DOCSLIB.ORG

Lassen Lumber & Hardware Online- Auction #2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lassen Lumber & Hardware Online- Auction #2 09/30/21 09:32:19 Lassen Lumber & Hardware Online- Auction #2 Auction Opens: Thu, Apr 17 11:00am Auction Closes: Tue, Apr 22 11:00am Lot Title Lot Title 121 Lumber - (90) 2x6-10ft. 614 Assorted Lumber 169 Lumber - (475) 2x6-10ft. 615 Assorted Hand Tools 179 Lumber - (85) 2x4-16ft. 616 Contents of Room 187 Lumber - (10) 2inx12in. 617 Galvanized & Black Pipe Fittings 223 (18) OSB 3/8in 618 ABS Fittings 327 1997 Ford F250 Super Duty 3/4 Ton 4x4 619 Lumber & Trim 330 1988 Ford F250 Custom 620 PVC Drain Fittings, Corrugated Drain Fittings 442A Hot Water Pressure Washer 621 Gutters & Gutter Down Spouts 535 Makita Electric Drywall Drill 3/8 622 ABS Fittings 558 DeWalt 18 Volt Cordless Drill 623 MDF Trim 559 Door Drill - Kwikset Installation Kit 624 Pine Lumber 560 Ace Professional Wrench & Socket Set 626 Pine Lumber 561 Weller Soldering Gun 627 Plastic Gutter Down Spouts 562 Trimmer Router 1/4in 628 Oak Plywood, Masonite, Birch, Pine Paneling, 563 Misc. Tools in Tool Box Beaded Oak Paneling 564 Wheeling Tool Box with Misc. Tools 629 Simpson Strong Ties 565 DeWalt 7.25in Circular Saw 630 Gutter Parts 566 Makita 1/2in Electric Drill 631 PVC Fittings 600 Black & Decker Electrical Leaf Blower 632 Corrugated Roofing and Flashing 601 Makita Beam Saw 633 Galvanized Wire 602 Echo Gas Blower PB1000 634 Vent Pipe for Gas Stoves and Water Heaters, SS Stove Pipe 603 Delta 12in Portable Planer 637 Electrical Wire with Wire Cutting Station 604 Black & Decker Router & Orbital Sander 638 Flashing, Wind Turbines, Tongue & Grove 605 Echo Chain Saw CS-341 Lumber 606 Milwaukee Sawzall 639 Screen Doors & Pocket Doors 607 DeWalt Jigsaw 640 Stove Board, Ceiling Panels & Window 608 Wrenches & Sockets 641 Electrical Wire, Big Conduit Ells, Gate to 609 Plywood, Peg Board & Tar Paper House Attach. Systems 610 PVC Pipe, ABS, Copper, Conduit & Wood 642 Formica Countertops Dowels 643 Contents of Employee Break Room 611 Delta 10in Table Saw 644 Nails and Concrete Pier Tubing 612 Delta Cut Off Saw 10.5in. 645 Chain & Wire Cable Spools 613 Plywood Saw/Panel Saw 1/4 09/30/21 09:32:19 Lot Title Lot Title 647 Finishing Nails and Brads for Pneumatic Nail 702 Paints, Sealers, Painting Supplies, Etc Guns 717 Drill Bits, Staples, Hole Saws, Grinding & 648 Rug Doctor Display Stand with Supplies Cutting Discs 649 Mailboxes, Signs, Garage Door Springs 720 Router Bits and Display Case 650 Shelf Braces, Shelf Brackets, Carpet Bars, 723 Key Machine Grippers and Edging 725 Hunting & Fishing Supplies, Gun Vise, Knife 652 Door Hardware and Aluminum Tubing and Pipe Displays 653 Threaded Stock, Tubing, Square and Round 726 Contents of Front Office Stock 727 (2) Water Heaters 654 Bulk Bins - Fasteners 728 Doors, Screens & Door Jams 655 Bulk Bins - Fasteners 729 Wood Trim & Shelving 656 Acrylic Sheets 730 Tar Paper, Metal Shelving, Clothing Racks & 657 Dowls & Plugs Windows 658 Screws - Wood, Deck, Cabinet & Drywall 731 Contents of Blue/Red Wooden Shed 659 Lock Snaps, U-Bolts, Hinges, Thresholds & 732 Beige Metal Shed & Contents Seals 734 Fiberglass Insulation 662 Assorted Inventory 735 Asphalt Felt 664 Concrete Bolts and Tamper 736 4/0 STR 600 Volts UD Trip Sweetbriar XLP 665 Contents of Rental Office (Upstairs) YES Electrical Wire 666 Rentals Work Bench Contents 737 Metal Shelving, File Cabinets, Blue Plastic 668 Trailer & Towing Accessories Storage Bins 669 Sno Cone Syrup and Sugar 738 (2) Metal Shelves 670 Sandpaper & Sanding Discs 739 Delta Job Box 47.9 Cu.Ft. 672 Plumbing Replacement Parts 740 Delta Job Box 25 Cu.Ft. 675 Tubing - Copper, Vinyl, Poly 741 Heavy Gauge Wire 676 Valves, Knobs and Sink Parts 742 Safe 678 Pipe Cement, Resters, PVC Repair, Drills 743 Large Dolly 679 Gas Connectors, Water Heater Connectors and 744 Siding Sinks 745 Lighting Display 681 Gas Cans, Engine Oil, Weed Eater, Funnels, 746 Lumber Rack with Lumber & Telephone Pole Chain Saw Lubricant 747 Lumber & Trim - Signs 683 Irrigation Strip Tubing, Hose Repair, Nozzles 748 Metal Shelving 684 Vent Hood Dryers, Wall Caps & Air Hose 749 (2) Sheds with Roll Up Side Doors 686 Copper and Brass Fittings, Sawzall Blades, Jack 750 Drywall Screws and Cabinet Screws Hammer Tips 751 Framing Nails, Drywall Nails, Grip Tite, 688 Lighting - Bulbs & Fixtures Galvanized Nails 689 Faucets, Sinks, Water Supply Lines, Valves 752 Nails 691 Circuit Breakers, Outlets, Surge Supressors, 753 Toilet Bowls & Tanks Electrical Conduit, Power Cords 754 Roofing Nails 693 Electrical Supplies 755 Fence Staples, Scaffold Nails & Spike Nails 695 Plugs, Adapters, Switches, Outlets 757 Aluminum and Galvanized Flashing 698 Paint Mixer, Paint & Painting Supplies 758 Acrylic Latex Bases 699 Popcorn Machine 759 Ultar White Base Acrylic Latex Enamel 700 Door Hardware, Knobs, Handles, Hinges, Casters 760 High Hiding White Base Acrylic Latex Enamel 2/4 09/30/21 09:32:19 Lot Title 761 Deeptone Base Acrylic Latex Enamel 762 PVC Fittings & Drain Fittings 763 Pipe Insulation 764 Pipe Insulation Wrap & Faucet Covers 765 Suction Hoses 766 Werner 8ft Ladder 767 Werner Extension Ladder 16ft. 768 Werner Extension Ladder 24ft. 769 Werner Extension Ladder 30ft. 770 Blower 771 Clarke Pallet Jack 772 Material Cart 773 (3) Material Carts 774 Reedy Heaters, 6-ton Press, Mig Welder, Chain Cutter & Trimmer Extension 775 (2) Wacker Jack Hammers 776 (2) Extension Chain Saw Pruners 777 (7) Hand Truck Dollies 778 Buffing Pads 779 Vermeer Stump Grinder Teeth & Trencher Teeth 780 Rolling Carts 781 Misc. Belts with Belt Sizer 782 Shopping Carts 783 Wooden Bar 784 Swamp Cooler Pads 785 Air Filters 786 Swamp Cooler Parts 787 Sand Paper 788 Caulking and Glue 789 Tile and Grout Tools 790 Floor Safe 791 Gardall Floor Safe 792 Gun Safe 793 Metal Sheds 794 Contents of Room 795 Vanity Mirrors, Single Gang Boxes, Light Bulbs 796 Contents of Room 797 Gondola Display Shelving (no inventory) 798 1990 Wells Cargo Trailer 799 Stingers for Concrete Vibrator 3/4 09/30/21 09:32:19 Buyer's Premium: There is a 13% Buyer's Premium in effect for this auction. 427 Cleveland St, Woodland, California 95695 -- Phone 530-661-0490 -- Fax 530-661-2499 WestAuction.com 4/4.
