DOCSLIB.ORG

Facom Tools Lifetime Warranty

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Facom Tools Lifetime Warranty CATALOG OCTOBER 2021 SCREWDRIVERS, HEX KEYS & BITS CATALOG SCREWDRIVERS, HEX KEYS & BITS 1000V INSULATED SCREWDRIVERS 1000 VOLT INSULATED PROTWIST® SCREWDRIVERS FOR POZIDRIV® CROSS-HEAD SCREWS • For your safety, each screwdriver is individually tested at 10000 volts for 10 seconds at the end of the manufacturing cycle. • Round blade with 1000 Volt sheath. • Bi-material ergonomic handle resistant to impact, abrasion and chemicals. CODE ATD0X75VE ATD1X100VE ATD2X125VE ATD3X150VE PRICE € 6,60 € 7,60 € 9,74 € 13,70 INSULATED PROTWIST® SCREWDRIVER SET 1000 VOLTS For your safety, each screwdriver is individually tested at 10000 volts for 10 seconds at the end of the manufacturing cycle. CODE ATD.J5VE ATD.J8VE PRICE € 29,50 € 51,42 INSULATED PROTWIST® SCREWDRIVER SET 1000 VOLTS For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. CODE ATP.J5VE PRICE € 29,50 CATALOG SCREWDRIVERS, HEX KEYS & BITS 1000V INSULATED SCREWDRIVERS PROTWIST® 1000 VOLT INSULATED SCREWDRIVERS FOR PHILLIPS® HEAD SCREWS • For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. CODE ATP1x100TVE ATP2x125TVE PRICE € 8,77 € 11,34 PROTWIST® 1000 VOLT INSULATED SCREWDRIVERS FOR PHILLIPS® HEAD SCREWS  For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. CODE ATP0X75VE ATP1X100VE ATP2X125VE ATP3X150VE ATP4X200VE PRICE € 5,82 € 7,06 € 8,92 € 12,36 € 15,15 PROTWIST® 1000 VOLT INSULATED SCREWDRIVERS FOR SLOTTED-HEAD SCREWS • For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. CODE AT3.5X100TVE AT4X100TVE AT5.5X125TVE AT6.5X150TVE PRICE € 6,03 € 7,71 € 8,26 € 10,98 CATALOG SCREWDRIVERS, HEX KEYS & BITS 1000V INSULATED SCREWDRIVERS PROTWIST® BORNEO® SCREWDRIVERS FOR MIXED HEADS - PHILLIPS® • For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. CODE ATPB1x100TVE ATPB2x125TVE PRICE € 10,96 € 13,15 PROTWIST® SCREWDRIVERS FOR SLOTTED SCREWS 1000 VOLT INSULATED • For your safety, each screwdriver is individually tested at 10000 volts for 10 seconds at the end of the manufacturing cycle. • Round blade with 1000 Volt sheath. • Milled blade: -> 5.5 mm included. • Forged blade: 6.5 -> 12 mm. • ... CODE AT10X200VE AT12X250VE AT2.5X50VE AT2.5x75VE AT2X75VE PRICE € 14,91 € 16,16 € 4,13 € 4,26 € 4,04 CODE AT3.5x100VE AT3.5x75VE AT3X100VE AT3X75VE AT4X100VE PRICE € 4,75 € 4,51 € 5,26 € 4,47 € 6,01 CODE AT4X150VE AT5.5x125VE AT5.5x150VE AT5.5x200VE AT6.5x150VE PRICE € 6,44 € 6,71 € 6,91 € 7,22 € 8,48 CODE AT6.5x200VE AT8X150VE AT8X200VE PRICE € 9,16 € 10,84 € 11,74 SET OF 4 PROTWIST® BORNEO® SCREWDRIVERS FOR MIXED HEADS • For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. • Contains : ... CODE ATB.J4TVE PRICE € 49,15 CATALOG SCREWDRIVERS, HEX KEYS & BITS 1000V INSULATED SCREWDRIVERS SET OF 8 PROTWIST® BORNEO® SCREWDRIVERS FOR MIXED HEADS • For your safety, each screwdriver is tested individually at 10000 Volts for 10 seconds, at the end of the manufacturing cycle. • 1000 Volt