DOCSLIB.ORG

Lista Mensal De Fevereiro 2013

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lista Mensal De Fevereiro 2013 Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização lista mensal °°° fevereiro 2013 A presente -publicação tem por objetivo: - A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis. - A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas. - A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais. - A divulgação da edição e anulação de outros documentos normativos. ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3 1.2 Normas Portuguesas anuladas …………………………………………………………………………… 6 1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 7 1.4 Normas Europeias adotadas ……………………………………………………………………………… 8 2. Normas Europeias Publicadas 2.1 CEN …………………………………………………………………………………………………………….. 14 2.2 CENELEC ………………………………………………………………………………………………………. 20 2.3 CEN/CENELEC ……………………………………………………………………………………………….. 22 2.4 ETSI ……………………………………………………………………………………………………………… 23 3. Normas Internacionais publicadas IEC …………………………………………………………………………………………………………………… 24 ISO …………………………………………………………………………………………………………………... 26 4. Projetos de normas portuguesas 4.1 Projetos em inquérito público …………………………………………………………………………….. 28 4.2 Projetos anulados ………………………………………………………………………………………….… 29 5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) 5.1 Projetos em inquérito público …………………………………………………………………………..… 30 5.2 Questionários preliminares ……………………………………………………………………………….… 53 5.3 Comités Técnicos do CEN …………………………………………………………………………………. 54 Rua António Gião, 2 2829-513 CAPARICA Mod-DNOR-01-08_01 Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização ÍNDICE (cont.) 6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Electrotécnica (CENELEC) 6.1 Projetos em inquérito público …………………………………………………………………………… 58 6.2 Propostas de anulação de Normas ………………………………………………………….………... 67 6.3 Proposta de estudo de novas normas - "Vilamoura Procedures" …………….……………….…. 68 6.4 Questionários preliminares …………………………………………………………….……………….… 69 7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC) 7.1 Projetos em inquérito público …………………………………………………………………………… 70 8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 8.1 Projetos em inquérito público …………………………………………………………………………… 71 8.2 Propostas de anulação de Normas ……………………………………………………………………. 80 9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO) 9.1 Projetos em inquérito público …………………………………………………………………………… 81 9.2 Comités Técnicos da ISO ……………………………………………………………………….………... 95 10. Projetos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC) 10.1 Projetos em inquérito público ………………………………………………………………………….. 98 11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC) 11.1 Projetos em inquérito público …………………………………………………………………….……. 105 12. Edição e anulação de outros documentos Normativos …………………………………………………………………………………………….… 106 Rua António Gião, 2 2829-513 CAPARICA Mod-DNOR-01-08_01 Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt normativosDOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas Para cada reFerência, menciona-se a designação codiFicada (preFixos NP, NP EN, NP EN ISO, NP ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Homologação e a respectiva data. As Normas Portuguesas reFerenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal. C120 / CT 12 Termo de Homologação nº 2013/0004, 2013-01-08 NP EN 10088-4:2013 ( 1ª Edição ) Preço: 42,50 EUR Aços inoxidáveis Parte 4: Condições técnicas de fornecimento de C350 / CT 35 chapas e bandas em aço resistente à corrosão para fins de construção NP 4497:2013 ( 1ª Edição ) Preço: 7,00 EUR EN 10088-4:2009 IDT Carnes e produtos cárneos Salsicha tipo alemã Definição e Termo de Homologação nº 2013/0013, 2013-01-08 caraterísticas Termo de Homologação nº 2013/0005, 2013-01-08 C270 / CT 27 NP EN 1492-1:2000+A1:2013 ( 1ª Edição ) Preço: 35,00 EUR C350 / CT 35 Estropos têxteis Segurança Parte 1: Estropos de cinta tecidos em NP 4499:2013 ( 1ª