation resistance and test equipment for electric strength Safety requirements for electrical equipment for measurement, control 289 MEAT 24 FprEN IEC 61010-2-032:2019 and laboratory use - Part 2-032: Particular requirements for hand-held and CLC/TC 66X hand-manipulated current sensors for electrical test and measurement Ultrasonics - Transducers - Definitions and measurement methods regard- 290 MEAT 26 EN IEC 61828:2021 CLC/SR 87 ing focusing for the transmitted fields Private security provision for the protection of Critical Infrastructure - Part 291 MEAT 27 FprEN 17483-1 CEN/TC 439 1: General requirements Alarm systems - Alarm transmission systems and equipment - Part 3: 292 MEAT 27 EN 50136-3:2013/FprA1 CLC/TC 79 Requirements for Receiving Centre Transceiver (RCT) Powerline communication apparatus used in low voltage installations - 293 MEAT 30 EN 50561-1:2013/FprAA:2019 Radio disturbance characteristics - Limits and methods of measurement CLC/TC 210 - Part 1: Apparatus for in-home use Power line communication apparatus used in low-voltage installations - 294 MEAT 30 prEN 50561-4 Radio disturbance characteristics - Limits and methods of measurement CLC/TC 210 - Part 4: Apparatus using MIMO technology Power line communication apparatus used in low voltage installations - 295 MEAT 30 FprEN 50561-2 Radio disturbance characteristics - Limits and methods of measurement CLC/TC 210 - Part 2: Apparatus for access-network use Industrial, scientific and medical equipment - Radio-frequency disturbance EN 55011:2016/FprA2:2018 296 MEAT 30 characteristics - Limits and methods of measurement - Amendment 2: CLC/TC 210 {fragment 2} Requirements for semiconductor power converters (SPC)

18 Vehicles, boats and devices with internal combustion engines or traction 297 MEAT 30 FprEN IEC 55012:2018 batteries - Radio disturbance characteristics - Limits and methods of mea- CLC/TC 210 surement for the protection of off-board receivers Electromagnetic compatibility - Requirements for household appliances, 298 MEAT 30 FprEN IEC 55014-1:2020 CLC/TC 210 electric tools and similar apparatus - Part 1: Emission Electromagnetic compatibility - Requirements for household appliances, 299 MEAT 30 FprEN IEC 55014-2:2020 electric tools and similar apparatus - Part 2: Immunity - Product family CLC/TC 210 standard Electromagnetic compatibility of multimedia equipment - Emission 300 MEAT 30 EN 55032:2015/A1:2020 CLC/TC 210 requirements Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emis- 301 MEAT 30 prEN IEC 61000-6-3:2019 CLC/TC 210 sion standard for equipment in residential environments Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmon- 302 MEAT 30 EN IEC 61000-3-2:2019/A1:2021 CLC/TC 210 ic current emissions (equipment input current =16 A per phase) Superconductivity - Part 17: Electronic characteristic measurements - Local 303 MEAT 34 FprEN IEC 61788-17:2021 critical current density and its distribution in large-area superconducting CLC/SR 90 films Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage 304 MEAT 35 EN IEC 60904-1:2020 CLC/TC 82 characteristics Photovoltaic devices - Part 10: Methods of linear dependence and linearity 305 MEAT 35 EN IEC 60904-10:2020 CLC/TC 82 measurements Photovoltaic devices - Part 9: Classification of solar simulator characteris- 306 MEAT 35 EN IEC 60904-9:2020 CLC/TC 82 tics Terrestrial photovoltaic (PV) modules - Design qualification and type 307 MEAT 35 FprEN IEC 61215-1:2020 CLC/TC 82 approval - Part 1: Test requirements Terrestrial photovoltaic (PV) modules - Design qualification and type 308 MEAT 35 FprEN IEC 61215-1-1:2020 approval - Part 1-1: Special requirements for testing of crystalline silicon CLC/TC 82 photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 309 MEAT 35 FprEN IEC 61215-1-2:2020 approval - Part 1-2: Special requirements for testing of thin-film Cadmium CLC/TC 82 Telluride (CdTe) based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type ap- 310 MEAT 35 FprEN IEC 61215-1-3:2020 proval - Part 1-3: Special requirements for testing of thin-film amorphous CLC/TC 82 silicon based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 311 MEAT 35 FprEN IEC 61215-2:2020 CLC/TC 82 approval - Part 2: Test procedures Terrestrial photovoltaic (PV) modules - Design qualification and type 312 MEAT 35 FprEN IEC 61215-1-4:2020 approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA) CLC/TC 82 (S,Se)2 based photovoltaic (PV) modules Wind energy generation systems - Part 6: Tower and foundation design 313 MEAT 35 EN IEC 61400-6:2020/AC:2020-12 CLC/TC 88 requirements Safety of power converters for use in photovoltaic power systems - Part 3: 314 MEAT 35 FprEN IEC 62109-3:2020 Particular requirements for electronic devices in combination with photo- CLC/TC 82 voltaic elements Concentrator photovoltaic (CPV) solar cells and cell on carrier (CoC) assem- 315 MEAT 35 EN IEC 62787:2021 CLC/TC 82 blies - Qualification Amendment 1 - Photovoltaic power generating systems - EMC requirements 316 MEAT 35 EN 62920:2017/FprA1:2021 CLC/TC 82 and test methods for power conversion equipment Adjustable speed electrical power drive systems - Part 5-1: Safety require- 317 MEAT 36 EN 61800-5-1:2007/A11:2021 CLC/TC 22X ments - Electrical, thermal and energy Adjustable speed electrical power drive systems - Part 1: General require- 318 MEAT 36 EN IEC 61800-1:2021 ments - Rating specifications for low voltage adjustable speed DC power CLC/TC 22X drive systems Adjustable speed electrical power drive systems - Part 5-3: Safety re- 319 MEAT 36 FprEN IEC 61800-5-3:2020 quirements - Functional, electrical and environmental requirements for CLC/TC 22X encoders Adjustable speed electrical power drive systems - Part 2: General require- 320 MEAT 36 FprEN IEC 61800-2:2020 CLC/TC 22X ments - Rating specifications for adjustable speed a.c. power drive systems Determination of power losses in high-voltage direct current (HVDC) con- 321 MEAT 36 EN IEC 61803:2020 CLC/TC 22X verter stations with line-commutated converters 322 MEAT 36 EN IEC 62040-1:2019/A11:2021 Uninterruptible power systems (UPS) - Part 1: Safety requirements CLC/TC 22X Uninterruptible power systems (UPS) - Part 3: Method of specifying the 323 MEAT 36 FprEN IEC 62040-3:2021 CLC/TC 22X performance and test requirements Safety requirements for power electronic converter systems and equip- 324 MEAT 36 EN 62477-1:2012/A12:2021 CLC/TC 22X ment - Part 1: General 325 MEAT 37 FprEN 61071:2017 Capacitors for power electronics CLC/SR 33 326 MEAT 37 FprEN 61921:2017 Power capacitors - Low-voltage power factor correction banks CLC/SR 33 Shunt power capacitors of the self-healing type for AC systems having a 327 MEAT 37 FprEN IEC 63210:2020 CLC/SR 33 rated voltage above 1 000 V

19 Safety of laser products - Part 1: Equipment classification and require- 328 MEAT 38 EN 60825-1:2014/A11:2021 CLC/TC 76 ments Safety of laser products - Part 2: Safety of optical fibre communication 329 MEAT 38 FprEN IEC 60825-2:2020 CLC/TC 76 systems (OFCSs) Gas welding equipment - Rubber hoses for welding, cutting and allied 330 MEAT 39 FprEN ISO 3821 CEN/TC 121 processes (ISO/FDIS 3821:2017) 331 MEAT 39 EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995) CEN/TC 121 Resistance welding equipment - Water-cooled secondary connection cables 332 MEAT 39 FprEN ISO 8205 - Dimensions and requirements for double-conductor connection cables CEN/TC 121 (ISO/FDIS 8205:2020) Soft soldering fluxes - Classification and requirements - Part 2: Perfor- 333 MEAT 39 EN ISO 9454-2:2020 CEN/TC 121 mance requirements (ISO 9454-2:2020) Soft soldering fluxes - Test methods - Part 9: Determination of ammonia 334 MEAT 39 EN ISO 9455-9:2020 CEN/TC 121 content (ISO 9455-9:2020) Gas welding equipment - Marking for equipment used for gas welding, 335 MEAT 39 EN ISO 10225:2021 CEN/TC 121 cutting and allied processes (ISO 10225:2013) Resistance welding equipment - Transformers - Integrated transformers for 336 MEAT 39 EN ISO 10656:2021 CEN/TC 121 welding guns (ISO 10656:2016, Corrected version 2016-08) Thermal spraying - Thermally sprayed coatings - Symbolic representation 337 MEAT 39 FprEN ISO 12671 CEN/TC 240 on drawings (ISO/FDIS 12671:2020) Electron and laser-beam welded joints - Requirements and recommenda- 338 MEAT 39 EN ISO 13919-2:2021 tions on quality levels for imperfections - Part 2: Aluminium, magnesium CEN/TC 121 and their alloys and pure copper (ISO 13919-2:2021) Acceptance tests for CO2-laser beam machines for high quality welding and 339 MEAT 39 EN ISO 15616-4:2021 CEN/TC 121 cutting - Part 4: Machines with 2-D moving optics (ISO 15616-4:2008) Welding - Micro joining of second generation high temperature supercon- 340 MEAT 39 FprEN ISO 17279-3 CEN/TC 121 ductors - Part 3: Test methods for joints (ISO/FDIS 17279-3:2020) Resistance welding - Spot welding of aluminium and aluminium alloys - 341 MEAT 39 EN ISO 18595:2021 CEN/TC 121 Weldability, welding and testing (ISO 18595:2021) Friction stir spot welding - Aluminium - Part 1: Vocabulary (ISO 18785- 342 MEAT 39 EN ISO 18785-1:2021 CEN/TC 121 1:2018) Friction stir spot welding - Aluminium - Part 2: Design of weld joints (ISO 343 MEAT 39 EN ISO 18785-2:2021 CEN/TC 121 18785-2:2018) Friction stir spot welding - Aluminium - Part 3: Qualification of welding 344 MEAT 39 EN ISO 18785-3:2021 CEN/TC 121 personnel (ISO 18785-3:2018) Friction stir spot welding - Aluminium - Part 4: Specification and qualifica- 345 MEAT 39 EN ISO 18785-4:2021 CEN/TC 121 tion of welding procedures (ISO 18785-4:2018) Friction stir spot welding - Aluminium - Part 5: Quality and inspection 346 MEAT 39 EN ISO 18785-5:2021 CEN/TC 121 requirements (ISO 18785-5:2018) Resistance welding - Locking tapers for electrode holders and electrode 347 MEAT 39 EN ISO 20168:2021 CEN/TC 121 caps (ISO 20168:2016) Destructive tests on welds in metallic materials - Hardness testing of nar- 348 MEAT 39 EN ISO 22826:2021 row joints welded by laser and electron beam (Vickers and Knoop hardness CEN/TC 121 tests) (ISO 22826:2005) Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) 349 MEAT 39 FprEN IEC 60974-10:2020 CLC/TC 26 requirements Arc welding equipment - Part 8: Gas consoles for welding and plasma 350 MEAT 39 FprEN IEC 60974-8:2021 CLC/TC 26 cutting systems 351 MEAT 39 FprEN IEC 60974-13:2021 Arc welding equipment - Part 13: Welding current return clamp CLC/TC 26 352 MEAT 39 FprEN IEC 60974-11:2021 Arc welding equipment - Part 11: Electrode holders CLC/TC 26 Resistance welding equipment - Part 2: Electromagnetic compatibility 353 MEAT 39 FprEN IEC 62135-2:2020 CLC/TC 26 (EMC) requirements Non-destructive testing - Penetrant testing - Part 1: General principles (ISO/ 354 MEAT 40 FprEN ISO 3452-1 CEN/TC 138 FDIS 3452-1:2021) Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant 355 MEAT 40 FprEN ISO 3452-2 CEN/TC 138 materials (ISO/FDIS 3452-2:2021) Non-destructive testing - Characteristics of focal spots in industrial X-ray 356 MEAT 40 EN 12543-2:2021 systems for use in non-destructive testing - Part 2: Pinhole camera radio- CEN/TC 138 graphic method Non-destructive testing - Ultrasonic testing - Examination for loss of thick- 357 MEAT 40 EN 17290:2021 CEN/TC 138 ness due to erosion and/or corrosion using the TOFD technique Non-destructive testing - Acoustic emission testing - In-service acoustic 358 MEAT 40 EN 17391:2021 emission monitoring of metallic pressure equipment and structures - Gen- CEN/TC 138 eral requirements Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 359 MEAT 40 EN ISO 23243:2020 CEN/TC 138 23243:2020) 360 MEAT 40 CEN ISO/TS 25107:2019 Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019) CEN/TC 138

20 CEN/TC 459/ 361 MEAT 42 FprEN 10138-2 Prestressing steels - Part 2: Wire SC 4 CEN/TC 459/ 362 MEAT 42 FprEN 10138-1 Prestressing steels - Part 1: General requirements SC 4 CEN/TC 459/ 363 MEAT 42 FprEN 10138-3 Prestressing steels - Part 3: Strand SC 4 CEN/TC 459/ 364 MEAT 42 FprEN 10138-4 Prestressing steels - Part 4: Bar SC 4 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels CEN/TC 459/ 365 MEAT 42 EN 10222-4:2017/FprA1 with high proof strength SC 11 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic CEN/TC 459/ 366 MEAT 42 EN 10222-2:2017/FprA1 steels with specified elevated temperatures properties SC 11 Open die steel forgings for general engineering purposes - Part 4: Stainless CEN/TC 459/ 367 MEAT 42 FprEN 10250-4 steels SC 11 CEN/TC 459/ 368 MEAT 42 CEN/TR 10347:2006 Guidance for forming of structural steels in processing SC 3 CEN/TC 459/ 369 MEAT 42 EN 10371:2021 Metallic materials - Small punch test method SC 1 Determination of the physical and mechanical properties of steels using CEN/TC 459/ 370 MEAT 42 FprEN 10373 models SC 12 Metallic materials - Determination of forming-limit curves for sheet and CEN/TC 459/ 371 MEAT 42 EN ISO 12004-1:2020 strip - Part 1: Measurement and application of forming-limit diagrams in SC 1 the press shop (ISO 12004-1:2020) Metallic materials - Determination of forming-limit curves for sheet and CEN/TC 459/ 372 MEAT 42 FprEN ISO 12004-2 strip - Part 2: Determination of forming-limit curves in the laboratory (ISO/ SC 1 FDIS 12004-2:2020) 373 MEAT 46 FprEN ISO 28080 Hardmetals - Abrasion tests for hardmetals (ISO/FDIS 28080:2020) CEN/SS M11 Technical product documentation (TPD) - Presentation of dimensions and 374 MEAT 55 EN ISO 129-1:2019/A1:2021 tolerances - Part 1: General principles - Amendment 1 (ISO 129-1:2018/Amd CEN/SS F01 1:2020) Technical product documentation - Sizes and layout of drawing sheets - 375 MEAT 55 EN ISO 5457:1999/A1:2010 CEN/SS F01 Amendment 1 (ISO 5457:1999/Amd 1:2010) Technical drawings - Screw threads and threaded parts - Part 1: General 376 MEAT 55 EN ISO 6410-1:1996 CEN/SS F01 conventions (ISO 6410-1:1993) Technical drawings - Screw threads and threaded parts - Part 2: Screw 377 MEAT 55 EN ISO 6410-2:1996 CEN/SS F01 thread inserts (ISO 6410-2:1993) Technical product documentation - Symbols used in technical product 378 MEAT 55 FprEN ISO 7083 CEN/SS F01 documentation - Proportions and dimensions (ISO/FDIS 7083:2021) Technical product documentation - Edges of undefined shape - Indication 379 MEAT 55 EN ISO 13715:2019 CEN/SS F01 and dimensioning (ISO 13715:2017) Geometrical product specifications (GPS) - ISO code system for tolerances 380 MEAT 58 EN ISO 286-1:2010/AC:2013 on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical CEN/TC 290 Corrigendum 1 (ISO 286-1:2010/Cor 1:2013) Geometrical product specifications (GPS) - ISO code system for toleranc- es on linear sizes - Part 2: Tables of standard tolerance classes and limit 381 MEAT 58 EN ISO 286-2:2010/AC:2013 CEN/TC 290 deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/ Cor 1:2013) Geometrical product specifications (GPS) - Geometrical tolerancing - 382 MEAT 58 EN ISO 22081:2021 General geometrical specifications and general size specifications (ISO CEN/TC 290 22081:2021) Paragliding equipment - Paragliders - Part 2: Requirements and test meth- 383 MEAT 66 EN 926-2:2013+A1:2020 CEN/TC 136 ods for classifying flight safety characteristics Paragliding equipment - Emergency parachutes - Safety requirements and 384 MEAT 66 EN 12491:2015+A1:2020 CEN/TC 136 test methods Swimming pool equipment - Part 1: General safety requirements and test 385 MEAT 66 EN 13451-1:2020 CEN/TC 136 methods for equipment installed in pools for public use Swimming pool equipment - Part 3: Additional specific safety requirements 386 MEAT 66 EN 13451-3:2020 and test methods for inlets and outlets and water/air based water leisure CEN/TC 136 features installed in pools for public use Gymnastic equipment - Individual and multifunctional vaulting boxes - 387 MEAT 66 EN 17461:2020 CEN/TC 136 Safety requirements and test methods Stationary training equipment - Part 2: Strength training equipment, 388 MEAT 66 FprEN ISO 20957-2 additional specific safety requirements and test methods (ISO/FDIS 20957- CEN/TC 136 2:2020) Stationary training equipment - Part 7: Rowing equipment, additional spe- 389 MEAT 66 FprEN ISO 20957-7 CEN/TC 136 cific safety requirements and test methods (ISO/FDIS 20957-7:2020) Agricultural machinery - Safety - Silage loading, mixing and/or chopping 390 MEAT 77 FprEN 703 CEN/TC 144 and distributing machines Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO/FDIS 391 MEAT 77 FprEN ISO 4254-17 CEN/TC 144 4254-17:2020)

21 Agricultural machinery - Safety - Part 1: General requirements - Amend- 392 MEAT 77 EN ISO 4254-1:2015/FprA1 CEN/TC 144 ment 1 (ISO 4254-1:2013/FDAM 1:2021) Snow throwers - Safety requirements and test procedures - Part 1: Termi- 393 MEAT 77 FprEN ISO 8437-1 CEN/TC 144 nology and common tests (ISO/FDIS 8437-1:2018) Snow throwers - Safety requirements and test procedures - Part 3: Ride-on 394 MEAT 77 FprEN ISO 8437-3 CEN/TC 144 snow throwers (ISO/FDIS 8437-3:2018) Snow throwers - Safety requirements and test procedures - Part 2: Pedes- 395 MEAT 77 FprEN ISO 8437-2 CEN/TC 144 trian-controlled snow throwers (ISO/FDIS 8437-2:2018) Snow throwers - Safety requirements and test procedures - Part 4: Addi- 396 MEAT 77 FprEN ISO 8437-4 CEN/TC 144 tional national and regional requirements (ISO/FDIS 8437-4:2018) Machinery for forestry - Safety requirements and testing for pole-mounted 397 MEAT 77 FprEN ISO 11680-2 powered pruners - Part 2: Machines for use with back-pack power source CEN/TC 144 (ISO/FDIS 11680-2:2021) Machinery for forestry - Portable chain-saw safety requirements and test- 398 MEAT 77 FprEN ISO 11681-2:2020 CEN/TC 144 ing - Part 2: Chain-saws for tree service (ISO/FDIS 11681-2:2020) Machinery for forestry - Portable chain-saw safety requirements and test- 399 MEAT 77 FprEN ISO 11681-1 CEN/TC 144 ing - Part 1: Chain-saws for forest service (ISO/FDIS 11681-1:2020) Agricultural and forestry machines - Inspection of sprayers in use - Part 5: 400 MEAT 77 EN ISO 16122-5:2020 CEN/TC 144 Aerial spray systems (ISO 16122-5:2020) Forestry and gardening machinery - Noise test code for portable hand-held 401 MEAT 77 EN ISO 22868:2021 machines with internal combustion engine - Engineering method (Grade 2 CEN/TC 144 accuracy) (ISO/FDIS 22868:2020) Equipment for crop protection - Knapsack combustion engine-driven air- 402 MEAT 77 FprEN ISO 28139 blast sprayers - Safety and environmental requirements and test methods CEN/TC 144 (ISO/FDIS 28139:2018) Natural gas vehicles - Requirements for NGV workshops and the manage- 403 MEAT 78 EN 13423:2021 CEN/TC 326 ment of compressed natural gas (CNG) vehicles 404 MEAT 78 FprEN 17278 Natural gas vehicles - Vehicle fuelling appliances CEN/TC 326 Road vehicles - Machines for mounting and demounting vehicle tyres - 405 MEAT 78 EN 17347:2021 CEN/TC 301 Safety requirements Rail dependent storage and retrieval equipment - Safety requirements for 406 MEAT 84 EN 528:2021 CEN/TC 149 S/R machines Machines for underground mines - Safety requirements for hydraulic pow- 407 MEAT 84 EN 1804-1:2020 CEN/TC 196 ered roof supports - Part 1: Support units and general requirements Machines for underground mines - Safety requirements for hydraulic pow- 408 MEAT 84 EN 1804-2:2020 CEN/TC 196 ered roof supports - Part 2: Power set legs and rams Machines for underground mines - Safety requirements for hydraulic pow- 409 MEAT 84 EN 1804-3:2020 CEN/TC 196 ered roof supports - Part 3: Hydraulic and electro hydraulic control systems Safety rules for the construction and installation of lifts - Particular appli- 410 MEAT 85 prEN 81-70 cations for passenger and goods passenger lift - Part 70: Accessibility to CEN/TC 10 lifts for persons including persons with disability Safety of escalators and moving walks - Part 2: Rules for the improvement 411 MEAT 85 FprEN 115-2 CEN/TC 10 of safety of existing escalators and moving walks Rough-terrain trucks - Safety requirements and verification - Part 4: Ad- 412 MEAT 85 EN 1459-4:2020 ditional requirements for variable-reach trucks handling freely suspended CEN/TC 150 loads Rough-terrain trucks - Safety requirements and verification - Part 5: 413 MEAT 85 EN 1459-5:2020 CEN/TC 150 Attachment interface Rough-terrain trucks - Safety requirements and verification - Part 9: 414 MEAT 85 EN 1459-9:2021 Variable-reach trucks equipped with work platforms having a front guard CEN/TC 150 that can be opened 415 MEAT 85 EN 12385-3:2020 Steel wire ropes - Safety - Part 3: Information for use and maintenance CEN/TC 168 416 MEAT 85 EN 12385-5:2021 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts CEN/TC 168 Cranes - General design - Part 3-5: Limit states and proof of competence of 417 MEAT 85 EN 13001-3-5:2016/FprA1 CEN/TC 147 forged and cast hooks 418 MEAT 85 EN 13001-2:2021 Crane safety - General design - Part 2: Load actions CEN/TC 147 Cranes - General design - Part 3-2: Limit states and proof of competence of 419 MEAT 85 EN 13001-3-2:2014/FprA1 CEN/TC 147 wire ropes in reeving systems Cranes - General design - Part 3-6: Limit states and proof of competence of 420 MEAT 85 EN 13001-3-6:2018/FprA1 CEN/TC 147 machinery - Hydraulic cylinders 421 MEAT 85 EN 13155:2020 Crane - Safety - Non-fixed load lifting attachments CEN/TC 147 422 MEAT 85 EN 13411-9:2021 Terminations for steel wire ropes - Safety - Part 9: Solid thimbles CEN/TC 168 423 MEAT 85 FprEN 13411-7 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket CEN/TC 168 424 MEAT 85 EN 13586:2020 Cranes - Access CEN/TC 147 425 MEAT 85 EN 13852-3:2021 Cranes - Offshore cranes - Part 3: Light offshore cranes CEN/TC 147 426 MEAT 85 FprEN 14492-1 Cranes - Power driven winches and hoists - Part 1: Power driven winches CEN/TC 147

22 427 MEAT 85 EN 15011:2020 Cranes - Bridge and gantry cranes CEN/TC 147 Steel static storage systems - Adjustable pallet racking systems - Principles 428 MEAT 85 EN 15512:2020 CEN/TC 344 for structural design 429 MEAT 85 FprEN 15620 Steel static storage systems - Tolerances, deformations and clearances CEN/TC 344 Powered industrial trucks - Visibility - Test methods and verification - Part 430 MEAT 85 EN 16842-5:2021 CEN/TC 150 5: Industrial variable-reach trucks greater than 10 000 kg capacity Powered industrial trucks - Visibility-Test methods and verification - Part 8: 431 MEAT 85 EN 16842-8:2021 CEN/TC 150 Stand-on counterbalance trucks up to and including 10 000 kg capacity 432 MEAT 85 EN 16851:2017+A1:2020 Cranes - Light crane systems CEN/TC 147 433 MEAT 85 EN 17076:2020 Tower cranes - Anti-collision systems - Safety requirements CEN/TC 147 Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral 434 MEAT 89 EN 1514-2:2014+A1:2021 CEN/TC 74 wound gaskets for use with steel flanges Flanges and their joints - Bolting - Part 4: Selection of bolting for equip- 435 MEAT 89 EN 1515-4:2021 CEN/TC 74 ment subject to the Pressure Equipment Directive 2014/68/EU Flanges and their joints - Gasket parameters and test procedures relevant 436 MEAT 89 EN 13555:2021 CEN/TC 74 to the design rules for gasketed circular flange connections Flanges and their joints - Quality assurance inspection and testing of gas- 437 MEAT 89 EN 14772:2021 CEN/TC 74 kets in accordance with the series of standards EN 1514 and EN 12560 Leather - Leather for apparel (excluding furs) - Specifications and sampling 438 MEAT 102 FprEN ISO 14931 CEN/TC 289 procedures (ISO/FDIS 14931:2021) Footwear - Critical substances potentially present in footwear and footwear 439 MEAT 102 FprEN ISO 16181-1 components - Part 1: Determination of phthalate with solvent extraction CEN/TC 309 (ISO/FDIS 16181-1:2020) Footwear - Critical substances potentially present in footwear and foot- 440 MEAT 102 FprEN ISO 16181-2 wear components - Part 2: Determination of phthalate without solvent CEN/TC 309 extraction (ISO/FDIS 16181-2:2021) Footwear - Critical substances potentially present in footwear and footwear 441 MEAT 102 FprEN ISO 16186 components - Determination of dimethyl fumarat (DMFU) (ISO/FDIS CEN/TC 309 16186:2021) Leather - Physical and mechanical tests - Determination of dimensional 442 MEAT 102 FprEN ISO 17130 CEN/TC 289 change (ISO/FDIS 17130:2020) Leather - Chemical determination of formaldehyde content - Part 1: Meth- 443 MEAT 102 FprEN ISO 17226-1 CEN/TC 289 od using high-performance liquid chromatography (ISO/FDIS 17226-1:2020) Leather - Determination of chlorinated hydrocarbons in leather - Part 1: 444 MEAT 102 FprEN ISO 18219-1 Chromatographic method for short-chain chlorinated paraffins (SCCPs) CEN/TC 289 (ISO/FDIS 18219-1:2021) Leather - Determination of chlorinated hydrocarbons in leather – Part 2: 445 MEAT 102 FprEN ISO 18219-2 Chromatographic method for middle-chain chlorinated paraffins (MCCPs) CEN/TC 289 (ISO/FDIS 18219-2:2021) Footwear - Attachment strength of straps, trims and accessories (ISO 446 MEAT 102 EN ISO 24263:2020 CEN/TC 309 24263:2020) Footwear - Test methods for whole shoe - Flexing durability (ISO 447 MEAT 102 EN ISO 24266:2020 CEN/TC 309 24266:2020) Leather - Chemical tests - Determination of free formaldehyde in process 448 MEAT 102 FprEN ISO 27587 CEN/TC 289 auxiliaries (ISO/FDIS 27587:2020) 449 MEAT 103 FprEN ISO 1140 Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO/FDIS 1140:2021) CEN/TC 248 450 MEAT 103 FprEN ISO 1141 Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO/DIS 1141:2020) CEN/TC 248 Fibre ropes - Polypropylene split film, monofilament and multifilament 451 MEAT 103 FprEN ISO 1346 (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and CEN/TC 248 12-strand ropes (ISO/FDIS 1346:2021) Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate with 452 MEAT 103 EN ISO 1833-3:2020 CEN/TC 248 certain other fibres (method using acetone) (ISO 1833-3:2020) Size designation of clothes - Part 1: Anthropometric definitions for body 453 MEAT 103 EN ISO 8559-1:2020 CEN/TC 248 measurement (ISO 8559-1:2017) Size designation of clothes - Part 2: Primary and secondary dimension 454 MEAT 103 EN ISO 8559-2:2020 CEN/TC 248 indicators (ISO 8559-2:2017) Nonwovens - Test methods - Part 4: Determination of tear resistance by the 455 MEAT 103 EN ISO 9073-4:2021 CEN/TC 248 trapezoid procedure (ISO 9073-4:2021) Textiles - Determination of fabric deformability by forced mechanical 456 MEAT 103 EN ISO 21765:2021 CEN/TC 248 distension (ISO 21765:2020) Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of 457 MEAT 103 FprEN ISO 22818 CEN/TC 248 different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (ISO/FDIS 22818:2020) Cleanrooms and associated controlled environments - Part 17: Particle 458 MEAT 106 EN ISO 14644-17:2021 CEN/TC 243 deposition rate applications (ISO 14644-17:2021) Elastomeric seals - Material requirements for pipe joint seals used in water 459 MEAT 108 FprEN 681-1 CEN/TC 208 and drainage applications - Part 1: Vulcanized rubber

23 Plastics piping systems for soil and waste discharge (low and high tem- 460 MEAT 108 EN 1329-1:2020 perature) within the building structure - Unplasticized poly(vinyl chloride) CEN/TC 155 (PVC-U) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for non-pressure underground drainage and sew- 461 MEAT 108 CEN/TS 1401-2:2020 erage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the CEN/TC 155 assessment of conformity Rubber and plastics hoses and hose assemblies — Hydrostatic testing (ISO/ 462 MEAT 108 FprEN ISO 1402 CEN/TC 218 FDIS 1402:2021) Plastics - Determination of the viscosity of polymers in dilute solution us- 463 MEAT 108 FprEN ISO 1628-1 CEN/TC 249 ing capillary viscometers - Part 1: General principles (ISO/FDIS 1628-1:2020) Rubber hoses and hose assemblies for sand and grit blasting - Specifica- 464 MEAT 108 EN ISO 3861:2021 CEN/TC 218 tion (ISO 3861:2021) Plastics - Determination of dynamic mechanical properties - Part 3: Flexur- 465 MEAT 108 FprEN ISO 6721-3 CEN/TC 249 al vibration - Resonance-curve method (ISO/FDIS 6721-3:2020) Rubber and plastics hoses and hose assemblies - Determination of resis- 466 MEAT 108 FprEN ISO 7233 CEN/TC 218 tance to vacuum (ISO/FDIS 7233:2021) Plastics piping systems for renovation of underground water supply net- 467 MEAT 108 FprEN ISO 11298-4 CEN/TC 155 works - Part 4: Lining with cured-in-place pipes (ISO/FDIS 11298-4:2020) Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of 468 MEAT 108 EN ISO 11357-4:2021 CEN/TC 249 specific heat capacity (ISO 11357-4:2021) Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination 469 MEAT 108 FprEN ISO 11357-8 CEN/TC 249 of thermal conductivity (ISO/FDIS 11357-8:2020) Rubber and thermoplastics hoses and hose assemblies for liquid or gas- 470 MEAT 108 EN 12115:2021 CEN/TC 218 eous chemicals - Specification Plastics warning devices for underground cables and pipelines with visual 471 MEAT 108 EN 12613:2021 CEN/TC 249 characteristics Testing of welded joints of thermoplastics semi-finished products - Part 2: 472 MEAT 108 EN 12814-2:2021 CEN/TC 249 Tensile test Testing of welded joints of thermoplastics semi-finished products - Part 8: 473 MEAT 108 EN 12814-8:2021 CEN/TC 249 Requirements Extruded sheets of polyethylene (PE-HD) - Requirements and test methods 474 MEAT 108 FprEN ISO 14632 CEN/TC 249 (ISO/FDIS 14632:2021) Plastics - Recycled plastics - Characterization of Polyethylene (PE) recy- 475 MEAT 108 FprEN 15344 CEN/TC 249 clates Plastics piping systems for hot and cold water installations - Crosslinked 476 MEAT 108 EN ISO 15875-2:2003/A2:2020 polyethylene (PE-X) - Part 2: Pipes - Amendment 2 (ISO 15875-2:2003/Amd CEN/TC 155 2:2020) Plastics piping systems for hot and cold water installations - Crosslinked 477 MEAT 108 EN ISO 15875-3:2003/A1:2020 polyethylene (PE-X) - Part 3: Fittings - Amendment 1 (ISO 15875-3:2003/ CEN/TC 155 Amd 1:2020) Plastics piping systems for hot and cold water installations - Crosslinked 478 MEAT 108 EN ISO 15875-5:2003/A1:2020 polyethylene (PE-X) - Part 5: Fitness for purpose of the system - Amend- CEN/TC 155 ment 1 (ISO 15875-5:2003/Amd 1:2020) Plastics piping systems for hot and cold water installations - Polybutene 479 MEAT 108 EN ISO 15876-2:2017/A1:2020 CEN/TC 155 (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2017/Amd 1:2020) Plastics piping systems for hot and cold water installations - Polybutene 480 MEAT 108 EN ISO 15876-3:2017/A1:2020 CEN/TC 155 (PB) - Part 3: Fittings - Amendment 1 (ISO 15876-3:2017/Amd 1:2020) Plastics piping systems for hot and cold water installations - Polybutene 481 MEAT 108 EN ISO 15876-5:2017/A1:2020 (PB) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15876- CEN/TC 155 5:2017/Amd 1:2020) Plastics piping systems for hot and cold water installations - Chlorinated 482 MEAT 108 EN ISO 15877-2:2009/A2:2020 poly(vinyl chloride) (PVC-C) - Part 2: Pipes - Amendment 2 (ISO 15877- CEN/TC 155 2:2009/Amd 2:2020) Plastics piping systems for hot and cold water installations - Chlorinated 483 MEAT 108 EN ISO 15877-5:2009/A2:2020 poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - CEN/TC 155 Amendment 2 (ISO 15877-5:2009/Amd 2:2020) 484 MEAT 108 FprEN 16296:2021 Imperfections in thermoplastics welded joints - Quality levels CEN/TC 249 Plastics piping systems for the supply of gaseous fuels - Unplasticized poly- 485 MEAT 108 FprEN ISO 16486-5 amide (PA-U) piping systems with fusion jointing and mechanical jointing CEN/TC 155 - Part 5: Fitness for purpose of the system (ISO/FDIS 16486-5:2021) Plastics - Determination of the degree of disintegration of plastic mate- 486 MEAT 108 FprEN ISO 16929 rials under defined composting conditions in a pilot-scale test (ISO/FDIS CEN/TC 249 16929:2020) Thermoplastics rigid protective wallcovering panels for internal use in 487 MEAT 108 EN 17104:2021 CEN/TC 249 buildings - Performance characteristics Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrica- 488 MEAT 108 FprEN 17508 CEN/TC 249 tion of windows and doors - Terminology of PVC based materials Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding 489 MEAT 108 EN ISO 21304-2:2021 and extrusion materials - Part 2: Preparation of test specimens and deter- CEN/TC 249 mination of properties (ISO 21304-2:2021)

24 Plastics piping systems for hot and cold water installations - Polyethylene 490 MEAT 108 EN ISO 22391-2:2009/A1:2020 of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 CEN/TC 155 (ISO 22391-2:2009/Amd 1:2020) Plastics piping systems for hot and cold water installations - Polyethylene 491 MEAT 108 EN ISO 22391-3:2009/A1:2020 of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 CEN/TC 155 (ISO 22391-3:2009/Amd 1:2020) Plastics piping systems for hot and cold water installations - Polyethylene 492 MEAT 108 EN ISO 22391-5:2009/A1:2020 of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of CEN/TC 155 the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020) Plastics piping systems for pressure and non-pressure water supply, drain- 493 MEAT 108 FprEN ISO 23856 age or sewerage - Glass-reinforced thermosetting plastics (GRP) systems CEN/TC 155 based on unsaturated polyester (UP) resin (ISO/FDIS 23856:2021) Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: 494 MEAT 108 EN ISO 24024-1:2021 CEN/TC 249 Designation system and basis for specifications (ISO 24024-1:2021) Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: 495 MEAT 108 EN ISO 24024-2:2021 Preparation of test samples and determination of properties (ISO 24024- CEN/TC 249 2:2021) 496 MEAT 109 FprEN 17019 Weigh-in-Motion of road vehicles - Requirements CEN/SS F05 Durability of wood and wood-based products - Test method against wood 497 MEAT 118 EN 113-1:2020 destroying basidiomycetes - Part 1: Assessment of biocidal efficacy of wood CEN/TC 38 preservatives Durability of wood and wood-based products - Test method against wood 498 MEAT 118 EN 113-2:2020 destroying basidiomycetes - Part 2: Assessment of inherent or enhanced CEN/TC 38 durability 499 MEAT 118 EN 1130:2019/AC:2020 Children's furniture - Cribs - Safety requirements and test methods CEN/TC 207 Wood flooring and wood panelling and cladding - Determination of geomet- 500 MEAT 118 EN 13647:2021 CEN/TC 175 rical characteristics Children's furniture - Mattresses for cots and cribs - Safety requirements 501 MEAT 118 EN 16890:2017/FprA1 CEN/TC 207 and test methods Wood flooring and parquet - Determination of top layer delamination of 502 MEAT 118 EN 17456:2021 CEN/TC 175 multilayer elements - Test method Woodworking machines - Safety - Part 17: Edge banding machines fed by 503 MEAT 118 FprEN ISO 19085-17 CEN/TC 142 chains (ISO/FDIS 19085-17:2021) Woodworking machines - Safety - Part 12: Tenoning/profiling machines 504 MEAT 118 FprEN ISO 19085-12 CEN/TC 142 (ISO/FDIS 19085-12:2020) Woodworking machines - Safety - Part 15: Presses (ISO/FDIS 19085- 505 MEAT 118 FprEN ISO 19085-15 CEN/TC 142 15:2020) Woodworking machines - Safety - Part 1: Common requirements (ISO/FDIS 506 MEAT 118 FprEN ISO 19085-1 CEN/TC 142 19085-1:2020) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test 507 MEAT 119 EN ISO 14705:2021 method for hardness of monolithic ceramics at room temperature (ISO CEN/TC 184 14705:2016) Fine ceramics (advanced ceramics, advanced technical ceramics) - Determi- 508 MEAT 119 EN ISO 17172:2021 CEN/TC 184 nation of compaction properties of ceramic powders (ISO 17172:2014) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test 509 MEAT 119 EN ISO 17562:2021 method for linear thermal expansion of monolithic ceramics by push-rod CEN/TC 184 technique (ISO 17562:2016) Fine ceramics (advanced ceramics, advanced technical ceramics) - Me- chanical properties of ceramic composites at ambient temperature in air 510 MEAT 119 EN ISO 18610:2021 CEN/TC 184 atmospheric pressure - Determination of elastic properties by ultrasonic technique (ISO 18610:2016) Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermo- 511 MEAT 119 EN ISO 19628:2021 physical properties of ceramic composites - Determination of specific heat CEN/TC 184 capacity (ISO 19628:2017) 512 MEAT 125 EN 71-2:2020 Safety of toys - Part 2: Flammability CEN/TC 52 Safety of toys - Part 4: Experimental sets for chemistry and related activi- 513 MEAT 125 EN 71-4:2020 CEN/TC 52 ties Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative 514 MEAT 125 FprEN 71-13 CEN/TC 52 games 515 MEAT 125 EN 71-3:2019+A1:2021 Safety of toys - Part 3: Migration of certain elements CEN/TC 52 Child care articles - Child carriers - Safety requirements and test methods - 516 MEAT 125 EN 13209-1:2021 CEN/TC 252 Part 1: Framed back carrier Electromechanical elementary relays - Part 4: General and safety require- 517 MEAT 128 EN IEC 61810-4:2020 CLC/SR 94 ments for reed relays Lamp caps and holders together with gauges for the control of inter- 518 MEAT 131 EN 60061-1:1993/A61:2021 CLC/TC 34 changeability and safety - Part 1: Lamp caps Lamp caps and holders together with gauges for the control of inter- 519 MEAT 131 EN 60061-2:1993/A57:2021 CLC/TC 34 changeability and safety - Part 2: Lampholders

25 Lamp caps and holders together with gauges for the control of inter- 520 MEAT 131 EN 60061-1:1993/A59:201X CLC/TC 34 changeability and safety - Part 1: Lamps Caps 521 MEAT 131 EN 60400:2017/FprA1:2019 Lampholders for tubular fluorescent lamps and starterholders CLC/TC 34 Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting 522 MEAT 131 EN IEC 60598-2-23:2021 CLC/TC 34 systems for ELV light sources 523 MEAT 131 EN IEC 60598-1:2021 Luminaires - Part 1: General requirements and tests CLC/TC 34 Luminaires - Part 2-1: Particular requirements - Fixed general purpose 524 MEAT 131 FprEN IEC 60598-2-1:2019 CLC/TC 34 luminaires Lamps and light sources for road vehicles - Dimensional, electrical and 525 MEAT 131 FprEN IEC 60809:2021 CLC/TC 34 luminous requirements 526 MEAT 131 EN 60838-1:2017/A2:2021 Miscellaneous lampholders - Part 1: General requirements and tests CLC/TC 34 Fluorescent ultraviolet lamps used for tanning - Measurement and specifi- 527 MEAT 131 EN IEC 61228:2020 CLC/TC 34 cation method 528 MEAT 131 EN 61347-1:2015/A1:2021 Lamp controlgear - Part 1: General and safety requirements CLC/TC 34 529 MEAT 131 FprEN IEC 61547:2020 Equipment for general lighting purposes - EMC immunity requirements CLC/TC 34 Organic light emitting diode (OLED) light sources for general lighting - 530 MEAT 131 FprEN IEC 62868-2-2:2020 CLC/TC 34 Safety - Part 2-2: Particular requirements - Integrated OLED modules Organic light emitting diode (OLED) light sources for general lighting 531 MEAT 131 FprEN IEC 62868-2-1:2020 - Safety - Part 2-1: Particular requirements for semi-integrated OLED CLC/TC 34 modules Organic light emitting diode (OLED) Light sources for general lighting - 532 MEAT 131 FprEN IEC 62868-1:2020 CLC/TC 34 Safety - Part 1: General requirements and tests Packaging of components for automatic handling - Part 1: Tape packaging 533 MEAT 135 EN 60286-1:2017/FprA1:2021 CLC/SR 40 of components with axial leads on continuous tapes Fixed capacitors for use in electronic equipment - Part 13: Sectional specifi- 534 MEAT 135 EN IEC 60384-13:2020 CLC/TC 40XA cation - Fixed polypropylene film dielectric metal foil DC capacitors EN IEC 60384-16:2019/AC:2020- Fixed capacitors for use in electronic equipment - Part 16: Sectional speci- 535 MEAT 135 CLC/TC 40XA 12 fication - Fixed metallized polypropylene film dielectric DC capacitors Fixed capacitors for use in electronic equipment - Part 17: Sectional 536 MEAT 135 EN IEC 60384-17:2019/AC:2021-01 specification - Fixed metallized polypropylene film dielectric AC and pulse CLC/TC 40XA capacitors Fixed capacitors for use in electronic equipment - Part 2: Sectional spec- 537 MEAT 135 FprEN IEC 60384-2:2021 ification - Fixed metallized polyethylene terephthalate film dielectric DC CLC/TC 40XA capacitors Communication networks and systems for power utility automation - Part 538 MEAT 140 EN 61850-4:2011/A1:2020 CLC/TC 57 4: System and project management Application integration at electric utilities - System interfaces for distribu- 539 MEAT 140 FprEN IEC 61968-3:2021 CLC/TC 57 tion management - Part 3: Interface for network operations Application integration at electric utilities - System interfaces for distri- 540 MEAT 140 FprEN IEC 61968-13:2020 bution management - Part 13: Common distribution power system model CLC/TC 57 profiles Energy management system application program interface (EMS-API) 541 MEAT 140 FprEN IEC 61970-600-2:2021 - Part 600-2: Common Grid Model Exchange Specification (CGMES) - CLC/TC 57 Exchange profiles specification Energy Management System Application Program Interface (EMS-API) – 542 MEAT 140 FprEN IEC 61970-457:2020 CLC/TC 57 Part 457: Dynamics profile Framework for energy market communications - Part 451-10: Profiles for 543 MEAT 140 EN IEC 62325-451-10:2021 CLC/TC 57 Energy Consumption Data ("My Energy Data") Framework for energy market communications - Part 451-7: Balancing 544 MEAT 140 FprEN IEC 62325-451-7:2020 CLC/TC 57 processes, contextual and assembly models for European style market Power systems management and associated information exchange - Data 545 MEAT 140 EN IEC 62351-6:2020 CLC/TC 57 and communications security - Part 6: Security for IEC 61850 Power line communication systems for power utility applications - Part 3: 546 MEAT 140 FprEN IEC 62488-3:2021 CLC/TC 57 Digital Power Line Carrier (DPLC) terminals and hybrid ADPLC terminals Maintenance - Maintenance within physical asset management - Frame- 547 MEAT 144 FprEN 17485 work for improving the value of the physical assets through their whole life CEN/TC 319 cycle Solderless connections - Part 7: Spring clamp connections - General re- 548 MEAT 145 EN IEC 60352-7:2021 CLC/SR 48B quirements, test methods and practical guidance Connectors for electrical and electronic equipment - Product require- ments - Part 3-122: Detail specification for 8-way, shielded, free and fixed 549 MEAT 145 FprEN IEC 61076-3-122:2021 CLC/SR 48B connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments Radio-frequency connectors - Part 15: Sectional specification - RF coaxial 550 MEAT 145 EN IEC 61169-15:2021 connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with CLC/SR 46F threaded coupling - Characteristic impedance 50 O (type SMA) Radio-frequency connectors - Part 65: Sectional specification for RF coaxi- 551 MEAT 145 EN IEC 61169-65:2021 al connectors, 1,35 mm inner diameter of outer conductor, with screw-cou- CLC/SR 46F pling, characteristic impedance 50 O

26 Radio-frequency connectors - Part 60: Sectional specification for RF co- 552 MEAT 145 FprEN IEC 61169-60:2021 axial connectors with push on mating - Characteristic impedance 50 Ohm CLC/SR 46F (type SMPM) Radio-frequency connectors - Part 66: Sectional specification for RF co- 553 MEAT 145 FprEN IEC 61169-66:2020 axial connectors with 5 mm inner diameter of outer conductor, with quick- CLC/SR 46F lock- or screw-coupling, characteristic impedance 50 Ohm (series 2,2-5) Mechanical structures for electrical and electronic equipment - Tests 554 MEAT 145 FprEN IEC 61587-6:2021 for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor CLC/SR 48D cabinets Multi-channel radio-frequency connectors - Part 2: Sectional specification 555 MEAT 145 EN IEC 63138-2:2021 CLC/SR 46F for MQ4 series circular connectors Connectors for Electrical and Electronic Equipment – Shielded or unshield- 556 MEAT 145 FprEN IEC 63171:2020 ed free and fixed connectors for balanced single-pair data transmission CLC/SR 48B with current carrying capacity - General requirements and tests Measurement of the complex permittivity for low-loss dielectric substrates 557 MEAT 145 EN IEC 63185:2021 CLC/SR 46F balanced-type circular disk resonator method Heat exchangers - Hydronic room fan coil units - Test procedures for estab- 558 MEAT 147 FprEN 1397 CEN/TC 113 lishing the performance Heat pumps with electrically driven compressors - Testing, performance 559 MEAT 147 EN 16147:2017/FprA1 CEN/TC 113 rating and requirements for marking of domestic hot water units Refrigerating systems and heat pumps - Valves - Requirements, testing and 560 MEAT 147 FprEN ISO 21922 CEN/TC 182 marking (ISO/FDIS 21922:2021) Blast chillers and freezers cabinets for professional use - Classification, 561 MEAT 147 FprEN ISO 22042 CEN/TC 44 requirements and test conditions (ISO/FDIS 22042:2020) Ice-cream freezers - Classification, requirements and test conditions (ISO 562 MEAT 147 EN ISO 22043:2020 CEN/TC 44 22043:2020) Safety of machinery - Safety requirements for the design and construction 563 MEAT 154 FprEN 1034-1 CEN/TC 198 of paper making and finishing machines - Part 1: Common requirements Textile machinery - Noise test code - Part 6: Fabric manufacturing machin- 564 MEAT 154 EN ISO 9902-6:2021 CEN/TC 214 ery (ISO 9902-6:2018) Graphic technology - Safety requirements for graphic technology equip- 565 MEAT 154 FprEN ISO 12643-2 ment and systems - Part 2: Prepress and press equipment and systems CEN/TC 198 (ISO/FDIS 12643-2:2020) Graphic technology - Safety requirements for graphic technology equip- 566 MEAT 154 FprEN ISO 12643-1 CEN/TC 198 ment and systems - Part 1: General requirements (ISO/FDIS 12643-1:2020) Safety requirements for wetlaid-nonwoven machinery (ISO/FDIS 567 MEAT 154 FprEN ISO 22291 CEN/TC 214 22291:2019) Metallic and oxide coatings - Measurement of coating thickness - Micro- 568 MEAT 157 FprEN ISO 1463 CEN/TC 262 scopical method (ISO/FDIS 1463:2021) Metallic and other inorganic coatings - Chromate conversion coatings on 569 MEAT 157 FprEN ISO 3613 zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test CEN/TC 262 methods (ISO/FDIS 3613:2021) Metallic coatings - Measurement of coating thickness - Profilometric 570 MEAT 157 FprEN ISO 4518 CEN/TC 262 method (ISO/FDIS 4518:2020) Corrosion of metals and alloys - Removal of corrosion products from corro- 571 MEAT 157 EN ISO 8407:2021 CEN/TC 262 sion test specimens (ISO 8407:2021) Corrosion of metals and alloys - Determination of AC corrosion - Protection 572 MEAT 157 EN ISO 18086:2020 CEN/TC 219 criteria (ISO 18086:2019) 573 MEAT 159 FprHD 603 S2:2016 Distribution cables of rated voltage 0,6/1 kV CLC/TC 20 Tests on electric and optical fibre cables under fire conditions - Part 1-2: 574 MEAT 159 EN 60332-1-2:2004/A12:2020 Test for vertical flame propagation for a single insulated wire or cable - CLC/TC 20 Procedure for 1 kW pre-mixed flame Communication cables - Part 2-27: Common design rules and construction 575 MEAT 160 prEN 50290-2-27 - Halogen free polyolefin based sheathing compounds for cables having CLC/TC 46X improved flame and fire properties (HFFR) Communication cables - Part 2-24: Common design rules and construction - 576 MEAT 160 prEN 50290-2-24 CLC/TC 46X Polyethylene sheathing compounds 577 MEAT 161 FprEN IEC 60086-2:2021 Primary batteries - Part 2: Physical and electrical specifications CLC/SR 35 578 MEAT 161 FprEN IEC 60086-1:2021 Primary batteries - Part 1: General CLC/SR 35 579 MEAT 161 FprEN IEC 60086-3:2021 Primary batteries - Part 3: Watch batteries CLC/SR 35 Safety of primary and secondary lithium cells and batteries during trans- 580 MEAT 161 EN IEC 62281:2019/FprA1:2020 CLC/SR 35 port Safety requirements for secondary batteries and battery installations - 581 MEAT 161 EN IEC 62485-5:2021 CLC/TC 21X Part 5: Safe operation of stationary lithium ion batteries Safety requirements for secondary batteries and battery installations - 582 MEAT 161 EN IEC 62485-6:2021 CLC/TC 21X Part 6: Safe operation of lithium-ion batteries in traction applications Secondary cells and batteries containing alkaline or other non-acid electro- 583 MEAT 161 EN IEC 63115-2:2021 lytes - Sealed nickel-metal hydride cells and batteries for use in industrial CLC/TC 21X applications - Part 2: Safety

27 Lead-acid batteries for propulsion power of lightweight vehicles - General 584 MEAT 161 EN IEC 63193:2021 CLC/TC 21X requirements and methods of test Insulation coordination for equipment within low-voltage supply systems - 585 MEAT 162 EN IEC 60664-1:2020/AC:2020-12 CLC/SR 109 Part 1: Principles, requirements and tests Electricity metering equipment - General requirements, tests and test 586 MEAT 164 FprEN IEC 62052-11:2020 CLC/TC 13 conditions - Part 11: Metering equipment Electricity metering equipment - Particular requirements - Part 21: Static 587 MEAT 164 FprEN IEC 62053-21:2020 CLC/TC 13 meters for AC active energy (classes 0,5, 1 and 2) Electricity metering equipment - Particular requirements - Part 23: Static 588 MEAT 164 FprEN IEC 62053-23:2020 CLC/TC 13 meters for reactive energy (classes 2 and 3) Electricity metering equipment - Particular requirements - Part 22: Static 589 MEAT 164 FprEN IEC 62053-22:2020 CLC/TC 13 meters for AC active energy (classes 0,1S, 0,2S and 0,5S) Electricity metering equipment - Particular requirements - Part 24: Static 590 MEAT 164 FprEN IEC 62053-24:2020 meters for fundamental component reactive energy (classes 0, 5S, 1S, 1, 2 CLC/TC 13 and 3) 591 MEAT 165 FprEN 62568:2015 Overhead lines - Method for fatigue testing of conductors CLC/TC 7X Direct acting indicating analogue electrical measuring instruments and 592 MEAT 166 FprEN IEC 60051-9:2018 CLC/TC 85X their accessories - Part 9: Recommended test methods Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 593 MEAT 166 FprEN 61557-12:2018 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 12: Power metering and monitoring devices (PMD) Electrical safety in low voltage distribution systems up to 1 000 V AC and 594 MEAT 166 FprEN IEC 61557-1:2019 1 500 V DC - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 1: General requirements Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective 595 MEAT 166 FprEN IEC 61557-11:2020 CLC/TC 85X measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protec- 596 MEAT 166 FprEN IEC 61557-4:2019 CLC/TC 85X tive measures - Part 4: Resistance of earth connection and equipotential bonding Electrical safety in low voltage distribution systems up to 1 000 V AC and 597 MEAT 166 FprEN IEC 61557-5:2019 1 500 V DC - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 5: Resistance to earth Electrical safety in low voltage distribution systems up to 1 000 V AC and FprEN IEC 61557-12:2018/ 598 MEAT 166 1 500 V DC - Equipment for testing, measuring or monitoring of protective CLC/TC 85X FprA1:2021 measures - Part 12: Power metering and monitoring devices (PMD) Electrical safety in low voltage distribution systems up to 1 000 V AC and 599 MEAT 166 FprEN IEC 61557-2:2019 1 500 V DC - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 2: Insulation resistance Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective 600 MEAT 166 FprEN IEC 61557-6:2019 CLC/TC 85X measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems Electrical safety in low voltage distribution systems up to 1 000 V AC and 601 MEAT 166 FprEN IEC 61557-3:2019 1 500 V DC - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 3: Loop impedance Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 602 MEAT 166 FprEN IEC 61557-7:2019 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective CLC/TC 85X measures - Part 7: Phase sequence 603 MEAT 167 FprEN IEC 62934:2021 Grid integration of renewable energy generation - Terms and definitions CLC/TC 8X 604 MEAT 169 EN 13480-3:2017/A1:2021 Metallic industrial piping - Part 3: Design and calculation CEN/TC 267 Petroleum and natural gas industries - Materials for use in H2S-containing 605 MEAT 169 EN ISO 15156-1:2020 environments in oil and gas production - Part 1: General principles for CEN/TC 12 selection of cracking-resistant materials (ISO 15156-1:2020) Petroleum and natural gas industries - Materials for use in H2S-containing 606 MEAT 169 EN ISO 15156-2:2020 environments in oil and gas production - Part 2: Cracking-resistant carbon CEN/TC 12 and low-alloy steels, and the use of cast irons (ISO 15156-2:2020) Petroleum and natural gas industries - Materials for use in H2S-containing 607 MEAT 169 EN ISO 15156-3:2020 environments in oil and gas production - Part 3: Cracking-resistant CRAs CEN/TC 12 (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020) Petroleum, petrochemical and natural gas industries - Life cycle costing 608 MEAT 169 FprEN ISO 15663 CEN/TC 12 (ISO/FDIS 15663:2020) Petroleum and natural gas industries - Fixed steel offshore structures (ISO 609 MEAT 169 EN ISO 19902:2020 CEN/TC 12 19902:2020) Petroleum and natural gas industries - Compact flanged connections with 610 MEAT 169 EN ISO 27509:2020 CEN/TC 12 IX seal ring (ISO 27509:2020) 611 MEAT 171 EN 1254-4:2021 Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings CEN/TC 133

