Technical Meeting and Exhibition
MS&T20 VIRTUAL NOVEMBER 2-6, 2020
PRELIMINARY TECHNICAL PROGRAM
The content in this preliminary program was generated on October 20, 2020. However, changes are still being implemented for the technical program. Please refer to the online session sheets for the most up-to-date information.
The Minerals, Metals & Materials Society Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Topic Area/Symposium Page
Additive Manufacturing Additive Manufacturing Modeling and Simulation: AM Materials, Processes, and Mechanics Additive Manufacturing Modeling and Simulation - Machine Learning, Design and Optimization 36 Additive Manufacturing Modeling and Simulation - Microstructure Evolution 13 Additive Manufacturing Modeling and Simulation - Online Process Monitoring, Non-mechanical Property 45 Characterization Additive Manufacturing Modeling and Simulation - Residual Stress, Fatigue Property, and Thermal 25 Property Poster Session 69 Additive Manufacturing of Ceramic-based Materials: Process Development, Materials, Process Optimization and Applications Additive Manufacturing of Ceramic-based Materials Process Development, Materials, Process 13 Optimization and Applications I Additive Manufacturing of Ceramic-based Materials: Process Development, Materials, Process 26 Optimization and Applications II Poster Session 69 Additive Manufacturing of Ceramics and Ceramic Composites: Materials Properties, Processes, and Modeling Additive Manufacturing of Ceramics and Ceramic Composites: Materials Properties, Processes, and 45 Modeling Additive Manufacturing of Metals: Complex Microstructures and Architecture Design Microstructure and Mechanics in Metal AM 36 Microstructure Characterization and Novel Materials 61 Microstructure Evolution and Control 45 Microstructure Evolution in Structural Metals 53 Additive Manufacturing: Alloy Design to Develop New Feedstock Materials Session I 46 Session II 54 Session III 62 Additive Manufacturing: Equipment, Instrumentation and Measurement Session I 14 Session II 26 Session III 37 Additive Manufacturing: Materials, Alloy Development, Microstructure and Properties Additive Manufacturing of 316L 37 Additive Manufacturing of Al- and Ti-based Alloys 46 Additive Manufacturing of Fe-based Alloys 54 Additive Manufacturing of Metallic Materials (Cu, Co, Mo, and Ni) 14
2 PROGRAM At A Glance
Topic Area/Symposium Page
Additive Manufacturing of Other Miscellaneous Materials 62 Additive Manufacturing Process Control and Optimization 26 Additive Manufacturing: Mechanical Behavior of Lattice Structures Produced via AM Additive Manufacturing of Lattices - Session I 15 Additive Manufacturing of Lattices - Session II 26 Additive Manufacturing of Lattices - Session III 37 Additive Manufacturing: Microstructure and Material Properties of Titanium-based Materials Modeling and Properties 54 Titanium Alloy Microstructure and Properties 46 Additive Manufacturing: Qualification and Certification Approaches and Challenges 15 Microstructure and Properties 27 Poster Session 69 Process and Control 37 Multi-material Additive Manufacturing: Processing and Heterogeneous Materials Design AM of Functionally Graded & Dissimilar Materials 60 Innovative AM Approaches for Multi-functions 52 Recent Progress in Multi-Material AM 64 Naval/Maritime Applications of Additively Manufactured Parts: Design and Experimental Approaches Naval/Maritime Applications of Additively Manufactured Parts: Design and Experimental Approaches 43 Phase Transformations in Additively Manufactured Materials Additive Manufacturing - Phase Transformations - In-situ and Ex-situ Experimental Work 23 Additive Manufacturing - Phase Transformations - Modelling 34 Artificial Intelligence AI for Big Data Problems in Imaging, Modeling and Synthesis AI-accelerated Materials Discovery and Synthesis 48 AI-enabled Materials Characterization 57 Artificial Intelligence for Materials Design and Process Optimization AI for Materials Design and Process Optimization 16 Machine Learning for Discovery of Structure-Process-Property Relations in Electronic Materials Machine Learning in Materials Engineering I 21 Machine Learning in Materials Engineering II 32
3 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Topic Area/Symposium Page
Materials Design through AI Composition and Process Optimization Poster Session 67 Session I 32 Session II 42 Materials Informatics and Modeling for 21st Century Ceramics Research Machine Learning for Materials Microstructure and Property Predictions 43 Materials Informatics for Images and Multi-dimensional Datasets Session I 33 Poster Session 67 Joint Session: "Materials Informatics for Images and Multi-dimensional Datasets" and "Materials 52 Informatics and Modeling for 21st Century Ceramics Research” Biomaterials Next Generation Biomaterials Next Generation Biomaterials I 22 Next Generation Biomaterials II 33 Next Generation Biomaterials III 44 Next Generation Biomaterials IV 52 Poster Session 68 Surface Treatments and Properties of Titanium and Titanium Alloys: A Forum on New Strategies and Processes for Biomedical and Industrial Advanced Applications Surface Treatments and Properties of Titanium and Titanium Alloys 53 Ceramic and Glass Materials ACerS-ECerS Joint Symposium - Emerging Ceramic Technologies; Challenges and Future Prospects Emerging Ceramic Technologies I 12 Emerging Ceramic Technologies II 25 Ceramic and Crystal Materials for Optics and Photonics Poster Session 65 Session I 49 Session II 57 Ceramic Matrix Composites CMC I 16 CMC II: Foreign Object Damage/NDE 29 Ceramics and Glasses Simulations and Machine Learning Atomistic Modeling 29 Machine Learning and Artificial Intelligence 16 Poster Session 65
4 PROGRAM At A Glance
Topic Area/Symposium Page
Engineering Ceramics: Microstructures, Properties, and Applications Microstructure and Properties of Engineering Ceramics 18 Glasses, Optical Materials, and their Functional Applications: Current Issues in Science & Technology ACerS GOMD Alfred R. Cooper Award Session 41 Advanced Characterizations and Functional Applications 30 Structure, Dynamics and Surface Reactivity of Glass Materials 19 Innovations in Refractory Ceramic Technology for Iron and Steel Applications Innovations in Refractory Ceramic Technology for Iron and Steel Applications 31 Manufacturing and Processing of Advanced Ceramic Materials New Opportunities in Ceramic Processing I 42 New Opportunities in Ceramic Processing II 51 Processing of Carbides, Borides, and Chlorides 63 Processing of Oxide Ceramics 59 Electronic and Magnetic Materials Advances in Dielectric Materials and Electronic Devices Dielectrics and Piezoelectrics: Session I Synthesis and Growth 39 Dielectrics and Piezoelectrics: Session II Modeling and Applications 56 Ferroics, Multiferroics, & Electronics 48 Poster Session 65 Functional Defects in Electroceramic Materials Defect Design for Energy Storage Materials 30 Defect Engineering in Functional Ceramics 19 Poster Session 66 Energy Advanced Characterization of Materials for Nuclear, Radiation, and Extreme Environments Fusion Materials & In-Situ Ion Irradiation 38 Materials Mechanics & Environmental Degradation 55 Novel Techniques 27 Poster Session 70 Radiation Effects & Materials Mechanics 47 Ceramics in the Nuclear Fuel Cycle Ceramics in the Nuclear Materials 39 Waste Form Development 49
5 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Topic Area/Symposium Page
Fundamentals and Characterization Bulk and Sheet Thermal-Deformation Processing and Microstructure Development in Metals – Characterization, Experiments and Modeling Session I 28 Session II 39 Emergent Materials under Extremes and Decisive In Situ Characterizations Decisive In-situ Characterizations 58 Pressure-induced dramatic changes in structures and properties 49 Engineered Phase Transformations Engineered Phase Transformations 18 Grain Boundaries, Interfaces, and Surfaces in Functional Materials: Fundamental Structure-Property- Performance Relationships Interface Anisotropy and Interfaces in Ferroelectric/Functional Oxides 58 Kinetic Processes and Interface Transitions 50 Poster Session 66 High Entropy Materials: Concentrated Solid Solution, Intermetallics, Ceramics, Functional Materials and Beyond High Entropy Ceramics 50 Materials Discovery and Design I 19 Materials Discovery and Design II 31 Poster Session 66 Processing and Properties 59 Theory and Fundamentals 41 Integration between Modeling and Experiments for Crystalline Metals: From Atomistic to Macroscopic Scales II Poster Session 66 Session I 32 Session II 42 Session III 50 Session IV 62 Session V 66 Interfaces and Phase Transformations Interfaces and Phase Transformation I 42 Interfaces and Phase Transformations II 51 Poster Session 66
6 PROGRAM At A Glance
Topic Area/Symposium Page
Metallurgy and Magnetism Metallurgy and Magnetism I 59 Metallurgy and Magnetism II 63 Micro- and Nano-Mechanical Behavior of Materials Micro/Nano-Mechanics I 21 Micro/Nano-Mechanics II 33 Micro/Nano-Mechanics III 43 Poster Session 67 Microstructure and Physical Property Optimization in High Entropy Alloys Microstructure and Physical Property Optimization in High Entropy Alloys 22 Thermodynamic Properties, Structure and Phase Stabilities of Special Alloys Poster Session 68 Thermodynamic Properties, Structure and Phase Stabilities of Special Alloys 24 Iron and Steel (Ferrous Alloys) Advanced Steel Metallurgy Characterization 48 Miscellaneous 55 Plate, Pipe & Tube 28 Poster Session 64 Simulation & Modeling 38 Advances in Zinc-coated Sheet Steel Processing and Properties Advances in Zinc-coated Sheet Steel Processing and Properties 39 Applications of Modern Characterization Techniques to Ferrous Alloys and Steel Products Applications of Modern Characterization Techniques to Ferrous Alloys and Steel Products 28 Materials-Environment Interactions Advanced Coatings for Wear and Corrosion Protection Advanced Coatings for Wear and Corrosion Protection I 47 Poster Session 64 Advanced Materials for Harsh Environments Session I 27 Session II 38 Coating and Thin Film Materials for Energy, Aerospace, Environment and Biological Applications Advanced Coating and Thin Films 40 Poster Session 65
7 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Topic Area/Symposium Page
Coatings to Protect Materials from Extreme Environments Coatings for Harsh Environments 62 Environmental and Thermal Barrier Coatings I 49 Environmental and Thermal Barrier Coatings II/Aerosol Deposition 58 Poster Session 65 Computation Assisted Materials Development for Improved Corrosion Resistance Poster Session 65 Residual Lifetime Assessment and Multiscale Modeling Methods 17 Environmentally Assisted Cracking: Theory and Practice EAC of Aluminum Alloys 40 Environment Assisted Cracking 18 Investigating the Role of Hydrogen 30 High Temperature Corrosion and Degradation of Structural Materials CO2-rich Environments/Nuclear Reactor Environments 19 Effects of Water Vapor/Ni-based Alloys and High Temperature Effects 31 Refractory Metal Alloys/Modeling and Theory 41 Light Metal and Composites Technology Composite I: Microstructure and Mechanical Properties 20 Composites II: Development in Light Weight Alloys 32 Substrate Protection for Corrosion Prevention Substrate Protection for Corrosion Prevention I 24 Substrate Protection for Corrosion Prevention II 35 Thermodynamics of Materials in Extreme Environments Thermodynamic Studies of Nuclear Materials 44 Thermodynamics and Stability of Mateirals for Fuel Cells and Other Energy Applications 61 Thermodynamics at the Nanoscale and Interfaces 64 Thermodynamics, Stability, and Reactivity of Materials under Extreme Conditions 53 Modeling Multiscale Modeling of Microstructure Deformation in Material Processing Multiscale Modeling of Microstructure Deformation in Material Processing 43 Poster Session 67 Probabilistic Life Prediction of Materials in Aging Systems Probabilistic Life Prediction of Materials in Aging Systems 44
8 PROGRAM At A Glance
Topic Area/Symposium Page
Nanomaterials Advances in Synthesis and Integration Methods for Enhanced Properties, and Applications in Emerging Nanomaterials 2D and Neuromorphic Materials 28 2D Materials Synthesis and Device Integration 15 Energy Materials I: Energy Storage Materials and Hybrid Perovskite Solar Cells 39 Energy Materials II: Membranes and Catalysts 48 Functional Materials and Nanocomposites 56 Controlled Synthesis, Processing, and Applications of Structural and Functional Nanomaterials Complicated Ceramics and Layered Nanomaterials 29 Development of Nanomaterials and Nanostructures 17 Energy Applications of Nanostructures 40 Poster Session 66 Nanotechnology for Energy, Environment, Electronics, Healthcare and Industry Nanotechnology for Energy, Environment, Electronics, Healthcare and Industry - Session I 52 Nanotechnology for Energy, Environment, Electronics, Healthcare and Industry - Session II 60 Nanotechnology for Energy, Environment, Electronics, Healthcare and Industry - Session III 64 Processing and Manufacturing 12th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing Poster Session 68 Sustainable Manufacturing from Metal and Ceramics based Precursor Materials 45 Sustainable Manufacturing of Ceramics I 12 Sustainable Manufacturing of Ceramics II 36 Sustainable Materials from Agriculture based Precursors 25 Advanced Manufacturing, Processing, Characterization and Modeling of Functional Materials Advanced Manufacturing, Processing, Characterization and Modeling of Functional Materials I 47 Advanced Manufacturing, Processing, Characterization and Modeling of Functional Materials II 55 Advances in Surface Engineering Session I 56 Joining and Integration of Advanced and Specialty Materials Joining and Integration of Advanced and Specialty Materials 20
9 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Topic Area/Symposium Page
Low Density Advanced Composite Materials Low Density Advanced Composite Materials 42 Materials vs Minerals: Bridging the Gap between Materials Science and Earth and Planetary Science Session I 21 Powder Metallurgy of Light, Reactive and Other Non-ferrous Metals Session I 34 Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work – Rustum Roy Symposium Session I 23 Session II 34 Sintering and Related Powder Processing Science and Technologies Field Assisted Sintering and Other Novel Methods 23 Modelling and Processing-related Topics 35 Poster Session 70 Solid State Processing of Metals and Composites Session I 61 Synthesis, Characterization and Application of 3D Graphene Session I 53 Synthesis, Characterization, Modeling and Applications of Functional Porous Materials Functional Porous Materials I 24 Functional Porous Materials II 35 Functional Porous Materials III 44 Poster Session 70 Special Topics 2020 Undergraduate Student Poster Contest 2020 Undergraduate Student Poster Contest 68 ACerS Frontiers of Science and Society - Rustum Roy Lecture ACerS Frontiers of Science and Society - Rustum Roy Lecture 36 ACerS Richard M. Fulrath Award Session ACerS Richard M. Fulrath Award Session 25 ACerS/EPDC: Arthur L. Friedberg Ceramic Engineering Tutorial and Lecture ACerS/EPDC: Arthur L. Friedberg Ceramic Engineering Tutorial and Lecture 12
10 PROGRAM At A Glance
Topic Area/Symposium Page