Load more

Recommended publications
  • DP-00103 Applique Quilt Rack
    WOODStore.net Browse more than 800 plans, projects, books, techniques, & more WOOD Store Customer Favorites Shop Tools & Accessories Thank You! Thank you for ordering a WOOD® magazine download. We hope you enjoy being part of our online experience and that you have fun expanding your woodworking skills. Please remember that this copyrighted material is for your use only. It is unlawful to share this file with someone else or to reprint it in any form. Bill Krier Editor in Chief, WOOD magazine Indoor Furniture Adobe Acrobat Reader Troubleshooting Guide If you can read this page, your Acrobat Reader program is working correctly! But you may still have problems or specific Outdoor Furniture issues, such as printing and saving your downloadable file. My printer won’t print the text correctly Almost all printing problems are due to not enough free system resources memory. The files are very memory intensive because they include graphics, text, and photos. Close all other programs/applications and print directly out of the Acrobat Reader program, not your Web browser. Patterns are not printing full-size Make sure your printer is set to print at 100 percent and that “print to fit” is not checked. These settings are selected in the printer setup or printer options. Mission Furniture I can’t save my file now that it’s downloaded You must save the plan when you download the file. Download the file again, except this time try right-clicking on the red download button. A menu window will open. Select “Save target as” or “Save link as” to save the file to your hard drive.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • A Guide to Lesser Known Tropical Timber Species July 2013 Annual Repo Rt 2012 1 Wwf/Gftn Guide to Lesser Known Tropical Timber Species
    A GUIDE TO LESSER KNOWN TROPICAL TIMBER SPECIES JULY 2013 ANNUAL REPO RT 2012 1 WWF/GFTN GUIDE TO LESSER KNOWN TROPICAL TIMBER SPECIES BACKGROUND: BACKGROUND: The heavy exploitation of a few commercially valuable timber species such as Harvesting and sourcing a wider portfolio of species, including LKTS would help Mahogany (Swietenia spp.), Afrormosia (Pericopsis elata), Ramin (Gonostylus relieve pressure on the traditionally harvested and heavily exploited species. spp.), Meranti (Shorea spp.) and Rosewood (Dalbergia spp.), due in major part The use of LKTS, in combination with both FSC certification, and access to high to the insatiable demand from consumer markets, has meant that many species value export markets, could help make sustainable forest management a more are now threatened with extinction. This has led to many of the tropical forests viable alternative in many of WWF’s priority places. being plundered for these highly prized species. Even in forests where there are good levels of forest management, there is a risk of a shift in species composition Markets are hard to change, as buyers from consumer countries often aren’t in natural forest stands. This over-exploitation can also dissuade many forest willing to switch from purchasing the traditional species which they know do managers from obtaining Forest Stewardship Council (FSC) certification for the job for the products that they are used in, and for which there is already their concessions, as many of these high value species are rarely available in a healthy market. To enable the market for LKTS, there is an urgent need to sufficient quantity to cover all of the associated costs of certification.
