DOCSLIB.ORG

Retirement Tool Auction Saturday February 10, 2018 @10Am 21929 221St

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Retirement Tool Auction Saturday February 10, 2018 @10Am 21929 221St RETIREMENT TOOL AUCTION SATURDAY FEBRUARY 10, 2018 @10AM 21929 221ST. ST. SOUTH ~ PACIFIC JUNCTION/GLENWOOD, IA (AL HUGHES AUCTION FACILITY) 1.5 Miles South of Glenwood, IA on 221st St. Located on the East Side TOOL BOXES MAC TOOLS MACSIMIZER M CLASS II SUPER STATION TOOL (RED) SNAP ON HIGH PERFORMANCE TOOL BOX (57 CHEVY AQUA BLUE) TOP BOX SNAP ON TOOL BOX (BLACK) SNAP ON 75TH ANNIVERSARY RED TOOL BOX MISC. TOOLS NOT ON PROXIBID SNAP ON SCREWDRIVER SETS, LOTS OF SPECIAL LIFTING CHAINS & BRACKETS, TOOL CARTS, TOOL STEPS, IN LINE SPARK CHECKER KIT, GRINDING WHEELS, CORDLESS & CORD TREBEL LIGHTS, ASSORTED PRYBARS, LADY FOOT PYR- BAR SET, PULLER SETS, ELECTRICAL TOOLS, WRENCHES, PUNCHES, HAMMERS, HOSE CUTTERS, CABLE CUTTERS, PLIERS, SMALL TOOL BOXES, GASKETS SCRAPERS , NUT DRIVERS, ALLEN WRENCH SETS, T HANDLE, AIR CONDITIONING TOOLS, INTERNATIONAL SPECIAL TOOLS, REAMER SETS, CENTER PIN PUNCHES, WIRE CRIMPER STRIPPERS, ELECTRICAL TESTERS, CABLE CUTTERS, AXLE NUT SOCKETS, THEXTON TERMINAL RELEASE TOOL KIT, ASSORTMENT OF MANUALS, GRIP WRENCHES, MAC TOOLS TERMINAL TOOL KIT TT96030, MAC TOOLS RELAY TEST JUMPER KIT MAKITA 3/8” DRILL BALTIMORE 15” PUNCH BLACK & DECKER JIGSAW SNAP ON TIMING & ADVANCE LIGHT MT241A COLE TOOL MFG. #7 HAND DRILL PRESS LOCK JAW AUTOMATIC ADJUST VISE GRIP SET SNAP ON SOLID CARBIDE BURR SET BLUE POINT SCREW DRIVER/TORX BITS EPPICO HOLE HOG DRILL BITS KD TOOL CAT OIL FILTER WRENCH SNAP ON 12” DRIL BITS 1/8” THRU ½” KD TOOL CUMMINS OIL FILTER WRENCH MATCO TOOLS SILVER EAGLE AIR SCRAPER BLUE POINT AIR VACUUM KIT SPECIALITY TOOLS CENTRAL INJECTOR TIMING GUAGE FOR CUMMINS PULLER TOOLS CENTRAL INJECTOR GUAGE FOR 903 CUMMINS MAC TOOLS BEARING PULLER SET SNAP ON CUMMINS 855 OVERHEAD TOOLS 7/16”, ½” & ¾” SNAP ON PRY BAR SET SNAP ON CUMMINS OVERHEAD SETTINGS ¾” & 9/16” GEAR WRENCH ADJUSTABLE HEAD PRY BAR SNAP ON OVERHEAD SETTING TOOLS N14, 855, AND ISX SNAP ON 12 POINT 1 1/16” THRU 1 ¼” MATCO BLIND HOLE PULLER SET SNAP ON CUMMINS SNAP RAIL PRESSURE GUAGE SOCKETS SNAP ON SHORT 12 POINT 1/4” THRU 1” SNAP ON DOOR PANEL REMOVER SNAP ON OVERHEAD SETTING WRENCHES 7/8” & ¾” SNAP ON SOCKET SET STANDARD ¼” DRIVE 6 POINT SNAP ON 12 POINT FLANK DRIVE 3/8” THRU 1” MAC TOOLS MASTER DISCONNECT SET MAC OVERHEAD SETTING TOOL N14, 855, & ISX DEEPWELLS 3/16TH THRU 9/16TH CRAFTSMAN 12 POINT RATCHET 5/16” THRU ¾” RACTHET MASTER QUICK RELEASE PLIERS FOR PLASTIC CUMMINS ACCESSERY DRIVE PULLY PULLER SNAP ON SOCKET SET 3/8th DRIVE METRIC 12 POINT 8MM GEARWRENCH 12 POINT 1 1/16” THRU 1 ½” AIR LINE CUMMINS ACCESSORY DRIVE PULLY PULLER THRU 19MM BLUE-POINT 12 POINT 9MM THUR 19MM OTC KINGPIN AND ANCHOR PIN PRESS WITH EXTRA NEW UNIVERSAL WET SLEEVE PULLER BOUGHT FROM SNAP ON MIXED SOCKET SET METRIC ¼” DRIVE 6 POINT 4MM THRU S&K 6 POINT 7MM THRU 19MM PRESS SCREW AND HOSE BUT CAN’T FIND LOGO 10MM GEARWRENCH 12 POINT RACHETTING 8MM THRU 19MM CORNWELL HOSE REMOVING PLIERS SNAP ON WRENCHES FOR 2 STROKE DETROITS SNAP ON AND 1 ODD ONE – ¼” DRIVE STANDARD 6 POINT (MISSING 9MM & 11MM) TEC-TRANS TOOL 15PC T-3500 BUSHING DRIVER SET SPECIALTY DETROIT TOOLS 3/16th THRU 9/16th