Which Shipping Container Is Right for You?

Total Page：16

File Type：pdf, Size：1020Kb

Which Shipping Container is Right for You? Mica Corporation delivers products in a variety of sizes to ensure you get just the right amount of product delivered to you safely and efficiently every time. Pails Our 5 gallon (18 L) pails are the ideal option for small orders or trials. Specs: Holds 40 lbs (18 kg) of product Comes with gasket providing secure seal Recessed lid provides stacking stability with various insert options Dimensions: Height: 14.5" (37 cm) Diameter: 12.24" (31 cm) Shipping: We can ship a maximum of 27 pails per pallet Drums Our closed-head drums are recyclable, have two openings for your convenience and can hold 55 gallons (208L) of product. For information on how to properly dispense MICA products from drums, please ask your technical sales representative for the Primer Intelligence article entitled "Dispensing Mica Primers from Plastic, Closed-Head Drums." Specs: Holds 450 lbs (204 kg) of product Closed-head 2" NPS threaded opening & plug with male thread 2" Buttress threaded opening & plug with male thread Dimensions: Height: 34.80 +/- 0.20" (882 +/-5 mm) Diameter: 23.30 +/- 0.12" (592 +/-3 mm) Shipping: A pallet can hold up to 4 drums a 20' (6 m)container can hold up to 80 drums (double stacked) or 40 drums (not stacked) Totes Intermediate bulk container (IBC) totes hold 275 gallons (1,041 L) of product ,and come with a 2" BSP threaded fill fitment with protective cap and locking ring. A dispensing adapter and valve are also provided to you, free of charge, with your first tote order (see photos below for reference). For more information about dispensing MICA products from totes, please ask your technical sales representative for our "Tote Dispensing" Primer Intelligence article. Specs: Holds 2,250 lbs (1,021 kg) of product Exterior is constructed of recyclable corrugated paperboard Liner is made of 3 ply, 3.2 mil type 43 coextruded LDPE to prevent leaks Adapter Dimensions: 41" X 41" X 42" Shipping: Valve a 20' (6 m) container holds 10 totes a 40' (12 m) container can hold up to 18 totes Pallet & Shipping Information Pallets: Measure 44x 44" Weigh 60 lbs (27 kg) each Heat-treated Two-sided entry Reusable Shipping: There is a 45,000 lbs (20,411 kg) limit for any truck Interested in trying a sample? Want to purchase a smaller amount? Pint jars & Gallon jugs are also available! Please contact your Mica Technical Sales Representative for more information. Mica Corporation © July 15, 2015 .

Copy Link

Recommended publications

Usda Commodity Requirements
USDA COMMODITY REQUIREMENTS VO12 VEGETABLE OIL PRODUCTS FOR USE IN EXPORT PROGRAMS Effective Date: 02/1/08 USDA COMMODITIY REQUIREMENTS VO12 VEGETABLE OIL PRODUCTS FOR USE IN EXPORT PROGRAMS Table of Contents Part 1 COMMODITY SPECIFICATIONS ______________________________________ 1 Section 1.1 COMMODITIES ___________________________________________________ 1 Section 1.2 QUALITY DISCOUNTS_____________________________________________ 1 Section 1.3 UNDER-FILL LIMIT _______________________________________________ 2 Section 1.4 QUALITY ASSURANCE ____________________________________________ 2 Part 2 CONTAINER AND PACKAGING REQUIREMENTS _______________________ 2 Section 2.1 GENERAL ________________________________________________________ 2 Section 2.2 CONTAINERS AND MATERIALS ___________________________________ 3 Section 2.3 PACK SIZES ______________________________________________________ 3 Section 2.4 SHIPPING CONTAINERS___________________________________________ 6 Section 2.5 PERFORMANCE SPECIFICATIONS _________________________________ 6 Part 3 MARKING REQUIREMENTS __________________________________________ 7 Section 3.1 4-LITER CYLINDRICAL-STYLE CANS ______________________________ 7 Section 3.2 4-LITER PLASTIC CONTAINERS ___________________________________ 7 Section 3.3 SHIPPING CONTAINERS FOR ALL 4-LITER CONTAINERS ___________ 8 Section 3.4 20-LITER PAILS (EXCLUDING MONETIZED PROGRAMS) ____________ 8 Section 3.5 208-LITER DRUMS_________________________________________________ 9 Section 3.6 MARKING LETTERS ______________________________________________