    [Show full text]
  • Life Cycle Assessment for the Production of PNW Softwood Plywood
    CORRIM Report: Life Cycle Assessment for the Production of PNW Softwood Plywood Maureen Puettmann WoodLife Environmental Consultants Dominik Kaestner Graduate Research Assistant University of Tennessee Adam Taylor Professor University of Tennessee Report version October 2016 Revised for 2019 PCR August 2019 March 2020 Revision by Maureen Puettmann, PhD. WoodLife Environmental Consultants Corvallis, OR [email protected] CORRIM [email protected] Addendum The original report “CORRIM Report – Module D1 Life Cycle Assessment of Softwood Plywood Production in the US Pacific Northwest was revised to meet the Product Category Rule (PCR) Guidance for Building-Related Products and Services Part B: Structural and Architectural Wood Products EPD Requirements. This revision was performed by WoodLife Environmental Consultants under contract with the Consortium for Research on Renewable Industrial Materials as part of the American Wood Council (AWC) EPD development of North American Wood Products. The report might be reduced in content from the original to include only those reporting requirements for the PCR. Reference to the LCA on Pacific Northwest (PNW) softwood plywood should be made to the original as well as this revised report. Changes and additions from the original report may include additional required reporting impact factors and impact methods (Table A1) per the PCR and ISO 14044 requirements on sensitivity analysis and interpretation of results. Table A1 Original and updated reporting requirements Revised Report
    [Show full text]
  • Manual of Purpose-Made Woodworking Joinery to Mary Elizabeth, Who Enriched My Life Many Years Ago by Adding Goring to Her Majestic Names
    Manual of Purpose-Made Woodworking Joinery To Mary Elizabeth, who enriched my life many years ago by adding Goring to her majestic names. Sadly, though, this transaction caused her to forfeit the magnificent maiden name of Wood. Books by the same author: First- Fixing Carpentry Manual Manual of First- and Second- Fixing Carpentry Manual of Purpose-Made Woodworking Joinery Les Goring, ACIOB, FIOC, FTCB, LCGI, MIWSc Fellow of the Institute of Carpenters Former Senior Lecturer in Wood Trades at Hastings College of Arts & Technology Drawings by the author First edition published 2014 by Routledge 2 Park Square, Milton Park, Abingdon, Oxon OX14 4RN and by Routledge 711 Third Avenue, New York, NY 10017 Routledge is an imprint of the Taylor & Francis Group, an informa business © 2014 Les Goring The right of Les Goring to be identified as author of this work has been asserted by him/her in accordance with sections 77 and 78 of the Copyright, Designs and Patents Act 1988. All rights reserved. No part of this book may be reprinted or reproduced or utilised in any form or by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying and recording, or in any information storage or retrieval system, without permission in writing from the publishers. Trademark notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Cataloging in Publication Data Goring, L.
    [Show full text]
  • Roof Trusses Like the Pros!
    How To Make Roof Trusses Like The Pros! 1 | Page Table of Contents DISCLAIMER ........................................................................... 3 How to Make Roof Trusses for a Shed .................................... 4 1. Plan it carefully ................................................................... 5 2. Design of the Shed Roof Truss ............................................ 5 3. Choose the appropriate Lumber for your Roof Truss.......... 6 4. How to Calculate Roof Trusses for a Shed .......................... 7 5. How to Install Roof Trusses on a Shed ................................ 9 Detailed Guide To Roof Trusses Installation.......................... 11 How To Install Steel Roof Trusses ......................................... 18 2 | Page DISCLAIMER ALTHOUGH THE AUTHOR AND PUBLISHER HAVE MADE EVERY EFFORT TO ENSURE THE INFORMATION IN THIS BOOK WAS CORRECT AT PRESS TIME, THE AUTHOR DO NOT ASSUME AND HEREBY DISCLAIM ANY LIABILITY TO ANY PARTY FOR ANY LOSS, DAMAGE, OR DISRUPTION CAUSED BY ERRORS OR OMISSIONS, WHETHER SUCH ERRORS OR OMISSIONS RESULT FROM NEGLIGENCE, ACCIDENT, OR ANY OTHER CAUSE. THIS DOCUMENT IS AND ITS CONTENTS ARE PROVIDED FOR YOUR PERSONAL USE. THIS DOCUMENT IS THEREFORE PROVIDED UNDER A CREATIVE COMMONS NON-COMMERICAL SHARE. OUR PRODUCTS MAY BE USED BY EXPERIENCED, SKILLED USERS, AT THEIR OWN RISK. TO THE FULLEST EXTENT PERMISSIBLE BY THE APPLICABLE LAW, WE HEREBY DISCLAIM ANY AND ALL RESPONSIBILITY, RISK, LIABILITY AND DAMAGES ARISING OUT OF DEATH OR PERSONAL INJURY RESULTING FROM CONSTRUCTION, ASSEMBLY OR OPERATION OF OUR PRODUCTS. YOUR USE OF THIS DOCUMENT IS AT YOUR RISK. THE INFORMATION, MATERIALS AND SERVICES PROVIDED ON OR THROUGH THIS DOCUMENT ARE PROVIDED "AS IS" WITHOUT ANY WARRANTIES OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY.