SNAP ON 12 POINT 3/8” TO ¾” VARIOUS SPECIALTY DETROIT 2 STROKE TOOL SNAP ON ¼” 3/8” ½” DRIVE TORX E4-E24 SNAP ON 3/8” DRIVE CROWS FT 3/8” THRU 1” VALVE SEAT INSTALLERS FOR 53,71,92, 149 DETROIT SNAP ON 3/8TH Drive 12 point 1/4“thru 7/8th SNAP ON 12 POINT 7/16” THRU 7/8” AIR CONDITIONING TOOLS VARIOUS SPECIALTY DETROIT 2 STROKE TOOLS SNAP ON 3/8TH DRIVE 6 POINT 10MM THRU 19MM SNAP ON 12 POINT OFFSET ¾” THRU 1 1/4” SNAP ON REMOTE CHARGING MODULE SEAL INSTALERS FOR 2 STROKE DETROIT SNAP ON 3/8TH” DEEPWELLS ¼” THRU 7/8” 6 POINT SNAP ON 6 POINT LINE WRENCHES 9MM THRU 19MM SNAP ON ELECTRONIC CHARGING SCALE VARIOUS SPECIALTY DETROIT 2 STROKE TOOLS SNAP ON 3/8 DRIVE DEEPWELL 9MM THRU 19MM 6 POINT SNAP ON BOX END TORX E5 THUR E20 ROBINARE CFM 12 134A VACUUM PUMP VARIOUS SPECIALTY DETROIT 2 STROKE TOOLS SNAP ON 1/4” DRIVE DEEPWELL 12 POINT 5MM THRU SNAP ON LINE WRENCHES 6 POINT 3/8” THRU 5/8” MAC TOOLS R134A ALUMINUM MANIFOLD GUAGE SET CAT & CUMMINS NOZZLE PULLER 14MM SNAP ON 3/8” DRIVE BRASS WEATHERHEAD FITTING SNAP ON REFRIGERANT LEAK DETECTOR SNAP ON CAT C15 & C16 HEAD BOLT SOCKET ¾” 12 POINT SNAP ON ½” DRIVE 8 POINT 3/8TH TO 1” SOCKETS 3/8” THRU 25/32” SNAP ON 1 1/8” 6 POINT FOR CAT 3406B JAKE BREAKS SNAP ON ½” DRIVE 12 POINT 10MM THRU 24MM CAT SPECIALTY TOOLS SNAP ON ½” DRIVE 12 POINT 3/8” THRU 1 ¼” PRECISION MEASURING TOOLS CAT 3406E INJECTOR HEIGHT SETTING GUAGE FOWLER MAGNETIC BASE DIAL INDICATOR SNAP ON ½” DRIVE 12 POINT 22MM THRU 32MM TORQ WRENCHES MATCO ¾” FUEL LINE SOCKET FOR DETROIT DD15 CENTRAL MAGNETIC BASE DIAL INDICATOR SNAP ON ½” DRIVE 12 POINT 3/8” THRU 1 1/8” SNAP ON ½” DRIVE SWIVAL HEAD 50 TO 250FT POUNDS DETROIT 60 SERIES INJECTOR HEIGHT GUAGES 80.3MM, (2) FOWLER EXTRA VALUE INTERNAL ELECTRONIC SNAP ON ¼” DRIVE 6 POINT SWIVAL 5.5MM THRU 15MM CLICK TYPE TORQ WRENCH 78.8MM, 82.1MM CALIPER GAGE SNAP ON 3/8” DRIVE SWIVAL 6 POINT 10MM THRU 17MM SNAP ON 3/8” DRIVE SWIVEL HEAD 50 TO 250FT POUNDS DETROIT 60 SERIES CAMSHAFT GEAR PULLER CENTRAL TELESCOPING GUAGE SET ½” THRU 2 1/8” SNAP ON 3/8: DRIVE 6 POINT SWIVAL SOCKET CLICK TYPE TORQ WRENCH STRONMBERG CD CARBURETOR SETTING TOOLS CENTRAL TELESCOPING GUAGE SET ½” THRU 2 1/8” SK ½” DRIVE 12 POINT ½” THRU ¾” SNAP ON 3/8” DRIVE 3 TO 150” POUNDS DIAL POUNDS CYLINDER RIDGE REAMERS FOWLER ELECTRONIC CALIPER 0 TO 6” SNAP ON ½ DRIVE 10MM THRU 19MM 6 POINT OLD CRYSLER SPECIALTY TOOLS (PROBABLY 1940’S – 1960’S) FOWLER ANGLE GUAGE SUNEX 1/2“ DRIVE 12 POINT 10MM THRU 24MM OLD CRYSLER SPECIALTY TOOLS & PULLYS CENTRAL STORM DIGITAL MIC 0 TO 1” SNAP ON 3/8TH DRIVE 6 POINT 5/16” THRU 1” ALLEN WRENCHES (PROBABLY 1940’S – 1960’S) SNAP ON ALLAN WRENCHES 2MM THRU 12MM FOWLER DIAL BASE MAGNETIC INDICATOR SUNEX PLUS 1 MAC AND 1 SNAP ON 3/8” DRIVE 6 POINT TIMING LIGHT (WORKS) SNAP ON 3/8” DRIVE ALLEN WRENCHES 4MM THRU 10MM NSK DIGITAL MICROMETER 1” TO 2” 7MM THRU 19MM SUPER XENON TIMING LIGHT (WORKS) SNAP ON 3/8” & ¼” DRIVE ALLEN WRENCHES 1 1/16” THRU CENTRAL DIAL INDICATOR SNAP ON 3/8” DRIVE SWIVAL 6 POINT 10MM THRU 18MM TIMING LIGHT (WORKS) SNAP ON 3/8” DRIVE 6 POINT SWIVAL 7/16” THRU 3/4” 3/8” FOWLER DEPTH MICROMETER 0 TO 6” SNAP ON ½” DRIVE 6 POINT 3/8” THRU 1 3/16” SNAPO ON 3/8” DRIVE ALLEN WRENCHES BALL END 5/32” OSWORNE & CO. HARRISON, NEW JERSEY SCRIBER SNAP ON ½” DRIVE 6 POINT ½” THRU 1” THRU 3/8” XTENDER