28 Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings 612 MEAT 171 EN 1254-2:2021 CEN/TC 133 for use with copper tubes Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for 613 MEAT 171 EN 1254-6:2021 CEN/TC 133 use with metallic tubes, plastics and multilayer pipes Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread 614 MEAT 171 EN 1254-20:2021 CEN/TC 133 dimensions, test methods, reference data and supporting information Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use 615 MEAT 171 EN 1254-7:2021 CEN/TC 133 with metallic tubes Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings 616 MEAT 171 EN 1254-3:2021 CEN/TC 133 for use with plastics and multilayer pipes Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for 617 MEAT 171 EN 1254-1:2021 CEN/TC 133 soldering or brazing to copper tubes Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with 618 MEAT 171 EN 1254-5:2021 CEN/TC 133 short ends for brazing to copper tubes Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use 619 MEAT 171 EN 1254-8:2021 CEN/TC 133 with plastics and multilayer pipes 620 MEAT 171 EN 13600:2021 Copper and copper alloys - Seamless copper tubes for electrical purposes CEN/TC 133 Copper and copper alloys - Copper rod, bar and wire for general electrical 621 MEAT 171 FprEN 13601 CEN/TC 133 purposes Copper and copper alloys - Test methods for assessing protective tin coat- 622 MEAT 171 FprEN 13603 CEN/TC 133 ings on drawn round copper wire for electrical purposes Copper and copper alloys - Copper profiles and profiled wire for electrical 623 MEAT 171 FprEN 13605 CEN/TC 133 purposes Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non CEN/TC 459/ 624 MEAT 184 EN 10264-2:2021 alloy steel wire for ropes for general applications SC 6 Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for 625 MEAT 193 FprEN IEC 60068-2-20:2021 CLC/SR 91 solderability and resistance to soldering heat of devices with leads Surface mounting technology - Part 3: Standard method for the specifica- 626 MEAT 193 EN IEC 61760-3:2021 CLC/SR 91 tion of components for through-hole reflow (THR) soldering 627 MEAT 201 EN 1829-1:2021 High-pressure water jet machines - Safety requirements - Part 1: Machines CEN/TC 197 Seamless steel tubes for pressure purposes - Technical delivery conditions CEN/TC 459/ 628 MEAT 202 FprEN 10216-5 - Part 5: Stainless steel tubes SC 10 Welded steel tubes for pressure purposes - Technical delivery conditions - CEN/TC 459/ 629 MEAT 202 FprEN 10217-7 Part 7: Stainless steel tubes SC 10 Non-Alloy steel tubes suitable for welding, threading and other joining CEN/TC 459/ 630 MEAT 202 FprEN 10255:2017 methods - Requirements and test methods SC 10 Metallic tube connections for fluid power and general use - Test methods CEN/TC 459/ 631 MEAT 202 FprEN ISO 19879 for hydraulic fluid power connections (ISO/FDIS 19879:2020) SC 10 Mobile access and working towers made of prefabricated elements - Part 1: 632 MEAT 218 EN 1004-1:2020 CEN/TC 53 Materials, dimensions, design loads, safety and performance requirements 633 MEAT 218 EN 12609:2021 Truck mixers - Safety requirements CEN/TC 151 Paper, board, pulps and cellulosic nanomaterials - Determination of dry 634 MEAT 221 FprEN ISO 638-2 matter content by oven-drying method - Part 2: Suspensions of cellulosic CEN/TC 172 nanomaterials (ISO/FDIS 638-2:2021) Paper, board, pulps and cellulosic nanomaterials - Determination of dry 635 MEAT 221 FprEN ISO 638-1 matter content by oven-drying method - Part 1: Materials in solid form CEN/TC 172 (ISO/FDIS 638-1:2021) Tissue paper and tissue products - Part 17: Determination of disintegration 636 MEAT 221 FprEN ISO 12625-17 CEN/TC 172 in water (ISO/FDIS 12625-17:2020) Heating boilers - Part 5: Heating boilers for solid fuels, manually and 637 MEAT 225 EN 303-5:2021 automatically stoked, nominal heat output of up to 500 kW - Terminology, CEN/TC 57 requirements, testing and marking Independent closed-fronted gas-fired type B11, type C11, type C31 and type 638 MEAT 225 FprEN 613 CEN/TC 62 C91 heaters 639 MEAT 225 EN 12514:2020/AC:2021 Components for supply systems for consuming units with liquid fuels CEN/TC 47 640 MEAT 225 EN 13445-5:2014/FprA2 Unfired pressure vessels - Part 5: Inspection and testing CEN/TC 54 Unfired pressure vessels - Requirements for the design and fabrication of 641 MEAT 225 FprEN 15776 pressure vessels and pressure vessel parts constructed from cast iron with CEN/TC 54 an elongation after fracture equal or less than 15 % 642 MEAT 230 FprEN ISO 16672 Ophthalmic implants - Ocular endotamponades (ISO/FDIS 16672:2019) CEN/TC 170 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/ 643 MEAT 231 FprEN ISO 407 CEN/TC 23 FDIS 407:2021) Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, 644 MEAT 231 EN ISO 7866:2012/A1:2020 CEN/TC 23 construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020) LPG equipment and accessories - Welded steel pressure vessels for LPG 645 MEAT 231 EN 12493:2020 CEN/TC 286 road tankers - Design and manufacture LPG equipment and accessories - Automotive LPG filling system for light 646 MEAT 231 FprEN 13760 CEN/TC 286 and heavy duty vehicles - Nozzle, test requirements and dimensions

29 LPG equipment and accessories - Pressure relief valves for transportable 647 MEAT 231 EN 13953:2020 CEN/TC 286 refillable cylinders for Liquefied Petroleum Gas (LPG) Gas cylinders - Parallel threads for connection of valves to gas cylinders - 648 MEAT 231 FprEN ISO 15245-1 CEN/TC 23 Part 1: Specification (ISO/FDIS 15245-1:2021) Gas cylinders - Seamless steel and seamless aluminium-alloy gas cyl- 649 MEAT 231 EN ISO 18119:2018/FprA1 inders and tubes - Periodic inspection and testing - Amendment 1 (ISO CEN/TC 23 18119:2018/FDAM 1:2021) Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 650 MEAT 231 EN ISO 20475:2020 CEN/TC 23 20475:2018) Gas cylinders - Periodic inspection and testing of welded steel pressure 651 MEAT 231 EN ISO 23088:2020 CEN/TC 23 drums - Capacities up to 1 000 l (ISO 23088:2020) Fuel cell technologies - Part 3-400: Stationary fuel cell power systems - 652 MEAT 231 FprEN 62282-3-400:2016 Small stationary fuel cell power system with combined heat and power CEN/CLC/JTC 17 output Clothes washing machines for household use - Methods for measuring the 653 MEAT 238 EN 60456:2016/A11:2020 CLC/TC 59X performance Household electric direct-acting room heaters - Methods for measuring 654 MEAT 238 EN IEC 60675-2:2021 performance - Part 2: Additional provisions for the measurement of the CLC/TC 59X radiant factor Household electric direct-acting room heaters - Methods for measuring 655 MEAT 238 EN IEC 60675-3:2021 performance - Part 3: Additional provisions for the measurement of the CLC/TC 59X radiation efficiency Household and similar electrical appliances - Test code for the determina- 656 MEAT 238 EN IEC 60704-2-1:2020 tion of airborne acoustical noise - Part 2-1: Particular requirements for dry CLC/TC 59X vacuum cleaners Household and similar electrical appliances - Test code for the determi- 657 MEAT 238 EN IEC 60704-2-17:2020 nation of airborne acoustical noise - Part 2-17: Particular requirements for CLC/TC 59X dry-cleaning robots Household and similar electrical appliances - Test code for the determina- 658 MEAT 238 FprEN IEC 60704-1:2020 CLC/TC 59X tion of airborne acoustical noise - Part 1: General requirements 659 MEAT 238 EN 60730-1:2016/FprA2:2020 Automatic electrical controls - Part 1: General requirements CLC/TC 72 Automatic electrical controls - Part 2-5: Particular requirements for auto- 660 MEAT 238 EN 60730-2-5:2015/A2:2021 CLC/TC 72 matic electrical burner control systems Electric clothes washer-dryers for household use - Methods for measuring 661 MEAT 238 EN IEC 62512:2020 CLC/TC 59X the performance Electric clothes washer-dryers for household use - Methods for measuring 662 MEAT 238 EN IEC 62512:2020/A11:2020 CLC/TC 59X the performance Surface cleaning appliances - Part 7: Dry-cleaning robots for household or 663 MEAT 238 EN IEC/ASTM 62885-7:2021 CLC/TC 59X similar use - Methods for measuring the performance Household and similar electrical appliances - Safety - Part 2-38: Particular 664 MEAT 239 EN 60335-2-38:2003/FprA11:2016 CLC/TC 61 requirements for commercial electric griddles and griddle grills Household and similar electrical appliances - Safety - Part 2-53: Particular 665 MEAT 239 EN 60335-2-53:2011/FprA11:2016 CLC/TC 61 requirements for sauna heating appliances and infrared cabins Household and similar electrical appliances - Safety - Part 2-102: Particular 666 MEAT 239 FprEN 60335-2-102 requirements for gas, oil and solid-fuel burning appliances having electri- CLC/TC 61 cal connections Household and similar electrical appliances - Safety - Part 2-105: Particular 667 MEAT 239 FprEN 60335-2-105:2020 CLC/TC 61 requirements for multifunctional shower cabinets Household and similar electrical appliances - Safety - Part 2-64: Particular 668 MEAT 239 FprEN 60335-2-64:2015 CLC/TC 61 requirements for commercial electric kitchen machines Household and similar electrical appliances - Safety - Part 2-8: Particular 669 MEAT 239 EN 60335-2-8:2015/FprA12:2020 CLC/TC 61 requirements for shavers, hair clippers and similar appliances FprEN IEC 60335-2-75:2020/ Household and similar electrical appliances - Safety - Part 2-75: Particular 670 MEAT 239 CLC/TC 61 FprA1:2020 requirements for commercial dispensing appliances and vending machines FprEN IEC 60335-2-75:2020/ Household and similar electrical appliances - Safety - Part 2-75: Particular 671 MEAT 239 CLC/TC 61 FprA11:2020 requirements for commercial dispensing appliances and vending machines Household and similar electrical appliances - Safety - Part 2-2: Particular 672 MEAT 239 EN 60335-2-2:2010/FprA2 CLC/TC 61 requirements for vacuum cleaners and water-suction cleaning appliances Household and similar electrical appliances - Safety - Part 2-21: Particular 673 MEAT 239 EN 60335-2-21:2021 CLC/TC 61 requirements for storage water heaters Household and similar electrical appliances - Safety - Part 2-34: Particular 674 MEAT 239 EN 60335-2-34:2013/FprA2:2016 CLC/TC 61 requirements for motor-compressors Household and similar electrical appliances - Safety - Part 2-86: Particular 675 MEAT 239 FprEN 60335-2-86:2018 CLC/TC 61 requirements for electric fishing machines Household and similar electrical appliances - Safety - Part 2-110: Particu- 676 MEAT 239 EN 60335-2-110:2020 lar requirements for commercial microwave appliances with insertion or CLC/TC 61 contacting applicators Household and similar electrical appliances - Safety - Part 2-42: Particular 677 MEAT 239 EN 60335-2-42:2003/FprA2:2017 requirements for commercial electric forced convection ovens, steam CLC/TC 61 cookers and steam-convection ovens

30 Household and similar electrical appliances - Safety - Part 2-45: Particular 678 MEAT 239 EN 60335-2-45:2002/FprAA:2019 CLC/TC 61 requirements for portable heating tools and similar appliances Household and similar electrical appliances - Safety - Part 2-65: Particular 679 MEAT 239 EN 60335-2-65:2003/FprA2:2014 CLC/TC 61 requirements for air-cleaning appliances Household and similar electrical appliances - Safety - Part 2-8: Particular 680 MEAT 239 EN 60335-2-8:2015/FprA11:2020 CLC/TC 61 requirements for shavers, hair clippers and similar appliances Household and similar electrical appliances - Safety - Part 2-36: Particular 681 MEAT 239 FprEN 60335-2-36:2017 requirements for commercial electric cooking ranges, ovens, hobs and hob CLC/TC 61 elements Household and similar electrical appliances - Safety - Part 2-31: Particular 682 MEAT 239 EN 60335-2-31:2014/FprA1:2016 CLC/TC 61 requirements for range hoods and other cooking fume extractors Household and similar electrical appliances - Safety - Part 2-39: Particular 683 MEAT 239 FprEN 60335-2-39:2012 CLC/TC 61 requirements for commercial electric multi-purpose cooking pans Household and similar electrical appliances - Safety - Part 2-80: Particular 684 MEAT 239 FprEN 60335-2-80:2015 CLC/TC 61 requirements for fans Household and similar electrical appliances - Safety - Part 2-82: Particular 685 MEAT 239 prEN 60335-2-82:2016 CLC/TC 61 requirements for amusement machines and personal service machines Household and similar electrical appliances - Safety - Part 2-14: Particular 686 MEAT 239 EN 60335-2-14:2006/FprAD CLC/TC 61 requirements for kitchen machines Household and similar electrical appliances - Safety - Part 2-17: Particular 687 MEAT 239 EN 60335-2-17:2013/FprA2:2020 requirements for blankets, pads, clothing and similar flexible heating CLC/TC 61 appliances Household and similar electrical appliances - Safety - Part 2-34: Particular 688 MEAT 239 EN 60335-2-34:2013/FprA1:2015 CLC/TC 61 requirements for motor-compressors Household and similar electrical appliances - Safety - Part 2-50: Particular 689 MEAT 239 EN 60335-2-50:2003/FprA2:2017 CLC/TC 61 requirements for commercial electric bains-marie Household and similar electrical appliances - Safety - Part 2-53: Particular 690 MEAT 239 EN 60335-2-53:2011/FprA1:2016 CLC/TC 61 requirements for sauna heating appliances and infrared cabins Household and similar electrical appliances - Safety - Part 2-54: Particular 691 MEAT 239 EN 60335-2-54:2008/FprA12 requirements for surface-cleaning appliances for household use employing CLC/TC 61 liquids or steam Household and similar electrical appliances - Safety - Part 2-58: Particular 692 MEAT 239 FprEN 60335-2-58:2020 CLC/TC 61 requirements for commercial electric dishwashing machines Household and similar electrical appliances - Safety - Part 2-81: Particular 693 MEAT 239 FprEN 60335-2-81:2016 CLC/TC 61 requirements for foot warmers and heating mats FprEN IEC 60335-2-23:2019/ Household and similar electrical appliances - Safety - Part 2-23: Particular 694 MEAT 239 CLC/TC 61 FprA11:2019 requirements for appliances for skin or hair care Household and similar electrical appliances - Safety - Part 1: General 695 MEAT 239 EN 60335-1:2012/FprA15:2020 CLC/TC 61 requirements Household and similar electrical appliances - Safety - Part 2-14: Particular 696 MEAT 239 EN 60335-2-14:2006/A2:201X CLC/TC 61 requirements for kitchen machines Household and similar electrical appliances - Safety - Part 2-14: Particular 697 MEAT 239 EN 60335-2-14:2017 CLC/TC 61 requirements for kitchen machines Household and similar electrical appliances - Safety - Part 2-64: Particular 698 MEAT 239 EN 60335-2-64:2016/FprA2:2017 CLC/TC 61 requirements for commercial electric kitchen machines Household and similar electrical appliances - Safety - Part 2-65: Particular 699 MEAT 239 EN 60335-2-65:2003/FprA12:2020 CLC/TC 61 requirements for air-cleaning appliances Household and similar electrical appliances - Safety - Part 2-73: Particular 700 MEAT 239 EN 60335-2-73:2003/FprAA:2020 CLC/TC 61 requirements for fixed immersion heaters Household and similar appliances - Safety - Part 2-90: Particular require- 701 MEAT 239 EN 60335-2-90:2020 CLC/TC 61 ments for commercial microwave ovens Household and similar electrical appliances - Safety - Part 2-99: Particular 702 MEAT 239 EN 60335-2-99:2003/FprAA CLC/TC 61 requirements for commercial electric hoods Household and similar electrical appliances - Safety - Part 2-32: Particular 703 MEAT 239 EN IEC 60335-2-32:2021 CLC/TC 61 requirements for massage appliances Household and similar electrical appliances - Safety - Part 2-37: Particular 704 MEAT 239 FprEN 60335-2-37:2017 CLC/TC 61 requirements for commercial electric doughnut fryers and deep fat fryers Household and similar electrical appliances - Safety - Part 2-67: Particular 705 MEAT 239 EN 60335-2-67:2012/prA1 CLC/TC 61 requirements for floor treatment machines, for commercial use Household and similar electrical appliances - Safety - Part 2-8: Particular 706 MEAT 239 EN 60335-2-8:2015/FprA2:2020 CLC/TC 61 requirements for shavers, hair clippers and similar appliances Household and similar electrical appliances - Safety - Part 2-97: Particular 707 MEAT 239 FprEN 60335-2-97 requirements for drives for shutters, awnings, blinds and similar equip- CLC/TC 61 ment Household and similar electrical appliances - Safety - Part 2-23: Particular 708 MEAT 239 FprEN IEC 60335-2-23 CLC/TC 61 requirements for appliances for skin or hair care Household and similar electrical appliances - Safety - Part 2-75: Particular 709 MEAT 239 FprEN IEC 60335-2-75:2020 CLC/TC 61 requirements for commercial dispensing appliances and vending machines Natural esters - Guidelines for maintenance and use in electrical equip- 710 MEAT 264 FprEN IEC 62975:2020 CLC/SR 10 ment

31 Intermodal loading units and commercial vehicles - Transport stability of 711 MEAT 270 FprEN 17321 CEN/TC 119 packages - Minimum requirements and tests Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), myco- 712 MEAT 298 EN 12353:2021 CEN/TC 216 bactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity Surface active agents - Bio-based surfactants - Requirements and test 713 MEAT 298 FprEN 17035 CEN/TC 276 methods Chemical disinfectants and antiseptics - Quantitative test for the evalua- tion of bactericidal and yeasticidal and/or fungicidal activity of chemical 714 MEAT 298 EN 17387:2021 CEN/TC 216 disinfectants in the medical area on non-porous surfaces without mechani- cal action - Test method and requirements (phase 2, step 2) Domestic cooking appliances burning gas - Part 2-2: Rational use of energy 715 MEAT 305 FprEN 30-2-2 CEN/TC 49 - Appliances having forced-convection ovens and/or grills 716 MEAT 305 FprEN 203-1 Gas heated catering equipment - Part 1: General safety requirements CEN/TC 106 Gas heated catering equipment - Part 2-1: Specific requirements - Open 717 MEAT 305 FprEN 203-2-1 CEN/TC 106 burners and wok burners Pressure regulators, automatic change-over devices, having a maximum 718 MEAT 305 FprEN 16129 regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associ- CEN/TC 181 ated safety devices and adaptors for butane, propane, and their mixtures Specifications for dedicated liquefied petroleum gas appliances - LPG 719 MEAT 305 EN 17476:2021 vapour pressure appliances incorporating a horizontal cartridge in the CEN/TC 181 chassis Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating trans- 720 MEAT 312 FprEN IEC 61558-2-1:2021 CLC/SR 96 formers and power supplies incorporating separating transformers for general applications Determination of flash point - Pensky-Martens closed cup method - 721 MEAT 320 EN ISO 2719:2016/prA1 CEN/TC 19 Amendment 1: Thermometers correction (ISO 2719:2016/DAM 1:2020) Produits pétroliers et connexes - Fidélité des méthodes de mesure et de 722 MEAT 320 EN ISO 4259-1:2017/A2:2020 leurs résultats - Partie 1:Détermination des valeurs de fidélité relatives aux CEN/TC 19 méthodes d'essai AMENDEMENT 2 (ISO 4259-1:2017/Amd 2:2020) Determination of flash point - Abel closed-cup method (ISO/FDIS 723 MEAT 320 FprEN ISO 13736 CEN/TC 19 13736:2020) Petroleum products - Determination of boiling range distribution by gas 724 MEAT 320 EN 15199-1:2020 chromatography method - Part 1: Middle distillates and lubricating base CEN/TC 19 oils Petroleum products - Determination of boiling range distribution by gas 725 MEAT 320 EN 15199-2:2020 CEN/TC 19 chromatography method - Part 2: Heavy distillates and residual fuels Petroleum products - Determination of boiling range distribution by gas 726 MEAT 320 EN 15199-3:2020 CEN/TC 19 chromatography method - Part 3: Crude oil Fuels - Identification of vehicle compatibility - Graphical expression for 727 MEAT 320 EN 16942:2016+A1:2021 CEN/TC 441 consumer information Screed material and floor screeds - Screed material - Properties and 728 MEAT 324 FprEN 13813 CEN/TC 303 requirements Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 729 MEAT 324 EN 14904-3:2019 CEN/TC 217 3: In-situ testing Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 730 MEAT 324 EN 14904-2:2019 CEN/TC 217 2: Specifications Surfaces for sports areas - Multi-sports floor systems for indoor use - Part 731 MEAT 324 FprEN 14904-1 CEN/TC 217 1: Essential characteristics Electric vehicle conductive charging system - Part 25: DC EV supply equip- 732 MEAT 333 EN IEC 61851-25:2021 CLC/TC 69X ment where protection relies on electrical separation Electric vehicle conductive charging system - Part 21-2: Electric vehicle 733 MEAT 333 FprEN 61851-21-2:2017 requirements for conductive connection to an AC/DC supply - EMC require- CLC/TC 69X ments for off board electric vehicle charging systems Electric vehicle wireless power transfer (WPT) systems - Part 1: General 734 MEAT 333 EN IEC 61980-1:2021 CLC/TC 69X requirements Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory 735 MEAT 338 FprEN ISO 3219-1 CEN/TC 139 rheometry (ISO/FDIS 3219-1:2020) Rheology - Part 2: General principles of rotational and oscillatory rheome- 736 MEAT 338 FprEN ISO 3219-2 CEN/TC 139 try (ISO/FDIS 3219-2:2020) Extenders - Specifications and methods of test - Part 20: Fumed silica (ISO/ 737 MEAT 338 FprEN ISO 3262-20 CEN/TC 298 FDIS 3262-20:2020) Extenders - Specifications and methods of test - Part 19: Precipitated silica 738 MEAT 338 FprEN ISO 3262-19 CEN/TC 298 (ISO/FDIS 3262-19:2020) 739 MEAT 338 FprEN ISO 9038 Determination of sustained combustibility of liquids (ISO/FDIS 9038:2021) CEN/TC 139 Preparation of steel substrates before application of paints and related 740 MEAT 338 EN ISO 11127-1:2021 products - Test methods for non-metallic blast-cleaning abrasives - Part 1: CEN/TC 139 Sampling (ISO 11127-1:2020)

32 Preparation of steel substrates before application of paints and related 741 MEAT 338 EN ISO 11127-2:2021 products - Test methods for non-metallic blast-cleaning abrasives - Part 2: CEN/TC 139 Determination of particle size distribution (ISO 11127-2:2021) Preparation of steel substrates before application of paints and related 742 MEAT 338 EN ISO 11127-3:2021 products - Test methods for non-metallic blast-cleaning abrasives - Part 3: CEN/TC 139 Determination of apparent density (ISO 11127-3:2021) Preparation of steel substrates before application of paints and related 743 MEAT 338 EN ISO 11127-5:2021 products - Test methods for non-metallic blast-cleaning abrasives - Part 5: CEN/TC 139 Determination of moisture (ISO 11127-5:2020) Paints and varnishes - Coating of aluminium and aluminium alloys for 744 MEAT 338 EN 12206-1:2020 architectural purposes - Part 1: Coatings prepared from thermosetting CEN/TC 139 coating powder Paints and varnishes - Friction-reduction coatings for the interior of on- 745 MEAT 338 EN ISO 15741:2021 CEN/TC 139 and offshore steel pipelines for non-corrosive gases (ISO 15741:2016) Paints and varnishes - Methods of exposure to laboratory light sources - 746 MEAT 338 EN ISO 16474-3:2021 CEN/TC 139 Part 3: Fluorescent UV lamps (ISO 16474-3:2021) Glued-in rods in glued structural timber products - Testing, requirements 747 MEAT 338 EN 17334:2021 CEN/TC 193 and bond shear strength classification Two-component epoxy and polyurethane adhesives for on-site repair of 748 MEAT 338 EN 17418:2021 cracked timber structures - Testing, requirements and repair strength CEN/TC 193 verification Paints and varnishes - Determination of image clarity (degree of sharpness 749 MEAT 338 EN ISO 20266:2020 CEN/TC 139 of reflected or transmitted image) (ISO 20266:2018) Paints and varnishes - Determination of the scratch resistance of a coating 750 MEAT 338 EN ISO 20566:2021 CEN/TC 139 system using a laboratory-scale car-wash (ISO/DIS 20566:2019) 751 MEAT 338 EN ISO 21545:2020 Paints and varnishes - Determination of settling (ISO 21545:2018) CEN/TC 139 Paints and varnishes - Determination of the resistance to rubbing using a 752 MEAT 338 EN ISO 21546:2020 CEN/TC 139 linear abrasion tester (crockmeter) (ISO 21546:2019) Paints and varnishes - Practical determination of non-volatile and volatile 753 MEAT 338 EN ISO 22516:2020 CEN/TC 139 matter content during application (ISO 22516:2019) Paints and varnishes - Determination of solvents in water-thinnable coating 754 MEAT 338 EN ISO 22518:2020 CEN/TC 139 materials - Gas-chromatographic method (ISO 22518:2019) Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary (ISO 755 MEAT 338 EN ISO 22553-1:2020 CEN/TC 139 22553-1:2019) Paints and varnishes - Electro-deposition coatings - Part 2: Throwing power 756 MEAT 338 EN ISO 22553-2:2020 CEN/TC 139 (ISO 22553-2:2019) Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility 757 MEAT 338 EN ISO 22553-3:2020 of electro-deposition coating materials with a reference oil (ISO 22553- CEN/TC 139 3:2019) Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility 758 MEAT 338 EN ISO 22553-4:2020 of electro-deposition coating materials with liquid, paste-like and solid CEN/TC 139 foreign materials (ISO 22553-4:2019) Paints and varnishes - Electro-deposition coatings - Part 5: Determination 759 MEAT 338 EN ISO 22553-5:2020 CEN/TC 139 of sieve residue (ISO 22553-5:2019) Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks 760 MEAT 338 EN ISO 22553-6:2020 CEN/TC 139 (ISO 22553-6:2019) Paints and varnishes - Scratch test using a spring-loaded pen (ISO 761 MEAT 338 EN ISO 22557:2020 CEN/TC 139 22557:2019) Adhesives - Adhesives for floor coverings - Requirements for mechanical 762 MEAT 338 EN ISO 22636:2020 CEN/TC 193 and electrical performance (ISO 22636:2020) 763 MEAT 338 EN ISO 22969:2020 Paints and varnishes - Determination of solar reflectance (ISO 22969:2019) CEN/TC 139 Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear 764 MEAT 338 EN ISO 22970:2020 CEN/TC 139 strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019) Paints and varnishes - Determination of water content - Gas-chromato- 765 MEAT 338 EN ISO 23168:2020 CEN/TC 139 graphic method (ISO 23168:2019) Solvents for paints and varnishes - Demineralized water for industrial appli- 766 MEAT 338 EN ISO 23321:2020 CEN/TC 139 cations - Specification and test methods (ISO 23321:2019) Paints and varnishes - Evaluation of properties of coating systems related 767 MEAT 338 FprEN ISO 28199-1 to the spray application process - Part 1: Vocabulary and preparation of test CEN/TC 139 panels (ISO/FDIS 28199-1:2020) 768 MEAT 357 EN 437:2021 Test gases - Test pressures - Appliance categories CEN/TC 238 Installation and equipment for liquefied natural gas - Design of onshore 769 MEAT 357 EN 1473:2021 CEN/TC 282 installations Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar 770 MEAT 357 FprEN 15001-1 CEN/TC 234 for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

33 Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar 771 MEAT 357 FprEN 15001-2 CEN/TC 234 for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance Provision of services - Part 1: Service procurement - Guidance for the 772 MEAT 373 EN 17371-1:2020 assessment of the capacity of service providers and evaluation of service CEN/TC 447 proposals 773 MEAT 373 EN ISO 22259:2021 Conference systems - Equipment - Requirements (ISO 22259:2019) CEN/SS A07 Wearable electronic devices and technologies - Part 201-3: Electronic 774 MEAT 378 FprEN IEC 63203-201-3:2021 Textile - Determination of electrical resistance of conductive textiles under CLC/SR 124 simulated microclimate Wearable electronic devices and technologies - Part 204-1: Electronic 775 MEAT 378 FprEN IEC 63203-204-1:2021 textile - Test method for assessing washing durability of leisurewear and CLC/SR 124 sportswear e-textile systems Additive manufacturing - System performance and reliability - Acceptance 776 MEAT 390 EN ISO/ASTM 52941:2020 tests for laser metal powder-bed fusion machines for metallic materials for CEN/TC 438 aerospace application (ISO/ASTM 52941:2020) Additive manufacturing - General principles - Overview of data processing 777 MEAT 390 EN ISO/ASTM 52950:2021 CEN/TC 438 (ISO/ASTM 52950:2021) Chemicals used for treatment of water intended for human consumption - 778 MMAP 52 FprEN 1018 CEN/TC 164 Calcium carbonate 779 MMAP 52 FprEN 1488 Building valves - Expansion groups - Tests and requirements CEN/TC 164 Water quality - Carbon 14 - Test method using liquid scintillation counting 780 MMAP 52 FprEN ISO 13162 CEN/TC 230 (ISO/DIS 13162:2020) Water quality - Guidance for assessing the efficiency and related metrics of 781 MMAP 52 EN 17233:2021 CEN/TC 230 fish passage solutions using telemetry Water quality - Iron-55 - Test method using liquid scintillation counting 782 MMAP 52 FprEN ISO 22515 CEN/TC 230 (ISO/FDIS 22515:2021) Workplace exposure - Procedures for the determination of the concentra- 783 MMAP 53 EN 482:2021 CEN/TC 137 tion of chemical agents - Basic performance requirements Stationary source emissions - Reference method for the determination 784 MMAP 53 EN 16429:2021 of the concentration of gaseous hydrogen chloride (HCl) in waste gases CEN/TC 264 emitted by industrial installations into the atmosphere Characterization of bulk materials - Determination of a size-weighted fine 785 MMAP 53 EN 17289-1:2020 fraction and crystalline silica content - Part 1: General information and CEN/TC 137 choice of test methods Characterization of bulk materials - Determination of a size-weighted fine 786 MMAP 53 EN 17289-2:2020 CEN/TC 137 fraction and crystalline silica content - Part 2: Calculation method Characterization of bulk materials - Determination of a size-weighted fine 787 MMAP 53 EN 17289-3:2020 CEN/TC 137 fraction and crystalline silica content - Part 3: Sedimentation method Greenhouse gases - General principles and requirements for bodies vali- 788 MMAP 323 FprEN ISO 14065 CEN/SS S26 dating and verifying environmental information (ISO/FDIS 14065:2020) Adaptation to climate change - Guidelines on vulnerability, impacts and 789 MMAP 323 FprEN ISO 14091 CEN/SS S26 risk assessment (ISO/FDIS 14091:2020) Mechanical products - Methodology for reduction of environmental im- 790 MMAP 323 EN 16524:2020 CEN/TC 406 pacts in product design and development Mechanical products - Conditions to set up environmental communication 791 MMAP 323 CEN/TR 17004:2016 CEN/TC 406 models by recognizing sectorial particularities Refuse collection vehicles - General requirements and safety requirements 792 MMAP 360 EN 1501-2:2021 CEN/TC 183 - Part 2: Side loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety requirements 793 MMAP 360 EN 1501-1:2021 CEN/TC 183 - Part 1: Rear loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety requirements 794 MMAP 360 EN 1501-3:2021 CEN/TC 183 - Part 3: Front loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety requirements 795 MMAP 360 EN 1501-5:2021 CEN/TC 183 - Part 5: Lifting devices for refuse collection vehicles Soil, sludge and treated biowaste - Determination of pH (ISO/FDIS 796 MMAP 360 FprEN ISO 10390 CEN/TC 444 10390:2020) Soil and waste - Guidance on the selection and application of screening 797 MMAP 360 FprEN ISO 12404 CEN/TC 444 methods (ISO/FDIS 12404:2021) Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pel- 798 MMAP 360 FprEN ISO 17225-2 CEN/TC 335 lets (ISO/FDIS 17225-2:2020) Solid biofuels - Fuel specifications and classes - Part 1: General require- 799 MMAP 360 FprEN ISO 17225-1 CEN/TC 335 ments (ISO/DIS 17225-1:2020) Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips 800 MMAP 360 FprEN ISO 17225-4 CEN/TC 335 (ISO/FDIS 17225-4:2020) Solid biofuels - Fuel specifications and classes - Part 3: Graded wood 801 MMAP 360 FprEN ISO 17225-3 CEN/TC 335 briquettes (ISO/FDIS 17225-3:2020) 802 MMAP 360 EN ISO 21637:2020 Solid recovered fuels - Vocabulary (ISO 21637:2020) CEN/TC 343

34 803 MMAP 360 FprEN ISO 21640 Solid recovered fuels - Specifications and classes (ISO/FDIS 21640:2021) CEN/TC 343 Solid recovered fuels - Methods for the determination of biomass content 804 MMAP 360 EN ISO 21644:2021 CEN/TC 343 (ISO 21644:2021) 805 MMAP 360 FprEN ISO 21645 Solid recovered fuels - Methods for sampling (ISO/FDIS 21645:2020) CEN/TC 343 Solid recovered fuels - Determination of calorific value (ISO/FDIS 806 MMAP 360 FprEN ISO 21654 CEN/TC 343 21654:2020) Solid recovered fuels - Determination of ash content (ISO/FDIS 807 MMAP 360 FprEN ISO 21656 CEN/TC 343 21656:2020) Solid recovered fuels - Determination of moisture content using the oven 808 MMAP 360 FprEN ISO 21660-3 dry method - Part 3: Moisture in general analysis sample (ISO/FDIS 21660- CEN/TC 343 3:2020) Solid recovered fuels - Methods for the determination of carbon (C), 809 MMAP 360 EN ISO 21663:2020 hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method (ISO CEN/TC 343 21663:2020) Solid recovered fuels - Safe handling and storage of solid recovered fuels 810 MMAP 360 FprEN ISO 21912 CEN/TC 343 (ISO/FDIS 21912:2020) Solid recovered fuels - Determination of content of volatile matter (ISO/ 811 MMAP 360 FprEN ISO 22167 CEN/TC 343 FDIS 22167:2020) Solid biofuels - Determination of water sorption and its effect on durability 812 MMAP 360 FprEN ISO 23343-1 CEN/TC 335 of thermally treated biomass fuels - Part 1: Pellets (ISO/FDIS 23343-1:2021) Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble 813 MMAP 360 EN ISO 54321:2021 CEN/TC 444 fractions of elements (ISO 54321:2020) Determination of the spontaneous ignition behaviour of dust accumula- 814 MMPS 137 EN 15188:2020 CEN/TC 305 tions Gas detectors - Electrical apparatus for the detection of carbon monoxide 815 MMPS 137 EN 50291-1:2018/AC:2021-01 in domestic premises - Part 1: Test methods and performance require- CLC/TC 216 ments Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas 816 MMPS 137 EN IEC 60079-10-1:2021 CLC/TC 31 atmospheres Explosive atmospheres - Part 6: Equipment protection by liquid immersion 817 MMPS 137 EN 60079-6:2015/FprA1:2019 CLC/TC 31 "o" Explosive atmospheres - Part 26: Equipment with Separation Elements or 818 MMPS 137 FprEN IEC 60079-26:2020 CLC/TC 31 combined Levels of Protection Explosive atmospheres - Part 29-1: Gas detectors - Performance require- 819 MMPS 137 EN 60079-29-1:2016/FprA1:2019 CLC/TC 31 ments of detectors for flammable gases 820 MMPS 137 FprEN IEC 60079-25:2020 Explosive atmospheres - Part 25: Intrinsically safe electrical systems CLC/TC 31 Workplace atmospheres - Part 2: Gas detectors - Selection, installation, 821 MMPS 137 FprEN IEC 62990-2:2021 CLC/TC 31 use and maintenance of detectors for toxic gases and vapours Food processing machinery - Basic concepts - Part 2: Hygiene and 822 MMPS 148 EN 1672-2:2020 CEN/TC 153 cleanability requirements Food processing machinery - Rotary rack ovens - Safety and hygiene 823 MMPS 148 EN 1673:2020 CEN/TC 153 requirements Food processing machinery - Mincing machines - Safety and hygiene 824 MMPS 148 FprEN 12331 CEN/TC 153 requirements Food processing machinery - Filling machines and interchangeable equip- 825 MMPS 148 EN 12463:2021 CEN/TC 153 ment - Safety and hygiene requirements Pasta processing plant - Dryers and coolers - Safety and hygiene require- 826 MMPS 148 FprEN 13289 CEN/TC 153 ments 827 MMPS 148 FprEN 13378 Pasta processing plant - Pasta presses - Safety and hygiene requirements CEN/TC 153 Pasta processing plant - Spreader, stripping and cutting machine, stick 828 MMPS 148 FprEN 13379 CEN/TC 153 return conveyor - Safety and hygiene requirements Food processing machinery - Portion cutting machines - Safety and hygiene 829 MMPS 148 EN 13870:2015/FprA1:2021 CEN/TC 153 requirements 830 MMPS 176 FprEN 60903 Live working - Electrical insulating gloves CLC/TC 78 831 MMPS 176 EN 60984:2016 Live working - Electrical insulating sleeves CLC/TC 78 Live working - Minimum approach distances - Part 2: A method of determi- 832 MMPS 176 FprEN IEC 61472-2:2020 nation of the electrical component distance for AC systems 1,0 kV to 72,5 CLC/TC 78 kV Live working - Footwear for electrical protection - Part 1: Insulating foot- 833 MMPS 176 FprEN IEC 63247-1:2020 CLC/TC 78 wear and overboots Respiratory protective devices - Particle filters - Requirements, testing, 834 MMPS 227 EN 143:2021 CEN/TC 79 marking Respiratory protective devices - Powered filtering devices incorporating a 835 MMPS 227 FprEN 12941 CEN/TC 79 loose fitting respiratory interface - Requirements, testing, marking Respiratory protective devices - Powered filtering devices incorporating full 836 MMPS 227 FprEN 12942 CEN/TC 79 face masks, half masks or quarter masks - Requirements, testing, marking Protective clothing - General requirements - Amendment 1 (ISO 837 MMPS 227 EN ISO 13688:2013/FprA1 CEN/TC 162 13688:2013/FDAM 1:2020)

35 Respiratory protective devices - Gas filter(s) and combined filter(s) - Re- 838 MMPS 227 EN 14387:2021 CEN/TC 79 quirements, testing, marking Eye and face protection for occupational use - Part 2: Additional require- 839 MMPS 227 FprEN ISO 16321-2 ments for protectors used during welding and related techniques (ISO/FDIS CEN/TC 85 16321-2:2020) Eye and face protection for occupational use - Part 3: Additional require- 840 MMPS 227 FprEN ISO 16321-3 CEN/TC 85 ments for mesh protectors (ISO/FDIS 16321-3:2020) Eye and face protection for occupational use - Part 1: General requirements 841 MMPS 227 FprEN ISO 16321-1 CEN/TC 85 (ISO/FDIS 16321-1:2020) Eye and face protection for sports use - Part 2: Requirements for eye pro- 842 MMPS 227 FprEN ISO 18527-2 tectors for squash and eye protectors for racquetball and squash 57 (ISO/ CEN/TC 85 FDIS 18527-2:2020) Eye and face protection for sports use - Part 1: Requirements for downhill 843 MMPS 227 FprEN ISO 18527-1 CEN/TC 85 skiing and snowboarding goggles (ISO/FDIS 18527-1:2020) Eye and face protection - Guidance on selection, use and maintenance 844 MMPS 227 FprEN ISO 19734 CEN/TC 85 (ISO/FDIS 19734:2020) Protective clothing - Protection against chemicals - Measurement of cumu- lative permeation of chemicals with low vapour pressure through materials 845 MMPS 227 EN ISO 19918:2017/FprA1 CEN/TC 162 - Amendment 1: Extraction and chemical analysis (ISO 19918:2017/FDAM 1:2020) Electric motor-operated tools - Dust measurement procedure - Part 2-6: 846 MMPS 255 EN 50632-2-6:2015/A2:2020 CLC/TC 116 Particular requirements for hammers Safety of household and similar appliances - Part 2-107: Particular require- 847 MMPS 255 EN 50636-2-107:2015/FprA3 CLC/TC 116 ments for robotic battery powered electrical lawnmowers Electric motor-operated hand-held tools, transportable tools and lawn and 848 MMPS 255 FprEN IEC 62841-2-3:2020 garden machinery - Safety - Part 2-3: Particular requirements for hand-held CLC/TC 116 grinders, disc-type polishers and disc-type sanders Electric motor-operated hand-held tools, transportable tools and lawn and 849 MMPS 255 FprEN IEC 62841-3-7:2020/FprAA garden machinery - Safety - Part 3-7: Particular requirements for transport- CLC/TC 116 able wall saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn 850 MMPS 255 FprEN IEC 62841-4-4:2020 CLC/TC 116 trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws Electric motor-operated hand-held tools, transportable tools and lawn and 851 MMPS 255 EN 62841-3-1:2014/FprA1:2020 garden machinery - Safety - Part 3-1: Particular requirements for transport- CLC/TC 116 able table saws Electric motor-operated hand-held tools, transportable tools and lawn and 852 MMPS 255 FprEN IEC 62841-2-3:2020/FprAA garden machinery - Safety - Part 2-3: Particular requirements for hand-held CLC/TC 116 grinders, disc-type polishers and disc-type sanders Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn 853 MMPS 255 FprEN IEC 62841-4-4:2020/FprAA CLC/TC 116 trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws Electric motor-operated hand-held tools, transportable tools and lawn and 854 MMPS 255 EN 62841-3-1:2014/FprAA garden machinery - Safety - Part 3-1: Particular requirements for transport- CLC/TC 116 able table saws Electric motor-operated hand-held tools, transportable tools and lawn and 855 MMPS 255 FprEN IEC 62841-3-7:2020 garden machinery - Safety - Part 3-7: Particular requirements for transport- CLC/TC 116 able wall saws Electric motor-operated hand-held tools, transportable tools and lawn and 856 MMPS 255 FprEN IEC 62841-4-3:2020 garden machinery - Safety - Part 4-3: Particular requirements for pedestri- CLC/TC 116 an controlled walk-behind lawnmowers Electric motor-operated hand-held tools, transportable tools and lawn and 857 MMPS 255 FprEN IEC 62841-4-3:2020/FprAA garden machinery - Safety - Part 4-3: Particular requirements for pedestri- CLC/TC 116 an controlled walk-behind lawnmowers Acoustics - Measurement of airborne sound emitted by vessels on inland 858 MMPS 274 EN ISO 2922:2020 CEN/TC 211 waterways and harbours (ISO 2922:2020) Acoustics - Requirements for the performance and calibration of reference 859 MMPS 274 EN ISO 6926:2016/A1:2020 sound sources used for the determination of sound power levels - Amend- CEN/TC 211 ment 1 (ISO 6926:2016/Amd 1:2020) Human response to vibration - Measuring instrumentation - Part 2: Person- 860 MMPS 274 FprEN ISO 8041-2 CEN/TC 231 al vibration exposure meters (ISO/FDIS 8041-2:2021) Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified 861 MMPS 274 EN ISO 11202:2010/FprA1 CEN/TC 211 positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/FDAM 1:2020) Acoustics - Recommended practice for the design of low-noise workplaces 862 MMPS 274 EN ISO 11690-1:2020 CEN/TC 211 containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020) Acoustics - Recommended practice for the design of low-noise workplaces 863 MMPS 274 EN ISO 11690-2:2020 CEN/TC 211 containing machinery - Part 2: Noise control measures (ISO 11690-2:2020)

36 Acoustics - Measurement of insertion loss of ducted silencers without flow 864 MMPS 274 EN ISO 11691:2020 CEN/TC 211 - Laboratory survey method (ISO 11691:2020) 865 MMPS 274 EN 13819-1:2020 Hearing protectors - Testing - Part 1: Physical test methods CEN/TC 159 866 MMPS 274 EN 13819-2:2020 Hearing protectors - Testing - Part 2: Acoustic test methods CEN/TC 159 Hand-held portable power tools - Test methods for evaluation of vibration 867 MMPS 274 FprEN ISO 28927-13 CEN/TC 231 emission - Part 13: Fastener driving tools (ISO/FDIS 28927-13:2020) Medical electrical equipment - X-ray tube assemblies for medical diagnosis 868 MS 22 EN IEC 60336:2021 CLC/TC 62 - Focal spot dimensions and related characteristics Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of 869 MS 22 EN IEC 60522-1:2021 CLC/TC 62 quality equivalent filtration and permanent filtration Medical electrical equipment - Part 1: General requirements for basic 870 MS 22 EN 60601-1:2006/FprA2:2020 CLC/TC 62 safety and essential performance Medical electrical equipment - Part 2-21: Particular requirements for the 871 MS 22 FprEN IEC 60601-2-21:2020 CLC/TC 62 basic safety and essential performance of infant radiant warmers Medical electrical equipment - Part 2-65: Particular requirements for the 872 MS 22 EN 60601-2-65:2013/FprA2:2021 basic safety and essential performance of dental intra-oral X-ray equip- CLC/TC 62 ment Medical electrical equipment - Part 1-10: General requirements for basic 873 MS 22 EN 60601-1-10:2008/FprA2:2020 safety and essential performance - Collateral Standard: Requirements for CLC/TC 62 the development of physiologic closed-loop controllers Medical electrical equipment - Part 2-63: Particular requirements for the 874 MS 22 EN 60601-2-63:2015/FprA2:2021 basic safety and essential performance of dental extra-oral X-ray equip- CLC/TC 62 ment Medical electrical equipment - Part 2-50: Particular requirements for the 875 MS 22 FprEN IEC 60601-2-50:2020 CLC/TC 62 basic safety and essential performance of infant phototherapy equipment Medical electrical equipment - Part 1-2: General requirements for basic 876 MS 22 EN 60601-1-2:2015/A1:2021 safety and essential performance - Collateral Standard: Electromagnetic CLC/TC 62 disturbances - Requirements and tests Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for 877 MS 22 EN 60601-1-11:2015/FprA1:2020 CLC/TC 62 medical electrical equipment and medical electrical systems used in the home healthcare environment Medical electrical equipment - Part 2-1: Particular requirements for the 878 MS 22 FprEN IEC 60601-2-1:2020 basic safety and essential performance of electron accelerators in the CLC/TC 62 range 1 MeV to 50 MeV Medical electrical equipment - Part 1-6: General requirements for basic 879 MS 22 EN 60601-1-6:2010/FprA2:2020 CLC/TC 62 safety and essential performance - Collateral standard: Usability Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General require- 880 MS 22 EN 60601-1-8:2007/FprA2:2020 CLC/TC 62 ments, tests and guidance for alarm systems in medical electrical equip- ment and medical electrical systems Medical electrical equipment - Part 2-19: Particular requirements for the 881 MS 22 FprEN IEC 60601-2-19:2020 CLC/TC 62 basic safety and essential performance of infant incubators Medical electrical equipment - Dosimeters with ionization chambers as 882 MS 22 EN 60731:2012/FprA1:2016 CLC/TC 62 used in radiotherapy Dedicated radionuclide imaging devices - Characteristics and test condi- 883 MS 22 EN IEC 63073-1:2020 CLC/TC 62 tions - Part 1: Cardiac SPECT Safety, effectiveness and security in the implementation and use of con- 884 MS 22 FprEN IEC 80001-1:2021 nected medical devices or connected health software - Part 1: Application CLC/TC 62 of risk management Medical electrical equipment - Part 2-35: Particular requirements for the 885 MS 22 FprEN IEC 80601-2-35:2020 basic safety and essential performance of heating devices using blankets, CLC/TC 62 pads and mattresses and intended for heating in medical use Medical electrical equipment - Part 2-77: Particular requirements for the 886 MS 22 FprEN IEC 80601-2-77:2019 basic safety and essential performance of robotically assisted surgical CLC/TC 62 equipment Basic standard for the in-situ assessment of exposure to radio frequency 887 MS 279 FprEN 50554 CLC/TC 106X electromagnetic fields in the vicinity of a broadcast site 888 MS 377 EN 285:2015/FprA1 Sterilization - Steam sterilizers - Large sterilizers CEN/TC 102 889 MS 377 EN ISO 1942:2020 Dentistry - Vocabulary (ISO 1942:2020) CEN/TC 55 Dentistry - Endodontic instruments - Part 3: Compactors (ISO/FDIS 3630- 890 MS 377 FprEN ISO 3630-3 CEN/TC 55 3:2021) Cardiovascular implants - Cardiac valve prostheses - Part 1: General re- 891 MS 377 EN ISO 5840-1:2021 CEN/TC 285 quirements (ISO 5840-1:2021) Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically 892 MS 377 EN ISO 5840-2:2021 CEN/TC 285 implanted heart valve substitutes (ISO 5840-2:2021) Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve 893 MS 377 EN ISO 5840-3:2021 CEN/TC 285 substitutes implanted by transcatheter techniques (ISO 5840-3:2021)

37 Infusion equipment for medical use - Part 12: Check valves for single use 894 MS 377 EN ISO 8536-12:2021 CEN/TC 205 (ISO 8536-12:2021) 895 MS 377 FprEN ISO 10873 Dentistry - Denture adhesives (ISO/FDIS 10873:2021) CEN/TC 55 Biological evaluation of medical devices - Part 1: Evaluation and testing 896 MS 377 EN ISO 10993-1:2020 within a risk management process (ISO 10993-1:2018, including corrected CEN/TC 206 version 2018-11) Biological evaluation of medical devices - Part 9: Framework for identi- 897 MS 377 FprEN ISO 10993-9 fication and quantification of potential degradation products (ISO/FDIS CEN/TC 206 10993-9:2019) Biological evaluation of medical devices - Part 7: Ethylene oxide steriliza- 898 MS 377 EN ISO 10993-7:2008/FprA1 CEN/TC 206 tion residuals - Amendment 1 (ISO 10993-7/FDAM 1:2019) Biological evaluation of medical devices - Part 12: Sample preparation and 899 MS 377 FprEN ISO 10993-12 CEN/TC 206 reference materials (ISO/FDIS 10993-12:2020) Biological evaluation of medical devices - Part 15: Identification and 900 MS 377 FprEN ISO 10993-15 quantification of degradation products from metals and alloys (ISO/FDIS CEN/TC 206 10993-15:2019) Biological evaluation of medical devices - Part 23: Tests for irritation (ISO/ 901 MS 377 FprEN ISO 10993-23 CEN/TC 206 FDIS 10993-23:2020) Assistive products for walking manipulated by both arms - Requirements 902 MS 377 FprEN ISO 11199-1 CEN/TC 293 and test methods - Part 1: Walking frames (ISO/FDIS 11199-1:2021) Sterilization of health care products - Microbiological methods - Part 1: De- 903 MS 377 EN ISO 11737-1:2018/FprA1 termination of a population of microorganisms on products - Amendment 1 CEN/TC 204 (ISO 11737-1:2018/FDAM 1:2020) Aseptic processing of health care products - Part 6: Isolator systems (ISO/ 904 MS 377 FprEN ISO 13408-6 CEN/TC 204 FDIS 13408-6:2020) Medical devices - Quality management systems - Requirements for regula- 905 MS 377 EN ISO 13485:2016/FprA1 CEN/CLC/JTC 3 tory purposes (ISO 13485:2016) Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - 906 MS 377 prEN ISO 14160 CEN/TC 204 Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2018) 907 MS 377 EN 14222:2021 Stainless steel steam boilers CEN/TC 102 Implants for surgery - Active implantable medical devices - Part 2: Cardiac 908 MS 377 FprEN ISO 14708-2 CEN/CLC/JTC 16 pacemakers (ISO/FDIS 14708-2:2019) Implants for surgery - Active implantable medical devices - Part 3: Implant- 909 MS 377 FprEN ISO 14708-3 CEN/CLC/JTC 16 able neurostimulators (ISO/FDIS 14708-3:2016) Implants for surgery - Active implantable medical devices - Part 5: Circula- 910 MS 377 FprEN ISO 14708-5 CEN/CLC/JTC 16 tory support devices (ISO/FDIS 14708-5:2020) Implants for surgery - Active implantable medical devices - Part 6: Partic- ular requirements for active implantable medical devices intended to treat 911 MS 377 FprEN ISO 14708-6 CEN/CLC/JTC 16 tachyarrhythmia (including implantable defibrillators) (ISO/FDIS 14708- 6:2019) Implants for surgery - Active implantable medical devices - Part 7: Partic- 912 MS 377 FprEN ISO 14708-7 ular requirements for cochlear and auditory brainstem implant systems CEN/CLC/JTC 16 (ISO/FDIS 14708-7:2019) Medical devices - Symbols to be used with medical device labels, labelling 913 MS 377 EN ISO 15223-1:2016/FprA1 and information to be supplied - Part 1: General requirements (ISO 15223- CEN/CLC/JTC 3 1:2016, including corrected version 2017-03) Dentistry - Wires for use in orthodontics - Amendment 1 (ISO 15841:2014/ 914 MS 377 EN ISO 15841:2014/A1:2020 CEN/TC 55 Amd 1:2020) 915 MS 377 EN ISO 15854:2021 Dentistry - Casting and baseplate waxes (ISO 15854:2021) CEN/TC 55 Washer disinfectors - Part 5: Performance requirements and test method 916 MS 377 FprEN ISO 15883-5 CEN/TC 102 criteria for demonstrating cleaning efficacy (ISO/FDIS 15883-5:2020) Instruments for use in association with non-active surgical implants - Gen- 917 MS 377 FprEN ISO 16061 CEN/TC 285 eral requirements (ISO/FDIS 16061:2020) Method for analysis of allergens - Quantification of an extended list of 57 918 MS 377 EN 16274:2021 suspected allergens in ready to inject fragrance materials by gas chroma- CEN/TC 347 tography mass spectrometry Patient involvement in health care - Minimum requirements for per- 919 MS 377 EN 17398:2020 CEN/TC 450 son-centred care In vitro diagnostic medical devices - Requirements for establishing me- 920 MS 377 FprEN ISO 17511 trological traceability of values assigned to calibrators, trueness control CEN/TC 140 materials and human samples (ISO/FDIS 17511:2019) Molecular in vitro diagnostic examinations - Specifications for preexam- 921 MS 377 FprEN ISO 20166-4 ination processes for formalin-fixed and paraffin-embedded (FFPE) tissue CEN/TC 140 - Part 4: In situ detection techniques (ISO/FDIS 20166-4:2021) Molecular in vitro diagnostic examinations - Specifications for pre-ex- 922 MS 377 FprEN ISO 20184-3 amination processes for frozen tissue - Part 3: Isolated DNA (ISO/FDIS CEN/TC 140 20184-3:2021)

38 Medical devices - Information to be supplied by the manufacturer (ISO/ 923 MS 377 FprEN ISO 20417 CEN/CLC/JTC 3 FDIS 20417:2020) Dentistry - Vocabulary and designation system for forensic oro-dental data 924 MS 377 EN ISO 20888:2020 CEN/TC 55 (ISO 20888:2020) Transfer sets for pharmaceutical preparations - Requirements and test 925 MS 377 FprEN ISO 22413 CEN/TC 205 methods (ISO/DIS 22413:2020) Medical devices utilizing animal tissues and their derivatives - Part 1: Appli- 926 MS 377 EN ISO 22442-1:2020 CEN/TC 206 cation of risk management (ISO 22442-1:2020) Medical devices utilizing animal tissues and their derivatives - Part 2: Con- 927 MS 377 EN ISO 22442-2:2020 CEN/TC 206 trols on sourcing, collection and handling (ISO 22442-2:2020) Dentistry - Colour tabs for intraoral tooth colour determination (ISO 928 MS 377 EN ISO 22598:2020 CEN/TC 55 22598:2020) Molecular in vitro diagnostic examinations - Specifications for pre-ex- 929 MS 377 FprEN ISO 23118 amination processes in metabolomics in urine, venous blood serum and CEN/TC 140 plasma (ISO/FDIS 23118:2021) 930 MS 377 FprEN ISO 23445 Dentistry - Tissue punches (ISO/FDIS 23445:2021) CEN/TC 55 931 MS 377 FprEN ISO 23450 Dentistry - Intraoral camera (ISO/FDIS 23450:2020) CEN/TC 55 932 MS 377 FprEN ISO 23940 Dentistry - Excavators (ISO/FDIS 23940:2020) CEN/TC 55 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents 933 MS 377 EN ISO 25539-2:2020 CEN/TC 285 (ISO 25539-2:2020) Medical electrical equipment - Part 2-67: Particular requirements for basic 934 MS 377 EN ISO 80601-2-67:2020 safety and essential performance of oxygen-conserving equipment (ISO CEN/TC 215 80601-2-67:2020) Medical electrical equipment - Part 2-69: Particular requirements for the 935 MS 377 EN ISO 80601-2-69:2020 basic safety and essential performance of oxygen concentrator equipment CEN/TC 215 (ISO 80601-2-69:2020) Medical electrical equipment - Part 2-70: Particular requirements for the 936 MS 377 EN ISO 80601-2-70:2020 basic safety and essential performance of sleep apnoea breathing therapy CEN/TC 215 equipment (ISO 80601-2-70:2020) Medical electrical equipment - Part 2-85: Particular requirements for the 937 MS 377 FprEN ISO 80601-2-85 basic safety and essential performance of cerebral tissue oximeter equip- CEN/TC 215 ment (ISO/FDIS 80601-2-85:2020) Medical electrical equipment - Part 2-87: Particular requirements for basic 938 MS 377 FprEN ISO 80601-2-87 safety and essential performance of high-frequency ventilators (ISO/FDIS CEN/TC 215 80601-2-87:2021) Railway applications - Fixed installations - Electrical protective measures 939 MTI 4 EN 50488:2021 for working on or near an overhead contact line system and/or its associat- CLC/TC 9X ed return circuit Railway applications - Rolling stock - Conductor rail current collectors 940 MTI 4 FprEN 50702 CLC/TC 9X (shoegear): Characteristics and tests Aerospace series - Cadmium plating of steels with specified tensile 941 MTI 72 EN 2133:2020 ASD-STAN/D 4 strength = 1 450 MPa, copper, copper alloys and nickel alloys Aerospace series - Heat resisting nickel base alloy Ni-Cr20Co3Fe3 - Rp 0,2 942 MTI 72 FprEN 2302 ASD-STAN/D 4 = 310 MPa - Sheets and strips 0,25 mm < a = 3 mm Aerospace series - Bearing, spherical, plain in corrosion resisting steel with 943 MTI 72 FprEN 2755 self-lubricating liner - Elevated load at ambient temperature - Technical ASD-STAN/D 3 specification Aerospace series - Screws, pan head, offset cruciform recess, coarse toler- 944 MTI 72 FprEN 2885 ance normal shank, short thread, in alloy steel, cadmium plated - Classifi- ASD-STAN/D 3 cation : 900 MPa (at ambient temperature) / 235 °C Aerospace series - Screws, pan head, offset cruciform recess, close toler- 945 MTI 72 FprEN 2886 ance normal shank, short thread, in alloy steel, cadmium plated - Classifi- ASD-STAN/D 3 cation: 900 MPa (at ambient temperature)/235 °C Aerospace series - PTFE flexible hose assembly with convoluted inner 946 MTI 72 EN 3572:2021 tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium - ASD-STAN/D 3 Product standard Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Soft- 947 MTI 72 EN 3639:2021 ened and cold worked - Wires for forged fasteners - D = 15 mm - 900 MPa ASD-STAN/D 4 = Rm = 1 100 MPa Aerospace series - Anaerobic polymerisable compounds — Technical 948 MTI 72 FprEN 3792 ASD-STAN/D 4 specification Aerospace series - Metallic materials - Filler metal for welding - Technical 949 MTI 72 FprEN 3879 ASD-STAN/D 4 specification Aerospace series - Rod end, adjustable, with self-aligning double row ball 950 MTI 72 EN 4035:2021 bearing, in corrosion resisting steel, reduced internal radial clearance and ASD-STAN/D 3 threaded shank in titanium alloy - Dimensions and loads Aerospace series - Rod end, adjustable, with self-aligning double row ball 951 MTI 72 EN 4036:2021 bearing and threaded shank, in corrosion resisting steel, reduced internal ASD-STAN/D 3 radial clearance - Dimensions and loads 952 MTI 72 FprEN 4259:2019 Aerospace series - Metallic materials - Definition of general terms ASD-STAN/D 4

