Gigabit Passive Optical Network Unit

MODEL PPM520M520 GIGABIT PASSIVE OPTICAL NETWORK UNIT

Fully featured Triple-Play GEPON Fiber Access Gateway with Router, Wi-Fi, CATV and VoIP

www.amt.com PM520 Series Gigabit Ethernet Passive Optical Network ONU

About the Product The PBN PM520 ONU series provides a complete customer premises input optical power range of -8 dBm to +2 dBm. solution for passive splitted Fiber-to-the-Home (FTTH) networks. The Fully integrated into PBN's NMS3 Network Management and PM520 features a full set of applications such as home gateway with Provisioning solution and with support for TR069, this device can be firewall, Wi-Fi access point with up to 4 SSIDs as well as VoIP and deployed rapidly in the field without difficult back-office integrations. full-spectrum CATV overlay. Based on IEEE GEPON technology, the entire service package is delivered through a single fiber (dual-fiber option available). A compact and attractive design was applied to the PM520 allowing for easy installation and operation in ONU stand-alone fashion or in a wall/desktop installation. Each PM520 is delivered with a fiber- management tray which prevents the end-user to obtain any access to the sensitive fiber connection. The full-spectrum CATV module incorporates an Automatic Gain Control (AGC) circuit to maintain a constant RF output level over an

Key Features and Functions

• Service access over IEEE802.3ah compliant PON, shared • Ideal for in-home installation, either on a desktop or wall-mounted. with up to 64 customers with CATV overlay Includes fiber organizer for stand-alone installation with cover, or snap-on to PM520 unit • Four auto-negotiating Gigabit Ethernet subscriber ports for 10/100/1000 Mbps, half-duplex/full-duplex, auto-crossover • High-performance optical CATV receiver delivering full-spectrum operation (MDI/MDIX) television from 45 to 1000MHz • Management through DOCSIS-like DHCP/TFTP flow, TR069, • CATV module incorporates an Automatic Gain Control (AGC) circuit an embedded web-server and plain XML configuration file to maintain a level effective output voltage over -8 to +2 dBm optical input power and can be turned on/off via management • Enhanced security with 128-bit AES software • Supports up to 4 SSIDs to support hospitality or hotspot • IPv6 supported applications • SIP VoIP functionality with two physical POTS ports • Integrated system management by PBN NMSE for broadband data service and CATV operations • 2x2 802.11b/g/n WiFi capability

Typical Application

The PM520 series ONUs are ideal for use in commercial as well as residential installations where cost-efficiency is of the essence. The application diagram represents a typical hybrid HFC-FTTx scenario with CATV overlay utilizing AIMA3000 technology from PBN. Due to its extensive feature set, the PM520 has been successfully deployed in hospitality applications where multiple Wi-Fi SSIDs, IPTV and security applications are used in a dense short-haul deployment. Integrated into a single management system, the entire HFC-FTTx environment is able to be monitored and provisioned by the operator from a single screen. For the CATV overlay components, the larger AIMA3000 carrier-grade RF headend solution can be scaled down based on operator needs to PBN’s 1RU EDFA and LTE product line.

Copyright © 2013 Pacific Broadband Networks (PBN). All rights reserved. Reproduction without consent is prohibited. In the interest of continuous product development, specifications may change without notice. PBN.PM520 - A4-Datasheet V2b - Draft 24 Mar 14 PM520 Series Gigabit Ethernet Passive Optical Network ONU

Specifications

Optical Interface CATV Link Performance 42 CENELEC channels Data TX operating (as per EN50083-3) wavelength 1310 nm ± 20 nm CNR > 48 dB Data RX operating CSO < -55 dBc wavelength 1490 nm ± 10 nm CTB < -61 dBc Optical RX sensitivity < -24 dBm @ 1490 nm 110 NTSC channels Data RX saturation ≥ -6 dBm @ 1490 nm (as per NCTA standard) CNR > 48 dB Data TX output -1 dBm to 4 dBm @ 1310 nm CSO < -55 dBc Data speed CTB < -61 dBc Downstream 1 Gbps Upstream 1.25 Gbps Optical connector SC/PC (SC/APC with CATV) VoIP Performance