DIAL BORE GUAGE 1.4” TO 6” RANGE ELECTRICAL TOOLS SUNEX ½” DRIVE 6 POINT DEEP 9MM THRU 30MM & SNAP ON 3/8“ DRIVE BALL END ALLEN WRENCHES 4MM SNAP ON 6/12 VOLT BATTERY TESTER SHALLOW 9MM THRU 30MM THRU 10MM SPECIALTY WIRE CRIMPING TOOLS (SMALL & LARGE) SUNEX 3/8” DRIVE 7MM THRU 19MM 12 POINT RETHREADING TOOLS MATCO TOOLS LOADPRO 100 DYNAMIC TEST LEADS SNAP ON RETHREADING TOOL ½” TO 5 ¾” STANDARD BITS SNAP ON ¾” DRIVE 1 1/16” THRU 2” 12 POINT PLUS POWER PROBE III LEAD SET COMBO KIT AND ADDED 3 METRIC BITS 2” INDESTRO EXTRACTORS MATCO TOOLS AUTOMOTIVE SIGNAL WAVEFORM VIEWER SNAP ON TD 2425 TAP & DIE SET STANDARD SET PROTO 1” DRIVE 12 POINT 2 5/8” MAC BOLT EXTRACTORS 1/8” THRU 7/8” FLUKE PRESSURE/VACUUM TRANSDUCER MODULE BLUE POINT METRIC TAP & DIE SET TDM 117 SNAP ON 2 ½” 1” DRIVE 6 POINT MAC STUD PULLERS 3/8” THRU ½” SNAP ON VISUAL INPECTION DEVICE MAC TOOLS TAP & DIE SET 9/16” TO 1” 25 PIECE SNAP ON ¾” DRIVE 2 ¼” 12 POINT CORNWELL STUD REMOVER 6MM THRU 12MM (TAKES VIDEO & PICTURES) SNAP ON ¾” DRIVE 2 ¾” 6 POINT ALLISON TRANSMISSION USA BOLT EXTRACTORS 10MM THRU 19MM FAULTFINDER FF310 ELECTRICAL SHORT & OPEN CIRCUITS YOKE WALTON BROKEN TAP EXTRACTOR FINDER/TRACER MISCELLANOUS TOOLS SNAP ON – 2 ¾” 6 POINT REPAIRED SNAP ON PUNCH & CHISEL SET STANDARD SET CORNWELL DIAGNOSTICS CBPDMA2 AC/DC CLAMP METER PNUEMATIC TOOLS MAC TOOLS PLIER SET MAC FLUKE METER ET73 RATCHETS INGERSOL RAND ¼” AIR RATCHET MATCO MASTER IN LINE FLARING TOOL 2 SNAP ON 3/8” DRIVE RATCHET SWIVAL HEAD FINE TOOTH INGERSOL RAND 3/8” AIR DRIVE IMPACT MAC 13 PIECE HOLE SAW KIT ¾” TO 2 ½ INCH SNAP ON CRESCENT WRENCH SET 6”, 8”, & 12” ANITQUE TOOLS PLUS S STANTARD RATCHET INGERSOL RAND 3/8” DRIVE SHORT IMPACT WIRE STRETCHER SNAP ON RATTAIL FILE SET 3 PIECE 2 SNAP ON 3/8 DRIVE RATCHET (ONLY USED FOR 2 MONTHS) LEATHER HEADED HAMMER SNAP ON FLAT FILE SET HBF300 SNAP ON ½” DRIVE RATCHET INGERSOL RAND 3/8” DRIVE IMPACT CARPENTER’S BOX (ANTIQUE) BLUE POINT HOSE PINCHING PLIERS SNAP ON ½” DRIVE RATCHET (REBUILT SPRING 2017) BARNWOOD DOUBLE PULLY SNAP ON SNAP RING PLIERS INSIDE & OUTSIDE SNAP ON ½” DRIVE LONG HANDLED SWIVAL HEAD RATCHET INGERSOL RAND ½” DRIVE IMPACT BARNWOOD PULLY IRWIN 10 PIECE VICE GRIPS SET SNAP ON ½ DRIVE SHORT BREAK OVER M7 ½” DRIVE SHORT IMPACT (ONLY BEEN USED 3 TIMES) PULLY WITH EXTENSION MASTER APPLIANCE BUTANE POWERED SOLDERING KIT CORNWELL ½” DRIVE INPUT 3/8” DRIVE OUTPUT 24” LONG INGERSOL RAND ¾” DRIVE IMPACT VOLCAN ARM & HAMMER 250# ANVEL SNAP ON DEAD BLOW 24OZ SOFT HAMMER SNAP ON 3/8” DRIVE 12”, 8”, 3”, & 1” RATCHETS (USED VERY LITTLE SINCE REBUILT) WITH STAND & FOOT CLAMP SNAP ON DEAD BLOW 16OZ HAMMER SNAP ON 3/8” DRIVE 11”, 11 ½”, 4” RATCHETS MAC TOOLS 3/8” ANGLE HEAD REVERSIBLE DRILL TENT HEATING STOVE STAMPED US WHEELING DATED 1952 CORWELL 24OZ DEAD BLOW HAMMER SNAP ON ½” DRIVE 15” RATCHET SNAP ON DIE GRINDER BURNS WOOD, CAEROSEN, PROPANE MAC DEAD BLOW 32OZ HAMMER SNAP ON ½” DRIVE 8” RATCHET MATCO SILVER EAGLE DIE GRINDER (CUSTOMER HAS BURNED ALL 3) SNAP ON DEAD BLOW 40OZ HAMMER SNAP ½” DRIVE 3” EXTENSION ASTRO PNEUMATIC AIR NIBBLER GRINDING WHEEL USA 3/4” TORQ MULTIPLIER 4 TO 1 RATION SNAP ON AIR HAMMER LONG BARREL 2 MAC BITS 5 MARSON POP RIVET GUN HP-2 UNKNOWN BITS KNIPEX CHANNEL LOCKS 2 ½” 1 CORNWELL 1 AJAX AIR HAMMER BITS DAVIES 17” CHISEL & 15” PUNCH WRENCHES SNAP ON AIR HAMMER BITS MAC 18” PUNCH SNAP ON STANDARD LENGTH 12 POINT 3/8” THRU ¾” MAKITA 3/8” IMPACT ELECTRIC DRILL WITH CHARGER SNAP ON 12 POINT 13/16” THRU 1” OWNER: DANNY PROBST AUCTIONEER’S NOTE: Live onsite auction with on- AL HUGHES, AUCTIONEER line bidding.