[Show full text]
Event Guide Is Sponsored by a @Intermodaleu
SANY PORT MACHINERY. Stand B82 5-7 NOVEMBER 2019 | HAMBURG MESSE YOUR PLATFORM IN EVENT EUROPE TO MEET THE ADVERT GLOBAL CONTAINER INDUSTRY GUIDE SANY has the vision and capability to offer a refreshing alternative to the market. Customer solutions are developed and produced meeting the highest European standards and demands. Quality, Reliability and Customer Care are our core values. The team in SANY Europe follows each project from the development phase through to the ex-works dispatch and full customer satisfaction. Short delivery times and 5 years warranty included. FLOORPLAN • EXHIBITOR A-Z • CONFERENCE PROGRAMME • PRODUCT INDEX The Event Guide is sponsored by A @intermodalEU www.intermodal-events.com Sany Europe GmbH · Sany Allee 1, D-50181 Bedburg · TEL. 0049 (2272) 90531 100 · www.sanyeurope.com Sany_Anz_Portmachinery_TOC_Full_PageE.indd 1 25.04.18 09:58 FLOORPLAN Visit us at Visit us at Visit us at EXHIBITOR A-Z stand B110 stand B110 stand B110 COMPANY STAND COMPANY STAND ABS E70 CS LEASING E40 ADMOR COMPOSITES OY F82 DAIKIN INDUSTRIES D80 ALL PAKISTAN SHIPPING DCM HYUNDAI LTD A92 ASSOCIATION (APSA) F110 DEKRA CLAIMS SERVICES GMBH A41 AM SOLUTION B110 EMERSON COMMERCIAL ARROW CONTAINER & RESIDENTIAL SOLUTIONS D74 PLYWOOD & PARTS CORP F60 EOS EQUIPMENT OPTIMIZATION BEACON INTERMODAL LEASING B40 SOLUTIONS B80 BEEQUIP E70 FLEX BOX A70, A80 BLUE SKY INTERMODAL E40 FLORENS ASSET MANAGEMENT E62 BOS GMBH BEST OF STEEL B90 FORT VALE ENGINEERING LTD B74 BOXXPORT C44A GLOBALSTAR EUROPE BSL INTERCHANGE LTD D70 SATELLITE SERVICE LTD B114
[Show full text]
HAZMAT Transportationtm Compliance I Security I Safety for All Modes of Transport
The Journal Of HAZMAT TransportationTM Compliance I Security I Safety For All Modes of Transport Volume 29, Number 6 I March /April 2019 A Discussion of the Federal EPA Empty Container Rule: Purpose and Application By Paul W. Rankin & Lawrence W. Bierlein, Esq. The Journal of HazMat Transportation™ focuses exclusively on providing expert updates, reviews and guidance on complying with U.S. and International hazardous materials transportation regulations. For 28 years, it has been an indispensable management tool for both large and small organizations, and government agencies throughout North America and Europe. Our service provides actionable guidance to those who must comply with hazardous materials regulations in the chemical, aerospace, pharma- ceutical, industrial packaging, and package testing industries by systematically reviewing and evaluating new and existing regulations. A Publication of PRI International, Inc. / 877-429-7447 / www.hazmatship.com Published and Printed in the United States of America / Copyright 2019 by PRI International, Inc. Reproduction Prohibited. All rights reserved. A Discussion of the Federal EPA Empty Container Rule: Purpose and Application By Paul W. Rankin & Lawrence W. Bierlein, Esq. Introduction of the industry as hazardous waste “treatment, storage and disposal 2 he industrial packaging reconditioning industry serves an facilities” (TSDF) was warranted. EPA was willing to considered indispensable role in promoting the economy of the United whether it should regulate the removal of small amounts of residue TStates by providing for the safe transportation, cleaning and from industrial containers that previously held a regulated sub- reuse of millions of industrial packagings annually. Industrial con- stance. EPA concluded it was not necessary to do so.