Edição ) Preço: 10,50 EUR fibras artificiais para uso geral Carnes e produtos cárneos Determinação do teor em açúcares totais, EN 1492-1:2000+A1:2008 IDT redutores e lactose Método Luff-Schoorl (método de referência) Termo de Homologação nº 2013/0006, 2013-01-08 Termo de Homologação nº 2013/0012, 2013-01-08 C270 / CT 27 C800 / CT 80 NP EN 1492-2:2000+A1:2013 ( 1ª Edição ) Preço: 28,00 EUR NP ISO 31000:2012 ( 1ª Edição ) Preço: 28,00 EUR Estropos têxteis Segurança Parte 2: Estropos redondos de tecidos Gestão do risco Princípios e linhas de orientação fibras artificiais para uso geral ISO 31000:2009 IDT EN 1492-2:2000+A1:2008 IDT Termo de Homologação nº 2012/0200, 2012-07-26 Termo de Homologação nº 2013/0007, 2013-01-08 C1210 / CT 121 C270 / CT 27 NP EN 15435:2012 ( 1ª Edição ) Preço: 37,50 EUR NP EN 1677-3:2001+A1:2013 ( 1ª Edição ) Preço: 17,50 EUR Produtos pré-fabricados de betão Blocos de cofragem de betão de Componentes para estropos Segurança Parte 3: Gatos autocolantes agregados correntes e leves Propriedades do produto e desempenho em aço forjado, Grau 8 EN 15435:2008 IDT EN 1677-3:2001+A1:2008 IDT Termo de Homologação nº 2012/0182, 2012-07-06 Termo de Homologação nº 2013/0009, 2013-01-08 C1210 / CT 121 C270 / CT 27 NP EN 15498:2012 ( 1ª Edição ) Preço: 45,00 EUR NP EN 12385-3:2004+A1:2013 ( 1ª Edição ) Preço: 24,50 EUR Produtos pré-fabricados em betão Blocos de cofragem de betão com Cabos de aço Segurança Parte 3: Informação para usao e aparas de madeira Propriedades do produto e desempenho manutenção EN 15498:2008 IDT EN 12385-3:2004+A1:2008 IDT Termo de Homologação nº 2012/0228, 2012-08-14 Termo de Homologação nº 2013/0014, 2013-01-09 C1211 / CT 121 C270 / CT 27 NP EN 15258:2012 ( 1ª Edição ) Preço: 31,50 EUR NP EN 12385-10:2003+A1:2013 ( 1ª Edição ) Preço: 28,00 EUR Produtos pré-fabricados em betão Elementos de muro de contenção Cabos de aço Segurança Parte 10 : Cabos "espiraloidais" para EN 15258:2008 IDT aplicações gerais em estruturas Termo de Homologação nº 2012/0216, 2012-08-09 EN 12385-10:2003+A1:2008 IDT Termo de Homologação nº 2013/0008, 2013-01-08 C1430 / CT 143 NP EN ISO 3381:2013 ( 2ª Edição ) Preço: 28,00 EUR C270 / CT 27 Aplicações ferroviárias Acústica Medição do ruído no interior de NP EN 13889-:2003+A1:2013 ( 1ª Edição ) Preço: 31,50 EUR veículos que circulam sobre carris Manilhas de aço forjado para aplicações gerais de elevação Manilhas (ISO 3381:2005) direitas e manilhas lira Grau 6, Segurança EN ISO 3381:2011 IDT EN 13889-:2003+A1:2008 IDT Termo de Homologação nº 2013/0001, 2013-01-08 Termo de Homologação nº 2013/0021, 2013-01-14 C1460 / CT 146 C350 / CT 35 NP ISO 8714:2012 ( 1ª Edição ) Preço: 28,00 EUR NP 591:2013 ( 2ª Edição ) Preço: 7,00 EUR Veículos elétricos rodoviários Consumo de energia de referência e Salpicão Definição, classificação, características e autonomia de referência Procedimentos de ensaio para veículos acondicionamento ligeiros de passageiros e comerciais Lista mensal ▪ documentos normativos Mod-DNOR-01-08_00 3 15 fevereiro 2013 normativosDOCUMENTOS Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização ISO 8714:2002 IDT Termo de Homologação nº 2012/0351, 2012-12-13 E2300 / CT 23 NP EN 61995-1:2013 ( 1ª Edição ) Preço: 52,50 EUR C1530 / CT 153 Dispositivos de conexão para luminárias para usos domésticos e NP EN 13808:2012 ( 1ª Edição ) Preço: 24,50 EUR análogos Parte 1: Requisitos gerais Betumes e ligantes betuminosos Quadro de especificações para (IEC 61995-1:2005, modificada) emulsões betuminosas catiónicas EN 61995-1:2008 IDT EN 13808:2005 IDT Termo de Homologação nº 2013/0023, 2013-01-16 Termo de Homologação nº 2012/0134, 2012-05-10 E2300 / CT 23 C1550 / CT 155 NP EN 61995-2:2013 ( 1ª Edição ) Preço: 14,00 EUR NP EN 40-2:2012 ( 1ª Edição ) Preço: 21,00 EUR Dispositivos de conexão para luminárias para usos domésticos e Colunas de iluminação Parte 2: Requisitos gerais e dimensões análogos Parte 2: Folhas de normalização para DCL EN 40-2:2004 IDT (IEC 61995-2:2009) Termo de Homologação nº 2012/0210, 2012-08-09 EN 61995-2:2009 IDT Termo de Homologação nº 2013/0024, 2013-01-16 C1550 / CT 155 NP EN 12368:2012 ( 1ª Edição ) Preço: 37,50 EUR E6100 / CT 61 Equipamento de controlo de tráfego Semáforos NP EN 61558-2-8:2012 ( 2ª Edição ) Preço: 17,50 EUR EN 12368:2006 IDT Segurança de transformadores, bobinas de indutância, blocos de Termo de Homologação nº 2012/0214,