Art and Cultural Heritage: Discoveries and Education Art and Cultural Heritage: Discoveries and Education 57 BSD/PCSA: Humanitarian Engineering Symposium Humanitarian Engineering 28 Curricular Innovations and Continuous Improvement of Academic Programs (and Satisfying ABET along the Way): The Elizabeth Judson Memorial Symposium Judson Symposium I 17 Judson Symposium II 29 Journal of the American Ceramic Society Awards Symposium Journal of the American Ceramic Society Awards Symposium Session I 51 Journal of the American Ceramic Society Awards Symposium Session II 59 MS&T Student Events MA Speaking Contest Semi-finals 60 Young Professional Session 43 The Materials Genome Initiative and Materials R&D in the 2020s The Materials Genome Initiative and Materials R&D in the 2020s 64 MS&T20 Plenary Sessions ACerS Edward Orton, Jr. Memorial Lecture 35 AIST Adolf Martens Memorial Steel Lecture 22 Broadening Participation in the Materials Science and Engineering Profession 48 TMS/ASM Distinguished Lectureship in Materials and Society 63 Late News Poster Session Biomaterials 66 Ceramic and Glass Materials 67 Energy 70 Fundamentals and Characterization 67
11 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
12th International Symposium on Green and ACerS-ECerS Joint Symposium - Emerging Ceramic Sustainable Technologies for Materials Manufacturing Technologies; Challenges and Future Prospects — and Processing — Sustainable Manufacturing of Emerging Ceramic Technologies I Ceramics I Program Organizers: Tatsuki Ohji, National Institute of Advanced Program Organizers: Surojit Gupta, University of North Dakota; Rajiv Industrial Science and Technology; Jon Binner, University of Birmingham; Asthana, University of Wisconsin; Mritunjay Singh, Ohio Aerospace Martha Mecartney, University of California, Irvine; Anne Leriche, Institute; Tatsuki Ohji, AIST; Enrico Bernardo, University of Padova; Université Polytechnique Hauts-de-France Zhengyi Fu, Wuhan University of Technology; Hisayuki Suematsu, Nagaoka University of Technololgy; Tatami Junichi, Yokohama national Monday AM November 2, 2020 university; Yiquan Wu, Alfred University; Allen Apblett, Oklahoma State
University 8:00 AM Monday AM November 2, 2020 Introductory Comments: ACerS-ECerS Joint Symposium - Emerging 1 Ceramic Technologies; Challenges and Future Prospects: Tatsuki Ohji ; 1National InstituteofAdvanced Industrial Science and Technology 8:00 AM Introductory Comments: 12th International Symposium on Green and 8:05 AM Invited Sustainable Technologies for Materials Manufacturing and Processing: Ceramics and Computing: Modelling, Informatics, Machine Learning and 1 1 Surojit Gupta1; 1University of North Dakota Computational Materials Science: David Smith ; IRCER - University of Limoges 8:05 AM Invited Manganese Dioxide Compounds for Carbon Capture and Storage: Lan Li1; 8:35 AM Invited 1Boise State University Advanced Microscopy and Data Analysis in Electronic Ceramic Research and Development: Elizabeth Dickey1; 1North Carolina State University 8:45 AM Invited Effects of Transition Metals and External Field on The Evolution of Polymer- 9:05 AM Invited Derived Si-O-C Ceramics: Kathy Lu1; Ni Yang1; Jiaqi Zheng1; 1Virginia Nanochemical Approaches to Materials for Energy and Health Applications: 1 1 Polytechnic Institute and State University Sanjay Mathur ; University of Cologne
9:25 AM Invited 9:35 AM Invited Pressureless and Spark Plasma Sintering of Lunar Soil Simulants: Bai Ceramics in Higher Education Nowadays: New Pedagogical Formats 1 Cui1; Xiang Zhang1; Mahdieh Khedmati1; Yong-Rak Kim2; Hyu-Soung Shin3; Searching a Balance Between Material and Immaterial: Laura Montanaro ; 1 1 1 3 3 1 2 Tatiana Mazali ; Paola Palmero ; Politecnico di Torino Jangguen Lee ; Young-Jae Kim ; University of Nebraska-Lincoln; Texas A&M University; 3Korea Institute of Civil Engineering and Building Technology 10:05 AM Invited 10:05 AM Industrial Refractory Ceramics: Challenges, Innovation and Visioneering: Dana Goski1; 1Allied Mineral Products Inc. Green Process for Recycling of Nickel Hydroxide from End of Life Batteries 1 1 1 into Films and Membranes: Allen Apblett ; Dewan Rahman ; Audrey Vecoven ; 10:35 AM Invited 1 Oklahoma State University Dense Powder Beds for AM of Ceramics: Jens Günster1; 1BAM
10:45 AM 11:05 AM Invited Thermal Insulators with Macroscopic and Microscopic Anisotropy Created Advanced Ceramics and Composites for Nuclear Energy – Challenges and by Gelation Freezing Method with Alumina Platelets and Nano-rods: Manabu Future Prospect: Yutai Katoh1; 1Oak Ridge National Laboratory Fukushima1; Yu-ichi Yoshizawa1; 1National Institute of Advanced Industrial Science and Technology (AIST)
10:25 AM Invited ACerS/EPDC: Arthur L. Friedberg Ceramic Engineering Studies on Electrolyte, Anode and Cathode for Developing Safe Sodium-ion Tutorial and Lecture — ACerS/EPDC: Arthur L. Battery Technology: Abhinav Tripathi1; Kang Du1; Markas Law1; Karthikeyan Friedberg Ceramic Engineering Tutorial and Lecture Kavitha1; Lihil Uthpala Subasinghe1; Palani Balaya1; 1National University of Singapore Monday AM November 2, 2020
9:00 AM Invited Ceramic and Glass Science Enabled Energy Technologies: John Hellmann1; 1Pennsylvania State University
12 Additive Manufacturing Modeling and Simulation: Additive Manufacturing of Ceramic-based Materials: AM Materials, Processes, and Mechanics — Process Development, Materials, Process Optimization Additive Manufacturing Modeling and Simulation - and Applications — Additive Manufacturing of Microstructure Evolution Ceramic-based Materials Process Development, Program Organizers: Jing Zhang, Indiana University – Purdue University Materials, Process Optimization and Applications I Indianapolis; Brandon Mcwilliams, US Army Research Laboratory; Li Program Organizers: Lei Chen, University of Michigan-Dearborn; Xuan Ma, Johns Hopkins University Applied Physics Laboratory; Yeongil Jung, Song, University of Iowa; Nahum Travitzky, University of Erlangen- Changwon National University Nuremberg; Yiquan Wu, Alfred University; Paolo Colombo, University of Padova; Rajendra Bordia, Clemson University; Long-Qing Chen, Monday AM November 2, 2020 Pennsylvania State University
Monday AM November 2, 2020 8:00 AM Keynote
A Discrete Dendrite Dynamics Model for Fast Epitaxial Columnar Grain Growth in Metal Additive Manufacturing: Santanu Paul1; Yunhao Zhao1; 8:00 AM Soumya Sridar1; Wei Xiong1; Michael Klecka2; Albert To1; 1University of Introductory Comments: Additive Manufacturing of Ceramic-based Pittsburgh; 2United Technologies Research Center Materials: Process Development, Materials, Process Optimization and
Applications: Lei Chen1; 1University of Michigan-Dearborn 8:40 AM Invited Cellular Automata Modeling of Microstructure Resulting from Novel Scan 8:05 AM Invited Patterns in Selective Laser Melting: Matthew Rolchigo1; Benjamin Stump2; Ultra-fast, Selective Laser Sintering during Additive Manufacturing of Alex Plotkowski2; James Belak1; 1Lawrence Livermore National Laboratory; Alumina: Xiao Geng1; Jincheng Lei1; Shenglong Mu1; Hai Xiao1; Jianhua Tong1; 2Oak Ridge National Laboratory Rajendra Bordia1; Fei Peng1; 1Clemson University
9:00 AM Invited 8:45 AM Transient Evolution of Columnar Dendrites during Additive Manufacturing Fast Fabrication of Bioceramics Parts by Combining Stereolithography – Implications for Process Simulations: Bala Radhakrishnan1; Younggil Song1; and Microwave Sintering: Anne Leriche1; Hugo Curto1; Florian Jean1; Shaan Alex Plotkowski1; Gerald Knapp1; John Turner1; 1Oak Ridge National Laboratory Chamary1; Anthony Thuault1; Fabrice Petit2; 1Université Polytechnique Hauts-
de-France; 2BCRC 9:20 AM Phase Field Simulations of Solid-state Precipitation in AM-processed 625 9:05 AM and 718 Alloys during Post-process Annealing: Bala Radhakrishnan1; Younggil Additive Manufacturing of 8 mol % Yttria Stabilized Zirconia Ceramics: Song1; Sarma Gorti1; Steve DeWitt1; John Turner1; Lyle Levine2; Ranadip John Zaengle1; S.K. Sundaram1; Shawn Allan2; 1Alfred University; 2Lithoz Acharya3; William Tredway3; Amrita Basak4; Tanjheel Mahdi4; 1Oak Ridge America LLC
National Laboratory; 2National Institute of Standards and Technology; 3United 9:25 AM Technologies Research Corporation; 4Pennsylvania State University Effects of Printing Parameters on Microstructure and Mechanical Properties 9:40 AM of Binder Jet 3D Printed WC-Co: Katerina Kimes1; Pierangeli Rodriguez De Modeling Hot Cracking in Metal Additive Manufacturing: Eric Clough1; Vecchis1; Danielle Brunetta1; Drew Elhassid2; Markus Chmielus1; 1University of Brennan Yahata1; Mark O’Masta2; Hunter Martin2; Matt Begley3; 1University of Pittsburgh; 2General Carbide Corp.
California, Santa Barbara / HRL Laboratories; 2HRL Laboratories; 3University of 9:45 AM California, Santa Barbara Direct Ink Writing of Chopped Fiber Ultra-High Temperature Ceramic 10:00 AM Matrix Composites (UHTCMCs): Lisa Rueschhoff1; Zlatomir Apostolov1; Finite Element Analysis of High-strain-rate Deformation: Elizabeth Hodges1; James Kemp2; Brett Compton2; Abel Diaz3; Surya Kalidindi3; Brendan Croom1; Victor Champagne2; Robert Hyers1; 1University of Massachusetts Amherst; 2Cold 1AFRL; 2University of Tennessee-Knoxville; 3Georgia Institute of Technology
Spray Innovations International 10:15 AM Laser-based Additive Manufacturing of Bi-metallic & Tri-metallic Oxide Layers: Yi Lu1; Michael Hurst2; Subramaniam Velumani3; Mathew Kuttolamadom4; Homero Castaneda1; Olivia Esmacher5; 1Department of Materials Science and Engineering, Texas A&M University; 2Department of Engineering Technology & Industrial Distribution Texas A&M University; 3Departamento de Ingeniería Eléctrica (SEES), Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional (CINVESTAV-IPN), Av. Instituto Politécnico Nacional 2508, Col. San Pedro Zacatenco, Ciudad de México, México, CP 07360; 4Department of Engineering Technology & Industrial Distribution, Texas A&M University; 5Texas A&M University
10:35 AM Fused Filament Fabrication of Metal Matrix Composites (MMC): Nancy Bhardwaj1; Hani Henein1; Tonya Wolfe2; 1University of Alberta; 2InnoTech Alberta
13 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
10:55 AM Geometry Limitations of Indirect Laser Sintering of Alumina: Doug Additive Manufacturing: Materials, Alloy Development, Sassaman1; Joseph Beaman1; Desiderio Kovar1; Matthew Ide2; 1Univ of Texas Microstructure and Properties — Additive Austin; 2ExxonMobil Research and Development Company Manufacturing of Metallic Materials (Cu, Co, Mo, and Ni) Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of Additive Manufacturing: Equipment, Instrumentation Technology; Zhi Wang, South China University of Technology; Jurgen and Measurement — Session I Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, Program Organizers: Ulf Ackelid, Freemelt AB; Ola Harrysson, North Norwegian University of Science and Technology Carolina State University Monday AM November 2, 2020 Monday AM November 2, 2020
8:00 AM Invited 8:00 AM Metal Powder Recyclability within Binder Jet Additive Manufacturing Adaptive Multi-Beam Laser Additive Manufacturing (AMB-LAM) Process: Saereh Mirzababaei1; Brian K. Paul1; Somayeh Pasebani1; 1Oregon Technology: Instrumentation and Processes Development and State University
Demonstration: Mikhail Vorontsov1; Nathan Farwell2; Michael Massey2; Geunsik 8:20 AM Lim2; 1University of Dayton; 2II-VI Corporation Multi-objective Optimization of Binder Jetting Process Parameters for the 8:20 AM Invited Co-Cr-Mo Alloy: Ahmet Koca1; Baris Kirim1; Recep Onler2; Emrecan Soylemez1; Dynamics of Laser-powder-metal Interactions in L-PBF Captured by High 1Department of Mechanical Engineering, Istanbul Technical University; Speed Imaging: Manyalibo Matthews1; Nicholas Calta1; Philip Depond1; Gabe 2Department of Mechanical Engineering, Gebze Technical University
Guss1; Saad Khairallah1; Jonathan Lee1; Aiden Martin1; Rongpei Shi1; Maria 8:40 AM Strantza1; Alexander Rubenchik1; 1Lawrence Livermore National Laboratory Reparation of Co-based Parts Using Additive Manufacturing Technologies: 9:00 AM Wilfried Pacquentin1; Jérome Varlet1; Hicham Maskrot1; Gilles Rolland2; Pierre Investigations on Optical Emissions and Their Relation to Processing Wident1; 1CEA; 2EDF – R&D, Département Matériaux et Mécanique des Parameters and Processing Regimes in The Laser Powder Bed Fusion Composants, Site des Renardières, F-77818 Moret sur Loing
Process: Christopher Stutzman1; Abdalla Nassar1; 1Penn State University 9:00 AM 9:20 AM Process and Characterization of 3D-printed Copper: Tawfiq Shamsudeen1; Machine Learning Enabled Acoustic Monitoring for Flaw Type Detection Schuyler Mann1; Leo Santala1; David Betolatti1; Louis Pate1; Jose Alarcon1; in Laser Powder Bed Additive Manufacturing: Brandon Abranovic1; Wentai Michael Bianco1; Ping-Chuan Wang1; 1SUNY New Paltz
Zhang1; Haiguang Liao1; Jack Beuth1; Levent Kara1; Qingyi Dong1; 1Carnegie 9:20 AM Mellon University Sintering and Alloying Kinetics of Particle-Based Ink Extruded Nickel-Based 9:40 AM Scaffolds: Safa Khodabakhsh1; Ashley Paz y Puente1; 1University of Cincinnati
Mechanical In-situ µCT Testing of Lattice Structures Manufactured by 9:40 AM Selective Laser Melting: Pascal Pinter1; Stefan Dietrich2; Lukas Englert2; A New Sintering Process for Binder-Jet Printed 625 Alloy: Chuyuan Zheng1; 1Volume Graphics GmbH; 2KIT / IAM-WK Pierangeli Rodriguez de Vecchis1; Markus Chmielus1; Ian Nettleship1; 1University 10:00 AM of Pittsburgh
Using In-situ Process Monitoring Data to Identify Defective Layers in TI- 10:00 AM 6AL-4V Additively Manufactured Porous Biomaterials: Darragh Egan1; Co-design of Parts and Processing for Thin-walled Structures Produced via Denis Dowling1; 1UCD Laser Powder Bed Fusion: Nicholas Lamprinakos1; Anthony Rollett1; 1Carnegie 10:20 AM Mellon University Polyspectral Analysis for In-situ Prediction of Deviations in Laser Powder Bed Fusion Additive Manufacturing: Arthur French1; Yuri Plotnikov2; John Sions2; Kyle Snyder2; Afroditi Filippas1; 1Virginia Commonwealth University; 2Commonwealth Center for Advanced Manufacturing
14 8:55 AM Additive Manufacturing: Mechanical Behavior of Similarity Analysis and Clustering of Thermal History to Understand Lattice Structures Produced via AM — Additive Process-structure Relationships: Sujana Chandrasekar1; Jamie Coble1; Amy Manufacturing of Lattices - Session I Godfrey1; Serena Beauchamp1; Fred List III2; Vincent Paquit2; Sudarsanam Babu1; 1University of Tennessee; 2Oak Ridge National Laboratory Program Organizers: John Carpenter, Los Alamos National Laboratory; Matthew Begley, University of California, Santa Barbara; Sneha Prabha 9:15 AM Narra, Worcester Polytechnic Institute; Michael Groeber, Ohio State Effect of Sample Geometry and Orientation on Tensile Properties ofTi- University; Isabella Van Rooyen, Idaho National Laboratory; Kyle 1 Johnson, Sandia National Laboratories; Krishna Muralidharan, University 6Al-4V Manufactured by Electron Beam Melting: Gitanjali Shanbhag ; Evan 1 2 1 1 2 of Arizona Wheat ; Shawn Moylan ; Mihaela Vlasea ; University of Waterloo; National Institute of Standards & Technology
Monday AM November 2, 2020 9:35 AM
The Effects of Powder Particle Size Distribution on the Powder andPart 8:00 AM Invited Performance of Laser Powder Bed Fusion 17-4 PH Stainless Steel: Jordan Process-Aware Design of Additively Manufactured Lattice Structures: Weaver1; Justin Whiting1; Carlos Beauchamp1; Max Peltz1; Thien Phan1; Vipin Carolyn Seepersad1; Conner Sharpe1; 1University of Texas at Austin Tondare1; Jared Tarr1; Alkan Donmez1; 1National Institute of Standards and