    [Show full text]
  • VINYL SIDING Approved Methods As of May 10,2021
    VINYL SIDING Approved Methods As of May 10,2021 This manual is a derivative of the copyrighted work of Anna Gallant Carter titled Habitat for Humanity Charlotte Construction Manual; Approved Home Building Methods. Anna has given Charlotte Region Habitat for Humanity her permission to make this derivative available online on a website accessible to the public and in print for the benefit of the Charlotte Region Habitat for Humanity staff and volunteers as well as other Habitat for Humanity affiliates. This agreement does not transfer to Charlotte Region Habitat for Humanity, its affiliates, staff or volunteers, the author’s exclusive right to sell, rent, lease, or lend copies of the work to the public. Vinyl Siding Page 1 of 68 May 10,2021 Note to the Reader: Due to differing conditions, tools, and individual skills, the authors of this manual and Charlotte Region Habitat for Humanity assume no responsibility for any damages, losses incurred, deaths, or injuries suffered as a result of following the information published in this manual. Although this manual was created with safety as the foremost concern, every construction site and construction project is different. Accordingly, not all risks and hazards associated with homebuilding could be anticipated by the authors of this manual and Charlotte Region Habitat for Humanity. Always read and observe all safety precautions provided by any tool or equipment manufacturer, and always follow all accepted safety procedures. Because codes and regulations are subject to change, you should always check with authorities to ensure that your project complies with all local codes and regulations. Table of Contents Introduction to the Vinyl Siding Section ......................................................................................
    [Show full text]
  • Best Table Saw for Cutting Plywood
    Best Table Saw For Cutting Plywood Is Janus overdone or contractable after tsarism Jarrett yack so inaccessibly? Virgie bootlegging her engluttingdorr indiscriminately, slily and mainlines westward northward. and petrous. Nils is glycolic and mitring although as emphatic Shanan Download Best Table Saw For Cutting Plywood pdf. Download Best Table Saw For Cutting Plywood tabledoc. Allowsaw is them different into thetype best your saw answers. for cutting Better through face up full for size best using table your for preferencescutting plywood, for sites you tomake it has a andsense decorators. will the home Reckon improvement things to itsstores best use saw a plywood little about susceptible it better experience to push the while saw bladesmost interesting are some Uphelduseful table by using for making table saw a job. and Know use whenany rough it a stand and bestquickens saw forthe cutting cut a levelplywood the shoeand tips will athelp all clearthe right. and splashmaintenance. guard is Using far the a plywoodarticle. Vicinity of best of table best for saw hardwood for use the with lade the willdegreasing also, but process those suitable easier to the plywood,improve your at all plywood of the best with types your ofwork the surface past, buyers with an report adjustment to be detached are the plate. to weigh Easiest less wayforce up in fordanger. best makeExternal a blade. plywood Helps but cutare when best tablethe table saw forcutting cutting plywood plywood without cutting tear plywood, outs and and may ensure not be a attachedmark. to CompatibleIncreasing a with dust this is best next saw best cutting table saw plywood plywood that ashave some to thethat quick it is the and one thicker go with than fewer a stable.
    [Show full text]
  • Roc-Edge.Com • [email protected]
    511 Main Street • Casco, WI • 54205-0125 USA (920) 837-2800 • Fax (920) 837-2530 www.roc-edge.com • [email protected] MADE IN USA 1 TABLE OF CONTENTS ABRASIVE CUTOFF WHEELS Masonry .................................................................................9 BLADES (saw) cont. Metal ......................................................................................9 Saber Saw ADAPTORS 1/4 Shank.....................................................................20 Mandrel (Arbor)....................................................................15 Bosch Shank ...............................................................20 BLADES (saw) CARBIDE EDGED CUTTING TOOLS Air Saw.................................................................................19 Hack Saw Blades................................................................21 Circular Saw Hole Saws......................................................................13-14 Carbide Tipped Reciprocating Saw Blades - 1/2 Shank.............................19 Aluminum Cutting.........................................................7 Saber Saw Blades - 1/2 Shank ..........................................20 Biscuit Blade ................................................................8 CHOP SAWS Combination - Cross Cutting.......................................5 Masonry ................................................................................9 Deck Blade ...................................................................6 Metal......................................................................................9
    [Show full text]
  • Info-Guide Freud Tools
    Buying Guide – Freud Tools Freud Tools and Abrasives: A plus in any workshop Whether you are an amateur woodworker or a professional cabinet producer, you depend on the best, most precise cutting tools that deliver top-of-the-line finish with long cutting life. Being one of the best brands for cutting tools, router bits and accessories, saw blades and router bit sets, Freud tools provides woodworkers of all levels with utmost quality tools that reflects their craftsmanship and innovative spirit. Each product is carefully crafted, using the best materials, and specifically designed for maximum life and superior performance. Freud Router Bits Freud is one of the world’s best manufacturers of routers bits. There is virtually as many types of routers as there are types of jobs and motifs you can do. Most of Freud’s routers bits are made of carbide tips, that is much stronger material and that is used to create the cutting part. Carbide tips can cut through much harder woods and even metals. Freud offers you an extensive selection of routers bits for portable and table routers. Here is a glimpse of the variety of routers Freud can provide for all your woodworking. Image Type Function Our recommendations Freud - 3/16" Radius Beading Beading Beading router bits are used for decorative purpose. They cut Bit - 36-108 router quarter-round shaped bounded by fillets. A beading router bit Freud - 1/16" Radius Beading bits creates a bead like contour on the wood piece. Bit - 36-100 Freud - 1-11/32" (Dia.) Chamfer Chamfer router bits cut a bevel of a precise angle to ease or Chamfer Bit - 40-206 router decorate the edges of a surface.