Load more

Recommended publications
  • 06/27/19 Severson, Weathers, Mackey & Others Estate Auction
    09/25/21 09:13:59 06/27/19 Severson, Weathers, Mackey & Others Estate Auction Auction Opens: Sat, Jun 22 3:00pm PT Auction Closes: Thu, Jun 27 5:30pm PT Lot Title Lot Title 0001 Nice 2013 Kubota B2320HSD Tractor CASH 0028 Oxygen & Acetylene Torch Setup ONLY! 0029 Central Hydraulics 20-Ton Press 0002 Mac Tools MW200 UltraMig 200 Welder - 0030 2 Sets of Jack Stands Tested Works 0031 Motorcycle Stand? 0003 Ferret 40 Charging System Analyzer 0032 Portable Vehicle Hydraulic Lift / Jack 0004 Mac Tools 3-1/2? Ton MFJ35 Hydraulic Floor Jack 0033 Multi-Gear Lube Oil Drum w/Pump & Oil 0005 Dual Halogen Light Tripod Utility Light 0034 Central Pneumatic 3/8" & 1/2" Drive Air Wrenches 0006 FCI Professional Parts Cabinet - Loaded 0035 Central Pneumatic Air Wrench, Ratchet & 0007 FCI Professional Parts Cabinet - Loaded Flush Gun 0008 Cornwell Rolling Tool Chest - Loaded! 0036 Matco Tools 1/2" Drive Stubby Impact Wrench 0009 4 Halide Grow Light 22" x 20" Reflectors 0037 Mac Tools Air Cutoff Tool w/3 Bx. Of Cutoff 0010 Osram Sylvania Auto Bulbs Parts Organizer Wheels 0011 Sun Service Equipment Parts Cabinet - Loaded 0038 4 Drill Bit Indexes 0012 Sears Engine Analyzer & Mac Digital Multi- 0039 Automotive Tune Up Analyzer & Digital Multi- Meter Meter 0013 Pittsburg Heavy Duty 3-Ton Hydraulic Floor 0040 Mueller Kueps Universal Press Support Jack 0041 Easy Rider, Playboy & Other Magazines 0014 Matco Diagnostics Lab Scope & Digital 0042 Hydraulic Press Accessories & Jack Analyzer 0043 Come-A-Longs & Engine Hoist Crane 0015 Wilmar? 2-Ton Hydraulic Floor Jack
    [Show full text]
  • The Stanley Works 2005 Annual Report
    FINANCIAL HIGHLIGHTSHIGHLIGHTS (MILLIONS OF DOLLARS, EXCEPT PER SHARE AMOUNTS) 2005 2004 CHANGE Closing market price per share $ 48.04 $ 48.99 (2%) Total return (share price change plus dividends) 1% 35% Net sales from continuing operations $ 3,285 $ 2,997 10% Operating income from continuing operations $ 445 $ 412 8% Percent of sales 13.5% 13.8% (30bp) Net earnings from continuing operations $ 272 $ 237 15% Per share from continuing operations $ 3.18 $ 2.81 13% Net earnings $ 270 $ 367 (27%) Per share $ 3.16 $ 4.36 (28%) Free cash flow* $ 294 $ 317 (8%) Return on capital employed from continuing operations 14.8% 14.8% – Dividends per share $ 1.14 $ 1.08 6% * REFER TO PAGE 38 OF MD&A FOR THE RECONCILIATION OF OPERATING CASH FLOW TO FREE CASH FLOW TABLE OF CONTENTS LONG-TERM FINANCIAL OBJECTIVES BUSINESS SECTION SALES GROWTH Letter to Shareowners page 2 3-5% Organic Growth The Scorecard page 7 8-12% Growth Including Acquisitions Business Overview page 8 FINANCIAL PERFORMANCE FINANCIAL SECTION Mid-teens percentage EPS Growth Management’s Discussion And Free Cash Flow greater than or equal to Net Income Analysis of Financial Condition ROCE In 12-15% Range And Results of Operations page 31 Financial Statements page 47 DIVIDEND Notes page 51 Continued Growth CORPORATE SECTION CREDIT RATINGS Investor and Shareowner LONG-TERM“Upper Tier” Investment FINANCIAL Grade OBJECTIVES Information page 76 Board of Directors and Executive Officers page 77 THE STANLEY WORKS, AN S&P 500 COMPANY, IS A WORLDWIDE SUPPLIER OF TOOLS, HARDWARE AND SECURITY SOLUTIONS FOR PROFESSIONAL, INDUSTRIAL AND CONSUMER USE.