sheathed round blade. • Bi-material grip resists to impacts, abrasion, and chemicals. • Contains : ... CODE ATB.J8TVE PRICE € 82,01 CATALOG SCREWDRIVERS, HEX KEYS & BITS ANGLED AND PHASE PROOFING SCREWDRIVERS ANGLED SCREWDRIVERS - FOR PHILLIPS® SCREWS • A different head at each end. • For use in confined space. • Finish: chromed. CODE APZ.A APZ.B APZ.C PRICE € 5,12 € 6,08 € 9,08 ANGLED SCREWDRIVERS - FOR SLOTTED-HEAD SCREWS • ARZ round blade. • AKZ square blade. • Two ends in two planes at 90°. • Operating by quarter turn flip. • Finish: burnt. CODE AKZ.6 AKZ.8 PRICE € 5,05 € 6,76 ANGLED SCREWDRIVERS - FOR SLOTTED-HEAD SCREWS • ARZ round blade. • AKZ square blade. • Two ends in two planes at 90°. • Operating by quarter turn flip. • Finish: burnt. CODE ARZ.4 PRICE € 4,00 LOW VOLTAGE DETECTOR SCREWDRIVERS • Safety guard width: 5 mm. • Light indicator. • Transparent handle. • Steel blade chrome- plated vanadium. • Extremity blade in hardened black phosphate. • AV.HT1C: Standard model. • AV.HT2C: Model with clasp. • VDE-GS. CODE AV.HT1C AV.HT2C PRICE € 8,20 € 5,54 CATALOG SCREWDRIVERS, HEX KEYS & BITS ANGLED AND PHASE PROOFING SCREWDRIVERS MAGNETISER - DEMAGNETISER • Magnetiser the screwdriver to hold the screw in place. • Demagnetises the screwdriver after use. Weight: 73 g. CODE 837 PRICE € 56,71 SCREW HOLDER FOR PHILLIPS® SCREWS • Bush rotation secures the blade in the screw head. • Finely knurled steel handle. • AFUX.2 is fitted with a magnet at the end of the handle. CODE AFUX.1 AFUX.2 PRICE € 17,31 € 23,49 SCREW HOLDER FOR SLOTTED-HEAD SCREWS • Bush rotation secures the blade in the screw slotted head. • Finely knurled steel handle. • AFU.2 is fitted with a magnet at the end of the handle. CODE AFU.0 AFU.1 AFU.2 PRICE € 27,79 € 16,88 € 28,09 SCREW HOLDER SCREWDRIVERS • For slotted and Phillips® head. • Screw holder and screwing with the same tool. • The guide is moved with the thumb, the spring holds the screw on the blade. CODE AFP.1 AFP.2 PRICE € 23,93 € 27,97 CATALOG SCREWDRIVERS, HEX KEYS & BITS ANGLED AND PHASE PROOFING SCREWDRIVERS SCREW HOLDER SCREWDRIVERS • For slotted and Phillips® head. • Screw holder and screwing with the same tool. • The guide is moved with the thumb, the spring holds the screw on the blade. CODE AFR.3X100 AFR.4X125 AFR.5X150 PRICE € 16,02 € 19,43 € 22,91 SCREW HOLDER SCREWDRIVERS FOR SLOTTED-HEAD SCREWS • For slotted head screws 0.5 --> 1.5 mm. • Sliding bush to lock the two angle half-blades in the screw slotted head. • Screwdriver required for susequent tightening or loosening. • Blade length: 150 mm. • Total length: 240 mm. Weight: 56 g. CODE AF PRICE € 19,81 VERY LOW VOLTAGE DETECTOR SCREWDRIVERS • For very low voltage. • 2 models: - AV.BT1: Standard model. - AV.BT2: Model with clasp. • Supplied with 50 cm wire with plug and aligator clip. CODE AV.BT1 PRICE € 10,08 CATALOG SCREWDRIVERS, HEX KEYS & BITS BIT-HOLDING SCREWDRIVERS 3 IN 1 BLADE HOLDER SET PROTWIST® • SPEED : Ratcheting feature for faster task completion. • POWER : T-handle