[Show full text]
Package Design Bro
Packaging Designs For Automotive Parts REV. 04/01 This brochure is intended to assist automotive packaging specialists Flat Style Hood Design with packaging designs for hoods, Specially engineered pads and roll-ups provide vital cushioning and Acceptable Shipping Guidelines doors, trunks and windshields. help prevent movement during shipping. ® Designs featured are the creations of FedEx® Express packaging engineers For FedEx Express Freight Service ® and have passed the FedEx Express Forklift/Pallet Jack Base • To consolidate multiple piece shipments and protect Packaging Design and Development Rear roll-up pad. Roll-up slit cut pad. against the elements, use shrink or stretch wrapping. All test procedures. All designs are 275# BC flute. 275# C flute. All freight shipments over 150 pounds (68 kg) must be shrink or stretch-wrapped shipments should be banded secured on a forkliftable base and be compatible for available for FedEx customer use. or strapped together as described to prevent shifting and pallet jack usage. The minimum specifications for a typical loss of packages. Individual packages should include the An important aspect of each design base for forklift or pallet jack configuration are illustrated origin and destination address whenever possible. Cover is the use of cost effective corrugated below. Pallet jack entry is required on two sides of either the top layer of the shipment to protect the unitized load pads/roll-ups which provide sufficient type base. from the weather. cushioning needed to prevent damage Labeling Tips during transit. • Remove or mark through all old labels. 3" If you would like more detailed • Attempt to follow all orientation symbols or verbiage information on any of these designs, 7" (“TOP LOAD ONLY,”“DO NOT STACK,” ”THIS SIDE UP,” etc.) please call the FedEx Packaging 7" for all skidded shipments.
[Show full text]
The Possible Impact of New Packaging System Concepts on Traditional Corrugated Box Markets ~
THE POSSIBLE IMPACT OF NEW PACKAGING SYSTEM CONCEPTS ON TRADITIONAL CORRUGATED BOX MARKETS ~ Thesis for the Degree of .Ph. D. MICHIGAN STATE UNIVERSITY DAVID L. OLSSON 1967 -_ A h. M III III I III II III III II II II III II III! II LIBRARY Michigan State University This is to certifg that the thesis entitled THE POSSIBLE IMPACT OF NEW PACKAGING SYSTEM CONCEPTS ON TRADITIONAL CORRUGATED BOX MARKETS presented by David L. OIsson J has been accepted towards fulfillment, . of the requirements for the Ph. D. deg-me inForest Products 0 ‘ @%W or professor v Date October 3I , I967 0—169 RETURNING MATERIALS: MSU Place in book drop to LIBRARIES remove this checkout from your record. FINES will be charged if book is returned after the date stamped below. W955 A 71533 I I I I ABSTRACT THE POSSIBLE IMPACT OF NEW PACKAGING SYSTEM CONCEPTS 0N TRADITIONAL CORRUGATED BOX MARKETS By David L. OIsson Packaging of products for storage and shipment has a history which extends back 5000 years to stone cosmetic kits of MeSOpotamia. Over the years since that time, various package forms have become dominant methods for the shipment of goods. Some, such as leather bags, kegs, barrels, and wooden boxes have nearly completely disappeared from use. Packages serve several functions in the distribution of goods to the market place. Packages protect the product and protect the environ- ment, make goods convenient to handle, store, ship, and use, and moti- vate the customer to buy the product and use it correctly. Shipping packages accomplish these functions within a distribution system which extends from the product-producing center, through the distribution channel, to the point where the consumer uses the product and disposes of the package.
[Show full text]
Replacing a Disposable Shipping Container with a Reusable Packaging System for a Supplier Electronic Assembly
Rochester Institute of Technology RIT Scholar Works Theses 1994 Replacing a disposable shipping container with a reusable packaging system for a supplier electronic assembly Allen Perry Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation Perry, Allen, "Replacing a disposable shipping container with a reusable packaging system for a supplier electronic assembly" (1994). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. Replacing a Disposable Shipping Container With a Reusable Packaging System for a Supplier Electronic Assembly by Allen Perry A Thesis submitted to the Department of Packaging Science College of Applied Science and Technology in partial fulfilment of the requirements for the degree of MASTER OF SCIENCE Rochester Institute of Technology 1994 Department of Packaging Science College ofApplied Science and Technology Rochester Institute ofTechnology Rochester, New York CERTIFICATE OF APPROVAL M.S. Degree The M.S. Degree thesis ofAllen M. Perry has been examined and approved by the thesis committee as satisfactory for the thesis requirements for the Master of Science Degree Date 2/7/96 David L. Goodin David L. Olsson Nancy B. Boorsure 11 Replacing a Disposable Shipping Container with a Reusable Packaging System for a Supplier Electronic Assembly. I, Allen M. Perry, hereby state that this document or thesis may be used for reference in the department of Packaging Science, Rochester Institute ofTechnology, Rochester, New York.