    [Show full text]
  • Automotive/Fabrication Shop 09-20-14 Auction Held At: 8600
    AUTOMOTIVE/FABRICATION SHOP 09-20-14 AUCTION HELD AT: 8600 S. I-35 SERVICE ROAD, OKC BUYER’S GUIDE The descriptions listed are believed to be correct, however, no warranty or guarantee, either express or implied shall be given, every item sold as is. Bidders shall rely upon their own inspections of the property and not upon any representations or descriptions of Dakil Auctioneers, Inc., either oral or written. ALL SALES FINAL ALL PROCEEDS DUE IMMEDIATELY FOLLOWING AUCTION 10% BUYER’S PREMIUM ON ALL PURCHASES 3% CONVENIENCE FEE ON ALL CREDIT CARD PURCHASES ALL ITEMS SOLD AS IS, NO WARRANTY OR GUARANTEE $50 PROCESSING FEE ON ALL TITLED VEHICLES REMOVAL TIMES : DAY OF AUCTION UNTIL 6:00 PM, SUNDAY SEPTEMBER 21ST FROM 1:00 PM - 4:00 PM, & MONDAY SEPTEMBER 22 ND FROM 9:00 AM - 5:00 PM. NO EXCEPTIONS! ALL ITEMS LISTED BELOW ARE LOCATED AT: 8600 S. I-35 SERVICE ROAD, OKC _______1 VACUUM PUMP ______35 ACT 3000 REFRIGERANT RECOVERY _______2 VACUUM PUMP RECYCLING _______3 VACUUM PUMP ______36 TOOL BOX & CABINET _______4 VACUUM PUMP ______37 CASE & PARTS (1X) _______5 VACUUM PUMP ______38 TRANSMISSION JACK _______6 VACUUM PUMP ______39 VAC & AIR TANK (2X) _______7 VACUUM PUMP ______40 DISTRIBUTOR CAPS (1X) BOX _______8 VACUUM PUMP ______41 OIL FILTERS (2X) BOXES _______9 PINNACLE A/C RECOVERY MACHINE ______42 MSA GAS MASK ______10 S/S CASE ______43 SURVIVAIR ______11 VACUUM PUMP ______44 CENTER CAPS (1X) LOT ______12 VACUUM PUMP ______45 RAPID FLEXX GUN ______13 VACUUM PUMP ______46 OU, MARBLES, WINDOW WASHER, ROPE, & ______14 VACUUM PUMP ELECTRIC
    [Show full text]
  • Stanley Black & Decker Annual Report 2020
    Stanley Black & Decker Annual Report 2020 Form 10-K (NYSE:SWK) Published: February 21st, 2020 PDF generated by stocklight.com UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-K ☑ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 28, 2019 or ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from ___________ to ___________ Commission File Number 001-05224 STANLEY BLACK & DECKER, INC. (Exact Name Of Registrant As Specified In Its Charter) Connecticut 06-0548860 (State or Other Jurisdiction of (I.R.S. Employer Incorporation or Organization) Identification Number) 1000 STANLEY DRIVE NEW BRITAIN, CT 06053 (Address of Principal Executive Offices and Zip Code) Registrant’s Telephone Number, Including Area Code 860 225-5111 Securities Registered Pursuant to Section 12(b) of the Act: Title Of Each Class Trading Symbol(s) Name Of Each Exchange on Which Registered Common Stock $2.50 Par Value per Share SWK New York Stock Exchange Corporate Units SWP New York Stock Exchange Corporate Units SWT New York Stock Exchange Securities Registered Pursuant To Section 12(g) Of The Act: None Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No ¨ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No þ Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.