feature to remove difficult screws. • COMPACT: Stubby screwdriver for tight areas. • Bi-material ergonomic handle for comfortable and reliable screwing. • Hi ... CODE ACL.2A2 PRICE € 90,86 3 IN 1 BLADE HOLDER: RATCHETING, T-HANDLE AND NANO SCREWDRIVER PROTWIST® • SPEED : Ratcheting feature for faster task completion. • POWER : T-handle feature to remove difficult screws. • COMPACT: Stubby screwdriver for tight areas. • Bi-material ergonomic handle for comfortable and reliable screwing. • Hi ... CODE ACL.2A PRICE € 34,43 3 IN 1 SCREWDRIVER SET - PROTWIST® - 5 PC • SPEED : Ratcheting feature for faster task completion. • POWER : T-handle feature to remove difficult screws. • COMPACT: Stubby screwdriver for tight areas. • Bi-material ergonomic handle for comfortable and reliable screwing. • Hi ... CODE ACL.2A5 PRICE € 98,46 CATALOG SCREWDRIVERS, HEX KEYS & BITS BIT-HOLDING SCREWDRIVERS AM - PROTWIST® MULTI-BLADE SCREWDRIVER SETS • Several screwing patterns in a small footprint. • Each blade has two useful tips. • bi-material ergonomic handle for comfortable and reliable screwing. • The handle drives the blades by the 6-point 1/4" drive. • A spring holds the bla ... CODE AM.3 AM.4 AMJ PRICE € 100,42 € 80,28 € 11,58 REVERSIBLE BLADES • 1/4" hexagonal reversible blade. • Length: 175 mm. • Handle out length: 125 mm. • Finish: chromed. CODE AMZ.D0-1 AMZ.D1-2 AMZ.D2-3 AMZ.E AMZ.H3 PRICE € 8,72 € 8,72 € 8,72 € 10,64 € 8,84 CODE AMZ.H4 AMZ.H5 AMZ.H6 AMZ.P1-2 AMZ.P2-3 PRICE € 8,84 € 8,84 € 9,01 € 8,72 € 8,72 CODE AMZ.TX10-15 AMZ.TX20-25 AMZ.TX30-40 AMZ.X10-15 AMZ.X20-25 PRICE € 11,77 € 11,77 € 11,77 € 10,52 € 10,52 CODE AMZ.X30-40 AMZ.X8-9 AMZ.XRP10-15 AMZ.XRP20-25 AMZ.XRP27-30 PRICE € 10,52 € 13,28 € 11,05 € 10,83 € 10,83 REVERSIBLE BLADES Feature: • 1/4" hexagonal reversible blade. • Length: 175 mm. • Handle out length: 125 mm. • Finish: chromed. CODE AMZ.P0-1 PRICE € 8,72 CATALOG SCREWDRIVERS, HEX KEYS & BITS BIT-HOLDING SCREWDRIVERS PROTWIST® BIT HOLDER SCREWDRIVER Bi-material ergonomic handle for comfortable and reliable screwing. AM.H: Snap-ring model. AM.M1: Short magnetic model. AM.M2: Long magnetic model. CODE ATM.H ATM.M1 PRICE € 8,15 € 10,72 PROTWIST® REVERSIBLE BLADE HOLDER HANDLE Bi-material ergonomic handle for comfortable and reliable screwing. Hexagonal - 1/4" drive. Diameter: 35 mm. CODE ATM.D PRICE € 11,63 PROTWIST® SD MEDIUM BIT HOLDER SD. Bi-material ergonomic handle for comfortable and reliable screwing. Protwist Screwdriver handle for added comfort. Professional Tools with Facom Tools Lifetime Warranty CODE ATM.M2 PRICE € 11,71 RADIOMODEL MULTIBLADE SCREWDRIVERS • Length with blade: 105 mm. • Supplied with 3 blades for slotted-head screws, diam. 1.5 - 2 - 2.5 mm, stored in the handle. • Finish: polished chromed. Weight: 14 g. CODE AMR PRICE € 7,68 CATALOG SCREWDRIVERS, HEX KEYS & BITS BIT-HOLDING SCREWDRIVERS SCREWDRIVERS SET PROTWIST® MULTIBLADES • SPEED : Ratcheting feature for faster task completion. • POWER : T-handle feature to remove difficult screws.