Technology 8:30 AM Invited High-Throughput Screening of Additive Lattices using a Deep Neural 9:55 AM Network: Brad Boyce1; Anthony Garland1; Benjamin White1; Bradley Jared1; Connecting Metal Powder Morphological Characteristics with Flowability Michael Heiden1; Emily Donahue1; 1Sandia National Laboratories Properties Using Machine Learning: Srujana Rao Yarasi1; Andrew Kitahara1;
Ryan Cohn1; Elizabeth Holm1; Anthony Rollett1; 1Carnegie Mellon University 9:00 AM Invited Mesoscale Open Structures for Lightweight Structures: Joseph Newkirk1; K. Chandrashekhara1; 1Missouri University of Science and Technology Advances in Synthesis and Integration Methods for 9:30 AM Invited Enhanced Properties, and Applications in Emerging Effect of Processing on Micro/Mesoscale Structures and Properties of Nanomaterials — 2D Materials Synthesis and Device Stainless Steel 316L Lattices: Allison Beese1; Cole Britt1; 1Pennsylvania State Integration University Program Organizers: Chang-Yong Nam, Brookhaven National 10:00 AM Laboratory; Jung-Kun Lee, University of Pittsburgh; Zubaer Hossain, University of Delaware Additive Manufacturing Laser Powder Bed Fusion Optimization for : Shawn Hinnebusch1; Kevin Glunt1; Robert Dissolvable Supports with SS 316L Monday AM November 2, 2020 Hoffman2; Owen Hildreth2; Albert To1; 1University of Pittsburgh; 2Colorado
School of Mines 8:00 AM Invited Integration of Synthesis and Computation to Investigate Two-dimensional Additive Manufacturing: Qualification and Certification Transition Metal Chalcogenides: Strain, Defect, and Moiré Engineering: Yanfu — Approaches and Challenges Lu1; Fu Zhang1; Wenkai Zheng2; Daniel Schulman1; Lavish Pabbi1; Kazunori 1 1 1 1 Program Organizers: Faramarz Zarandi, Raytheon Technologies; Jacob Fujisawa ; Ana Laura Elias ; Anna Binion ; Tomotaroh Granzier-Nakajima ; Hochhalter, University of Utah; Douglas Wells, NASA / Marshall Space Tianyi Zhang1; Yu Lei1; Zhong Lin1; Eric Hudson1; Saptarshi Das1; Luis Balicas2; Flight Center; Richard Russell, NASA Kennedy Space Center; Mohsen Mauricio Terrones1; Susan Sinnott1; 1Pennsylvania State University; 2Florida Seifi, ASTM International/Case Western Reserve University; Eric Ott, GE State University Additive; Mark Benedict, Air Force Research Laboratory; Craig Brice, Colorado School Of Mines; J Hector Sandoval, Lockheed Martin 8:30 AM Invited Van der Waals and Remote Epitaxy for Quantum Materials Research: Monday AM November 2, 2020 Jinkyoung Yoo1; 1Los Alamos National Laboratory
9:00 AM Invited 8:00 AM Ideal Graphene Schottky Junctions: Introductory Comments: Additive Manufacturing: Qualification and The Building Block for Reconfigurable Logic and 3D Monolithic Integration: Certification: Faramarz Zarandi1; 1Raytheon Technologies Ji Ung Lee1; 1SUNY Polytechnic Institute
8:05 AM Invited 9:30 AM Invited Physics-based Qualification for Laser Powder Bed Fusion AM: Anthony Mixed-Dimensional Hetero-structures for Advanced Logic and Memory Rollett1; 1Carnegie Mellon University Devices: Deep Jariwala1; 1University of Pennsylvania
8:35 AM 10:00 AM Invited A Comprehensive Digital Platform for Additive Manufacturing: Luke Scime1; Critical Elastic Interactions that Govern Effective Mechanical Behavior of Alka Singh1; Daniel Robertson1; Brandon Mathis1; William Halsey1; James Defective hBN and Graphene: Zubaer Hossain1; 1University of Delaware Haley1; Samuel Leach1; Kyle Saleeby1; Amir Ziabari1; Michael Sprayberry1; Derek Rose1; Ryan Dehoff1; Vincent Paquit1; 1Oak Ridge National Laboratory
15 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Artificial Intelligence for Materials Design and Process Ceramics and Glasses Simulations and Machine Optimization — AI for Materials Design and Process Learning — Machine Learning and Artificial Optimization Intelligence Program Organizers: Adama Tandia, Corning; Venkatesh Botu, Corning Program Organizers: Mathieu Bauchy, University of California, Los Inc. Angeles; Peter Kroll, University of Texas at Arlington; N. M. Anoop Krishnan, Indian Institute of Technology Delhi Monday AM November 2, 2020 Monday AM November 2, 2020
8:00 AM Physics-Informed Machine Learning for Predicting Glass Properties: Kai 8:00 AM Yang1; Han Liu1; Mathieu Bauchy1; 1University of California, Los Angeles Introductory Comments: Ceramics and Glasses Simulations and Machine
Learning: Mathieu Bauchy1; 1University of California Los Angeles 8:30 AM Stacking Fault Energy Prediction for Austenitic Steel: A Machine Learning 8:05 AM Keynote Approach Aided by Thermodynamic Model: Xin Wang1; Wei Xiong1; Application of Natural Language Processing to Zeolites and Cementitious 1 Materials: Elsa Olivetti1; 1Massachusetts Institute of Technology University of Pittsburgh 8:45 AM Keynote Data, Materials and Disorder: Stefano Curtarolo1; 1Duke University Ceramic Matrix Composites — CMC I Program Organizers: Narottam Bansal, National Aeronautics and Space 9:25 AM Keynote Administration; Sung Choi, Naval Air Systems Command; Jacques JAX, M.D.: End-to-End Differentiable, Hardware Accelerated, Molecular Lamon, CNRS Dynamics in Pure Python: Samuel Schoenholz1; Ekin Cubuk1; 1Google Brain
Monday AM November 2, 2020 10:05 AM Invited De Novo Discovery of Nanoporous Structures with Tailored Sorption Isotherm by Machine Learning: Yuhan Liu1; Mathieu Bauchy1; 1University of 8:00 AM California, Los Angeles Characterizing Environment-dependent Fracture Mechanisms of SiC- SiC CMCs via Novel Four-point Bend / Hermeticity Test Frame: Clifton Bumgardner1; Frederick Heim1; David Roache1; Xiaodong Li1; 1University of Virginia
8:20 AM Size-dependent Toughness and Strength in Defective SiC and Diamond Nanowires: Zubaer Hossain1; 1University of Delaware
8:40 AM Invited Properties of Thermally Grown Borosilicate Glasses and Their Impact on CMC Oxidation and Life Prediction: Kaitlin Detwiler1; Bohuslava McFarland1; Megan Watza1; Elizabeth Opila1; 1University of Virginia
9:20 AM
Processing and Characterization of Al /Al2O3 Metal Matrix Composites Produced Using Magnetic Field-Assisted Freeze Casting of Porous Ceramic Structures: Said Bakkar1; Jihyung Lee1; Nicholas Ku2; Diana Berman1; Samir Aouadi1; Raymond Brennan2; Marcus Young1; 1University of North Texas; 2U.S. Army Research Laboratory
9:40 AM Mechanically-robust, Oxidation-resistant, Thermally-cyclable Oxide/Metal Composites for Concentrated Solar Power: Camilla McCormack1; Mario Caccia1; Thuan Nguyen1; Gregory Scofield1; Grigorios Itskos1; Michael Sangid1; Kenneth Sandhage1; 1Purdue University
16 8:05 AM Invited Computation Assisted Materials Development for The Formation Mechanism of TiO2 Polymorphs under Hydrothermal Improved Corrosion Resistance — Residual Lifetime Conditions: Wenbin Cao1; Zefu Tan2; 1University of Science and Technology Beijing; 2Chongqing Three Gorges University Assessment and Multiscale Modeling Methods Program Organizers: Rishi Pillai, Oak Ridge National Laboratory; 8:35 AM Invited Christopher Taylor, Dnv Gl Oxide Nucleation and Growth during In Situ Oxidation of Cu and Cu Alloys: Judith Yang1; 1University of Pittsburgh Monday AM November 2, 2020 9:05 AM
Explore Different Roles of Catalysts in the Growth of Si-based Nanostructures: 8:00 AM Shifat Us Sami1; Samuel Bultman1; Haitao Zhang1; 1University of North Carolina Introductory Comments: Computation Assisted Materials Development for at Charlotte Improved Corrosion Resistance: Rishi Pillai1; 1Oak Ridge National Laboratory
9:25 AM 8:05 AM Invited Direct Synthesis of Nanoclusters from Cu Nanowires: Diego Santa Rosa Assessing High Temperature Durability for Long-term Applications: Bruce Coradini1; Matheus Araujo Tunes1; Thomas Kremmer1; Peter Uggowitzer2; Stefan Pint1; 1Oak Ridge National Laboratory Pogastscher1; Claudio Geraldo Schön3; 1Montauniversty Leoben; 2ETH Zürich; 8:35 AM 3Escola politécnica da Universidade de São Paulo
Development of a Multiscale Corrosion Model for Valve Steels in a Gasoline 9:45 AM Engine Environment: Michael Tonks1; Xueyang Wu1; Simon Phillpot1; Robert Purification of Carbon Nanotube Yarns via Incandescent Annealing: Pouria Ullberg1; Iman Abdallah2; Adrien Couet2; John Perepezko2; Mark Carroll3; Wen Khanbolouki1; Mehran Tehrani1; 1The University of Texas at Austin Jiang4; 1University of Florida; 2University of Wisconsin-Madison; 3Tenneco; 4Idaho National Laboratory 10:05 AM Invited
Multiscale Modeling of Radiation-induced Precipitation Hardening by Cu 8:55 AM Nanoclusters in Fe-Cu Alloys: Xian-Ming Bai1; 1Virginia Polytechnic Institute High Temperature Oxidation Lifetime Modeling of FeCr and NiCr Foils in and State University Water Vapor: Marie Romedenne1; Rishi Pillai1; Sebastien Dryepondt1; Bruce Pint1; 1Oak Ridge National Laboratory 10:35 AM Invited
Nanocomposites with Extremely High Fractions of Nanomaterials via 9:15 AM Infiltration of Polymers into Nanoparticle Packings: Daeyeon Lee1; 1University Simulation of Dissolution of GammaPrime Precipitates in Ni-base Superalloys of Pennsylvania during Oxidation: Taiwu Yu1; Christopher Taylor2; Babu Viswanathan1; Brett Tossey2; Yunzhi Wang1; 1Ohio State University; 2DNV GL 11:05 AM
ZnO Nanoparticle-Poly(methyl methacrylate) Hybrid Ultraviolet Shielding 9:35 AM Films: Kathy Lu1; Lingchen Kong1; Advaith Rau1; Ni Yang1; 1Virginia Polytechnic Machine Learning to Predict Cyclic Oxidation of NiCr-based alloys: Jian Institute and State University Peng1; Marie Romedenne1; Rishi Pillai1; Govindarajan Muralidharan1; Bruce Pint1; J. Haynes1; Dongwon Shin1; 1Oak Ridge National Laboratory 11:25 AM
Towards Superhard Binderless Nanocrystalline Tungsten Carbide: Kevin 9:55 AM Invited Anderson1; James Wollmershauser1; Heonjune Ryou1; Edward Gorzkowski1; Tailoring the Microstructure of Eutectoid Steels during Annealing for Boris Feigelson1; 1U.S. Naval Research Laboratory Improved Corrosion Resistance: Insights from Phase-field Simulations: Kumar Ankit1; 1Arizona State University
10:25 AM Curricular Innovations and Continuous Improvement Metal-Oxide Bond-energy Models for Bond Energies of Alloy Oxides in of Academic Programs (and Satisfying ABET along Corrosion: Szu-Chia Chien1; Wolfgang Windl1; Gerald Frankel1; 1The Ohio State the Way): The Elizabeth Judson Memorial Symposium University — Judson Symposium I Program Organizers: Jeffrey Fergus, Auburn University; Assel Aitkaliyeva, University of Florida; Kester Clarke, Colorado School of Controlled Synthesis, Processing, and Applications Mines; Subhadra Gupta, University of Alabama; Gregg Janowski, of Structural and Functional Nanomaterials — University of Alabama at Birmingham; Karteek Kesavamatham, ZF TRW; Development of Nanomaterials and Nanostructures Janelle Wharry, Purdue University Program Organizers: Haitao Zhang, University of North Carolina at Charlotte; Gurpreet Singh, Kansas State University; Kathy Lu, Virginia Monday AM November 2, 2020
Tech; Edward Gorzkowski, Naval Research Laboratory ; Jian Shi, Rensselaer Polytechnic Institute; Kejie Zhao, Purdue University ; 8:00 AM Michael Naguib, Tulane University; Sanjay Mathur, University of Cologne Introdutory Comments: Curricular Innovations and Continuous Improvement of Academic Programs (and Satisfying ABET along the Way): 1 1 Monday AM November 2, 2020 The Elizabeth Judson Memorial Symposium: Jeffrey Fergus ; Auburn University
8:00 AM 8:05 AM Introductory Comments: Controlled Synthesis, Processing, and Applications (AM) Recent Changes in ABET Engineering General Criteria: Jeffrey 1 1 1 1 Fergus ; Auburn University of Structural and Functional Nanomaterials: Haitao Zhang ; University of North Carolina at Charlotte
17 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:25 AM 8:25 AM (AM) Preparing for an ABET Evaluation – Common Issues: Jeffrey Fergus1; Effect of Hot Forging on The Mechanical and Thermal Properties of Fine- 1Auburn University grained SiC-TiC Composite: Rohit Malik1; Young-Wook Kim1; 1University of
Seoul, Dept. of Materials Science & Engineering, Republic of Korea 8:45 AM (AM) COVID-19 has Worked to Prepare Our Students for Tomorrow’s 8:45 AM Industrial World: Robert Kimel1; 1Pennsylvania State University Characterizing the Flexural Strength of Nanocrystalline Ceramics and
Associated Challenges: Heonjune Ryou1; Kevin Anderson1; John Drazin2; James 9:05 AM Wollmershauser1; Boris Feygelson1; Edward Gorzkowski1; 1U.S. Naval Research (AM) Outreach and Recruitment Activities of Undergraduate Materials Laboratory; 2Washington State University Science and Engineering Students: Isabel Lloyd1; 1University of Maryland
9:05 AM Invited 9:25 AM Control of Electrical Conductivity in Liquid-phase Sintered Silicon Carbide (AM) Comprehensive Review in Graduate Admission – Implementation Ceramics: Young-Wook Kim1; Gyoung-Deuk Kim1; 1University of Seoul and First Outcomes: Wolfgang Windl1; Maryam Ghazisaeidi1; La’Tonia Stiner- Jones1; 1Ohio State University 9:35 AM New Insights into Deformation Mechanisms of Amorphous Silicon Nitride Nanoporous Membranes from Atomistic Simulations: Ali K. Shargh1; James Engineered Phase Transformations — Engineered McGrath1; Niaz Abdolrahim1; 1University of Rochester Phase Transformations Program Organizers: Eric Lass, University of Tennessee, Knoxville; Niyanth Sridharan, Oak Ridge National Laboratory; Peeyush Nandwana, Environmentally Assisted Cracking: Theory and Oak Ridge National Laboratory; Bij-Na Kim, Carpenter Additive Practice — Environment Assisted Cracking Program Organizers: Jenifer Locke, Ohio State University; Wenjun Cai, Monday AM November 2, 2020 Virginia Polytechnic Institute and State University; Bai Cui, University of
Nebraska-Lincoln; Srujan Rokkam, Advanced Cooling Technologies Inc; Kaila Bertsch, University of Wisconsin-Madison 8:00 AM : Adam Creuziger1; Phase Fraction Measurements in Textured Materials Monday AM November 2, 2020 Michael Cox2; Kip Findley2; Thomas Gnaupel-Herold1; Whitney Poling1; Chris
Calhoun1; 1National Institute of Standards and Technology; 2Colorado School of Mines, Metalllurgical and Materials Engineering Department 8:00 AM
Introductory Comments: Environmentally Assisted Cracking: Theory and 8:20 AM Practice: Jenifer Locke1; 1Ohio State University Microstructure Engineering in Metastable Beta Titanium Alloy: Stoichko Antonov1; Zachary Kloenne2; Xing Zhang3; Dian Li3; Yiliang Liao3; Hamish 8:05 AM Invited Fraser2; Yufeng Zheng3; 1Max-Planck-Institut für Eisenforschung; 2Ohio State Cracking Mechanism of Carbon Steel in Presence of H2S/CO2 and H2S University; 3University of Nevada, Reno Scavenger, a Theory Based on Electrochemistry, Raman, and Tensile Testing: Vinicio Ynciarte1; Leonardo Caseres2; James Dante2; Brendy Rincon Troconis1; 8:40 AM 1University of Texas at San Antonio; 2Southwest Research Institute Grain Size-effect on the Survivability of Shape Memory Zirconia during Cyclic Martensitic Transformations: Isabel Crystal1; Christopher Schuh1; 8:45 AM 1Massachusetts Institute of Technology Analyzing High-angle Grain Boundary Network Connectivity Using Graph Theory: Syeda Noor E Sumaiya1; Matthew Steiner1; 1University of Cincinnati
9:05 AM Engineering Ceramics: Microstructures, Properties, Elucidating the Loading Rate Dependence of Hydrogen Environment- and Applications — Microstructure and Properties of assisted Cracking Behavior in Ti, Fe, Al, and Ni-based Structural Alloys: Engineering Ceramics Zachary Harris1; Erin Dubas1; James Burns1; 1University of Virginia Program Organizers: Young-Wook Kim, University of Seoul; Hua-Tay Lin, Guangdong University of Technology; Junichi Tatami, Yokohama 9:25 AM National University Pit-to-Crack Transition in Stress Corrosion Cracking of Type 304 Stainless Steels Under Marine Exposure Conditions: Alana Parey1; 1Sandia National Monday AM November 2, 2020 Laboratories; The Ohio State University