    [Show full text]
  • Hand Tools Market
    +44 20 8123 2220 [email protected] Hand Tools Market - Global Outlook and Forecast 2020-2025 https://marketpublishers.com/r/H0D6A08854D7EN.html Date: September 2020 Pages: 312 Price: US$ 3,500.00 (Single User License) ID: H0D6A08854D7EN Abstracts In-depth Analysis and Data-driven Insights on the Impact of COVID-19 Included in this Global Hand Tools Market Report The global hand tools market by revenue is expected to grow at a CAGR of over 4% during the period 2019–2025. The global hand tools market is expected to grow 1.3X times during the forecast period. The market is expected to witness a considerable growth post-2020. Rapid industrialization and increasing applications in household and commercial sectors are primarily driving the market. Automobile, aerospace, construction, electronics, and shipbuilding are the major end-use of these devices. The tool industry landscape is moving toward sophistication and customization that can determine market leadership in a competitive scenario. Advancements in technology and the extensive usage of battery-driven devices have fueled the adoption of cordless power tools and related accessories that are light and durable. This growth factor for the substitutes is expected to challenge the potential of hand tools. The DIY culture can be one of the major drivers for these devices in the coming years with a high scope for penetration in growing economies. The global hand tools market suffered a downfall during the COVID-19 crisis as most economic activities were halted during Q1 and Q2 in 2020. Most major revenue- generating end-users such as construction, automotive, commercial renovation, and home improvement activities were affected, leading to a decline in the market sales.
    [Show full text]
  • Stanley Black and Decker Techtronic Industries Co Ltd (TTI) Chevron
    Who Owns What? Andrew Davis May, 2019 This is a redacted version of an article II found on protoolreviews.com. I remember growing up when General Motors offered different brands at different price points (until they all the brands started to overlap before GM collapsed) – Cadillac at the top end, followed by Oldsmobile, Buick, Pontiac, and Chevy. We have a similar situation in woodworking tools (also in kitchen appliances) except that in the case of tools, the multi-brand company is more often a case of acquisitions rather than organic development. Anyway, for those readers interested in the business side of tools, this column, which is a departure from my usual thread, may be of interest. Stanley Black and Decker Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. Dating back to 1843 with a man named Frederick Stanley, the company merged in 2010 with Black and Decker. As of 2017, the company maintains a $7.5 billion business in tools & storage alone. SBD brands include: DeWalt Stanley Black + Decker Bostitch Craftsman Vidmar Mac Tools Irwin Lenox Proto Porter-Cable Powers Fasteners Lista Sidchrome Emglo USAG Techtronic Industries Co Ltd (TTI) TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID and RYOBI names for cordless power tools (Emerson actually owns RIDGID and makes the red tools). Founded in 1985 in Hong Kong, TTI sells tools all over the world and employs over 22,000 people. TTI had worldwide annual sales of over US$6 billion in 2017.
    [Show full text]
  • SBA Franchise Directory Effective March 31, 2020
    SBA Franchise Directory Effective March 31, 2020 SBA SBA FRANCHISE FRANCHISE IS AN SBA IDENTIFIER IDENTIFIER MEETS FTC ADDENDUM SBA ADDENDUM ‐ NEGOTIATED CODE Start CODE BRAND DEFINITION? NEEDED? Form 2462 ADDENDUM Date NOTES When the real estate where the franchise business is located will secure the SBA‐guaranteed loan, the Collateral Assignment of Lease and Lease S3606 #The Cheat Meal Headquarters by Brothers Bruno Pizza Y Y Y N 10/23/2018 Addendum may not be executed. S2860 (ART) Art Recovery Technologies Y Y Y N 04/04/2018 S0001 1‐800 Dryclean Y Y Y N 10/01/2017 S2022 1‐800 Packouts Y Y Y N 10/01/2017 S0002 1‐800 Water Damage Y Y Y N 10/01/2017 S0003 1‐800‐DRYCARPET Y Y Y N 10/01/2017 S0004 1‐800‐Flowers.com Y Y Y 10/01/2017 S0005 1‐800‐GOT‐JUNK? Y Y Y 10/01/2017 Lender/CDC must ensure they secure the appropriate lien position on all S3493 1‐800‐JUNKPRO Y Y Y N 09/10/2018 collateral in accordance with SOP 50 10. S0006 1‐800‐PACK‐RAT Y Y Y N 10/01/2017 S3651 1‐800‐PLUMBER Y Y Y N 11/06/2018 S0007 1‐800‐Radiator & A/C Y Y Y 10/01/2017 1.800.Vending Purchase Agreement N N 06/11/2019 S0008 10/MINUTE MANICURE/10 MINUTE MANICURE Y Y Y N 10/01/2017 1. When the real estate where the franchise business is located will secure the SBA‐guaranteed loan, the Addendum to Lease may not be executed.