39 Aerospace series - Metallic materials - Rules for drafting and presentation 953 MTI 72 EN 4260:2020 ASD-STAN/D 4 of technical specifications Aerospace series - Metallic materials - Rules for drafting and presentation 954 MTI 72 EN 4261:2020 ASD-STAN/D 4 of test method standards Aerospace series - Non-metallic materials - General organization of stan- 955 MTI 72 EN 4385:2020 ASD-STAN/D 4 dardization - Links between types of standards Aerospace series - Non-metallic materials - Rules for drafting and presen- 956 MTI 72 EN 4387:2020 ASD-STAN/D 4 tation of technical specifications Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15N1) -Vacuum 957 MTI 72 FprEN 4566 ASD-STAN/D 4 melted - Solution treated - Forgings - De = 100 mm Aerospace series - Spherical plain bearing in corrosion resisting steel with 958 MTI 72 FprEN 4613 ASD-STAN/D 3 self-lubricating liner, narrow series - Dimensions and loads - Inch series Aerospace series - Spherical plain bearing in corrosion resisting steel with 959 MTI 72 FprEN 4614 ASD-STAN/D 3 self-lubricating liner, wide series - Dimensions and loads - Inch series Aerospace series - Paints and varnishes - Chromate free (non corrosion 960 MTI 72 EN 4687:2021 inhibiting) two-components room temperature curing primer - Chromate ASD-STAN/D 4 free primer for military application Aerospace series - Paints and varnishes - Corrosion resistant chromated 961 MTI 72 EN 4688:2021 two-components room temperature curing epoxy primer - High corrosion ASD-STAN/D 4 resistance for military application Aerospace series - Paints and varnishes - Two-components room tem- 962 MTI 72 EN 4689:2021 perature curing polyurethane finish - High flexibility and chemical agent ASD-STAN/D 4 resistance for military application Aerospace series - Steel and heat resisting alloys - Wrought products - 963 MTI 72 FprEN 4700-002 ASD-STAN/D 4 Technical specification - Part 002: Bar and section Aerospace series - Steel X12CrNiMoV12-3 (1.4938) - Air melted and consum- 964 MTI 72 FprEN 4825 able electrode remelted - Hardened and tempered - Bars - De = 150 mm ASD-STAN/D 4 - 900 MPa = Rm = 1 100 MPa 965 MTI 72 FprEN 4841-2 Aerospace series - Shock mount with bushes - Part 2: Technical overview ASD-STAN/D 3 Aerospace series - Shock mount with bushes - Part 1: Technical specifica- 966 MTI 72 FprEN 4841-1 ASD-STAN/D 3 tion Aerospace series - Metrological assessment procedure for kinematic fields 967 MTI 72 EN 4861:2020 ASD-STAN/D 4 measured by digital image correlation Aerospace series - Environmental testing - High dynamic abrasion, mar, 968 MTI 72 EN 4864:2020 ASD-STAN/D 4 scratch and punch test in cabin interior Aerospace series - Definitions of imperfections and defects in organic 969 MTI 72 FprEN 4866 ASD-STAN/D 4 matrix composite materials Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flat- 970 MTI 72 EN 6025:2021 ASD-STAN/D 4 ness - Thickness - 6 mm = a = 55 mm - Dimensions Aerospace series - Non-metallic materials - Test method - Analysis of ther- 971 MTI 72 FprEN 6040 ASD-STAN/D 4 moset systems by High Performance Liquid Chromatography (HPLC) Aerospace series - Rod-end, spherical, plain bearing, metal to metal - 972 MTI 72 EN 6099:2021 ASD-STAN/D 3 Technical specification Aerospace series - LOTAR - Part 125: Explicit CAD assembly structure with 973 MTI 72 FprEN 9300-125:2019 ASD-STAN/D 7 Graphic Product and Manufacturing Information (PMI) Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 974 MTI 72 FprEN 9300-120:2019 ASD-STAN/D 7 120: CAD 3D explicit geometry with graphic product and manufacturing information Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 121: 975 MTI 72 FprEN 9300-121:2019 ASD-STAN/D 7 Semantic representation of CAD 3D Explicit Geometry with Product and Manufacturing Information Aircraft ground support equipment - Specific requirements - Part 7: Air- 976 MTI 72 EN 12312-7:2020 CEN/TC 274 craft movement equipment Aircraft ground support equipment - Specific requirements - Part 5: Air- 977 MTI 72 EN 12312-5:2021 CEN/TC 274 craft fuelling equipment Space product assurance - Adhesive bonding for spacecraft and launcher 978 MTI 72 FprEN 16602-70-16 CEN/CLC/JTC 5 applications 979 MTI 72 FprEN 16602-70-15 Space product assurance - Non-destructive testing CEN/CLC/JTC 5 Public-address-general-emergency-alarm-system, communication-system 980 MTI 143 FprEN 50695:2021 CLC/BTTF 157-1 for marine applications Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Part 2: Modular structure for INS 981 MTI 143 FprEN IEC 61924-2:2020 CLC/SR 80 - Operational and performance requirements, methods of testing and required test results Maritime navigation and radiocommunication equipment and systems – Cy- 982 MTI 143 FprEN IEC 63154:2020 bersecurity – General requirements, methods of testing and required test CLC/SR 80 results

40 983 MTI 146 EN 12082:2017/FprA1 Railway applications - Axleboxes - Performance testing CEN/TC 256 Railway applications - Track - Acceptance of works - Part 2: Acceptance of 984 MTI 146 EN 13231-2:2020 CEN/TC 256 reprofiling rails in plain line, switches, crossings and expansion devices Railway applications - Wheelsets and bogies - Method of specifying the 985 MTI 146 EN 13749:2021 CEN/TC 256 structural requirements of bogie frames Railway applications - Track - Track geometry quality - Part 2: Measuring 986 MTI 146 EN 13848-2:2020 CEN/TC 256 systems - Track recording vehicles Railway applications - Track - Track geometry quality - Part 6: Characterisa- 987 MTI 146 EN 13848-6:2014+A1:2020 CEN/TC 256 tion of track geometry quality Railway applications - Braking - Requirements for the brake system of 988 MTI 146 EN 14198:2016+A1:2018/FprA2 CEN/TC 256 trains hauled by locomotives Railway applications - Track - Aluminothermic welding of rails - Part 2: 989 MTI 146 EN 14730-2:2021 Qualification of aluminothermic welders, approval of contractors and CEN/TC 256 acceptance of welds 990 MTI 146 EN 15595:2018/AC:2021 Railway applications - Braking - Wheel slide protection CEN/TC 256 991 MTI 146 EN 15624:2021 Railway applications - Braking - Empty-loaded changeover devices CEN/TC 256 992 MTI 146 EN 15625:2021 Railway applications - Braking - Automatic variable load sensing devices CEN/TC 256 Railway applications - Track - Road-rail machines and associated equip- 993 MTI 146 EN 15746-2:2020 CEN/TC 256 ment - Part 2: General safety requirements Railway applications - Track - Road-rail machines and associated equip- 994 MTI 146 EN 15746-3:2020 CEN/TC 256 ment - Part 3: Technical requirements for running Railway applications - Track - Road-rail machines and associated equip- 995 MTI 146 EN 15746-1:2020 CEN/TC 256 ment - Part 1: Technical requirements for travelling and working Railway applications - Track - Road-rail machines and associated equip- 996 MTI 146 EN 15746-4:2020 ment - Part 4: Technical requirements for running, travelling and working CEN/TC 256 on urban rail 997 MTI 146 EN 15807:2021 Railway applications - Pneumatic half couplings CEN/TC 256 998 MTI 146 EN 17343:2020 Railway applications - General terms and definitions CEN/TC 256 999 MTI 146 EN 17397-1:2020 Railway applications - Rail defects - Part 1: Rail defect management CEN/TC 256 1000 MTI 199 FprEN ISO 7840 Small craft - Fire-resistant fuel hoses (ISO/FDIS 7840:2020) CEN/TC 464 Small craft - Waste systems - Part 2: Sewage treatment systems (ISO/FDIS 1001 MTI 199 EN ISO 8099-2:2021 CEN/SS T01 8099-2:2020) 1002 MTI 199 FprEN ISO 8469 Small craft - Non-fire-resistant fuel hoses (ISO/FDIS 8469:2020) CEN/TC 464 1003 MTI 199 FprEN ISO 8847 Small craft - Steering gear - Cable over pulley systems (ISO/DIS 8847:2019) CEN/TC 464 1004 MTI 199 EN ISO 8848:2021 Small craft - Remote mechanical steering systems (ISO/FDIS 8848:2020) CEN/SS T01 1005 MTI 199 FprEN ISO 8849 Small craft - Electrically operated bilge pumps (ISO/FDIS 8849:2020) CEN/SS T01 1006 MTI 199 EN ISO 9093:2021 Small craft - Seacocks and through-hull fittings (ISO 9093:2020) CEN/TC 464 1007 MTI 199 FprEN ISO 10592 Small craft - Remote hydraulic steering systems (ISO/FDIS 10592:2021) CEN/TC 464 Small craft - Watertight or quick-draining recesses and cockpits (ISO/FDIS 1008 MTI 199 FprEN ISO 11812 CEN/SS T01 11812:2019) Small craft - Hull construction and scantlings - Part 10: Rig loads and rig 1009 MTI 199 EN ISO 12215-10:2020 CEN/SS T01 attachment in sailing craft (ISO 12215-10:2020) Small craft - Hull construction and scantlings - Part 7: Determination of 1010 MTI 199 EN ISO 12215-7:2020 loads for multihulls and of their local scantlings using ISO 12215-5 (ISO CEN/SS T01 12215-7:2020) Small craft - Windows, portlights, hatches, deadlights and doors - Strength 1011 MTI 199 FprEN ISO 12216 CEN/SS T01 and watertightness requirements (ISO/FDIS 12216:2019) Small craft - Electrical systems - Alternating and direct current installa- 1012 MTI 199 EN ISO 13297:2021 CEN/SS T01 tions (ISO/FDIS 13297:2020) 1013 MTI 199 FprEN ISO 14945 Small craft - Builder's plate (ISO/FDIS 14945:2019) CEN/SS T01 1014 MTI 199 FprEN ISO 14946 Small craft - Maximum load capacity (ISO/FDIS 14946:2020) CEN/SS T01 Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electri- 1015 MTI 199 EN ISO 16147:2021 CEN/TC 464 cal components (ISO 16147:2020) 1016 MTI 199 EN ISO 23411:2021 Small craft - Steering wheels (ISO 23411:2020) CEN/SS T01 1017 MTI 303 FprEN 2349-001 Aerospace series - Requirements and test procedures for switching devices ASD-STAN/D 2 Aerospace series - Cables, electrical for general purpose - Operating tem- 1018 MTI 303 FprEN 2854-003 ASD-STAN/D 2 peratures between -55 °C and 260 °C - Part 003: Product standard Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 1019 MTI 303 FprEN 2997-002 ASD-STAN/D 2 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specifica- tion of performance and contact arrangements Aerospace series - Terminal lugs and in-line splices for crimping on electric 1020 MTI 303 FprEN 3373-001 ASD-STAN/D 2 conductors - Part 001: Technical specification

41 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: 1021 MTI 303 EN 3475-512:2021 ASD-STAN/D 2 Flexure endurance Aerospace series - Cable outlet accessories for circular and rectangular 1022 MTI 303 FprEN 3660-062 electrical and optical connectors - Part 062: Cable outlet, style K, 90°, for ASD-STAN/D 2 heat shrinkable boot, shielded, sealed, self-locking - Product standard Aerospace series - Cable outlet accessories for circular and rectangular 1023 MTI 303 FprEN 3660-065 electrical and optical connectors - Part 065: Cable outlet, style K, 90°, for ASD-STAN/D 2 heat shrinkable boot, shielded, sealed, self-locking - Product standard Aerospace series - Cable outlet accessories for circular and rectangular 1024 MTI 303 FprEN 3660-063 electrical and optical connectors - Part 063: Cable outlet, style K, straight, ASD-STAN/D 2 for heat shrinkable boot, shielded, sealed, self-locking - Product standard Aerospace series - Cable outlet accessories for circular and rectangular 1025 MTI 303 FprEN 3660-064 electrical and optical connectors - Part 064: Cable outlet, style K, straight, ASD-STAN/D 2 for heat shrinkable boot, shielded, sealed, self-locking - Product standard 1026 MTI 303 FprEN 3830:2019 Aerospace series - Electrical system - Load analysis ASD-STAN/D 2 Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: 1027 MTI 303 FprEN 4641-301 Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - ASD-STAN/D 2 Product standard Aerospace series - Electrical cables, installation - Protection sleeve in me- ta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, 1028 MTI 303 FprEN 6049-009 ASD-STAN/D 2 post-installation, operating temperature from -55 °C to 260 °C - Product standard Electronic fee collection - Evaluation of on-board and roadside equipment 1029 MTI 345 EN ISO 13143-1:2020 for conformity to ISO 12813 - Part 1: Test suite structure and test purposes CEN/TC 278 (ISO 13143-1:2020) Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 3: Location referencing for Radio Data 1030 MTI 345 EN ISO 14819-3:2021 CEN/TC 278 System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO 14819- 3:2021) Intelligent transport systems - Traffic and travel information messages via 1031 MTI 345 prEN ISO 14819-1 traffic message coding - Part 1: Coding protocol for Radio Data System - CEN/TC 278 Traffic Message Channel (RDS-TMC) using ALERT-C (ISO/DIS 14819-1:2019) Intelligent transport systems - Traffic and travel information messages via traffic message coding - Part 2: Event and information codes for Radio 1032 MTI 345 prEN ISO 14819-2 CEN/TC 278 Data System - Traffic Message Channel (RDS-TMC) using ALERT-C (ISO/DIS 14819-2:2019) Electronic fee collection - Test procedures for user and fixed equipment - 1033 MTI 345 prEN ISO 14907-2 Part 2: Conformance test for the on-board unit application interface (ISO/ CEN/TC 278 DIS 14907-2:2020) Intelligent transport systems - DATEX II data exchange specifications for 1034 MTI 345 EN 16157-4:2021 CEN/TC 278 traffic management and information - Part 4: VMS publication Public transport - Interoperable fare management system - Part 1: Archi- 1035 MTI 345 EN ISO 24014-1:2021 CEN/TC 278 tecture (ISO 24014-1:2021)

42 SECȚIUNEA 2

Standarde europene armonizate propuse a se adopta ca standarde române prin publicarea versiunii române

Directiva/ Nr crt Minister CT Indicativ EN Titlu TC Regulament

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: 1 MEAT 37 EN 60831-1:2014 CLC/SR 33 2014/35/EU General - Performance, testing and rating - Safety requirements - Guide for installation and operation Shunt power capacitors of the self-healing type for a.c. systems 2 MEAT 37 EN 60831-2:2014 having a rated voltage up to and including 1 000 V - Part 2: CLC/SR 33 2014/35/EU Ageing test, self-healing test and destruction test 3 MEAT 39 EN IEC 60974-2:2019 Arc welding equipment - Part 2: Liquid cooling systems CLC/TC 26 2014/35/EU Arc welding equipment - Part 3: Arc striking and stabilizing 4 MEAT 39 EN IEC 60974-3:2019 CLC/TC 26 2014/35/EU devices 5 MEAT 39 EN IEC 60974-5:2019 Arc welding equipment - Part 5: Wire feeders CLC/TC 26 2014/35/EU 6 MEAT 39 EN IEC 60974-7:2019 Arc welding equipment - Part 7: Torches CLC/TC 26 2014/35/EU Stationary training equipment - Part 6: Treadmills, additional 7 MEAT 66 EN 957-6:2010+A1:2014 CEN/TC 136 2001/95/EC specific safety requirements and test methods Gymnastic equipment - Trampolines - Functional and safety 8 MEAT 66 EN 13219:2008 CEN/TC 136 2001/95/EC requirements, test methods Stationary training equipment - Part 1: General safety require- 9 MEAT 66 EN ISO 20957-1:2013 CEN/TC 136 2001/95/EC ments and test methods (ISO 20957-1:2013) Stationary training equipment - Part 9: Elliptical trainers, 10 MEAT 66 EN ISO 20957-9:2016 additional specific safety requirements and test methods (ISO CEN/TC 136 2001/95/EC 20957-9:2016) Floating leisure articles for use on and in the water - Part 1: 11 MEAT 66 EN ISO 25649-1:2017 Classification, materials, general requirements and test methods CEN/TC 136 2001/95/EC (ISO 25649-1:2017) Floating leisure articles for use on and in the water - Part 2: 12 MEAT 66 EN ISO 25649-2:2017 CEN/TC 136 2001/95/EC Consumer information (ISO 25649-2:2017) Floating leisure articles for use on and in the water - Part 3: Ad- 13 MEAT 66 EN ISO 25649-3:2017 ditional specific safety requirements and test methods for Class CEN/TC 136 2001/95/EC A devices (ISO 25649-3:2017) Floating leisure articles for use on and in the water - Part 4: Ad- 14 MEAT 66 EN ISO 25649-4:2017 ditional specific safety requirements and test methods for Class CEN/TC 136 2001/95/EC B devices (ISO 25649-4:2017) Floating leisure articles for use on and in the water - Part 6: Ad- 15 MEAT 66 EN ISO 25649-6:2017 ditional specific safety requirements and test methods for Class CEN/TC 136 2001/95/EC D devices (ISO 25649-6:2017) Cycles - Safety requirements for bicycles - Part 1: Terms and 16 MEAT 78 EN ISO 4210-1:2014 CEN/TC 333 2001/95/EC definitions (ISO 4210-1:2014) Cycles - Safety requirements for bicycles - Part 2: Requirements 17 MEAT 78 EN ISO 4210-2:2015 for city and trekking, young adult, mountain and racing bicycles CEN/TC 333 2001/95/EC (ISO 4210-2:2015) Cycles - Safety requirements for bicycles - Part 3: Common test 18 MEAT 78 EN ISO 4210-3:2014 CEN/TC 333 2001/95/EC methods (ISO 4210-3:2014) Cycles - Safety requirements for bicycles - Part 4: Braking test 19 MEAT 78 EN ISO 4210-4:2014 CEN/TC 333 2001/95/EC methods (ISO 4210-4:2014) Cycles - Safety requirements for bicycles - Part 5: Steering test 20 MEAT 78 EN ISO 4210-5:2014 CEN/TC 333 2001/95/EC methods (ISO 4210-5:2014, Corrected version 2015-02-01) Cycles - Safety requirements for bicycles - Part 6: Frame and fork 21 MEAT 78 EN ISO 4210-6:2015 CEN/TC 333 2001/95/EC test methods (ISO 4210-6:2015) Cycles - Safety requirements for bicycles - Part 7: Wheels and 22 MEAT 78 EN ISO 4210-7:2014 CEN/TC 333 2001/95/EC rims test methods (ISO 4210-7:2014) Cycles - Safety requirements for bicycles - Part 8: Pedal and drive 23 MEAT 78 EN ISO 4210-8:2014 CEN/TC 333 2001/95/EC system test methods (ISO 4210-8:2014) Cycles - Safety requirements for bicycles - Part 9: Saddles and 24 MEAT 78 EN ISO 4210-9:2014 CEN/TC 333 2001/95/EC seat-post test methods (ISO 4210-9:2014) Cycles - Luggage carriers for bicycles - Requirements and test 25 MEAT 78 EN ISO 11243:2016 CEN/TC 333 2001/95/EC methods (ISO 11243:2016)

43 Safety requirements for cableway installations designed to trans- 26 MEAT 85 EN 1709:2019 port persons - Precommissioning inspection and instructions for CEN/TC 242 2016/424 maintenance and operational inspection and checks Safety requirements for cableway installations designed to carry 27 MEAT 85 EN 1909:2017 CEN/TC 242 2016/424 persons - Recovery and evacuation Safety requirements for cableway installations designed to carry 28 MEAT 85 EN 12927:2019 CEN/TC 242 2016/424 persons - Ropes Safety requirements for cableway installations designed to carry 29 MEAT 85 EN 17064:2018 CEN/TC 242 2016/424 persons - Prevention and fight against fire Safety devices for protection against excessive pressure - Part 1: 30 MEAT 89 EN ISO 4126-1:2013/A2:2019 CEN/TC 69 2014/68/EU Safety valves (ISO 4126-1:2013) Cryogenic vessels - Toughness requirements for materials at 31 MEAT 147 EN ISO 21028-1:2016 cryogenic temperature - Part 1: Temperatures below -80 °C (ISO CEN/TC 268 2014/68/EU 21028-1:2016) Cryogenic vessels - Toughness requirements for materials at 32 MEAT 147 EN ISO 21028-2:2018 cryogenic temperature - Part 2: Temperatures between -80 CEN/TC 268 2014/68/EU degrees C and -20 degrees C (ISO 21028-2:2018) Test on gases evolved during combustion of materials from 33 MEAT 159 EN 60754-1:2014 CLC/TC 20 2006/95/EC cables - Part 1: Determination of the halogen acid gas content Test on gases evolved during combustion of materials from 34 MEAT 159 EN 60754-2:2014 cables - Part 2: Determination of acidity (by pH measurement) CLC/TC 20 2006/95/EC and conductivity 35 MEAT 169 EN 13480-2:2017/A2:2018 Metallic industrial piping - Part 2: Materials CEN/TC 267 2014/68/EU 36 MEAT 169 EN 13480-2:2017/A3:2018 Metallic industrial piping - Part 2: Materials CEN/TC 267 2014/68/EU 37 MEAT 169 EN 13480-5:2017/A1:2019 Metallic industrial piping - Part 5: Inspection and testing CEN/TC 267 2014/68/EU 38 MEAT 225 EN 13445-2:2014/A3:2018 Unfired pressure vessels - Part 2: Materials CEN/TC 54 2014/68/EU 39 MEAT 225 EN 13445-5:2014/A1:2018 Unfired pressure vessels - Part 5: Inspection and testing CEN/TC 54 2014/68/EU Unfired pressure vessels - Part 6: Requirements for the design 40 MEAT 225 EN 13445-6:2014/A2:2018 and fabrication of pressure vessels and pressure parts construct- CEN/TC 54 2014/68/EU ed from spheroidal graphite cast iron LPG Equipment and accessories - Pressure relief valves for LPG 41 MEAT 231 EN 14129:2014 CEN/TC 286 2014/68/EU pressure vessels LPG equipment and accessories - Equipping of overground and 42 MEAT 231 EN 14570:2014 CEN/TC 286 2014/68/EU underground LPG vessels Household and similar electrical appliances - Safety - Part 2-35: 43 MEAT 239 EN 60335-2-35:2016/A1:2019 CLC/TC 61 2014/35/EU Particular requirements for instantaneous water heaters Household and similar electrical appliances - Safety - Part 2-4: 44 MEAT 239 EN 60335-2-4:2010/A2:2019 CLC/TC 61 2014/35/EU Particular requirements for spin extractors EN 60335-2-47:2003/ Household and similar electrical appliances - Safety - Part 2-47: 45 MEAT 239 CLC/TC 61 2014/35/EU A2:2019 Particular requirements for commercial electric boiling pans Household and similar electrical appliances - Safety - Part 2-48: EN 60335-2-48:2003/ 46 MEAT 239 Particular requirements for commercial electric grillers and CLC/TC 61 2014/35/EU A2:2019 toasters Household and similar electrical appliances - Safety - Part 2-49: EN 60335-2-49:2003/ 47 MEAT 239 Particular requirements for commercial electric appliances for CLC/TC 61 2014/35/EU A2:2019 keeping food and crockery warm Household and similar electrical appliances - Safety - Part 2-5: 48 MEAT 239 EN 60335-2-5:2015/A11:2019 CLC/TC 61 2014/35/EU Particular requirements for dishwashers EN 60335-2-52:2003/ Household and similar electrical appliances - Safety - Part 2-52: 49 MEAT 239 CLC/TC 61 2014/35/EU A12:2019 Particular requirements for oral hygiene appliances Domestic cooking appliances burning gas - Part 2-1: Rational use 50 MEAT 305 EN 30-2-1:2015 CEN/TC 49 66/2014 of energy - General Internal blinds - Protection from strangulation hazards - Test 51 MEAT 318 EN 16433:2014 CEN/TC 33 2001/95/EC methods Internal blinds - Protection from strangulation hazards - Require- 52 MEAT 318 EN 16434:2014 CEN/TC 33 2001/95/EC ments and test methods for safety devices 53 MEAT 357 EN 334:2019 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar) CEN/TC 235 2014/68/EU Gas safety shut-off devices for inlet pressure up to 10 MPa (100 54 MEAT 357 EN 14382:2019 CEN/TC 235 2014/68/EU bar) Safety of machinery - Requirements for cableless control sys- 55 MMPS 23 EN 62745:2017/A11:2020 CLC/TC 44X 2006/42/EC tems of machinery Mountaineering equipment - Crampons - Safety requirements 56 MMPS 66 EN 893:2019 CEN/TC 136 2016/425 and test methods Mountaineering equipment - Energy absorbing systems for use 57 MMPS 66 EN 958:2017 in klettersteig (via ferrata) climbing - Safety requirements and CEN/TC 136 2016/425 test methods Mountaineering equipment - Individual safety systems for rope 58 MMPS 66 EN 17109:2020 CEN/TC 136 2016/425 courses - Safety requirements and test methods

44 Aircraft ground support equipment - Specific requirements - Part 59 MMPS 72 EN 12312-12:2017 CEN/TC 274 2006/42/EC 12: Potable water service equipment Aircraft ground support equipment - Specific requirements - Part 60 MMPS 72 EN 12312-13:2017 CEN/TC 274 2006/42/EC 13: Lavatory service equipment Agricultural machinery - Safety - Part 11: Pick-up balers - Amend- 61 MMPS 77 EN ISO 4254-11:2010/A1:2020 CEN/TC 144 2006/42/EC ment 1 (ISO 4254-11:2010/Amd 1:2020) Agricultural machinery - Safety - Part 12: Rotary disc and drum 62 MMPS 77 EN ISO 4254-12:2012/A1:2017 CEN/TC 144 2006/42/EC mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017) Machinery for forestry - Portable chain-saw safety requirements 63 MMPS 77 EN ISO 11681-2:2011/A1:2017 and testing - Part 2: Chain-saws for tree service (ISO 11681- CEN/TC 144 2006/42/EC 2:2011/Amd 1:2017) EN 13683:2003+A2:2011/ Garden equipment - Integrally powered shredders/chippers - 64 MMPS 77 CEN/TC 144 2006/42/EC AC:2013 Safety Underground mining machines - Mobile extracting machines at 65 MMPS 84 EN ISO 19225:2017/A1:2019 the face - Safety requirements for shearer loaders and plough CEN/TC 196 2006/42/EC systems - Amendment 1 (ISO 19225:2017/Amd 1:2019) Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, 66 MMPS 85 EN ISO 3691-1:2015/A1:2020 CEN/TC 150 2006/42/EC variable-reach trucks and burden-carrier trucks - Amendment 1 (ISO 3691-1:2011/Amd 1:2020) Industrial trucks - Safety requirements and verification - Part 5: 67 MMPS 85 EN ISO 3691-5:2015/A1:2020 Pedestrian-propelled trucks - Amendment 1 (ISO 3691-5:2014/ CEN/TC 150 2006/42/EC Amd 1:2020) Woodworking machines - Safety - Part 10: Building site saws EN ISO 19085-10:2019/ 68 MMPS 118 (contractor saws) (ISO 19085-10:2018, including Corrected CEN/TC 142 2006/42/EC A11:2020 version 2019-12) Safety of machinery - Safety requirements for the design and 69 MMPS 154 EN 1034-8:2012 construction of paper making and finishing machines - Part 8: CEN/TC 198 2006/42/EC Refining plants Textile machinery - Noise test code - Part 1: Common require- 70 MMPS 154 EN ISO 9902-1:2001/A2:2014 CEN/TC 214 2006/42/EC ments - Amendment 2 (ISO 9902-1:2001/Amd 2:2014) Textile machinery - Noise test code - Part 2: Spinning preparatory 71 MMPS 154 EN ISO 9902-2:2001/A2:2014 and spinning machinery - Amendment 2 (ISO 9902-2:2001/Amd CEN/TC 214 2006/42/EC 2:2014) Textile machinery - Noise test code - Part 3: Nonwoven machinery 72 MMPS 154 EN ISO 9902-3:2001/A2:2014 CEN/TC 214 2006/42/EC - Amendment 2 (ISO 9902-3:2001/Amd 2:2014) High-pressure water jet machines - Safety requirements - Part 2: 73 MMPS 201 EN 1829-2:2008 CEN/TC 197 2006/42/EC Hoses, hose lines and connectors Liquid pumps and pumps units - Noise test code - Grades 2 and 3 74 MMPS 201 EN ISO 20361:2019/A11:2020 CEN/TC 197 2006/42/EC of accuracy (ISO 20361:2019) Drilling and foundation equipment - Safety - Part 4: Foundation 75 MMPS 218 EN 16228-4:2014 CEN/TC 151 2006/42/EC equipment Drilling and foundation equipment - Safety - Part 5: Diaphragm 76 MMPS 218 EN 16228-5:2014 CEN/TC 151 2006/42/EC walling equipment Drilling and foundation equipment - Safety - Part 6: Jetting, 77 MMPS 218 EN 16228-6:2014 CEN/TC 151 2006/42/EC grouting and injection equipment Safety of machinery - Minimum gaps to avoid crushing of parts of 78 MMPS 223 EN ISO 13854:2019 CEN/TC 114 2006/42/EC the human body (ISO 13854:2017) Specification for protective clothing for use where there is a risk 79 MMPS 227 EN 510:2019 CEN/TC 162 2016/425 of entanglement with moving parts Protective clothing - Performance requirements for protec- tive clothing worn by operators applying pesticides and for 80 MMPS 227 EN ISO 27065:2017/A1:2019 CEN/TC 162 2016/425 re-entry workers - Amendment 1: Surrogate test chemical (ISO 27065:2017/Amd 1:2019) Safety of household and similar appliances - Part 2-107: EN 50636-2-107:2015/ 81 MMPS 255 Particular requirements for robotic battery powered electrical CLC/TC 116 2006/42/EC A2:2020 lawnmowers Hand-held motor-operated electric tools - Safety - Part 2-3: 82 MMPS 255 EN 60745-2-3:2011/A13:2015 Particular requirements for grinders, polishers and disk-type CLC/TC 116 2006/42/EC sanders Hand-held motor-operated electric tools - Safety - Part 2-3: 83 MMPS 255 EN 60745-2-3:2011/A2:2013 Particular requirements for grinders, polishers and disk-type CLC/TC 116 2006/42/EC sanders Electric motor-operated hand-held tools, transportable tools 84 MMPS 255 EN 62841-3-4:2016/A1:2020 and lawn and garden machinery - Safety - Part 3-4: Particular CLC/TC 116 2006/42/EC requirements for transportable bench grinders Electric motor-operated hand-held tools, transportable tools 85 MMPS 255 EN 62841-3-4:2016/A12:2020 and lawn and garden machinery - Safety - Part 3-4: Particular CLC/TC 116 2006/42/EC requirements for transportable bench grinders

45 Electric motor-operated hand-held tools, transportable tools EN IEC 62841-3-9:2020/ 86 MMPS 255 and lawn and garden machinery - Safety - Part 3-9: Particular CLC/TC 116 2006/42/EC A11:2020 requirements for transportable mitre saws Acoustics - Noise emitted by machinery and equipment - Deter- mination of emission sound pressure levels at a work station and 87 MMPS 274 EN ISO 11203:2009/A1:2020 CEN/TC 211 2006/42/EC at other specified positions from the sound power level - Amend- ment 1 (ISO 11203:1995/Amd 1:2020) Hand-held portable power tools - Test methods for evaluation of EN ISO 28927-4:2010/ 88 MMPS 274 vibration emission - Part 4: Straight grinders (ISO 28927-4:2010/ CEN/TC 231 2006/42/EC A1:2018 Amd 1:2017) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines EN ISO 28927-8:2009/ 89 MMPS 274 with reciprocating action and small saws with oscillating or ro- CEN/TC 231 2006/42/EC A2:2019 tating action - Amendment 2: Oscillating knives (vibrating screen removal tools) (ISO 28927-8:2009/Amd 2:2019) External blinds and awnings - Performance requirements includ- 90 MMPS 318 EN 13561:2015/AC:2016 CEN/TC 33 2006/42/EC ing safety Power operated pedestrian doorsets - Safety in use - Require- 91 MMPS 318 EN 16005:2012/AC:2015 CEN/TC 33 2006/42/EC ments and test methods 92 MS 377 EN 1789:2020 Medical vehicles and their equipment - Road ambulances CEN/TC 239 93/42/EEC Needle-based injection systems for medical use - Requirements 93 MS 377 EN ISO 11608-5:2012 and test methods - Part 5: Automated functions (ISO 11608- CEN/TC 205 93/42/EEC 5:2012) Clinical investigation of medical devices for human subjects - 94 MS 377 EN ISO 14155:2020 CEN/TC 206 93/42/EEC Good clinical practice (ISO 14155:2020) Aerosol drug delivery device design verification - Requirements 95 MS 377 EN ISO 20072:2013 CEN/TC 205 93/42/EEC and test methods (ISO 20072:2009) Railway applications - Track - Concrete sleepers and bearers - 96 MTI 146 EN 13230-2:2016 CEN/TC 256 2008/57/EC Part 2: Prestressed monoblock sleepers Railway applications - Track - Concrete sleepers and bearers - 97 MTI 146 EN 13230-3:2016 CEN/TC 256 2008/57/EC Part 3: Twin-block reinforced sleepers Railway applications - Track - Track geometry quality - Part 5: 98 MTI 146 EN 13848-5:2017 CEN/TC 256 2008/57/EC Geometric quality levels - Plain line, switches and crossings Railway applications - Methods for calculation of stopping and 99 MTI 146 EN 14531-2:2015 slowing distances and immobilization braking - Part 2: Step by CEN/TC 256 2008/57/EC step calculations for train sets or single vehicles Railway applications - Brake discs for railway rolling stock - Part 100 MTI 146 EN 14535-3:2015 3: Brake discs, performance of the disc and the friction couple, CEN/TC 256 2008/57/EC classification 101 MTI 146 EN 15220:2016 Railway applications - Brake indicators CEN/TC 256 2008/57/EC Railway applications - Design for PRM use - General require- 102 MTI 146 EN 16584-3:2017 CEN/TC 256 2008/57/EC ments - Part 3: Optical and friction characteristics Railway applications - Design for PRM use - Equipment and com- 103 MTI 146 EN 16585-3:2017 ponents on board rolling stock - Part 3: Clearways and internal CEN/TC 256 2008/57/EC doors Railway applications - Design for PRM use - Accessibility of 104 MTI 146 EN 16586-1:2017 persons with reduced mobility to rolling stock - Part 1: Steps for CEN/TC 256 2008/57/EC access and egress Railway applications - Design for PRM use - Accessibility of per- 105 MTI 146 EN 16586-2:2017 CEN/TC 256 2008/57/EC sons with reduced mobility to rolling stock - Part 2: Boarding aids Railway applications - Design for PRM Use - Requirements on 106 MTI 146 EN 16587:2017 CEN/TC 256 2008/57/EC obstacle free routes for infrastructure Railway applications - Call for aid and communication device - 107 MTI 146 EN 16683:2015 CEN/TC 256 2008/57/EC Requirements Railway applications - Infrastructure - Non-destructive testing on 108 MTI 146 EN 16729-1:2016 rails in track - Part 1: Requirements for ultrasonic inspection and CEN/TC 256 2008/57/EC evaluation principles Railway applications - Infrastructure - Non-destructive testing on 109 MTI 146 EN 16729-4:2018 rails in track - Part 4: Qualification of personnel for non-destruc- CEN/TC 256 2008/57/EC tive testing on rails Railway applications - Ground based services - Vehicle waste 110 MTI 146 EN 16922:2017+A1:2019 CEN/TC 256 2008/57/EC water discharge equipment Small craft - Electrical devices - Protection against ignition of 111 MTI 199 EN ISO 8846:2017 CEN/SS T01 2013/53/EU surrounding flammable gases (ISO 8846:1990) Small craft - Craft identification - Coding system (ISO 112 MTI 199 EN ISO 10087:2019 CEN/SS T01 2013/53/EU 10087:2019) Small craft - Liquefied petroleum gas (LPG) systems (ISO 113 MTI 199 EN ISO 10239:2017 CEN/SS T01 2013/53/EU 10239:2014)

46 Small craft - Determination of maximum propulsion power rating 114 MTI 199 EN ISO 11592-1:2016 using manoeuvring speed - Part 1: Craft with a length of hull less CEN/SS T01 2013/53/EU than 8 m (ISO 11592-1:2016) Small craft - Liquid-fuelled galley stoves and heating appliances 115 MTI 199 EN ISO 14895:2016 CEN/SS T01 2013/53/EU (ISO 14895:2016) Small craft - Electric navigation lights - Performance of LED 116 MTI 199 EN ISO 19009:2015 CEN/SS T01 2013/53/EU lights (ISO 19009:2015) Marking of electrical equipment with ratings related to electrical 117 UE 2 EN IEC 61293:2020 CLC/SR 3 2014/35/EU supply - Safety requirements 118 UE 3 EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels CLC/TC 14 548/2014 Railway applications - Communication, signalling and processing 119 UE 4 EN 50128:2011/A1:2020 CLC/TC 9X 2016/797/EU systems - Software for railway control and protection systems Railway applications - Communication, signalling and processing 120 UE 4 EN 50128:2011/A2:2020 CLC/TC 9X 2016/797/EU systems - Software for railway control and protection systems Railway applications - Rolling stock - Protective provisions relat- 121 UE 4 EN 50153:2014/A2:2020 CLC/TC 9X 2008/57/EC ing to electrical hazards 122 UE 4 EN 50163:2004/A2:2020 Railway applications - Supply voltages of traction systems CLC/TC 9X 2016/797/EU Railway applications - Rolling Stock - Three-phase shore (exter- 123 UE 4 EN 50546:2020 CLC/TC 9X 2016/797/EU nal) supply system for rail vehicles and its connectors Railway applications - Requirements for running capability in 124 UE 4 EN 50553:2012/A2:2020 CLC/TC 9X 2016/797/EU case of fire on board of rolling stock Railway applications - Fixed installations - Requirements for 125 UE 4 EN 50641:2020 the validation of simulation tools used for the design of electric CLC/TC 9X 2016/797/EU traction power supply systems Instrument transformers - Part 4: Additional requirements for 126 UE 8 EN 61869-4:2014 CLC/TC 38 2014/35/EU combined transformers Low-voltage switchgear and controlgear - Controller-device inter- 127 UE 9 EN 62026-2:2013/A1:2019 CLC/TC 121A 2014/30/EU faces (CDIs) - Part 2: Actuator sensor interface (AS-i) Low-voltage switchgear and controlgear - Controller-device inter- 128 UE 9 EN 62026-3:2015/A11:2020 CLC/TC 121A 2014/30/EU faces (CDIs) - Part 3: DeviceNet Residual current operated circuit-breakers without integral over- 129 UE 11 EN 61008-1:2012/A1:2014 current protection for household and similar uses (RCCBs) - Part CLC/TC 23E 2014/35/EU 1: General rules Residual current operated circuit-breakers without integral over- 130 UE 11 EN 61008-1:2012/A12:2017 current protection for household and similar uses (RCCBs) - Part CLC/TC 23E 2014/35/EU 1: General rules Residual current operated circuit-breakers without integral over- 131 UE 11 EN 61008-1:2012/A2:2014 current protection for household and similar uses (RCCBs) - Part CLC/TC 23E 2014/35/EU 1: General rules Residual current operated circuit-breakers with integral overcur- 132 UE 11 EN 61009-1:2012/A11:2015 rent protection for household and similar uses (RCBOs) - Part 1: CLC/TC 23E 2014/35/EU General rules Residual current operated circuit-breakers with integral overcur- 133 UE 11 EN 61009-1:2012/A12:2016 rent protection for household and similar uses (RCBOs) - Part 1: CLC/TC 23E 2006/95/EC General rules Residual current operated circuit-breakers with integral overcur- 134 UE 11 EN 61009-1:2012/A2:2014 rent protection for household and similar uses (RCBOs) - Part 1: CLC/TC 23E 2014/35/EU General rules In-cable control and protection device for mode 2 charging of 135 UE 11 EN 62752:2016/A1:2020 CLC/TC 23E 2014/35/EU electric road vehicles (IC-CPD) 136 UE 12 EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links CLC/SR 32C 2014/35/EU 137 UE 12 EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links CLC/SR 32C 2014/35/EU Miniature fuses - Part 7: Miniature fuse-links for special appli- 138 UE 12 EN 60127-7:2016 CLC/SR 32C 2014/35/EU cations 139 UE 12 EN 60691:2016 Thermal-links - Requirements and application guide CLC/SR 32C 2014/35/EU 140 UE 12 EN 60691:2016/A1:2019 Thermal-links - Requirements and application guide CLC/SR 32C 2014/35/EU Medical electrical equipment - Part 1-6: General requirements 141 UE 22 EN 60601-1-6:2010 for basic safety and essential performance - Collateral standard: CLC/TC 62 93/42/EEC Usability Medical electrical equipment - Part 2-44: Particular requirements 142 UE 22 EN 60601-2-44:2009 for the basic safety and essential performance of X-ray equip- CLC/TC 62 93/42/EEC ment for computed tomography Medical electrical equipment - Characteristics of digital X-ray im- 143 UE 22 EN 62220-1-3:2008 aging devices - Part 1-3: Determination of the detective quantum CLC/TC 62 93/42/EEC efficiency - Detectors used in dynamic imaging Safety requirements for electrical equipment for measurement, 144 UE 24 EN IEC 61010-2-010:2020 control and laboratory use - Part 2-010: Particular requirements CLC/TC 66X 2014/35/EU for laboratory equipment for the heating of materials

47 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements 145 UE 24 EN IEC 61010-2-081:2020 CLC/TC 66X 2014/35/EU for automatic and semi-automatic laboratory equipment for analysis and other purposes Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to 146 UE 30 EN 61000-3-12:2011 CLC/TC 210 2014/30/EU public low-voltage systems with input current > 16 A and <= 75 A per phase Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limita- tion of voltage changes, voltage fluctuations and flicker in public 147 UE 30 EN 61000-3-3:2013 CLC/TC 210 1999/5/EC low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection Electromagnetic compatibility (EMC) - Part 6-4: Generic stan- 148 UE 30 EN IEC 61000-6-4:2019 CLC/TC 210 2014/30/EU dards - Emission standard for industrial environments Agricultural and forestry machinery - Pedestrian controlled 149 UE 77 EN 12733:2018 CEN/TC 144 2006/42/EC motor mowers - Safety 150 UE 77 EN 13525:2020 Forestry machinery - Wood chippers - Safety CEN/TC 144 2006/42/EC Agricultural and forestry machinery - Inspection of sprayers in 151 UE 77 EN ISO 16122-3:2015 CEN/TC 144 2009/128/EC use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015) Safety rules for the construction and installation of lifts - Partic- 152 UE 85 EN 81-73:2020 ular applications for passenger and goods passenger lifts - Part CEN/TC 10 2014/33/EU 73: Behaviour of lifts in the event of fire Safety devices for protection against excessive pressure - Part 2: 153 UE 89 EN ISO 4126-2:2019 CEN/TC 69 2014/68/EU Bursting disc safety devices (ISO 4126-2:2018) Safety devices for protection against excessive pressure - Part 154 UE 89 EN ISO 4126-3:2020 3: Safety valves and bursting disc safety devices in combination CEN/TC 69 2014/68/EU (ISO 4126-3:2020) 155 UE 89 EN 16767:2020 Industrial valves - Metallic check valves CEN/TC 69 2014/68/EU Water meters for cold potable water and hot water - Part 5: 156 UE 109 EN ISO 4064-5:2017 CEN/TC 92 2014/32/EU Installation requirements (ISO 4064-5:2014) Prefabricated gypsum plasterboard panels with a cellular paper- 157 UE 111 EN 13915:2017 CEN/TC 241 305/2011 board core - Definitions, requirements and test methods Preformed plasterboard cornices - Definitions, requirements and 158 UE 111 EN 14209:2017 CEN/TC 241 305/2011 test methods Metal beads and feature profiles for use with gypsum plaster- 159 UE 111 EN 14353:2017 CEN/TC 241 305/2011 boards - Definitions, requirements and test methods Gypsum based adhesives for thermal/acoustic insulation compos- 160 UE 111 EN 14496:2017 ite panels and gypsum boards - Definitions, requirements and CEN/TC 241 305/2011 test methods Thermal insulation products for building equipment and indus- 161 UE 113 EN 14308:2015 trial installations - Factory made rigid polyurethane foam (PUR) CEN/TC 88 305/2011 and polyisocyanurate foam (PIR) products - Specification Thermal insulation products for building equipment and industri- 162 UE 113 EN 14309:2015 al installations - Factory made products of expanded polystyrene CEN/TC 88 305/2011 (EPS) - Specification Thermal insulation products for building equipment and industri- 163 UE 113 EN 14313:2015 al installations - Factory made polyethylene foam (PEF) products CEN/TC 88 305/2011 - Specification Thermal insulation products for building equipment and indus- 164 UE 113 EN 14314:2015 trial installations - Factory made phenolic foam (PF) products CEN/TC 88 305/2011 - Specification Children's furniture - Cribs - Safety requirements and test 165 UE 118 EN 1130:2019 CEN/TC 207 2001/95/EC methods Safety of woodworking machines - Circular sawing machines - 166 UE 118 EN 1870-17:2012+A1:2015 Part 17: Manual horizontal cutting cross-cut sawing machines CEN/TC 142 2006/42/EC with one saw unit (radial arm saws) Safety of woodworking machines - Circular sawing machines - 167 UE 118 EN 1870-7:2012 Part 7: Single blade log sawing machines with integrated feed CEN/TC 142 2006/42/EC table and manual loading and/or unloading 168 UE 118 EN 14988:2017+A1:2020 Children's high chairs - Requirements and test methods CEN/TC 364 2001/95/EC 169 UE 122 EN 1096-4:2018 Glass in building - Coated glass - Part 4: Product standard CEN/TC 129 305/2011 Glass in building - Insulating glass units - Part 5: Product stan- 170 UE 122 EN 1279-5:2018 CEN/TC 129 305/2011 dard Child care articles - Table mounted chairs - Safety requirements 171 UE 125 EN 1272:2017 CEN/TC 252 2001/95/EC and test methods Child use and care articles - Baby carriers - Safety requirements 172 UE 125 EN 13209-2:2015 CEN/TC 252 2001/95/EC and test methods - Part 2: Soft carrier 173 UE 131 EN IEC 62031:2020 LED modules for general lighting - Safety specifications CLC/TC 34 2014/35/EU

48 Explosive atmospheres - Explosion prevention and protection - 174 UE 137 EN 1127-1:2019 CEN/TC 305 2006/42/EC Part 1: Basic concepts and methodology Explosive atmospheres - Part 38: Equipment and components in EN ISO/IEC 80079-38:2016/ 175 UE 137 explosive atmospheres in underground mines (ISO/IEC 80079- CEN/TC 305 2006/42/EC A1:2018 38:2016) 176 UE 146 EN 12080:2017 Railway applications - Axleboxes - Rolling bearings CEN/TC 256 2008/57/EC 177 UE 146 EN 12081:2017 Railway applications - Axleboxes - Lubricating greases CEN/TC 256 2008/57/EC 178 UE 146 EN 12082:2017 Railway applications - Axleboxes - Performance testing CEN/TC 256 2008/57/EC Railway applications - Air conditioning for main line rolling stock 179 UE 146 EN 13129:2016 CEN/TC 256 2008/57/EC - Comfort parameters and type tests Railway applications - Track - Concrete sleepers and bearers - 180 UE 146 EN 13230-4:2016+A1:2020 CEN/TC 256 2016/797/EU Part 4: Prestressed bearers for switches and crossings Railway applications - Track - Concrete sleepers and bearers - 181 UE 146 EN 13230-6:2020 CEN/TC 256 2016/797/EU Part 6: Design Railway applications - Track - Acceptance of works - Part 5: 182 UE 146 EN 13231-5:2018 Procedures for rail reprofiling in plain line, switches, crossings CEN/TC 256 2008/57/EC and expansion devices Railway applications - Aerodynamics - Part 4: Requirements and 183 UE 146 EN 14067-4:2013+A1:2018 CEN/TC 256 2008/57/EC test procedures for aerodynamics on open track Railway applications - Marking on railway vehicles - Part 1: 184 UE 146 EN 15877-1:2012+A1:2018 CEN/TC 256 2008/57/EC Freight wagons Railway applications - Braking systems of multiple unit trains - 185 UE 146 EN 16185-1:2014+A1:2020 CEN/TC 256 2016/797/EU Part 1: Requirements and definitions Railway applications - Braking systems of multiple unit trains - 186 UE 146 EN 16185-2:2014+A1:2019 CEN/TC 256 2016/797/EU Part 2: Test methods Railway applications - Driver's cab - Part 1: Anthropometric data 187 UE 146 EN 16186-1:2014+A1:2018 CEN/TC 256 2008/57/EC and visibility Railway applications - Braking - Functional and performance 188 UE 146 EN 16207:2014+A1:2019 criteria of Magnetic Track Brake systems for use in railway rolling CEN/TC 256 2016/797/EU stock 189 UE 146 EN 16452:2015+A1:2019 Railway applications - Braking - Brake blocks CEN/TC 256 2008/57/EC Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors 190 UE 147 EN 12102-2:2019 CEN/TC 113 812/2013 - Determination of the sound power level - Part 2: Heat pump water heaters Air conditioners, liquid chilling packages and heat pumps for 191 UE 147 EN 14511-3:2018 space heating and cooling and process chillers, with electrically CEN/TC 113 626/2011 driven compressors - Part 3: Test methods Direct acting indicating analogue electrical measuring instru- 192 UE 166 EN IEC 60051-5:2018 ments and their accessories - Part 5: Special requirements for CLC/TC 85X 2014/35/EU phase meters, power factor meters and synchroscopes Direct acting indicating analogue electrical measuring instru- 193 UE 166 EN IEC 60051-6:2018 ments and their accessories - Part 6: Special requirements for CLC/TC 85X 2014/35/EU ohmmeters (impedance meters) and conductance meters Direct acting indicating analogue electrical measuring instru- 194 UE 166 EN IEC 60051-7:2018 ments and their accessories - Part 7: Special requirements for CLC/TC 85X 2014/35/EU multi-function instruments Direct acting indicating analogue electrical measuring instru- 195 UE 166 EN IEC 60051-8:2018 ments and their accessories - Part 8: Special requirements for CLC/TC 85X 2014/35/EU accessories 196 UE 169 EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing CEN/TC 267 2014/68/EU Copper and copper alloys - Seamless, round tubes for air condi- 197 UE 171 EN 12735-1:2020 CEN/TC 133 2014/68/EU tioning and refrigeration - Part 1: Tubes for piping systems Wastewater lifting plants for buildings and sites - Part 1: Lifting 198 UE 186 EN 12050-1:2015 CEN/TC 165 305/2011 plants for wastewater containing faecal matter Wastewater lifting plants for buildings and sites - Part 2: Lifting 199 UE 186 EN 12050-2:2015 CEN/TC 165 305/2011 plants for faecal-free wastewater Wastewater lifting plants for buildings and sites - Part 3: Lifting 200 UE 186 EN 12050-3:2015 CEN/TC 165 305/2011 plants for limited applications Wastewater lifting plants for buildings and sites - Part 4: Non-re- 201 UE 186 EN 12050-4:2015 turn valves for faecal-free wastewater and wastewater containing CEN/TC 165 305/2011 faecal matter Small craft - Marine propulsion reciprocating internal com- 202 UE 199 EN ISO 8665:2017 bustion engines - Power measurements and declarations (ISO CEN/SS T01 2013/53/EU 8665:2006) Small craft - Steering gear - Cable and pulley systems (ISO 203 UE 199 EN ISO 8847:2017 CEN/SS T01 2013/53/EU 8847:2004)

49 Small craft - Stability and buoyancy assessment and categori- 204 UE 199 EN ISO 12217-1:2017 zation - Part 1: Non-sailing boats of hull length greater than or CEN/SS T01 2013/53/EU equal to 6 m (ISO 12217-1:2015) Small craft - Stability and buoyancy assessment and categoriza- 205 UE 199 EN ISO 12217-3:2017 CEN/SS T01 2013/53/EU tion - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) Small craft - Steering gear - Geared link systems (ISO 206 UE 199 EN ISO 13929:2017 CEN/SS T01 2013/53/EU 13929:2001) Small craft - Anchoring, mooring and towing - Strong points (ISO 207 UE 199 EN ISO 15084:2018 CEN/SS T01 2013/53/EU 15084:2003) Small craft - Man-overboard prevention and recovery - Amend- 208 UE 199 EN ISO 15085:2003/A2:2018 CEN/SS T01 2013/53/EU ment 2 (ISO 15085:2003/Amd 2:2017) Small craft - Inboard petrol engines - Engine-mounted fuel and 209 UE 199 EN ISO 15584:2017 CEN/SS T01 2013/53/EU electrical components (ISO 15584:2001) Small craft - Inboard diesel engines - Engine-mounted fuel, oil 210 UE 199 EN ISO 16147:2021 CEN/TC 464 2013/53/EU and electrical components (ISO 16147:2020) Welded steel tubes for pressure purposes - Technical delivery CEN/TC 459/ 211 UE 202 EN 10217-1:2019 conditions - Part 1: Electric welded and submerged arc welded 2014/68/EU SC 10 non-alloy steel tubes with specified room temperature properties Welded steel tubes for pressure purposes - Technical delivery CEN/TC 459/ 212 UE 202 EN 10217-2:2019 conditions - Part 2: Electric welded non-alloy and alloy steel 2014/68/EU SC 10 tubes with specified elevated temperature properties Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded CEN/TC 459/ 213 UE 202 EN 10217-3:2019 2014/68/EU alloy fine grain steel tubes with specified room, elevated and low SC 10 temperature properties Welded steel tubes for pressure purposes - Technical delivery CEN/TC 459/ 214 UE 202 EN 10217-4:2019 conditions - Part 4: Electric welded non-alloy steel tubes with 2014/68/EU SC 10 specified low temperature properties Welded steel tubes for pressure purposes - Technical delivery CEN/TC 459/ 215 UE 202 EN 10217-5:2019 conditions - Part 5: Submerged arc welded non-alloy and alloy 2014/68/EU SC 10 steel tubes with specified elevated temperature properties Welded steel tubes for pressure purposes - Technical delivery CEN/TC 459/ 216 UE 202 EN 10217-6:2019 conditions - Part 6: Submerged arc welded non-alloy steel tubes 2014/68/EU SC 10 with specified low temperature properties Fixed firefighting systems - Hose systems - Part 2: Hose systems 217 UE 216 EN 671-2:2012 CEN/TC 191 305/2011 with lay-flat hose Protective garments for motorcycle riders - Part 2: Class AAA 218 UE 227 EN 17092-2:2020 CEN/TC 162 2016/425 garments - Requirements Protective garments for motorcycle riders - Part 3: Class AA 219 UE 227 EN 17092-3:2020 CEN/TC 162 2016/425 garments - Requirements Protective garments for motorcycle riders - Part 4: Class A gar- 220 UE 227 EN 17092-4:2020 CEN/TC 162 2016/425 ments - Requirements Protective garments for motorcycle riders - Part 5: Class B gar- 221 UE 227 EN 17092-5:2020 CEN/TC 162 2016/425 ments - Requirements Protective garments for motorcycle riders - Part 6: Class C gar- 222 UE 227 EN 17092-6:2020 CEN/TC 162 2016/425 ments - Requirements Lasers and laser-related equipment - Test method and classifi- cation for the laser resistance of surgical drapes and/or patient 223 UE 230 EN ISO 11810:2015 CEN/TC 123 93/42/EEC protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) EN 60335-2-78:2003/ Household and similar electrical appliances - Safety - Part 2-78: 224 UE 239 CLC/TC 61 2014/35/EU A11:2020 Particular requirements for outdoor barbecues Household and similar electrical appliances - Safety - Part 2-82: EN 60335-2-82:2003/ 225 UE 239 Particular requirements for amusement machines and personal CLC/TC 61 2014/35/EU A2:2020 service machines EN 60335-2-85:2003/ Household and similar electrical appliances - Safety - Part 2-85: 226 UE 239 CLC/TC 61 2014/35/EU A2:2020 Particular requirements for fabric steamers Household and similar electrical appliances - Safety - Part 2-43: 227 UE 239 EN IEC 60335-2-43:2020 CLC/TC 61 2014/35/EU Particular requirements for clothes dryers and towel rails Safety of transportable motor-operated electric tools - Part 2-11: 228 UE 255 EN 61029-2-11:2012 CLC/TC 116 2006/42/EC Particular requirements for combined mitre and bench saws Safety of transportable motor-operated electric tools - Part 2-11: 229 UE 255 EN 61029-2-11:2012/A11:2013 CLC/TC 116 2006/42/EC Particular requirements for combined mitre and bench saws Electric motor-operated hand-held tools, transportable tools 230 UE 255 EN 62841-2-11:2016/A1:2020 and lawn and garden machinery - Safety - Part 2-11: Particular CLC/TC 116 2006/42/EC requirements for hand-held reciprocating saws Electric Motor-Operated Hand-Held Tools, Transportable Tools 231 UE 255 EN 62841-4-1:2020 and Lawn and Garden Machinery - Safety - Part 4-1: Particular CLC/TC 116 2006/42/EC requirements for chain saws