Load more

Recommended publications
  • List of Published Standards
    Report Date : 2021-09-17 Cost Centre(s) : % LIST OF PUBLISHED STANDARDS Page No : 1 Of 3 Total Count: 41 Committee SANS Date Latest Reaffirmation Review/ Number Number Int Ed Ed Sansified Title Approved Amendment due Revision SABS/TC 165 SANS 60654-1:2017/IEC 60654-1:1993 2 1 Y Industrial-process measurement and control 2017-06-23 2022-06-23 equipment - operating conditions - Part 1: Climatic conditions SANS 61131-1:2017/IEC 61131-1:2003 2 Y Programmable controllers Part 1: General 2017-10-13 2022-10-13 information SANS 61131-2:2018/IEC 61131-2:2007 2 Y Programmable controllers Part 2: Equipment 2018-12-07 2023-12-07 requirements and tests SANS 61131-3:2018/IEC 61131-3:2013 2 Y Programmable controllers Part 3: 2018-07-20 2023-07-20 Programming languages SATR 61131-4:2017/IEC TR 61131-4:2004 1 Y Programmable controllers Part 4: User 2017-12-15 2022-12-15 guidelines SANS 61131-5:2018/IEC 61131-5:2000 1 Y Programmable controllers - Part 5: 2018-02-23 2023-02-23 Communications SANS 61131-6:2018/IEC 61131-6:2012 1 Y Programmable controllers - Part 6: Functional 2018-05-25 2023-05-25 safety SANS 61131-7:2018/IEC 61131-7:2000 1 Y Programmable controllers - Part 7:Fuzzy 2018-02-23 2023-02-23 control programming SATR 61131-8:2019/IEC TR 61131-8:2003 1 Y Programmable controllers - Part 8: Guidelines 2019-11-22 2024-11-22 for the application and implementation of programming languages SANS 61131-9:2020/IEC 61131-9:2013 1 Y Programmable controllers - Part 9: Single- 2020-05-29 2025-05-29 drop digital communication interface for small sensors and actuators (SDCI) SANS 61158-3-2:2021/IEC 61158-3-2:2019 2.1 1 Y Industrial communication networks - Fieldbus 2021-07-16 1 I A 2021-07-16 2026-07-16 specifications - Part 3-2: Data-link layer service definition - Type 2 elements.
    [Show full text]
  • Supervised Dive
    EFFECTIVE 1 March 2009 MINIMUM COURSE CONTENT FOR Supervised Diver Certifi cation As Approved By ©2009, Recreational Scuba Training Council, Inc. (RSTC) Recreational Scuba Training Council, Inc. RSTC Coordinator P.O. Box 11083 Jacksonville, FL 32239 USA Recreational Scuba Training Council (RSTC) Minimum Course Content for Supervised Diver Certifi cation 1. Scope and Purpose This standard provides minimum course content requirements for instruction leading to super- vised diver certifi cation in recreational diving with scuba (self-contained underwater breathing appa- ratus). The intent of the standard is to prepare a non diver to the point that he can enjoy scuba diving in open water under controlled conditions—that is, under the supervision of a diving professional (instructor or certifi ed assistant – see defi nitions) and to a limited depth. These requirements do not defi ne full, autonomous certifi cation and should not be confused with Open Water Scuba Certifi cation. (See Recreational Scuba Training Council Minimum Course Content for Open Water Scuba Certifi ca- tion.) The Supervised Diver Certifi cation Standards are a subset of the Open Water Scuba Certifi cation standards. Moreover, as part of the supervised diver course content, supervised divers are informed of the limitations of the certifi cation and urged to continue their training to obtain open water diver certifi - cation. Within the scope of supervised diver training, the requirements of this standard are meant to be com- prehensive, but general in nature. That is, the standard presents all the subject areas essential for su- pervised diver certifi cation, but it does not give a detailed listing of the skills and information encom- passed by each area.