    [Show full text]
  • Boat Mechanic Snap-On; MAC Tool Shop Liquidation (September 11)
    09/24/21 04:21:21 Boat Mechanic Snap-On; MAC Tool Shop Liquidation (September 11) Auction Opens: Fri, Sep 5 7:00am PT Auction Closes: Thu, Sep 11 6:30pm PT Lot Title Lot Title WC2270 Tool WC2303 Various Tool Items WC2271 Hacksaw - 2 WC2304 Tool WC2272 Tool Parts WC2305 Handheld Tools WC2273 Tools WC2307 Handheld Tools WC2274 Tool Bits WC2308 Tools WC2275 Hacksaw - 2 WC2309 Tools WC2276 Hacksaw - 2 WC2310 Tool Kit - 1 package WC2277 Hacksaw - 2 WC2311 Knife Tools WC2278 Blades WC2312 Knives WC2279 Blades WC2313 Tools WC2280 Tool Items with Blades WC2314 Tools WC2281 Tool Items - 8 WC2315 Grinding Discs WC2282 Tool Bar Items WC2316 Long Shaft Electrical Die Grinder WC2283 Various Tools WC2317 Long Shaft Electrical Die Grinder WC2284 Tool Bar Items WC2318 Various Tool Bits WC2285 Tools WC2321 Tools - 2 WC2286 Simonds Tool WC2322 Tool WC2287 Tools WC2323 Blue Tool Items WC2288 Tools WC2324 Tools Bits in Red Case WC2289 Handheld Flathead Tools WC2325 Tool Bits in Bottle WC2290 Lincoln Tool WC2326 Tool Bits in Bottle WC2291 Euro Tool Flat Files WC2327 Tool Bits in Bottle WC2292 Ace Tool WC2328 Tool Bits in Bottle WC2293 Handheld Tools WC2329 Tool Bits in Bottle WC2294 Pittsburgh Tool WC2330 Tool Bits in Bottle WC2295 Handheld Flat Tools WC2331 Tool Bits in Bottle WC2296 various Flathead Tools WC2332 Tool Bits in Bottle WC2297 Tool WC2333 Tool Bits in Bottle WC2298 Euro Tool Flat Files WC2334 Tool Bits in Bottle WC2299 Handheld Flathead Tools WC2335 Tool Bits in Bottle WC2300 Tools WC2336 Tool Bits in Bottle WC2301 Tool and Case WC2337 Tool
    [Show full text]
  • Vehicle Lifts Equipment
    Pa. OnSite Auction Saturday April 28, 2018 South Hanover Automotive Auction Sale Listing Sale for Business located on Frederick St. Only Note: Owners closing Frederick St. Location but will Continue Business at Their Successful Baltimore St. Location Very Nice Equipment, Tools, Tire Racks, Vehicle Lifts, Office & Counters, 350,000 BTU Waste Oil Furnace Complete System, Fork Lift, John Deere Garden Tractor, Much More. Auction to last approx. 3 hours don’t be late. VEHICLE LIFTS 4-2 post vehicle “Rotary Lifts” approx. 4 yrs. old w/10,000 lb. cap., 12,000 lb. hydraulic vehicle lift purchased from Snap On & also has Snap On air hydraulic rolling Jack Beam 6,000 lbs. w/floor console control station, JLG vertical lift model 12SP max cap. 500 lbs. EQUIPMENT – TOOLS - OTHERS Equipment: Clark propane tow motor, Ingersoll Rand model No. 2475 air compressor, 2014 John Beam Visualiner model EEWA545B purchased from Snap On w/recent update computer scanner & screen, Accu-Turn Computerized Dynamic wheel balancer, EM43 Corghi computer wheel balancer, Ammco model 3000 Safe-Turn Brake Drum Lathe w/ Infimatic Feed, Cornwell Tools portable plasma cutter, Hobart Handler 190 230v wire feed welder 25-190 amp output, Goats tire changer, Lincoln electric ARC Welder SP-170T w/ cart & accessories, 60,000 lb. shop press, Smart Washer model 23 parts washer, Dewalt compressor, Lincoln Powerlube grease gun w/ case, Mac Tools oil reset tool ET3596 w/ case, MAC Tools integrated test light/voltometer, E.Z. Coder wire marker printer w/ case, Cornwell Tools Tech/Force scan
    [Show full text]
  • 2010 Annual Report
    2010 ANNUAL REPORT Segmentation Voice of the Customer Dynamic Resource Allocation Brand Management Policy Deployment MEASURING Risk Management Value Selling Innovation Talent SUCCESS Accelerated Product Development Sales Force Initiatives Emerging Markets Digital Marketing DBS 2010 ANNUAL REPORT In 2010, Danaher updated reporting segments to reflect the evolution of our business to a science and technology company. We now report results in five business segments: Test & Measurement; Environmental; Life Sciences & Diagnostics; Dental; and Industrial Technologies. TEST & MEASUREMENT Our Test & Measurement segment is a leading, global provider of electronic measurement instruments and monitoring, management and optimization tools for communications and enterprise networks and related services. Our products are used in the design, development, manufacture, installation, deployment and operation of electronics equipment and communications networks and services. Customers for our products and services include manufacturers of electronic instruments; service, installation and maintenance professionals; network equipment manufacturers who design, develop, manufacture and install network equipment and service providers who implement, maintain and manage communications networks and services. Also included in our Test & Measurement segment are our mobile tool and wheel service businesses. Financial Operating Highlights 2010 2009 (dollars in thousands except per share data and number of associates) Sales $ 13,202,602 $ 11,184,938 Operating profit