Load more

Recommended publications
  • How Do I Set the Torque on S/R Preset Torque Wrenches?
    Needed Items: • S/R preset torque wrench from the LTC, LTCR, or LTCS Series. • If LTC wrench, an SD or SDRT interchangeable head must be used. Frequently Asked Questions • S/R Combination Adjusting and Release Tool (CART Tool). • Torque Tester of +/- 1% I.V. Accuracy or better. • Veritorq, Torq-Tronics® (Used in this demonstration.) or System 4/5 How do I set Start torque tester. the torque • Allow tester to warm up. on S/R • Check tester for zero. preset torque • Set tester to use selected unit of measure. • Set tester to capture initial peak torque. wrenches? Torque Adjustment Procedure: The CART Tool has two hex keys, one inside the S/R Preset Torque Wrenches: LTC, other. The inner hex key is “T” shaped, enclosed in LTCR, and LTCS Series a vinyl cushion, and is pointed. This is the Torque Adjustment Key. It is used to adjust the torque setting. Rotating it clockwise when it is engaged with the adjustment nut increases the torque setting; rotating it counter-clockwise when it is engaged with the torque adjustment nut decreases the torque setting. The outer key is the Locking Key. It is “L” shaped and has a larger hex size. This key engages a jam nut inside the wrench to lock the torque setting in place. To adjust the torque, the nuts must first be disengaged from contact with each other. Align the CART Tool with the rear of the torque wrench as shown here. Insert the Torque Adjustment Key into the wrench as shown. The Locking Key should not yet be engaged.
    [Show full text]
  • Disassembly Assembly Quick
    Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Drive & Motor Models: 60051, 60052 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply. Open 51655 ON/OFF Valve to deplete air. Disconnect hose from air supply. Drive/Motor Disassembly: Assembly Instructions - Quick-Change Pencil Grinder Header 1. xxxxxx 1. Rotate 60083 Lever 90° to open collet. Remove insert tool from collet. Notice: If necessary, use 60116 wrench. Turn counterclockwise. 2. Remove collet insert from drive shaft. Turn conterclockwise. 3. Use a piece of rubber to protect housing and fasten in vise with aluminum or bronze jaws. Use an adjustable wrench to remove 60066 Nose Cone. Turn counterclockwise. 60081 Washer 60094 Spring 60087 Washer Seal 4. Carefully, remove 60081 Washer, 60094 Spring and 60087 Washer Seal. HEAT GUN 5. Invert tool in vise. Use a HEAT GUN to warm housing and soften thread sealant. 6. Use an adjustable pin spanner wrench to remove 60110 or 60111 Cover. Turn counterclockwise. Set cover, brake and hose assemblies aside. See: Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Bushing & Brake, to replace air bushing and/or brake. 7. Remove from vise. NOTICE: Quick-Change Chuck is SPRING LOADED! Use caution when removing 60077 Bumper. Use an adjustable wrench on 60077 Bumper, and insert 4 mm hex key into end of drive shaft. Carefully, turn bumper counterclockwise to remove from drive shaft. 8. Use a 1/4" (6 mm) Ø diameter by ~5" (~127 mm) long screw and carefully slide, 60088 Front Seal Washer, 60089 Outer Housing Seal, 60090 Inner Race Seal, 60092 Rear Seal Washer, 60093 Bearing, 60074 End Support and 60073 Springs (19 to 20) onto screw.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Specialty Tools Brake Tools