[Show full text]
Intermediate Bulk Containers (Ibcs) General Faqs
Intermediate Bulk Containers (IBCs) General FAQs WHAT IS NFPA 30? NFPA 30 is the Flammable and Combustible Liquids Code published by the National Fire Protection Association. The code provides safeguards to reduce the hazards associated with the storage, handling and use of flammable and combustible liquids. NFPA 30 is the law in most states. WHERE IS NFPA 30 THE LAW? are permitted to be stored in these containers. However, the composite IBCs must be listed and labeled. The complete NFPA 30 is enforceable under building and fire prevention rules on what types of IBCs are allowed in buildings can be codes in the following states: Ala., Ariz., Ark., Calif., Colo., found in Chapter 9 of NFPA 30 (visit www.nfpa.org/30 to Conn., Fla., Hawaii, Iowa, Ill., Ind., Kan., Ky., Mass., Maine, access the chapters for free). Mich., Minn., Mo., Mont., N.D., Neb., N.J., N.M., Nev., Ohio, Ore., R.I., Texas, Utah, Va., Vt. and Wis. It is also enforceable in several local jurisdictions. Other avenues of WHAT IS THE FIRE HAZARD OF A COMPOSITE IBC? enforcement may include Occupational Safety and Health When composite IBCs containing combustible or flammable Administration (OSHA) regulations. liquids are stored together in warehouses or other facilities, they can cause dangerous pool fires. These fire hazards WHAT IS AN INTERMEDIATE BULK CONTAINER (IBC)? have two components: Intermediate bulk containers are closed shipping vessels 1. Release of combustible and flammable liquids. with a liquid capacity from 450 up to 3,000 L (119 to 793 When IBCs containing flammable or combustible gallons).
[Show full text]
Chapter 6: Handling, Packing, and Shipping
Chapter 6: Handling, Packing, and Shipping A. Introduction .................................................................................................................................. 6:1 B. Handling Objects..........................................................................................................................6:2 Why are careful handling practices important?................................................................................ 6:2 Who needs to learn safe handling practices?.................................................................................. 6:2 What basic practices can I use to safely handle and move objects in the museum? ........................ 6:2 How should I proceed with moving an object? ................................................................................ 6:3 What are the basic rules for handling museum objects?.................................................................. 6:4 What is the best way to protect an object I must pick up? ............................................................... 6:6 When should I wear gloves?........................................................................................................... 6:6 What should I do if I damage an object? ......................................................................................... 6:6 What personal health and safety issues should I consider when handling museum objects?........... 6:7 C. Moving Objects Within the Museum...........................................................................................
[Show full text]
03/07/16 03/07/16 03/08/16 03/08/16 Rc-Upf
UPF PROJECT PROCEDURE Title: COMPRESSED GAS CYLINDERS, LIQUFIED PETROLEUM GAS, AND LIQUFIED INERT GASES Document Number: UPF-CP-225 Revision: 004 Page: 1 of 14 Prepared by: . 03/07/16 . , Approved by: . 03/08/16 . ,- . 03/08/16 . Concurrence by: . 03/07/16 . . 03/08/16 . ! " # . 03/08/16 $% &'( . ) * . 03/09/16 . + RC-UPF DMC This document has been reviewed by a Y-12 DC / 03/09/16 06:40 UCNI-RO and has been determined to be UNCLASSIFIED and contains no UCNI. This review does not constitute clearance for Public Release. Name:________________________ Date:__________02/23/16 UPF-CP-225 Revision 004 Page 2 of 14 Compressed Gas Cylinders, Liquefied Petroleum Gas, and Liquefied Inert Gases Revision History Revision Reason/Description of Change This revision is a complete rewrite, therefore no revision bars are shown. This 004 procedure further implements Bechtel Core Process 225, %. , , , Bechtel Core Process 211, + , , and Project specific requirements; and supersedes UPF-CP-225, %. , , and Y73-400, %. ,, . 003 Adopted initial issue from Bechtel Core Process 225 at its current revision 3. UPF-CP-225 Revision 004 Page 3 of 14 Compressed Gas Cylinders, Liquefied Petroleum Gas, and Liquefied Inert Gases Table of Contents 1.0 PURPOSE ..................................................................................................................................4 2.0 GENERAL ..................................................................................................................................4
[Show full text]
Beware: Uncontrolled Heat, Humidity Can Damage Stored Materials
maintenance | continued Excessive humidity can cause “container sweat” and drip con- densation on boxes and materials. SHIPPING CONTAINERS PART 2 Too hot for the box Don’t store the following in a shipping container Beware: Uncontrolled heat, without climate control: • Bonding agents humidity can damage • Solder • Epoxy and adhesives stored materials catalysts • Lubricants (grease and oil) by Preston Ingalls • Hydraulic fluids ou should be aware of two cal conditions, the ceilings of many • Glycols distinct downsides to repur- shipping containers will easily reach • Paints (aerosol and cans) posing shipping containers: well over 100 degrees in the summer. • Alcohol heat and humidity. The hot metal ceiling causes humid- • Soaps During the Vietnam conflict, ity in the air to begin to condense Yshipping containers were repurposed about 6 inches near the ceiling, • Water in plastic bottles by military units as storage for motor which is referred to as the “sweat • Solvents pool parts, aviation components and zone.” Droplets form on the ceiling • Gaskets ammo – the forerunner to their use and upper vertical band of the walls, • O-rings in construction. producing what is commonly called • Seals In Vietnam, they were commonly “container rain” or “container sweat.” • Belts known as “sweat boxes” because the This level of heat and humidity is heat from the tropical sun would pro- too much for a wide range of prod- • Circuit boards duce dripping condensation inside ucts and materials (see sidebar). • Filters where the average temperature was Even without any condensation, el- • Semiconductor devices 15 degrees hotter than the exterior. evated humidity over time can cause and electronics While most shipping containers in damage.