50 Electric motor-operated hand-held tools, transportable tools and 232 UE 255 EN 62841-4-2:2019 lawn and garden machinery - Safety - Part 4-2: Particular require- CLC/TC 116 2006/42/EC ments for hedge trimmers 233 UE 274 EN 352-1:2020 Hearing protectors - General requirements - Part 1: Earmuffs CEN/TC 159 2016/425 Hearing protectors - Safety requirements - Part 10: Entertain- 234 UE 274 EN 352-10:2020 CEN/TC 159 2016/425 ment audio earplugs 235 UE 274 EN 352-2:2020 Hearing protectors - General requirements - Part 2: Earplugs CEN/TC 159 2016/425 Hearing protectors - General requirements - Part 3: Earmuffs 236 UE 274 EN 352-3:2020 CEN/TC 159 2016/425 attached to head protection and/or face protection devices Hearing protectors - Safety requirements - Part 4: Level-depen- 237 UE 274 EN 352-4:2020 CEN/TC 159 2016/425 dent earmuffs Hearing protectors - Safety requirements - Part 5: Active noise 238 UE 274 EN 352-5:2020 CEN/TC 159 2016/425 reduction earmuffs Hearing protectors - Safety requirements - Part 6: Earmuffs with 239 UE 274 EN 352-6:2020 CEN/TC 159 2016/425 safety-related audio input Hearing protectors - Safety requirements - Part 7: Level-depen- 240 UE 274 EN 352-7:2020 CEN/TC 159 2016/425 dent earplugs Hearing protectors - Safety requirements - Part 8: Entertainment 241 UE 274 EN 352-8:2020 CEN/TC 159 2016/425 audio earmuffs Hearing protectors - Safety requirements - Part 9: Earplugs with 242 UE 274 EN 352-9:2020 CEN/TC 159 2016/425 safety-related audio input Ventilation for buildings - Air handling units - Rating and perfor- 1253/2014, 243 UE 302 EN 13053:2019 CEN/TC 156 mance for units, components and sections 1254/2014 Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted 244 UE 302 EN 14037-1:2016 CEN/TC 130 305/2011 radiant panels for space heating - Technical specifications and requirements 245 UE 318 EN 13830:2015+A1:2020 Curtain walling - Product standard CEN/TC 33 305/2011 Silica-calcium fume for concrete - Definitions, requirements and 246 UE 321 EN 16622:2015 CEN/TC 104 305/2011 conformity criteria Environmental management - Life cycle assessment - Principles 247 UE 323 EN ISO 14040:2006/A1:2020 CEN/SS S26 765/2008 and framework - Amendment 1 (ISO 14040:2006/Amd 1:2020) Environmental management - Life cycle assessment - Require- 248 UE 323 EN ISO 14044:2006/A2:2020 ments and guidelines - Amendment 2 (ISO 14044:2006/Amd CEN/SS S26 765/2008 2:2020) Environmental management - Environmental communication - 249 UE 323 EN ISO 14063:2020 CEN/SS S26 765/2008 Guidelines and examples (ISO 14063:2020) Ship and marine technology - Technical requirements for dry-dis- 250 UE 357 EN ISO 21593:2019 connect/connect couplings for bunkering liquefied natural gas CEN/TC 282 2014/94/EU (ISO 21593:2019) Pyrotechnic articles - Other pyrotechnic articles - Part 3: Catego- 251 UE 358 EN 16263-3:2015 CEN/TC 212 2007/23/EC ries and types Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test 252 UE 358 EN 16263-4:2015 CEN/TC 212 2007/23/EC methods Postal services - Mail item processing - Optical characteristics for 253 UE 373 EN 13619:2002 CEN/TC 331 97/67/EC processing letters Audio/video, information and communication technology 254 UE 375 EN IEC 62368-3:2020 equipment - Part 3: Safety aspects for DC power transfer through CLC/TC 108X 2014/35/EU communication cables and ports Particular safety requirements for equipment to be connected to 255 UE 375 EN 62949:2017 CLC/TC 108X 2014/35/EU information and communication networks Sterilization of health-care products - Ethylene oxide - Require- ments for the development, validation and routine control of a 256 UE 377 EN ISO 11135:2014/A1:2019 CEN/TC 204 93/42/EEC sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135:2014/Amd 1:2018) Sterilization of health care products - Microbiological methods 257 UE 377 EN ISO 11737-2:2020 - Part 2: Tests of sterility performed in the definition, validation CEN/TC 204 93/42/EEC and maintenance of a sterilization process (ISO 11737-2:2019) Medical vehicles and their equipment - Air ambulances - Part 1: 258 UE 377 EN 13718-1:2014+A1:2020 CEN/TC 239 93/42/EEC Requirements for medical devices used in air ambulances Medical vehicles and their equipment - Air ambulances - Part 2: 259 UE 377 EN 13718-2:2015+A1:2020 CEN/TC 239 93/42/EEC Operational and technical requirements for air ambulances Medical devices - Application of risk management to medical 260 UE 377 EN ISO 14971:2019 CEN/CLC/JTC 3 93/42/EEC devices (ISO 14971:2019) Non-invasive sphygmomanometers - Part 1: Requirements and 261 UE 377 EN ISO 81060-1:2012 test methods for non-automated measurement type (ISO 81060- CEN/TC 205 93/42/EEC 1:2007)

51 SECȚIUNEA 3 CAPITOLUL 1

Proiecte de standarde europene CEN-CENELEC cu faze de vot în 2021

Nr crt Minister CT Indicativ EN Titlu Faza TC

Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other 1 MADR 95 FprEN ISO 6888-1 5020 CEN/TC 463 species) - Part 1: Mehod using Baird-Parker agar medium (ISO/FDIS 6888- 1:2021) Microbiology of the food chain - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other 2 MADR 95 FprEN ISO 6888-2 5020 CEN/TC 463 species) - Part 2: Method using rabbit plasma fibrinogen agar medium (ISO/FDIS 6888-2:2021) 3 MADR 95 FprEN 17203 Foodstuffs - Determination of citrinin in food by HPLC-MS/MS 5020 CEN/TC 275 Foodstuffs - General guidelines for the validation of qualitative real-time 4 MADR 95 FprCEN/TS 17329-1 5020 CEN/TC 275 PCR methods - Part 1: Single-laboratory validation Animal feeding stuffs: Methods of sampling and analysis - Determination 5 MADR 95 EN 17462:2021 5020 CEN/TC 327 of the radionuclides Iodine-131, Caesium-134 and Caesium-137 in feed Algae, algae products and intermediates - Methods of sampling and analy- 6 MADR 95 prEN 17605 4020 CEN/TC 454 sis - Sample treatment Foodstuffs - Multimethod for the determination of aflatoxins, deoxyniva- 7 MADR 95 prEN 17641 lenol, fumonisins, ochratoxin A, T-2 toxin, HT-2 toxin and zearalenone by 4020 CEN/TC 275 LC-MS/MS Foodstuffs - Detection of food allergens by liquid chromatography - mass 8 MADR 95 prEN 17644 4020 CEN/TC 275 spectrometry (LC-MS) methods - General considerations Microbiology of the food chain - Methods for the detection of Anisakidae 9 MADR 95 FprEN ISO 23036-2 L3 larvae in fish and fishery products - Part 2: Artificial digestion method 5020 CEN/TC 463 (ISO/FDIS 23036-2:2019) Microbiology of the food chain - Methods for the detection of Anisakidae 10 MADR 95 FprEN ISO 23036-1 L3 larvae in fish and fishery products - Part 1: UV-press method (ISO/FDIS 5020 CEN/TC 463 23036-1:2020) Cheese -- Guidance on sample preparation for physical and chemical 11 MADR 95 prEN ISO 24223 4020 CEN/TC 302 testing General principles and requirements for testing for quality and nicotine 12 MADR 97 prEN 17633 4020 CEN/TC 437 levels of e-liquids General principles for manufacturing, filling and holding e-liquids for 13 MADR 97 prEN 17647 4020 CEN/TC 437 prefilled containers or products 14 MADR 97 prEN 17648 E-liquid ingredients 4010 CEN/TC 437 15 MADR 180 FprEN ISO 4120 Sensory analysis - Methodology - Triangle test (ISO/FDIS 4120:2020) 5020 CEN/SS C01 Animal and vegetable fats and oils - Determination of melting point in 16 MADR 180 prEN ISO 6321 4020 CEN/TC 307 open capillary tubes (slip point) (ISO/DIS 6321:2020) Maize - Determination of moisture content (on milled grains and on whole 17 MADR 180 FprEN ISO 6540 5020 CEN/TC 338 grains) (ISO/FDIS 6540:2020) Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination 18 MADR 180 prEN 14111 4010 CEN/TC 307 of iodine value Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 4: Method using 19 MADR 180 prEN ISO 18363-4 4020 CEN/TC 307 fast alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol by GC-MS/MS (ISO/DIS 18363-4:2020) 20 MADR 180 FprCEN ISO/TR 29263 Cereals and cereal products - Sampling studies (ISO/DTR 29263:2021) 5020 CEN/TC 338 21 MAI 216 FprEN 54-1 Fire detection and fire alarm systems - Part 1: Introduction 5020 CEN/TC 72 Fixed firefighting systems - Components for gas extinguishing systems - 22 MAI 216 prEN 12094-8 4020 CEN/TC 191 Part 8: Requirements and test methods for connectors Fixed firefighting systems - Components for sprinkler and water spray 23 MAI 216 EN 12259-14:2020/prA1 4010 CEN/TC 191 systems - Part 14: Sprinklers for residential applications

52 Fire-fighting hoses - Rubber and plastics suction hoses and hose assem- 24 MAI 216 FprEN ISO 14557 5020 CEN/TC 192 blies (ISO/FDIS 14557:2021) Fixed firefighting systems - Water mist systems - Part 3: Test protocol for 25 MAI 216 EN 14972-3:2021 5020 CEN/TC 191 office, school classrooms and hotel for automatic nozzle systems Fire resistance tests for service installations - Part 11: Fire protective 26 MAI 217 EN 1366-11:2018/prA1 4020 CEN/TC 127 systems for cable systems and associated components Reaction to fire tests for building products - Building products excluding 27 MAI 217 EN 13823:2020/prA1 4010 CEN/TC 127 floorings exposed to the thermal attack by a single burning item Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their 28 MAI 217 prEN 15269-3 4020 CEN/TC 127 elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows Extended application of results from fire resistance tests for service 29 MAI 217 prEN 15882-2 4010 CEN/TC 127 installations - Part 2: Fire dampers Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire 30 MAI 217 FprEN 17020-4 5020 CEN/TC 127 resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows Extended application of test results on durability of self-closing for fire 31 MAI 217 prEN 17020-1 resistance and/or smoke control doorsets and openable windows - Part 1: 3099 CEN/TC 127 Durability of self-closing of hinged and pivoted steel doorsets Extended application of test results on durability of self-closing for fire 32 MAI 217 prEN 17020-2 resistance and/or smoke control doorsets and openable windows - Part 2: 4010 CEN/TC 127 Durability of self-closing of steel rolling shutters Extended application of test results on durability of self-closing for fire 33 MAI 217 prEN 17020-3 resistance and/or smoke control doorsets and openable windows - Part 3: 4010 CEN/TC 127 Durability of self-closing of steel sliding doorsets 34 MAI 376 FprEN ISO 22300 Security and resilience - Vocabulary (ISO/FDIS 22300:2020) 5020 CEN/TC 391 Security and resilience - Community resilience - Guidelines for planning 35 MAI 376 prEN ISO 22319 4020 CEN/TC 391 the involvement of spontaneous volunteers (ISO 22319:2017) Conservation of cultural heritage - Procedure for the analytical evaluation 36 MC 380 FprEN 17488 to select cleaning methods for porous inorganic materials used in cultural 5020 CEN/TC 346 heritage Cultural heritage - Investigation and monitoring of archaeological deposits 37 MC 380 prEN 17652 4020 CEN/TC 346 for preservation in situ Conservation of cultural heritage - Determination of water absorption by 38 MC 380 prEN 17655 4010 CEN/TC 346 contact sponge method CEN/CLC/ETSI/ 39 MCID 6 prEN 301549 Accessibility requirements for ICT products and services 4020 JWG eAcc Fibre management systems and protective housings to be used in optical 40 MCID 138 prEN 50411-3-1 fibre communication systems - Product specifications - Part 3-1: Fibre 4020 CLC/TC 86BXA management system, splice wall box, for category C & G Fibre management systems and protective housings to be used in optical 41 MCID 138 prEN 50411-3-2 fibre communication systems - Product specifications - Part 3-2: Sin- 4020 CLC/TC 86BXA gle-mode mechanical fibre splice Fibre management systems and protective housings to be used in optical 42 MCID 138 prEN 50411-3-6 fibre communication systems - Product specifications - Part 3-6: Multi- 4020 CLC/TC 86BXA mode mechanical fibre splice Fibre management systems and protective housings to be used in optical 43 MCID 138 prEN 50411-6-1 fibre communication systems - Product specifications - Part 6-1: Unpro- 4020 CLC/TC 86BXA tected microduct for category S and A Fibre optic access to end-user - A guideline to building of FTTX fibre optic 44 MCID 138 CLC/prTR 50510 5020 CLC/TC 86A network Optical fibre cables - Basic optical cable test procedures - Part 401: 45 MCID 138 prEN IEC 60794-1-401:2020 Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), 4020 CLC/TC 86A Method H1 Optical Fibre Cables - Basic optical cable test procedures - Part 402: Elec- 46 MCID 138 prEN IEC 60794-1-402:2020 trical test methods - Lightning test (for OPGW, OPPC and OPAC), Method 4020 CLC/TC 86A H2 Optical fibre cables - Part 1-219: Generic specification - Basic optical cable 47 MCID 138 prEN IEC 60794-1-219:2020 4020 CLC/TC 86A test procedures - Material compatibility test, Method F19 Optical fibre cables - Part 1-211: Generic specification - Basic optical cable 48 MCID 138 FprEN IEC 60794-1-211:2020 test procedures - Environmental test methods - Sheath shrinkage, method 5020 CLC/TC 86A F11 Optical fibre cables - Part 1-31: Generic specification - Optical cable ele- 49 MCID 138 prEN IEC 60794-1-31:2021 4020 CLC/TC 86A ments - Optical fibre ribbon Optical fibre cables - Part 3-70: Outdoor cables - Family specification for 50 MCID 138 FprEN IEC 60794-3-70:2021 5020 CLC/TC 86A outdoor optical fibre cables for rapid/multiple deployment Optical fibre cables - Part 4-30: Aerial optical cables along electrical power 51 MCID 138 FprEN IEC 60794-4-30:2021 lines - Family specification for optical phase conductor (OPPC) optical 5020 CLC/TC 86A cables

53 Optical fibre cables - Part 1-31: Generic specification - Optical cable ele- 52 MCID 138 prEN IEC 60794-1-31:2021 4020 CLC/TC 86A ments - Optical fibre ribbon Fibre optic communication subsystem test procedures - Part 2-8: Digital 53 MCID 138 FprEN IEC 61280-2-8:2020 5020 CLC/SR 86C systems - Determination of low BER using Q-factor measurements Fibre optic communication subsystem test procedures - Part 1-3: General 54 MCID 138 prEN IEC 61280-1-3:2021 communication subsystems - Measurement of central wavelength, spec- 4020 CLC/SR 86C tral width and additional spectral characteristics Fibre optic communication subsystem test procedures - Part 1-3: General 55 MCID 138 prEN IEC 61280-1-3:2021 communication subsystems - Measurement of central wavelength, spec- 4020 CLC/SR 86C tral width and additional spectral characteristics Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements 56 MCID 138 prEN 61300-3-7:2020 4020 CLC/TC 86BXA - Wavelength dependence of attenuation and return loss of single mode components Fibre optic interconnecting devices and passive components - Basic test 57 MCID 138 prEN IEC 61300-2-24:2020 and measurement procedures - Part 2-24: Tests - Screen testing of ceramic 4020 CLC/TC 86BXA alignment split sleeve by stress application Fibre optic interconnecting devices and passive components - Basic test 58 MCID 138 FprEN IEC 61300-2-10:2020 and measurement procedures - Part 2-10: Tests - Crush and load resis- 5020 CLC/TC 86BXA tance Fibre optic interconnecting devices and passive components - Perfor- 59 MCID 138 prEN IEC 61753-131-03:2021 mance standard - Part 131-03: Single-mode mechanical fibre splice for 4020 CLC/TC 86BXA category OP - Outdoor Protected environment Fibre optic interconnecting devices and passive components performance 60 MCID 138 prEN IEC 61753-111-9:2021 4020 CLC/TC 86BXA standard - Part 111-9: Sealed closures for category S - Subterranean Fibre optic interconnecting devices and passive components performance 61 MCID 138 prEN IEC 61753-101-3:2021 standard - Part 101-3: Fibre management systems for Category OP - Out- 4020 CLC/TC 86BXA door Protected environment Fibre optic interconnecting devices and passive components - Perfor- 62 MCID 138 FprEN IEC 61753-111-8:2021 5020 CLC/TC 86BXA mance standard - Part 111-8: Sealed closures for Category G - Ground Fibre optic interconnecting devices and passive components performance 63 MCID 138 prEN IEC 61753-111-7:2021 4020 CLC/TC 86BXA standard - Part 111- 07: Sealed closures for category A - Aerial Fibre optic sensors - Part 5-1: Tilt measurement - Tilt sensors based on 64 MCID 138 prEN IEC 61757-5-1:2021 4020 CLC/SR 86C fibre Bragg gratings Fibre Optic Sensors - Part 3-2: Acoustic sensing and vibration measure- 65 MCID 138 prEN IEC 61757-3-2:2021 4020 CLC/SR 86C ment - Distributed sensing Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature 66 MCID 138 prEN IEC 61757-2-1:2021 4020 CLC/SR 86C sensors based on fibre Bragg gratings Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature 67 MCID 138 prEN IEC 61757-2-1:2021 4020 CLC/SR 86C sensors based on fibre Bragg gratings Fibre optic sensors - Part 5-1: Tilt measurement - Tilt sensors based on 68 MCID 138 prEN IEC 61757-5-1:2021 4020 CLC/SR 86C fibre Bragg gratings Fibre Optic Sensors - Part 3-2: Acoustic sensing and vibration measure- 69 MCID 138 prEN IEC 61757-3-2:2021 4020 CLC/SR 86C ment - Distributed sensing Fibre optic active components and devices - Package and interface stan- 70 MCID 138 FprEN IEC 62148-15:2021 5020 CLC/SR 86C dards - Part 15: Discrete vertical cavity surface emitting laser packages 71 MCID 204 FprCEN/TS 17631 Personal identification - Biometric group access control 5020 CEN/TC 224 Personal identification – European enrolment guide for biometric ID 72 MCID 204 FprCEN/TS 17661 5020 CEN/TC 224 documents (EEG) Open Data Communication in Building Automation, Controls and Building 73 MCID 207 prEN 14908-9 Management - Control Network Protocol - Part 9: Wireless Communication 4020 CEN/TC 247 in ISM bands Open Data Communication in Building Automation, Controls and Building 74 MCID 207 prEN 14908-8 Management - Control Network Protocol - Part 8: Communication using 4020 CEN/TC 247 Broadband over Power Line Networks - with internet protocols 75 MCID 207 prEN 17609 Building automation and control systems - Control applications 4020 CEN/TC 247 Signalling on low-voltage electrical installations in the frequency range 3 76 MCID 207 prEN 50065-4-1 kHz to 148,5 kHz Part 4-1: Low voltage decoupling filters - Generic specifi- 4010 CLC/TC 205A cation Signalling on low voltage electrical installations in the frequency range 3 77 MCID 207 prEN 50065-4-2 kHz to 148,5 kHz Part 4-2: Low voltage decoupling filters - Safety require- 4010 CLC/TC 205A ments Signalling on low-voltage electrical installations in the frequency range 3 78 MCID 207 prEN 50065-4-3 4010 CLC/TC 205A kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter - Incoming filter Signalling on low-voltage electrical installations in the frequency range 3 79 MCID 207 prEN 50065-4-4 4010 CLC/TC 205A kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter Signalling on low-voltage electrical installations in the frequency range 3 80 MCID 207 prEN 50065-4-5 kHz to 148,5 kHz Part 4-5: Low voltage decoupling filter - Segmentation 4010 CLC/TC 205A filter

54 Signalling on low-voltage electrical installations in the frequency range 3 81 MCID 207 prEN 50065-4-6 4010 CLC/TC 205A kHz to 148,5 kHz Part 4-6: Low voltage decoupling filters - Phase coupler Signalling on low-voltage electrical installations in the frequency range 3 82 MCID 207 prEN 50065-4-7 kHz to 148,5 kHz Part 4-7: Portable low voltage decoupling filters - Safety 4010 CLC/TC 205A requirements Information technology - Data centre facilities and infrastructures - Part 83 MCID 207 EN 50600-2-1:2021 5020 CLC/TC 215 2-1: Building construction Information technology - Data centre facilities and infrastructures - Part 84 MCID 207 FprEN 50600-2-5 5020 CLC/TC 215 2-5: Security systems Information technology - Automated infrastructure management (AIM) 85 MCID 207 EN 50667:2016/prA1:2021 4010 CLC/TC 215 systems - Requirements, data exchange and applications 86 MCID 208 prEN 17640 Fixed time cybersecurity evaluation methodology for ICT products 3099 CEN/CLC/JTC 13 Security techniques - Extension to ISO/IEC 27001 and ISO/IEC 27002 for 87 MCID 208 prEN ISO/IEC 27701 privacy information management - Requirements and guidelines (ISO/IEC 4020 CEN/CLC/JTC 13 27701:2019) 88 MCID 319 prCEN ISO/TS 82304-2 Health software - Part 2: Health and wellness apps - Quality and reliability 5020 CEN/TC 251 89 MCID 375 prEN IEC 60958-3:2021 Digital audio interface - Part 3: Consumer applications (TA 20) 4020 CLC/TC 100X 90 MCID 375 prEN IEC 60985-1:2021 Digital audio interface - Part 1: General (TA 20) 4020 CLC/TC 100X Parasitic communication protocol for radio-frequency wireless power 91 MCID 375 prEN IEC 62980:2021 4020 CLC/TC 100X transmission (TA 15) 92 MCID 375 prEN IEC 63087-1:2020 Measurement method for assistive listening functionality (TA 16) 4020 CLC/TC 100X Spatial wireless power transfer based on multiple magnetic resonances - 93 MCID 375 FprEN IEC 63245-1:2020 5020 CLC/TC 100X Part 1: Requirements Multimedia systems and equipment for cars - Configurable Car Infotain- 94 MCID 375 prEN IEC 63246-2:2020 4020 CLC/TC 100X ment Services (CCIS) - Part 2: Requirements (TA 17) Multimedia systems and equipment for cars - Configurable Car Infotain- 95 MCID 375 prEN IEC 63246-3:2020 4020 CLC/TC 100X ment Services (CCIS) - Part 3: Framework (TA 17) Management and Interfaces for WPT - Device to device wireless charging 96 MCID 375 prEN IEC 63254:2021 4020 CLC/TC 100X (D2DWC) for mobile devices with wireless power TX/RX module (TA 15) Portable multimedia equipment - Determination of battery duration - Part 97 MCID 375 prEN IEC 63296-1:2021 4020 CLC/TC 100X 1: Powered loudspeaker equipment (TA 19) e-Competence Framework (e-CF) - A common European Framework for ICT 98 MCID 387 CEN/TR 16234-4:2021 5020 CEN/TC 428 Professionals in all sectors - Part 4: Case Studies e-Competence Framework (e-CF) - A common European Framework for ICT 99 MCID 387 CEN/TR 16234-3:2021 5020 CEN/TC 428 Professionals in all sectors - Part 3: Methodology e-Competence Framework (e-CF) - A common European Framework for ICT 100 MCID 387 CEN/TR 16234-2:2021 5020 CEN/TC 428 Professionals in all sectors - Part 2: User Guide Cement - Part 5: Portland-composite cement CEM II/C-M and Composite 101 MDLPA 111 EN 197-5:2021 5020 CEN/TC 51 cement CEM VI 102 MDLPA 111 EN 459-2:2021 Building lime - Part 2: Test methods 5020 CEN/TC 51 Cement and building lime - Environmental product declarations - Product 103 MDLPA 111 EN 16908:2017/prA1 4020 CEN/TC 51 category rules complementary to EN 15804 Construction products: Assessment of release of dangerous substances - 104 MDLPA 113 prEN 16637-2 4020 CEN/TC 351 Part 2: Horizontal dynamic surface leaching test Construction products: Assessment of release of dangerous substances 105 MDLPA 113 prEN 16637-1 - Part 1: Guidance for the determination of leaching tests and additional 4020 CEN/TC 351 testing steps Construction products: Assessment of release of dangerous substances - 106 MDLPA 113 prEN 16637-3 4020 CEN/TC 351 Part 3: Horizontal up-flow percolation test Flexible sheets for waterproofing - Environmental product declarations - Product Category Rules for reinforced bitumen, plastic and rubber 107 MDLPA 113 prEN 17388-2 4020 CEN/TC 254 flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D Flexible sheets for waterproofing - Environmental product declaration - 108 MDLPA 113 prEN 17388-1 Product Category Rules for reinforced bitumen, plastic and rubber flexible 4020 CEN/TC 254 sheets for (roof) waterproofing - Part 1: Cradle to grave and module D Construction products: Assessment of release of dangerous substances - 109 MDLPA 113 prEN 17637 4020 CEN/TC 351 Dose assessment of emitted gamma radiation 110 MDLPA 113 FprCEN/TS 17659 Design guideline for mechanically fastened roof waterproofing systems 3099 CEN/TC 254 Ceramic tiles -- Part 18: Ceramic tiles -- Part 18: Determination of Light 111 MDLPA 114 prEN ISO 10545-18 3099 CEN/TC 67 Reflectance Value (LRV) Building construction - Sealants - Determination of adhesion/cohesion 112 MDLPA 114 prEN ISO 10591 rev 3099 CEN/SS B02 properties of sealants after immersion in water Building construction - Sealants - Determination of resistance to compres- 113 MDLPA 114 prEN ISO 11432 rev 3099 CEN/SS B02 sion 114 MDLPA 114 prEN 15434-1 Bonding sealants - Part 1: Bonded glazing sealants 4020 CEN/TC 349 115 MDLPA 115 prEN 1467 Natural stone - Rough blocks - Requirements 4010 CEN/TC 246

55 116 MDLPA 115 prEN 1468 Natural stone - Rough slabs - Requirements 4010 CEN/TC 246 Natural stone test methods - Determination of flexural strength under 117 MDLPA 115 prEN 12372 4020 CEN/TC 246 concentrated load Natural stone test methods - Determination of sensitivity to accidental 118 MDLPA 115 EN 16301:2021 5020 CEN/TC 246 staining Glass in building - Assessment of release of dangerous substances - Deter- 119 MDLPA 122 EN 17416:2021 5020 CEN/TC 129 mination of emissions into indoor air from glass products Glass in buildig - Shatter properties - Requirements and assessment 120 MDLPA 122 prEN 17635 4020 CEN/TC 129 methods Low-voltage electrical installations - Part 7-710: Requirements for special 121 MDLPA 136 FprHD 60364-7-710:2021 5020 CLC/TC 64 installations or locations - Medical locations HD 60364-5-54:2011/ Low-voltage electrical installations - Part 5-54: Selection and erection of 122 MDLPA 136 5020 CLC/TC 64 FprA1:2021 electrical equipment - Earthing arrangements and protective conductors FprHD 60364-7-710:2021/ Low voltage electrical installations - Part 7-710: Requirements for special 123 MDLPA 136 5020 CLC/TC 64 FprAA installations or locations - Medical locations Low-voltage electrical installations - Part 7-730: Requirements for special 124 MDLPA 136 prHD 60364-7-730 installations or locations - Onshore units of electrical shore connections 3099 CLC/TC 64 for inland navigation vessels 125 MDLPA 186 prEN 12255-10 rev Wastewater treatment plants - Part 10: Safety principles 3099 CEN/TC 165 126 MDLPA 186 prEN 12255-11 rev Wastewater treatment plants - Part 11: General data required 3099 CEN/TC 165 Wastewater treatment plants - Part 13: Chemical treatment - Treatment of 127 MDLPA 186 prEN 12255-13 rev 3099 CEN/TC 165 wastewater by precipitation/flocculation 128 MDLPA 186 prEN 12255-6 rev Wastewater treatment plants - Part 6: Activated sludge process 3099 CEN/TC 165 Road marking materials - Retroreflecting road studs - Part 2: Road test 129 MDLPA 187 FprEN 1463-2 5020 CEN/TC 226 performance specifications 130 MDLPA 187 prEN 1790 Road marking materials - Preformed road markings 4020 CEN/TC 226 Bituminous mixtures - Test methods - Part 7: Determination of the bulk 131 MDLPA 187 prEN 12697-7 4020 CEN/TC 227 density of bituminous specimens by gamma rays Bituminous mixtures - Test methods - Part 15: Determination of the segre- 132 MDLPA 187 prEN 12697-15 4020 CEN/TC 227 gation sensitivity Bituminous mixtures - Test methods - Part 36: Determination of the thick- 133 MDLPA 187 prEN 12697-36 4020 CEN/TC 227 ness of bituminous pavement Bituminous mixtures - Test methods - Part 38: Common equipment and 134 MDLPA 187 prEN 12697-38 4020 CEN/TC 227 calibration Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhe- 135 MDLPA 187 prEN 12697-37 4020 CEN/TC 227 sivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA) 136 MDLPA 187 prEN 12697-41 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids 4020 CEN/TC 227 Bitumen and bituminous binders - Determination of settling tendency of 137 MDLPA 187 prEN 12847 4020 CEN/TC 336 bituminous emulsions Bitumen and bituminous binders - Determination of the pH value of 138 MDLPA 187 prEN 12850 4020 CEN/TC 336 bituminous emulsions Unbound and hydraulically bound mixtures - Part 1: Test methods for 139 MDLPA 187 prEN 13286-1 laboratory reference density and water content - Introduction, general 4020 CEN/TC 227 requirements and sampling Unbound and hydraulically bound mixtures - Part 41: Test method for 140 MDLPA 187 prEN 13286-41 the determination of the compressive strength of hydraulically bound 4020 CEN/TC 227 mixtures Unbound and hydraulically bound mixtures - Part 47: Test method for the 141 MDLPA 187 prEN 13286-47 determination of California bearing ratio, immediate bearing index and 4020 CEN/TC 227 linear swelling Unbound and hydraulically bound mixtures - Part 4: Test methods for 142 MDLPA 187 prEN 13286-4 4020 CEN/TC 227 laboratory reference density and water content - Vibrating hammer Bitumen and bituminous binders - Determination of adhesivity of bitumi- 143 MDLPA 187 EN 13614:2021 5020 CEN/TC 336 nous emulsions by water immersion test Bitumen and bituminous binders - Determination of equi-shear modulus 144 MDLPA 187 prEN 17643 4020 CEN/TC 336 temperature using a Dynamic Shear Rheometer (DSR) - BTSV test 145 MDLPA 240 FprEN 12464-1 Light and lighting - Lighting of work places - Part 1: Indoor work places 5020 CEN/TC 169 146 MDLPA 240 FprCEN/TS 17623 BIM Properties for lighting - Luminaires and sensing devices 5020 CEN/TC 169 Acoustics - Measurement of room acoustic parameters - Part 3: Open plan 147 MDLPA 276 prEN ISO 3382-3 4020 CEN/TC 126 offices (ISO/DIS 3382-3:2021) Acoustics - Laboratory measurement of sound insulation of building 148 MDLPA 276 FprEN ISO 10140-5 elements - Part 5: Requirements for test facilities and equipment (ISO/ 5020 CEN/TC 126 FDIS 10140-5:2021) Acoustics - Laboratory measurement of sound insulation of building 149 MDLPA 276 FprEN ISO 10140-1 elements - Part 1: Application rules for specific products (ISO/FDIS 10140- 5020 CEN/TC 126 1:2021)

56 Acoustics - Laboratory measurement of sound insulation of building 150 MDLPA 276 FprEN ISO 10140-3 elements - Part 3: Measurement of impact sound insulation (ISO/FDIS 5020 CEN/TC 126 10140-3:2021) Acoustics - Laboratory measurement of sound insulation of building 151 MDLPA 276 FprEN ISO 10140-2 elements - Part 2: Measurement of airborne sound insulation (ISO/FDIS 5020 CEN/TC 126 10140-2:2021) Acoustics - Laboratory measurement of sound insulation of building 152 MDLPA 276 FprEN ISO 10140-4 elements - Part 4: Measurement procedures and requirements (ISO/FDIS 5020 CEN/TC 126 10140-4:2021) Thermal insulation for building equipment and industrial installations - 153 MDLPA 281 prEN ISO 12241 4020 CEN/TC 89 Calculation rules (ISO/DIS 12241:2021) Hygrothermal performance of building materials and products - Determi- 154 MDLPA 281 prEN ISO 12571 4020 CEN/TC 89 nation of hygroscopic sorption properties (ISO/DIS 12571:2020) Water based surface embedded heating and cooling systems - Part 2: 155 MDLPA 302 FprEN 1264-2 Floor heating: Methods for the determination of the thermal output using 5020 CEN/TC 130 calculations and experimental tests Water based surface embedded heating and cooling systems - Part 3: 156 MDLPA 302 FprEN 1264-3 5020 CEN/TC 130 Dimensioning Water based surface embedded heating and cooling systems - Part 1: 157 MDLPA 302 FprEN 1264-1 5020 CEN/TC 130 Definitions and symbols Water based surface embedded heating and cooling systems - Part 5: 158 MDLPA 302 FprEN 1264-5 Determination of the thermal output for wall and ceiling heating and for 5020 CEN/TC 130 floor, wall and ceiling cooling Water based surface embedded heating and cooling systems - Part 4: 159 MDLPA 302 FprEN 1264-4 5020 CEN/TC 130 Installation Energy performance of buildings - Method for calculation of the design 160 MDLPA 302 EN 12831-3:2017/prA1 heat load - Part 3: Domestic hot water systems heat load and characterisa- 3099 CEN/TC 228 tion of needs, Module M8-2, M8-3 Ventilation for buildings - Performance testing of components/products 161 MDLPA 302 prEN 13141-8 for residential ventilation - Part 8: Performance testing of non-ducted 4020 CEN/TC 156 mechanical supply and exhaust ventilation units (including heat recovery) District heating pipes - Design and installation of thermal insulated bond- 162 MDLPA 302 EN 13941-1:2019/prA1 ed single and twin pipe systems for directly buried hot water networks 4010 CEN/TC 107 - Part 1: Design District heating pipes - Design and installation of thermal insulated bond- 163 MDLPA 302 EN 13941-2:2019/prA1 ed single and twin pipe systems for directly buried hot water networks 4010 CEN/TC 107 - Part 2: Installation District heating pipes - Factory made flexible pipe systems - Part 4: Bond- 164 MDLPA 302 prEN 15632-4 4020 CEN/TC 107 ed system with metal service pipes; requirements and test methods District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classi- 165 MDLPA 302 prEN 15632-1 4020 CEN/TC 107 fication, general requirements and test methods District heating pipes - Factory made flexible pipe systems - Part 3: Non 166 MDLPA 302 prEN 15632-3 4020 CEN/TC 107 bonded system with plastic service pipes; requirements and test methods District heating pipes - Factory made flexible pipe systems - Part 2: Bond- 167 MDLPA 302 prEN 15632-2 4020 CEN/TC 107 ed system with plastic service pipes; requirements and test methods 168 MDLPA 302 prEN 15780 Ventilation for buildings - Ductwork - Cleanliness of ventilation systems 3099 CEN/TC 156 Heating systems and water based cooling systems in buildings – Design for 169 MDLPA 302 prEN 17671 3099 CEN/TC 228 water based cooling systems 170 MDLPA 302 prEN ISO 24194 Solar energy — Collector fields — Check of performance 3099 CEN/TC 312 Air intake filter systems for rotary machinery - Test methods - Part 1: 171 MDLPA 302 prEN ISO 29461-1 4020 CEN/TC 195 Static filter elements (ISO/DIS 29461-1:2020) Building hardware - Hardware for sliding doors and folding doors - Re- 172 MDLPA 318 EN 1527:2019/prA1 4020 CEN/TC 33 quirements and test methods 173 MDLPA 318 prEN 1529 Door leaves - Height, width, thickness and squareness - Tolerance classes 4020 CEN/TC 33 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 174 MDLPA 318 FprEN 1627 5020 CEN/TC 33 glar resistance - Requirements and classification Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 175 MDLPA 318 FprEN 1628 glar resistance - Test method for the determination of resistance under 5020 CEN/TC 33 static loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - Bur- 176 MDLPA 318 FprEN 1629 glar resistance - Test method for the determination of resistance under 5020 CEN/TC 33 dynamic loading Pedestrian doorsets, windows, curtain walling, grilles and shutters - 177 MDLPA 318 FprEN 1630 Burglar resistance - Test method for the determination of resistance to 5020 CEN/TC 33 manual burglary attempts Industrial, commercial and garage doors and gates - Air permeability - 178 MDLPA 318 prEN 12427 4020 CEN/TC 33 Test method Industrial, commercial and garage doors and gates - Resistance to wind 179 MDLPA 318 prEN 12444 4020 CEN/TC 33 load - Testing and calculation

57 Industrial, commercial and garage doors and gates - Resistance to water 180 MDLPA 318 prEN 12489 4020 CEN/TC 33 penetration - Test method Building hardware - Hardware for windows and door height windows - 181 MDLPA 318 EN 13126-7:2021 5020 CEN/TC 33 Requirements and test methods - Part 7: Finger catches Building hardware - Hardware for windows and door height windows - Re- 182 MDLPA 318 EN 13126-2:2021 5020 CEN/TC 33 quirements and test methods - Part 2: Window fastener handles Industrial, commercial, garage doors and gates - Product standard, perfor- 183 MDLPA 318 prEN 13241 4020 CEN/TC 33 mance characteristics Power operated pedestrian doorsets - Safety in use - Requirements and 184 MDLPA 318 prEN 16005 4020 CEN/TC 33 test methods Curtain walling - Determination of the strength of shear connections - Test 185 MDLPA 318 FprEN 16758 5020 CEN/TC 33 method and requirements Building hardware - Mechatronic door furniture - Requirements and test 186 MDLPA 318 EN 16867:2020/prA1 4020 CEN/TC 33 methods Building hardware - Environmental product declarations - Product catego- 187 MDLPA 318 prEN 17610 4020 CEN/TC 33 ry rules complementary to EN 15804 for building hardware Tests for geometrical properties of aggregates - Part 6: Assessment of 188 MDLPA 321 prEN 933-6 4020 CEN/TC 154 surface characteristics - Flow coefficient of aggregates Tests for geometrical properties of aggregates - Part 5: Determination of 189 MDLPA 321 prEN 933-5 4020 CEN/TC 154 percentage of crushed particles in coarse and all-in natural aggregates Tests for geometrical properties of aggregates - Part 11: Classification test 190 MDLPA 321 prEN 933-11 4010 CEN/TC 154 for the constituents of coarse recycled aggregate Tests for mechanical and physical properties of aggregates - Part 7: Deter- 191 MDLPA 321 prEN 1097-7 4020 CEN/TC 154 mination of the particle density of filler - Pyknometer method Tests for mechanical and physical properties of aggregates - Part 1: Deter- 192 MDLPA 321 prEN 1097-1 4010 CEN/TC 154 mination of the resistance to wear (micro-Deval) Testing hardened concrete - Part 18: Determination of the chloride migra- 193 MDLPA 321 EN 12390-18:2021 5020 CEN/TC 104 tion coefficient 194 MDLPA 321 prEN 14487-1 Sprayed concrete - Part 1: Definitions, specifications and conformity 4010 CEN/TC 104 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate 195 MDLPA 321 prEN 14488-3 3099 CEN/TC 104 and residual) of fibre reinforced beam specimens Execution of steel structures and aluminium structures - Environmental Product Declarations - Product category rules complementary to EN 196 MDLPA 326 prEN 17662 4010 CEN/TC 135 15804 for Steel, Iron and Aluminium structural products for use in con- struction works. Sustainability of construction works - Environmental product declarations 197 MDLPA 335 prEN 15942 4020 CEN/TC 350 - Communication format business-to-business Building Information Modelling (BIM) - Semantic Modelling and Linking 198 MDLPA 335 prEN 17632 4020 CEN/TC 442 (SML) Guideline for the implementation of BIM Execution Plans (BEP) and 199 MDLPA 335 FprCEN/TR 17654 Exchange Information Requirements (EIR) on European level based on EN 5020 CEN/TC 442 ISO 19650-1 and -2 Sustainability in buildings and civil engineering works - Data templates for 200 MDLPA 335 prEN ISO 22057 4020 CEN/TC 350 the use of EPDs for construction products in BIM (ISO/DIS 22057:2021) 201 MDLPA 343 prEN 1990 Eurocode - Basis of structural and geotechnical design 3099 CEN/TC 250 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on 202 MDLPA 343 prEN 1991-1-2 rev 3099 CEN/TC 250 structures exposed to fire Eurocode 1. Actions on structures. Traffic loads on bridges and other civil 203 MDLPA 343 prEN 1991-2 rev 3099 CEN/TC 250 engineering works Eurocode 2: Design of concrete structures – Part 1-1: General rules, rules 204 MDLPA 343 prEN 1992-1-1 rev 3099 CEN/TC 250 for buildings, bridges and civil engineering structures 205 MDLPA 343 prEN 1993-1-8 Eurocode 3: Design of steel structures - Part 1-8: Design of joints 4020 CEN/TC 250 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation 206 MDLPA 343 prEN 1996-3 rev 3099 CEN/TC 250 methods for unreinforced masonry structures Eurocode 9: Design of aluminium structures - Part 1-1: General structural 207 MDLPA 343 prEN 1999-1-1 4010 CEN/TC 250 rules Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire 208 MDLPA 343 prEN 1999-1-2 4010 CEN/TC 250 design Eurocode 9: Design of aluminium structures - Part 1-3: Structures suscep- 209 MDLPA 343 prEN 1999-1-3 4010 CEN/TC 250 tible to fatigue Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed 210 MDLPA 343 prEN 1999-1-4 4010 CEN/TC 250 structural sheeting 211 MDLPA 343 prEN 1999-1-5 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures 4010 CEN/TC 250 212 MDLPA 343 FprCEN/TS 19100-1 Design of glass structures - Part 1: Basis of design and materials 3099 CEN/TC 250 Design of glass structures - Part 2: Design of out-of-plane loaded glass 213 MDLPA 343 FprCEN/TS 19100-2 3099 CEN/TC 250 components Design of glass structures - Part 3: Design of in-plane loaded glass compo- 214 MDLPA 343 FprCEN/TS 19100-3 3099 CEN/TC 250 nents and their mechanical joints

58 Eurocode 5: Design of Timber Structures - Structural design of timber-con- 215 MDLPA 343 FprCEN/TS 19103 3099 CEN/TC 250 crete composite structures - Common rules and rules for buildings Lightning Protection System Components (LPSC) - Part 1: Testing require- 216 MDLPA 346 CLC/FprTS 50703-1 5020 CLC/TC 81X ments for metal sheets' joints used in LPS Geotechnical investigation and testing - Laboratory testing of soil - Part 217 MDLPA 361 EN ISO 17892-12:2018/prA1 12: Determination of liquid and plastic limits - Amendment 1 (ISO 17892- 4020 CEN/TC 341 12:2018/Damd 1:2021) Geosynthetics - Determination of compression behaviour - Part 1: Com- 218 MDLPA 364 FprEN ISO 25619-1 5020 CEN/TC 189 pressive creep properties (ISO/FDIS 25619-1:2020) Accessibility and usability of the built environment - Technical perfor- 219 MDLPA 365 FprCEN/TR 17621 5020 CEN/CLC/JTC 11 mance criteria and specifications Accessibility and usability of the built environment - Conformity assess- 220 MDLPA 365 FprCEN/TR 17622 5020 CEN/CLC/JTC 11 ment Facility management - Scope, key concepts and benefits (ISO/TR 221 MDLPA 365 CEN ISO/TR 41013:2021 5020 CEN/TC 348 41013:2017) Chimneys - Requirements for metal chimneys - Part 1: System chimney 222 MDLPA 393 prEN 1856-1 rev 3099 CEN/TC 166 products Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners 223 MDLPA 393 prEN 1856-2 rev 3099 CEN/TC 166 and connecting flue pipes Free-standing chimneys - Part 9: Lifetime management - Monitoring, 224 MDLPA 393 prEN 13084-9 inspection, maintenance, remedial and reporting; Operations and actions 4010 CEN/TC 297 required 225 MEAT 1 prEN IEC 60034-9:2021 Rotating electrical machines - Part 9: Noise limits 4020 CLC/TC 2 Rotating electrical machines - Test methods and apparatus for the mea- 226 MEAT 1 FprEN IEC 60773:2021 5020 CLC/TC 2 surement of the operational characteristics of brushes Identification by hour numbers of the phase conductors of 3-phase elec- 227 MEAT 2 prEN IEC 60152:2020 4020 CLC/SR 3 tric systems Basic and safety principles for man-machine interface, marking and iden- 228 MEAT 2 prEN IEC 60445:2020 tification - Identification of equipment terminals, conductor terminations 4020 CLC/SR 3 and conductors Industrial systems, installations and equipment and industrial products - 229 MEAT 2 prEN IEC 81346-1:2020 4020 CLC/SR 3 Structuring principles and reference designations - Part 1: Basic rules Power transformers - Additional European requirements - Part 3-4: Large 230 MEAT 3 prEN 50708-3-4 4020 CLC/TC 14 power transformer - Special tests for corrugated tank and radiators Electrical insulating materials used under severe ambient conditions - Test 231 MEAT 5 prEN 60587:2020 4020 CLC/SR 112 methods for evaluating resistance to tracking and erosion Dielectric and resistive properties of solid insulating materials - Part 3-1: 232 MEAT 5 prEN IEC 62631-3-1:2020 Determination of resistive properties (DC methods) - Volume resistance 4020 CLC/SR 112 and volume resistivity - General method High-voltage switchgear and controlgear - Part 1: Common specifications 233 MEAT 8 EN 62271-1:2017/prA1:2020 4020 CLC/TC 17AC for alternating current switchgear and controlgear High-voltage switchgear and controlgear - Part 1: Common specifications 234 MEAT 8 EN 62271-1:2017/prA1:2020 4020 CLC/TC 17AC for alternating current switchgear and controlgear High-voltage switchgear and controlgear - Part 106: Alternating current 235 MEAT 8 FprEN IEC 62271-106:2021 5020 CLC/TC 17AC contactors, contactor-based controllers and motor-starters High-voltage switchgear and controlgear - Part 200: AC metal-enclosed 236 MEAT 8 FprEN IEC 62271-200:2021 switchgear and controlgear for rated voltages above 1 kV and up to and 5020 CLC/TC 17AC including 52 kV High-voltage switchgear and controlgear - Part 103: Switches for rated 237 MEAT 8 FprEN IEC 62271-103:2021 5020 CLC/TC 17AC voltages above 1 kV up to and including 52 kV High-voltage switchgear and controlgear - Part 203: Gas-insulated met- 238 MEAT 8 prEN IEC 62271-203:2021 4020 CLC/TC 17AC al-enclosed switchgear for rated voltages above 52 kV Amendment 1 - High-voltage switchgear and controlgear - Part 209: Cable EN IEC 62271-209:2019/ connections for gasinsulated metal-enclosed switchgear for rated voltages 239 MEAT 8 4020 CLC/TC 17AC prA1:2021 above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations Low-voltage switchgear and controlgear - Part 6-1: Multiple function equip- 240 MEAT 9 FprEN IEC 60947-6-1:2020 5020 CLC/TC 121A ment - Transfer switching equipment EN IEC 60947-5-2:2020/ Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices 241 MEAT 9 4020 CLC/TC 121A prAA and switching elements - Proximity switches Low-voltage switchgear and controlgear - Part 9-2: Active arc-fault mitiga- 242 MEAT 9 FprEN IEC 60947-9-2:2021 5020 CLC/TC 121A tion systems - Optical-based internal arc-detection and mitigation devices Conduit systems for cable management - Part 21: Particular requirements 243 MEAT 11 FprEN IEC 61386-21:2021 5020 CLC/TC 213 - Rigid conduit systems Conduit systems for cable management - Part 23: Particular requirements 244 MEAT 11 FprEN IEC 61386-23:2021 5020 CLC/TC 213 - Flexible conduit systems Conduit Systems for cable management - Part 22: Particular requirements 245 MEAT 11 FprEN IEC 61386-22:2021 5020 CLC/TC 213 - Pliable conduit systems FprEN IEC 61386-23:2021/ Conduit systems for cable management - Part 23: Particular requirements 246 MEAT 11 5020 CLC/TC 213 FprAA - Flexible conduit systems

59 FprEN IEC 61386-21:2021/ Conduit systems for cable management - Part 21: Particular requirements 247 MEAT 11 5020 CLC/TC 213 FprAA - Rigid conduit systems FprEN IEC 61386-22:2021/ Conduit Systems for cable management - Part 22: Particular requirements 248 MEAT 11 5020 CLC/TC 213 FprAA - Pliable conduit systems 249 MEAT 11 EN 61534-1:2011/prAA Powertrack systems - Part 1: General requirements 4020 CLC/TC 213 Devices for the connection of luminaires for household and similar pur- 250 MEAT 11 EN 61995-1:2008/A11:2021 5020 CLC/TC 23BX poses - Part 1: General requirements Type F and type B residual current operated circuit-breakers with and 251 MEAT 11 EN 62423:2012/A11:2021 5020 CLC/TC 23E without integral overcurrent protection for household and similar uses EN 60269-6:2011/ Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for 252 MEAT 12 5020 CLC/SR 32B FprA1:2021 the protection of solar photovoltaic energy systems 253 MEAT 15 prEN 50336 Bushings for transformers and reactor cable boxes not exceeding 36 kV 4020 CLC/TC 36A Nuclear energy - Fuel technology - Trunnion systems for packages used to 254 MEAT 16 prEN ISO 10276 4010 CEN/TC 430 transport radioactive material (ISO 10276:2019) Measurement of radioactivity in the environment - Air: radon 222 - Part 12: Determination of the diffusion coefficient in waterproof materials: 255 MEAT 16 FprCEN ISO/TS 11665-12 5020 CEN/TC 430 membrane one-side activity concentration measurement method (ISO/TS 11665-12:2018) Radiological protection - Monitoring and internal dosimetry for specific 256 MEAT 16 prEN ISO 16638-2 4010 CEN/TC 430 materials - Part 2: Ingestion of uranium compounds (ISO 16638-2:2019) Nuclear facilities - Criteria for design and operation of confinement sys- 257 MEAT 16 prEN ISO 16647 tems for nuclear worksite and for nuclear installations under decommis- 4010 CEN/TC 430 sioning (ISO 16647:2018) Essential technical requirements for mechanical components and metallic 258 MEAT 16 prEN ISO 18229 4010 CEN/TC 430 structures foreseen for Generation IV nuclear reactors (ISO 18229:2018) Measurement of radioactivity in the environment - Soil - Part 1: General 259 MEAT 16 prEN ISO 18589-1 4010 CEN/TC 430 guidelines and definitions (ISO 18589-1:2019) Measurement of radioactivity in the environment - Soil - Part 4: Plutonium 260 MEAT 16 prEN ISO 18589-4 238 and plutonium 239 + 240 - Test method using alpha spectrometry (ISO 4010 CEN/TC 430 18589-4:2019) Measurement of radioactivity in the environment - Soil - Part 5: Strontium 261 MEAT 16 prEN ISO 18589-5 90 - Test method using proportional counting or liquid scintillation count- 4010 CEN/TC 430 ing (ISO 18589-5:2019) Measurement of radioactivity in the environment - Soil - Part 6: Gross 262 MEAT 16 prEN ISO 18589-6 alpha and gross beta activities - Test method using gas-flow proportional 4010 CEN/TC 430 counting (ISO 18589-6:2019) Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear 263 MEAT 16 prEN ISO 19443 4010 CEN/TC 430 energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018) Radiological protection - Monitoring and dosimetry for internal exposures 264 MEAT 16 prEN ISO 20031 4010 CEN/TC 430 due to wound contamination with radionuclides (ISO 20031:2020) Measurement of radioactivity - Gamma-ray emitting radionuclides - Ge- 265 MEAT 16 prEN ISO 20042 4010 CEN/TC 430 neric test method using gamma-ray spectrometry (ISO 20042:2019) Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: 266 MEAT 16 prEN ISO 20785-4 4010 CEN/TC 430 Validation of codes (ISO 20785-4:2019) Dosimetry with radiophotoluminescent glass dosimeters for dosimetry 267 MEAT 16 prEN ISO 22127 4010 CEN/TC 430 audit in MV X-ray radiotherapy (ISO 22127:2019) Radiation protection - Dose assessment for the monitoring of workers for 268 MEAT 16 prEN ISO 27048 4020 CEN/TC 430 internal radiation exposure (ISO 27048:2011) 269 MEAT 16 prEN IEC/IEEE 60980-344 Nuclear facilities - Equipment important to safety - Seismic qualification 4020 CLC/TC 45AX Nuclear power plants - Instrumentation, control and electrical power sys- 270 MEAT 16 prEN IEC 61226 tems important to safety - Categorization of functions and classification 4020 CLC/TC 45AX of systems Nuclear power plants - Instrumentation and control important to safety 271 MEAT 16 prEN IEC/IEEE 62582-6 - Electrical equipment condition monitoring methods - Part 6: Insulation 4020 CLC/TC 45AX resistance Nuclear power plants - Electrical power systems - Electrical power systems 272 MEAT 16 prEN IEC 62855 4020 CLC/TC 45AX analysis Nuclear power plants - Control rooms - Requirements for emergency 273 MEAT 16 prEN IEC 62954 4020 CLC/TC 45AX response facilities 274 MEAT 16 prEN IEC 63046 Nuclear power plants - Electrical power system - General requirements 4020 CLC/TC 45AX Semiconductor devices - Mechanical and climatic test methods - Part 37: 275 MEAT 17 prEN IEC 60749-37:2020 4020 CLC/SR 47 Board level drop test method using an accelerometer Semiconductor devices - Mechanical and climatic test methods - Part 276 MEAT 17 prEN IEC 60749-39:2020 39: Measurement of moisture diffusivity and water solubility in organic 4020 CLC/SR 47 materials used for semiconductor components

60 Semiconductor devices - Mechanical and climatic test methods - Part 28: 277 MEAT 17 prEN IEC 60749-28:2020 Electrostatic discharge (ESD) sensitivity testing - Charged device model 4020 CLC/SR 47 (CDM) - device level Integrated circuits - EMC evaluation of transceivers - Part 5: Ethernet 278 MEAT 17 FprEN IEC 62228-5:2021 5020 CLC/SR 47A transceivers Electronic components - Long-term storage of electronic semiconductor 279 MEAT 17 prEN IEC 62435-9:2020 4020 CLC/SR 47 devices - Part 9: Special Cases Semiconductor devices - Semiconductor devices for wireless power trans- 280 MEAT 17 prEN IEC 63244-1:2020 4020 CLC/SR 47 fer and charging - Part 1 : General requirements and specifications Semiconductor devices - Reliability test method for silicon carbide discrete 281 MEAT 17 prEN IEC 63275-1:2021 metal-oxide semiconductor field effect transistors - Part 1: Test method 4020 CLC/SR 47 for bias temperature instability Semiconductor devices - Reliability test method for silicon carbide discrete 282 MEAT 17 prEN IEC 63275-2:2021 metal-oxide semiconductor field effect transistors - Part 2: Test method 4020 CLC/SR 47 for bipolar degradation due to body diode operation Semiconductor devices - Reliability test method by inductive load switch- 283 MEAT 17 prEN IEC 63284:2021 4020 CLC/SR 47 ing for gallium nitride transistors Measurement of quartz crystal unit parameters - Part 6: Measurement of 284 MEAT 18 prEN IEC 60444-6:2020 4020 CLC/SR 49 drive level dependence (DLD) 285 MEAT 18 prEN IEC 63041-1:2021 Piezoelectric sensors - Part 1: Generic specifications 4020 CLC/SR 49 286 MEAT 19 FprEN IEC 60068-2-13:2020 Environmental testing - Part 2-13: Tests - Test M: Low air pressure 5020 CLC/SR 104 287 MEAT 19 FprEN IEC 60068-2-11:2020 Environmental testing - Part 2-11: Tests - Test Ka: Salt mist 5020 CLC/SR 104 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite tempera- 288 MEAT 19 FprEN IEC 60068-2-38:2021 5020 CLC/SR 104 ture/humidity cyclic test Determination of certain substances in electrotechnical products - Part 289 MEAT 19 prEN IEC 62321-10:2020 10: Polycyclic aromatic hydrocarbons (PAHs) in polymers and electronics 4020 CLC/TC 111X by gas chromatography-mass spectrometry (GC-MS) Determination of certain substances in electrotechnical products - Part 290 MEAT 19 prEN IEC 62321-3-2:2020 3-2: Screening - Fluorine, chlorine and bromine in polymers and electron- 4020 CLC/TC 111X ics by combustion-ion chromatography (C-IC) Magnetic materials - Part 6: Methods of measurement of the magnetic EN IEC 60404-6:2018/ 291 MEAT 20 properties of magnetically soft metallic and powder materials at frequen- 4020 CLC/SR 68 prA1:2020 cies in the range 20 Hz to 100 kHz by the use of ring specimens Specifications for particular types of winding wires – Part 84: Polyesterim- 292 MEAT 21 prEN IEC 60317-84:2020 4020 CLC/TC 55 ide enamelled round copper wire, class 200 293 MEAT 21 prEN IEC 60851-1:2020 Winding wires - Test methods - Part 1: General 4020 CLC/TC 55 Robotics - Safety requirements for robot systems in an industrial environ- 294 MEAT 23 prEN ISO 10218-2 ment - Part 2: Robot systems, robot applications and robot cells integra- 4020 CEN/TC 310 tion (ISO/DIS 10218-2:2020) Safety of machinery - Electrical equipment of machines - Part 1: General 295 MEAT 23 EN 60204-1:2018/prA1:2020 4020 CLC/TC 44X requirements Thermocouples - Part 3: Extension and compensating cables - Tolerances 296 MEAT 23 FprEN IEC 60584-3:2020 5020 CLC/TC 65X and identification system Industrial platinum resistance thermometers and platinum temperature 297 MEAT 23 prEN IEC 60751:2020 4020 CLC/TC 65X sensors Industrial communication networks - Profiles - Part 3-X: Functional safety 298 MEAT 23 FprEN IEC 61784-3-X:2021 5020 CLC/TC 65X fieldbuses - Additional specifications for CPF X EN IEC 61918:2018/ Industrial communication networks - Installation of communication net- 299 MEAT 23 4020 CLC/TC 65X prA1:2021 works in industrial premises 300 MEAT 23 FprEN IEC 62061:2020 Safety of machinery - Functional safety of safety-related control systems 5020 CLC/TC 44X 301 MEAT 23 CLC IEC/FprTR 62541-1 OPC unified architecture - Part 1: Overview and concepts 5020 CLC/TC 65X 302 MEAT 23 CLC IEC/FprTR 62541-2 OPC unified architecture - Part 2: Security Model 5020 CLC/TC 65X 303 MEAT 23 prEN IEC 62682:2020 Management of alarms systems for the process industries 4020 CLC/TC 65X Engineering data exchange format for use in industrial automation 304 MEAT 23 prEN IEC 62714-2:2020 systems engineering - Automation markup language - Part 2: Semantics 4020 CLC/TC 65X libraries Safety requirements for electrical equipment for measurement, control 305 MEAT 24 prEN 61010-2-051:2017/prAA and laboratory use - Part 2-051: Particular requirements for laboratory 4020 CLC/TC 66X equipment for mixing and stirring Safety requirements for electrical equipment for measurement, control 306 MEAT 24 prEN 61010-2-061:2017/prAA and laboratory use - Part 2-061: Particular requirements for laboratory 4020 CLC/TC 66X atomic spectrometers with thermal atomization and ionization Safety requirements for electrical equipment for measurement, control FprEN IEC 61010-2- 307 MEAT 24 and laboratory use - Part 2-091: Particular requirements for cabinet X-ray 4020 CLC/TC 66X 091:2018/prAA systems Safety requirements for electrical equipment for measurement, control, prEN IEC 61010-2-011:2018/ 308 MEAT 24 and laboratory use - Part 2-011: Particular requirements for refrigerating 4020 CLC/TC 66X prAA equipment