    Specialty Tools SPECIALTY TOOLS • Includes sizes T-40, T-45, T-50. • All Torxbits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, T-50 sizes BRAKE TOOLS for servicing disc brakes fitting GM and Ford brake caliper Torx bolts. • 3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm). • Available Individually: 26620 T-40 3/8" drive, 26630 T-45 3/8" drive, 26640 T-50 3/8" drive • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in Lisle Brake Caliper Torx Bit Set LST 27740 step-cut and blind-end cylinders. 240 grit stones are 1 1/8" long. Flexible driver. • # 10050 Replacement Stones • Hardened alloy steel bits. Lisle Brake Cylinder Hone LST 10000 • Professional sand finish. • Sizes: T40, T45 & T50. Performance Tool 3 Pc Brake Caliper Star Bit Set • 2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). WIL W1337 • Controlled pressure makes it possible to polish or hone with just one stone grit. Square ends of stones hone to the end in step-cut and blind-end cylinders. 240 grit stones are • Hangs the Disc Brake Caliper Out of the Way During Service While 1-1/8" long. Flexible driver. Keeping Tension Off the Brake Line. • # 10550 Replacement Stones • Helps prevent damage to calipers and lines when servicing brakes, Lisle Brake Cylinder Hone LST 10500 suspension, hubs and more. • Overall length of 9" for hanging the disc brake caliper out of the way while keeping tension off the brake line.
    [Show full text]
  • How to Use Tools / Mistakes to Avoid CARLTSOE SAFETY TOOLS
    CARLTSOE SAFETY TOOLS If you just had the right tools How to Use Tools / Mistakes to Avoid Tool Proper Uses Abuse/Misuse Nail Hammers Nail hammers are intended for driving and pulling common, Never strike one hanmmer with or against another hammer unhardened nails only, and for ripping apart wooden or a hatchet. Never strike nail pullers, steel chisels or structures. They may be used to strike nail sets with the other hardened objects with a nail hammer as the face may center of the striking face. chip, possibly resulting in eye or other serious injury. Ball Pein Hammers Ball pein hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and Strike squarely and avoid glancing blows that may cause straightening unhardened metal. the edge of the face to chip, possibly resulting in eye or When striking a struck tool (chisel or punch), the striking face other serious injury. Never strike with or against the side, of the hammer should have a diameter at least 3/8" larger or cheek, of any hammer. than the struck face of the tool. Riveting and Setting Hammers The Riveting hammer is designed for driving and spreading Never use these special-purpose hammers for general- rivets on sheet metal work. The Setting hammer is designed purpose work. The square, sharp edges of the setting for forming sharp corners, closing and peining seams and lock hammer make it vulnerable to chipping if improperly used. edges, and for use by glaziers for inserting glazier points. Never strike against other steel tools.