9:45 AM 8:00 AM SCC Resistance of 304 Stainless Steel after Friction Stir Welding, Soldering, Introductory Comments: Engineering Ceramics: Microstructure-Property- Cold Spray, Vaporizing Foil Actuated Welding, or Conventional Tungsten- Performance Relations and Applications: Young-Wook Kim1; 1University of arc Welding: Jenifer Locke1; Jay Srinivasan1; Benjamin Sutton1; Jianxiong Seoul Li1; Glenn Daehn1; Anupam Vivek1; Thodla Ramgopal2; Alexander Shapiro3;
Antonio Ramirez1; 1Ohio State University; 2DNV GL; 3Ohio State University and 8:05 AM Titanium Brazing Inc Influence of Three-dimensional Microstructure on the Impact Response of Advanced Ceramics: Jonathan Ligda1; Brendan Koch2; Debjoy Mallick1; David Hogan2; 1Combat Capabilities Development Command Army Research Laboratory; 2University of Alberta
18 Functional Defects in Electroceramic Materials — High Entropy Materials: Concentrated Solid Solution, Defect Engineering in Functional Ceramics Intermetallics, Ceramics, Functional Materials and Program Organizers: Hui Xiong, Boise State University; Hua Zhou, Beyond — Materials Discovery and Design I Argonne National Laboratory; Yanhao Dong, Massachusetts Institute of Program Organizers: Xingbo Liu, West Virginia University; Michael Technology Gao, National Energy Technology Laboratory; Peter Liaw, University of Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, Monday AM November 2, 2020 Alfred University; Yu Zhong, Worcester Polytechnic Institute
Monday AM November 2, 2020 8:00 AM Invited
Designing Optimal Defect Environments for High Ionic Conductivity and Surface Catalytic Reactions: Lane Martin1; 1University of California, Berkeley 8:00 AM
Introductory Comments: High Entropy Materials: Xingbo Liu1; 1West 8:30 AM Invited Virginia University Co-doping Strategies for Controlling Electrical Conductivity of BaTiO3 Ceramics: Elizabeth Dickey1; Gyung Hyun Ryu1; Preston Bowes1; Jonathon 8:05 AM Keynote Baker1; Douglas Irving1; 1North Carolina State University The Department of Energy’s High Performance Materials Program and Its
High Entropy Alloy R&D: Briggs White1; 1U.S. Department of Energy - NETL 9:00 AM Invited Functional Defects by Design in Energy and Quantum Materials: 8:45 AM Invited Panchapakesan Ganesh1; 1Oak Ridge National Lab. Beyond Mechanical Metastability in FeMnCoCr?: Haoxue Yan1; Maria
Ronchi1; Shaolou Wei1; C. Tasan1; 1Massachusetts Institute of Technology 9:30 AM Invited Defects Engineering in Epitaxial Complex Oxides for Designed Functionality: 9:05 AM Invited Yingge Du1; 1Pacific Northwest National Laboratory High-Entropy Alloy Approach to Thermoelectric Materials: Joseph Poon1; 1University of Virginia
Glasses, Optical Materials, and their Functional 9:25 AM Invited Computational Techniques to Study High-entropy Materials: Stefano Applications: Current Issues in Science & Technology Curtarolo1; 1Duke University — Structure, Dynamics and Surface Reactivity of Glass Materials 9:45 AM Invited Program Organizers: Jincheng Du, University of North Texas; S. K. The Role of Large Static Displacements in Stabilizing BCC High Entropy 1 1 1 2 Sundaram, Alfred University Alloys: German Samolyuk ; Yuri Osetsky ; Malcolm Stocks ; James Morris ; 1Oak Ridge National Laboratory; 2Ames Laboratory
Monday AM November 2, 2020 10:05 AM Invited
Computationally Guided High Entropy Alloy Discovery: John Sharon1; Ryan 8:00 AM Invited Deacon1; Soumalya Sarkar1; Kenneth Smith1; 1UTRC
Surface Reactivity of Multi-component Glasses: Alastair Cormack1; 1Alfred 10:25 AM Invited University Using Machine Learning, CALPHAD, and DFT to Accelerate Materials 8:30 AM Development: Kenneth Vecchio1; Kevin Kaufmann1; 1University of California, Melt-Quenching vs. Sol-gel vs. Vapor Deposition vs. Irradiation: Influence of San Diego the Synthesis Method on the Structure of SiO2: Zhe Wang1; Mathieu Bauchy1; 1University of California, Los Angeles High Temperature Corrosion and Degradation of 8:50 AM Photo-elastic Confirmation of Fast Surface Relaxation of Silica Glasses Structural Materials — CO2-rich Environments/Nuclear in the Presence of Water: Bronson Hausmann1; Emily Aaldenberg1; Minoru Reactor Environments Tomozawa1; 1Rensselaer Polytechnic Institute Program Organizers: Kinga Unocic, Oak Ridge National Laboratory; Raul Rebak, GE Global Research; David Shifler, Office of Naval 9:10 AM Research; Richard Oleksak, National Energy Technology Laboratory Enhanced Optical Nonlinearity in Bismuth Borosilicate Glass Dispersed with Eu2O3 Stabilized Gold Nanoparticles: Shivani Singla1; Venu Gopal Monday AM November 2, 2020 2 1 3 1 Achanta ; Om Prakash Pandey ; Gopi Sharma ; Thapar Institute of Engineering 2 3 & Technology; Tata Institute of Fundamental Research, Mumbai; Kanya Maha 8:00 AM Vidyalaya, Jalandhar Introductory Comments: High-temperature Corrosion and Degradation of Structural Materials: Kinga Unocic1; 1Oak Ridge National Laboratory 9:30 AM Invited Elucidating Defect Behaviors and Lithium Ion Diffusion Mechanisms in 8:05 AM 1 Solid State Electrolytes from Atomistic Computer Simulations: Jincheng Du ; Long-term Oxidation Behavior of Chromia-forming Alloys in High- 1 University of North Texas 1 1 1 temperature CO2 and Air: Richard Oleksak ; Casey Carney ; Gordon Holcomb ; Omer Dogan1; 1National Energy Technology Laboratory 10:00 AM Relative Roles of O and Si in Crack Nucleation and Propagation Mechanisms 8:25 AM Invited in Amorphous Silica: Zubaer Hossain1; 1University of Delaware Exploring Materials Options for sCO2 Applications: Steels to Cermets: Bruce Pint1; Rishi Pillai1; James Keiser1; 1Oak Ridge National Laboratory
19 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
9:05 AM Corrosion Study of Stainless Steel 316 with Different Coatings in MgCl2-KCl Light Metal and Composites Technology — Heat Transfer Fluid: Yuxiang Peng1; Ramana Reddy1; 1University of Alabama Composites I: Microstructure and Mechanical Properties Program Organizers: Ramasis Goswami, Naval Research Laboratory; Joining and Integration of Advanced and Specialty Xiaoming Wang, Purdue University; Alex Moser, U.S. Naval Research Materials — Joining and Integration of Advanced and Laboratory; Alan Luo, Ohio State University; Manoj Kolel-Veetil, Naval Specialty Materials Research Laboratory; Kumar Sadayappan, CanmetMATERIALS; Tanjore Program Organizers: Milena Salvo, Politecnico di Torino; Rajiv Asthana, Jayaraman, University of Michigan-Dearborn University of Wisconsin; Valentina Casalegno, Politecnico di Torino; Monica Ferraris, Politecnico di Torino - Italy; Michael Halbig, NASA Glenn Monday AM November 2, 2020
Research Center; Dietmar Koch, University of Augsburg; Hans-Peter Martin, Fraunhofer-Institut für Keramische Technologien und Systeme 8:00 AM IKTS; Michael Reece, Queen Mary, University of London; Peter Tatarko, Introductory Comments: Light Metals and Composite Technology: Ramasis Institute of Inorganic Chemistry Slovak Academy of Sciences; Fabrizio Goswami1; 1Naval Research Laboratory Valenza, National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy 8:05 AM Invited Joining of Light Metals to Polymer Composites by Overcasting Technique: Monday AM November 2, 2020 Aashish Rohatgi1; Kumar Sadayappan2; 1Pacific Northwest National Laboratory; 2CANMET Materials
8:00 AM 8:25 AM Invited Introductory Comments: Joining and Integration of Advanced and Specialty Nanostructured Composites via Environmentally Controlled Pressure Materials: Monica Ferraris1; 1Politecnico di Torino Assisted Sintering: James Wollmershauser1; Boris Feigelson1; Kevin 8:05 AM Keynote Anderson2; Benjamin Greenberg2; Kedar Manandhar3; Heonjune Ryou1; Adhesive Bonding of Carbon Fiber Reinforced Polymers to Dual Phase 980 Edward Gorzkowski1; 1U.S. Naval Research Laboratory; 2National Research Steel: Yong Chae Lim1; Jian Chen1; Ngoc Nguyen1; Yuan Li1; Amit Naskar1; Zhili Council Postdoctoral Research Fellow sited at U.S. Naval Research Laboratory; Feng1; 1Oak Ridge National Laboratory 3University of Maryland
8:45 AM 8:45 AM Invited Controlling the Formation of Intermetallic Compounds in TLP Joining Revisiting Phase Field Simulations of Theta’ Variant Selection during Stress of Grade-2 Titanium Alloy: AHM Rahman1; 1Pennsylvania State University, Aging of Al-Cu Alloys: Bala Radhakrishnan1; Amit Shyam1; 1Oak Ridge Harrisburg National Laboratory
9:05 AM 9:05 AM Effects of Strength Overmatching on the Assessment of Toughness in Hybrid Microstructure, Interfaces, and Mechanical Properties of Ceramic Matrix 1 1 Composites: Alex Moser1; Ramasis Goswami1; 1Naval Research Laboratory Laser Arc Welded High Strength Steel: Daniel Bechetti ; Matthew Sinfield ; Maximilian Kinsey1; Nathan Korinchak1; 1NSWC Carderock Division 9:25 AM 9:25 AM Functional Relationships between Treatment Time, Microstructure and Functionally-graded Interlayers for Enhanced Divertor/Heatsink Bonding: Mechanical Properties of Ultrasonically Cast Metal Matrix Nanocomposites: Huong Le1; Kamyar Ahmadi2; Brian Skinn1; Stephen Snyder1; Ed Liguori3; Tanaji Paul1; Cheng Zhang1; Benjamin Boesl1; Arvind Agarwal1; 1Florida 1 1 2 3 International University Timothy Hall ; Faraday Technology Inc; University of Houston; Braze Engineering and Design 9:45 AM 9:45 AM Microstructure and Interfaces of Nanocomposites Manufactured in Solid State: Ramasis Goswami1; 1Naval Research Laboratory Development of Interlayer Technology to Join Advanced and Dissimilar : Bryan Lara1; Rafael Giorjao1; Antonio Ramirez1; 1The Ohio State Materials 10:05 AM Invited University Poly(Carborane-siloxane-(aryl)Acetylene)s: A Versatile Inorganic-Organic 10:05 AM Polymer Platform for Advanced Materials Applications: Manoj Kolel-Veetil1; Spark Plasma Joining of Ultra-high Temperature Ceramics: Ambreen Nisar1; 1Naval Research Laboratory Cheng Zhang1; Benjamin Boesl1; Arvind Agarwal1; 1FIU
20 9:05 AM Machine Learning for Discovery of Structure-Process- Formation of Carbon Nano-fragments from Silicon Carbide Surfaces: Property Relations in Electronic Materials — Machine Implications for Carbon Reservoirs in Circumstellar Envelopes: Abhishek Learning in Materials Engineering I Thakur1; Venkateswara Manga1; Krishna Muralidharan1; Thomas Zega1; L.M. Ziurys1; 1University of Arizona Program Organizers: B. Reeja Jayan, Carnegie Mellon University; Aarti Singh, Carnegie Mellon University 9:25 AM Deformation of Pyrometric Cones and Coal Ash Cones at High Temperatures: Monday AM November 2, 2020 Peter Hsieh1; 1National Energy Technology Laboratory
9:45 AM 8:00 AM Uncertainty of Phase Equilibrium: Marius Stan1; 1Argonne National Laboratory Introductory Comments: Machine Learning for Discovery of Structure- Process-Property Relations in Electronic Materials: B. Reeja Jayan1; 10:15 AM 1Carnegie Mellon University Thermodynamic Modeling of Al-Ti-rich Pyroxene Solid Solutions: Deducing
the Nebular Conditions of Condensation of Ti+3 and Ti+4 Oxidation States: 8:05 AM Venkateswara Manga1; Tom Zega1; 1University of Arizona Expert-guided Learning for Data-constrained Materials Science Problems: Gopaljee Atulya1; Shuyan Zhang1; Alexander Davis1; 1Carnegie Mellon University 10:35 AM
Quantum Mechanical Modeling of Mineral-water Interfaces with Surface 8:25 AM Invited Defects: James Kubicki1; 1University of Texas at El Paso 3D Printing and Machine Learning: Anthony Rollett1; Srujana Yarasi1; Christopher Kantzos1; Elizabeth Holm1; 1Carnegie Mellon University
8:55 AM Micro- and Nano-Mechanical Behavior of Materials — Parametric Analysis to Quantify Process Input Influence on the Printed Micro/Nano-Mechanics I Densities of Binder Jetted Alumina Ceramics: Edgar Mendoza1; Jack Beuth1; Program Organizers: Sundeep Mukherjee, University of North Baby Reeja-Jayan1; 1Carnegie Mellon University Texas; Mahmoud Baniasadi, Georgia Southern University; Meysam
Haghshenas, University of Toledo 9:15 AM SimuLearn: Machine Learning-empowered Fast and Accurate Simulator Monday AM November 2, 2020 1 1 1 to Support 4D Printing Design: Humphrey Yang ; Kuanren Qian ; Haolin Liu ; Yuxuan Yu1; Jianzhe Gu1; Matthew McGehee1; Yongjie Zhang1; Lining Yao1; 1Carnegie Mellon University 8:00 AM Introductory Comments: Micro- and Nano-Mechanical Behavior of 9:35 AM Materials: Sundeep Mukherjee1; 1University of North Texas Neural Network Potential for Lattice Dynamics Calculations and Thermal Conductivity Prediction: Jie Gong1; Hyun-Young Kim1; Alan McGaughey1; 8:05 AM Invited 1Carnegie Mellon University Microparticle Impacts at Supersonic Speeds, and the Role of Surface Layers: Ahmed Tiamiyu1; Jasper Lienhard1; Christopher Schuh1; 1Massachusetts Institute 9:55 AM of Technology Uncertainty Quantification and Active Learning of Neural Network Models for Predicting ZrO2 Crystal Energy: Jayanth Koushik1; Sungjun Choi1; Aarti 8:25 AM Invited Singh1; 1Carnegie Mellon University Spatial-temporal Investigation of Shear Bands in Bulk Metallic Glasses: Xie Xie1; Yu-Chieh Luo2; Yang Tong3; Junwei Qiao4; Gongyao Wang1; Shigenobu Ogata5; Hairong Qi1; Karin Dahmen6; Yanfei Gao1; Peter Liaw1; 1University of Materials vs Minerals: Bridging the Gap between Tennessee; 2National Chiao Tung University; 3City University of Hong Kong; Materials Science and Earth and Planetary Science — 4Taiyuan University of Technology; 5Osaka University; 6University of Illinois at Urbana-Champaign Session I Program Organizers: Jessica Rimsza, Sandia National Laboratories; 8:45 AM Krishna Muralidharan, University of Arizona; Thomas Zega, University of An Integrated In Situ Solution for Automated Material Testing in SEM: Arizona William Harris1; Fang Zhou1; Luyang Han1; Kyle Crosby1; Hrishikesh Bale1; 1Carl Zeiss Microscopy Monday AM November 2, 2020 9:05 AM
Computer Vision Approach to Study Surface Deformation of Materials: 8:00 AM Chaoyi Zhu1; Haoren Wang2; Kevin Kaufmann2; Kenneth Vecchio2; 1Carnegie Introductory Comments: Materials vs Minerals: Bridging the Gap between Mellon University; 2University of California, San Diego Materials Science and Earth and Planetary Science: Jessica Rimsza1; 1Sandia National Laboratories 9:25 AM Invited
Characterization of Electroless Copper Deposits on Electrospun PAN Fibers 8:05 AM in Aligned and Random Configurations: Temitope Aminu1; Molly Brockway2; Thermodynamic Origins of the First Solids in the Solar System: The Need Jack Skinner2; David Bahr1; 1Purdue University; 2Montana Technological for Computational Materials Science: Thomas Zega1; Venkat Manga1; Krishna University Muralidharan1; 1University of Arizona
9:45 AM Invited 8:35 AM Time-resolved Atomic-scale Observations of Deformation and Fracture of New Worlds - New Chemistry: Alexandra Navrotsky1; 1Arizona State University Nanostructured Materials: Pan Liu1; Mingwei Chen2; 1Shanghai Jiao Tong University; 2Johns Hopkins University
21 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
10:05 AM Quantitative Evaluation of Large Nanoindentation Data Sets: Bernard MS&T20 Plenary Session — Becker1; Benjamin Stadnick1; Eric Hintsala1; Ude Hangen1; Douglas Stauffer1; AIST Adolf Martens Memorial Steel Lecture 1Bruker Nano Monday AM November 2, 2020
Microstructure and Physical Property Optimization in 11:00 AM High Entropy Alloys — Microstructure and Physical Introductory Comments: MS&T20 Plenary Session: Chirag Mahimkar1; 1Big Property Optimization in High Entropy Alloys River Steel