    [Show full text]
  • 2020 Instructor Manual
    INSTRUCTOR MANUAL Product No. 79173 (Rev. 12/19) Version 2020 © PADI 2020 PADI INSTRUCTOR MANUAL PADI® Instructor Manual © PADI 2020 No part of this product may be reproduced, sold or distributed in any form without the written permission of the publisher. ® indicates a trademark is registered in the U.S. and certain other countries. Published by PADI 30151 Tomas Rancho Santa Margarita, CA 92688-2125 USA Printed in USA Product No. 79173 (Rev. 12/19) Version 2020 Scuba diving can never be entirely risk-free. However, by adhering to the standards within this manual whenever training or supervising divers who participate in PADI courses and programs, PADI Members can provide a strong platform from which divers and novices can learn to manage those risks and have fun in the process. How to Use This Manual This manual provides PADI course requirements. Text appearing in boldface print denotes required standards that may not be deviated from while teaching the course. PADI Standards do not, however, supersede local laws or regulations. Keep informed of these wherever you teach. Though all PADI Members use this manual, it is written from the instructor’s perspective, except for course performance requirements. These are written from the student diver’s or program participant’s perspective, stating specifcally what must be demonstrated or performed. As a starting point, become familiar with the items in the Commitment to Excellence section. This includes the PADI Professional’s Creed, PADI Member Code of Practice and Youth Leader’s Commitment. This section outlines your professional commitment to diver safety, responsibility and risk management.
    [Show full text]
  • SDI Diver Standards
    part2 SDI Diversdi Standards diver standards SDI Standards and Procedures Part 2: SDI Diver Standards 2 Version 0221 SDI Standards and Procedures Part 2: SDI Diver Standards Contents 1. Course Overview Matrix ..............................11 2. General Course Standards .......................... 13 2.1 Administrative ........................................................................13 2.2 Accidents .................................................................................14 2.3 Definitions ..............................................................................14 2.4 Confined Water Training ......................................................15 2.5 Open Water Training ............................................................15 2.6 Student – Minimum Equipment Requirements ..............16 2.7 Instructor – Minimum Equipment Requirements ..........16 2.8 Temporary Certification Cards ...........................................17 2.9 Upgrading from SDI Junior certification to full SDI certification ...................................................................................17 3. Snorkeling Course ....................................... 18 3.1 Introduction ............................................................................18 3.2 Qualifications of Graduates.................................................18 3.3 Who May Teach ......................................................................18 3.4 Student to Instructor Ratio ..................................................18 3.5 Student
    [Show full text]
  • Dive Courses Price List
    Dive Courses Price List ! ! SDI and SSI Courses Time Price(€) PADI Courses Pool Try Dive 1 hour 35 Pool Try Dive / Bubble Maker Scuba Refresher / Review 0.5 Day 55 Scuba Review Scuba Discovery / Try Scuba 0.5 Day 55 Discover Scuba Supervised Diver / Scuba Diver 2 Days 260 Scuba Diver Open Water Scuba Diver 4 Days 410 Open Water Scuba Diver Advanced Adventures Diver 2-3 Days 295 Advanced Open Water Diver Rescue / Stress & Rescue Diver 3 Days 325 Rescue Diver EFR / React Right 1 Day 120 EFR Rescue / EFR package 4 Days 400 Rescue / EFR package SDI & SSI Manual / elearning €5545 Euros PADI Manual €65 SDI & SSI Certification €4535 Euros PADI Certification €70 Notes: 1. Course Fees include: dive instruction, all equipment, gas fills and dive site transportation 2. PADI eLearning available at additional cost, please visit PADI website 3. Additional Dives to complete course €50/dive ! ! SDI and SSI Specialty Courses Time Price(€) PADI Specialty Courses Sidemount 4 Days 500 Sidemount Computer Nitrox (incl.2 dives) 1 Day 150 Nitrox (incl.2 dives) Deep 2 Days 200 Deep Wreck 3 Days 200 Wreck SDI & SSI Manual / elearning €45 PADI Manual €45 SDI & SSI Certification €35 PADI Certification €70 Notes: 1. Course Fees include: dive instruction, cylinders, weights, gas fills and dive site transportation 2. Equipment rental is at additional cost 3. PADI eLearning available at additional cost, please visit PADI website 4. Other specialties are available on request 5. Additional Dives to complete course - €50/dive ! ! Professional Courses Time Price (€) Professional Courses Divemaster 2 weeks 900 Divemaster Open Water Instructor 8 Days 1,500 n/a Notes: 1.