    [Show full text]
  • Tools for Tile & Stone Catalog
    TOOLS FOR TILE & STONE CONTRACTORS CUTTING, PROFILING & POLISHING TH Since 1986 Celebrating 35 Years Providing Better Solutions to the Professional VERSION 6 CONTACT US WELCOME Alpha Professional Tools® was founded in 1986 and has become a leading manufacturer of quality tools for professionals in the natural/engineered stone, porcelain, ceramic, glass, construction, marine and automotive industries. Alpha® provides the best products for cutting, drilling, shaping and polishing all types of materials. In addition to providing the best products in the industry, Alpha Professional Tools® offers a variety of services to support their products. Company Contact Information: Headquarters & 16 Park Drive Training Center: Franklin, NJ 07416 Hours of Operation (EST): 8:30 a.m. - 5:00 p.m. Telephone No: 201-337-3343 Toll-Free No: 800-648-7229 Fax No: 201-337-2216 Toll Free Fax No: 800-286-0114 E-mail Orders to: Contact Us: [email protected] www.alpha-tools.com [email protected] [email protected] Follow Us: Sales Contacts by Territory – [email protected] Caribbean 201-337-3343 Ohio Valley 440-364-3759 Canada 519-546-9861 Pacific 800-648-7229 International 201-337-3343 South 480-848-6808 Midwest 630-849-7105 Southeast 678-977-1147 Northeast 973-830-7681 Southern CA 925-428-1292 Northern CA 925-428-1292 TABLE OF CONTENTS TOOLS STONE CUTTER • ESC-125, Wet Stone Cutter .......................................................................................2 • Countertop Trim Kit ....................................................................................................4
    [Show full text]
  • 11 Piece STANLEY® FATMAX® Screwdriver SET 6 Piece
    STANLEY® FATMAX® SCREWDRIVERS S ■ Ergonomically designed quad-lobe handle provides more torque than traditional-style screwdrivers for less effort. C ■ High strength polypropylene handle has textured rubber grip for comfort. REWDRIVER ■ Magnetic tips help secure grip on fasteners. ■ Color-coded handles for easy tip identification. ■ Chrome plated bars resist corrosion. ■ Bars are fully ground and polished. ■ Bars are made of alloy steel and heat treated for strength and durability. S ■ Shot blasted black oxide tips provide a more precise fit and a textured surface, which provides increased grip and less cam-out when in use. 6 PIECE STANLEY® FATMAX® DIAMOND SCREWDRIVER SET Product #: FMHT62052 ■ Industrial Grade Simulated Diamond Tip Technology: Industrial Grade Simulated Diamond deposited on to screwdriver tips helps bite into screw, helping to extend tip life. ■ Longer tip life when compared to traditional STANLEY® screwdrivers. ■ Black phosphate bars provide corrosion resistance. ■ Ergonomic quad-lobe design provides maximum tip torque. ■ Color-coded handles makes choosing the right driver quick and easy. Pieces Description 6 (1) Slotted Cabinet: 3/16 x 4” (2) Flared Slotted: 1/4 x 4, 5/16 x 6” (3) Phillips: 1 x 3, 2 x 4, 3 x 6” 11 PIECE STANLEY® FATMAX® SCREWDRIVER SET Product #: 62-502 Contents Description 62-552 Screwdriver, FATMAX® Standard Slotted Stubby 1/4" x 1-3/4" 62-553 Screwdriver, FATMAX® Standard Slotted 1/4" x 4" 62-555 Screwdriver, FATMAX® Standard Slotted 5/16" x 6" 62-551 Screwdriver, FATMAX® Standard Slotted Precision Pocket 1/8" x 3" 62-554 Screwdriver, FATMAX® Cabinet Slotted 3/16" x 3" 62-556 Screwdriver, FATMAX® Phillips Precision Pocket # 0 x 2-1/4" 62-560 Screwdriver, FATMAX® Phillips Stubby # 2 x 1-3/4" 62-559 Screwdriver, FATMAX® Phillips # 1 x 3" 62-561 Screwdriver, FATMAX® Phillips # 2 x 4" 62-562 Screwdriver, FATMAX® Phillips # 3 x 6" Torx® is a trademark of Acument Intellectual Properties, LLC WARNING: WORK SAFELY WITH TOOLS.