Program Organizers: Bharat Gwalani, Pacific Northwest National 11:05 AM Plenary Laboratory; Arun Devaraj, Pacific Northwest National Laboratory; Eric Effects of Retained Austenite Stability and Microstructure Refinement on Lass, University of Tennessee, Knoxville; Rajarshi Banerjee, University of Properties of Advanced High Strength Sheet Steels: Nina Fonstein1; 1Retired, North Texas ArcelorMittal in East Chicago
Monday AM November 2, 2020 11:45 AM 1 Concluding Comments: MS&T20 Plenary Session: Chirag Mahimkar ; Clifton Bumgardner2; 1Big River Steel; 2University of Virginia 8:00 AM 3D Twinning in High Entropy Alloys: Scott Mao1; Zhengwu Fang1; 1University of Pittsburgh Next Generation Biomaterials — Next Generation 8:30 AM Cancelled Biomaterials I Best Strength-ductility Combination in an Fcc Based High Entropy Alloy: Program Organizers: Roger Narayan, University of North Carolina; Bharat Gwalani1; Sriswaroop Dasari2; Abhinav Jagetia2; Vishal Soni2; Rajarshi David Dausch, RTI International; Sanjiv Lalwani, Lynntech, Inc. Banerjee2; 1Pacific Northwest National Laboratory;2 University of NorthTexas Monday AM November 2, 2020 9:00 AM
Short-range Atomic Order Drives Exceptional Mechanical Properties 8:00 AM Invited of Multi-principal Element Alloys: Sezer Picak1; Prashant Singh2; Yuriy Functionalization of Titanium for Biomedical Use: Masanori Kikuchi1; Chumlyakov3; Duane D Johnson2; Raymundo Arroyave1; Ibrahim Karaman1; 1National Institute for Materials Science 1Texas A&M University; 2Ames Laboratory; 3Siberian Physical Technical Institute
8:40 AM Invited 9:20 AM A Failing Healthcare System with Decreasing Life Expectancies: Are On the Low Cycle Fatigue Response of CoCrNiFeMn High Entropy Alloy Conventional Biomaterials to Blame?: Thomas Webster1; 1Northeastern with Ultra-fine Grain Structure: Sezer Picak1; Thomas Wegener2; Seyedvahid University Sajjadifar2; Julia Richter2; César Sobrero2; Thomas Niendorf2; Ibrahim Karaman1; 1Texas A&M University; 2University of Kassel 9:20 AM
Bioceramics in the Ca2P2O7 – Mg2P2O7 System with a Tailored 9:40 AM Architecture for Bioimplantation: Gilyana Kazakova1; Tatiana Safronova1; Hierarchical Eutectoid Nano-lamellar Decomposition in an Al0.3CoFeNi Tatiana Shatalova1; Vladimir Zaitsev2; Irina Selezneva3; 1Lomonosov Moscow Complex Concentrated Alloy: Sriswaroop Dasari1; Bharat Gwalani1; Abhinav State University; 2Priorov National Medical Research Center of Traumatology Jagetia1; Vishal Soni1; Stephane Gorsse2; Rajarshi Banerjee1; 1University of North and Orthopaedics; 3Institute of Theoretical and Experimental Biophysics of RAS Texas; 2University of Bordeaux, France
9:40 AM 10:00 AM Cancelled Biomimetic Patterns of Metallic Nanoparticles for Antimicrobial Intergranular Fracture of HfNbTaTiZr at Elevated Temperature: Megan Applications: Srikanthan Ramesh1; Chaitanya Mahajan1; Iris Rivero1; Denis Emigh1; Leah Mills1; Sean Murray1; Noah Phillips2; Tresa Pollock1; 1University Cormier1; 1Rochester Institute of Technology of California, Santa Barbara; 2ATI Metals
10:00 AM Invited 10:20 AM Cancelled Fibrin-modulating Nanogels for the Treatment of Disseminated Intravascular In Situ Atom Probe Tomography of Early State Oxidation Mechanism in Coagulation: Ashley Brown1; 1North Carolina State University High Entropy Alloys: Bharat Gwalani1; Matthew Olszta1; Sten Lambeets1; Elizabeth Kautz1; Arun Devaraj1; 1Pacific Northwest National Laboratory 10:20 AM
Corrosion Modelling of Coated Pure Magnesium Towards Degradation- 10:40 AM Cancelled Controlled Bone Fixation Implants: Moataz Abdalla1; Hamdy Ibrahim1; Effects of Advanced Mechanical Surface Treatments on Residual Stress, 1University of Tennessee at Chattanooga Microstructure and Mechanical Properties of a FeMnCoCrSiCu High Entropy Alloy: Anurag Sharma1; Chung Seok Kim1; Jie Song1; Seetha Mannava1; Saurabh Nene2; Rajiv Mishra2; Vijay Vasudevan1; 1University of Cincinnati; 2University of North Texas
11:00 AM Cancelled Micro Structure and Corrosion Responses of Laser Deposited High Entropy Alloys: Modupeola Dada1; Patricia Popoola1; Ntombizodwa Mathe2; Sisa Pityana2; Samson Adeosun3; Olufemi Aramide1; 1Tshwane University of Technology; 2Council for Scientific and Industrial Research;3 University of Lagos, Akoka
22 8:20 AM Phase Transformations in Additively Manufactured Laser Processing Cokes and Chars: Randy Vander Wal1; Joseph Abrahamson1; 1Penn State University Materials — Additive Manufacturing - Phase Transformations - In-situ and Ex-situ Experimental 8:40 AM Work Laser Ablation & Passivation of Aluminum Alloys: Robert Lavelle1; David Program Organizers: Antonio Ramirez, Ohio State University; Ashley Rearick1; Melissa Klingenberg1; David Snyder1; Joshua Fox1; Austin Witt2; Paz y Puente, University of Cincinnati; Matthew Steiner, University Joshua Robinson2; 1Penn State University; 2NSWC Crane of Cincinnati; Vijay Vasudevan, University of Cincinnati; Bij-Na Kim, Lancaster University/LPW Technology; Eric Lass, National Institute of 9:00 AM Standards and Technology Recent Developments In Microwave-metal Discharge Based Machining Process and Associated Challenges: Anurag Singh1; Gaurav Kumar1; Apurbba Monday AM November 2, 2020 Sharma1; 1Indian Institute of Technology Roorkee
9:20 AM 8:00 AM Invited Study of Mechanical Properties of Microwave Processed Biodegradable Understanding the Effect of Thermal Gradients on Additively Manufactured Metal Composites: Shivani Gupta1; Apurbba Sharma1; Dinesh Agrawal2; 1 1 (AM) Builds Using In Situ TEM: Sriram Vijayan ; Meiyue Shao ; Joerg Inderdeep Singh1; 1Indian Institute of Technology Roorkee; 2The Pennsylvania 1 1 Jinschek ; The Ohio State University State University
8:40 AM 9:40 AM Laser Powder Bed Fusion of Grade 300 Maraging Steel for Tooling Microwave-assisted Hydrothermal Carbonization of Switchgrass and Low 1 1 1 Applications: Peeyush Nandwana ; Rangasayee Kannan ; Andrew Nguyen ; Rank Coals for Solid Fuel Production: Pranjali Muley1; Christina Wildfire1; 1 1 1 Donovan Leonard ; Ryan Dehoff ; Oak Ridge National Laboratory Dushyant Shekhawat1; 1National Energy Technology Laboratory
9:00 AM 10:00 AM Nitrogen Effects in Additively Manufactured Martensitic Precipitation- The Effect of Microwave Sintering on Additively Manufactured Ceramics: 1 1 hardenable Stainless Steels: Eric Lass ; University of Tennessee, Knoxville 1 2 1 2 Maxwell Telmer ; Tania Slawecki ; Edgar Mendoza ; Dinesh Agrawal ; B. Reeja Jayan1; 1Carnegie Mellon University; 2Penn State University 9:20 AM Process Optimization and Microstructure Analysis to Understand Laser 10:20 AM Invited 1 Powder Bed Fusion of Stainless Steel 316L: Nathalia Diaz Vallejo ; Cameron Ionic and Mixed Ionic Electronic Conductor Oxides for Microwave Active 1 1 1 2 2 Lucas ; Nicolas Ayers ; Holden Hyer ; Brandon McWilliams ; Kyu Cho ; Yongho Catalysis: Christina Wildfire1; Anthony Carter2; Edward Sabolsky2; Dushyant 1 1 2 Sohn ; University of Central Florida; US Army Research Laboratory 1 1 1 2 Shekhawat ; Daniel Haynes ; National Energy Technology Laboratory; West 9:40 AM Virginia University In-situ Characterization of Rapid Phase Evolution of AM Metals with High Energy Synchrotron X-ray Diffraction: Seunghee Oh1; Rachel Lim1; Joseph Aroh1; Joseph Pauza1; Runbo Jiang1; Venkata Satya Surya Amaranth Karra1; Sidi Sintering and Related Powder Processing Science and Feng1; Andrew Chuang2; Joel Bernier3; Benjamin Gould2; Robert Suter1; Anthony Technologies — Field Assisted Sintering and Other Rollett1; 1Carnegie Mellon University; 2Argonne National Laboratory; 3Lawrence Novel Methods Livermore National Laboratory Program Organizers: Wolfgang Rheinheimer, TU Darmstadt; Ricardo Castro, University of California, Davis; Zachary Cordero, Rice University; 10:00 AM Eugene Olevsky, San Diego State University Effects of Laser Powder Bed Fusion Parameters and Heat Treatment on Microstructure and Mechanical Behavior of Inconel 718 Alloy: Thinh Monday AM November 2, 2020 Huynh1; Abhishek Mehta1; Sharon Park1; Holden Hyer1; Le Zhou1; Devin
Imholte2; Nicolas Woolstenhulme2; Daniel Wachs2; Yongho Sohn1; 1University of Central Florida; 2Idaho National Laboratory 8:00 AM Invited Modification of Grain Boundary Core Structures by Applied Electric Fields: Klaus Van Benthem1; Lauren Hughes1; Sean Russell1; 1University of California, Davis Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, 8:30 AM Lasers, and Mechanical Work – Rustum Roy Flash Sintering Solid State Ceramic Electrolytes Using a Novel Multi- Symposium — Session I electrode Approach: Gareth Jones1; Christopher Green2; David Pearmain2; Geoff 1 3 1 1 2 Program Organizers: Morsi Mahmoud, King Fahd University of West ; Emma Kendrick ; Claire Dancer ; University of Warwick; Lucideon Limited; 3University of Birmingham Petroleum & Minerals; Dinesh Agrawal, Pennsylvania State University; Guido Link, Karlsruhe Institute of Technology; Motoyasu Sato, Chubu 8:50 AM Invited University; Rishi Raj, University of Colorado Grain Growth Measurements of Anti-thermal Strontium Titanate with Non- Monday AM November 2, 2020 destructive High Energy X-ray Diffraction Microscopy (HEDM): Amanda 1 2 3 1 4 Krause ; He Liu ; Christopher Marvel ; Bryan Conry ; Michael Hoffmann ; Robert Suter2; Carl Krill5; Martin Harmer3; 1University of Florida; 2Carnegie 8:00 AM Mellon University; 3Lehigh University; 4Karlsruhe Institute of Technology; 5Ulm Deforming Polycrystalline Ceramics by Dislocation Based Plastic University Deformation: Lukas Porz1; Michael Scherer1; Wolfgang Rheinheimer1; Atsutomo Nakamura2; Jürgen Rödel1; 1Technical University of Darmstadt; 2Nagoya University
23 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
9:20 AM 8:05 AM Invited Electron Microscopy Observation of Electric Field Assisted Sintering of Synchrotron Structure and Sorption Properties of a Metal Organic Stainless Steel Nanoparticles: Fei Wang1; Qin Zhou1; Xingzhong Li1; Michael Framework Compound Ni(3-methyl-4,4’-bipyridine)[Ni(CN)4] for CO2 Nastasi1; Bai Cui1; 1University of Nebraska Lincoln Mitigation Application: Winnie Wong-Ng1; Jeffrey Culp2; Yu-Sheng Chen3;
SuYin Wang3; Daniel Siderius1; Andrew Allen1; Eric Cockayne1; 1National 9:40 AM Invited Institute of Standards and Technology; 2LRST/Battelle, National Energy Selective Sintering Technique: Modeling and Experimentation: Elisa Technology Laboratory; 3University of Chicago Torresani1; Geuntak Lee1; Eugene Olevsky1; 1San Diego State University
8:35 AM Invited 10:10 AM Density Functional Theory Study of the Porous Metal-organic Framework Reduced Pressure Nanosintering during Environmentally Controlled – Material Ni-Bpy-Me: Eric Cockayne1; Winnie Wong-Ng1; Andrew Allen1; Pressure Assisted Sintering: Kevin Anderson1; James Wollmershauser1; Mason 1National Institute of Standards and Technology Wolak1; Boris Feigelson1; 1U.S. Naval Research Laboratory 9:05 AM Invited Experimental Thermodynamics of Zeolites and Metal-organic Frameworks: Substrate Protection for Corrosion Prevention — Xianghui Zhang1; Cody Cockreham1; Esra Yilmaz1; Baodong Wang2; Hui Sun3; Substrate Protection for Corrosion Prevention I Di Wu1; 1Washington State University; 2National Institute of Clean-and-Low- Carbon Energy; 3East China University of Science and Technology Program Organizers: Mary Lyn Lim, PPG Industries; Cortney Crane, Exponent; Qixin Zhou, The University of Akron; Kylee Fazende, NSWC 9:35 AM Carderock Division; Raul Rebak, GE Global Research; Tushar Borkar, Cleveland State University Luminescent Metal-organic Framework-Based Sensors of Rare Earth Elements in Aqueous Streams: Scott Crawford1; John Baltrus1; Paul Ohodnicki1; 1National Energy Technology Laboratory Monday AM November 2, 2020
9:55 AM Invited
8:00 AM Porous Organic Cage Composite Membranes for Post-combustion CO2 Characterizations of Corrosion Tested CFRC-AZ31B Joint by Friction Self- Separation: Fangming Xiang1; David Hopkinson1; 1National Energy Technology 1 1 1 Laboratory pierce Riveting Process: Yong Chae Lim ; Jiheon Jun ; Jian Chen ; Michael Brady1; Donovan Leonard1; Zhili Feng1; 1Oak Ridge National Laboratory 10:25 AM 8:20 AM Thermodynamics of Naturally Occurring 2D and 3D Mineral Hosts: Zeolites, The Effect of Mg added Al-Si Coating on the Corrosion of Hot-stamped Boron Layered Double Hydroxides and Clays: Xianghui Zhang1; Cody Cockreham1; Steels: Changkyu Kim1; Seongkoo Cho2; Wonseog Yang3; Homero Castaneda1; Su Ha1; Di Wu1; 1Washington State University 1Texas A&M University; 2Lawrence Livermore National Laboratory; 3Hyundai Steel Corportation Thermodynamic Properties, Structure and Phase 8:40 AM Stabilities of Special Alloys — Thermodynamic Advanced Composite Coating for Carbon Steel Corrosion Prevention: Fangming Xiang1; Christy Koerner1; David Hopkinson1; Margaret Ziomek- Properties, Structure and Phase Stabilities of Special Moroz1; 1National Energy Technology Laboratory Alloys Program Organizers: Erwin Povoden-Karadeniz, TU Wien CDL-IPE; 9:00 AM Ernst Kozeschnik, Vienna University of Technology Enhancing Corrosion Resistance of Steel Substrates with Reduced Graphene Oxide Reinforced Polymer Composite Coatings: Recep Onler1; Samet Akturk1; Monday AM November 2, 2020 Erdal Topac2; Ercan Ozdemir1; Ahmet Oktem1; Ongun Saban1; Ilke Dolaner1; 1 2 Gebze Technical University; Hazerfen Kimya Malzeme ve Enerji Teknolojileri Sanayi Ticaret A.S. 8:00 AM Introductory Comments: Thermodynamic Properties, Structure and Phase Stabilities of Special Alloys: Erwin Povoden-Karadeniz1; 1TU Wien CDL-IPE Synthesis, Characterization, Modeling and Applications of Functional Porous Materials — 8:05 AM Invited Development of High-performance Al-Ce-Based Alloys: Aurelien Perron1; Functional Porous Materials I 1 1 2 2 2 Program Organizers: Lan Li, Boise State University; Winnie Wong-Ng, Emily Moore ; Joel Berry ; Zachary Sims ; Hunter Henderson ; Orlando Rios ; 3 1 1 2 National Institute of Standards and Technology; Kevin Huang, University David Weiss ; Scott McCall ; Lawrence Livermore National Laboratory; Oak Ridge National Laboratory; 3Eck Industries of South Carolina 8:35 AM Monday AM November 2, 2020 Deformation Induced Precipitation in Microalloyed Al-Cu: Roman Schuster1;
Tomasz Wojcik1; Erwin Povoden-Karadeniz1; 1Christian Doppler Laboratory 8:00 AM for Interfaces and Precipitation Engineering (CDL-IPE), Institute of Materials Introductory Comments: Synthesis, Characterization, Modeling and Science and Technology, TU Wien
Applications of Functional Porous Materials: Lan Li1; 1Boise State University 8:55 AM Thermal Decomposition of Quasicrystals in Powder-processed Icosahedral- Phase-strengthened Aluminum Alloys: Hannah Leonard1; Sarshad Rommel1; Mingxuan Li1; Thomas Watson2; Tod Policandriotes3; Mark Aindow1; 1University of Connecticut; 2Pratt & Whitney; 3Collins Aerospace
24 9:15 AM 2:30 PM Invited Thermodynamic Properties of Special Alloys of the Ti-Al System Formed Transformation-induced Plasticity in Ceria-doped Zirconia Composites: under SHS Conditions: Borys Sereda1; Dmytro Sereda1; Yuriy Belokon2; Irina Towards Ductile and Shape-memory Ceramics: Alethea Liens1; Helen Kruglyak2; 1Dneprovsky State Technical University; 2ZNU Reveron1; Damien Fabrègue1; Jerome Chevalier1; Mike Swain2; 1MATEIS, UMR
CNRS 5510, INSA de Lyon, University of Lyon; 2University of Sydney 9:35 AM Interdiffusion in Ternary Ti-Al-Mo System and Its Application during 1 1 Homogenization Treatment: Gyanendra Chauhan ; Kaustubh Kulkarni ; ACerS Richard M. Fulrath Award Session 1Indian Institute of Technology Kanpur