61 Safety requirements for electrical equipment for measurement, control, 309 MEAT 24 FprEN IEC 61010-2-130:2020 and laboratory use - Particular requirements for equipment intended to be 5020 CLC/TC 66X used in educational establishments by children Safety requirements for electrical equipment for measurement, control, EN IEC 61010-2-030:2021/ 310 MEAT 24 and laboratory use - Part 2-030: Particular requirements for equipment 5020 CLC/TC 66X A11:2021 having testing or measuring circuits Safety requirements for electrical equipment for measurement, control, EN IEC 61010-2-034:2021/ and laboratory use - Part 2-034: Particular requirements for measure- 311 MEAT 24 5020 CLC/TC 66X A11:2021 ment equipment for insulation resistance and test equipment for electric strength Electroacoustics - Simulators of human head and ear - Part 7: Head and 312 MEAT 26 prEN IEC 60318-7:2021 4020 CLC/SR 29 torso simulator for the measurement of sound sources close to the ear Electroacoustics - Simulators of human head and ear - Part 7: Head and 313 MEAT 26 prEN IEC 60318-7:2021 4020 CLC/SR 29 torso simulator for the measurement of sound sources close to the ear 314 MEAT 27 prEN 15602 Security service providers - Terminology 4020 CEN/TC 439 Private security provision for the protection of Critical Infrastructure - Part 315 MEAT 27 FprEN 17483-1 5020 CEN/TC 439 1: General requirements 316 MEAT 27 EN 50131-6:2017/prA1 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies 4020 CLC/TC 79 Alarm systems - Intrusion and hold-up systems - Part 2-2: Requirements 317 MEAT 27 prEN 50131-2-2 4020 CLC/TC 79 for passive infrared detectors Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements 318 MEAT 27 prEN 50131-2-3 3099 CLC/TC 79 for microwave detectors Alarm systems - Alarm transmission systems and equipment - Part 3: 319 MEAT 27 EN 50136-3:2013/FprA1 5020 CLC/TC 79 Requirements for Receiving Centre Transceiver (RCT) 320 MEAT 27 EN 62820-1-1:2016/prAA Building intercom systems - Part 1-1: System requirements - General 4010 CLC/TC 79 Degrees of protection provided by enclosures for electrical equipment 321 MEAT 29 EN 62262:2002/prA1:2020 4020 CLC/SR 70 against external mechanical impacts (IK code) Electromagnetic compatibility - Radio frequency emission - Statistical 322 MEAT 30 prEN 50715 considerations in the determination of compliance for mass-produced 3099 CLC/TC 210 products with emission requirements Safety in installations for electroheating and electromagnetic process- 323 MEAT 31 prEN 60519-6:2020 ing - Part 6: Particular requirements for high frequency dielectric and 4020 CLC/SR 27 microwave heating and processing equipment Safety in electroheating installations - Part 4: Particular requirements for 324 MEAT 31 prEN IEC 60519-4:2021 4020 CLC/SR 27 arc furnace installations Safety in electroheating installations - Part 4: Particular requirements for 325 MEAT 31 prEN IEC 60519-4:2021 4020 CLC/SR 27 arc furnace installations Superconductivity - Part 17: Electronic characteristic measurements - 326 MEAT 34 FprEN IEC 61788-17:2021 Local critical current density and its distribution in large-area supercon- 5020 CLC/SR 90 ducting films Terrestrial photovoltaic (PV) modules - Design qualification and type 327 MEAT 35 FprEN IEC 61215-1-4:2020 approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA) 5020 CLC/TC 82 (S,Se)2 based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 328 MEAT 35 FprEN IEC 61215-2:2020 5020 CLC/TC 82 approval - Part 2: Test procedures Terrestrial photovoltaic (PV) modules - Design qualification and type 329 MEAT 35 FprEN IEC 61215-1:2020 5020 CLC/TC 82 approval - Part 1: Test requirements Terrestrial photovoltaic (PV) modules - Design qualification and type 330 MEAT 35 FprEN IEC 61215-1-2:2020 approval - Part 1-2: Special requirements for testing of thin-film Cadmium 5020 CLC/TC 82 Telluride (CdTe) based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type ap- 331 MEAT 35 FprEN IEC 61215-1-3:2020 proval - Part 1-3: Special requirements for testing of thin-film amorphous 5020 CLC/TC 82 silicon based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 332 MEAT 35 FprEN IEC 61215-1-1:2020 approval - Part 1-1: Special requirements for testing of crystalline silicon 5020 CLC/TC 82 photovoltaic (PV) modules 333 MEAT 35 EN 61400-13:2016/prA1:2021 Wind turbines - Part 13: Measurement of mechanical loads 4020 CLC/TC 88 334 MEAT 35 prEN IEC 61724-1:2020 Photovoltaic system performance - Part 1: Monitoring 4020 CLC/TC 82 EN IEC 61730-2:2018/ Photovoltaic (PV) module safety qualification - Part 2: Requirements for 335 MEAT 35 4020 CLC/TC 82 prA1:2020 testing EN IEC 61730-1:2018/ Photovoltaic (PV) module safety qualification - Part 1: Requirements for 336 MEAT 35 4020 CLC/TC 82 prA1:2020 construction Measurement procedures for materials used in photovoltaic modules - 337 MEAT 35 prEN IEC 62788-2-1:2020 Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety require- 4020 CLC/TC 82 ments Measurement procedures for materials used in photovoltaic modules 338 MEAT 35 prEN IEC 62788-7-3:2021 - Part 7-3: Environmental exposures - Accelerated abrasion tests of PV 4020 CLC/TC 82 module external surfaces

62 Amendment 1 - Photovoltaic power generating systems - EMC require- 339 MEAT 35 EN 62920:2017/FprA1:2021 5020 CLC/TC 82 ments and test methods for power conversion equipment Thyristor valves for high voltage direct current (HVDC) power transmission 340 MEAT 36 EN 60700-1:2015/prA1:2021 4020 CLC/TC 22X - Part 1: Electrical testing Thyristor valves for high voltage direct current (HVDC) power transmission 341 MEAT 36 EN 60700-2:2016/prA1:2021 4020 CLC/TC 22X - Part 2: Terminology Adjustable speed electrical power drive systems - Part 5-3: Safety re- 342 MEAT 36 FprEN IEC 61800-5-3:2020 quirements - Functional, electrical and environmental requirements for 5020 CLC/TC 22X encoders Adjustable speed electrical power drive systems - Part 5-1: Safety require- 343 MEAT 36 prEN IEC 61800-5-1:2020 4020 CLC/TC 22X ments - Electrical, thermal and energy Adjustable speed electrical power drive systems - Part 2: General re- 344 MEAT 36 FprEN IEC 61800-2:2020 quirements - Rating specifications for adjustable speed a.c. power drive 5020 CLC/TC 22X systems 345 MEAT 36 prEN IEC 61954:2021 Static var compensators (SVC) - Testing of thyristor valves 4020 CLC/TC 22X Uninterruptible power systems (UPS) - Part 3: Method of specifying the 346 MEAT 36 FprEN IEC 62040-3:2021 5020 CLC/TC 22X performance and test requirements Safety requirements for power electronic converter systems and equip- 347 MEAT 36 prEN IEC 62477-1:2020 4020 CLC/TC 22X ment - Part 1: General Series capacitors for power systems - Part 2: Protective equipment for 348 MEAT 37 EN 60143-2:2013/prA1:2021 4020 CLC/SR 33 series capacitor banks Shunt power capacitors of the self-healing type for AC systems having a 349 MEAT 37 FprEN IEC 63210:2020 5020 CLC/SR 33 rated voltage above 1 000 V Resistance welding equipment - Electrode taper fits for spot welding 350 MEAT 39 prEN ISO 1089 4020 CEN/TC 121 equipment - Dimensions (ISO/DIS 1089:2021) Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to 351 MEAT 39 prEN ISO 3834-5 4020 CEN/TC 121 the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO/DIS 3834-5:2020) Quality requirements for fusion welding of metallic materials - Part 4: 352 MEAT 39 prEN ISO 3834-4 4020 CEN/TC 121 Elementary quality requirements (ISO/FDIS 3834-4:2020) Quality requirements for fusion welding of metallic materials - Part 1: 353 MEAT 39 prEN ISO 3834-1 Criteria for the selection of the appropriate level of quality requirements 4020 CEN/TC 121 (ISO/DIS 3834-1:2020) Quality requirements for fusion welding of metallic materials - Part 3: 354 MEAT 39 prEN ISO 3834-3 4020 CEN/TC 121 Standard quality requirements (ISO/FDIS 3834-3:2020) Quality requirements for fusion welding of metallic materials - Part 2: 355 MEAT 39 prEN ISO 3834-2 4020 CEN/TC 121 Comprehensive quality requirements (ISO/FDIS 3834-2:2020) Welding, brazing, soldering, cutting, mechanical joining and adhesive 356 MEAT 39 prEN ISO 4063 bonding - Nomenclature of processes and reference numbers (ISO/DIS 4020 CEN/TC 121 4063:2020) Destructive tests on welds in metallic materials - Bend tests (ISO/DIS 357 MEAT 39 prEN ISO 5173 4020 CEN/TC 121 5173:2021) Resistance welding equipment - Water-cooled secondary connection 358 MEAT 39 FprEN ISO 8205 cables - Dimensions and requirements for double-conductor connection 5020 CEN/TC 121 cables (ISO/FDIS 8205:2020) Gas welding equipment - Marking for equipment used for gas welding, 359 MEAT 39 EN ISO 10225:2021 4020 CEN/TC 121 cutting and allied processes (ISO 10225:2013) Non-destructive testing of welds - Acceptance levels for radiographic test- 360 MEAT 39 prEN ISO 10675-1 4020 CEN/TC 121 ing - Part 1: Steel, nickel, titanium and their alloys (ISO/DIS 10675-1:2021) Non-destructive testing of welds - Acceptance levels for radiographic 361 MEAT 39 prEN ISO 10675-2 4020 CEN/TC 121 testing - Part 2: Aluminium and its alloys Thermal spraying - Thermally sprayed coatings - Symbolic representation 362 MEAT 39 FprEN ISO 12671 5020 CEN/TC 240 on drawings (ISO/FDIS 12671:2020) 363 MEAT 39 EN ISO 13918:2018/prA1 Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 4020 CEN/TC 121 Electron and laser-beam welded joints - Requirements and recommenda- 364 MEAT 39 EN ISO 13919-2:2021 tions on quality levels for imperfections - Part 2: Aluminium, magnesium 5020 CEN/TC 121 and their alloys and pure copper (ISO 13919-2:2021) 365 MEAT 39 prEN 14717 Welding and allied processes - Environmental check list 4010 CEN/TC 121 Welding - Micro joining of second generation high temperature supercon- 366 MEAT 39 FprEN ISO 17279-3 5020 CEN/TC 121 ductors - Part 3: Test methods for joints (ISO/FDIS 17279-3:2020) Welding consumables - Tubular cored electrodes and rods for gas shielded 367 MEAT 39 EN ISO 17633:2018/prA1 and non-gas shielded metal arc welding of stainless and heat-resisting 4020 CEN/TC 121 steels - Classification - Amendment 1 (ISO 17633:2017/DAM 1:2020) Non-destructive testing of welds - Radiographic testing - Part 1: X- and 368 MEAT 39 prEN ISO 17636-1 rev 3099 CEN/TC 121 gamma-ray techniques with film Resistance welding - Vocabulary - Part 1: Spot, projection and seam weld- 369 MEAT 39 prEN ISO 17677-1 4020 CEN/TC 121 ing (ISO/FDIS 17677-1:2020)

63 Welding - Grouping systems for materials - European materials (ISO/PRF 370 MEAT 39 FprCEN ISO/TR 20172 5020 CEN/TC 121 TR 20172:2020) Destructive tests on welds in metallic materials - Hardness testing of 371 MEAT 39 EN ISO 22826:2021 narrow joints welded by laser and electron beam (Vickers and Knoop 4020 CEN/TC 121 hardness tests) (ISO 22826:2005) Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO/ 372 MEAT 39 prEN ISO 25901-2 4020 CEN/TC 121 DIS 25901-2:2021) Arc welding equipment - Part 8: Gas consoles for welding and plasma 373 MEAT 39 FprEN IEC 60974-8:2021 5020 CLC/TC 26 cutting systems 374 MEAT 39 FprEN IEC 60974-11:2021 Arc welding equipment - Part 11: Electrode holders 5020 CLC/TC 26 375 MEAT 39 FprEN IEC 60974-13:2021 Arc welding equipment - Part 13: Welding current return clamp 5020 CLC/TC 26 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant 376 MEAT 40 FprEN ISO 3452-2 5020 CEN/TC 138 materials (ISO/FDIS 3452-2:2021) Non-destructive testing - Penetrant testing - Part 1: General principles 377 MEAT 40 FprEN ISO 3452-1 5020 CEN/TC 138 (ISO/FDIS 3452-1:2021) Non-destructive testing - Qualification and certification of NDT personnel 378 MEAT 40 prEN ISO 9712 4020 CEN/TC 138 (ISO/DIS 9712:2021) Non-destructive testing - Characteristics of focal spots in industrial X-ray 379 MEAT 40 EN 12543-2:2021 systems for use in non-destructive testing - Part 2: Pinhole camera radio- 5020 CEN/TC 138 graphic method Non-destructive testing - Ultrasonic testing - Examination for loss of thick- 380 MEAT 40 EN 17290:2021 5020 CEN/TC 138 ness due to erosion and/or corrosion using the TOFD technique Non-destructive testing - Acoustic emission testing - In-service acoustic 381 MEAT 40 EN 17391:2021 emission monitoring of metallic pressure equipment and structures - 5020 CEN/TC 138 General requirements Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding CEN/TC 459/ 382 MEAT 42 prEN ISO 683-5 4020 steels (ISO 683-5:2017) SC 5 Continuously organic coated (coil coated) steel flat products - Technical CEN/TC 459/ 383 MEAT 42 prEN 10169 4010 delivery conditions SC 9 Cold reduced tinmill products - Electrolytic tinplate and electrolytic chro- CEN/TC 459/ 384 MEAT 42 prEN 10202 4020 mium/chromium oxide coated steel SC 9 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels CEN/TC 459/ 385 MEAT 42 EN 10222-4:2017/FprA1 5020 with high proof strength SC 11 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic CEN/TC 459/ 386 MEAT 42 EN 10222-2:2017/FprA1 5020 steels with specified elevated temperatures properties SC 11 Open die steel forgings for general engineering purposes - Part 2: Non-al- CEN/TC 459/ 387 MEAT 42 prEN 10250-2 4020 loy quality and special steels SC 11 Open die steel forgings for general engineering purposes - Part 3: Alloy CEN/TC 459/ 388 MEAT 42 prEN 10250-3 4020 special steels SC 11 Open die steel forgings for general engineering purposes - Part 1: General CEN/TC 459/ 389 MEAT 42 prEN 10250-1 4020 requirements SC 11 Open die steel forgings for general engineering purposes - Part 4: Stain- CEN/TC 459/ 390 MEAT 42 FprEN 10250-4 5020 less steels SC 11 Determination of the physical and mechanical properties of steels using CEN/TC 459/ 391 MEAT 42 FprEN 10373 5020 models SC 12 392 MEAT 47 prEN 1561 Founding - Grey cast irons 4020 CEN/TC 190 393 MEAT 47 prEN 16079 Founding - Compacted (vermicular) graphite cast irons 4020 CEN/TC 190 Technical drawings - Screw threads and threaded parts - Part 3: Simplified 394 MEAT 55 prEN ISO 6410-3 4020 CEN/SS F01 representation (ISO/DIS 6410-3:2020) Technical product documentation - Symbols used in technical product 395 MEAT 55 FprEN ISO 7083 5020 CEN/SS F01 documentation - Proportions and dimensions (ISO/FDIS 7083:2021) Geometrical product specifications (GPS) - Acceptance and reverification 396 MEAT 58 prEN ISO 10360-11 tests for coordinate measuring machines (CMM) - Part 11: CMMs using the 3099 CEN/TC 290 principle of computed tomography (CT) Geometrical product specifications (GPS) - Surface texture: Areal - Part 397 MEAT 58 prEN ISO 25178-700 700: Calibration, adjustment and verification of areal topography measur- 4020 CEN/TC 290 ing instruments (ISO/DIS 25178-700:2020) Plastics and rubber machines - Size reduction machines - Part 4: Safety 398 MEAT 59 EN 12012-4:2019/prA1 4010 CEN/TC 145 requirements for agglomerators Machine tools - Safety - Stationary grinding machines - Amendment 1 (ISO 399 MEAT 59 EN ISO 16089:2015/prA1 4020 CEN/TC 143 16089:2015/DAM 1:2020) Machine tools safety - Machining centres, milling machines, transfer 400 MEAT 59 prEN ISO 16090-1 4020 CEN/TC 143 machines - Part 1: Safety requirements (ISO/DIS 16090-1:2020) Fitness centres - Requirements for centre amenities and operation - Part 401 MEAT 66 prEN 17229-2 4010 CEN/TC 136 2: Requirements for supervision and staff Domestic swimming pools - Environmental performance efficiency - 402 MEAT 66 prEN 17645 Performance evaluation, methodology, and classification of the use of 4020 CEN/TC 402 outdoor pools and their equipment

64 Reciprocating internal combustion engine driven current generating sets - 403 MEAT 76 prEN ISO 8528-10 Part 10: Measurement of airborne noise by the enveloping surface method 4020 CEN/TC 270 (ISO/DIS 8528-10:2021) Agricultural machinery - Safety - Silage loading, mixing and/or chopping 404 MEAT 77 FprEN 703 5020 CEN/TC 144 and distributing machines Agricultural machinery - Safety - Part 1: General requirements - Amend- 405 MEAT 77 EN ISO 4254-1:2015/FprA1 5020 CEN/TC 144 ment 1 (ISO 4254-1:2013/FDAM 1:2021) Machinery for forestry - Safety requirements and testing for pole-mounted 406 MEAT 77 FprEN ISO 11680-2 powered pruners - Part 2: Machines for use with back-pack power source 5020 CEN/TC 144 (ISO/FDIS 11680-2:2021) Machinery for forestry - General safety requirements - Amendment 2: 407 MEAT 77 EN ISO 11850:2011/prA2 Access to operator's station and maintenance locations (ISO 11850:2011/ 4020 CEN/TC 144 DAM 2:2021) Agricultural and forestry machinery -- Environmental requirements for 408 MEAT 77 prEN ISO 16119-5 4020 CEN/TC 144 sprayers -- Part 5: Aerial spray systems Agricultural machinery - Equipment for sowing - Minimization of the envi- 409 MEAT 77 EN ISO 17962:2015/prA1 ronmental effects of fan exhaust from pneumatic systems - Amendment 1 4020 CEN/TC 144 (ISO 17962:2015/DAM 1:2020) Leisure accommodation vehicles - Caravan holiday homes - Habitation 410 MEAT 78 EN 1647:2018/prA1 4020 CEN/TC 245 requirements relating to health and safety 411 MEAT 78 FprEN 17278 Natural gas vehicles - Vehicle fuelling appliances 5020 CEN/TC 326 Road vehicles - Machines for mounting and demounting vehicle tyres - 412 MEAT 78 EN 17347:2021 5020 CEN/TC 301 Safety requirements 413 MEAT 78 EN 17406:2020/prA1 Classification for bicycles usage 4020 CEN/TC 333 Cycles - Components and assemblies used in bicycles - Innovative require- 414 MEAT 78 FprCEN/TR 17653 5020 CEN/TC 333 ments and test methods Electrically propelled road vehicles - Magnetic field wireless power trans- 415 MEAT 78 EN ISO 19363:2021 4020 CEN/TC 301 fer - Safety and interoperability requirements (ISO 19363:2020) Conveyor belts - Laboratory scale flammability characteristics - Require- 416 MEAT 84 prEN ISO 340 4020 CEN/TC 188 ments and test method (ISO/DIS 340:2020) Safety rules for the construction and installation of lifts - Special lifts for 417 MEAT 85 prEN 81-44 the transport of persons and goods - Part 44: Lifting appliances in wind 4020 CEN/TC 10 turbines Safety of escalators and moving walks - Part 2: Rules for the improvement 418 MEAT 85 FprEN 115-2 5020 CEN/TC 10 of safety of existing escalators and moving walks Rough-terrain trucks - Safety requirements and verification - Part 9: 419 MEAT 85 EN 1459-9:2021 Variable-reach trucks equipped with work platforms having a front guard 5020 CEN/TC 150 that can be opened 420 MEAT 85 prEN 1757 Safety of industrial trucks - Pedestrian controlled manual platform trucks 4020 CEN/TC 150 Industrial trucks - Safety requirements and verification - Part 6: Burden 421 MEAT 85 prEN ISO 3691-6 4020 CEN/TC 150 and personnel carriers 422 MEAT 85 EN 12385-5:2021 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts 5020 CEN/TC 168 Safety requirements for cableway installations designed to carry persons - 423 MEAT 85 EN 12929-1:2015/prA1 4020 CEN/TC 242 General requirements - Part 1: Requirements for all installations Cranes - General design - Part 3-5: Limit states and proof of competence 424 MEAT 85 EN 13001-3-5:2016/FprA1 5020 CEN/TC 147 of forged and cast hooks Cranes - General design - Part 3-6: Limit states and proof of competence 425 MEAT 85 EN 13001-3-6:2018/FprA1 5020 CEN/TC 147 of machinery - Hydraulic cylinders Safety requirements for cableway installations designed to carry persons - 426 MEAT 85 EN 13223:2015/prA1 4020 CEN/TC 242 Drive systems and other technical requirements 427 MEAT 85 prEN 13557 Cranes - Controls and control stations 4020 CEN/TC 147 428 MEAT 85 EN 13852-3:2021 Cranes - Offshore cranes - Part 3: Light offshore cranes 5020 CEN/TC 147 429 MEAT 85 prEN 13852-1 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes 4010 CEN/TC 147 430 MEAT 85 FprEN 15620 Steel static storage systems - Tolerances, deformations and clearances 5020 CEN/TC 344 Safety of machinery - Cableway installations designed for the transport of 431 MEAT 85 prEN 17639 4020 CEN/TC 242 material and specially designated persons - General safety requirements Flanges and their joints - Design rules for gasketed circular flange connec- 432 MEAT 89 prEN 1591-1 rev 3099 CEN/TC 74 tions - Part 1: Calculation Industrial valves - Actuators - Part 5: Pneumatic linear actuators for indus- 433 MEAT 89 prEN 15714-5 3099 CEN/TC 69 trial valves — Basic requirements Electric actuators for industrial valves - General requirements (ISO 434 MEAT 89 prEN ISO 22153 4020 CEN/TC 69 22153:2020) Industrial valves - Isolating valves for low-temperature applications - Part 435 MEAT 89 prEN ISO 28921-1 rev 3099 CEN/TC 69 1: Design, manufacturing and production testing Leather - Chemical determination of chromium(VI) content in leather - 436 MEAT 102 prEN ISO 10195 Thermal pre-ageing of leather and determination of hexavalent chromium 4010 CEN/TC 289 (ISO 10195:2018)

65 Leather - Upholstery leather characteristics - Guide for selection of leath- 437 MEAT 102 prEN 13336 4020 CEN/TC 289 er for furniture Leather - Leather for apparel (excluding furs) - Specifications and sam- 438 MEAT 102 FprEN ISO 14931 5020 CEN/TC 289 pling procedures (ISO/FDIS 14931:2021) Footwear - Critical substances potentially present in footwear and 439 MEAT 102 FprEN ISO 16181-1 footwear components - Part 1: Determination of phthalate with solvent 5020 CEN/TC 309 extraction (ISO/FDIS 16181-1:2020) Footwear - Critical substances potentially present in footwear and foot- 440 MEAT 102 FprEN ISO 16181-2 wear components - Part 2: Determination of phthalate without solvent 5020 CEN/TC 309 extraction (ISO/FDIS 16181-2:2021) Footwear - Critical substances potentially present in footwear and foot- 441 MEAT 102 FprEN ISO 16186 wear components - Determination of dimethyl fumarat (DMFU) (ISO/FDIS 5020 CEN/TC 309 16186:2021) Footwear - Critical substances potentially present in footwear and foot- 442 MEAT 102 prEN ISO 16189 wear components - Test method to quantitatively determine dimethylfor- 4020 CEN/TC 309 mamide in footwear materials (ISO/DIS 16189:2021) Footwear - Critical substances potentially present in footwear and foot- 443 MEAT 102 prEN ISO 16190 wear components - Test method to quantitatively determine polycyclic 4020 CEN/TC 309 aromatic hydrocarbons (PAH) in footwear materials (ISO/DIS 16190:2021) Leather - Requirements for the designation and description of leather 444 MEAT 102 prEN 16223-1 in upholstery and automotive interior applications - Part 1: upholstery 4020 CEN/TC 289 applications Leather - Requirements for the designation and description of leather 445 MEAT 102 prEN 16223-2 in upholstery and automotive interior applications - Part 2: Automotive 4020 CEN/TC 289 interior applications Leather - Physical and mechanical tests - Determination of dimensional 446 MEAT 102 FprEN ISO 17130 5020 CEN/TC 289 change (ISO/FDIS 17130:2020) Leather - Chemical determination of formaldehyde content - Part 1: Meth- 447 MEAT 102 FprEN ISO 17226-1 5020 CEN/TC 289 od using high-performance liquid chromatography (ISO/FDIS 17226-1:2020) 448 MEAT 102 prEN 17651 Leather - Labelling of leather goods products 4010 CEN/TC 289 Leather - Determination of chlorinated hydrocarbons in leather - Part 1: 449 MEAT 102 FprEN ISO 18219-1 Chromatographic method for short-chain chlorinated paraffins (SCCPs) 5020 CEN/TC 289 (ISO/FDIS 18219-1:2021) Leather - Determination of chlorinated hydrocarbons in leather – Part 2: 450 MEAT 102 FprEN ISO 18219-2 Chromatographic method for middle-chain chlorinated paraffins (MCCPs) 5020 CEN/TC 289 (ISO/FDIS 18219-2:2021) Leather - Chemical tests - Determination of pesticide residues content 451 MEAT 102 prEN ISO 22517 4010 CEN/TC 289 (ISO 22517:2019) Leather - Chemical tests - Determination of free formaldehyde in process 452 MEAT 102 FprEN ISO 27587 5020 CEN/TC 289 auxiliaries (ISO/FDIS 27587:2020) Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO/FDIS 453 MEAT 103 FprEN ISO 1140 5020 CEN/TC 248 1140:2021) 454 MEAT 103 FprEN ISO 1141 Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO/DIS 1141:2020) 5020 CEN/TC 248 Fibre ropes - Polypropylene split film, monofilament and multifilament 455 MEAT 103 FprEN ISO 1346 (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 5020 CEN/TC 248 12-strand ropes (ISO/FDIS 1346:2021) 456 MEAT 103 prEN ISO 2076 Textiles - Man-made fibres - Generic names (ISO/DIS 2076:2021) 4020 CEN/TC 248 Textiles - Domestic washing and drying procedures for textile testing (ISO/ 457 MEAT 103 prEN ISO 6330 4020 CEN/TC 248 DIS 6330:2020) 458 MEAT 103 FprCEN/TS 14237 Textiles for healthcare and social services facilities 3099 CEN/TC 248 Rubber- or plastics-coated fabrics - Mechanical test methods under biaxial 459 MEAT 103 prEN 17117-2 4020 CEN/TC 248 stress states - Part 2: Determination of the pattern compensation values Test method for the determination of thermal resistance of child sleep 460 MEAT 103 prEN 17667 bags, cot blankets and cot duvets by means of a small guarded hotplate 3099 CEN/TC 248 apparatus Textiles - Determination of the elasticity of fabrics - Part 1: Strip tests - 461 MEAT 103 EN ISO 20932-1:2020/prA1 4020 CEN/TC 248 Amendment 1 (ISO 20932-1:2018/DAM 1:2021) Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of 462 MEAT 103 FprEN ISO 22818 5020 CEN/TC 248 different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (ISO/FDIS 22818:2020) 463 MEAT 105 FprCEN/TR 12333 Fertilizers - Crushing strength determination on fertilizers grains 5020 CEN/TC 260 464 MEAT 105 FprCEN/TR 14061 Fertilizers - Determination of dust content 5020 CEN/TC 260 Straight ammonium nitrate fertilizers - Comparative study on the determi- 465 MEAT 105 FprCEN/TR 14539 5020 CEN/TC 260 nation of porosity (oil retention) Fertilizers - Determination of sulfates content using three different 466 MEAT 105 prEN 15749 3099 CEN/TC 260 methods 467 MEAT 108 prEN ISO 489 Plastics - Determination of refractive index (ISO/DIS 489:2021) 4020 CEN/TC 249

66 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 468 MEAT 108 prEN 751-3 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE 4020 CEN/TC 208 strings Thermoplastics piping and ducting systems - Outside the building struc- 469 MEAT 108 FprCEN/TS 1046 5020 CEN/TC 155 tures for gravity and pressurised systems - Trench installation Rubber and plastics hoses and hose assemblies — Hydrostatic testing 470 MEAT 108 FprEN ISO 1402 5020 CEN/TC 218 (ISO/FDIS 1402:2021) Plastics - Determination of the viscosity of polymers in dilute solution 471 MEAT 108 FprEN ISO 1628-1 using capillary viscometers - Part 1: General principles (ISO/FDIS 1628- 5020 CEN/TC 249 1:2020) Plastics - Determination of melting behaviour (melting temperature or 472 MEAT 108 prEN ISO 3146 melting range) of semi-crystalline polymers by capillary tube and polariz- 4020 CEN/TC 249 ing-microscope methods (ISO/DIS 3146:2021) Plastics - Measurement of resistivity of conductive plastics (ISO/DIS 473 MEAT 108 prEN ISO 3915 4020 CEN/TC 249 3915:2021) Rubber and plastics hoses and hose assemblies - Methods of measure- 474 MEAT 108 prEN ISO 4671 ment of the dimensions of hoses and the lengths of hose assemblies (ISO/ 4020 CEN/TC 218 DIS 4671:2021) Plastics - Methods of exposure to laboratory light sources - Part 2: 475 MEAT 108 EN ISO 4892-2:2013/prA1 Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 4020 CEN/TC 249 4892-2:2013/DAM 1:2020) Plastics - Determination of dynamic mechanical properties - Part 3: Flex- 476 MEAT 108 FprEN ISO 6721-3 5020 CEN/TC 249 ural vibration - Resonance-curve method (ISO/FDIS 6721-3:2020) Rubber and plastics hoses - Determination of volumetric expansion (ISO/ 477 MEAT 108 prEN ISO 6801 4020 CEN/TC 218 DIS 6801:2021) Rubber and plastics hoses and hose assemblies - Determination of resis- 478 MEAT 108 FprEN ISO 7233 5020 CEN/TC 218 tance to vacuum (ISO/FDIS 7233:2021) Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and char- 479 MEAT 108 prEN ISO 7823-3 4020 CEN/TC 249 acteristics - Part 3: Continuous cast sheets (ISO/FDIS 7823-3:2021) Rubber and plastics hoses and hose assemblies - Vocabulary (ISO/DIS 480 MEAT 108 prEN ISO 8330 4020 CEN/TC 218 8330:2021) Plastics piping systems used for the rehabilitation of pipelines - Clas- 481 MEAT 108 prEN ISO 11295 sification and overview of strategic and operational activities (ISO/DIS 4020 CEN/TC 155 11295:2021) Plastics piping systems for renovation of underground water supply net- 482 MEAT 108 FprEN ISO 11298-4 5020 CEN/TC 155 works - Part 4: Lining with cured-in-place pipes (ISO/FDIS 11298-4:2020) Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination 483 MEAT 108 prEN ISO 11357-7 4020 CEN/TC 249 of crystallization kinetics Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles 484 MEAT 108 prEN ISO 11358-1 4020 CEN/TC 249 (ISO/DIS 11358-1:2020) Plastics - Poly(methyl methacrylate) double- and triple-skin sheets - Test 485 MEAT 108 prEN ISO 12017 4020 CEN/TC 249 methods (ISO/FDIS 12017:2021) Plastics piping systems for water supply, and for drainage and sewerage 486 MEAT 108 prEN 12201-1 4010 CEN/TC 155 under pressure - Polyethylene (PE) - Part 1: General Plastics piping systems for water supply, and for drainage and sewerage 487 MEAT 108 prEN 12201-2 4010 CEN/TC 155 under pressure - Polyethylene (PE) - Part 2: Pipes Plastics piping systems for water supply, and for drainage and sewerage 488 MEAT 108 prEN 12201-3 4010 CEN/TC 155 under pressure - Polyethylene (PE) - Part 3: Fittings Plastics piping systems for water supply, and for drainage and sewerage 489 MEAT 108 prEN 12201-4 under pressure - Polyethylene (PE) - Part 4: Valves for water supply 4010 CEN/TC 155 systems Plastics piping systems for water supply, and for drainage and sewerage 490 MEAT 108 prEN 12201-5 under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the 4010 CEN/TC 155 system Plastics - Determination of the total luminous transmittance of transpar- 491 MEAT 108 prEN ISO 13468-2 4020 CEN/TC 249 ent materials - Part 2: Double-beam instrument (ISO/FDIS 13468-2:2021) Rubber and plastic hoses and hose assemblies with internal vapour recov- 492 MEAT 108 prEN 13483 4010 CEN/TC 218 ery for measured fuel dispensing systems - Specification Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 493 MEAT 108 prEN 14541-1 4020 CEN/TC 155 1: Terminology Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and 494 MEAT 108 prEN ISO 14631 4020 CEN/TC 249 test methods (ISO/FDIS 14631:2021) Extruded sheets of polyethylene (PE-HD) - Requirements and test meth- 495 MEAT 108 FprEN ISO 14632 5020 CEN/TC 249 ods (ISO/FDIS 14632:2021) Plastics - Extruded sheets of polypropylene (PP) - Requirements and test 496 MEAT 108 prEN ISO 15013 rev 3099 CEN/TC 249 methods Plastics - Recycled plastics - Characterization of Polyethylene (PE) recy- 497 MEAT 108 FprEN 15344 5020 CEN/TC 249 clates Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE- 498 MEAT 108 prEN ISO 15527 rev 3099 CEN/TC 249 HD) - Requirements and test methods

67 Plastics piping systems for hot and cold water installations - Polypropylene 499 MEAT 108 EN ISO 15874-3:2013/prA2 4020 CEN/TC 155 (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/DAM 2:2020) Plastics piping systems for hot and cold water installations - Crosslinked 500 MEAT 108 EN ISO 15875-3:2003/prA2 polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/ 4020 CEN/TC 155 DAM 2:2020) Plastics piping systems for hot and cold water installations - Polybutene 501 MEAT 108 EN ISO 15876-3:2017/prA2 4020 CEN/TC 155 (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/DAM 2:2020) Plastics piping systems for hot and cold water installations - Chlorinated 502 MEAT 108 EN ISO 15877-3:2009/prA2 poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877- 4020 CEN/TC 155 3:2009/DAM 2:2020) 503 MEAT 108 FprEN 16296:2021 Imperfections in thermoplastics welded joints - Quality levels 5020 CEN/TC 249 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: 504 MEAT 108 prEN ISO 16396-2 Preparation of test specimens and determination of properties (ISO/DIS 4020 CEN/TC 249 16396-2:2020) Plastics piping systems for the supply of gaseous fuels - Unplasticized 505 MEAT 108 FprEN ISO 16486-5 polyamide (PA-U) piping systems with fusion jointing and mechanical joint- 5020 CEN/TC 155 ing - Part 5: Fitness for purpose of the system (ISO/FDIS 16486-5:2021) Plastics piping systems for the supply of gaseous fuels - Unplasticized 506 MEAT 108 prEN ISO 16486-4 polyamide (PA-U) piping systems with fusion jointing and mechanical 3099 CEN/TC 155 jointing - Part 4: Valves Plastics - Determination of the degree of disintegration of plastic mate- 507 MEAT 108 FprEN ISO 16929 rials under defined composting conditions in a pilot-scale test (ISO/FDIS 5020 CEN/TC 249 16929:2020) Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrica- 508 MEAT 108 FprEN 17508 5020 CEN/TC 249 tion of windows and doors - Terminology of PVC based materials 509 MEAT 108 prEN 17615 Plastics - Environmental Aspects - Vocabulary 4020 CEN/TC 249 510 MEAT 108 CEN/TS 17627:2021 Plastics - Recycled plastics - Determination of solid contaminants content 5020 CEN/TC 249 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Manholes, inspection chambers and road 511 MEAT 108 prEN 17670-1 gullies for storm water systems made of unplasticized polyvinyl chloride 3099 CEN/TC 155 (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for storm water manholes and inspection chambers Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Manholes, inspection chambers and road 512 MEAT 108 prEN 17670-2 gullies for storm water systems made of unplasticized polyvinyl chloride 3099 CEN/TC 155 (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for road gullies 513 MEAT 108 prEN ISO 18064 Thermoplastic elastomers - Nomenclature and abbreviated terms 3099 CEN/TC 249 Multilayer piping systems for hot and cold water installations inside build- 514 MEAT 108 EN ISO 21003-3:2008/prA1 4020 CEN/TC 155 ings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/DAM 1:2020) Plastics - Determination of thermal conductivity and thermal diffusivity - 515 MEAT 108 prEN ISO 22007-2 3099 CEN/TC 249 Part 2: Transient plane heat source (hot disc) method Plastics piping systems for hot and cold water installations - Polyethylene 516 MEAT 108 EN ISO 22391-3:2009/prA2 of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 4020 CEN/TC 155 (ISO 22391-3:2009/DAM 2:2020) Plastics piping systems for pressure and non-pressure water supply, drain- 517 MEAT 108 FprEN ISO 23856 age or sewerage - Glass-reinforced thermosetting plastics (GRP) systems 5020 CEN/TC 155 based on unsaturated polyester (UP) resin (ISO/FDIS 23856:2021) Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: 518 MEAT 108 EN ISO 24024-2:2021 Preparation of test samples and determination of properties (ISO 24024- 5020 CEN/TC 249 2:2021) Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: 519 MEAT 108 EN ISO 24024-1:2021 5020 CEN/TC 249 Designation system and basis for specifications (ISO 24024-1:2021) 520 MEAT 109 prEN ISO 772 Hydrometry - Vocabulary and symbols (ISO/DIS 772:2020) 4020 CEN/TC 318 521 MEAT 109 prEN 1434-2 Thermal energy meters - Part 2: Constructional requirements 4020 CEN/TC 176 522 MEAT 109 prEN 1434-4 Thermal energy meters - Part 4: Pattern approval tests 4020 CEN/TC 176 523 MEAT 109 prEN 1434-1 Thermal energy meters - Part 1: General requirements 4020 CEN/TC 176 Thermal energy meters - Part 6: Installation, commissioning, operational 524 MEAT 109 prEN 1434-6 4020 CEN/TC 176 monitoring and maintenance 525 MEAT 109 prEN 1434-5 Thermal energy meters - Part 5: Initial verification tests 4020 CEN/TC 176 Durability of wood and wood-based products - Preservative-treated solid 526 MEAT 118 prEN 351-1 4010 CEN/TC 38 wood - Part 1: Classification of preservative penetration and retention Durability of wood and wood-based products - Preservative-treated solid 527 MEAT 118 prEN 351-2 wood - Part 2: Guidance on sampling for the analysis of preservative-treat- 4010 CEN/TC 38 ed wood 528 MEAT 118 prEN 1001 Durability of wood and wood-based products - Terminology 4020 CEN/TC 38

68 Wood preservatives - Field test method for determining the relative 529 MEAT 118 prEN 12037 protective effectiveness of a wood preservative exposed out of ground 4020 CEN/TC 38 contact - Horizontal lap-joint method Wood-based panels - Characteristic values for structural design - Part 3: 530 MEAT 118 prEN 12369-3 4020 CEN/TC 112 Solid wood panels 531 MEAT 118 prEN 13353 Solid wood panels (SWP) - Requirements 4020 CEN/TC 112 Wood flooring and wood panelling and cladding - Determination of geo- 532 MEAT 118 EN 13647:2021 5020 CEN/TC 175 metrical characteristics Durability of wood and wood-based products - Determination of treatabili- 533 MEAT 118 prEN 14734 ty of timber species to be impregnated with wood preservatives - Labora- 4020 CEN/TC 38 tory method Children's furniture - Mattresses for cots and cribs - Safety requirements 534 MEAT 118 EN 16890:2017/FprA1 5020 CEN/TC 207 and test methods Wood flooring and parquet - Determination of top layer delamination of 535 MEAT 118 EN 17456:2021 5020 CEN/TC 175 multilayer elements - Test method Woodworking machines - Safety - Part 1: Common requirements (ISO/FDIS 536 MEAT 118 FprEN ISO 19085-1 5020 CEN/TC 142 19085-1:2020) Woodworking machines - Safety - Part 17: Edge banding machines fed by 537 MEAT 118 FprEN ISO 19085-17 5020 CEN/TC 142 chains (ISO/FDIS 19085-17:2021) Laboratory glass and plastic ware - Volumetric instruments - Methods for 538 MEAT 119 prEN ISO 4787 4020 CEN/TC 332 testing of capacity and for use (ISO/DIS 4787:2021) Fine ceramics (advanced ceramics, advanced technical ceramics) - Test 539 MEAT 119 EN ISO 17562:2021 method for linear thermal expansion of monolithic ceramics by push-rod 4020 CEN/TC 184 technique (ISO 17562:2016) Fine ceramics (advanced ceramics, advanced technical ceramics) - Ther- 540 MEAT 119 EN ISO 19628:2021 mophysical properties of ceramic composites - Determination of specific 4020 CEN/TC 184 heat capacity (ISO 19628:2017) Fine ceramics (advanced ceramics, advanced technical ceramics) - Meth- 541 MEAT 119 prEN ISO 19630 ods of test for reinforcements - Determination of tensile properties of 4020 CEN/TC 184 filaments at ambient temperature (ISO 19630:2017) Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic 542 MEAT 119 prEN ISO 19634 4020 CEN/TC 184 composites - Notations and symbols (ISO 19634:2017) Fine ceramics (advanced ceramics, advanced technical ceramics) - Meth- 543 MEAT 119 prEN ISO 19674 ods of test for ceramic coatings - Determination of internal stress in 4010 CEN/TC 184 ceramic coatings by application of the Stoney formula (ISO 19674:2017) Fine ceramics (advanced ceramics, advanced technical ceramics) - Me- chanical properties of ceramic composites at ambient temperature in air 544 MEAT 119 prEN ISO 20323 4020 CEN/TC 184 atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018) Safety of toys - Part 13: Olfactory board games, cosmetic kits and gusta- 545 MEAT 125 FprEN 71-13 5020 CEN/TC 52 tive games Child care articles - Wheeled child conveyances - Part 1: Pushchairs and 546 MEAT 125 EN 1888-1:2018/prA1 4020 CEN/TC 252 prams Safety of toys - Interpretations - Part 1: Replies to requests for interpreta- 547 MEAT 125 FprCEN/TR 15371-1 5020 CEN/TC 52 tion of EN 71-1, EN 71-2, EN 71-8 and EN 71-14 Safety of toys - Interpretations - Part 2: Replies to requests for interpreta- 548 MEAT 125 FprCEN/TR 15371-2 5020 CEN/TC 52 tion of the chemical standards in the EN 71-series Lamp caps and holders together with gauges for the control of inter- 549 MEAT 131 EN 60061-1:1993/prAB 4010 CLC/TC 34 changeability and safety - Part 1: Lamps caps 550 MEAT 131 EN IEC 60598-1:2021/prAA Luminaires - Part 1: General requirements and tests 4010 CLC/TC 34 Lamps and light sources for road vehicles - Dimensional, electrical and 551 MEAT 131 FprEN IEC 60809:2021 5020 CLC/TC 34 luminous requirements Digital addressable lighting interface - Part 150: Particular requirements - 552 MEAT 131 prEN IEC 62386-150:2020 4020 CLC/TC 34 Auxiliary Power Supply Digital addressable lighting interface – Part 251: Particular requirements – 553 MEAT 131 prEN IEC 62386-251:2020 4020 CLC/TC 34 Memory bank 1 extension (Device Type 50) Digital addressable lighting interface – Part 252: Particular requirements 554 MEAT 131 prEN IEC 62386-252:2020 4020 CLC/TC 34 – Energy Reporting (Device Type 51) Digital addressable lighting interface – Part 250: Particular requirements 555 MEAT 131 prEN IEC 62386-250:2020 4020 CLC/TC 34 – Integrated Power Supply (Device Type 49) Digital addressable lighting interface – Part 253: Particular requirements 556 MEAT 131 prEN IEC 62386-253:2020 4020 CLC/TC 34 – Diagnostics and maintenance (Device Type 52) Organic Light Emitting Diode (OLED) for general lighting - Safety - Part 557 MEAT 131 prEN IEC 62868-2-3:2021 4020 CLC/TC 34 2-3: Particular requirements - Flexible OLED tiles and panels Fixed resistors for use in electronic equipment - Part 1: Generic specifica- 558 MEAT 135 prEN 60115-1 4020 CLC/TC 40XB tion Packaging of components for automatic handling - Part 1: Tape packaging 559 MEAT 135 EN 60286-1:2017/FprA1:2021 5020 CLC/SR 40 of components with axial leads on continuous tapes

69 Fixed capacitors for use in electronic equipment - Part 24: Sectional 560 MEAT 135 prEN IEC 60384-24:2020 specification - Fixed tantalum electrolytic surface mount capacitors with 4020 CLC/TC 40XA conductive polymer solid electrolyte Fixed capacitors for use in electronic equipment - Part 25: Sectional 561 MEAT 135 prEN IEC 60384-25:2020 specification: Fixed aluminium electrolytic surface mount capacitors with 4020 CLC/TC 40XA conductive polymer solid electrolyte Fixed capacitors for use in electronic equipment - Part 2: Sectional spec- 562 MEAT 135 FprEN IEC 60384-2:2021 ification - Fixed metallized polyethylene terephthalate film dielectric DC 5020 CLC/TC 40XA capacitors Fixed inductors for electromagnetic interference suppression - Part 2: 563 MEAT 135 prEN IEC 60938-2:2020 4020 CLC/TC 40XA Sectional specification on Power Line Chokes Application integration at electric utilities - System interfaces for distribu- 564 MEAT 140 FprEN IEC 61968-3:2021 5020 CLC/TC 57 tion management - Part 3: Interface for network operations Energy management system application program interface (EMS-API) - 565 MEAT 140 prEN IEC 61970-401:2020 4020 CLC/TC 57 Part 401: Profile framework Energy Management System Application Program Interface (EMS-API) – 566 MEAT 140 FprEN IEC 61970-457:2020 5020 CLC/TC 57 Part 457: Dynamics profile Energy management system application program interface (EMS-API) FprEN IEC 61970-600- 567 MEAT 140 - Part 600-2: Common Grid Model Exchange Specification (CGMES) - 5020 CLC/TC 57 2:2021 Exchange profiles specification Energy management system application program interface (EMS-API) - 568 MEAT 140 prEN IEC 61970-456:2021 4020 CLC/TC 57 Part 456: Solved power system state profiles Framework for energy market communications - Part 451-7: Balancing 569 MEAT 140 FprEN IEC 62325-451-7:2020 5020 CLC/TC 57 processes, contextual and assembly models for European style market Framework for energy market communications - Part 451-8: HVDC pro- 570 MEAT 140 prEN IEC 62325-451-8:2020 4020 CLC/TC 57 cesses, contextual and assembly models for European style market Power line communication systems for power utility applications - Part 3: 571 MEAT 140 FprEN IEC 62488-3:2021 5020 CLC/TC 57 Digital Power Line Carrier (DPLC) terminals and hybrid ADPLC terminals 572 MEAT 144 EN 15341:2019/prA1 Maintenance - Maintenance Key Performance Indicators 4020 CEN/TC 319 Maintenance - Maintenance within physical asset management - Frame- 573 MEAT 144 FprEN 17485 work for improving the value of the physical assets through their whole 5020 CEN/TC 319 life cycle 574 MEAT 144 prEN 17666 Maintenance - Maintenance engineering - Requirements 3099 CEN/TC 319 Connectors for electrical and electronic equipment - Product require- ments - Part 3-122: Detail specification for 8-way, shielded, free and fixed 575 MEAT 145 FprEN IEC 61076-3-122:2021 5020 CLC/SR 48B connectors for I/O and data transmission with frequencies up to 500 MHz and current-carrying capacity in industrial environments Radio frequency connectors - Part 54: Sectional specification for coaxial 576 MEAT 145 prEN IEC 61169-54:2020 connectors with 10 mm inner diameter of outer conductor, nominal char- 4020 CLC/SR 46F acteristic impedance 50 Ohms, Series 4.3-10 Radio-frequency connectors - Part 66: Sectional specification for RF co- 577 MEAT 145 FprEN IEC 61169-66:2020 axial connectors with 5 mm inner diameter of outer conductor, with quick- 5020 CLC/SR 46F lock- or screw-coupling, characteristic impedance 50 Ohm (series 2,2-5) Radio-frequency connectors - Part 60: Sectional specification for RF 578 MEAT 145 FprEN IEC 61169-60:2021 coaxial connectors with push on mating - Characteristic impedance 50 5020 CLC/SR 46F Ohm (type SMPM) Mechanical structures for electrical and electronic equipment - Tests 579 MEAT 145 FprEN IEC 61587-6:2021 for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor 5020 CLC/SR 48D cabinets Mechanical structures for electrical and electronic equipment - Tests for 580 MEAT 145 prEN IEC 61587-1:2021 IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test 4020 CLC/SR 48D set-up and safety aspects Connectors for Electrical and Electronic Equipment – Shielded or unshield- 581 MEAT 145 FprEN IEC 63171:2020 ed free and fixed connectors for balanced single-pair data transmission 5020 CLC/SR 48B with current carrying capacity - General requirements and tests Waveguide to coaxial adapters - Part 1: Generic specification - General 582 MEAT 145 prEN IEC 63249-1:2020 4020 CLC/SR 46F requirements and test methods Heat exchangers - Hydronic room fan coil units - Test procedures for estab- 583 MEAT 147 FprEN 1397 5020 CEN/TC 113 lishing the performance Air conditioners, liquid chilling packages and heat pumps for space heat- 584 MEAT 147 prEN 14511-1 ing and cooling and process chillers, with electrically driven compressors 4010 CEN/TC 113 - Part 1: Terms and definitions Air conditioners, liquid chilling packages and heat pumps for space heat- 585 MEAT 147 prEN 14511-2 ing and cooling and process chillers, with electrically driven compressors 4020 CEN/TC 113 - Part 2: Test conditions Air conditioners, liquid chilling packages and heat pumps for space heat- 586 MEAT 147 prEN 14511-3 ing and cooling and process chillers, with electrically driven compressors 4020 CEN/TC 113 - Part 3: Test methods

70 Air conditioners, liquid chilling packages and heat pumps for space heat- 587 MEAT 147 prEN 14511-4 ing and cooling and process chillers, with electrically driven compressors 4020 CEN/TC 113 - Part 4: Requirements Heat pumps with electrically driven compressors - Testing, performance 588 MEAT 147 EN 16147:2017/FprA1 5020 CEN/TC 113 rating and requirements for marking of domestic hot water units Hydrogen fuel - Product specification and quality assurance - Proton 589 MEAT 147 prEN 17124 4020 CEN/TC 268 exchange membrane (PEM) fuel cell applications for road vehicles 590 MEAT 147 prEN 17625 Roof-top units 4020 CEN/TC 113 591 MEAT 147 prEN ISO 21011 Cryogenic vessels - Valves for cryogenic service 3099 CEN/TC 268 Refrigerating systems and heat pumps - Valves - Requirements, testing 592 MEAT 147 FprEN ISO 21922 5020 CEN/TC 182 and marking (ISO/FDIS 21922:2021) Blast chillers and freezers cabinets for professional use - Classification, 593 MEAT 147 FprEN ISO 22042 5020 CEN/TC 44 requirements and test conditions (ISO/FDIS 22042:2020) Refrigerating systems and heat pumps - Pressure relief devices and their 594 MEAT 147 prEN ISO 24664 rev 3099 CEN/TC 182 associated piping - Methods for calculation Safety of machinery - Safety requirements for the design and construction 595 MEAT 154 FprEN 1034-1 5020 CEN/TC 198 of paper making and finishing machines - Part 1: Common requirements Metallic and oxide coatings - Measurement of coating thickness - Micro- 596 MEAT 157 FprEN ISO 1463 5020 CEN/TC 262 scopical method (ISO/FDIS 1463:2021) Metallic and other inorganic coatings - Surface treatment, metallic and 597 MEAT 157 prEN ISO 2080 4020 CEN/TC 262 other inorganic coatings - Vocabulary (ISO/DIS 2080:2020) Metallic and other inorganic coatings - Chromate conversion coatings on 598 MEAT 157 FprEN ISO 3613 zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test 5020 CEN/TC 262 methods (ISO/FDIS 3613:2021) Metallic coatings - Measurement of coating thickness - Profilometric 599 MEAT 157 FprEN ISO 4518 5020 CEN/TC 262 method (ISO/FDIS 4518:2020) Vitreous and porcelain enamels - Release from enamelled articles in 600 MEAT 157 prEN ISO 4531 4020 CEN/TC 262 contact with food - Methods of test and limits (ISO/DIS 4531:2021) Metallic coatings - Measurement of coating thickness - Scanning electron 601 MEAT 157 prEN ISO 9220 rev 3099 CEN/TC 262 microscope method 602 MEAT 157 prEN ISO 12696 Cathodic protection of steel in concrete (ISO/DIS 12696:2021) 4020 CEN/TC 219 603 MEAT 157 prEN 15112 External cathodic protection of well casings 4020 CEN/TC 219 604 MEAT 157 prEN ISO 24656 Cathodic protection of offshore wind structures (ISO/DIS 24656:2020) 4020 CEN/TC 219 605 MEAT 158 prEN 50522 Earthing of power installations exceeding 1 kV a.c. 4010 CLC/TC 99X 0,6/1,0 kV power cables with special fire performance for use in power 606 MEAT 159 prHD 604-S2 4010 CLC/TC 20 stations and similar installations Electric cables - Low voltage energy cables of rated voltages up to and 607 MEAT 159 EN 50525-1:2011/prA1 3099 CLC/TC 20 including 450/750 V (U0/U) - Part 1: General requirements Coaxial cables - Part 9-1: Sectional specification for coaxial cables for 608 MEAT 160 prEN 50117-9-1 analogue and digital signal transmission - Indoor drop cables for systems 4020 CLC/TC 46X operating at 5 MHz - 1 000 MHz Multi-element metallic cables used in analogue and digital communica- 609 MEAT 160 prEN 50288-7 tion and control - Part 7: Sectional specification for instrumentation and 4020 CLC/TC 46X control cables Metallic cables and other passive components test methods - Part 4-5: 610 MEAT 160 prEN IEC 62153-4-5:2020 Electromagnetic compatibility (EMC) - Coupling or screening attenuation - 4020 CLC/TC 46X Absorbing clamp method Lead-acid starter batteries - Part 1: General requirements and methods of 611 MEAT 161 EN 50342-1:2015/prA2 4020 CLC/TC 21X test 612 MEAT 161 prEN IEC 60086-5:2020 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte 4020 CLC/SR 35 613 MEAT 161 FprEN IEC 60086-1:2021 Primary batteries - Part 1: General 5020 CLC/SR 35 614 MEAT 161 FprEN IEC 60086-2:2021 Primary batteries - Part 2: Physical and electrical specifications 5020 CLC/SR 35 615 MEAT 161 FprEN IEC 60086-3:2021 Primary batteries - Part 3: Watch batteries 5020 CLC/SR 35 Secondary lithium-ion cells for the propulsion of electric road vehicles - 616 MEAT 161 prEN IEC 62660-3:2021 4020 CLC/TC 21X Part 3: Safety requirements Electricity metering equipment (AC) - Part 3: Particular requirements - 617 MEAT 164 prEN 50470-3 3099 CLC/TC 13 Static meters for active energy (class indexes A, B and C) Conductors for overhead lines - Aluminium and aluminium alloy wires for 618 MEAT 165 prEN IEC 62641:2021/prAA 3099 CLC/TC 7X concentric lay stranded conductors 619 MEAT 165 prEN IEC 63042-102:2020 UHV AC transmission systems - General system design 3099 CLC/SR 122 Conductors for overhead lines - Coated or cladded metallic wire for con- 620 MEAT 165 prEN IEC 63248:2021/prAA 3099 CLC/TC 7X centric lay stranded conductors Electrical measuring transducers for converting AC and DC electrical 621 MEAT 166 prEN IEC 60688:2021 4020 CLC/TC 85X quantities to analogue or digital signals