    [Show full text]
  • General Training Standards, Policies, and Procedures
    General Training Standards, Policies, and Procedures Version 9.2 GUE General Training Standards, Policies, and Procedures © 2021 Global Underwater Explorers This document is the property of Global Underwater Explorers. All rights reserved. Unauthorized use or reproduction in any form is prohibited. The information in this document is distributed on an “As Is” basis without warranty. While every precaution has been taken in its preparation, neither the author(s) nor Global Underwater Explorers have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused, directly or indirectly, by this document’s contents. To report violations, comments, or feedback, contact [email protected]. 2 GUE General Training Standards, Policies, and Procedures Version 9.2 Contents 1. Purpose of GUE .............................................................................................................................................6 1.1 GUE Objectives ............................................................................................................................................. 6 1.1.1 Promote Quality Education .................................................................................................................. 6 1.1.2 Promote Global Conservation Initiatives .......................................................................................... 6 1.1.3 Promote Global Exploration Initiatives ............................................................................................. 6
    [Show full text]
  • Lista Mensal De Outubro 2012
    Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização lista mensal °°° OUTUBRO 2012 A presente -publicação tem por objetivo: - A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis. - A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas. - A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais. - A divulgação da edição e anulação de outros documentos normativos. ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3 1.2 Normas Portuguesas anuladas …………………………………………………………………………… 4 1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 8 1.4 Normas Europeias adotadas ……………………………………………………………………………… 9 2. Normas Europeias Publicadas 2.1 CEN …………………………………………………………………………………………………………….. 18 2.2 CENELEC ………………………………………………………………………………………………………. 21 2.3 CEN/CENELEC ……………………………………………………………………………………………….. 22 2.4 ETSI ……………………………………………………………………………………………………………… 23 3. Normas Internacionais publicadas IEC …………………………………………………………………………………………………………………… 40 ISO …………………………………………………………………………………………………………………..
    [Show full text]
  • Business Plan
    CENELEC/TC 65X/R BUSINESS PLAN CENELEC/TC or SC Secretariat Date TC 65X Germany 2019-03-04 Please ensure this form is annexed to the TC Report to the CENELEC Technical Board if it has been prepared during a meeting, or sent to CCMC promptly after its contents have been agreed by the Committee by correspondence. TC or SC title: Industrial-process measurement, control and automation A Background CLC/TC 65X is the successor of CLC/TC65CX which was founded in 1993. When starting work in 1993 TC 65CX generated a policy statement as basis for its work. The policy statement read: Policy Statement of TC 65CX 1. To take into account and to recognize all work in fieldbus standardization in IEC, to apply the IEC/CENELEC cooperation agreement. 2. To integrate the IEC standard when available (IEC 1158, part 1, 2, ...) according to a time schedule depending on proven technical capabilities. 3. To integrate exisiting standards originated in Europe and fulfilling the scope of IEC SC65C WG6. Focus of the initial work was to establish European Standards for Industrial Fieldbus communication based on R&D work in Europe. First result of TC 65CX activities were EN 50170 and EN 50254. With increasing activities on IEC level (IEC SC 65C) for Industrial Fieldbus communication standardization work was moved to IEC-level. TC 65CX acted as the European mirror committee to IEC SC65C. Following the restructuring of IEC TC65 which included moving several working groups from SC65C to SC65E and TC65, it was necessary to adapt the scope accordingly. Since 2011 the scope of TC 65CX was extended and the name was changed into TC 65X.