9:55 AM Monday PM November 2, 2020 Examining the Oxidation in NiAl Binary Alloys Using Cellular Automata:
Indranil Roy1; Pratik Ray2; Ganesh Balasubramanian1; 1Lehigh University; 2IIT 2:00 PM Invited Roper Bottom-up Growth Design and Property Control for Dielectric Thin Films 10:15 AM Invited and Nanostructures: Tomoaki Yamada1; 1Nagoya University
Thermodynamic Modeling of the Ga-Mn-Ni System for Heusler Alloy 2:40 PM Invited Development: Liangyan Hao1; Jakub Toman1; Markus Chmielus1; Wei Xiong1; Novel Design and Fabrication of Piezoelectric MEMS and their Application 1University of Pittsburgh to IoT: Takeshi Kobayashi1; 1National Institute of Advanced Industrial Science and Technology (AIST)
12th International Symposium on Green and 3:00 PM Invited Sustainable Technologies for Materials Manufacturing Bulk Nanostructured Ceramics Using Novel Processing Techniques: Edward Gorzkowski1; 1Naval Research Laboratory and Processing — Sustainable Materials from Agriculture-based Precursors 3:20 PM Invited Program Organizers: Surojit Gupta, University of North Dakota; Rajiv Development of Co-fired All Solid State Lithium Ion Battery with Multilayer Asthana, University of Wisconsin; Mritunjay Singh, Ohio Aerospace Ceramic Technology: Hiroshi Sato1; 1TDK Electronics GmbH & Co OG Institute; Tatsuki Ohji, AIST; Enrico Bernardo, University of Padova; Zhengyi Fu, Wuhan University of Technology; Hisayuki Suematsu, 3:40 PM Invited Nagaoka University of Technololgy; Tatami Junichi, Yokohama national Energy Harvesting Materials and Devices: Shashank Priya1; 1Pennsylvania university; Yiquan Wu, Alfred University; Allen Apblett, Oklahoma State State University University
Monday PM November 2, 2020 Additive Manufacturing Modeling and Simulation:
AM Materials, Processes, and Mechanics — Additive 2:00 PM Invited Manufacturing Modeling and Simulation - Residual Processing and Mechanical Characterization of Continuous Natural Stress, Fatigue Property, and Thermal Property 1 1 Fiber Reinforced Composites: Satoshi Kobayashi ; Systems Design, Tokyo Program Organizers: Jing Zhang, Indiana University – Purdue University Metropolitan University Indianapolis; Brandon Mcwilliams, US Army Research Laboratory; Li Ma, Johns Hopkins University Applied Physics Laboratory; Yeongil Jung, 2:40 PM Changwon National University On the Design of Porous Materials by Using Agriculture Based Precursors: Surojit Gupta1; 1University of North Dakota Monday PM November 2, 2020
3:10 PM A Sustainable and Energy-efficient Electrochemical Technology for 2:00 PM 1 1 Dewatering of Cellulosic Nanomaterials: Santosh Vijapur ; Huong Le ; Timothy Development of Temperature History Profiles for Production of Ti-6Al-4V 1 1 1 1 2 1 Hall ; Jennings Taylor ; Maria Inman ; Stephen Snyder ; Kim Nelson ; Faraday Using a Semi-Analytical Model: Lonnie Smith1; Amit K Verma1; Andrew (Drew) 2 Technology Inc; AVAPCO LLC Huck1; P. Chris Pistorius1; Anthony (Tony) Rollett1; 1Carnegie Mellon University
2:20 PM Invited ACerS-ECerS Joint Symposium - Emerging Ceramic A System Dynamics approach to submodels for Residual Stress Predictions of SLM Parts: Jose Mayi-Rivas1; Seetha Raghavan1; 1University of Central Florida Technologies; Challenges and Future Prospects — Emerging Ceramic Technologies II 2:40 PM Program Organizers: Tatsuki Ohji, National Institute of Advanced Stress State Dependent Plasticity and Fracture Properties of Additively Industrial Science and Technology; Jon Binner, University of Birmingham; Manufactured Stainless Steel 316L: Alexander Wilson-Heid1; Allison Beese1; Martha Mecartney, University of California, Irvine; Anne Leriche, 1Pennsylvania State University Université Polytechnique Hauts-de-France 3:00 PM Monday PM November 2, 2020 Defect-based Fatigue Model for AlSi10Mg Produced by Laser Powder Bed Fusion Process: Avinesh Ojha1; Wei-Jen Lai1; Ziang Li1; 1Ford Motor Company
2:00 PM Invited Colloidal Processing as an Effective Tool for Manufacturing Functional Ceramics with Enhanced Properties: Rodrigo Moreno1; 1Institute of Ceramics and Glass, CSIC
25 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Additive Manufacturing of Ceramic-based Materials: Additive Manufacturing: Materials, Alloy Development, Process Development, Materials, Process Optimization Microstructure and Properties — Additive and Applications — Additive Manufacturing of Manufacturing Process Control and Optimization Ceramic-based Materials: Process Development, Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of Materials, Process Optimization and Applications II Technology; Zhi Wang, South China University of Technology; Jurgen Program Organizers: Lei Chen, University of Michigan-Dearborn; Xuan Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, Song, University of Iowa; Nahum Travitzky, University of Erlangen- Norwegian University of Science and Technology Nuremberg; Yiquan Wu, Alfred University; Paolo Colombo, University of Padova; Rajendra Bordia, Clemson University; Long-Qing Chen, Monday PM November 2, 2020
Pennsylvania State University 2:00 PM Monday PM November 2, 2020 Additive Manufacturing of Nuclear Spacer Grids: Syed Zia Uddin1; Qu He1; Jack Beuth1; 1Carnegie Mellon University
2:00 PM Invited 2:20 PM Toughening of SiC-based Ceramics by Chopped Fiber via Selective Laser 1 1 Characterization of the Balling Ddefect during Laser Powder Bed Additive Sintering: Preliminary Thinking and Attempts: Jie Yin ; Xuejian LIU ; 1 1 1 1 1 1 1 Manufacturing: Debomita Basu ; Jack Beuth ; Bryan Webler ; Carnegie Zhongming Chen ; Zhengren HUANG ; Shanghai Institute of Ceramics Chinese Mellon University Academy of Sciences
2:40 PM 2:40 PM Mesoscale crystallographic texture control via beam path sequencing in Process Parameter Variations and 3D Printing of Ceria Ceramics: Ryan 1 1 1 1 1 2 1 electron beam melting: Patxi Fernandez-Zelai ; Michael Kirka ; Yousub Lee ; Fordham ; S. K. Sundaram ; Shawn Allan ; New York State College of Ceramics, Sebastien Dryepondt1; Maxim Gussev1; 1Oak Ridge National Laboratory Alfred University; 2Lithoz America, LLC
3:00 PM 3:00 PM Prediction and validation of successful multi-material AM interfaces: Initiation of Selective Laser Flash Sintering in Yttria-Stabilized Zirconia: 1 1 1 1 1 1 1 1 Nicholas Jones ; Rishikesh Magar ; Amir Farimani ; Jack Beuth ; Maarten de Deborah Hagen ; Joseph Beaman ; Desiderio Kovar ; University of Texas at Boer1; 1Carnegie Mellon Univ Austin
3:30 PM Uncertainty Quantification in Additive Manufacturing of Piezocomposites Additive Manufacturing: Mechanical Behavior of through Physics-informed Data-driven Modelling: Zhuo Wang1; Li He1; Chen Lattice Structures Produced via AM — Additive Jiang1; Zhen Hu1; Xuan Song1; Lei Chen1; 1University of Michigan-Dearborn Manufacturing of Lattices - Session II Program Organizers: John Carpenter, Los Alamos National Laboratory; Matthew Begley, University of California, Santa Barbara; Sneha Prabha Additive Manufacturing: Equipment, Instrumentation Narra, Worcester Polytechnic Institute; Michael Groeber, Ohio State and Measurement — Session II University; Isabella Van Rooyen, Idaho National Laboratory; Kyle Program Organizers: Ulf Ackelid, Freemelt AB; Ola Harrysson, North Johnson, Sandia National Laboratories; Krishna Muralidharan, University Carolina State University of Arizona
Monday PM November 2, 2020 Monday PM November 2, 2020
2:00 PM 2:00 PM Invited Mechanical Properties of Additively Manufactured Metal Lattices: Manyalibo Optical Emission Sensing for Laser-based Additive Manufacturing – What 1 2 3 4 5 1 1 Matthews ; Bradley Jared ; John Carpenter ; Benjamin Brown ; Paul Korinko ; Are We Actually Measuring?: Christopher Stutzman ; Abdalla Nassar ; Wesley 1 2 Mitchell1; 1Penn State University Lawrence Livermore National Laboratory; Sandia National Laboratories; 3Los Alamos National Laboratory; 4Kansas City National Security Complex; 2:20 PM 5Savannah River National Laboratory
Combining In-situ Monitoring and X-ray Computed Tomography to Assess the Quality of Parts Manufactured by Powder Bed Fusion: Philip Sperling1; 2:30 PM Patrick Fuchs1; 1Volume Graphics GmbH Direct Metal Laser Sintering Strategies for Fabrication of Finer Resolution Cellular Structures: Ebrahim Asadi1; Fatemeh Hejripour1; Muhammad Abdus 2:40 PM Salam1; 1University of Memphis
Characterization of 3D-printed Metals with Ultrasonic Technique: Terence Costigan1; Ping-Chuan Wang1; Rob Van Pelt2; 1SUNY New Paltz; 2Sono-Tek 2:50 PM Invited Corporation Tailoring Hierarchical Material Performance Through Process Manipulation: Bradley Jared1; Brad Boyce1; Anthony Garland1; Michael Heiden1; Scott Jensen1; 3:00 PM David Moore1; David Saiz1; Benjamin White1; Timothy Ruggles1; 1Sandia In-Process Quality Control and Optimization for Ceramic 3D Printing: National Laboratories Zhaolong Zhang1; Richard Sisson1; Christopher Brown1; Jianyu Liang1; 1Worcester Polytechnic Institute 3:20 PM Microstructure and Mechanical Properties of Additively Manufactured Lattice Structures of Co-Cr-Mo Alloy: Bandar AlMangour; 1
26 3:20 PM Invited Additive Manufacturing: Qualification and Certification Nonlinear Ultrasound for Nondestructive Evaluation of Microstructural Defects: Kathryn Matlack1; 1University of Illinois Urbana-Champaign — Microstructure and Properties Program Organizers: Faramarz Zarandi, Raytheon Technologies; Jacob 4:00 PM Invited Hochhalter, University of Utah; Douglas Wells, NASA / Marshall Space In Situ Observation of Short- and Long-Timescale Material Property Flight Center; Richard Russell, NASA Kennedy Space Center; Mohsen 1 1 Seifi, ASTM International/Case Western Reserve University; Eric Ott, GE Evolution Under Extreme Conditions: Cody Dennett ; Idaho National Laboratory Additive; Mark Benedict, Air Force Research Laboratory; Craig Brice, Colorado School Of Mines; J Hector Sandoval, Lockheed Martin 4:40 PM STEM Characterization of Dislocation Loops for an Irradiated Model FCC Monday PM November 2, 2020 Alloy: Pengyuan Xiu1; Lumin Wang1; Kevin Field1; 1University Of Michigan
5:00 PM 2:00 PM Invited Selective Irradiation Behavior in Dual Phase 308L Filler of SA508-304L Microstructure to Aerostructure: Retrospectives and Microstructural Dissimilar Metal Weldment after Proton Irradiation: Zhen Li1; Xun Zhan1; Challenges in Industry for Titanium Additive Manufacturing: Andrew Baker1; Weicheng Zhong1; Benjamin Sutton2; Ovidiu Toader3; Gary Was3; Brent Heuser1; Matthew Crill1; Fatmata Barrie1; 1The Boeing Company 1University of Illinois at Urbana-Champaign; 2Electric Power Research Institute; 2:30 PM 3University of Michigan A Multi-Sensor Comparative Study for Fatigue Prognosis of Additively Manufactured Metallic Specimens: Susheel Dharmadhikari1; Asok Ray1; Amrita Basak1; 1Pennsylvania State University Advanced Materials for Harsh Environments — 2:50 PM Session I Simulation of the Effect of Texture on Anisotropy in SLM-Produced IN718 Program Organizers: Navin Manjooran, Solve Technology and Research, Inc.; Gary Pickrell, Virginia Tech Microstructures: Wesley Tayon1; Saikumar Yeratapally2; Joseph Pauza3; Anthony Rollett3; Jacob Hochhalter4; 1NASA Langley Research Center; 2National Institute Monday PM November 2, 2020 of Aerospace; 3Carnegie Mellon University; 4University of Utah
3:10 PM Invited 2:00 PM Reducing Anisotropic Deformation of LPBF Inconel 718 for Applications in Introductory Comments: Advanced Materials for Harsh Environments: : Nadia Kouraytem1; John Varga1; Benham Amin-Ahmadi2; Extreme Conditions Gary Pickrell1; 1Virginia Tech Raphael Chanut1; Ashley Spear1; Owen Kingstedt1; 1University of Utah; 2Colorado School of Mines 2:05 PM Keynote
Multi-Material Optical Fibers for Cryogenic Temperature Sensing: Daniel 3:40 PM Homa1; Navin Manjooran2; Zachary Hile1; Gary Pickrell1; 1Virginia Tech; 2Solve Pore Formation in Laser Powder Bed Fusion Inconel 718 through Technology and Research, Inc. Multiphysics Modeling: Qian Chen1; Seth Strayer1; Albert To1; 1University of Pittsburgh 2:35 PM Invited Impact of Intermediate Ratio on the Corrosion Between Interface of Alumino-silicate Glasses and Crofer 22APU/YSZ: Gurbinder Kaur1; 1Simon Fraser University Advanced Characterization of Materials for Nuclear, Radiation, and Extreme Environments — Novel 3:05 PM Techniques Air Stable Molten Salts and Corrosion Resistant Containment for High- Program Organizers: Samuel Briggs, Oregon State University; Temperature Thermal Energy Storage and Heat Transfer for Concentrated Christopher Barr, Sandia National Laboratories; Emily Aradi, University Solar Power: Adam Caldwell1; Grigorios Itskos1; Kenneth Sandhage1; 1Purdue of Huddersfield; Michael Short, Massachusetts Institute of Technology; University Janelle Wharry, Purdue University; Cheng Sun, Idaho National Laboratory; Dong Liu, University of Oxford; Khalid Hattar, Sandia 3:25 PM National Laboratories Evaluation of Electroceramic-based LC Resonator for Monitoring High Temperature Systems: Kavin Sivaneri Varadharajan Id1; Gunes Yakaboylu1; Monday PM November 2, 2020 Peter Dreher Pozo1; Matthew Thomas1; Riley Vozar1; Katarzyna Sabolsky1; 1 1 1 1 Edward Sabolsky ; Konstantinos Sierros ; Daryl Reynolds ; West Virginia University 2:00 PM Invited Characterization of Microstructure Evolution in Ceramic Materials Using 3:45 PM 1 1 Acoustic and Thermal Transport Measurements: Marat Khafizov ; Ohio Revealing Temperature Dependence of Electronic Structures and Optical State University Properties of High-temperature Gas Sensing Perovskites via First-principles 2:40 PM Simulation: Jongwoo Park1; Ting Jia1; Wissam Saidi2; Benjamin Chorpening1; Study on Hydrogen Isotopes Solubility and Diffusivity in Y- and Co-doped Yuhua Duan1; 1National Energy Technology Laboratory; 2University of Barium-zirconates Using Tritium Imaging Plate Technique: M. Khalid Pittsburgh, Department of Mechanical Engineering and Materials Science Hossain1; Y. Hatano2; K. Hashizume1; 1Kyushu University; 2University of Toyama
3:00 PM
Mobility of Hydrogen in YH2 Probed by Nuclear Magnetic Resonance: Scarlett Widgeon Paisner1; Aditya Shivprasad1; Erik Luther1; 1Los Alamos National Laboratory
27 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Advanced Steel Metallurgy — Plate, Pipe & Tube Applications of Modern Characterization Techniques Program Organizers: Chirag Mahimkar, Big River Steel; Justin Raines, to Ferrous Alloys and Steel Products — Applications SSAB Americas; Kip Findley, Colorado School of Mines; Alla Sergueeva, of Modern Characterization Techniques to Ferrous NanoSteel Company Inc; Daniel Branagan, The NanoSteel Co Alloys and Steel Products Monday PM November 2, 2020 Program Organizers: Steven Thompson, Colorado School of Mines; Calixto Garcia, University of Pittsburgh
2:00 PM Monday PM November 2, 2020