    [Show full text]
  • Special Offers on Tools
    Special Offers On Tools Synonymous and tactical Jefry scorifies so anomalistically that Heath nomadise his premed. Denotable Hunter pencils questingly while Wilhelm always infringe his overcompensation drudging apolitically, he abases so adagio. Hyacinthine and hegemonic Francis ensues almost naively, though Stern tenderised his groundings clue. The 13 Best initial Tool Brands For Professionals and Homeowners. Snap-on Store. Best Time of Year or Buy Things for Your lap Like Tools. Deals and Special Offers on Heating Stoves Harman Stoves. Setting offer details The tool allows you to pick the type of scholarship you'd like many run. GMT Deals Glacern Machine Tools. 25 Awesome Free Google Tools for Marketers Neil Patel. Which yield better Bosch or DeWalt? Cutting Tools Home Special Offers Monthly Sales Flyer Cutting Tools Filter Shopping Options Tool Bit Category Brazed Threading 1. ISN Expo Offers Tools Training Vehicle Service Pros. Offers & Tools to factory You Online Google for brass Business. Use the CardMatch tool we get the welcome offers The. Promotional package Extendable hose 30 meters with spray gun with 7 fu. Ways to Save their Harbor Freight. Woodcraft Holiday Headquarters. And text messages from MAC TOOLS with airline special offers promotions and other. Makita DCM501ZAR 10v CXT 1v LXT Special Edition Red Coffee Maker. Where is aware best wanted to buy tools? Got very old TDM-based Pro Tools HD system show your tangible and speedand get three years of upgradeswhen you wheel to Pro Tools HDX. The Work Tools Professional Store Discounts on guy Best STAHLWILLE Torque Control Custom Quotes Worldwide Shipment Discover the.
    [Show full text]
  • Wavebid > Buyers Guide
    Lot Quantity Title Description Inventory Number Number 1000 1 Assorted Assorted Costume Jewelry (760851) 760851 Costume Jewelry Assorted 1001 1 Costume Jewelry Assorted Costume Jewelry (760850) 760850 Assorted Watches 1002 1 Unknown Assorted Watches Unknown Working Condition (762979) 762979 Working Condition David Yurman 1003 1 Bracelet in Box David Yurman Bracelet in Box Marked 925/585 (762962) 762962 Marked 925/585 (2pc) Mens Namebrand 1004 1 Watch (2pc) Mens Namebrand Watch Unauthenticated (755431) 755431 Unauthenticated (3pc) Namebrand Watches 1005 1 Unknown (3pc) Namebrand Watches Unknown Working Condition (763008) 763008 Working Condition (3pc) Namebrand Wacthes 1006 1 Unknown (3pc) Namebrand Wacthes Unknown Working Conditon (763007) 763007 Working Conditon Marked Namebrand 1007 1 Mens Watch Marked Namebrand Mens Watch Unauthenticated, Automatic Watch (755422) 755422 Unauthenticated Womens Marked Namebrand Watch 1008 1 Unauthentictaed Womens Marked Namebrand Watch Unauthentictaed Unknown Working Condition (762988) 762988 Unknown Working Condition Mens Marked Namebrand Watch 1009 1 Unauthentictaed Mens Marked Namebrand Watch Unauthenticated Unknown Working Condition (762982) 762982 Unknown Working Condition 1010 1 Like New Name Like New Name Brand Watch (755361) 755361 Brand Watch (2pc) 925 Silver Bracelet & Ring 1011 1 w/Colorful (2pc) 925 Silver Bracelet & Ring w/Colorful Stones (762958) 762958 Stones Apple Watch Series 4 Apple Watch Series 4 (Unknown Working Conditions, Damaged) (768132) (All Computers and (Unknown Electronics are untested and sold AS-IS. Drives and operating systems may have been wiped 1013 1 Working or removed and passwords are unknown. Computers may be missing parts. Phones and 768132 Conditions, Tablets are of unknown condition and may have Unknown Carrier, May be Locked, or have Damaged) an unknown password.
    [Show full text]