    [Show full text]
  • Installation Instructions
    JK Hood Louver Cut Template Parts List Tools Needed (1) JK Hood Louver Panel • Scissors & sharp hobby knife or razor blade (1) Cut Template with Instructions (this sheet) • Masking tape & fine-tip felt marker Cut out template Cut out template (24) 10-24 X 3/4 SS button head cap screw • Automatic center-punch or punch and hammer along outer edge along outer edge (Step 2) (24) 10-24 nylon insert lock nut • Drill motor with 7/32” drill bit, 3/4“ & 1” hole saws (Step 2) (24) #10 flat washer • High speed cut-off wheel (electric or pneumatic) • Anti-sieze compound • 1/8“ hex key (flat-end, NOT ball-end) • 3/8” wrench or socket & ratchet • Files, sandpaper or burr-knife • Touch-up paint At these hole locations: Drill through At these hole locations: Drill through inner brace, then hole-saw nut inner brace, then hole-saw nut access hole from underside access hole from underside (Step 13) (Step 13) Existing Existing Windshield Windshield Bumper Hole Bumper Hole (Step 3) (Step 3) Drill/Hole Saw Locations (Steps 4 & 6) Inside Corner Inside Corner (Step 4 - punch/mark (Step 4 - punch/mark but do not drill) but do not drill) Cut HoodAlong Dotted Lines (Step 8) Poison Spyder Customs www.poisonspyder.com 8. Use a cut-off wheel to cut along the cut lines made in the previous step. DO (951) 849-5911 Installation Procedure NOT CUT INTO the X-brace on the underside of the hood. There is a thin layer of adhesive material between the outer sheetmetal and the X-brace, which will allow you to carefully cut through the outer layer of sheetmetal without cutting in to the X-brace.
    [Show full text]
  • Ergonomic Hand Tools Computorq3 Electronic
    SALES BLASTER NEW! RATCHETING COMBINATION WRENCHES Ratcheting gear minimizes swing arc in tight places See Page 6 IMPACT WRENCHES High power to weight ratio, fast rundown and no torque reaction to operator See Page 10 COMPUTORQ3 ERGONOMIC HAND TOOLS ELECTRONIC TORQUE WRENCH We use a scientific approach to Simple to use. Sleek new design. develop ergonomic hand tools See Pages 8 - 9 See Page 2 OFFER VALID WHILE SUPPLIES LAST APRIL 1, 2018 TO JULY 31, 2018 Trust CDI's Factory Service Center for all your CDI torque product repair and calibration work. www.cdifactoryservice.com COMPUTORQ 3 ELECTRONIC TORQUE WRENCHES HEAVY-DUTY TORQUE & ANGLETM TORQUE WRENCH LEADING THE WAY IN HEAVY-DUTY TORQUE AND ANGLE APPLICATIONS WITH The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench INNOVATIVE SOLUTIONS THAT MAKE A DIFFERENCE IN DOING THE JOB RIGHT. that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. The CDI 600 ft.lb. Heavy-Duty Torque & AngleTM Torque Wrench eliminates the need for Simply set the desired torque value and apply force until the green LED illuminates. Great for angle gauges and protractors, providing the most accurate and efficient way to achieve torque light industrial, automotive, motorcycle, watercraft and aircraft applications. plus angle tightening sequences now specified by many manufacturers. The digital readout displays a torque setting then with a push of a button, switches to the angle mode. Angle readout Product Code Description List Price: Sale Price: not affected by ratcheting. Angle calculation based on the same gyroscopic technology that 2401CI3 1/4" Drive 24-240 ft.
    [Show full text]
  • PUNCHES and CHISELS Punches and Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
    PUNCHES AND CHISELS Punches and Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. PPC250BK Punch and Chisel Set. PPC100AK Punch and Chisel Set. ncludes 24 pcs. in KB2179 kit bag: Includes 10 pcs. in KB2175 kit bag: PPC1A PPC106A PPC205A PPC820B PPC812B PPC828B PPC15B PPC3A PPC108A PPC206A PPC824B PPC816B PPC12B PPC19B PPC250BK PPC4A PPC110A PPC208A PPC12B PPC820B PPC13B PPC103A PPC112 PPC210A PPC14B PPC824B PPC14B PPC104A PPC203A PPC812B PPC15B PPC100AK PPC105A PPC204A PPC816B PPC19B PPCD70BK Punch and Chisel Set. PPC210BK Punch and Chisel Set. Includes 7 pcs. in KB2183 kit bag: Includes 22 pcs. in KB2178 kit bag: PPC103A PPC106A PPC110A PPC1A PPC105A PPC204A PPC816B PPC104A PPC107A PPC5A PPC106A PPC205A PPC820B PPC105A PPC108A PPC3A PPC108A PPC206A PPC824B PPC210BK PPC4A PPC110A PPC208A PPC828B PPC103A PPC112 PPC210A PPCD70BK PPC104A PPC203A PPC812B PPCS60BK Punch and Chisel Set. Includes 6 pcs. in KB2185 kit bag: PPC715BK Punch and Chisel Set. PPC203A PPC205A PPC208A Includes 16 pcs. in KB2182 kit bag: PPC204A PPC206A PPC210A PPC1A PPC104A PPC203A PPC208A PPC3A PPC105A PPC204A PPC812B PPC4A PPC106A PPC205A PPC816B PPC715BK PPC103A PPC108A PPC206A PPC820B PPCS60BK PPC50AK Punch and Chisel Set.