VoIP SIP v2 User-Side Ports Voice algorithms G.711, G.729 Call forward unconditional 4x10/100/1000 Mbps, full/half Call forward on busy Interface duplex with auto-negotiation, auto MDI/MDIX Call forward on no answer Call hold / release IEEE802.1D 4k MAC addresses total per ONU Call waiting IEEE802.1Q VLAN support, QinQ support Features Caller ID QoS IEEE802.1p Line Echo Cancellation (LEC) Adaptive jitter buffer Frame size 64 to 1522 bytes Packet Loss Concealment Data security 128-bit AES Comfortable Voice Generator Modem/Fax support (T.38) Connectors 4x RJ45 Option 66 & 67, supporting auto DHCP provisioning and associated DHCP option codes for TFTP config server 2 x RJ-11 connectors CATV Performance Interface 2 separate phone lines CATV input -8 to +2 dBm CATV ON/OFF control ON/OFF by microcontroller General CATV wavelength 1550 ± 5 nm RF output 80 dBμV @ -5 dBm(1) Input voltage 11V - 15 Vdc RF bandwidth 45 ~ 1000 MHz Mains power adapter 100~240 Vac, 50~60 Hz, 0.5 A max. RF flatness ± 1 dB Power consumption < 16 W (data, VOIP, CATV, Wi-Fi) RF return loss > 14 dB Operating temperature -10 ºC to +50 ºC Optical isolation Storage temperature -20 ºC to +70 ºC > 30 dB (CATV and data) Operating / storage 10 % to 90 % (non-condensing) Receiver noise current 4,0 pA/Hz humidity RF connector SCTE F-type Dimensions (H x W x D) 46 mm x 207 mm x 147 mm Net weight 0.55 kg Carton dimensions 88 mm x 325 mm x 210 mm (1) Measured with PBN LTM15 test transmitter over 5 km fiber, set for (H x W x D) -5 dBm optical input at 1550 nm with 4 % OMI. Packed weight * 1.2 kg Shipping carton dimensions 450 mm x 445 mm x 345 mm (contains 10 units) Shipping carton weight 13 kg (contains 10 units)

* Including AC Power Adapter and accessories.

Order Details PM520-[V]-[W]-[X]-[Y]-[Z] Gigabit Ethernet Passive Optical Network ONU Options: V CATV Option Y Fibre 00 No Video S Single Fibre TV 1550nm CATV Video Z Fibre Con Type W POTS Option S SC/APC VO Two POTS P SC/PC ( for models without CATV only ) X Gateway Option W 802.11b/g/n + NAT

Standard Models

PM520-00-VO-W-S-P PM520 EPON-UPLINK+4GE+2POTS+WIFI/ROUTER PM520-TV-VO-W-S-S PM520 EPON-UPLINK+4GE+CATV+2POTS+WIFI/ROUTER Other configurations available upon request. Please contact your PBN sales representative Accessories AC Power Adapters ONU10-PS-XX PM/CP/DPON Power Adapter - with XX=AU (Australia), CN (China), EU (Europe), US (United States), CH (Switzerland), plug Additional country-specific AC Power Adapters are available upon request. Companion Equipment AOCM6000 Equipment AOCM-60-CH06 Chassis 19”, 6RU, 3 card slots, 2 power supply slots, empty AOCM-60-CH09 Chassis 19”, 9RU, 6 card slots, 2 power supply slots, empty AOCM-60-CH12 Chassis 19”, 12RU, 10 card slots, 2 power supply slots, empty AOCM-60-B Power supply unit 1 kVA 48 Vdc for AOCM-60-CH12 AOCM-60-M Power supply unit 1 kVA 110/230 Vac 50/60 Hz for AOCM-60-CH12 AOCM-60-S Power supply unit 600 W 110/230 Vac 50/60 Hz for AOCM-60-CH06/09 AOCM-60-SCC-096 Switching and control card 96 Gbps (45 W) AOCM-60-SCC-192 Switching and control card 192 Gbps (50 W) AOCM-60-SCC-384 Switching and control card 384 Gbps (60 W) AOCM-60-8PON-8GE-SFP 8xPON, 8xGE OLT link card AOCM-60-16PON-8GE-SFP 16xPON, 8xGE OLT link card

OCMR Equipment

OCMR-SNMP Sub-rack 19” 5RU, with two power-supply slots and 10 module slots, with SNMP/HTTP. QOLTM Optical line terminal module for two or four Gigabit Ethernet Passive Optical Network ports. SCMM Control and management module for OLTM/QOLTM.

Standalone Equipment LTE153-6000 Externally-modulated laser transmitters for larger networks or longer fiber distances. LT1550 Laser transmitter in 19” sub-rack 1RU, 1550 nm, 6~250 mW, for 45~1000 MHz CATV services, with SNMP/HTTP. EDFA Erbium-doped fiber amplifier 19” sub-rack 1RU, 1550 nm, 20~1280 mW, up to 32 ports, with SNMP/HTTP. OSF-19 Optical splitters in 19” sub-rack. Standard units 4, 8, 16, 24, 32, 64 ports. Custom configurations made to order.

Management Software NMS3-EPSM EPON Provisioning and Service Management software. NMS3-EPSM software is required to configure customer service level agreements with upstream/downstream rate limiting, priorities and VLANs in EPON systems. NMS3-Enterprise-II Enterprise management software for larger networks. NMS3-Enterprise-II software is optional for the management of larger networks. The software features network mapping, schematics, alarm handling and a host of other features to enable networks to run smoothly. (Refer to separate product datasheets for details.)