71 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000V AC AND 1500V DC-EQUIPMENT FOR TESTING - MEASURING AND 622 MEAT 166 prEN IEC 61557-17:2020 4020 CLC/TC 85X MONITORING OF PROTECTIVE MEASURES-Part 17: Non contact voltage indicators Electrical safety in low voltage distribution systems up to 1 000 V AC and FprEN IEC 61557-12:2018/ 623 MEAT 166 1 500 V DC - Equipment for testing, measuring or monitoring of protective 5020 CLC/TC 85X FprA1:2021 measures - Part 12: Power metering and monitoring devices (PMD) 624 MEAT 167 FprEN IEC 62934:2021 Grid integration of renewable energy generation - Terms and definitions 5020 CLC/TC 8X Petroleum and natural gas industries - Equations and calculations for 625 MEAT 169 prCEN ISO/TR 10400 rev the properties of casing, tubing, drill pipe and line pipe used as casing or 3099 CEN/TC 12 tubing Petroleum and natural gas industries - Drilling and production equipment 626 MEAT 169 prEN ISO 10423 4020 CEN/TC 12 - Wellhead and christmas tree equipment Petroleum and natural gas industries — Completion fluids and materials — 627 MEAT 169 prEN ISO 13503-3 rev 3099 CEN/TC 12 Part 3: Testing of heavy brines Petroleum and natural gas industries - Piping systems on offshore 628 MEAT 169 prEN ISO 13703-3 production platforms and onshore plants - Part 3: Fabrication (ISO/DIS 4020 CEN/TC 12 13703-3:2020) Petroleum, petrochemical and natural gas industries - Life cycle costing 629 MEAT 169 FprEN ISO 15663 5020 CEN/TC 12 (ISO/FDIS 15663:2020) Aluminium and aluminium alloys - Chemical composition and form of 630 MEAT 171 EN 573-3:2019/prA1 4020 CEN/TC 132 wrought products - Part 3: Chemical composition and form of products Aluminium and aluminium alloys - Circle and circle stock for the produc- 631 MEAT 171 prEN 851 4020 CEN/TC 132 tion of culinary utensils - Specifications Aluminium and aluminium alloys - Circle and circle stock for the produc- 632 MEAT 171 prEN 941 4020 CEN/TC 132 tion of general applications - Specifications Aluminium and aluminium alloys - Castings - Chemical composition and 633 MEAT 171 EN 1706:2020/prA1:2020 4020 CEN/TC 132 mechanical properties Anodizing of aluminium and its alloys - Measurement of specular reflec- 634 MEAT 171 prEN ISO 7668 tance and specular gloss of anodic oxidation coatings at angles of 20 4020 CEN/TC 132 degrees, 45 degrees, 60 degrees or 85 degrees (ISO/DIS 7668:2021) Aluminium and aluminium alloys - Extruded precision profiles in alloys EN 635 MEAT 171 prEN 12020-1 AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection 4020 CEN/TC 132 and delivery 636 MEAT 171 EN 13600:2021 Copper and copper alloys - Seamless copper tubes for electrical purposes 5020 CEN/TC 133 Copper and copper alloys - Copper rod, bar and wire for general electrical 637 MEAT 171 FprEN 13601 5020 CEN/TC 133 purposes Copper and copper alloys - Test methods for assessing protective tin coat- 638 MEAT 171 FprEN 13603 5020 CEN/TC 133 ings on drawn round copper wire for electrical purposes Copper and copper alloys - Copper profiles and profiled wire for electrical 639 MEAT 171 FprEN 13605 5020 CEN/TC 133 purposes Electrostatics - Part 5-3: Protection of electronic devices from electrostat- 640 MEAT 175 prEN IEC 61340-5-3:2021 ic phenomena - Properties and requirements classification for packaging 4020 CLC/SR 101 intended for electrostatic discharge sensitive devices Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for 641 MEAT 193 FprEN IEC 60068-2-20:2021 5020 CLC/SR 91 solderability and resistance to soldering heat of devices with leads Test methods for electrical materials, printed board and other inter- connection structures and assemblies - Part 2-807: Test methods for 642 MEAT 193 prEN IEC 61189-2-807:2021 4020 CLC/SR 91 materials for interconnection structures - Decomposition Temperature (Td) using TGA Materials for printed boards and other interconnecting structures - Part 643 MEAT 193 prEN IEC 61249-6-3:2020 6-3: Sectional specification set for reinforcement materials - Specification 4020 CLC/SR 91 for finished fabric woven from “E” glass for printed boards Surface mounting technology - Part 2: Transportation and storage condi- 644 MEAT 193 prEN IEC 61760-2:2020 4020 CLC/SR 91 tions of surface mounting devices (SMD) - Application guide Surface mounting technology - Part 3: Standard method for the specifica- 645 MEAT 193 EN IEC 61760-3:2021 5020 CLC/SR 91 tion of components for through-hole reflow (THR) soldering Seamless steel tubes for pressure purposes - Technical delivery conditions CEN/TC 459/ 646 MEAT 202 FprEN 10216-5 5020 - Part 5: Stainless steel tubes SC 10 Welded steel tubes for pressure purposes - Technical delivery conditions - CEN/TC 459/ 647 MEAT 202 FprEN 10217-7 5020 Part 7: Stainless steel tubes SC 10 Metallic tube connections for fluid power and general use - Test methods CEN/TC 459/ 648 MEAT 202 FprEN ISO 19879 5020 for hydraulic fluid power connections (ISO/FDIS 19879:2020) SC 10 Petroleum and natural gas industries - External coatings for buried or sub- CEN/TC 459/ 649 MEAT 202 prEN ISO 21809-2 merged pipelines used in pipeline transportation systems - Part 2: Single 4020 SC 10 layer fusion-bonded epoxy coatings (ISO/DIS 21809-2:2020) Couplers, spigot pins and baseplates for use in falsework and scaffolds - 650 MEAT 218 prEN 74-2 4020 CEN/TC 53 Part 2: Special couplers - Requirements and test procedures Couplers, spigot pins and baseplates for use in falsework and scaffolds - 651 MEAT 218 prEN 74-1 4020 CEN/TC 53 Part 1: Couplers for tubes - Requirements and test procedures

72 Machines for mechanical processing of minerals and similar solid mate- 652 MEAT 218 prEN 1009-6 rials - Safety - Part 6: Specific requirements for mobile and semi-mobile 3099 CEN/TC 151 machinery Earth-moving machinery - Laboratory evaluations of protective struc- 653 MEAT 218 EN ISO 3164:2013/prA1 tures - Specifications for deflection-limiting volume - Amendment 1 (ISO 4020 CEN/TC 151 3164:2013/DAM 1:2020) Paper, board, pulps and cellulosic nanomaterials - Determination of dry 654 MEAT 221 FprEN ISO 638-1 matter content by oven-drying method - Part 1: Materials in solid form 5020 CEN/TC 172 (ISO/FDIS 638-1:2021) Paper, board, pulps and cellulosic nanomaterials - Determination of dry 655 MEAT 221 FprEN ISO 638-2 matter content by oven-drying method - Part 2: Suspensions of cellulosic 5020 CEN/TC 172 nanomaterials (ISO/FDIS 638-2:2021) Paper and board intended to come into contact with foodstuffs - Determi- 656 MEAT 221 prEN 17600 nation of the fastness of fluorescent whitened paper and board - Analysis 4020 CEN/TC 172 by high-performance liquid chromatography with fluorescence detection Pulp, paper and paperboard - Determination of anthraquinone in extracts 657 MEAT 221 FprCEN/TS 17630 5020 CEN/TC 172 from pulp, paper and paperboard Heating boilers - Part 5: Heating boilers for solid fuels, manually and 658 MEAT 225 EN 303-5:2021 automatically stoked, nominal heat output of up to 500 kW - Terminology, 5020 CEN/TC 57 requirements, testing and marking 659 MEAT 225 prEN 509 Decorative fuel-effect gas appliances 4010 CEN/TC 62 Independent closed-fronted gas-fired type B11, type C11, type C31 and type 660 MEAT 225 FprEN 613 5020 CEN/TC 62 C91 heaters Water-tube boilers and auxiliary installations - Part 3: Design and calcula- 661 MEAT 225 prEN 12952-3 3099 CEN/TC 269 tion for pressure parts of the boiler Gas-fired domestic appliances producing hot water - Part 4: Assessment of 662 MEAT 225 prEN 13203-4 energy consumption of gas combined heat and power appliances (mCHP) 4020 CEN/TC 109 producing hot water and electricity Gas-fired domestic appliances producing hot water - Part 7: Assessment of 663 MEAT 225 prEN 13203-7 energy consumption of combination boilers equipped with a passive flue 4020 CEN/TC 109 heat recovery device Gas-fired domestic appliances producing hot water - Part 2: Assessment of 664 MEAT 225 prEN 13203-2 4020 CEN/TC 109 energy consumption Gas-fired domestic appliances producing hot water - Part 5: Assessment 665 MEAT 225 prEN 13203-5 of energy consumption of gas-fired appliances combined with electrical 4020 CEN/TC 109 heat pump Solar supported gas-fired domestic appliances producing hot water - 666 MEAT 225 prEN 13203-3 Appliances not exceeding 70 kW heat input and 500 litres water storage 4020 CEN/TC 109 capacity - Part 3: Assessment of energy consumption Gas-fired domestic appliances producing hot water - Part 6: Assessment 667 MEAT 225 prEN 13203-6 4020 CEN/TC 109 of energy consumption of adsorption and absorption heat pumps Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmit- 668 MEAT 230 prEN ISO 8980-3 4020 CEN/TC 170 tance specifications and test methods (ISO/DIS 8980-3:2021) 669 MEAT 230 prEN 10942 rev Ophthalmic instruments - Direct ophthalmoscopes 3099 CEN/TC 170 Lasers and laser-related equipment - Test methods for laser beam param- 670 MEAT 230 prEN ISO 12005 rev 3099 CEN/TC 123 eters - Polarization Optics and photonics - Test methods for radiation scattered by optical 671 MEAT 230 prEN ISO 13696 rev 3099 CEN/TC 123 components Ophthalmic implants - Ophthalmic viscosurgical devices (ISO/DIS 672 MEAT 230 prEN ISO 15798 4020 CEN/TC 170 15798:2020) Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/ 673 MEAT 231 FprEN ISO 407 5020 CEN/TC 23 FDIS 407:2021) LPG equipment and accessories - Procedure for checking transportable 674 MEAT 231 prEN 1439 4020 CEN/TC 286 refillable LPG cylinders before, during and after filling Gas cylinders - Compatibility of cylinder and valve materials with gas 675 MEAT 231 prEN ISO 11114-2 4020 CEN/TC 23 contents - Part 2: Non-metallic materials (ISO/DIS 11114-2:2020) Gas cylinders - Compatibility of cylinder and valve materials with gas 676 MEAT 231 prEN ISO 11114-5 contents - Part 5: Test methods for evaluating plastic liners (ISO/DIS 11114- 4020 CEN/TC 23 5:2020) 677 MEAT 231 prEN 12252 LPG equipment and accessories - Equipping of LPG road tankers 4010 CEN/TC 286 LPG equipment and accessories - Automotive liquefied petroleum gas 678 MEAT 231 prEN 12806 4020 CEN/TC 286 components - Other than containers LPG equipment and accessories - Automotive LPG-systems - Installation 679 MEAT 231 prEN 12979 4020 CEN/TC 286 requirements Gas cylinders — Gases and gas mixtures — Determination of tissue corro- 680 MEAT 231 prEN ISO 13338 rev 3099 CEN/TC 23 siveness for the selection of cylinder valve outlets LPG equipment and accessories - Automotive LPG filling system for light 681 MEAT 231 FprEN 13760 5020 CEN/TC 286 and heavy duty vehicles - Nozzle, test requirements and dimensions

73 LPG equipment and accessories - Pressure relief valves for LPG pressure 682 MEAT 231 prEN 14071 4020 CEN/TC 286 vessels - Ancillary equipment LPG Equipment and accessories - Pressure relief valves for LPG pressure 683 MEAT 231 prEN 14129 4020 CEN/TC 286 vessels Gas cylinders - Specifications and testing of LPG cylinder valves - Self-clos- 684 MEAT 231 prEN ISO 14245 4020 CEN/TC 286 ing (ISO/FDIS 14245:2021) 685 MEAT 231 prEN ISO 14246 rev Gas cylinders - Cylinder valves - Manufacturing tests and examinations 3099 CEN/TC 23 LPG equipment and accessories - Transportable refillable composite 686 MEAT 231 prEN 14427 4020 CEN/TC 286 cylinders for LPG - Design and construction LPG equipment and accessories - Inspection and maintenance of LPG 687 MEAT 231 prEN 14912 4020 CEN/TC 286 cylinder valves at time of periodic inspection of cylinders Gas cylinders - Parallel threads for connection of valves to gas cylinders - 688 MEAT 231 FprEN ISO 15245-1 5020 CEN/TC 23 Part 1: Specification (ISO/FDIS 15245-1:2021) Gas cylinders - Specifications and testing of LPG cylinder valves - Manually 689 MEAT 231 prEN ISO 15995 4020 CEN/TC 286 operated (ISO/FDIS 15995:2021) LPG equipment and accessories – Composite piping for use with LPG in 690 MEAT 231 prEN 17613 4020 CEN/TC 286 liquid phase and vapour pressure phase - Design and manufacture Gas cylinders - Seamless steel and seamless aluminium-alloy gas cyl- 691 MEAT 231 EN ISO 18119:2018/FprA1 inders and tubes - Periodic inspection and testing - Amendment 1 (ISO 5020 CEN/TC 23 18119:2018/FDAM 1:2021) Transportable gas cylinders - Inspection and maintenance of cylinder 692 MEAT 231 prEN ISO 22434 rev 3099 CEN/TC 23 valves 693 MEAT 231 prEN ISO 23826 Gas cylinders - Ball valves - Specification and testing (ISO/DIS 23826:2021) 4020 CEN/TC 23 Household and similar electrical appliances - Test code for the determina- 694 MEAT 238 FprEN IEC 60704-1:2020 5020 CLC/TC 59X tion of airborne acoustical noise - Part 1: General requirements 695 MEAT 238 prEN IEC 60730-1:2020 Automatic electrical controls - Part 1: General requirements 4020 CLC/TC 72 EN IEC 60730-2-8:2020/ Automatic electrical controls - Part 2-8: Particular requirements for elec- 696 MEAT 238 4020 CLC/TC 72 prA1:2020 trically operated water valves, including mechanical requirements EN IEC 60730-2-14:2019/ Automatic electrical controls - Part 2-14: Particular requirements for 697 MEAT 238 4020 CLC/TC 72 prA2:2020 electric actuators Household and similar electrical appliances - Safety - Part 2-17: Particular EN 60335-2-17:2013/ 698 MEAT 239 requirements for blankets, pads, clothing and similar flexible heating 5020 CLC/TC 61 FprA2:2020 appliances Household and similar electrical appliances - Safety - Part 2-96: Particular 699 MEAT 239 prEN IEC 60335-2-96:2020 4020 CLC/TC 61 requirements for flexible sheet heating elements for room heating EN 60335-2-15:2016/ Household and similar electrical appliances - Safety - Part 2-15: Particular 700 MEAT 239 4020 CLC/TC 61 prA2:2020 requirements for appliances for heating liquids Household and similar electrical appliances - Safety - Part 2-27: Particular 701 MEAT 239 prEN IEC 60335-2-27:2020 requirements for appliances for skin exposure to ultraviolet and infrared 4020 CLC/TC 61 radiation Household and similar electrical appliances - Safety - Part 2-27: Particular prEN IEC 60335-2-27:2020/ 702 MEAT 239 requirements for appliances for skin exposure to ultraviolet and infrared 4020 CLC/TC 61 prA11:2020 radiation EN 60335-2-73:2003/ Household and similar electrical appliances - Safety - Part 2-73: Particular 703 MEAT 239 5020 CLC/TC 61 FprAA:2020 requirements for fixed immersion heaters EN 60335-2-8:2015/ Household and similar electrical appliances - Safety - Part 2-8: Particular 704 MEAT 239 5020 CLC/TC 61 FprA11:2020 requirements for shavers, hair clippers and similar appliances EN 60335-1:2012/ Household and similar electrical appliances - Safety - Part 1: General 705 MEAT 239 5020 CLC/TC 61 FprA15:2020 requirements EN 60335-2-8:2015/ Household and similar electrical appliances - Safety - Part 2-8: Particular 706 MEAT 239 5020 CLC/TC 61 FprA2:2020 requirements for shavers, hair clippers and similar appliances EN 60335-2-8:2015/ Household and similar electrical appliances - Safety - Part 2-8: Particular 707 MEAT 239 5020 CLC/TC 61 FprA12:2020 requirements for shavers, hair clippers and similar appliances Household and similar electrical appliances - Safety - Part 2-84: Particular 708 MEAT 239 prEN 60335-2-84:2020 4020 CLC/TC 61 requirements for toilet appliances prEN IEC 60335-2-96:2020/ Household and similar electrical appliances - Safety - Part 2-96: Particular 709 MEAT 239 4020 CLC/TC 61 prA11:2020 requirements for flexible sheet heating elements for room heating EN 60335-2-15:2016/ Household and similar electrical appliances - Safety - Part 2-15: Particular 710 MEAT 239 4020 CLC/TC 61 prA1:2020 requirements for appliances for heating liquids Household and similar electrical appliances - Safety - Part 2-2: Particular 711 MEAT 239 prEN IEC 60335-2-2:2020 4020 CLC/TC 61 requirements for vacuum cleaners and water-suction cleaning appliances EN 60335-2-15:2016/ Household and similar electrical appliances - Safety - Part 2-15: Particular 712 MEAT 239 4020 CLC/TC 61 prA12:2020 requirements for appliances for heating liquids prEN 60335-2-84:2020/ Household and similar electrical appliances - Safety - Part 2-84: Particular 713 MEAT 239 4020 CLC/TC 61 prAA:2020 requirements for toilet appliances EN IEC 60335-2-90:2020/ Household and similar electrical appliances - Safety - Part 2-90: Particular 714 MEAT 239 4020 CLC/TC 61 prA2:2020 requirements for commercial microwave ovens EN 60335-2-65:2003/ Household and similar electrical appliances - Safety - Part 2-65: Particular 715 MEAT 239 5020 CLC/TC 61 FprA12:2020 requirements for air-cleaning appliances

74 prEN IEC 60335-2-2:2020/ Household and similar electrical appliances - Safety - Part 2-2: Particular 716 MEAT 239 4020 CLC/TC 61 prA11:2020 requirements for vacuum cleaners and water-suction cleaning appliances EN 60335-2-61:2003/ Household and similar electrical appliances - Safety - Part 2-61: Particular 717 MEAT 239 4020 CLC/TC 61 prA12:2020 requirements for thermal-storage room heaters EN 60335-2-86:2018/ Household and similar electrical appliances - Safety - Part 2-86: Particular 718 MEAT 239 4020 CLC/TC 61 prAA:2020 requirements for electric fishing machines EN IEC 60335-2-87:2020/ Household and similar electrical appliances - Safety - Part 2-87: Particular 719 MEAT 239 4020 CLC/TC 61 prA1:2020 requirements for electrical animal-stunning equipment Household and similar electrical appliances - Safety - Part 1: General 720 MEAT 239 EN 60335-1:2012/prA16 4020 CLC/TC 61 requirements EN 60335-2-21:2021/ Household and similar electrical appliances - Safety - Part 2-21: Particular 721 MEAT 239 4020 CLC/TC 61 prA1:2021 requirements for storage water heaters Household and similar electrical appliances - Safety - Part 2-51: Particular 722 MEAT 239 prEN IEC 60335-2-51:2021 requirements for stationary circulation pumps for heating and service 4020 CLC/TC 61 water installations Household and similar electrical appliances - Safety - Part 2-51: Particular prEN IEC 60335-2-51:2021/ 723 MEAT 239 requirements for stationary circulation pumps for heating and service 4020 CLC/TC 61 prAA water installations Household and similar electrical appliances - Safety - Part 2-95: Particular 724 MEAT 239 prEN IEC 60335-2-95:2021 requirements for drives for vertically moving garage doors for residential 4020 CLC/TC 61 use Household and similar electrical appliances - Safety - Part 2-95: Particular prEN IEC 60335-2-95:2021/ 725 MEAT 239 requirements for drives for vertically moving garage doors for residential 4020 CLC/TC 61 prAA:2021 use Household and similar electrical appliances - Safety - Part 2-54: Particular 726 MEAT 239 EN 60335-2-54:2008/prA2 requirements for surface-cleaning appliances for household use employ- 3099 CLC/TC 61 ing liquids or steam prEN IEC 60335-2-11:2020/ Household and similar electrical appliances - Safety - Part 2-11: Particular 727 MEAT 239 4020 CLC/TC 61 prAA:2021 requirements for tumble dryers prEN IEC 60335-2-7:2020/ Household and similar electrical appliances - Safety - Part 2-7: Particular 728 MEAT 239 4020 CLC/TC 61 prAA:2021 requirements for washing machine Electric appliances connected to the water mains - Avoidance of backsi- 729 MEAT 239 EN 61770:2009/prAA:2020 4020 CLC/TC 61 phonage and failure of hose-sets 730 MEAT 270 prEN ISO 8611-1 Pallets for materials handling — Flat pallets — Part 1: Test methods 4020 CEN/TC 261 Pallets for materials handling — Flat pallets — Part 2: Performance 731 MEAT 270 prEN ISO 8611-2 4020 CEN/TC 261 requirements and selection of tests Glass packaging - Dimensions of neck finishes for aerosol and spray glass 732 MEAT 270 prEN 14854 4020 CEN/TC 261 containers Intermodal loading units and commercial vehicles - Transport stability of 733 MEAT 270 FprEN 17321 5020 CEN/TC 119 packages - Minimum requirements and tests Packaging — Test methods and requirements to demonstrate that plastic caps and lids of single use beverage containers with a capacity of up to 734 MEAT 270 prEN 17665 3099 CEN/TC 261 three litres remain attached to the containers during the product’s intend- ed use stage Chemical disinfectants and antiseptics - Application of European Stan- 735 MEAT 298 prEN 14885 4020 CEN/TC 216 dards for chemical disinfectants and antiseptics Chemical disinfectants and antiseptics - Chemical-thermal textile disinfec- 736 MEAT 298 prEN 16616 4020 CEN/TC 216 tion - Test method and requirements (phase 2, step 2) 737 MEAT 298 prEN 17616 Outdoor candles - Specification for fire safety 4020 CEN/TC 369 738 MEAT 298 prEN 17617 Outdoor candles - Product safety labels 4020 CEN/TC 369 Chemical disinfectants and antiseptics - Chemical textile disinfection for 739 MEAT 298 prEN 17658 4010 CEN/TC 216 the domestic area - Test method and requirements (phase 2, step 2) Cosmetics - Analytical methods - Determination of traces of mercury in 740 MEAT 298 prEN ISO 23821 cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technolo- 4020 CEN/TC 392 gy after pressure digestion (ISO/DIS 23821:2021) Cosmetics - Sun protection test methods - In vivo determination of sun- 741 MEAT 298 prEN ISO 24442 4020 CEN/TC 392 screen UVA protection (ISO/DIS 24442:2021) Cosmetics - Sun protection test methods - In vivo determination of the sun 742 MEAT 298 EN ISO 24444:2020/prA1 4020 CEN/TC 392 protection factor (SPF) - Amendment 1 (ISO 24444:2019/DAM 1:2021) Safety and control devices for burners and appliances burning gaseous 743 MEAT 305 prEN 1854 and/or liquid fuels — Pressure sensing devices for gas burners and gas 4020 CEN/TC 58 burning appliances Pressure regulators, automatic change-over devices, having a maximum 744 MEAT 305 FprEN 16129 regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associ- 5020 CEN/TC 181 ated safety devices and adaptors for butane, propane, and their mixtures Residential solid fuel burning appliances - Part 1: General requirements 745 MEAT 305 prEN 16510-1 4010 CEN/TC 295 and test methods 746 MEAT 305 prEN 16510-2-1 Residential solid fuel burning appliances - Part 2-1: Roomheaters 4010 CEN/TC 295

75 Residential solid fuel burning appliances - Part 2-2: Inset appliances 747 MEAT 305 prEN 16510-2-2 4010 CEN/TC 295 including open fires 748 MEAT 305 prEN 16510-2-3 Residential solid fuel burning appliances - Part 2-3: Cookers 4010 CEN/TC 295 Residential solid fuel burning appliances - Part 2-4: Independent boilers - 749 MEAT 305 prEN 16510-2-4 4010 CEN/TC 295 Nominal heat output up to 50 kW Residential solid fuel burning appliances - Part 2-6: Mechanically by wood 750 MEAT 305 prEN 16510-2-6 4010 CEN/TC 295 pellets fed roomheaters, inset appliances and cookers Safety and control devices for burners and appliances burning gaseous or 751 MEAT 305 prEN 16830 liquid fuels - Control functions in electronic systems - Temperature Control 4020 CEN/TC 58 function Specifications for dedicated liquefied petroleum gas appliances - LPG 752 MEAT 305 EN 17476:2021 vapour pressure appliances incorporating a horizontal cartridge in the 5020 CEN/TC 181 chassis Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating trans- 753 MEAT 312 FprEN IEC 61558-2-1:2021 5020 CLC/SR 96 formers and power supplies incorporating separating transformers for general applications 754 MEAT 320 prEN 590 Automotive fuels - Diesel - Requirements and test methods 4010 CEN/TC 19 Petroleum and related products -- Precision of measurement methods and results -- Part 4: Use of Statistical Control Charts to validate 'in-statisti- 755 MEAT 320 prEN ISO 4259-4 4020 CEN/TC 19 cal-control' status for the execution of a standard test method in a single laboratory Determination of flash point - Abel closed-cup method (ISO/FDIS 756 MEAT 320 FprEN ISO 13736 5020 CEN/TC 19 13736:2020) Ethanol as a blending component for petrol - Determination of total acidi- 757 MEAT 320 prEN 15491 4010 CEN/TC 19 ty - Colour indicator titration method Oil spill identification - Waterborne petroleum and petroleum products 758 MEAT 320 prEN 15522-2 - Part 2: Analytical methodology and interpretation of results based on 4020 CEN/TC 19 GC-FID and GC-MS low resolution analyses Oil spill identification Petroleum and petroleum related products Part 1: 759 MEAT 320 prEN 15522-1 4020 CEN/TC 19 Sampling Petroleum products and related materials - Determination of hydrocarbon 760 MEAT 320 prEN 15553 4010 CEN/TC 19 types - Fluorescent indicator adsorption method Petroleum industry and products - Determination of composition of refin- 761 MEAT 320 prEN 15984 ery heating gas and calculation of carbon content and calorific value - Gas 4010 CEN/TC 19 chromatography method Liquid petroleum products - Middle distillates and fatty acid methyl ester 762 MEAT 320 prEN 16091 (FAME) fuels and blends - Determination of oxidation stability by rapid 3099 CEN/TC 19 small scale oxidation method Automotive fuels - Automotive B10 diesel fuel - Requirements and test 763 MEAT 320 prEN 16734 4010 CEN/TC 19 methods Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry - Amendment 764 MEAT 320 EN ISO 20884:2019/prA1 4020 CEN/TC 19 1: Addition of the SSD detector to the Monochromatic Excitation part of Table 1 (ISO 20884:2019/DAM 1:2021) Resilient,textile and laminate floor coverings - Castor chair test (ISO 765 MEAT 324 prEN ISO 4918 4020 CEN/TC 134 4918:2016) Resilient floor coverings - Determination of dimensional stability and 766 MEAT 324 prEN ISO 23999 4020 CEN/TC 134 curling after exposure to heat (ISO/DIS 23999:2021) Secure storage units — Classification for high security locks according to 767 MEAT 336 prEN 17646 4010 CEN/TC 263 their resistance to unauthorized opening — distributed systems General methods of test for pigments and extenders - Part 2: Determina- 768 MEAT 338 prEN ISO 787-2 4020 CEN/TC 298 tion of matter volatile at 105 °C (ISO/DIS 787-2:2021) Paints and varnishes - Coating materials and coating systems for exterior 769 MEAT 338 prEN 927-5 4020 CEN/TC 139 wood - Part 5: Assessment of the liquid water permeability Rheology - Part 2: General principles of rotational and oscillatory rheome- 770 MEAT 338 FprEN ISO 3219-2 5020 CEN/TC 139 try (ISO/FDIS 3219-2:2020) Extenders - Specifications and methods of test - Part 19: Precipitated 771 MEAT 338 FprEN ISO 3262-19 5020 CEN/TC 298 silica (ISO/FDIS 3262-19:2020) Extenders - Specifications and methods of test - Part 20: Fumed silica 772 MEAT 338 FprEN ISO 3262-20 5020 CEN/TC 298 (ISO/FDIS 3262-20:2020) 773 MEAT 338 FprEN ISO 9038 Determination of sustained combustibility of liquids (ISO/FDIS 9038:2021) 5020 CEN/TC 139 Preparation of steel substrates before application of paints and related 774 MEAT 338 prEN ISO 11124-5 products - Specifications for metallic blast-cleaning abrasives - Part 5: 4020 CEN/TC 139 Steel cut wire shot (ISO 11124-5:2019) Paints and varnishes - Paints and varnishes for interior walls and ceilings 775 MEAT 338 prEN 13300 4010 CEN/TC 139 - Classification 776 MEAT 338 prEN 13523-25 Coil coated metals - Test methods - Part 25: Resistance to humidity 4020 CEN/TC 139 777 MEAT 338 prEN 13523-9 Coil coated metals - Test methods - Part 9: Resistance to water immersion 4020 CEN/TC 139

76 Coil coated metals - Test methods - Part 7: Resistance to cracking on bend- 778 MEAT 338 prEN 13523-7 4020 CEN/TC 139 ing (T-bend test) Coil coated metals - Test methods - Part 3: Colour difference - Instrumen- 779 MEAT 338 prEN 13523-3 4020 CEN/TC 139 tal comparison Coil coated metals - Test methods - Part 26: Resistance to condensation 780 MEAT 338 prEN 13523-26 4020 CEN/TC 139 of water 781 MEAT 338 FprCEN/TR 15990 Data Sheets - Footwear Tests Materials and Test Adhesives 5020 CEN/TC 193 Paints and varnishes - Laboratory method for determination of release 782 MEAT 338 prEN 16105 of regulated dangerous substances from coatings in intermittent contact 4010 CEN/TC 139 with water Paints and varnishes - Coating materials and coating systems for exterior 783 MEAT 338 FprCEN/TS 16360 wood - Assessment of film extensibility by indentation of a coating on a 5020 CEN/TC 139 wooden substrate Glued-in rods in glued structural timber products - Testing, requirements 784 MEAT 338 EN 17334:2021 5020 CEN/TC 193 and bond shear strength classification Two-component epoxy and polyurethane adhesives for on-site repair of 785 MEAT 338 EN 17418:2021 cracked timber structures - Testing, requirements and repair strength 5020 CEN/TC 193 verification Paints and varnishes - Guidelines for the determination of anticorrosive 786 MEAT 338 prEN ISO 17463 rev properties of organic coatings by accelerated cyclic electrochemical 3099 CEN/TC 139 technique Adhesives - Wood-to-wood adhesive bonds for non-structural applications - 787 MEAT 338 prEN 17618 4020 CEN/TC 193 Determination of shear strength by compressive loading Classification of wood adhesives for non-structural timber products for 788 MEAT 338 prEN 17619 4020 CEN/TC 193 exterior use Adhesives for floor coverings – Preparation of adhesive application - Test 789 MEAT 338 prEN 17668 3099 CEN/TC 193 method for the determination of excessive humidity in subfloors Analytical colorimetry - Part 4: Metamerism index for pairs of samples for 790 MEAT 338 prEN ISO 18314-4 4020 CEN/TC 298 change of illuminant (ISO 18314-4:2020) Paints and varnishes - Evaluation of properties of coating systems related 791 MEAT 338 FprEN ISO 28199-1 to the spray application process - Part 1: Vocabulary and preparation of 5020 CEN/TC 139 test panels (ISO/FDIS 28199-1:2020) Installation and equipment for liquefied natural gas - Design of onshore 792 MEAT 357 EN 1473:2021 5020 CEN/TC 282 installations Natural gas - Determination of water by the Karl Fischer method - Part 3: 793 MEAT 357 prEN ISO 10101-3 4020 CEN/TC 238 Coulometric procedure (ISO/DIS 10101-3:2020) Natural gas - Determination of water by the Karl Fischer method - Part 2: 794 MEAT 357 prEN ISO 10101-2 4020 CEN/TC 238 Volumetric procedure (ISO/DIS 10101-2:2020) Natural gas - Determination of water by the Karl Fischer method - Part 1: 795 MEAT 357 prEN ISO 10101-1 4020 CEN/TC 238 Introduction (ISO/DIS 10101-1:2020) 796 MEAT 357 prEN 12583 Gas Infrastructure - Compressor stations - Functional requirements 4020 CEN/TC 234 Gas infrastructure - Safety Management System (SMS) and Pipeline In- 797 MEAT 357 prEN 17649 tegrity Managementsystem (PIMS) - Functional requirements - Functional 4010 CEN/TC 234 requirements Ships and marine technology - Specification for bunkering of liquefied 798 MEAT 357 prEN ISO 20519 4020 CEN/TC 282 natural gas fuelled vessels (ISO/DIS 20519:2020) Digital Information Interchange in the Insurance Industry - Part 2: Imple- 799 MEAT 373 prCEN/TR 17419-2 5020 CEN/TC 445 mentation of EN 17419-1 in Open API 3.0 specification A framework for digital preservation of cinematographic works - The 800 MEAT 373 prEN 17650 4020 CEN/TC 457 Cinema Preservation Package 801 MEAT 373 EN ISO 22259:2021 Conference systems - Equipment - Requirements (ISO 22259:2019) 4020 CEN/SS A07 Simultaneous interpreting delivery platforms - Requirements and recom- 802 MEAT 373 prEN ISO 24019 4020 CEN/SS A07 mendations (ISO/DIS 24019:2021) Conformity assessment - General requirements for third-party marks of 803 MEAT 374 prEN ISO/IEC 17030 4020 CEN/CLC/JTC 1 conformity (ISO/IEC DIS 17030:2021) Wearable electronic devices and technologies - Part 204-1: Electronic 804 MEAT 378 FprEN IEC 63203-204-1:2021 textile - Test method for assessing washing durability of leisurewear and 5020 CLC/SR 124 sportswear e-textile systems Wearable electronic devices and technologies - Part 406-1: Test method 805 MEAT 378 prEN IEC 63203-406-1:2021 for measuring surface temperature of wrist worn wearable electronic 4020 CLC/SR 124 devices while in contact with human skin Wearable electronic devices and technologies - Part 201-3: Electronic Tex- 806 MEAT 378 FprEN IEC 63203-201-3:2021 tile - Determination of electrical resistance of conductive textiles under 5020 CLC/SR 124 simulated microclimate Additive manufacturing - Material extrusion-based additive manufacturing 807 MEAT 390 EN ISO/ASTM 52903-1:2021 4020 CEN/TC 438 of plastic materials - Part 1: Feedstock materials (ISO/ASTM 52903-1:2020) 808 MEAT 392 prEN 16247-1 Energy audits - Part 1: General requirements 4010 CEN/CLC/JTC 14 809 MEAT 392 prEN 17669 Energy Performance Contracting - Minimum requirements 3099 CEN/CLC/JTC 14

77 Standard representation of geographic point location by coordinates (ISO/ 810 MEd 359 prEN ISO 6709 4020 CEN/TC 287 DIS 6709:2020) Geographic information - Referencing by coordinates - Amendment 1 (ISO/ 811 MEd 359 EN ISO 19111:2020/prA1 4020 CEN/TC 287 DAM 19111:2020) Geographic information - Positioning services - Amendment 1 (ISO/DAM 812 MEd 359 EN ISO 19116:2019/prA1 4020 CEN/TC 287 19116:2020) Geographic information - Feature concept dictionaries and registers (ISO/ 813 MEd 359 FprEN ISO 19126 5020 CEN/TC 287 FDIS 19126:2021) Geographic information - Geospatial API for features - Part 1: Core (ISO 814 MEd 359 prEN ISO 19168-1 4020 CEN/TC 287 19168-1:2020) Photocatalysis - Continuous flow test methods - Part 1: Determination of 815 MEd 378 FprEN 16980-1 5020 CEN/TC 386 the degradation of nitric oxide (NO) in the air by photocatalytic materials 816 MEd 378 FprCEN/TS 17629 Nanotechnologies - Nano- and micro- scale scratch testing 5020 CEN/TC 352 Nanotechnologies - Analysis of nano-objects using asymmetrical-flow and 817 MEd 378 FprCEN ISO/TS 21362 5020 CEN/TC 352 centrifugal field-flow fractionation (ISO/TS 21362:2018) Chemicals used for treatment of water intended for human consumption - 818 MMAP 52 prEN 936 4020 CEN/TC 164 Carbon dioxide Chemicals used for treatment of water intended for human consumption - 819 MMAP 52 FprEN 1018 5020 CEN/TC 164 Calcium carbonate Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical 820 MMAP 52 EN 1111:2017/prA1 4010 CEN/TC 164 specification Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical 821 MMAP 52 EN 1287:2017/prA1 4010 CEN/TC 164 specification 822 MMAP 52 FprEN 1488 Building valves - Expansion groups - Tests and requirements 5020 CEN/TC 164 823 MMAP 52 prEN 1491 Building valves - Expansion valves - Tests and requirements 4020 CEN/TC 164 Water quality - Determination of dissolved anions by liquid chromatog- 824 MMAP 52 prEN ISO 10304-4 raphy of ions - Part 4: Determination of chlorate, chloride and chlorite in 4020 CEN/TC 230 water with low contamination (ISO/DIS 10304-4:2020) Water and soil quality - Determination of the toxic effect of sediment 825 MMAP 52 prEN ISO 10872 and soil samples on growth, fertility and reproduction of Caenorhabditis 4010 CEN/TC 230 elegans (Nematoda) (ISO 10872:2020) Water quality - Carbon 14 - Test method using liquid scintillation counting 826 MMAP 52 FprEN ISO 13162 5020 CEN/TC 230 (ISO/DIS 13162:2020) Water quality - Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic 827 MMAP 52 prEN ISO 21676 substances in water and treated waste water - Method using high perfor- 4010 CEN/TC 230 mance liquid chromatography and mass spectrometric detection (HPLC- MS/MS or -HRMS) after direct injection (ISO 21676:2018) Water quality - Iron-55 - Test method using liquid scintillation counting 828 MMAP 52 FprEN ISO 22515 5020 CEN/TC 230 (ISO/FDIS 22515:2021) Workplace exposure - Procedures for the determination of the concentra- 829 MMAP 53 EN 482:2021 5020 CEN/TC 137 tion of chemical agents - Basic performance requirements Fugitive and diffuse emissions of common concern to industry sectors 830 MMAP 53 prEN 17628 - Standard method to determine diffuse emissions of volatile organic 4020 CEN/TC 264 compounds into the atmosphere Stationary source emissions - Manual method for the determination of the 831 MMAP 53 FprCEN/TS 17638 5020 CEN/TC 264 mass concentration of formaldehyde - Reference method Stationary source emissions - Requirements on proficiency testing 832 MMAP 53 prEN 17656 4010 CEN/TC 264 schemes for emission measurements Air quality — Performance evaluation of air quality sensor systems — Part 833 MMAP 53 prCEN/TS 17660-1 3099 CEN/TC 264 1: Gaseous pollutants in ambient air Workplace air — Gases and vapours — Requirements for evaluation of 834 MMAP 53 prEN ISO 23320 3099 CEN/TC 137 measuring procedures using diffusive samplers Environmental management - Environmental performance evaluation - 835 MMAP 323 prEN ISO 14031 4020 CEN/SS S26 Guidelines (ISO/FDIS 14031:2020) Refuse collection vehicles - General requirements and safety require- 836 MMAP 360 EN 1501-3:2021 5020 CEN/TC 183 ments - Part 3: Front loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety require- 837 MMAP 360 EN 1501-1:2021 5020 CEN/TC 183 ments - Part 1: Rear loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety require- 838 MMAP 360 EN 1501-2:2021 5020 CEN/TC 183 ments - Part 2: Side loaded refuse collection vehicles Refuse collection vehicles - General requirements and safety require- 839 MMAP 360 EN 1501-5:2021 5020 CEN/TC 183 ments - Part 5: Lifting devices for refuse collection vehicles Soil, sludge and treated biowaste - Determination of pH (ISO/FDIS 840 MMAP 360 FprEN ISO 10390 5020 CEN/TC 444 10390:2020) Soil and waste - Guidance on the selection and application of screening 841 MMAP 360 FprEN ISO 12404 5020 CEN/TC 444 methods (ISO/FDIS 12404:2021) Solid biofuels - Fuel specifications and classes - Part 1: General require- 842 MMAP 360 FprEN ISO 17225-1 5020 CEN/TC 335 ments (ISO/DIS 17225-1:2020)

78 843 MMAP 360 FprEN ISO 21640 Solid recovered fuels - Specifications and classes (ISO/FDIS 21640:2021) 5020 CEN/TC 343 844 MMAP 360 FprEN ISO 21645 Solid recovered fuels - Methods for sampling (ISO/FDIS 21645:2020) 5020 CEN/TC 343 845 MMAP 360 prEN ISO 21646 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020) 4020 CEN/TC 343 Solid recovered fuels - Determination of calorific value (ISO/FDIS 846 MMAP 360 FprEN ISO 21654 5020 CEN/TC 343 21654:2020) Solid recovered fuels - Determination of ash content (ISO/FDIS 847 MMAP 360 FprEN ISO 21656 5020 CEN/TC 343 21656:2020) Solid recovered fuels - Determination of moisture content using the oven 848 MMAP 360 FprEN ISO 21660-3 dry method - Part 3: Moisture in general analysis sample (ISO/FDIS 21660- 5020 CEN/TC 343 3:2020) Solid recovered fuels - Safe handling and storage of solid recovered fuels 849 MMAP 360 FprEN ISO 21912 5020 CEN/TC 343 (ISO/FDIS 21912:2020) Solid recovered fuels - Determination of content of volatile matter (ISO/ 850 MMAP 360 FprEN ISO 22167 5020 CEN/TC 343 FDIS 22167:2020) Soil quality - Test for measuring the inhibition of reproduction in oribatid 851 MMAP 360 prEN ISO 23266 4020 CEN/TC 444 mites (Oppia nitens) exposed to contaminants in soil (ISO 23266:2020) Solid biofuels - Determination of water sorption and its effect on durability 852 MMAP 360 FprEN ISO 23343-1 5020 CEN/TC 335 of thermally treated biomass fuels - Part 1: Pellets (ISO/FDIS 23343-1:2021) Soil quality - In situ caging of snails to assess bioaccumulation of contami- 853 MMAP 360 prEN ISO 24032 4020 CEN/TC 444 nants (ISO/DIS 24032:2020) Soil quality - Determination of soil microbial diversity - Part 2: Method by 854 MMAP 360 prCEN ISO/TS 29843-2 phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction 5020 CEN/TC 444 method Ergonomics of the thermal environment - Determination of metabolic rate 855 MMPS 54 prEN ISO 8996 4020 CEN/TC 122 (ISO/DIS 8996:2020) 856 MMPS 54 prEN 17558 Ergonomics - Ergonomics of PPE ensembles 4020 CEN/TC 122 Determination of explosion limits of gases and vapours at elevated pres- 857 MMPS 137 prEN 17624 4020 CEN/TC 305 sures, elevated temperatures or with oxidizers other than air Automatic electrostatic application systems for ignitable coating materials 858 MMPS 137 prEN 50176 4020 CLC/TC 31 - Safety requirements Explosive atmospheres - Part 26: Equipment with Separation Elements or 859 MMPS 137 FprEN IEC 60079-26:2020 5020 CLC/TC 31 combined Levels of Protection Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 860 MMPS 137 prEN 60079-11:2020 4020 CLC/TC 31 "i" 861 MMPS 137 CLC IEC/FprTS 60079-43 Explosive atmospheres - Part 43: Equipment in adverse service conditions 5020 CLC/TC 31 Explosive atmospheres - Part 17: Electrical installations inspection and 862 MMPS 137 prEN IEC 60079-17:2021 4020 CLC/TC 31 maintenance Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsi- 863 MMPS 137 CLC IEC/FprTS 60079-47 5020 CLC/TC 31 cally safe Ethernet concept (2-WISE) Workplace atmospheres - Part 2: Gas detectors - Selection, installation, 864 MMPS 137 FprEN IEC 62990-2:2021 5020 CLC/TC 31 use and maintenance of detectors for toxic gases and vapours Safety of packaging machines - Part 4: Palletizers and depalletizers and 865 MMPS 148 prEN 415-4 3099 CEN/TC 146 associated equipment Food processing machinery - Mincing machines - Safety and hygiene 866 MMPS 148 FprEN 12331 5020 CEN/TC 153 requirements Food processing machinery - Portion cutting machines - Safety and 867 MMPS 148 EN 13870:2015/FprA1:2021 5020 CEN/TC 153 hygiene requirements Food processing machinery - Food depositors - Safety and hygiene require- 868 MMPS 148 prEN 15180 4010 CEN/TC 153 ments Live Working - Electrically insulating helmets for use on low and medium 869 MMPS 176 prEN 50365 4020 CLC/TC 78 voltage installations 870 MMPS 176 prEN 50374 Conductor carts 4020 CLC/TC 78 Semiconductor devices - Reliability test method for silicon carbide discrete 871 MMPS 176 prEN IEC 62819:2021 metal-oxide semiconductor field effect transistors - Part 1: Test method 4020 CLC/TC 78 for bias temperature instability Safety of machinery - Interlocking devices associated with guards - Princi- 872 MMPS 223 prEN ISO 14119 4020 CEN/TC 114 ples for design and selection (ISO/DIS 14119:2021) 873 MMPS 227 prEN 134 Respiratory protective devices - Nomenclature of components 4020 CEN/TC 79 874 MMPS 227 prEN ISO 11610 Protective clothing - Vocabulary 3099 CEN/TC 162 Eye and face protection - Sunglasses and related eyewear - Part 1: Sun- 875 MMPS 227 prEN ISO 12312-1 4020 CEN/TC 85 glasses for general use (ISO/DIS 12312-1:2021) 876 MMPS 227 prEN 12477 Protective gloves for welders 4010 CEN/TC 162 Protective clothing - General requirements - Amendment 1 (ISO 877 MMPS 227 EN ISO 13688:2013/FprA1 5020 CEN/TC 162 13688:2013/FDAM 1:2020) Respiratory protective devices - Self-contained closed-circuit breathing 878 MMPS 227 prEN 13794 4020 CEN/TC 79 apparatus for escape - Requirements, testing and marking

79 879 MMPS 227 EN 14058:2017/prA1 Protective clothing - Garments for protection against cool environments 4020 CEN/TC 162 Protective clothing for firefighters - Laboratory test methods and perfor- 880 MMPS 227 EN ISO 15384:2020/prA1 mance requirements for wildland firefighting clothing - Amendment 1 (ISO 4020 CEN/TC 162 15384:2018/DAM 1:2020) Guidelines for selection, use, care and maintenance of smart garments 881 MMPS 227 FprCEN/TR 17620 5020 CEN/TC 162 protecting against heat and flame Protective clothing — Protection against heat and flame — Requirements 882 MMPS 227 prEN 17673 and test methods for garments with integrated smart textiles and non 3099 CEN/TC 162 textile elements Eye and face protection - Guidance on selection, use and maintenance 883 MMPS 227 FprEN ISO 19734 5020 CEN/TC 85 (ISO/FDIS 19734:2020) Protective clothing - Protection against chemicals - Measurement of cu- mulative permeation of chemicals with low vapour pressure through ma- 884 MMPS 227 EN ISO 19918:2017/FprA1 5020 CEN/TC 162 terials - Amendment 1: Extraction and chemical analysis (ISO 19918:2017/ FDAM 1:2020) Foot and leg protectors - Requirements and test methods for footwear 885 MMPS 227 prEN ISO 22568-4 components - Part 4: Non-metallic perforation resistant inserts (ISO/DIS 4020 CEN/TC 161 22568-4:2021) Electric motor-operated tools - Dust measurement procedure - Part 1: 886 MMPS 255 EN 50632-1:2015/prA2 4010 CLC/TC 116 General requirements Electric motor-operated tools - Dust measurement procedure - Part 2-11: 887 MMPS 255 EN 50632-2-11:2016/prA1 4010 CLC/TC 116 Particular requirements for jig and sabre saws Electric motor-operated tools - Dust measurement procedure - Part 2-14: 888 MMPS 255 EN 50632-2-14:2016/prA1 4010 CLC/TC 116 Particular requirements for planers Electric motor-operated tools - Dust measurement procedure - Part 2-17: 889 MMPS 255 EN 50632-2-17:2016/prA1 4010 CLC/TC 116 Particular requirements for routers and trimmers Electric motor-operated tools - Dust measurement procedure - Part 2-19: 890 MMPS 255 EN 50632-2-19:2016/prA1 4010 CLC/TC 116 Particular requirements for jointers Electric motor-operated tools - Dust measurement procedure - Part 2-22: 891 MMPS 255 EN 50632-2-22:2015/prA1 4010 CLC/TC 116 Particular requirements for cut-off machines and wall chasers Electric motor-operated tools - Dust measurement procedure - Part 2-3: 892 MMPS 255 EN 50632-2-3:2016/prA1 4010 CLC/TC 116 Particular requirements for concrete grinders and disk-type sanders Electric motor-operated tools - Dust measurement procedure - Part 2-4: 893 MMPS 255 EN 50632-2-4:2016/prA1 4010 CLC/TC 116 Particular requirements for sanders other than disk type Electric motor-operated tools - Dust measurement procedure - Part 2-5: 894 MMPS 255 EN 50632-2-5:2016/prA1 4010 CLC/TC 116 Particular requirements for circular saws Electric motor-operated tools - Dust measurement procedure - Part 3-1: 895 MMPS 255 EN 50632-3-1:2016/prA1 4010 CLC/TC 116 Particular requirements for transportable table saws Electric motor-operated tools - Dust measurement procedure - Part 3-9: 896 MMPS 255 EN 50632-3-9:2016/prA1 4010 CLC/TC 116 Particular requirements for transportable mitre saws Safety of household and similar appliances - Part 2-107: Particular require- 897 MMPS 255 EN 50636-2-107:2015/FprA3 5020 CLC/TC 116 ments for robotic battery powered electrical lawnmowers Electric motor-operated hand-held tools, transportable tools and lawn EN 62841-3-1:2014/ 898 MMPS 255 and garden machinery - Safety - Part 3-1: Particular requirements for 5020 CLC/TC 116 FprA1:2020 transportable table saws Electric motor-operated hand-held tools, transportable tools and lawn 899 MMPS 255 EN 62841-3-1:2014/FprAA and garden machinery - Safety - Part 3-1: Particular requirements for 5020 CLC/TC 116 transportable table saws Amendment 1 - Electric motor-operated hand-held tools, transportable EN 62841-3-10:2015/ 900 MMPS 255 tools and lawn and garden machinery - Safety - Part 3-10: Particular 4020 CLC/TC 116 prA1:2021 requirements for transportable cut-off machines Electric motor-operated hand-held tools, transportable tools and lawn 901 MMPS 255 EN 62841-3-10:2015/prAB and garden machinery - Safety - Part 3-10: Particular requirements for 4020 CLC/TC 116 transportable cut-off machines Electric motor-operated hand-held tools, transportable tools and lawn and FprEN IEC 62841-4-3:2020/ 902 MMPS 255 garden machinery - Safety - Part 4-3: Particular requirements for pedestri- 5020 CLC/TC 116 FprAA an controlled walk-behind lawnmowers Electric motor-operated hand-held tools, transportable tools and lawn and FprEN IEC 62841-4-4:2020/ garden machinery - Safety - Part 4-4: Particular requirements for lawn 903 MMPS 255 5020 CLC/TC 116 FprAA trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws Electric motor-operated hand-held tools, transportable tools and lawn FprEN IEC 62841-3-7:2020/ 904 MMPS 255 and garden machinery - Safety - Part 3-7: Particular requirements for 5020 CLC/TC 116 FprAA transportable wall saws Electric motor-operated hand-held tools, transportable tools and lawn and FprEN IEC 62841-2-3:2020/ 905 MMPS 255 garden machinery - Safety - Part 2-3: Particular requirements for hand- 5020 CLC/TC 116 FprAA held grinders, disc-type polishers and disc-type sanders Electric motor-operated hand-held tools, transportable tools and lawn 906 MMPS 255 prEN IEC 62841-3-5:2021 and garden machinery - Safety - Part 3-5: Particular requirements for 4020 CLC/TC 116 transportable band saws

80 Electric motor-operated hand-held tools, transportable tools and lawn EN 62841-3-12:2019/ 907 MMPS 255 and garden machinery - Safety - Part 3-12: Particular requirements for 4020 CLC/TC 116 prA1:2021 transportable threading machines Amendment 1 - Electric motor-operated hand-held tools, transportable EN 62841-3-6:2014/ 908 MMPS 255 tools and lawn and garden machinery - Safety - Part 3-6: Particular re- 4020 CLC/TC 116 prA1:2021 quirements for transportable diamond drills with liquid system Electric motor-operated hand-held tools, transportable tools and lawn prEN IEC 62841-3-5:2021/ 909 MMPS 255 and garden machinery - Safety - Part 3-5: Particular requirements for 4020 CLC/TC 116 prAA transportable band saws Electric motor-operated hand-held tools, transportable tools and lawn 910 MMPS 255 EN 62841-3-6:2014/prAB and garden machinery - Safety - Part 3-6: Particular requirements for 4020 CLC/TC 116 transportable diamond drills with liquid system Electric motor-operated hand-held tools, transportable tools and lawn 911 MMPS 255 EN 62841-3-12:2019/prAA and garden machinery - Safety - Part 3-12: Particular requirements for 4020 CLC/TC 116 transportable threading machines Human response to vibration - Measuring instrumentation - Part 2: Per- 912 MMPS 274 FprEN ISO 8041-2 5020 CEN/TC 231 sonal vibration exposure meters (ISO/FDIS 8041-2:2021) Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO/ 913 MMPS 274 prEN ISO 8253-3 4020 CEN/TC 211 DIS 8253-3:2020) Acoustics - Determination of sound immission from sound sources placed 914 MMPS 274 prEN ISO 11904-2 close to the ear - Part 2: Technique using a manikin (ISO/FDIS 11904- 4020 CEN/TC 211 2:2020) 915 MMPS 274 prEN ISO 21388 Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020) 4010 CEN/TC 211 Explosives for civil uses - Detonating cords and safety fuses - Part 1: 916 MMPS 358 prEN 13630-1 4010 CEN/TC 321 Requirements Explosives for civil uses - Detonating cords and safety fuses - Part 10: 917 MMPS 358 prEN 13630-10 4010 CEN/TC 321 Determination of initiating capability of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 11: 918 MMPS 358 prEN 13630-11 4010 CEN/TC 321 Determination of velocity of detonation of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 12: 919 MMPS 358 prEN 13630-12 4010 CEN/TC 321 Determination of burning duration of safety fuses Explosives for civil uses - Detonating cords and safety fuses - Part 2: De- 920 MMPS 358 prEN 13630-2 4010 CEN/TC 321 termination of thermal stability of detonating cords and safety fuses Explosives for civil uses - Detonating cords and safety fuses - Part 3: De- 921 MMPS 358 prEN 13630-3 4010 CEN/TC 321 termination of sensitiveness to friction of the core of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 4: 922 MMPS 358 prEN 13630-4 4010 CEN/TC 321 Determination of sensitiveness to impact of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 5: 923 MMPS 358 prEN 13630-5 4010 CEN/TC 321 Determination of resistance to abrasion of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 6: 924 MMPS 358 prEN 13630-6 4010 CEN/TC 321 Determination of resistance to tension of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 7: 925 MMPS 358 prEN 13630-7 4010 CEN/TC 321 Determination of reliability of initiation of detonating cords Explosives for civil uses - Detonating cords and safety fuses - Part 8: De- 926 MMPS 358 prEN 13630-8 4010 CEN/TC 321 termination of resistance to water of detonating cords and safety fuses Explosives for civil uses - Detonating cords and safety fuses - Part 9: 927 MMPS 358 prEN 13630-9 Determination of transmission of detonation from detonating cord to 4010 CEN/TC 321 detonating cord 928 MMPS 358 prEN 13631-1 Explosives for civil uses - Explosives - Part 1: Requirements 4010 CEN/TC 321 Explosives for civil uses - Explosives - Part 10: Method for the verification 929 MMPS 358 prEN 13631-10 4010 CEN/TC 321 of the means of initiation of explosives Explosives for civil uses - Explosives - Part 11: Determination of the trans- 930 MMPS 358 prEN 13631-11 4010 CEN/TC 321 mission of detonation of explosives 931 MMPS 358 prEN 13631-13 Explosives for civil uses - Explosives - Part 13: Determination of density 4010 CEN/TC 321 Explosives for civil uses - Explosives - Part 14: Determination of the veloci- 932 MMPS 358 prEN 13631-14 4010 CEN/TC 321 ty of detonation of explosives Explosives for civil uses - Explosives - Part 2: Determination of thermal 933 MMPS 358 prEN 13631-2 4010 CEN/TC 321 stability of explosives Explosives for civil uses - Explosives - Part 3: Determination of sensitive- 934 MMPS 358 prEN 13631-3 4010 CEN/TC 321 ness to friction of explosives Explosives for civil uses - Explosives - Part 4: Determination of sensitive- 935 MMPS 358 prEN 13631-4 4010 CEN/TC 321 ness to impact of explosives Explosives for civil uses - Explosives - Part 5: Determination of the resis- 936 MMPS 358 prEN 13631-5 4010 CEN/TC 321 tance to water of explosives Explosives for civil uses - Explosives - Part 6: Determination of the resis- 937 MMPS 358 prEN 13631-6 4010 CEN/TC 321 tance to hydrostatic pressure of explosives Explosives for civil uses - Explosives - Part 7: Determination of safety and 938 MMPS 358 prEN 13631-7 4010 CEN/TC 321 reliability at extreme temperatures