    [Show full text]
  • Projected Tool List
    The Vancouver Tool Library - Projected Tool List Tool Category Tool Tool Category Tool Awl Brick and Jointing Tools Chalk line Bull Float draw knife bull float handles, 6 ft flatbar cement finishing tools hammers (various) darby trowels, edgers, groovers, level (various) cement mixer, electric mallet, rubber cement mixing box miter box chisels: brick, cold, bull point nail puller concrete tamper (jitterbug) Concrete and Masonry nail set sledge hammer planes, various saw, tile (wetsaw) plum bob Grinder plybars, various Grout Float, various rasp, wood mortar hoe router table mortar mixing box router rebar cutter / bender Carpentry and saw, hand crosscut rotary hammer Woodworking saw horses x2 rotary hammer bits speed square pipe clamps, 2'-8' screwdriver set spring clamps squares, various c-clamps, various Clamps stud finder hand-screw tape measure, various vice-grips utility knife corner-clamps wood chisels, various Box cable cutter Screw gun circuit tester Electricians drill extension cords, <50' angle grinder, Electrical extension cords, >50' random orbital sander soldering iron saw, circular (skilsaw) wire stripper saw, power miter (chop) Multimeter saw, reciprocating (sawzall) saw, saber (jigsaw) saw, table The Vancouver Tool Library - Projected Tool List Caulking gun Bow saw drywall mud knives, various digging bar, various drywall corner knife posthole digger drywall hand sander garden trowel drywall pole sander hedgeshear, manual drywall T-square hedgetrimmer, electric Floor and Wall floor and roof scraper hoe, planters heat gun
    [Show full text]
  • Big Help Out!
    FLOOR COVERING TOOLS BIG HELP OUT! NO. 280 AIR LIFTER NEW LONGER AIR PLATES HELP KEEP LOADS LEVEL! 2018 CATALOG Corners No. 575 Multi-Undercut Saw This versatile saw undercuts along walls, door jambs, under toe spaces, and will also undercut inside corners. The height of cut is easily adjustable from flush to one inch above the floor. The large, flat base prevents tipping and assures accurate, level cutting. The dual-angle depth gauge allows undercutting at a “straight-on” or a 45° an- gle. The visual scale provides precision depth control at 1 No. 575 Toe-Spaces /8" increments. Each saw comes with a 36-tooth No. 556 Carbide Blade. The blade is bell-shaped for added rigidity and should not be used on any other saw. Also comes with custom molded carrying case, a hex key for blade removal, and detailed instructions. Order No. Description Volts Amps. Weight 575 Multi-Undercut Saw 120 6.2 11 lbs. 556 Carbide Blade (36 tooth) --- --- 6 oz. No. 812 Super Saw FULLY UNDERCUTS INSIDE The Super Saw provides the most powerful motor of any 1 CORNER AREAS undercut saw available. The 13 AMP motor and 6 /2" di- HEIGHT COMES WITH CASE, CARBIDE BLADE, AND ameter flush-cutting blade can fully undercut the inside ADJUSTMENT UNDERCUTS DOORS AS MASONRY BLADE corner even in extremely tight areas. Doors as thick as 3 THICK AS 1¾" WITHOUT 1 /4" can be undercut without removal. Blade height is 1 REMOVAL adjustable from a flush cut to a maximum of 1 /4" off the floor.
    [Show full text]