Parametric study of cold wire tandem submerged arc welding of heavy gauge : Tailin Ren1; Hani Henein1; J Barry Wiskel1; Douglas Ivey1; X70 linepipe steel 2:00 PM Mohsen Mohammadijoo2; Robert Lazor3; 1University of Alberta; 2EVRAZ Inc. Photons, Electrons, and X-rays: A New Platform for Rapid Imaging and NA; 3TC Energy Corporation Characterization of Engineering Materials: William Harris1; Hrishikesh 2:20 PM Bale1; Kyle Crosby1; Tobias Volkenandt1; Fabian Perez-Willard1; 1Carl Zeiss A Predictive Tool to Aid the Design, Heat Treatment and Qualification of Microscopy Pipeline Fittings: Fateh Fazeli1; Robert Cicoria2; James Saragosa1; Cindy Guan3; 1CanmetMATERIALS; 2McMaster University; 3TC Energy BSD/PCSA: Humanitarian Engineering Symposium — Humanitarian Engineering Advances in Synthesis and Integration Methods for Program Organizers: Victoria Christensen, University of California Santa Enhanced Properties, and Applications in Emerging Barbara; Scott Mccormack, University of California, Davis; Michael Nanomaterials — 2D and Neuromorphic Materials Walden, Colorado School of Mines; Christopher Kassner, University of Virginia; Kimiko Nakajima, University of California, Davis; Adrianna Program Organizers: Chang-Yong Nam, Brookhaven National Lupercio, Boise State University Laboratory; Jung-Kun Lee, University of Pittsburgh; Zubaer Hossain, University of Delaware Monday PM November 2, 2020
Monday PM November 2, 2020
2:00 PM Invited 2:00 PM Invited Service Learning and Ceramic Material Research on Point-of-Use Water : Ian Electrochemical 2D Synapses for Neuromorphic Computing Applications: Treatment Technologies for Use in Marginalized Communities 1; 1University of Pittsburgh Feng Xiong1; 1University of Pittsburgh Nettleship
2:30 PM Invited 2:30 PM Invited Harder, Better, Faster, Greener Building Materials by Cold Sintering Iontronic Devices for Energy Efficient Electronics and Neuromorphic 1 1 1 1 1 1 1 1 Process: Sun Hwi Bang ; Arnaud Ndayishimiye ; Esther Obonyo ; Clive Randall ; Computing: Ke Xu ; Zhongmou Chao ; Susan Fullerton-Shirey ; University of 1 Pittsburgh Pennsylvania State University
3:00 PM Invited 3:00 PM Invited Impact of Processing Parameters on Metal Oxide Resistive Random Access SciBridge Project: Preparing the Next-generation of Scientists through Renewable Energy Kits: Michael Spencer1; 1North Carolina State University Memory (RRAM) Performance and Implications for non-von Neumann Computing Approaches: Nathaniel Cady1; 1SUNY Polytechnic Institute 3:30 PM Panel Discussion 3:30 PM Invited Efficient Neuromorphic Computing Enabled by Spin-Transfer Torque: Devices, Circuits and Systems: Abhronil Sengupta1; 1Penn State University Bulk and Sheet Thermal-Deformation Processing and Microstructure Development in Metals – 4:00 PM Characterization, Experiments and Modeling — Introduction to Research Capabilities at Center for Functional Nanomaterials, Session I : Chang-Yong Nam1; 1Brookhaven National a DOE National User Facility Program Organizers: Daniel Coughlin, Los Alamos National Laboratory; Laboratory Kester Clarke, Colorado School of Mines; Piyush Upadhyay, Pacific Northwest National Laboratory
Monday PM November 2, 2020
2:00 PM Microstructure and Mechanical Properties of Diffusion Bonded IN740H: Kaimiao Liu1; Tao Liu1; Omer N Dogan1; 1National Energy Technology Laboratory
2:20 PM Characterisation of static recrystallisation and grain growth in designed gradient microstructures: a pathway to high-throughput microstructural testing?: Nicholas Breeuwer1; Daniel Lewis2; Milo Kral1; Catherine Bishop1; 1University of Canterbury; 2Rennselaer Polytechnic Institute 28 Ceramic Matrix Composites — CMC II: Foreign Object Controlled Synthesis, Processing, and Applications Damage/NDE of Structural and Functional Nanomaterials — Program Organizers: Narottam Bansal, National Aeronautics and Space Complicated Ceramics and Layered Nanomaterials Administration; Sung Choi, Naval Air Systems Command; Jacques Program Organizers: Haitao Zhang, University of North Carolina at Lamon, CNRS Charlotte; Gurpreet Singh, Kansas State University; Kathy Lu, Virginia Tech; Edward Gorzkowski, Naval Research Laboratory ; Jian Shi, Monday PM November 2, 2020 Rensselaer Polytechnic Institute; Kejie Zhao, Purdue University ; Michael Naguib, Tulane University; Sanjay Mathur, University of
Cologne 2:00 PM Multi-scale Physics-based Modeling of Particle-Impact Erosion of CMCs: Monday PM November 2, 2020 1 1 1 1 David Newsome ; Rae Waxman ; Stephen Giles ; Debasis Sengupta ; Ashok Raman1; Stewart Silling2; 1CFD Research Corporation; 2Sandia National Laboratory 2:00 PM Light Transmission Modulation in Ceramics through Mesoscale Modelling: 2:20 PM Invited Lukasz Kuna1; James Wollmershauser2; John Mangeri3; Boris Feigelson2; Edward In Situ Observation of Crack Formation in CMCs Using X-ray Computed Gorzkowski2; Serge Nakhmanson1; 1University of Connecticut; 2Naval Research 1 2 2 3 Tomography up to 1200°C: Dong Liu ; Jon Ell ; Harold Barnard ; Stefan Reh ; Laboratory; 3Institute of Physics, Academy of Sciences of the Czech Republic Robert Ritchie2; 1University of Bristol; 2Lawrence Berkeley National Laboratory; 3DLR 2:20 PM Invited Chemical Pre-intercalation Synthesis and Exfoliation of Bilayered Vanadium 3:00 PM Oxides for Energy Storage Applications: Ekaterina Pomerantseva1; 1Drexel Quantifying Damage Mechanisms by Observing Damage Evolution in University SiC/SiC Composites using Micro-CT Techniques: Ashley Hilmas1; Kathleen Sevener2; John Halloran2; 1Air Force Research Lab; 2University of Michigan 2:50 PM d-Spacing Effect on the Electrochemical Performance of MXene in Organic and Room Temperature Ionic Liquids: Kun Liang1; Naresh Osti2; Eugene Ceramics and Glasses Simulations and Machine Mamontov2; Bishnu Thapaliya3; Sheng Dai2; Michael Naguib1; 1Tulane University; 2Oak Ridge National Laboratory; 3University of Tennessee Learning — Atomistic Modeling Program Organizers: Mathieu Bauchy, University of California, Los 3:10 PM Angeles; Peter Kroll, University of Texas at Arlington; N. M. Anoop Effect of Cation Pre-intercalation on the Electrochemical Performance of Krishnan, Indian Institute of Technology Delhi 1 Multilayer Ti3C2 MXene in Aqueous Electrolyte: Kaitlyn Prenger ; Ameer Al- Temimy2; Kun Liang1; Simone Raoux2; Tristan Petit2; Michael Naguib1; 1Tulane Monday PM November 2, 2020 University; 2Helmholz-Zentrum Berlin für Materialien und Energie GmbH
2:00 PM Invited Ab-initio and Reactive MD Simulations of Polymer Pyrolysis and Formation Curricular Innovations and Continuous Improvement of Silicon-based Ceramics of Academic Programs (and Satisfying ABET along : Peter Kroll1; 1University of Texas at Arlington the Way): The Elizabeth Judson Memorial Symposium 2:30 PM — Judson Symposium II A Reactive Force Field (ReaxFF) for Polymer-derived Ceramics: Shariq Program Organizers: Jeffrey Fergus, Auburn University; Assel Haseen1; Ilia Ponomarev2; Peter Kroll1; 1University of Texas Arlington; 2Czech Aitkaliyeva, University of Florida; Kester Clarke, Colorado School of Technical University in Prague Mines; Subhadra Gupta, University of Alabama; Gregg Janowski, University of Alabama at Birmingham; Karteek Kesavamatham, ZF TRW; 2:50 PM Janelle Wharry, Purdue University Theoretical Calculation of Formation Energies and Site Preference of Substitutional Divalent Cations in Carbonated Apatite: Tatsushi Saito1; Monday PM November 2, 2020 1 1 1 1 Tatsuya Yokoi ; Atsutomo Nakamura ; Katsuyuki Matsunaga ; Nagoya University 2:00 PM 3:10 PM (PM) ABET Related Topics: Recent Changes in ABET Engineering General Criteria: Jeffrey Fergus1; 1Auburn University The Role of Pore Pattern on The Ductility Enhancement of Crystalline 1 1 Silicon Nitride Nanoporous Membranes: Ali K. Shargh ; James McGrath ; Niaz 2:05 PM Abdolrahim1; 1University of Rochester (PM) ABET Related Topics: Program Criteria for Materials, Metallurgical, 1 1 3:30 PM Invited Ceramics Engineering Programs: Gregg Janowski ; University of Alabama at Birmingham Beyond the Average: Fluctuations in Glass-forming Systems: Katelyn Kirchner1; John Mauro1; 1Pennsylvania State University 2:10 PM 4:00 PM (PM) ABET Related Topics: Preparing for an ABET Evaluation – Common Issues: Jeffrey Fergus1; 1Auburn University The Energy Landscape Governs Brittle-to-Ductile Transitions in Glasses: Longwen Tang1; Mathieu Bauchy1; 1University of California, Los Angeles
29 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:15 PM Question and Answer Period 2:40 PM
Atomistic Simulations of the Transport and Trapping of Hydrogen in 2:40 PM Zirconium: Richard Smith1; Natalia Tymiak-Carlson1; Mikael Christensen2; (PM) Remote and Virtual Instruction: Online Delivery of a Mechanical Erich Wimmer3; 1Naval Nuclear Lab - Bettis; 2Materials Design, Inc. ; 3Materials Properties of Materials Laboratory Course: Susan Gentry1; 1University of Design, Inc. California, Davis
3:00 PM 2:45 PM Hydrostatic Instability as the Underlying Mechanism of Hydrogen (PM) Remote and Virtual Instruction: COVID-19 has Worked to Prepare Embrittlement: Michael McGuire Our Students for Tomorrow’s Industrial World: Robert Kimel1; 1Pennsylvania State University 3:20 PM
The Relationship between Post-build Stress-relief Heat Treatment and the 2:50 PM Hydrogen Embrittlement Susceptibility of Additively Manufactured IN625: (PM) Remote and Virtual Instruction: Capstone Meets Pandemic; Mark Stoudt1; Richard Ricker1; Maureen Williams1; Fan Zhang1; 1National Experiences of Students and Mentors Working through the COVID-19 Institute of Standards and Technology Lockdown: Benjamin Church1; 1University of Wisconsin Milwaukee
2:55 PM Question and Answer Period Functional Defects in Electroceramic Materials — 3:20 PM (PM) Outreach, Admission and Laboratory Experience: Outreach and Defect Design for Energy Storage Materials Program Organizers: Hui Xiong, Boise State University; Hua Zhou, Recruitment Activities of Undergraduate Materials Science and Engineering Argonne National Laboratory; Yanhao Dong, Massachusetts Institute of Students: Isabel Lloyd1; 1University of Maryland Technology 3:25 PM (PM) Outreach, Admission and Laboratory Experience: Comprehensive Monday PM November 2, 2020
Review in Graduate Admission – Implementation and First Outcomes: Wolfgang Windl1; 1Ohio State University 2:00 PM Invited 1 3:30 PM Design of Functional Decompositions for Solid State Batteries: Xin Li ; 1Harvard University (PM) Outreach, Admission and Laboratory Experience: Metallurgical Lab Experience through the Development of a Metal Additive Manufacturing 2:30 PM Invited Process: Ping-Chuan Wang1; 1SUNY New Paltz Energetic Compromise for Achieving “Redox-Site-Rich” in Pseudocapacitive 3:35 PM Question and Answer Period Energy Storage Materials: A Case Study of Nickel – aluminum Layered Double Hydroxides: Xianghui Zhang1; Cody Cockreham1; Su Ha1; Hongwu Xu2; 4:00 PM Panel Discussion: Preparing Students for the Materials Genome Di Wu1; 1Washington State University; 2Los Alamos National Laboratory Initiative Workforce – Moderator - Jeffrey Fergus, Auburn University; Panelists - 3:00 PM Michele Manuel, University of Florida; Wenhao Sun, University of Michigan; Structure and Energetics of Point Defects in Titanium Dioxide: Shuyan 1 1 1 1 and Katsuyo Thornton, University of Michigan Zhang ; Alan McGaughey ; Reeja Jayan ; Carnegie Mellon University
4:40 PM Panel Discussion: Workforce Development: Do Our Materials 3:20 PM Invited Science & Engineering Curricula Meet Workforce Needs? - Moderator Formation of Two-dimensional Heterointerface in Layered Oxides for 1 1 - Kester Clark, Colorado School of Mines; Panelists - Simona Hunyadi Improved Electrode Performance: Ekaterina Pomerantseva ; Drexel University Murph, Savannah River National Laboratory and Ashish Singh, Nucor Steel Arkansas 3:50 PM Thermodynamic Insights into Engineering 2D Nano-ceramics Towards Powering Portable Electronic Devices: Cody Cockreham1; Xianghui Zhang1; Environmentally Assisted Cracking: Theory and Gengnan Li1; Hongwu Xu2; Di Wu1; 1Washington State University; 2Los Alamos Practice — Investigating the Role of Hydrogen National Laboratory Program Organizers: Jenifer Locke, Ohio State University; Wenjun Cai, Virginia Polytechnic Institute and State University; Bai Cui, University of Nebraska-Lincoln; Srujan Rokkam, Advanced Cooling Technologies Inc; Glasses, Optical Materials, and their Functional Kaila Bertsch, University of Wisconsin-Madison Applications: Current Issues in Science & Technology Monday PM November 2, 2020 — Advanced Characterizations and Functional Applications
Program Organizers: Jincheng Du, University of North Texas; S. K. 2:00 PM Invited Sundaram, Alfred University Assessing the Influence of Hydrogen on The Deformation Behavior of a Precipitation-hardened Nickel-based Alloy: Zachary Harris1; Jishnu Monday PM November 2, 2020 Bhattacharyya1; Joseph Ronevich2; Sean Agnew1; James Burns1; 1University of Virginia; 2Sandia National Laboratories 2:00 PM Invited Glasses beyond Megabar Pressures: Sung Keun Lee1; 1Seoul National University
30 2:40 PM Invited Terahertz Time-domain Spectroscopy of Glasses: S. K. Sundaram1; 1Alfred High Temperature Corrosion and Degradation of University Structural Materials — Effects of Water Vapor/Ni-based 3:10 PM Alloys and High Temperature Effects Effect of Transition Metal Impurities on the Properties of ZnSe Single Program Organizers: Kinga Unocic, Oak Ridge National Laboratory; Raul Rebak, GE Global Research; David Shifler, Office of Naval Crystals: Brett Setera1; Charmain Su1; Fow-Sen Choa1; Bradley Arnold1; Ching Research; Richard Oleksak, National Energy Technology Laboratory Hua Su1; Shruti Singh1; Puneet Gill1; Kamdeo Mandal1; Ian Emge1; Narsingh Singh1; 1University of Maryland, Baltimore County Monday PM November 2, 2020
3:30 PM Development of YAG-alumina Composites for the Lightening Applications: 2:00 PM 1 1 1 1 1 Sekyung Chang ; Robert Kusner ; Fritz Grensing ; Wenbo Zhang ; Materion Influence of the Water Vapor on Oxide Scale and Alpha Case Layerin Corporation Ti6Al4V: Beyza Öztürk1; Lukas Mengis1; Mathias Galetz1; 1DECHEMA- Forschungsinstitut
High Entropy Materials: Concentrated Solid Solution, 2:30 PM Invited Intermetallics, Ceramics, Functional Materials and Thermochemical Stability of EBC Silicates in High-temperature High- 1 1 1 Beyond — Materials Discovery and Design II velocity Water Vapor: Mackenzie Ridley ; Elizabeth Opila ; University of Virginia Program Organizers: Xingbo Liu, West Virginia University; Michael Gao, National Energy Technology Laboratory; Peter Liaw, University of 3:00 PM Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, Metal Dusting of Ni-based Alloys at Elevated Pressure in Different Alfred University; Yu Zhong, Worcester Polytechnic Institute Gas Compositions: Clara Schlereth1; Mathias Galetz1; 1DECHEMA- Forschungsinstitut Monday PM November 2, 2020
3:20 PM The Effect of Surface Treatment on the Formation, Structure, and Chemistry 2:00 PM Invited of Protective Oxide Scale on High-temperature Oxidation-resistant Nickel Investigating Multi-principal-element Alloys (MPEAs) at Larger Scales: 1 1 1 1 1 1 Alloys: Stephen House ; Henry Ayoola ; John Lyons ; Meng Li ; Bingtao Li ; From Melt Processing to New Design Approaches: Martin Detrois ; Kyle 1 1 1 1 Rozman1; Michael Gao1; Paul Jablonski1; Jeffrey Hawk1; 1National Energy Judith Yang ; Wissam Saidi ; Brian Gleeson ; University of Pittsburgh Technology Laboratory
2:20 PM Invited Innovations in Refractory Ceramic Technology for Iron Electrodepositionof Nanocrystalline Medium and High-entropy Alloys: and Steel Applications — Innovations in Refractory Michel Haché1; Yu Zou1; 1University of Toronto Ceramic Technology for Iron and Steel Applications 2:40 PM Invited Program Organizers: James Hemrick, Reno Refractories Inc.; Josh The Use of CALPHAD Based Tools to Simulate Applications of HEA Pelletier, Imerys Aluminates Materials: Huahai Mao1; Lina Kjellqvist1; Paul Mason2; Qing Chen2; 1Thermo- Monday PM November 2, 2020 Calc Software AB; 2Thermo-Calc Software Inc.