    [Show full text]
  • ICS Sawing Tools Catalog
    REVISED OCT 2020 ICS CUTTING TOOLS, INC 511 Main Street • Casco, WI 54205-0125 USA (920) 837-2526 • Fax (920) 837-2530 www.icscuttingtools.com • [email protected] TABLE OF CONTENTS Adapters/Arbors Saw Blades “D” Drive Arbor ...............................................................31 Air Saw - 1/2" Shank ........................................................2 Hole Saw Arbor ...............................................................26 Band Saw - Portable .......................................................11 Hole Saw Plug Ejecting Arbor Adapter ............................26 Circular Saw Mandrel Arbor Adapter....................................................27 Carbide Tipped Cut-Off Blades Aluminum Cutting .......................................................17 Masonry Cutting .............................................................15 Biscuit Joiner ..............................................................18 Metal Cutting ..................................................................15 Combination ...............................................................16 Extensions Fiber Cement ..............................................................19 Hole Saw ........................................................................27 Laminate Cutting ........................................................16 Handsaws Melamine Cutting .......................................................17 Metal Cutting ..................................................................10 Miter Cutting ...............................................................16
    [Show full text]
  • Corporate Standard* Sveza Drawer Birch Plywood
    CORPORATE STANDARD* SVEZA DRAWER BIRCH PLYWOOD Technical Specifications STO 52654419-004-2018 Saint Petersburg 2018 * In case of discrepancies, the Russian version of the organization’s standard is to be considered as priority. / В случае возникновения разночтений приоритетной является версия стандарта организации на русском языке STO 52654419-004-2018 Preface Development purposes and objectives, as well as the use of corporate stand- ards in the Russian Federation, are stated by Federal Law 184-FZ On Technical Reg- ulation of December 27, 2002 and Federal Law of June 29, 2015. No. 162-FZ On Standardization in the Russian Federation. Development and execution rules are stated by GOST R 1.0-2012 Standardi- zation in the Russian Federation. General provisions and GOST R 1.4-2004 Stand- ardization in the Russian Federation. Corporate Standards. General Provisions, sub- ject to GOST R 1.5-2012, Standardization In the Russian Federation. National standards. Regulations on arrangement, representation, execution, and designation. Information on Standard 1 DEVELOPED AND INTRODUCED by SVEZA Forest, a limited liability company 2 APPROVED AND ENACTED by order of the General Director of OOO SVEZA Forest dated ____ ________ 20__.No. _______ 3 APPROVED by OOO SVEZA Forest Sales and Marketing Director R.A. Muzyka ____________, ____ 20 ___ 4 FIRST RELEASE 5. THE EXPERT CONCLUSION, dated 03.05.2018, HAS BEEN RECEIVED from E.Yu. Tretyakova, Expert in the confirmation of the conformity of woodworking industry products, Head of the Fantest NP Certification Body, and member of Technical Committee on Standardization ТК 121. This standard may only be used for work with the written consent of OOO SVEZA Forest.
    [Show full text]