81 Explosives for civil uses - Detonators and detonating cord relays - Part 11: 939 MMPS 358 prEN 13763-11 Determination of resistance to damage by dropping of detonators and 4010 CEN/TC 321 relays Explosives for civil uses - Detonators and detonating cord relays - Part 12: 940 MMPS 358 prEN 13763-12 4010 CEN/TC 321 Determination of resistance to hydrostatic pressure Explosives for civil uses - Detonators and detonating cord relays - Part 941 MMPS 358 prEN 13763-13 13: Determination of resistance of electric detonators to electrostatic 4010 CEN/TC 321 discharge Explosives for civil uses - Detonators and detonating cord relays - Part 15: 942 MMPS 358 prEN 13763-15 4010 CEN/TC 321 Determination of equivalent initiating capability Explosives for civil uses - Detonators and detonating cord relays - Part 16: 943 MMPS 358 prEN 13763-16 4010 CEN/TC 321 Determination of delay accuracy Explosives for civil uses - Detonators and detonating cord relays - Part 17: 944 MMPS 358 prEN 13763-17 4010 CEN/TC 321 Determination of no-fire current of electric detonators Explosives for civil uses - Detonators and detonating cord relays - Part 18: 945 MMPS 358 prEN 13763-18 4010 CEN/TC 321 Determination of series firing current of electric detonators Explosives for civil uses - Detonators and detonating cord relays - Part 19: 946 MMPS 358 prEN 13763-19 4010 CEN/TC 321 Determination of firing impulse of electric detonators Explosives for civil uses - Detonators and detonating cord relays - Part 2: 947 MMPS 358 prEN 13763-2 4010 CEN/TC 321 Verification of thermal stability at high temperatures Explosives for civil uses - Detonators and detonating cord relays - Part 20: 948 MMPS 358 prEN 13763-20 4010 CEN/TC 321 Determination of total electrical resistance of electric detonators Explosives for civil uses - Detonators and detonating cord relays - Part 21: 949 MMPS 358 prEN 13763-21 4010 CEN/TC 321 Determination of flash-over voltage of electric detonators Explosives for civil uses - Detonators and detonating cord relays - Part 950 MMPS 358 prEN 13763-22 22: Determination of capacitance, insulation resistance and insulation 4010 CEN/TC 321 breakdown of leading wires Explosives for civil uses - Detonators and detonating cord relays - Part 23: 951 MMPS 358 prEN 13763-23 4010 CEN/TC 321 Determination of the shock-wave velocity of shock tube Explosives for civil uses - Detonators and detonating cord relays - Part 24: 952 MMPS 358 prEN 13763-24 4010 CEN/TC 321 Determination of the electrical non-conductivity of shock tube Explosives for civil uses - Detonators and detonating cord relays - Part 953 MMPS 358 prEN 13763-25 25: Determination of transfer capability of surface connectors, relays and 4010 CEN/TC 321 coupling accessories Explosives for civil uses - Detonators and detonating cord relays - Part 3: 954 MMPS 358 prEN 13763-3 4010 CEN/TC 321 Determination of sensitiveness to impact Explosives for civil uses - Detonators and detonating cord relays - Part 4: 955 MMPS 358 prEN 13763-4 4010 CEN/TC 321 Determination of resistance to abrasion of leading wires and shock tubes Explosives for civil uses - Detonators and detonating cord relays - Part 5: 956 MMPS 358 prEN 13763-5 Determination of resistance to cutting damage of leading wires and shock 4010 CEN/TC 321 tubes Explosives for civil uses - Detonators and detonating cord relays - Part 6: 957 MMPS 358 prEN 13763-6 Determination of resistance to cracking in low temperatures of leading 4010 CEN/TC 321 wires Explosives for civil uses - Detonators and detonating cord relays - Part 7: 958 MMPS 358 prEN 13763-7 Determination of the mechanical strength of leading wires, shock tubes, 4010 CEN/TC 321 connections, crimps and closures Explosives for civil uses - Detonators and detonating cord relays - Part 8: 959 MMPS 358 prEN 13763-8 4010 CEN/TC 321 Determination of the resistance to vibration Explosives for civil uses - Detonators and detonating cord relays - Part 9: 960 MMPS 358 prEN 13763-9 4010 CEN/TC 321 Determination of resistance to bending of detonators 961 MMPS 358 prEN 13857-1 Explosives for civil uses - Part 1: Terminology 4010 CEN/TC 321 Explosives for civil uses - Propellants and rocket propellants - Part 1: 962 MMPS 358 prEN 13938-1 4010 CEN/TC 321 Requirements Explosives for civil uses - Propellants and rocket propellants - Part 2: 963 MMPS 358 prEN 13938-2 4010 CEN/TC 321 Determination of resistance to electrostatic discharge Explosives for civil uses - Propellants and rocket propellants - Part 3: 964 MMPS 358 prEN 13938-3 4010 CEN/TC 321 Determination of deflagration to detonation transition Explosives for civil uses - Propellants and rocket propellants - Part 4: 965 MMPS 358 prEN 13938-4 4010 CEN/TC 321 Determination of burning rate under ambient conditions Explosives for civil uses - Propellants and rocket propellants - Part 5: 966 MMPS 358 prEN 13938-5 4010 CEN/TC 321 Determination of voids and fissures Explosives for civil uses - Propellants and rocket propellants - Part 7: 967 MMPS 358 prEN 13938-7 Determination of safe and reliable ignition and complete deflagration of 4010 CEN/TC 321 black powder Medical electrical equipment - Part 2-65: Particular requirements for EN 60601-2-65:2013/ 968 MS 22 the basic safety and essential performance of dental intra-oral X-ray 5020 CLC/TC 62 FprA2:2021 equipment

82 Medical electrical equipment - Part 2-63: Particular requirements for EN 60601-2-63:2015/ 969 MS 22 the basic safety and essential performance of dental extra-oral X-ray 5020 CLC/TC 62 FprA2:2021 equipment 970 MS 22 prEN IEC 62304:2021 Health software - Software life cycle processes 4020 CLC/TC 62 Refurbishment of medical electrical equipment, medical electrical 971 MS 22 prEN IEC 63120:2021 systems and sub-assemblies and reuse of components as part of the 4020 CLC/TC 62 extended life-cycle Safety, effectiveness and security in the implementation and use of con- 972 MS 22 FprEN IEC 80001-1:2021 nected medical devices or connected health software - Part 1: Application 5020 CLC/TC 62 of risk management Health Software and health IT systems safety, effectiveness and security - 973 MS 22 prEN IEC 81001-5-1:2020 4020 CLC/TC 62 Part 5-1: Security - Activities in the product lifecycle Basic standard for the in-situ assessment of exposure to radio frequency 974 MS 279 FprEN 50554 5020 CLC/TC 106X electromagnetic fields in the vicinity of a broadcast site Reasonably Foreseeable Use Conditions when referring to EMF Exposure 975 MS 279 CLC/prTR 50713 5020 CLC/TC 106X Assessment Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and 976 MS 279 prEN IEC/IEEE 62209-1528 body-mounted wireless communication devices - Part 1528: Human 4020 CLC/TC 106X models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) 977 MS 377 EN 285:2015/FprA1 Sterilization - Steam sterilizers - Large sterilizers 5020 CEN/TC 102 Dentistry - Endodontic instruments - Part 3: Compactors (ISO/FDIS 3630- 978 MS 377 FprEN ISO 3630-3 5020 CEN/TC 55 3:2021) Molecular in vitro diagnostic examinations - Specifications for pre-exam- 979 MS 377 prEN ISO 4307 4020 CEN/TC 140 ination processes for saliva - Isolated human DNA (ISO/DIS 4307:2021) 980 MS 377 prEN ISO 5361 rev Anaesthetic and respiratory equipment - Tracheal tubes and connectors 3099 CEN/TC 215 981 MS 377 prEN ISO 5367 rev Anaesthetic and respiratory equipment - Breathing sets and connectors 3099 CEN/TC 215 Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-alu- 982 MS 377 prEN ISO 5832-3 4020 CEN/TC 55 minium 4-vanadium alloy (ISO/DIS 5832-3:2020) Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nick- 983 MS 377 prEN ISO 5832-6 4020 CEN/TC 285 el-chromium-molybdenum alloy (ISO/DIS 5832-6:2021) Dentistry - Stationary dental units - Part 2: Air, water, suction and waste- 984 MS 377 prEN ISO 7494-2 4020 CEN/TC 55 water systems (ISO/DIS 7494-2:2021) Infusion equipment for medical use - Part 15: Light-protective infusion 985 MS 377 prEN ISO 8536-15 4020 CEN/TC 205 sets for single use (ISO/DIS 8536-15:2021) 986 MS 377 prEN ISO 9680 Dentistry - Operating lights (ISO/DIS 9680:2021) 4020 CEN/TC 55 Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO/DIS 987 MS 377 prEN ISO 9713 4020 CEN/TC 285 9713:2021) Medical suction equipment - Part 1: Electrically powered suction equip- 988 MS 377 prEN ISO 10079-1 4020 CEN/TC 215 ment (ISO/DIS 10079-1:2021) Medical suction equipment - Part 3: Suction equipment powered from a 989 MS 377 prEN ISO 10079-3 4020 CEN/TC 215 vacuum or positive pressure gas source (ISO/DIS 10079-3:2021) Medical suction equipment - Part 2: Manually powered suction equipment 990 MS 377 prEN ISO 10079-2 4020 CEN/TC 215 (ISO/DIS 10079-2:2021) Lung ventilators for medical use - Particular requirements for basic safety 991 MS 377 prEN ISO 10651-5 and essential performance - Part 5: Gas-powered emergency resuscitators 4010 CEN/TC 215 (ISO 10651-5:2006) 992 MS 377 FprEN ISO 10873 Dentistry - Denture adhesives (ISO/FDIS 10873:2021) 5020 CEN/TC 55 Sterilization of health care products - Radiation - Part 2: Establishing the 993 MS 377 EN ISO 11137-2:2015/prA1 4020 CEN/TC 204 sterilization dose - Amendment 1 (ISO 11137-2:2013/DAmd 1:2021) Assistive products for walking manipulated by both arms - Requirements 994 MS 377 FprEN ISO 11199-1 5020 CEN/TC 293 and test methods - Part 1: Walking frames (ISO/FDIS 11199-1:2021) Medical devices - Quality management systems - Requirements for regula- 995 MS 377 EN ISO 13485:2016/FprA1 5020 CEN/CLC/JTC 3 tory purposes (ISO 13485:2016) Test methods for wound dressings - Aspects of absorbency and moisture 996 MS 377 prEN 13726 4020 CEN/TC 205 vapour transmission, waterproofness and conformability Medical devices - Symbols to be used with medical device labels, labelling 997 MS 377 EN ISO 15223-1:2016/FprA1 and information to be supplied - Part 1: General requirements (ISO 15223- 5020 CEN/CLC/JTC 3 1:2016, including corrected version 2017-03) Washer disinfectors - Part 5: Performance requirements and test method 998 MS 377 FprEN ISO 15883-5 5020 CEN/TC 102 criteria for demonstrating cleaning efficacy (ISO/FDIS 15883-5:2020) Washer-disinfectors - Part 1: General requirements, terms and definitions 999 MS 377 prEN ISO 15883-1 4020 CEN/TC 102 and tests (ISO/DIS 15883-1:2020) Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimi- 1000 MS 377 prEN ISO 16256 4020 CEN/TC 140 crobial agents against yeast fungi involved in infectious diseases (ISO/DIS 16256:2021)

83 Method for analysis of allergens - Quantification of an extended list of 57 1001 MS 377 EN 16274:2021 suspected allergens in ready to inject fragrance materials by gas chroma- 5020 CEN/TC 347 tography mass spectrometry Molecular in vitro diagnostic examinations - Specifications for pre-exam- 1002 MS 377 FprCEN/TS 17626 5020 CEN/TC 140 ination processes for human specimen - Isolated microbiome DNA Processing of health care products - Information to be provided by the 1003 MS 377 prEN ISO 17664-1 rev medical device manufacturer for the processing of medical devices - Part 4020 CEN/TC 204 1: Critical and semi-critical medical devices will be incorporated Lung ventilators and related equipment - Vocabulary and semantics (ISO 1004 MS 377 prEN ISO 19223 4020 CEN/TC 215 19223:2019) 1005 MS 377 prEN ISO 20126 Dentistry - Manual toothbrushes - General requirements and test methods 4020 CEN/TC 55 Molecular in vitro diagnostic examinations - Specifications for preexam- 1006 MS 377 FprEN ISO 20166-4 ination processes for formalin-fixed and paraffin-embedded (FFPE) tissue 5020 CEN/TC 140 - Part 4: In situ detection techniques (ISO/FDIS 20166-4:2021) Molecular in vitro diagnostic examinations - Specifications for pre-ex- 1007 MS 377 FprEN ISO 20184-3 amination processes for frozen tissue - Part 3: Isolated DNA (ISO/FDIS 5020 CEN/TC 140 20184-3:2021) In vitro diagnostic medical devices - Clinical performance studies using 1008 MS 377 prEN ISO 20916 4010 CEN/TC 140 specimens from human subjects - Good study practice (ISO 20916:2019) 1009 MS 377 prEN ISO 21801-1 Cognitive accessibility - Part 1: General guidelines (ISO 21801-1:2020) 4020 CEN/TC 293 Assistive products - Guidelines on cognitive accessibility - Daily time man- 1010 MS 377 prEN ISO 21802 4010 CEN/TC 293 agement (ISO 21802:2019) Transfer sets for pharmaceutical preparations - Requirements and test 1011 MS 377 FprEN ISO 22413 5020 CEN/TC 205 methods (ISO/DIS 22413:2020) Molecular in vitro diagnostic examinations - Specifications for pre-ex- 1012 MS 377 FprEN ISO 23118 amination processes in metabolomics in urine, venous blood serum and 5020 CEN/TC 140 plasma (ISO/FDIS 23118:2021) 1013 MS 377 FprEN ISO 23445 Dentistry - Tissue punches (ISO/FDIS 23445:2021) 5020 CEN/TC 55 1014 MS 377 FprEN ISO 23450 Dentistry - Intraoral camera (ISO/FDIS 23450:2020) 5020 CEN/TC 55 1015 MS 377 FprEN ISO 23940 Dentistry - Excavators (ISO/FDIS 23940:2020) 5020 CEN/TC 55 Sterilization of health care products - Low temperature steam and formal- 1016 MS 377 EN ISO 25424:2019/prA1 dehyde - Requirements for development, validation and routine control of 3099 CEN/TC 204 a sterilization process for medical devices - Amendment 1 Anaesthetic and respiratory equipment — Nebulizing systems and compo- 1017 MS 377 prEN ISO 27427 rev 4020 CEN/TC 215 nents 1018 MS 377 prEN ISO 28399 Dentistry - External tooth bleaching products (ISO/FDIS 28399:2020) 4020 CEN/TC 55 Medical electrical equipment - Part 2-74: Particular requirements for basic 1019 MS 377 prEN ISO 80601-2-74 safety and essential performance of respiratory humidifying equipment 4020 CEN/TC 215 (ISO/DIS 80601-2-74:2020) Medical electrical equipment - Part 2-87: Particular requirements for basic 1020 MS 377 FprEN ISO 80601-2-87 safety and essential performance of high-frequency ventilators (ISO/FDIS 5020 CEN/TC 215 80601-2-87:2021) Railway applications - Fixed installations - Electrical safety, earthing and 1021 MTI 4 prEN 50122-2 the return circuit - Part 2: Provisions against the effects of stray currents 4020 CLC/TC 9X caused by DC traction systems Railway applications - Fixed installations - Electrical safety, earthing 1022 MTI 4 prEN 50122-3 and the return circuit - Part 3: Mutual Interaction of AC and DC traction 4020 CLC/TC 9X systems Railway applications - Fixed installations - Electrical safety, earthing and 1023 MTI 4 prEN 50122-1 4020 CLC/TC 9X the return circuit - Part 1: Protective provisions against electric shock Railway applications - Fixed installations - Particular requirements for AC 1024 MTI 4 CLC/FprTS 50152-4 4020 CLC/TC 9X switchgear - Part 4: AC metal-enclosed traction switchgear Railway applications - Current collection systems - Validation of simulation 1025 MTI 4 EN 50318:2018/prAA:2020 4020 CLC/TC 9X of the dynamic interaction between pantograph and overhead contact line Railway Applications - Fixed installations and rolling stock - Technical crite- 1026 MTI 4 prEN 50388-1 ria for the coordination between electric traction power supply systems 4020 CLC/TC 9X and rolling stock to achieve interoperability - Part 1: General 1027 MTI 4 CLC/FprTS 50701 Railway applications - Cybersecurity 5020 CLC/TC 9X Railway applications - Rolling stock - Conductor rail current collectors 1028 MTI 4 FprEN 50702 5020 CLC/TC 9X (shoegear): Characteristics and tests Guidelines for the use of EN 45545-2 for NiCd batteries on board rolling 1029 MTI 4 CLC/FprTR 50718 5020 CLC/TC 9X stock Aircraft ground support equipment - General requirements - Part 1: Basic 1030 MTI 72 prEN 1915-1 4020 CEN/TC 274 safety requirements Aerospace series - Metallic materials - Test methods - Part 001: Tensile 1031 MTI 72 prEN 2002-001 4020 ASD-STAN/D 4 testing at ambient temperature Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and 1032 MTI 72 prEN 2213 4020 ASD-STAN/D 4 tempered - Bars - De = 16 mm - 980 MPa = Rm = 1 180 MPa

84 Aerospace series - Steel 15CrMoV6 (1.7334) - Forgings - Bars - De = 100 1033 MTI 72 prEN 2252 4020 ASD-STAN/D 4 mm - 1 080 MPa = Rm = 1 250 MPa Aerospace series - Bush, plain, in corrosion resisting steel with self-lubri- 1034 MTI 72 prEN 2287 4020 ASD-STAN/D 3 cating liner - Dimensions and loads Aerospace series - Nuts, hexagon, plain, reduced height, normal across 1035 MTI 72 prEN 2876 flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient 4020 ASD-STAN/D 3 temperature)/120 °C Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in 1036 MTI 72 prEN 3434 steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at 4020 ASD-STAN/D 3 ambient temperature)/235 °C Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and 1037 MTI 72 prEN 3523 tempered - Bar for machining - De = 100 mm - 1 080 MPa = Rm = 1 280 4020 ASD-STAN/D 4 MPa Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and 1038 MTI 72 prEN 3524 tempered - Sheets and strips - 2 mm = a = 6 mm - 1 080 MPa = Rm = 1 4020 ASD-STAN/D 4 280 MPa Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and 1039 MTI 72 prEN 3525 4020 ASD-STAN/D 4 tempered - Plates - 6 mm = a = 20 mm - 1 080 MPa = Rm = 1 280 MPa Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and 1040 MTI 72 prEN 3526 tempered - Sheet and strip - 0,5 mm = a = 6 mm - 980 MPa = Rm = 1 180 4010 ASD-STAN/D 4 MPa Aerospace series - Qualification and approval of personnel for nondestruc- 1041 MTI 72 prEN 4179 4020 ASD-STAN/D 4 tive testing Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15N1) -Vacuum 1042 MTI 72 FprEN 4566 5020 ASD-STAN/D 4 melted - Solution treated - Forgings - De = 100 mm Aerospace series - Unmanned Aircraft Systems - Part 003: Geo-awareness 1043 MTI 72 prEN 4709-003 4020 ASD-STAN/D 5 requirements Aerospace series - Unmanned Aircraft Systems - Part 002: Direct Remote 1044 MTI 72 prEN 4709-002 4020 ASD-STAN/D 5 identification Aerospace series - Unmanned Aircraft Systems - Part 004: Lighting 1045 MTI 72 prEN 4709-004 4020 ASD-STAN/D 5 requirements Aerospace series - Polyetheretherketone with 55 % continuous carbon fi- 1046 MTI 72 prEN 4717 4010 ASD-STAN/D 4 bre by volume (PEEK-CF55) - Stock shape material - Material specification Aerospace series - Polyetheretherketone with 55 % continuous glass fibre 1047 MTI 72 prEN 4718 4010 ASD-STAN/D 4 by volume (PEEK-GF55) - Stock shape material - Material specification Aerospace series - Environmental testing - Hand abrasion and fingerprint 1048 MTI 72 prEN 4876 4010 ASD-STAN/D 4 test on cabin touchscreen and pencil abrasion on signing touch pads Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch 1049 MTI 72 prEN 6052 4020 ASD-STAN/D 3 series - Technical Specification Aerospace series - Quality systems - Direct Ship - Guidance for Aerospace 1050 MTI 72 prEN 9114 4020 ASD-STAN/D 6 Companies Aircraft ground support equipment - Specific requirements - Part 4: Pas- 1051 MTI 72 prEN 12312-4 4020 CEN/TC 274 senger boarding bridges Aircraft ground support equipment - Specific requirements - Part 1: 1052 MTI 72 prEN 12312-1 4020 CEN/TC 274 Passenger stairs Space product assurance - Adhesive bonding for spacecraft and launcher 1053 MTI 72 FprEN 16602-70-16 5020 CEN/CLC/JTC 5 applications 1054 MTI 72 FprEN 16602-70-15 Space product assurance - Non-destructive testing 5020 CEN/CLC/JTC 5 Space product assurance - Processing and quality assurance requirements 1055 MTI 72 prEN 16602-70-80 4020 CEN/CLC/JTC 5 for metallic powder bed fusion technologies for space applications 1056 MTI 72 prEN 16602-30-11 Space product assurance - Derating - EEE components 4020 CEN/CLC/JTC 5 1057 MTI 72 prEN 16603-50 Space engineering - Communications 4020 CEN/CLC/JTC 5 1058 MTI 72 prEN 16603-10-04 Space engineering - Space environment 4020 CEN/CLC/JTC 5 1059 MTI 72 prEN 16603-50-16 Space engineering - Time triggered Ethernet 4020 CEN/CLC/JTC 5 Space - Space Situational Awareness Monitoring - Part 01: Glossary of 1060 MTI 72 prEN 16604-30-01 4020 CEN/CLC/JTC 5 Near Earth objects and space surveillance and tracking terms 1061 MTI 72 prEN 17436 Cabin air quality on civil aircraft - Chemical compounds 4020 CEN/TC 436 FprCEN/CLC/TR 17603- 1062 MTI 72 Space engineering - Li-ion battery testing handbook 5020 CEN/CLC/JTC 5 20-02 1063 MTI 72 FprCEN/CLC/TR 17603-10-02 Space engineering - Verification guidelines 5020 CEN/CLC/JTC 5 Space engineering - Calculation of radiation and its effects and margin 1064 MTI 72 FprCEN/CLC/TR 17603-10-12 5020 CEN/CLC/JTC 5 policy handbook 1065 MTI 72 FprCEN/CLC/TR 17603-11 Space engineering - Technology readiness level (TRL) guidelines 5020 CEN/CLC/JTC 5 Space Engineering - Thermal design handbook - Part 3: Spacecraft Sur- 1066 MTI 72 FprCEN/CLC/TR 17603-31-03 5020 CEN/CLC/JTC 5 face Temperature 1067 MTI 72 FprCEN/CLC/TR 17603-31-09 Space Engineering - Thermal design handbook - Part 9: Radiators 5020 CEN/CLC/JTC 5

85 FprCEN/CLC/TR 17603-20- 1068 MTI 72 Space engineering - High voltage engineering and design handbook 5020 CEN/CLC/JTC 5 05 Space Engineering - Thermal design handbook - Part 4: Conductive Heat 1069 MTI 72 FprCEN/CLC/TR 17603-31-04 5020 CEN/CLC/JTC 5 Transfer 1070 MTI 72 FprCEN/CLC/TR 17603-31-11 Space engineering - Thermal design handbook - Part 11: Electrical Heating 5020 CEN/CLC/JTC 5 1071 MTI 72 FprCEN/CLC/TR 17603-31-07 Space Engineering - Thermal design handbook - Part 7: Insulations 5020 CEN/CLC/JTC 5 Space Engineering - Thermal design handbook - Part 2: Holes, Grooves 1072 MTI 72 FprCEN/CLC/TR 17603-31-02 5020 CEN/CLC/JTC 5 and Cavities 1073 MTI 72 FprCEN/CLC/TR 17603-31-08 Space Engineering - Thermal design handbook - Part 8: Heat Pipes 5020 CEN/CLC/JTC 5 Space Engineering - Thermal design handbook - Part 5: Structural Materi- 1074 MTI 72 FprCEN/CLC/TR 17603-31-05 5020 CEN/CLC/JTC 5 als: Metallic and Composite Space Engineering - Thermal design handbook - Part 6: Thermal Control 1075 MTI 72 FprCEN/CLC/TR 17603-31-06 5020 CEN/CLC/JTC 5 Surfaces 1076 MTI 72 FprCEN/CLC/TR 17603-31-01 Space Engineering - Thermal design handbook - Part 1: View factors 5020 CEN/CLC/JTC 5 Space engineering - Thermal design handbook - Part 10: Phase - Change 1077 MTI 72 FprCEN/CLC/TR 17603-31-10 5020 CEN/CLC/JTC 5 Capacitor 1078 MTI 72 prCEN/CLC/TR 17603-31-12 Space Engineering - Thermal design handbook - Part 12: Louvers 5020 CEN/CLC/JTC 5 1079 MTI 72 prCEN/CLC/TR 17603-31-13 Space Engineering - Thermal design handbook - Part 13: Fluid Loops 5020 CEN/CLC/JTC 5 1080 MTI 72 prCEN/CLC/TR 17603-31-14 Space Engineering - Thermal design handbook - Part 14: Cryogenic Cooling 5020 CEN/CLC/JTC 5 1081 MTI 72 prCEN/CLC/TR 17603-31-15 Space Engineering - Thermal design handbook - Part 15: Existing Satellites 5020 CEN/CLC/JTC 5 Space Engineering - Thermal design handbook - Part 16: Thermal Protec- 1082 MTI 72 prCEN/CLC/TR 17603-31-16 5020 CEN/CLC/JTC 5 tion System Public-address-general-emergency-alarm-system, communication-system 1083 MTI 143 FprEN 50695:2021 5020 CLC/BTTF 157-1 for marine applications Maritime navigation and radiocommunication equipment and systems 1084 MTI 143 EN 61996-1:2013/prA1:2020 - Shipborne voyage data recorder (VDR) - Part 1: Performance require- 4020 CLC/SR 80 ments, methods of testing and required test results Maritime navigation and radiocommunication equipment and systems – 1085 MTI 143 FprEN IEC 63154:2020 Cybersecurity – General requirements, methods of testing and required 5020 CLC/SR 80 test results Maritime navigation and radiocommunication equipment and systems - 1086 MTI 143 prEN IEC 63173-1:2020 4020 CLC/SR 80 Data Interface - Part 1: S-421 Route Plan Based on S-100 1087 MTI 146 EN 12080:2017/prA1 Railway applications - Axleboxes - Rolling bearings 4010 CEN/TC 256 1088 MTI 146 EN 12082:2017/FprA1 Railway applications - Axleboxes - Performance testing 5020 CEN/TC 256 Railway Applications - Track - Performance requirements for fastening 1089 MTI 146 prEN 13481-7 systems - Part 7: Fastening systems for switches and crossings, check rails, 4020 CEN/TC 256 insulated rail joints and rail expansion devices Railway Applications - Track - Performance Requirements for Fastening 1090 MTI 146 prEN 13481-3 Systems - Part 3: Fastening Systems for wood and polymeric composite 4020 CEN/TC 256 sleepers Railway Applications - Track - Performance Requirements for Fastening 1091 MTI 146 prEN 13481-2 4020 CEN/TC 256 Systems - Part 2: Fastening systems for concrete sleepers in ballast Railway Applications - Track - Performance requirements for fastening 1092 MTI 146 prEN 13481-5 4020 CEN/TC 256 systems - Part 5: Fastening systems for ballastless track Railway applications - Track - Performance requirements for fastening 1093 MTI 146 prEN 13481-4 4020 CEN/TC 256 systems - Part 4: Fastening systems for steel sleepers in ballast Railway applications - Wheelsets and bogies - Method of specifying the 1094 MTI 146 EN 13749:2021 5020 CEN/TC 256 structural requirements of bogie frames Railway applications - Aerodynamics - Part 5: Requirements and assess- 1095 MTI 146 prEN 14067-5 4020 CEN/TC 256 ment procedures for aerodynamics in tunnels Railway applications - Aerodynamics - Part 7: Fundamentals for test proce- 1096 MTI 146 FprCEN/TR 14067-7 5020 CEN/TC 256 dures for train-induced ballast projection EN 14198:2016+A1:2018/ Railway applications - Braking - Requirements for the brake system of 1097 MTI 146 5020 CEN/TC 256 FprA2 trains hauled by locomotives Railway applications – Infrastructure – Flash butt welding of rails – Part 2: New R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT 1098 MTI 146 prEN 14587-2 rev 3099 CEN/TC 256 and R400HT grade rails by mobile welding machines at sites other than a fixed plant EN 14601:2005+A1:2010/ Railway applications - Straight and angled end cocks for brake pipe and 1099 MTI 146 4020 CEN/TC 256 prA2 main reservoir pipe Railway applications - Welding of railway vehicles and components - Part 1100 MTI 146 prEN 15085-5 4020 CEN/TC 256 5: Inspection, testing and documentation Railway applications - Welding of railway vehicles and components - Part 1101 MTI 146 prEN 15085-3 4020 CEN/TC 256 3: Design requirements Railway applications - Closing and locking devices for payload protecting 1102 MTI 146 EN 15723:2010/prA1 devices against environmental influences - Requirements for durability, 4010 CEN/TC 256 operation, indication, maintenance, recycling

86 Railway applications - Braking systems of high speed trains - Part 1: Re- 1103 MTI 146 EN 15734-1:2010/prA1 4020 CEN/TC 256 quirements and definitions Railway applications - Braking systems of high speed trains - Part 2: Test 1104 MTI 146 EN 15734-2:2010/prA1 4020 CEN/TC 256 methods Railway applications - Markings of railway vehicles - Part 2: External mark- 1105 MTI 146 EN 15877-2:2013/prA1 4010 CEN/TC 256 ings on coaches, motive power units, locomotives and on track machines Railway applications - Strength assessment of railway vehicle structures - 1106 MTI 146 prEN 17149-3 4010 CEN/TC 256 Part 3: Fatigue strength assessment based on cumulative damage Railway applications - Infrastructure - Track alignment design parameters 1107 MTI 146 prEN 17636 4020 CEN/TC 256 for urban rail Small craft - Steering gear - Cable over pulley systems (ISO/DIS 1108 MTI 199 FprEN ISO 8847 5020 CEN/TC 464 8847:2019) 1109 MTI 199 FprEN ISO 10592 Small craft - Remote hydraulic steering systems (ISO/FDIS 10592:2021) 5020 CEN/TC 464 Small craft - Determination of maximum propulsion power rating using 1110 MTI 199 prEN ISO 11592-2 manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 4020 CEN/TC 464 24 m (ISO/FDIS 11592-2:2020) Small craft - Stability and buoyancy assessment and categorization - Part 1111 MTI 199 prEN ISO 12217-3 4020 CEN/TC 464 3: Boats of hull length less than 6 m (ISO/DIS 12217-3:2020) Small craft - Stability and buoyancy assessment and categorization - Part 1112 MTI 199 prEN ISO 12217-2 2: -Sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217- 4020 CEN/TC 464 2:2020) Small craft - Stability and buoyancy assessment and categorization - Part 1113 MTI 199 prEN ISO 12217-1 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO/DIS 4020 CEN/TC 464 12217-1:2020) 1114 MTI 199 FprEN ISO 14946 Small craft - Maximum load capacity (ISO/FDIS 14946:2020) 5020 CEN/SS T01 Aerospace series - Single and multicore electrical cables, screened and 1115 MTI 303 prEN 2235 4010 ASD-STAN/D 2 jacketed - Technical specification Aerospace series - Cable, electrical for digital data transmission - Part 1116 MTI 303 prEN 3375-011 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product 4020 ASD-STAN/D 2 standard Aerospace series - Cable ties for harnesses - Part 005: Plastic cable ties 1117 MTI 303 prEN 4056-005 with metallic locking devices, operating temperatures -65 °C to 105 °C and 4010 ASD-STAN/D 2 -65 °C to 150 °C - Product standard Electronic fee collection - Information exchange between service provision 1118 MTI 345 prEN ISO 12855 4020 CEN/TC 278 and toll charging (ISO/DIS 12855:2020) 1119 MTI 345 prEN 15509 Electronic fee collection - Interoperability application profile for DSRC 4020 CEN/TC 278 Intelligent transport systems - ESafety - eCall high level application re- 1120 MTI 345 prEN 16062 4020 CEN/TC 278 quirements (HLAP) using GSM/UMTS circuit switched networks (2020) Intelligent transport systems - ESafety - Pan-European eCall operating 1121 MTI 345 prEN 16072 4020 CEN/TC 278 requirements Intelligent Transport Systems - eSafety - eCall Interface for PSAPs to 1122 MTI 345 FprCEN/TS 17642 5020 CEN/TC 278 access cargo and dangerous goods databases

87 SECȚIUNEA 3 CAPITOLUL 2

Proiecte de standarde internaţionale ISO-IEC cu faze de vot în 2021 Nota: Lista conține proiecte elaborate în comitetele tehnice de standardizare internaționale în care România este membru participant

Nr Minister CT Indicativ EN Titlu Faza TC Crt 1 MEAT 382 ISO/DIS 12635 Graphic technology -- Plates for offset printing -- Dimensions 4020 ISO/TC 130 Smart community infrastructures -- Guidance on smart transportation 2 MDLPA 397 ISO/DIS 37180 with QR code identification and authentification in transportation and its 4020 ISO/TC 268/SC 1 related or additional services 3 MEAT 109 ISO/DIS 772 Hydrometry -- Vocabulary and symbols 4020 ISO/TC 113 Optics and photonics -- Test methods for telescopic systems -- Part 5: Test 4 MEAT 230 ISO/FDIS 14490-5 4020 ISO/TC 172/SC 4 methods for transmittance Tobacco and tobacco products -- Determination of water content -- 5 MADR 97 ISO/DIS 16632 4020 ISO/TC 126 Gas-chromatographic method 6 MEAT 157 ISO/DIS 24656 Cathodic protection of offshore wind structures 4020 ISO/TC 156 Identification cards -- Integrated circuit cards -- Part 8: Commands and 7 MCID 204 ISO/IEC DIS 7816-8 4020 ISO/IEC JTC 1/SC 17 mechanisms for security operations Hydrometry -- Functional requirements and characteristics of suspend- 8 MEAT 109 ISO/DIS 3716 4020 ISO/TC 113/SC 6 ed-sediment samplers Road vehicles -- In-vehicle Ethernet -- Part 6: Electrical 100-Mbit/s physi- 9 MEAT 78 ISO/DIS 21111-6 4020 ISO/TC 22/SC 31 cal entity requirements and conformance test plan 10 MEAT 392 ISO/DIS 50005 Energy management systems -- Guidelines for a phased implementation 4020 ISO/TC 301 11 MADR 95 ISO/DIS 23781 Operating procedures of pig slaughtering 4020 ISO/TC 34/SC 6 12 MADR 95 ISO/DIS 23855 Frozen surimi -- Specification 4020 ISO/TC 34/SC 6 Smart community infrastructures —Urban data integration framework for 13 MDLPA 397 ISO/DIS 37166 4020 ISO/TC 268/SC 1 smart city planning (SCP) Road vehicles -- Vehicle interface for electronic Periodic Technical Inspec- 14 MEAT 78 ISO/DIS 20730-3 4020 ISO/TC 22/SC 31 tion (ePTI) -- Part 3: Data definitions Quality requirements for fusion welding of metallic materials -- Part 1: 15 MEAT 39 ISO/DIS 3834-1 4020 ISO/TC 44/SC 10 Criteria for the selection of the appropriate level of quality requirements 16 MTI 199 ISO 14946 Small craft -- Maximum load capacity 5020 ISO/TC 188 Corrosion of metals and alloys -- Test method for measuring the stress cor- 17 MEAT 157 ISO 22848:2021 rosion crack growth rate of steels and alloys under static-load conditions 5020 ISO/TC 156 in high-temperature water Electron and laser-beam welded joints -- Requirements and recommenda- 18 MEAT 39 ISO 13919-2:2021 tions on quality levels for imperfections -- Part 2: Aluminium, magnesium 5020 ISO/TC 44/SC 10 and their alloys and pure copper Energy management systems -- Guidance for implementing a common 19 MEAT 392 ISO 50009 5020 ISO/TC 301 energy management system in multiple organizations Rolling bearings -- Radial bearings, retaining slots -- Dimensions, geomet- 20 MEAT 59 ISO/DIS 20515 4020 ISO/TC 4/SC 12 rical product specifications (GPS) and tolerance values Corrosion of metals and alloys -- Rating method by appearance of rust and 21 MEAT 157 ISO/DIS 23721 4020 ISO/TC 156 stains of atmospheric corrosion for stainless steels 22 MADR 95 ISO/DIS 23722 Meat and meat products -- Basic terminology 4020 ISO/TC 34/SC 6 Meat and meat products -- Determination of chloramphenicol content -- 23 MADR 95 ISO/DIS 13493 4020 ISO/TC 34/SC 6 Reference method 24 MAI 376 ISO 22300:2021 Security and resilience -- Vocabulary 5020 ISO/TC 292 25 MADR 95 ISO 24090:2021 Dried barberry -- Specification and test methods 5020 ISO/TC 34/SC 3 Small craft -- Stability and buoyancy assessment and categorization -- Part 26 MTI 199 ISO/FDIS 12217-2 5020 ISO/TC 188 2: Sailing boats of hull length greater than or equal to 6 m Small craft -- Stability and buoyancy assessment and categorization -- Part 27 MTI 199 ISO/FDIS 12217-3 5020 ISO/TC 188 3: Boats of hull length less than 6 m

88 Small craft -- Stability and buoyancy assessment and categorization -- Part 28 MTI 199 ISO/FDIS 12217-1 5020 ISO/TC 188 1: Non-sailing boats of hull length greater than or equal to 6 m Quality requirements for fusion welding of metallic materials -- Part 5: 29 MEAT 39 ISO/DIS 3834-5 Documents with which it is necessary to conform to claim conformity to 4020 ISO/TC 44/SC 10 the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 Ships and marine technology -- Specification for bunkering of liquefied 30 MTI 199 ISO/DIS 20519 4020 ISO/TC 8 natural gas fuelled vessels Restrained joint systems for ductile iron pipelines -- Calculation rules for 31 MEAT 202 ISO/DIS 21052 4020 ISO/TC 5/SC 2 lengths to be restrained Optics and photonics -- Measurement of reflectance of plane surfaces and 32 MEAT 230 ISO 15368 5020 ISO/TC 172/SC 1 transmittance of plane parallel elements Space systems -- Detailed space debris mitigation requirements for launch 33 MTI 72 ISO 20893:2021 5020 ISO/TC 20/SC 14 vehicle orbital stages Space Systems -- Determination of test methods to characterize material 34 MTI 72 ISO/DIS 23020 or component properties required for break-up models used for Earth 4020 ISO/TC 20/SC 14 re-entry Ships and marine technology -- Aquatic nuisance species -- Part 2: Ballast 35 MTI 199 ISO/DIS 11711-2 4020 ISO/TC 8 water sample collection and handling Welding, brazing, soldering, cutting, mechanical joining and adhesive 36 MEAT 39 ISO/DIS 4063 4020 ISO/TC 44/SC 7 bonding -- Nomenclature of processes and reference numbers Welding -- Micro joining of second generation high temperature supercon- 37 MEAT 39 ISO 17279-3:2021 5020 ISO/TC 44/SC 10 ductors -- Part 3: Test methods for joints Industrial furnaces and associated processing equipment -- Safety require- 38 MEAT 225 ISO 23495 5020 ISO/TC 244 ments for steel converter and associated equipment 39 MTI 199 ISO/FDIS 8847 Small craft -- Steering gear -- Cable over pulley systems 5020 ISO/TC 188 Space systems -- Spacecraft system level (RF) performance test in com- 40 MTI 72 ISO/DIS 23569 4020 ISO/TC 20/SC 14 pact range Security and resilience -- Emergency management -- Guidelines for the 41 MAI 376 ISO/DIS 22329 4020 ISO/TC 292 use of social media in emergencies 42 MEAT 56 ISO 37301 Compliance management systems -- Requirements with guidance for use 5020 ISO/TC 309 43 MADR 95 ISO/DIS 23776 Meat and meat products -- Determination of total phosphorous content 4020 ISO/TC 34/SC 6 Meat and meat products -- Determination of L-(+)-glutamic acid content 44 MADR 95 ISO/DIS 4134 4020 ISO/TC 34/SC 6 -- Reference method Space environment (natural and artificial) -- Process-based implementa- 45 MTI 72 ISO/DIS 14200.2 tion of meteoroid and debris environment models (orbital altitudes below 4020 ISO/TC 20/SC 14 GEO + 2 000 km) 46 MADR 95 ISO/DIS 23854 Fermented meat products -- Specification 4020 ISO/TC 34/SC 6 47 MADR 180 ISO 771 Oilseed meals -- Determination of moisture and volatile matter content 5020 ISO/TC 34/SC 2 Petroleum and natural gas industries -- External coatings for buried or 48 MEAT 169 ISO/DIS 21809-2 submerged pipelines used in pipeline transportation systems -- Part 2: 4020 ISO/TC 67/SC 2 Single layer fusion-bonded epoxy coatings Conformity assessment -- General requirements for third-party marks of 49 MEAT 374 ISO/IEC DIS 17030 4020 ISO/CASCO conformity Optics and photonics -- Test methods for telescopic systems -- Part 3: Test 50 MEAT 230 ISO 14490-3 5020 ISO/TC 172/SC 4 methods for telescopic sights ISO 17962:2015/ Agricultural machinery -- Equipment for sowing -- Minimization of the 51 MEAT 77 4020 ISO/TC 23/SC 3 DAmd 1 environmental effects of fan exhaust from pneumatic systems Implants for surgery -- Coatings on metallic surgical implants -- Part 1: 52 MS 377 ISO/DIS 13179-1 Plasma-sprayed coatings derived from unalloyed titanium and TiAl6V4 4020 ISO/TC 150 powders 53 MADR 95 ISO/DIS 6079 Instant tea in solid form -- Specification 4020 ISO/TC 34/SC 8 54 MEAT 78 ISO/DIS 20078-1 Road vehicles -- Extended vehicle (ExVe) web services -- Part 1: Content 4020 ISO/TC 22/SC 31 Optics and photonics -- Optical coatings -- Part 7: Minimum requirements 55 MEAT 230 ISO/DIS 9211-7 4020 ISO/TC 172/SC 3 for neutral beam splitter coatings ISO 20080:2019/ Road vehicles -- Information for remote diagnostic support -- General 56 MEAT 78 4020 ISO/TC 22/SC 31 DAmd 1 requirements, definitions and use cases Quality requirements for fusion welding of metallic materials -- Part 4: 57 MEAT 39 ISO/FDIS 3834-4 5020 ISO/TC 44/SC 10 Elementary quality requirements Quality requirements for fusion welding of metallic materials -- Part 2: 58 MEAT 39 ISO/FDIS 3834-2 5020 ISO/TC 44/SC 10 Comprehensive quality requirements 59 MTI 72 ISO/DIS 14620-3 Space systems -- Safety requirements -- Part 3: Flight safety systems 4020 ISO/TC 20/SC 14 Quality requirements for fusion welding of metallic materials -- Part 3: 60 MEAT 39 ISO/FDIS 3834-3 5020 ISO/TC 44/SC 10 Standard quality requirements Small craft -- Determination of maximum propulsion power rating using 61 MTI 199 ISO/FDIS 11592-2 manoeuvring speed -- Part 2: Craft with a length of hull between 8 m and 5020 ISO/TC 188 24 m

89 Tea -- Determination of theaflavins in black tea -- Method using high 62 MADR 95 ISO/FDIS 18447 5020 ISO/TC 34/SC 8 performance liquid chromatography 63 MADR 95 ISO/FDIS 18449 Green tea -- Vocabulary 5020 ISO/TC 34/SC 8 64 MMAP 52 ISO/FDIS 6107 Water quality -- Vocabulary 5020 ISO/TC 147/SC 1 Ships and marine technology -- Performance test procedures for 65 MTI 199 ISO/FDIS 22547 5020 ISO/TC 8 high-pressure pumps in LNG fuel gas supply systems (FGSS) for ships Guidelines for assessing the adverse environmental impact of fire efflu- 66 MAI 217 ISO/DIS 26367-3 4020 ISO/TC 92/SC 3 ents -- Part 3: Sampling and analysis Road vehicles -- Vehicle interface for electronic Periodic Technical Inspec- 67 MEAT 78 ISO/FDIS 20730-1.2 5020 ISO/TC 22/SC 31 tion (ePTI) -- Part 1: Application and communication requirements 68 MEAT 56 ISO/FDIS 29994 Education and learning services -- Requirements for distance learning 5020 ISO/TC 232 69 MEAT 56 ISO/FDIS 29995 Education and learning services -- Vocabulary 5020 ISO/TC 232 70 MTI 72 ISO/DIS 22893 Space systems -- Software Product Assurance (SPA) 4020 ISO/TC 20/SC 14 Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 4: 71 MEAT 78 ISO/FDIS 13209-4 5020 ISO/TC 22/SC 31 Expanded extensions interface definition 72 MTI 72 ISO/FDIS 24638 Space systems -- Pressure components and pressure system integration 5020 ISO/TC 20/SC 14 73 MS 377 ISO/DIS 9680 Dentistry -- Operating lights 4020 ISO/TC 106/SC 6 Dentistry -- Stationary dental units -- Part 2: Air, water, suction and waste- 74 MS 377 ISO/DIS 7494-2 4020 ISO/TC 106/SC 6 water systems Road vehicles -- Data communication between sensors and data fusion 75 MEAT 78 ISO/FDIS 23150 5020 ISO/TC 22/SC 31 unit for automated driving functions -- Logical interface Interpreting services -- Conference interpreting -- Requirements and 76 MEAT 373 ISO/DIS 23155 4020 ISO/TC 37/SC 5 recommendations Road vehicles -- Vehicle domain service -- Part 1: General information and 77 MEAT 78 ISO/FDIS 23239-1 5020 ISO/TC 22/SC 31 use case definitions Building construction machinery and equipment -- Concrete mixers -- Part 78 MEAT 218 ISO/FDIS 18650-1 5020 ISO/TC 195/SC 1 1: Commercial specifications 79 MS 377 ISO/DIS 9713 Neurosurgical implants -- Self-closing intracranial aneurysm clips 4020 ISO/TC 150 Quality management systems -- Managing an organization for quality 80 MEAT 56 ISO/FDIS 10014 5020 ISO/TC 176/SC 3 results -- Guidance for realizing financial and economic benefits 81 MEAT 230 ISO/FDIS 23364 Optics and Photonics -- Bulk absorption optical filters 5020 ISO/TC 172/SC 3 Road vehicles -- Diagnostic communication over Controller Area Network 82 MEAT 78 ISO/FDIS 15765-5 (DoCAN) -- Part 5: Specification for an in-vehicle network connected to the 5020 ISO/TC 22/SC 31 diagnostic link connector 83 MTI 199 ISO/FDIS 10592 Small craft -- Remote hydraulic steering systems 5020 ISO/TC 188 84 MEAT 89 ISO/FDIS 23632 Industrial valves -- Design validation-testing of valves 5020 ISO/TC 153 Framework for integration and operation of smart community infra- 85 MDLPA 397 ISO/FDIS 37155-2 structures -- Part 2: Holistic approach and the strategy for development, 5020 ISO/TC 268/SC 1 operation and maintenance of smart community infrastructures Assistive products for walking manipulated by both arms -- Requirements 86 MS 377 ISO/FDIS 11199-1 5020 ISO/TC 173 and test methods -- Part 1: Walking frames Meat and meat products -- Detection and determination of colouring 87 MADR 95 ISO/DIS 13496 4020 ISO/TC 34/SC 6 agents Road vehicles -- Interchange of digital information on electrical connec- 88 MEAT 78 ISO/FDIS 11992-3 tions between towing and towed vehicles -- Part 3: Application layer for 5020 ISO/TC 22/SC 31 equipment other than brakes and running gear Ships and marine technology -- Ballast water management systems 89 MTI 199 ISO/DIS 23314-2 (BWMS) -- Part 2: Risk assessment and risk reduction of BWMS using 4020 ISO/TC 8 electrolytic methods 90 MEAT 157 ISO/DIS 12696 Cathodic protection of steel in concrete 4020 ISO/TC 156 Graphic technology -- Process control for the production of half-tone 91 MEAT 382 ISO/FDIS 12647-8 colour separations, proof and production prints -- Part 8: Validation print 5020 ISO/TC 130 processes working directly from digital data Road vehicles -- Unified diagnostic services (UDS) -- Part 2: Session layer 92 MEAT 78 ISO/DIS 14229-2 4020 ISO/TC 22/SC 31 services Smart community infrastructures -- Smart transportation using fuel cell 93 MDLPA 397 ISO/FDIS 37164 5020 ISO/TC 268/SC 1 LRT Energy management systems -- Requirements for bodies providing audit 94 MEAT 392 ISO/FDIS 50003 5020 ISO/TC 301 and certification of energy management systems Tobacco and tobacco products -- Monitor test piece for smoking machine 95 MADR 97 ISO/DIS 16055 4020 ISO/TC 126 -- Requirements and use 96 MEAT 89 ISO/FDIS 10631 Industrial valves - Metallic butterfly valves 5020 ISO/TC 153 Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 2: 97 MEAT 78 ISO/DIS 22900-2 4020 ISO/TC 22/SC 31 Diagnostic protocol data unit (D-PDU API) Road vehicles -- Information for first and second responders -- Part 1: 98 MEAT 78 ISO/DIS 17840-1 4020 ISO/TC 22/SC 36 Rescue sheet for passenger cars and light commercial vehicles

90 99 MEAT 77 ISO/DIS 24378 Feed machinery terminology 4020 ISO/TC 293 Graphic technology -- Processless plates -- Part 1: Evaluation methods for 100 MEAT 382 ISO/DIS 24487-1 4020 ISO/TC 130 characteristics and performance Buildings and civil engineering works -- Vocabulary -- Part 4: Facility 101 MDLPA 335 ISO/FDIS 6707-4 5020 ISO/TC 59/SC 2 management terms 102 MS 377 ISO/DIS 24562 Prosthetics -- Geometrical aspects of lower limb prosthetic adapters 4020 ISO/TC 168 Smart community infrastructures -- Guidance on smart transportation by 103 MDLPA 397 ISO/DIS 37168 4020 ISO/TC 268/SC 1 autonomous shuttle Security and resilience - Security management systems – Requirements 104 MAI 376 ISO/DIS 28000 4020 ISO/TC 292 for the supply chain 105 MEAT 382 ISO/DIS 14298 Graphic technology -- Management of security printing processes 4020 ISO/TC 130 Physical and mechanical properties of wood -- Test methods for small 106 MEAT 118 ISO/DIS 13061-18 4020 ISO/TC 218 clear wood specimens -- Part 18: Vocabulary 107 MEAT 78 ISO/DIS 20078-2 Road vehicles -- Extended vehicle (ExVe) web services -- Part 2: Access 4020 ISO/TC 22/SC 31 108 MEAT 78 ISO/DIS 20078-3 Road vehicles -- Extended vehicle (ExVe) web services -- Part 3: Security 4020 ISO/TC 22/SC 31 109 MEAT 39 ISO/DIS 25901-2 Welding and allied processes -- Vocabulary -- Part 2: Health and safety 4020 ISO/TC 44/SC 7 Smart community infrastructures -- Smart transportation by autonomous 110 MDLPA 397 ISO/DIS 37181 4020 ISO/TC 268/SC 1 vehicle on public roads Simultaneous interpreting delivery platforms -- Requirements and recom- 111 MEAT 373 ISO/DIS 24019 4020 ISO/TC 37/SC 5 mendations 112 MDLPA 365 ISO/DIS 22058 Construction procurement -- Guidance on strategy and tactics 4020 ISO/TC 59/SC 18 Road vehicles -- End-of-life activation of in-vehicle pyrotechnic devices -- 113 MEAT 78 ISO/DIS 26021-1 4020 ISO/TC 22/SC 31 Part 1: Application and communication interface Optics and photonics -- Optical materials and components -- Test method 114 MEAT 230 ISO/DIS 17328 4020 ISO/TC 172/SC 3 for refractive index of infrared optical materials 115 MEAT 59 ISO/DIS 5593 Rolling bearings -- Vocabulary 4020 ISO/TC 4 116 MEAT 39 ISO 13918:2017/DAmd 1 NULL 4020 ISO/TC 44/SC 10 Graphic technology -- File format for quality control and metadata -- Part 117 MEAT 382 ISO/FDIS 20616-1 5020 ISO/TC 130 1: Print requirements eXchange (PRX) 118 MS 377 ISO/FDIS 21856 Assistive products -- General requirements and test methods 5000 ISO/TC 173 Space environment (natural and artificial) -- Modeling of space environ- 119 MTI 72 ISO/PRF TS 22295 5000 ISO/TC 20/SC 14 ment impact on nanostructured materials -- General principles Road construction and maintenance equipment -- Paver-finishers -- Termi- 120 MEAT 218 ISO/FDIS 15878 5000 ISO/TC 195 nology and commercial specifications 121 MEAT 382 ISO/FDIS 22934 Graphic technology -- Communication of offset ink properties 5020 ISO/TC 130 122 MDLPA 335 ISO/PRF TR 23262 GIS (geospatial) / BIM interoperability 5000 ISO/TC 59/SC 13 123 MEAT 109 ISO/FDIS 23350 Hydrometry -- Catching-type liquid precipitation measuring gauges 5020 ISO/TC 113/SC 5 124 MEAT 39 ISO/FDIS 13585 Brazing -- Qualification test of brazers and brazing operators 5000 ISO/TC 44/SC 11 Occupational health and safety management -- Psychological health and 125 MEAT 56 ISO/FDIS 45003 5020 ISO/TC 283 safety at work -- Guidelines for managing psychosocial risks 126 MTI 199 ISO/FDIS 10088 Small craft -- Permanently installed fuel systems 5020 ISO/TC 188 Optics and photonics -- Test method for refractive index of optical glasses 127 MEAT 230 ISO/DIS 21395-2 4000 ISO/TC 172/SC 3 -- Part 2: V-block Refractometer Method Graphic technology -- Prints and printing inks -- Assessment of resistance 128 MEAT 382 ISO/FDIS 2836 5020 ISO/TC 130 of prints to various agents Assistive products for walking manipulated by both arms -- Requirements 129 MS 377 ISO/FDIS 11199-2 5020 ISO/TC 173 and test methods -- Part 2: Rollators ISO 4254-1:2013/ 130 MEAT 77 NULL 5020 ISO/TC 23/SC 3 FDAmd 1.2 Metal valves for use in flanged pipe systems -- Face-to-face and centre-to- 131 MEAT 89 ISO/FDIS 5752 5020 ISO/TC 153 face dimensions Quality management -- Guidance on statistical techniques for ISO 132 MEAT 56 ISO/PRF 10017 5000 ISO/TC 176/SC 3 9001:2015 High-efficiency filters and filter media for removing particles in air -- Part 133 MDLPA 302 ISO/DIS 29463-5 4000 ISO/TC 142 5: Test method for filter elements 134 MTI 199 ISO/FDIS 9094 Small craft -- Fire protection 5000 ISO/TC 188 Optics and photonics -- Test methods for telescopic systems -- Part 5: Test 135 MEAT 230 ISO/FDIS 14490-5 5000 ISO/TC 172/SC 4 methods for transmittance Industrial valves -- Isolating valves for low-temperature applications -- Part 136 MEAT 89 ISO/DIS 28921-1 4000 ISO/TC 153 1: Design, manufacturing and production testing Space systems -- General test methods for space craft, subsystems and 137 MTI 72 ISO/FDIS 15864 5000 ISO/TC 20/SC 14 units

91 Space environment (natural and artificial) -- The Earth's ionosphere model 138 MTI 72 ISO/DIS 16457 -- International reference ionosphere (IRI) model and extensions to the 4020 ISO/TC 20/SC 14 plasmasphere Corrosion of metals and alloys -- Stress corrosion testing -- Part 9: Prepa- 139 MEAT 157 ISO/FDIS 7539-9 ration and use of pre-cracked specimens for tests under rising load or 5000 ISO/TC 156 rising displacement ISO 20193:2019/PRF 140 MADR 97 NULL 5000 ISO/TC 126/SC 1 Amd 1 Petroleum and liquid petroleum products -- Calibration of vertical cylin- 141 MEAT 320 ISO/DIS 7507-2 drical tanks -- Part 2: Optical-reference-line method or electro-optical 4020 ISO/TC 28/SC 2 distance-ranging method 142 MTI 199 ISO/DIS 9650-1 Small craft -- Inflatable liferafts -- Part 1: Type I and II 4020 ISO/TC 188 Ships and marine technology -- Performance test procedures for LNG fuel 143 MTI 199 ISO/FDIS 22548 5000 ISO/TC 8 gas supply systems (FGSS) for ships Ships and marine technology -- Ballast water management systems 144 MTI 199 ISO/FDIS 23152 (BWMS) -- Computational physical modelling and calculations on scaling of 5000 ISO/TC 8 UV reactors Road vehicles -- Prospective safety performance assessment of pre-crash 145 MEAT 78 ISO/PRF TR 21934-1 technology by virtual simulation -- Part 1: State-of-the-art and general 5000 ISO/TC 22/SC 36 method overview Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 2: Core 146 MEAT 78 ISO/DIS 13209-2 4020 ISO/TC 22/SC 31 data model specification and requirements Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 3: 147 MEAT 78 ISO/DIS 13209-3 4020 ISO/TC 22/SC 31 Standard extensions and requirements Road vehicles -- Standardized access to automotive repair and main- 148 MEAT 78 ISO/FDIS 18541-1 tenance information (RMI) -- Part 1: General information and use case 5020 ISO/TC 22/SC 31 definition Road vehicles -- Standardized access to automotive repair and mainte- 149 MEAT 78 ISO/FDIS 18541-2 5020 ISO/TC 22/SC 31 nance information (RMI) -- Part 2: Technical requirements Road vehicles -- Standardized access to automotive repair and mainte- 150 MEAT 78 ISO/FDIS 18541-3 5020 ISO/TC 22/SC 31 nance information (RMI) -- Part 3: Functional user interface requirements Road vehicles -- Standardized access to automotive repair and mainte- 151 MEAT 78 ISO/FDIS 18541-4 5020 ISO/TC 22/SC 31 nance information (RMI) -- Part 4: Conformance test Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 12: 152 MEAT 78 ISO/PRF 21806-12 5000 ISO/TC 22/SC 31 50-Mbit/s balanced media physical layer Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 10: 153 MEAT 78 ISO/PRF 21806-10 5000 ISO/TC 22/SC 31 150-Mbit/s coaxial physical layer Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 11: 154 MEAT 78 ISO/PRF 21806-11 5000 ISO/TC 22/SC 31 150-Mbit/s coaxial physical layer conformance test plan Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 15: Lean 155 MEAT 78 ISO/PRF 21806-15 5000 ISO/TC 22/SC 31 application layer conformance test plan Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 14: Lean 156 MEAT 78 ISO/PRF 21806-14 5000 ISO/TC 22/SC 31 application layer Road vehicles -- Media Oriented Systems Transport (MOST) -- Part 13: 157 MEAT 78 ISO/PRF 21806-13 5000 ISO/TC 22/SC 31 50-Mbit/s balanced media physical layer conformance test plan Smart community infrastructures -- Smart transportation for energy 158 MDLPA 397 ISO/FDIS 37167 5020 ISO/TC 268/SC 1 saving operation by slowly driving intentionally Sustainable cities and communities -- Management guidelines of open 159 MDLPA 397 ISO/DIS 37110 data for smart cities and communities -- Part 1: Overview and general 4000 ISO/TC 268 principles Road vehicles -- Video communication interface for cameras (VCIC) -- Part 160 MEAT 78 ISO/PRF 17215-3 5000 ISO/TC 22/SC 31 3: Camera message dictionary IEC 60050-871/AMD1 Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 871: 161 MCID 173 4020 IEC/TC 1 ED1 Active assisted living (AAL) 162 MCID 375 IEC 63087-1 ED1 Measurement method for assistive listening functionality (TA 16) 4020 IEC/TC 100 Medical electrical equipment —Part 2-90: Particular requirements for 163 MS 22 ISO 80601-2-90 ED1 basic safety and essential performance of respiratory high-flow therapy 4020 IEC/SC 62D equipment Medical electrical equipment - Part 2-74: Particular requirements for basic 164 MS 22 ISO 80601-2-74 ED2 4020 IEC/SC 62D safety and essential performance of respiratory humidifying equipment 165 MEAT 35 IEC 61724-1 ED2 Photovoltaic system performance - Part 1: Monitoring 4020 IEC/TC 82 INDUSTRIAL FACILITY ENERGY MANAGEMENT SYSTEM (FEMS) – Functions 166 MEAT 23 PNW 65-843 ED1 1099 IEC/TC 65 and Information Flows Designation of phase differences by hour numbers in three-phase AC 167 MEAT 2 IEC 60152 ED2 4020 IEC/TC 3 systems Basic and safety principles for man-machine interface, marking and iden- 168 MEAT 2 IEC 60445 ED7 tification - Identification of equipment terminals, conductor terminations 4020 IEC/TC 3 and conductors