    [Show full text]
  • Standards and Procedures
    TM Standards and Procedures Version 3.2a January 2013 UTD International, LLC 11211 Sorrento Valley Road, Suite i San Diego, CA 92121 [email protected] www.unifiedteamdiving.com +1 760-585-9676 © 2013 UTD International, LLC UTD International, LLC • Standards and Procedures v3.1 Table of Contents 1.0 General ....................................................................................................1 1.1 Overview .................................................................................................1 Mission ...............................................................................................1 Ethos ..................................................................................................1 UTD Covenants .................................................................................2 Certification Philosophy .....................................................................2 Teaching Philosophies .......................................................................3 1.2 Core Teaching Principles .........................................................................3 Training Steps ....................................................................................4 1.3 Training Process and Definitions .............................................................5 Definitions Relevant to Standards and Procedures ...........................6 Evaluation ..........................................................................................7 UTD Diver Certification ......................................................................7
    [Show full text]
  • ISA-TR108.1-2015 Intelligent Device Management Part 1
    This is a preview of "ISA TR108.1-2015". Click here to purchase the full version from the ANSI store. TECHNICAL REPORT ISA-TR108.1-2015 Intelligent Device Management Part 1: Concepts and Terminology Approved 16 June 2015 This is a preview of "ISA TR108.1-2015". Click here to purchase the full version from the ANSI store. ISA-TR108.1-2015, Intelligent Device Management Part 1: Concepts and Terminology ISBN: 978-1-941546-52-9 Copyright © 2015 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709 This is a preview of "ISA TR108.1-2015". Click here to purchase the full version from the ANSI store. - 3 - ISA-TR108.1-2015 Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ISA-TR108.1-2015. This document has been prepared as part of the service of ISA toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P.
    [Show full text]
  • 6. Supervised Diver
    SDI Standards and Procedures Part 2: SDI Diver Standards 6. Supervised Diver 6.1 Introduction This course is designed to give students the necessary skills to conduct open water dives in conditions similar to their training under the direct supervision of a qualified and active dive professional. 6.2 Qualifications of Graduates Upon successful completion of this course, graduates may: 1. Participate in dives under the direct supervision of a qualified and active dive professional to depths of 12 metres / 40 feet that do not require decompression, in conditions similar to their training for up to 12 months. Appropriate surface support must be available. 2. Dive in groups of no more than four Supervised Divers per instructor 3. Enroll in the SDI Open Water Scuba Diver course. If the diver enrolls in the Open Water Scuba Diver Course before their certification expires, they may follow the Supervised Diver Upgrade Procedure.* *See Supervised Diver Upgrade procedure #6.12 for certification requirements. 6.3 Who May Teach 1. An active SDI Open Water Scuba Diver Instructor 6.4 Student to Instructor Ratio Academic 1. Unlimited, so long as adequate facility, supplies and time are provided to ensure comprehensive and complete training of subject matter. Confined Water (swimming pool-like conditions) 1. A maximum of 8 students per instructor 2. Instructors have the option of adding 2 more students with the assistance of an active assistant instructor or divemaster 3. The total number of students an instructor may have in the water is 12 with the assistance of 2 active assistant instructors or divemasters Version 0221 29 SDI Standards and Procedures Part 2: SDI Diver Standards Open Water (ocean, lake, quarry, spring, river or estuary) 1.
    [Show full text]
  • 2.1.2 Recreational Supervised Diver
    2.1.2 Recreational Supervised Diver 2.1.2.1 Course Outcomes GUE’s Recreational Supervised Diver course is designed to provide students with sufficient knowledge, skill, and experience to dive in open water environments under the direct supervision of a dive professional. Upon fulfilling all minimum training requirements, the Recreational Supervised Diver will be qualified to: a. Dive with a professional from a recognized training agency in a diver-to-dive professional ratio not exceeding 3:1. b. Dive to a maximum depth of 40 ft/12 m. c. Dive within minimum decompression limits (MDLs), i.e., no required stops. d. Dive with appropriate surface support (e.g., access to EMS, infrastructure allowing for support in case of emergency). e. Dive in conditions equal to or better than those in which they were trained. f. Use nitrox 32 under direct supervision of a dive professional from a recognized training agency who is certified to use nitrox 32. 2.1.2.2 Prerequisites Applicants for a Recreational Supervised Diver course must: a. Submit a completed Course Registration Form, Medical History Form, and Liability Release Form to GUE HQ. b. Be included in an insurance program that specifically covers diving emergencies. c. Be physically and mentally fit. d. Be a nonsmoker. e. Obtain a physician’s prior written authorization for use of prescription drugs, except for birth control, or for any medical condition that may pose a risk while diving. f. Be a minimum of 14 years of age. Documented parental or legal guardian consent must be submitted to GUE HQ when the participant is a minor.
    [Show full text]