[Show full text]
Faqs for Reusable Shipping Containers
FAQs for Reusable Shipping Containers As Merck transitions to the new Reusable Shipping Containers, we know there will be lots of questions. Below are questions and answers that we hope will help with what to do with the Reusable Shipping Containers, how to return them, impacts to shipping timeframes, and much more. Q: What is the reusable shipping container? A: Merck has worked with AeroSafe to utilize a new shipping container for Merck vaccine products that once received and product contents are removed, is returned to AeroSafe to eliminate waste and storage issues with customer offices. These new containers allow for multiple changes with regard to what we can ship and how we can ship it. Q: Are there changes to the shipping timelines with the new reusable shipping containers? A: Frozen products (ProQuad and VARIVAX) will ship with 2-4 days in transit. ProQuad will no longer be sent automatically overnight. Refrigerated products and M-M-R II purchased direct will also ship with 2-4 days in transit. Direct customers and indirect customers purchasing Merck products can still request overnight shipping for an additional fee. Q: What is the benefit of the longer shipping timeframe? A: Typically, shipments will be received in 2 days. An additional feature associated with these containers is that shipments can be shipped Thursday and Friday to be received the following Monday and Tuesday. This allows for more flexibility in shipping during peak vaccination seasons. Q: Is there a change to what vaccines can ship together? Or how many doses will come in a single container? A: For frozen vaccine shipments (M-M-R II, VARIVAX, and ProQuad), all vaccines can be combined to ship in a single container.
[Show full text]
Thermal Shipping Container Dry Ice Replenishment Instructions
PFIZER-BIONTECH COVID-19 VACCINE THERMAL SHIPPING CONTAINER DRY ICE REPLENISHMENT INSTRUCTIONS The Pfizer-BioNTech COVID-19 Vaccine has not been approved or licensed by FDA, but has been authorized for emergency use by FDA under an Emergency Use Authorization to prevent Coronavirus Disease 2019 (COVID-19) for use in individuals 12 years of age and older. The emergency use of this product is only authorized for the duration of the declaration that circumstances exist justifying the authorization of emergency use of the medical product under Section 564(b)(1) of the FD&C Act unless the declaration is terminated or authorization revoked sooner. Before administration of Pfizer-BioNTech COVID-19 Vaccine, please see Emergency Use Authorization (EUA) Fact Sheet for Healthcare Providers Administering Vaccine (Vaccination Providers) including Full EUA Prescribing Information available at www.cvdvaccine-us.com. 1 of 5 Current as of May 20, 2021. For the most up-to-date brochure, visit www.cvdvaccine-us.com. CAUTION: Use of dry ice in confined spaces (small rooms or walk-in coolers) and/or poorly ventilated areas can result in depletion of oxygen, causing asphyxiation. Exposed skin should be protected from contact with dry ice. Wear safety goggles or safety glasses with side shields. To ensure appropriate controls are in place, review the Dry Ice Safety Data Sheet BEFORE accessing the contents of the thermal shipping container and consult with your Occupational Health Department. THERMAL SHIPPING CONTAINER TEMPORARY STORAGE DRY ICE REPLENISHMENT INSTRUCTIONS Follow the instructions and requirements outlined in this booklet when using the thermal shipping container for temporary storage of the Pfizer-BioNTech COVID-19 Vaccine.
[Show full text]