92 Industrial systems, installations and equipment and industrial products - 169 MEAT 2 IEC 81346-1 ED2 4020 IEC/TC 3 Structuring principles and reference designations - Part 1: Basic rules Industrial systems, installations and equipment and industrial products - 170 MEAT 2 IEC 81346-1 ED2 4020 IEC/TC 3 Structuring principles and reference designations - Part 1: Basic rules Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 171 MMPS 137 IEC 60079-11 ED7 4020 IEC/SC 31G "i" Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 172 MMPS 137 IEC 60079-11 ED7 4020 IEC/SC 31G "i" Health Software and health IT systems safety, effectiveness and security – 173 MS 22 IEC 81001-5-1 ED1 4020 IEC/SC 62A Part 5-1: Security - Activities in the product lifecycle 174 MEAT 23 IEC 62682 ED2 Management of alarms systems for the process industries 4020 IEC/SC 65A Engineering data exchange format for use in industrial automation 175 MEAT 23 IEC 62714-2 ED2 systems engineering - Automation markup language - Part 2: Semantics 4020 IEC/SC 65E libraries Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description 176 MEAT 30 IEC 61000-2-10 ED2 4020 IEC/SC 77C of HEMP environment - Conducted disturbance Transmitting Equipment for Radiocommunication – Radio spectrum mea- 177 MCID 6 IEC TR 63352 ED1 5020 IEC/TC 103 surement method - 300-GHz Spectrum Measurement equipment Transmitting equipment for radiocommunication - Radio-over-fibre tech- 178 MCID 6 IEC TR 63099-3 ED1 5020 IEC/TC 103 nologies for electromagnetic-field measurement - Charging cables for electric vehicles of rated voltages up to and including 179 MEAT 159 IEC TS 62893-4-2 ED1 0,6/1 kV - Part 4-2: Cables for DC charging according to mode 4 of IEC 5020 IEC/TC 20 61851-1 intended to be used with a thermal management system 180 MEAT 35 IEC TS 63209-1 ED1 Extended-stress testing of photovoltaic modules - Part 1: Modules 5020 IEC/TC 82 Explosive atmospheres – Part 26: Equipment with Separation Elements or 181 MMPS 137 IEC 60079-26 ED4 5020 IEC/TC 31 combined Levels of Protection Nuclear instrumentation - Housed scintillators - Test methods of light 182 MEAT 16 IEC 62372 ED2 5020 IEC/TC 45 output and intrinsic resolution Thermocouples - Part 3: Extension and compensating cables - Tolerances 183 MEAT 23 IEC 60584-3 ED3 5020 IEC/SC 65B and identification system Terrestrial photovoltaic (PV) modules - Design qualification and type 184 MEAT 35 IEC 61215-1-1 ED2 approval - Part 1-1: Special requirements for testing of crystalline silicon 5020 IEC/TC 82 photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 185 MEAT 35 IEC 61215-1-2 ED2 approval - Part 1-2: Special requirements for testing of thin-film Cadmium 5020 IEC/TC 82 Telluride (CdTe) based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type ap- 186 MEAT 35 IEC 61215-1-3 ED2 proval - Part 1-3: Special requirements for testing of thin-film amorphous 5020 IEC/TC 82 silicon based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 187 MEAT 35 IEC 61215-1-4 ED2 approval - Part 1-4: Special requirements for testing of thin-film Cu(In,GA) 5020 IEC/TC 82 (S,Se)2 based photovoltaic (PV) modules Terrestrial photovoltaic (PV) modules - Design qualification and type 188 MEAT 35 IEC 61215-1 ED2 5020 IEC/TC 82 approval - Part 1: Test requirements Terrestrial photovoltaic (PV) modules - Design qualification and type 189 MEAT 35 IEC 61215-2 ED2 5020 IEC/TC 82 approval - Part 2: Test procedures Multimedia systems and equipment for cars - Configurable Car Infotain- 190 MCID 375 IEC 63246-2 ED1 4020 IEC/TC 100 ment Services (CCIS) – Part 2: Requirements (TA 17) Multimedia systems and equipment for cars - Configurable Car Infotain- 191 MCID 375 IEC 63246-3 ED1 4020 IEC/TC 100 ment Services (CCIS) – Part 3: Framework (TA 17) Multimedia systems and equipment for cars - Configurable Car Infotain- 192 MCID 375 IEC 63246-3 ED1 4020 IEC/TC 100 ment Services (CCIS) – Part 3: Framework (TA 17) Digital audio - Interface for nonlinear PCM encoded audio bitstreams 193 MCID 375 IEC 61937-11 ED2 applying IEC 60958 - Part 11: MPEG-4 AAC and its extensions and MPEG-D 4020 IEC/TC 100 USAC in LATM/LOAS (TA 20) Amendment 1 - High-voltage switchgear and controlgear - Part 1: Common 194 MEAT 8 IEC 62271-1/AMD1 ED2 4020 IEC/TC 17 specifications for alternating current switchgear and controlgear Digital addressable lighting interface – Part 150: Particular requirements - 195 MEAT 131 IEC 62386-150 ED1 4020 IEC/TC 34 Auxiliary Power Supply Digital addressable lighting interface – Part 250: Particular requirements 196 MEAT 131 IEC 62386-250 ED1 4020 IEC/TC 34 – Integrated Power Supply (Device Type 49) Digital addressable lighting interface – Part 250: Particular requirements 197 MEAT 131 IEC 62386-250 ED1 4020 IEC/TC 34 – Integrated Power Supply (Device Type 49) Digital addressable lighting interface – Part 251: Particular requirements – 198 MEAT 131 IEC 62386-251 ED1 4020 IEC/TC 34 Memory bank 1 extension (Device Type 50) Digital addressable lighting interface – Part 251: Particular requirements – 199 MEAT 131 IEC 62386-251 ED1 4020 IEC/TC 34 Memory bank 1 extension (Device Type 50) Digital addressable lighting interface – Part 252: Particular requirements – 200 MEAT 131 IEC 62386-252 ED1 4020 IEC/TC 34 Energy Reporting (Device Type 51)

93 Digital addressable lighting interface – Part 252: Particular requirements – 201 MEAT 131 IEC 62386-252 ED1 4020 IEC/TC 34 Energy Reporting (Device Type 51) Digital addressable lighting interface – Part 253: Particular requirements 202 MEAT 131 IEC 62386-253 ED1 4020 IEC/TC 34 – Diagnostics and maintenance (Device Type 52) Digital addressable lighting interface – Part 253: Particular requirements 203 MEAT 131 IEC 62386-253 ED1 4020 IEC/TC 34 – Diagnostics and maintenance (Device Type 52) Nuclear power plants - Instrumentation and control important to safety 204 MEAT 16 IEC/IEEE 62582-2 ED2 - Electrical equipment condition monitoring methods - Part 2: Indenter 4020 IEC/SC 45A measurements Nuclear power plants - Instrumentation and control important to safety 205 MEAT 16 IEC/IEEE 62582-4 ED2 - Electrical equipment condition monitoring methods - Part 4: Oxidation 4020 IEC/SC 45A induction techniques Radiation protection instrumentation - Backpack-type radiation detector 206 MEAT 16 IEC 62694 ED2 4020 IEC/SC 45B (BRD) for the detection of illicit trafficking of radioactive material 207 MS 22 IEC 62304 Ed. 2 Health software - Software life cycle processes 4020 IEC/SC 62A Industrial platinum resistance thermometers and platinum temperature 208 MEAT 23 IEC 60751 ED3 4020 IEC/SC 65B sensors Amendment 1 - Photovoltaic (PV) module safety qualification - Part 1: 209 MEAT 35 IEC 61730-1/AMD1 ED2 4020 IEC/TC 82 Requirements for construction Amendment 1 - Photovoltaic (PV) module safety qualification - Part 2: 210 MEAT 35 IEC 61730-2/AMD1 ED2 4020 IEC/TC 82 Requirements for testing Amendment 1 - Photovoltaic (PV) module safety qualification - Part 2: 211 MEAT 35 IEC 61730-2/AMD1 ED2 4020 IEC/TC 82 Requirements for testing Measurement procedures for materials used in photovoltaic modules - 212 MEAT 35 IEC 62788-2-1 ED1 Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety require- 4020 IEC/TC 82 ments Measurement procedures for materials used in photovoltaic modules - 213 MEAT 35 IEC 62788-2-1 ED1 Part 2-1: Polymeric materials - Frontsheet and backsheet - Safety require- 4020 IEC/TC 82 ments ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000V AC AND 1500V DC-EQUIPMENT FOR TESTING;MEASURING AND 214 MEAT 166 IEC 61557-17 ED1 4020 IEC/TC 85 MONITORING OF PROTECTIVE MEASURES-Part 17: Non contact voltage indicators Spatial wireless power transfer based on multiple magnetic resonances - 215 MCID 375 IEC 63245-1 ED1 5020 IEC/TC 100 Part 1: Requirements Subsea equipment - Part 1: Power connectors, penetrators and jumper 216 MTI 143 IEC/IEEE 61886-1 ED1 assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax 5020 IEC/TC 18 = 36 kV) Explosive atmospheres – Part 26: Equipment with Separation Elements or 217 MMPS 137 IEC 60079-26 ED4 5020 IEC/TC 31 combined Levels of Protection Health software and health IT systems safety, effectiveness and security — 218 MS 22 ISO 81001-1 ED1 5020 IEC/SC 62A Part 1: Principles and concepts Thermocouples - Part 3: Extension and compensating cables - Tolerances 219 MEAT 23 IEC 60584-3 ED3 5020 IEC/SC 65B and identification system Safety requirements for electrical equipment for measurement, control, 220 MEAT 24 IEC 61010-2-130 ED1 and laboratory use - Particular requirements for equipment intended to be 5020 IEC/TC 66 used in educational establishments by children Terrestrial photovoltaic (PV) modules - Design qualification and type 221 MEAT 35 IEC 61215-1 ED2 5020 IEC/TC 82 approval - Part 1: Test requirements 222 MEAT 2 PNW TS 3-1471 ED1 Representation of communication in power utility automation 1099 IEC/TC 3 Parasitic communication protocol for radio-frequency wireless power 223 MCID 375 IEC 62980 ED1 4020 IEC/TC 100 transmission (TA 15) Management and Interfaces for WPT - Device to device wireless charging 224 MCID 375 IEC 63254 ED1 4020 IEC/TC 100 (D2DWC) for mobile devices with wireless power TX/RX module (TA 15) Amendment 2 - Multimedia systems and equipment - Colour measurement IEC 61966-2-4/AMD2 225 MCID 375 and management - Part 2-4: Colour management - Extended-gamut YCC 4020 IEC/TC 100 ED1 colour space for video applications - xvYCC (TA 2) Amendment 2 - Multimedia systems and equipment - Colour measurement IEC 61966-2-4/AMD2 226 MCID 375 and management - Part 2-4: Colour management - Extended-gamut YCC 4020 IEC/TC 100 ED1 colour space for video applications - xvYCC (TA 2) 227 MCID 375 IEC 60958-3 ED4 Digital audio interface - Part 3: Consumer applications (TA 20) 4020 IEC/TC 100 228 MCID 375 IEC 60958-1 ED4 Digital audio interface - Part 1: General (TA 20) 4020 IEC/TC 100 Portable multimedia equipment – Determination of battery duration – 229 MCID 375 IEC 63296-1 ED1 4020 IEC/TC 100 Part 1: Powered loudspeaker equipment (TA 19) IEC/IEEE 80005-1/ Amendment 1 - Utility connections in port - Part 1: High voltage shore 230 MTI 143 4020 IEC/TC 18 AMD1 ED2 connection (HVSC) systems - General requirements Electrical installations in ships - Part 503: Special features - AC supply 231 MTI 143 IEC 60092-503 ED3 4020 IEC/TC 18 systems with voltages in the range of above 1 kV up to and including 15 kV

94 Test methods for electric cables with rated voltages up to and including 232 MEAT 159 IEC 63294 ED1 4020 IEC/TC 20 450/750 V Heating cables with a rated voltage of 300/500 V for comfort heating and 233 MEAT 159 IEC 60800 ED4 4020 IEC/TC 20 prevention of ice formation Organic Light Emitting Diode (OLED) for general lighting – Safety – Part 234 MEAT 131 IEC 62868-2-3 ED1 4020 IEC/SC 34A 2-3: Particular requirements - Flexible OLED tiles and panels Nuclear power plants - Instrumentation and control systems important to 235 MEAT 16 IEC 63186 ED1 4020 IEC/SC 45A safety - Criteria for seismic trip system Nuclear power plants - Instrumentation systems important to safety - 236 MEAT 16 IEC 60910 ED2 Containment monitoring for early detection of developing deviations from 4020 IEC/SC 45A normal operation in light water reactors 237 MS 22 IEC 62304 Ed. 2 Health software - Software life cycle processes 4020 IEC/SC 62A Refurbishment of medical electrical equipment, medical electrical 238 MS 22 IEC 63120 ED1 systems and sub-assemblies and reuse of components as part of the 4020 IEC/SC 62A extended life-cycle Amendment 1 - Industrial communication networks - Installation of com- 239 MEAT 23 IEC 61918/AMD1 ED4 4020 IEC/SC 65C munication networks in industrial premises Electrical measuring transducers for converting AC and DC electrical quan- 240 MEAT 166 IEC 60688 ED4 4020 IEC/TC 85 tities to analogue or digital signals Spatial wireless power transfer based on multiple magnetic resonances - 241 MCID 375 IEC 63245-1 ED1 5020 IEC/TC 100 Part 1: Requirements Conduit systems for cable management - Part 21: Particular requirements 242 MEAT 11 IEC 61386-21 ED2 5020 IEC/SC 23A - Rigid conduit systems Conduit Systems for cable management - Part 22: Particular requirements 243 MEAT 11 IEC 61386-22 ED2 5020 IEC/SC 23A - Pliable conduit systems Conduit systems for cable management - Part 23: Particular requirements 244 MEAT 11 IEC 61386-23 ED2 5020 IEC/SC 23A - Flexible conduit systems Lamps and light sources for road vehicles - Dimensional, electrical and 245 MEAT 131 IEC 60809 ED4 5020 IEC/SC 34A luminous requirements Nuclear facilities - Instrumentation important to safety - Spent fuel pool 246 MEAT 16 IEC/IEEE 63113 ED1 5020 IEC/SC 45A instrumentation Amendment 2 - Medical electrical equipment - Part 2-63: Particular IEC 60601-2-63/AMD2 247 MS 22 requirements for the basic safety and essential performance of dental 5020 IEC/SC 62B ED1 extra-oral X-ray equipment Amendment 2 - Medical electrical equipment - Part 2-65: Particular IEC 60601-2-65/AMD2 248 MS 22 requirements for the basic safety and essential performance of dental 5020 IEC/SC 62B ED1 intra-oral X-ray equipment Medical electrical equipment - Part 2-87: Particular requirements for the 249 MS 22 ISO 80601-2-87 ED1 basic safety and essential performance of high frequency critical care 5020 IEC/SC 62D ventilators Safety requirements for electrical equipment for measurement, control, 250 MEAT 24 IEC 61010-2-130 ED1 and laboratory use - Particular requirements for equipment intended to be 5020 IEC/TC 66 used in educational establishments by children Amendment 1 - Photovoltaic power generating systems - EMC require- 251 MEAT 35 IEC 62920/AMD1 ED1 5020 IEC/TC 82 ments and test methods for power conversion equipment Amendment 1 - Photovoltaic power generating systems - EMC require- 252 MEAT 35 IEC 62920/AMD1 ED1 5020 IEC/TC 82 ments and test methods for power conversion equipment Electrical safety in low voltage distribution systems up to 1 000 V AC and 253 MEAT 166 IEC 61557-12/AMD1 ED2 1 500 V DC - Equipment for testing, measuring or monitoring of protective 5020 IEC/TC 85 measures - Part 12: Power metering and monitoring devices (PMD) Nuclear power plants - Instrumentation and control systems important to 254 MEAT 16 IEC 63186 ED1 4020 IEC/SC 45A safety - Criteria for seismic trip system Measurement procedures for materials used in photovoltaic modules 255 MEAT 35 IEC 62788-7-3 ED1 - Part 7-3: Environmental exposures - Accelerated abrasion tests of PV 4020 IEC/TC 82 module external surfaces Electrical measuring transducers for converting AC and DC electrical quan- 256 MEAT 166 IEC 60688 ED4 4020 IEC/TC 85 tities to analogue or digital signals General requirements for Home and Building Electronic Systems (HBES) 257 MEAT 11 IEC TR 63044-2 ED1 5020 IEC/TC 23 and Building Automation and Control Systems (BACS) - Workplace atmospheres – Part 2: Gas detectors – Selection, installation, 258 MMPS 137 IEC 62990-2 ED1 5020 IEC/TC 31 use and maintenance of detectors for toxic gases and vapours Nuclear facilities - Instrumentation important to safety - Spent fuel pool 259 MEAT 16 IEC/IEEE 63113 ED1 5020 IEC/SC 45A instrumentation Nuclear power plants - Instrumentation systems important to safety - In- 260 MEAT 16 IEC 61468 ED2 core instrumentation: Characteristics and test methods of self-powered 5020 IEC/SC 45A neutron detectors Safety, effectiveness and security in the implementation and use of con- 261 MS 22 IEC 80001-1 ED2 nected medical devices or connected health software - Part 1: Application 5020 IEC/SC 62A of risk management

95 Industrial communication networks - Profiles - Part 3-X: Functional safety 262 MEAT 23 IEC 61784-3-X ED4 5020 IEC/SC 65C fieldbuses - Additional specifications for CPF X Precision clock synchronization protocol for networked measurement and 263 MEAT 23 IEC 61588 ED3 5020 IEC/SC 65C control systems Electrical safety in low voltage distribution systems up to 1 000 V AC and 264 MEAT 166 IEC 61557-12/AMD1 ED2 1 500 V DC - Equipment for testing, measuring or monitoring of protective 5020 IEC/TC 85 measures - Part 12: Power metering and monitoring devices (PMD) Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating trans- 265 MEAT 312 IEC 61558-2-1 ED3 5020 IEC/TC 96 formers and power supplies incorporating separating transformers for general applications

96 SECȚIUNEA 4 CAPITOLUL 1

Standarde române originale în vigoare propuse a fi supuse procedurii de examinare

Nr crt Minister CT Indicativ SR Titlu

1 MEAT 24 STAS 8147/1-80 Tensometrie electrică rezistivă. Terminologie Perturbaţii radioelectrice. Linii aeriene de transport de energie electrică de înaltă tensiune şi echipa- 2 MEAT 30 STAS 6048/8-71 ment de linie. Metode speciale de încercare 3 MEAT 131 STAS 10876/1-88 Lămpi electrice cu incandescenţă pentru aeronave. Condiţii tehnice generale de calitate Lămpi electrice cu incandescenţă pentru aeronave. Lămpi subminiatură. Condiţii tehnice speciale de 4 MEAT 131 STAS 10876/2-84 calitate Lămpi electrice cu incandescenţă pentru aeronave. Lămpi miniatură. Condiţii tehnice speciale de 5 MEAT 131 STAS 10876/3-84 calitate 6 MEAT 131 STAS 10270/1-85 Lămpi electrice cu incandescenţă pentru vehicule de cale ferată. Condiţii tehnice generale de calitate 7 MEAT 131 STAS 10270/2-86 Lămpi electrice cu incandescenţă pentru locomotive electrice. Dimensiuni şi caracteristici principale 8 MEAT 131 STAS 10270/3-85 Lămpi electrice cu incandescenţă pentru locomotive Diesel. Dimensiuni şi caracteristici principale 9 MEAT 131 STAS 10270/4-86 Lămpi electrice cu incandescenţă pentru vagoane de călători. Dimensiuni şi caracteristici principale Lămpi electrice cu incandescenţă pentru aeronave. Lămpi miniatură cu puteri peste 5 W. Condiţii 10 MEAT 131 STAS 10876/4-84 tehnice speciale de calitate 11 MEAT 131 STAS 3008-85 Lămpi electrice cu incandescenta. Clasificare 12 MEAT 131 STAS 3009-90 Lămpi electrice cu incandescenţă de format normal. Tensiuni şi puteri nominale 13 MEAT 131 STAS 9866-74 Corpuri de iluminat industriale. Iluminatul local al locului de muncă. Prescripţii de proiectare Lămpi electrice cu incandescenţă pentru semnalizare optică pe calea ferată. Condiţii tehnice de 14 MEAT 131 STAS 12014-81 calitate 15 MEAT 131 STAS 7624-90 Lămpi electrice cu incandescenţă pentru lanterne 16 MEAT 131 STAS 4986-90 Lanterne electrice de uz general. Condiţii tehnice generale de calitate 17 MEAT 161 STAS 11530-91 Electrozi pentru baterii. Formă şi dimensiuni 18 MEAT 161 STAS 12191/1-90 Acumulatoare staţionare acide, cu plăci pozitive tubulare. Condiţii tehnice generale de calitate 19 MEAT 161 STAS 12191/2-90 Acumulatoare staţionare acide, cu plăci pozitive tubulare. Caracteristici principale şi dimensiuni Acumulatoare acide cu plumb pentru telecomunicaţii şi laboratoare. Condiţii tehnice generale de 20 MEAT 161 STAS 443-89 calitate Acumulatoare acide cu plumb, cu plăci pozitive de mare suprafaţă. Condiţii tehnice generale de 21 MEAT 161 STAS 445/1-75 calitate 22 MEAT 161 STAS 9616-88 Cleme pentru acumulatoare. Dimensiuni Acumulatoare acide cu plumb cu plăci pozitive de mare suprafaţă. Dimensiuni şi caracteristici elec- 23 MEAT 161 STAS 445/2-75 trice principale Încrucişări între liniile de contact pentru tramvaie şi troleibuze şi linii electrice aeriene sau linii 24 MEAT 165 STAS 8074-76 aeriene de telecomunicaţii. Prescripţii Utilizarea în comun a stâlpilor pentru linii de energie electrică, linii de tracţiune electrică urbană, 25 MEAT 165 SR 831:2002 instalaţii de telecomunicaţii inclusiv reţele de televiziune prin cablu şi alte utilităţi 26 MEAT 165 SR 6290:2004 Încrucişări între liniile de energie electrică şi liniile de telecomunicaţii 27 MEAT 165 SR 832:2008 Influenţe ale instalaţiilor electrice de înaltă tensiune asupra liniilor de telecomunicaţii. Prescripţii 28 MEAT 165 SR 234:2008 Branşamente electrice. Prescripţii generale de proiectare şi executare Linii electrice aeriene de tensiune alternativă mai mare de 1 kV. Partea 2-24: Aspectele normativelor 29 MEAT 165 SR EN 50341-2-24:2019 naţionale (NNA) pentru România (pe baza EN 50341-1:2012) 30 MCID 173 STAS 8303-88 Energetică generală. Terminologie 31 MCID 173 STAS 12283-84 Producerea, transportul şi distribuţia energiei electrice. Terminologie 32 MCID 173 STAS 2551-69 Instalaţii de producere a energiei electrice. Puteri. Terminologie. 33 MEAT 333 STAS 960-80 Conducte de aprindere pentru autovehicule 34 MEAT 333 STAS 5518/2-82 Bujii pentru motoare cu aprindere prin scânteie. Valoare termică

97 35 MDLPA 321 SR 2833:2009 Încercări pe betoane. Determinarea contracţiei axiale a betonului întărit Stâlpi prefabricaţi din beton armat şi beton precomprimat pentru linii electrice aeriene. Condiţii 36 MDLPA 321 SR 2970:2005 tehnice generale de calitate Betoane de ciment. Prescripţii pentru stabilirea agresivităţii apei faţă de betoanele construcţiilor 37 MDLPA 321 STAS 3349/2-83 hidroenergetice Încercări pe betoane. Determinarea rezistenţei la îngheţ-dezgheţ prin măsurarea variaţiei rezistenţei 38 MDLPA 321 SR 3518:2009 la compresiune şi/sau modulului de elasticitate dinamic relativ 39 MDLPA 321 STAS 4606-80 Agregate naturale grele pentru betoane şi mortare cu lianţi minerali. Metode de încercare 40 MDLPA 321 SR 5440:2009 Încercări pe betoane. Verificarea potenţialului de reacţie alcalii - silice pentru agregate 41 MDLPA 321 STAS 5511-89 Încercări pe betoane. Determinarea aderenţei dintre beton şi armatură. Metoda prin smulgere 42 MDLPA 321 STAS 6102-86 Betoane pentru construcţii hidrotehnice. Clasificare şi condiţii tehnice de calitate 43 MDLPA 321 STAS 7343-80 Agregate minerale uşoare. Granulit Tipare metalice pentru elemente prefabricate de beton, beton armat şi beton precomprimat. Condiţii 44 MDLPA 321 STAS 7721-90 tehnice de calitate 45 MDLPA 321 STAS 8177-68 Agregate din zgură expandată pentru betoane uşoare 46 MDLPA 321 STAS 8047/1-92 Bolţari şi bandaje pentru susţinerea lucrărilor miniere subterane. Condiţii tehnice generale de calitate 47 MDLPA 321 STAS 8047/2-91 Bolţari şi bandaje din beton pentru susţinerea lucrărilor miniere. Forme şi dimensiuni Panouri prefabricate din beton armat pentru susţinerea lucrărilor miniere subterane. Condiţii tehnice 48 MDLPA 321 STAS 13093/1-92 generale de calitate Panouri prefabricate din beton armat pentru susţinerea lucrărilor miniere subterane. Forme şi dimen- 49 MDLPA 321 STAS 13093/2-92 siuni 50 MDLPA 321 STAS 13101-92 Panouri prefabricate din beton armat pentru vatra lucrărilor miniere subterane 51 MDLPA 321 SR 13379:1997 Betoane şi mortare de ciment. Estimarea penetrării accelerate a dioxidului de carbon 52 MDLPA 321 SR 13382:1997 Betoane şi mortare de ciment. Estimarea penetrării accelerate a ionilor de clor Beton. Partea 1: Specificaţie, performanţă, producţie şi conformitate. Document naţional de aplicare 53 MDLPA 321 SR 13510:2006 a SR EN 206-1 Evaluarea agresivităţii apei, solului şi gazelor asupra betonului. Prelevarea şi analizarea eşantioanelor 54 MDLPA 321 SR 13536:2009 de apă şi sol 55 MDLPA 321 SR 13535:2009 Metodă de încercare pentru conţinutul de aer din betonul proaspăt prin metoda volumetrică SR 13510:2006/ Beton. Partea 1: Specificaţie, performanţă, producţie şi conformitate. Document naţional de aplicare 56 MDLPA 321 C91:2008 a SR EN 206-1 Beton. Partea 1: Specificaţie, performanţă, producţie şi conformitate. Document naţional de aplicare 57 MDLPA 321 SR 13510:2006/A1:2012 a SR EN 206-1 Certificarea calificării profesionale a întreprinderilor din construcţii. Partea 1: Cerinţe generale pentru 58 MDLPA 365 SR 13476-1:2003 organismele de certificare Certificarea calificării profesionale a întreprinderilor din construcţii. Partea 2: Criterii pentru certifi- 59 MDLPA 365 SR 13476-2:2003 care 60 MDLPA 365 STAS 4908-85 Clădiri civile, industriale şi agrozootehnice. Arii şi volume convenţionale 61 MTI 4 STAS R 12407-86 Maşini electrice rotative pentru vehicule feroviare şi rutiere. Criterii de apreciere a comutaţiei 62 MTI 4 STAS 7069-90 Automatică şi telemecanică feroviară. Semne convenţionale

98 SECȚIUNEA 4 CAPITOLUL 2 Teme de standarde române originale noi propuse a fi elaborate

Nr Minister CT Indicativ SR Titlu crt Agricultură ecologică. Cerințe și recomandări pentru valorificarea condițiilor pedocli- 1 MADR 95 SR 13595:2020 matice, a biodiversității și a structurii suprafețelor cultivabile ecologic și/sau din flora spontană/arii protejate/zone asimilate

2 MADR 367 SR 13592:2020 CIDRU

Semnalizare rutieră. Indicatoare și mijloace de semnalizare rutieră. Partea 1: Clasifi- 3 MDLPA 187 SR 1848-1:2011/A91:2021 care, simboluri și amplasare

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 1: Clasifi- 4 MDLPA 187 SR 1848-1:2021 care, simboluri şi amplasare

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 2: Condiţii 5 MDLPA 187 SR 1848-2:2021 tehnice

Semnalizare rutieră. Indicatoare şi mijloace de semnalizare rutieră. Partea 3: Scriere, 6 MDLPA 187 SR 1848-3:2021 mod de alcătuire

7 MDLPA 187 SR 1848-7:2015/A91:2021 Semnalizare rutieră. Marcaje rutiere

Performanţa energetică a clădirilor. Evaluarea de ansamblu a PEC. Partea 1: Cadru 8 MDLPA 281 SR EN ISO 52000-1:2017/NA:2020 general şi metode

Performanţa energetică a clădirilor. Indicatori, cerinţe, evaluare şi certificate. Partea 1: 9 MDLPA 281 SR EN ISO 52003-1:2017/NA:2020 Aspecte generale şi aplicarea la performanţa energetică globală

Performanţa energetică a clădirilor. Condiţii climatice exterioare. Partea 1: Prelucrarea 10 MDLPA 281 SR EN ISO 52010-1:2017/NA:2020 datelor climatice pentru calculele energetice

Performanţa energetică a clădirilor. Necesarul de energie pentru încălzire şi răcire, 11 MDLPA 281 SR EN ISO 52016-1:2017/NA:2020 temperaturi interioare şi sarcini termice sensibile şi latente. Partea 1: Metode de calcul Performanţa energetică a clădirilor. Indicatori pentru cerinţe PEC parţiale referitoare la 12 MDLPA 281 SR EN ISO 52018-1:2018/NA:2020 bilanţul termic energetic şi la caracteristicile elementelor de clădire. Partea 1: Prezen- tare generală a opţiunilor

13 MEAT 125 SR EN 71-1+A1:2018/C91:2021 Siguranța jucăriilor. Partea 1: Proprietăţi mecanice şi fizice

Etanol - component de amestec pentru benzină. Determinarea concentrației de apă. 14 MEAT 320 SR EN 15489:2008/C91:2021 Metoda titrării culometrice Karl Fischer

15 MTI 146 SR 1521:2021 Material mărunt de cale ferată. Tirfoane

99 SECȚIUNEA 5 CAPITOLUL 1

Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin publicarea versiunii române

Nr Minister CT Indicativ international Titlu TC crt

Information and documentation -- International standard identifier for libraries and 1 MCID 229 ISO 15511:2019 ISO/TC 46/SC 4 related organizations (ISIL)

Information and documentation -- The Dublin Core metadata element set -- Part 1: 2 MCID 229 ISO 15836-1:2017 ISO/TC 46/SC 4 Core elements

Information and documentation -- The Dublin Core metadata element set -- Part 2: 3 MCID 229 ISO 15836-2:2019 ISO/TC 46/SC 4 DCMI Properties and classes

4 MCID 229 ISO/TR 21946:2018 Information and documentation -- Appraisal for managing records ISO/TC 46/SC 11

Sustainable development in communities -- Management system for sustainable 5 MCID 397 ISO 37101:2016 ISO/TC 268 development -- Requirements with guidance for use

Sampling procedures for inspection by attributes -- Part 4: Procedures for assess- 6 MEAT 56 ISO 2859-4:2020 ISO/TC 69/SC 5 ment of declared quality levels

Sampling procedures for inspection by attributes -- Part 5: System of sequential 7 MEAT 56 ISO 2859-5:2005 ISO/TC 69/SC 5 sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection Accuracy (trueness and precision) of measurement methods and results -- Part 2: 8 MEAT 56 ISO 5725-2:2019 Basic method for the determination of repeatability and reproducibility of a stan- ISO/TC 69/SC 6 dard measurement method Sampling procedures for inspection by attributes -- Introduction to the ISO 2859 9 MEAT 56 ISO 28590:2017 ISO/TC 69/SC 5 series of standards for sampling for inspection by attributes

10 MEAT 56 ISO 37500:2014 Guidance on outsourcing ISO/TC 286

Textiles -- Methods for analysis of woven fabrics construction -- Part 5: Determina- 11 MEAT 103 ISO 7211-5:2020 ISO/TC 38/SC 24 tion of linear density of yarn removed from fabric

12 MEAT 357 ISO 19230:2020 Gas analysis -- Sampling guidelines ISO/TC 158

Natural gas -- Upstream area -- Determination of composition by Laser Raman 13 MEAT 357 ISO 23978:2020 ISO/TC 193/SC 3 spectroscopy

Conformity assessment -- Guidelines and examples of a scheme for the certifica- 14 MEAT 374 ISO/IEC TR 17032:2019 ISO/CASCO tion of processes

Energy management systems -- Guidance for the implementation, maintenance 15 MEnergie 392 ISO 50004:2020 ISO/TC 301 and improvement of an ISO 50001 energy management system Energy management systems -- Measuring energy performance using energy 16 MEnergie 392 ISO 50006:2014 baselines (EnB) and energy performance indicators (EnPI) -- General principles and ISO/TC 301 guidance Energy services -- Guidelines for the assessment and improvement of the energy 17 MEnergie 392 ISO 50007:2017 ISO/TC 301 service to users

Energy management and energy savings -- Building energy data management for 18 MEnergie 392 ISO/TS 50008:2018 ISO/TC 301 energy performance -- Guidance for a systemic data exchange approach

Energy management systems -- Measurement and verification of energy perfor- 19 MEnergie 392 ISO 50015:2014 ISO/TC 301 mance of organizations -- General principles and guidance

100 Energy management and energy savings -- General guidelines for selecting energy 20 MEnergie 392 ISO 50021:2019 ISO/TC 301 savings evaluators

21 MEnergie 392 ISO/TS 50044:2019 Energy saving projects (EnSPs) -- Guidelines for economic and financial evaluation ISO/TC 301

22 MEnergie 392 ISO 50045:2019 Technical guidelines for the evaluation of energy savings of thermal power plants ISO/TC 301

23 MEnergie 392 ISO 50046:2019 General methods for predicting energy savings ISO/TC 301

24 MEnergie 392 ISO 50047:2016 Energy savings -- Determination of energy savings in organizations ISO/TC 301

101 SECȚIUNEA 5 CAPITOLUL 2

Standarde internaţionale ISO-IEC propuse a se adopta ca standarde române prin metoda filei de confirmare

Nr Minister CT IndicativDocRef Titlu_EN TC crt

Information security -- Key management -- Part 5: Group key manage- 1 MCID 208 ISO/IEC 11770-5:2020 ISO/IEC JTC 1/SC 27 ment

Information technology -- Service management -- Part 1: Service 2 MCID 208 ISO/IEC 20000-1:2018 ISO/IEC JTC 1/SC 40 management system requirements

Information technology -- Service management -- Part 10: Concepts 3 MCID 208 ISO/IEC 20000-10:2018 ISO/IEC JTC 1/SC 40 and vocabulary

Information technology -- Service management -- Part 2: Guidance on 4 MCID 208 ISO/IEC 20000-2:2019 ISO/IEC JTC 1/SC 40 the application of service management systems

Information technology -- Service management -- Part 3: Guidance on 5 MCID 208 ISO/IEC 20000-3:2019 ISO/IEC JTC 1/SC 40 scope definition and applicability of ISO/IEC 20000-1 Information technology -- Service management -- Part 6: Require- 6 MCID 208 ISO/IEC 20000-6:2017 ments for bodies providing audit and certification of service manage- ISO/IEC JTC 1/SC 40 ment systems Information and documentation -- International standard identifier 7 MCID 229 ISO 15511:2019 ISO/TC 46/SC 4 for libraries and related organizations (ISIL)

Sampling procedures for inspection by attributes -- Part 4: Procedures 8 MEAT 56 ISO 2859-4:2020 ISO/TC 69/SC 5 for assessment of declared quality levels Sampling procedures for inspection by attributes -- Part 5: System of 9 MEAT 56 ISO 2859-5:2005 sequential sampling plans indexed by acceptance quality limit (AQL) ISO/TC 69/SC 5 for lot-by-lot inspection Accuracy (trueness and precision) of measurement methods and 10 MEAT 56 ISO 5725-2:2019 results -- Part 2: Basic method for the determination of repeatability ISO/TC 69/SC 6 and reproducibility of a standard measurement method

11 MEAT 56 ISO 10005:2018 Quality management -- Guidelines for quality plans ISO/TC 176/SC 2

Quality management systems -- Guidelines for the application of ISO 12 MEAT 56 ISO 18091:2019 ISO/TC 176 9001 in local government

13 MEAT 56 ISO 37500:2014 Guidance on outsourcing ISO/TC 286

14 MEAT 76 ISO 16232:2018 Road vehicles -- Cleanliness of components and systems ISO/TC 22/SC 34

Road vehicles -- Controller area network (CAN) -- Part 1: Data link 15 MEAT 78 ISO 11898-1:2015 ISO/TC 22/SC 31 layer and physical signalling

Road vehicles -- Controller area network (CAN) -- Part 2: High-speed 16 MEAT 78 ISO 11898-2:2016 ISO/TC 22/SC 31 medium access unit

Road vehicles -- Diagnostic communication over Internet Protocol 17 MEAT 78 ISO 13400-4:2016 ISO/TC 22/SC 31 (DoIP) -- Part 4: Ethernet-based high-speed data link connector

Road vehicles -- Unified diagnostic services (UDS) -- Part 4: Unified 18 MEAT 78 ISO 14229-4:2012 ISO/TC 22/SC 31 diagnostic services on FlexRay implementation (UDSonFR)

Road vehicles -- Diagnostic communication over Controller Area Net- 19 MEAT 78 ISO 15765-4:2016 ISO/TC 22/SC 31 work (DoCAN) -- Part 4: Requirements for emissions-related systems

102 Textiles -- Woven fabrics -- Construction -- Methods of analysis -- Part 20 MEAT 103 ISO 7211-3:1984 ISO/TC 38/SC 24 3: Determination of crimp of yarn in fabric

Textiles -- Methods for analysis of woven fabrics construction -- Part 5: 21 MEAT 103 ISO 7211-5:2020 ISO/TC 38/SC 24 Determination of linear density of yarn removed from fabric

22 MEAT 108 ISO 8296:2003 Plastics -- Film and sheeting -- Determination of wetting tension ISO/TC 61/SC 11

23 MEAT 108 ISO 20457:2018 Plastics moulded parts -- Tolerances and acceptance conditions ISO/TC 61

Road vehicles -- Electrical disturbances from conduction and coupling 24 MEAT 333 ISO 7637-2:2011 ISO/TC 22/SC 32 -- Part 2: Electrical transient conduction along supply lines only Road vehicles -- Electrical disturbances from conduction and coupling 25 MEAT 333 ISO 7637-3:2016 -- Part 3: Electrical transient transmission by capacitive and inductive ISO/TC 22/SC 32 coupling via lines other than supply lines Road vehicles -- Test methods for electrical disturbances from electro- 26 MEAT 333 ISO 10605:2008 ISO/TC 22/SC 32 static discharge

27 MEAT 333 ISO 10605:2008/Amd 1:2014 ISO/TC 22/SC 32

28 MEAT 333 ISO 10605:2008/Cor 1:2010 ISO/TC 22/SC 32

Road vehicles -- Component test methods for electrical disturbances 29 MEAT 333 ISO 11452-1:2015 from narrowband radiated electromagnetic energy -- Part 1: General ISO/TC 22/SC 32 principles and terminology Road vehicles -- Component test methods for electrical disturbances 30 MEAT 333 ISO 11452-10:2009 from narrowband radiated electromagnetic energy -- Part 10: Immuni- ISO/TC 22/SC 32 ty to conducted disturbances in the extended audio frequency range Road vehicles -- Component test methods for electrical disturbances 31 MEAT 333 ISO 11452-7:2003 from narrowband radiated electromagnetic energy -- Part 7: Direct ISO/TC 22/SC 32 radio frequency (RF) power injection Road vehicles -- Component test methods for electrical disturbances 32 MEAT 333 ISO 11452-8:2015 from narrowband radiated electromagnetic energy -- Part 8: Immunity ISO/TC 22/SC 32 to magnetic fields Road vehicles -- Environmental conditions and testing for electrical 33 MEAT 333 ISO 16750-1:2018 ISO/TC 22/SC 32 and electronic equipment -- Part 1: General

Road vehicles -- Environmental conditions and testing for electrical 34 MEAT 333 ISO 16750-3:2012 ISO/TC 22/SC 32 and electronic equipment -- Part 3: Mechanical loads

Road vehicles -- Degrees of protection (IP code) -- Protection of elec- 35 MEAT 333 ISO 20653:2013 ISO/TC 22/SC 32 trical equipment against foreign objects, water and access

36 MEAT 357 ISO 19230:2020 Gas analysis -- Sampling guidelines ISO/TC 158

Natural gas -- Upstream area -- Determination of composition by 37 MEAT 357 ISO 23978:2020 ISO/TC 193/SC 3 Laser Raman spectroscopy

103 LEGENDA

Minister Denumire

MADR Ministerul Agriculturii şi Dezvoltării Rurale MAI Ministerul Afacerilor Interne MC Ministerul Culturii MDLPA Ministrul Dezvoltării, Lucrărilor Publice şi Administraţiei MEEMA Ministerul Economiei Economiei, Antreprenoriatului și Turismului MEnerigie Ministerul Energiei MMPS Ministerul Muncii şi Protecţiei Sociale MMAP Ministrul Mediului Apelor și Pădurilor MS Ministerul Sanătăţii MCID Ministerul Cercetării, Inovării și Digitalizării MTI Ministerul Transporturilor si Infrastructurii ANRE Autoritatea Naţională de Reglementare în domeniul Energiei

Directiva Descriere

Regulamentul (UE) nr. 1015/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamen- 1015/2010 tului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat rufe de uz casnic Regulamentul (UE) nr. 1016/2010 al Comisiei din 10 noiembrie 2010 de implementare a Directivei 2009/125/CE a Parlamen- 1016/2010 tului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile mașinilor de spălat vase de uz casnic Completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului cu privire la cerințele de etichetare energetică 1060/2010 a aparatelor frigorifice de uz casnic Regulamentul (CE) nr. 107/2009 al Comisiei din 4 februarie 2009 de implementare a Directivei 2005/32/CE a Parlamentului 107/2009 European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru unitățile simple de conversie semnal Regulamentul (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parla- 1194/2012 mentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminiscente și echipamentele aferente Regulamentul (CE) nr. 1275/2008 al Comisiei din 17 decembrie 2008 de implementare a Directivei 2005/32/CE a Parlamen- 1275/2008 tului European și a Consiliului în ceea ce privește cerințele în materie de ecoproiectare pentru consumul de energie electrică în modul standby și oprit al echipamentelor electrice și electronice de uz casnic și de birou Regulamentul (CE) nr. 1907/2006 al Parlamentului European și al Consiliului privind înregistrarea, evaluarea, autorizarea și 1907/2006 restricționarea substanțelor chimice (REACH) 2014/53/EU 1999/5/EC Directiva 1999/5/EC privind echipamentele radio și echipamentele terminale de telecomunicații Directivei 2001/16/CE a Parlamentului European și a Consiliului din 19 martie 2001 privind interoperabilitatea sistemului de 2001/16/EC transport feroviar convențional transeuropean 2001/95/EC Securitatea generală a produselor (GPS) 2003/2003 Regulamentul (CE) 2003/2003 al Parlamentului European și al Consiliului din 13 octombrie 2003 privind îngrășămintele Directiva 2003/44/CE a Parlamentului European și a Consiliului din 16 iunie 2003 de modificare a Directivei 94/25/CE privind 2003/44/EC apropierea actelor cu putere de lege și a actelor administrative ale statelor membre referitoare la ambarcațiunile de agre- ment Commission Regulation (EU) No 223/2012 of 14 March 2012 amending Regulation (EC) No 2003/2003 of the European Par- 223/2012 liament and of the Council relating to fertilisers for the purposes of adapting Annexes I and IV thereto to technical progress Text with EEA relevance Directiva 2002/40/CE a Comisiei din 8 mai 2002 de aplicare a Directivei 92/75/CEE a Consiliului cu privire la etichetarea 2002/40/EC energetică a cuptoarelor electrice de uz casnic 2004/22/EC Directiva privind mijloacele de măsurare Directiva 2006/42/CE a Parlamentului European și a Consiliului din 17 mai 2006 privind echipamentele tehnice și de modifi- 2006/42/EC care a Directivei 95/16/CE (reformare) 2007/23/EC Pyrotechnic articles directive Directiva 2007/47/CE a Parlamentului European și a Consiliului din 5 septembrie 2007 de modificare a Directivei 90/385/ CEE a Consiliului privind apropierea legislațiilor statelor membre referitoare la dispozitivele medicale active implantabile, 2007/47/EC a Directivei 93/42/CEE a Consiliului privind dispozitivele medicale și a Directivei 98/8/CE privind comercializarea produselor biodestructive (AIMD amendament)

104 Directiva 2008/57/CE a Parlamentului European și a Consiliului din 17 iunie 2008 privind interoperabilitatea sistemului 2008/57/EC feroviar în Comunitate (reformare) Directiva 2009/105/CE a Parlamentului European și a Consiliului din 16 septembrie 2009 referitoare la recipientele simple 2009/105/EC 2014/29/EU sub presiune Directiva 2009/125/CE a Parlamentului European și a Consiliului din 21 octombrie 2009 de instituire a unui cadru pentru 2009/125/EC stabilirea cerințelor în materie de proiectare ecologică aplicabile produselor cu impact energetic Directiva 2009/142/CE a Parlamentului European și a Consiliului din 30 noiembrie 2009 privind aparatele consumatoare de 2009/142/EC combustibili gazoși 2009/48/EC Directiva 2009/48/CE a Parlamentului European și a Consiliului din 18 iunie 2009 privind siguranța jucăriilor 2009/128/EC Pesticide Indicarea, prin etichetare și informații standard despre produs, a consumului de energie și de alte resurse al produselor cu 2010/30/EU impact energetic 2011/65/EU Restricţionarea utilizării anumitor substanţe periculoase în echipamentul electric şi electronic 2013/53/EU 94/25/EC Directiva referitoare la ambarcațiunile de agrement (RCD) 2014/30/EU 2004/108/EC Compatibilitatea electromagnetică (EMC) Directiva 2014/31/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislației statelor 2014/31/EU membre referitoare la punerea la dispoziție pe piață a aparatelor de cântărit cu funcționare neautomată Directiva 2014/32/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislației statelor 2014/32/EU membre referitoare la punerea la dispoziție pe piață a mijloacelor de măsurare 2014/33/EU 95/16/EC Ascensoare Directiva 2014/34/UE a Parlamentului European și a Consiliului din 26 februarie 2014 privind armonizarea legislațiilor 2014/34/EU 94/9/EC statelor membre referitoare la echipamentele și sistemele de protecție destinate utilizării în atmosfere potențial explozive (reformare) (ATEX) Directiva 2006/95/CE a Parlamentului European și a Consiliului din 12 decembrie 2006 privind armonizarea legislațiilor 2014/35/EU 2006/95/EC statelor membre referitoare la echipamentele electrice destinate utilizării în cadrul unor anumite limite de tensiune (versi- une codificată) (LVD) Directiva 2014/55/EU a Parlamentului European și a Consiliului din 16 aprilie 2014 privind facturarea electronică în domeniul 2014/55/EU achizițiilor publice Directiva 2014/68/UE a Parlamentului European și a Consiliului din 15 mai 2014 privind armonizarea legislației statelor 2014/68/EU (97/23/EC) membre referitoare la punerea la dispoziție pe piață a echipamentelor sub presiune Directiva 2014/94/EU a Parlamentului European și a Consiliului din 22 octombrie 2014 privind instalarea infrastructurii 2014/94/EU pentru combustibili alternativi Regulamentul (UE) 2015/1095 al Comisiei din 5 mai 2015 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică aplicabile dulapurilor frigorifice de 2015/1095 depozitare profesionale, dulapurilor frigorifice de răcire și congelare rapidă, unităților de condensare și răcitoarelor pentru procese Regulamentul (UE) 2015/1188 al comisiei din 28 aprilie 2015 de punere în aplicare a Directivei 2009/125/CE a Parlamen- 2015/1188 tului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică aplicabile aparatelor pentru încălzire locală 2000/9/EC Directiva 2000/9/CE a parlamentului european si a consiliului privind instalațiile pe cablu care transportă persoane Regulamentul (UE) 2016/424 al Parlamentului European și al Consiliului din 9 martie 2016 privind instalațiile pe cablu și de 2016/424 abrogare a Directivei 2000/9/CE Regulamentului (UE) 2016/2281 al Comisiei de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a 2016/2281 Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile produselor pentru încălzirea aerului, produselor pentru răcire, răcitoarelor industriale cu temperaturi înalte și ventiloconvectoarelor Regulamentul (UE) nr. 206/2012 al Comisiei din 6 martie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentu- 206/2012 lui European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aparatele de climatizare și ventilatoarele de confort Regulamentului (CE) nr. 244/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpi de uz casnic nondirecționale, modificat prin Regulamentul (CE) nr. 859/2009 al Comisiei din 18 septembrie 2009 în ceea ce privește cerințele de proiec- tare ecologică referitoare la radiația ultravioletă a lămpilor de uz casnic nondirecționale și a Regulamentului delegat (UE) 244/2009 nr. 874/2012 al Comisiei din 12 iulie 2012 de completare a Directivei 2010/30/UE a Parlamentului European și a Consiliului în ceea ce privește etichetarea energetică a lămpilor electrice și a corpurilor de iluminat, precum și a Regulamentului (UE) nr. 1194/2012 al Comisiei din 12 decembrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru lămpile direcționale, lămpile cu diode electroluminis- cente și echipamentele aferente Regulamentul (CE) nr. 245/2009 al Comisiei din 18 martie 2009 de implementare a Directivei 2005/32/CE a Parlamentului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile lămpilor fluorescente fără balast 245/2009 încorporat, lămpilor cu descărcare de intensitate ridicată, precum și balasturilor și corpurilor de iluminat compatibile cu aceste lămpi, și de abrogare a Directivei 2000/55/CE a Parlamentului European și a Consiliului Regulamentul (CE) nr. 278/2009 al Comisiei din 6 aprilie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamen- 278/2009 tului European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru puterea absorbită în regim fără sarcină și pentru randamentul mediu în regim activ al surselor externe de alimentare Regulamentul (UE) nr. 305/2011 al Parlamentului European şi al Consiliului din 9 martie 2011 de stabilire a unor condiţii 305/2011 armonizate pentru comercializarea produselor pentru construcţii şi de abrogare a Directivei 89/106/CEE a Consiliului (CPR) Regulamentul (UE) nr . 392/2012 al Comisiei din 1 martie 2012 de completare a Directivei 2010/30/UE a Parlamentului Euro- 392/2012 pean și a Consiliului cu privire la cerințele de etichetare energetică a uscătoarelor de rufe de uz casnic cu tambur

105 Regulamentul (UE) nr. 547/2012 al Comisiei din 25 iunie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamentului 547/2012 European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru pompele de apă Regulamentul (UE) nr. 548/2014 al Comisiei din 21 mai 2014 privind punerea în aplicare a Directivei 2009/125/CE a Parla- 548/2014 mentului European și a Consiliului în ceea ce privește transformatoarele de putere mici, medii și mari 552/2004 Iinteroperabilitatea rețelei europene de gestionare a traficului aerian Regulamentul delegat (UE) nr. 65/2014 al Comisiei din 1 octombrie 2013 de completare a Directivei 2010/30/UE a Parlamen- 65/2014 tului European și a Consiliului în ceea ce privește etichetarea energetică a cuptoarelor și a hotelor de bucătărie de uz casnic Regulamentul (UE) nr. 66/2014 al Comisiei din 14 ianuarie 2014 de punere în aplicare a Directivei 2009/125/CE a Parlamen- 66/2014 tului European și a Consiliului în ceea ce privește cerințele de proiectare ecologică aplicabile cuptoarelor, plitelor de gătit și hotelor de bucătărie de uz casnic Regulamentului (UE) nr. 617/2013 al Comisiei de implementare a Directivei 2009/125/CE a Parlamentului European și a Con- 617/2013 siliului în ceea ce privește cerințele de proiectare ecologică aplicabile computerelor și serverelor informatice Regulamentul (CE) nr. 640/2009 al Comisiei din 22 iulie 2009 de implementare a Directivei 2005/32/CE a Parlamentului 640/2009 European și a Consiliului în ceea ce privește cerințele de proiectare ecologică pentru motoarele electrice Regulamentul (CE) nr. 641/2009 al Comisiei din 22 iulie 2009 de punere în aplicare a Directivei 2005/32/CE a Parlamentului 641/2009 European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile pompelor de circulație fără etanșare inde- pendente și pompelor de circulație fără etanșare integrate în produse 643/2009 Cerințele de proiectare ecologică pentru aparatele frigorifice de uz casnic Regulamentul delegat (UE) nr. 665/2013 al Comisiei din 3 mai 2013 de completare a Directivei 2010/30/UE a Parlamentului 665/2013 European şi a Consiliului în ceea ce priveţte etichetarea energetică a aspiratoarelor Regulamentul (UE) nr. 666/2013 al Comisiei din 8 iulie 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului 666/2013 European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru aspiratoare Regulament (EC) Nr 765/2008 al Parlamentului European și a Consiliului din 9 Julie 2008 de stabilire a cerinţelor pentru 765/2008 acreditare şi supravegherea pieţei referitor la marketing-ul produselor şi abrogând Regulamentul (EEC) Nr 339/93 89/686/EEC Echipament individual de protecție (PPE) Regulamentul delegat (UE) nr. 811/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parla- mentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea incintelor, a 811/2013 instalațiilor de încălzire cu funcție dublă, a pachetelor de instalație pentru încălzirea incintelor, regulator de temperatură și dispozitiv solar și a pachetelor de instalație de încălzire cu funcție dublă, regulator de temperatură și dispozitiv solar Regulamentul delegat (UE) nr. 812/2013 al Comisiei din 18 februarie 2013 de completare a Directivei 2010/30/UE a Parla- 812/2013 mentului European și a Consiliului în ceea ce privește etichetarea energetică a instalațiilor pentru încălzirea apei, a rezer- voarelor pentru apă caldă și a pachetelor de instalație pentru încălzirea apei și dispozitiv solar Regulamentul (UE) nr. 813/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului 813/2013 European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea incintelor și instalațiile de încălzire cu funcție dublă Regulamentul (UE) nr. 814/2013 al Comisiei din 2 august 2013 de punere în aplicare a Directivei 2009/125/CE a Parlamentului 814/2013 European și a Consiliului în ceea ce privește cerințele în materie de proiectare ecologică pentru instalațiile pentru încălzirea apei și rezervoarele de apă caldă 90/385/EEC Directiva referitoare la Dispozitivele Medicale Active Implantabile (AIMD) Directiva 92/42/CEE a Consiliului din 21 mai 1992 privind cerințele de randament pentru cazanele noi de apă caldă cu com- 92/42/EEC bustie lichidă sau gazoasă Directiva 92/75/CEE a Consiliului din 22 septembrie 1992 privind indicarea, prin etichetare și informații standard despre 92/75/EEC produs, a consumului de energie și de alte resurse la aparatele de uz casnic 93/42/EEC Directiva 93/42/CEE a Consiliului din 14 iunie 1993 privind dispozitivele medicale 93/95/EEC Echipament individual de protecție. Amendament 89/686/EEC Directiva 96/60/CE a Comisiei din 19 septembrie 1996 de punere în aplicare a Directivei 92/75/CEE a Consiliului cu privire la 96/60/EC etichetarea energetică a mașinilor combinate de spălat și uscat rufe de uz casnic 97/67/EC Servicii postale Directiva 98/79/CE a Parlamentului European și a Consiliului din 27 octombrie 1998 privind dispozitivele medicale pentru 98/79/EC diagnostic in vitro Regulamentul (UE) nr. 932/2012 al Comisiei din 3 octombrie 2012 de punere în aplicare a Directivei 2009/125/CE a Parlamen- 932/2012 tului European și a Consiliului cu privire la cerințele de proiectare ecologică aplicabile uscătoarelor de rufe de uz casnic cu tambur

106 ASOCIAȚIA DE STANDARDIZARE DIN ROMÂNIA Bucureşti, Sector 1, Str. Mihai Eminescu, 238, sector 2, 020085 asro.ro | magazin.asro.ro | standardizarea.ro