3:00 PM Invited 2:00 PM Control of Discontinuous and Continuous Precipitation of Gamma-prime Aging of Refractory Castables: Joshua Sayre1; Margaret Raughley1; Jeffrey Strengthened High-entropy Alloys: Lei Fan1; Zengbao Jiao1; 1The Hong Kong Bogan1; 1HarbisonWalker International Polytechnic University
2:20 PM 3:20 PM New Refractory Solutions: Supporting Induction Melting Manufacturing Machine Learning and Data Analytics for Identification of HEA Compositions Challenges: Dana Goski1; Ryan Hershey1; Gary Hallum1; Benjamin Hunsicker1; and Processing Conditions Resulting in Enhanced Fatigue Resistance: Yuechu Ma1; 1Allied Mineral Products LLC Xuesong Fan1; Baldur Steingrimsson2; Orlando Rios3; Anand Kulkarni4; Duckbong Kim5; Peter Liaw; 1University of Tennessee; 2Imagars LLC; 3Oak 2:40 PM Ridge National Laboratory; 4Siemens Corporation; 5Tennessee Tech University Refractory Developments for BOF and Furnace Taphole Applications: Sean
Carden1; Keith Beale1; 1Vesuvius 3:40 PM Using alloy phase diagrams to predict formation of high-entropy alloy phases: Jie QI1; Mark Wischhusen2; Samuel Inman2; John Scully2; Sean Agnew2; S. Poon1; 1Department of Physics, University of Virginia; 2Department of Materials Science and Engineering, University of Virginia
31 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
3:00 PM Invited Integration between Modeling and Experiments for A Novel Equiatomic and Non-equiatomic Low-density High Entropy Alloys Crystalline Metals: From Atomistic to Macroscopic and Composites: Nandini Singh1; Yagnesh Shadangi1; Vikas Shivam1; Vivek Scales II — Session I Pandey1; Varalakshmi Somarauthu1; Nilay Mukhopadhyay1; 1Indian Institute of Program Organizers: Mariyappan Arul Kumar, Los Alamos National Technology (BHU) Varanasi Laboratory; Irene Beyerlein, University of California, Santa Barbara; Levente Balogh, Queen’s University; Josh Kacher, Georgia Institute of Technology; Caizhi Zhou, University of South Carolina; Lei Cao, Machine Learning for Discovery of Structure-Process- University of Nevada Property Relations in Electronic Materials — Machine Monday PM November 2, 2020 Learning in Materials Engineering II Program Organizers: B. Reeja Jayan, Carnegie Mellon University; Aarti
Singh, Carnegie Mellon University 2:00 PM Invited Bridging Computational Modeling and In Situ Experiment to Decipher Monday PM November 2, 2020 1 1 Microscopic Deformation Mechanics: Ting Zhu ; Georgia Institute of Technology 2:00 PM 2:30 PM Cycle Life Prediction of Lithium Ion Batteries Based on Data Driven Methods: Laisuo Su1; Mengchen Wu1; B. Jayan1; 1Carnegie Mellon University Ultra-high strength and plasticity mediated by partial dislocations and defect 1 2 1 2 networks: Ruizhe Su ; Dajla Neffati ; Yifan Zhang ; Yashashree Kulkarni ; 2:20 PM Xinghang Zhang1; Zhongxia Shang1; 1Purdue University; 2University of Houston Fast and Generalizable Detailed Router Using Attention-based Reinforcement 1 1 1 1 2:50 PM Learning: Haiguang Liao ; Levent Kara ; Qingyi Dong ; Xuliang Dong ; 1 2 3 3 1 Integrating Materials Models and Dynamical Electron Diffraction Wentai Zhang ; Wangyang Zhang ; Weiyi Qi ; Elias Fallon ; Carnegie Mellon 2 3 Simulations for Dislocation Analysis using STEM-Defect Contrast Imaging: University; Uber ATG; Cadence Design Systems Joseph Tessmer1; Mulaine Shih2; Yejun Gu3; Jafaar El-Awady3; Maryam Ghazisaeidi2; Marc De Graef1; 1Carnegie Mellon University; 2Ohio State University; 3Johns Hopkins University Materials Design through AI Composition and Process Optimization — Session I 3:10 PM Program Organizers: Noah Paulson, Argonne National Laboratory; Predicting the Stress Strain Behavior of Nickel Single Crystal Through an Tiberiu Stan, Northwestern University; Brandon Bocklund, Pennsylvania Integrated First-principles Calculation and Crystal Plasticity Finite Element State University; Arun Kumar Mannodi Kanakkithodi, Argonne National Modeling Approach: Shipin Qin1; Shun-Li Shang1; John Shimanek1; Zi-Kui Laboratory Liu1; Allison Beese1; 1Pennsylvania State University
Monday PM November 2, 2020 3:30 PM
ECCI Image Simulations for Arbitrary Defect Displacement Fields: Marcus Ochsendorf1; Joseph Tessmer1; Marc De Graef1; 1Carnegie Mellon University 2:00 PM Invited Realistic 3D Microstructure Generation via Generative Adversarial Networks: Elizabeth Holm1; Tim Hsu1; William Epting2; Hokon Kim1; Harry Light Metal and Composites Technology — Abernathy2; Gregory Hackett2; Anthony Rollett1; Paul Salvador1; 1Carnegie Mellon University; 2U.S. DOE National Energy Technology Laboratory Composites II: Development in Light Weight Alloys Program Organizers: Ramasis Goswami, Naval Research Laboratory; 2:25 PM Invited Xiaoming Wang, Purdue University; Alex Moser, U.S. Naval Research Artificial Intelligence for Material and Process Design: Marius Stan1; Noah Laboratory; Alan Luo, Ohio State University; Manoj Kolel-Veetil, Naval 1 1 2 1 1 Research Laboratory; Kumar Sadayappan, CanmetMATERIALS; Tanjore Paulson ; Debolina Dasgupta ; Jessica Pan ; Joseph Libera ; Argonne National Laboratory; 2Princeton University Jayaraman, University of Michigan-Dearborn 2:50 PM Monday PM November 2, 2020 Statistics-based Microstructural Digital Image Correlation Method for
Estimating Ex-situ Strain from Dissimilar Micrographs: Patxi Fernandez- 2:00 PM Invited Zelai1; Quinn Campbell1; Yousub Lee1; Michael Kirka1; Sebastien Dryepondt1; 1Oak Ridge National Laboratory Developments in Titanium Alloys for Aero-engine Applications: Ramachandra Canumalla1; 1Self Employed 3:10 PM Invited 2:20 PM Text and Data Mining for Materials Synthesis: Elsa Olivetti1; 1Massachusetts Institute of Technology Effect of Cu Content on Tensile and Low Cycle Fatigue Properties of Cast : Sumit Bahl1; Xiaohua Hu1; Jiahao Cheng1; Eric Hoar1; Al-Cu-Mn-Zr Alloys 3:35 PM Invited Kevin Sisco2; J. Allen Haynes1; Amit Shyam1; 1Oak Ridge National Laboratory; Deep Materials Informatics: Illustrative Applications of Deep Learning in 2University of Tennessee Materials Science: Ankit Agrawal1; 1Northwestern University
2:40 PM 4:00 PM Metastable f.c.c. Phase and Its Influence on the Soft-magnetic Properties of Machine Learning Prediction of Glass Properties Informed by Synthetic : Tanjore Jayaraman1; Ramasis Goswami2; FeCoNiAlxSix (0.2 < x < 0.5) Alloys Data: Kai Yang1; Mathieu Bauchy1; 1University of California, Los Angeles 1University of Michigan-Dearborn; 2Naval Research Laboratory
32 4:20 PM 3:00 PM Invited Learning Through Domain Knowledge: A Hierarchical Machine Learning Temperature-dependent Intermittent Plasticity of Nb Microcrystals: Quentin Approach Towards the Prediction of Thermoplastic Polyurethane Properties: Rizzardi1; Douglas Stauffer2; Jaime Marian3; Robert Maass1; 1University of Joseph Pugar1; Newell Washburn1; 1Carnegie Mellon University Illinois at Urbana-Champaign; 2Bruker Nano Surfaces; 3University of California, Los Angeles
Materials Informatics for Images and Multi- 3:20 PM Characterization of Dislocation Avalanches by In Situ Micropillar dimensional Datasets — Session I Compression Tests with Simultaneously Detected Acoustic Emission: David Program Organizers: Amanda Krause, University of Florida; Kristen Ugi1; Péter Ispánovity1; Michal Knapek2; Kristián Máthis2; Zoltán Dankházi1; Brosnan, General Electric Research; Alp Sehirlioglu, Case Western István Groma1; 1Loránd Eötvös University; 2Charles University Reserve University
Monday PM November 2, 2020 MS&T Student Events — PCSA Humanitarian Pitch Competition 2:00 PM Introductory Comments: Materials Informatics for Images and Multi- Monday PM November 2, 2020 dimensional Datasets: Amanda Krause1; 1University of Florida
2:05 PM Invited To be announced. Neural Networks and Community Driven Software for Scanning Transmission Electron Microscopy: James LeBeau1; 1MIT Next Generation Biomaterials — Next Generation 2:35 PM Biomaterials II Developing Granular Dielectrics Based on Reconstructed Micro-CT Images: 1 2 1 1 1 Program Organizers: Roger Narayan, University of North Carolina; Kevin Hager ; Christina Wildfire ; Edward Sabolsky ; Terence Musho ; West David Dausch, RTI International; Sanjiv Lalwani, Lynntech, Inc. Virginia University; 2National Energy Technology Laboratory
2:55 PM Monday PM November 2, 2020
Feature Characterization of Electron Backscatter Patterns from Rotating Lattice Single Crystals Using Machine Learning: Evan Musterman1; Joshua 2:00 PM Invited Agar1; Volkmar Dierolf1; Himanshu Jain1; 1Lehigh University Nanostructured Surface Bioactive Composite Scaffold for Filling of 1 3:15 PM Mandibular Bone Defects: A Pilot Study: Leonardo Ciocca ; Claudio Marchetti1; Achille Tarsitano1; 1University of Bologna Automated Optical Microscopy for Rapid Defect Screening: Andrew Kitahara1; Elizabeth Holm1; 1Carnegie Mellon University 2:20 PM Invited 3:35 PM 4D Printing of Advanced Scaffolds with Controlled Growth Factor Delivery for Tissue Engineering: Min Wang1; 1University of Hong Kong Assessment of the Ability of Laboratory Accelerated Corrosion Tests to Accurately Predict On-road Corrosion of 6xxx Al Alloys: Dadi Zhang1; 2:40 PM Invited Jayendran Srinivasan1; Jenifer Locke1; 1The Ohio State University 1 Creating Smart Biopolymer Fibers for Healthcare Applications: Ayda Afshar ; Mohan Edirisinghe1; 1University College London 3:55 PM Towards Smart Categorization of Growth Morphology by Machine Learning: 3:00 PM Invited Kimberly Gliebe1; 1Case Western Reserve University Stereolithographic Additive Manufacturing of Bioceramic Implants: Soshu Kirihara1; 1Osaka University
Micro- and Nano-Mechanical Behavior of Materials — 3:20 PM Invited New Materials for Medical Implants: Diamond: Kate Fox1; 1RMIT University Micro/Nano-Mechanics II Program Organizers: Sundeep Mukherjee, University of North 3:40 PM Invited Texas; Mahmoud Baniasadi, Georgia Southern University; Meysam Photopolymerization-Based 3D Printing of Medical Devices: Roger Narayan1; Haghshenas, University of Toledo 1University of North Carolina
Monday PM November 2, 2020 4:00 PM Invited Three High Entropy Alloys and their Ability to Control Biofilm Formation: Hideyuki Kanematsu1; David Kemény2; Eva Fazakas2; Attila Szabo3; Dana 2:00 PM Invited Barry4; Nobumitsu Hirai1; Akiko Ogawa1; Takeshi Kogo1; Noriyuki Wada1; Persistent, Inelastic Cycling Behavior in Rare Earth Orthophosphate Hidemi Nakamura5; Paul McGrath6; 1National Institute of Technology (KOSEN), Ceramics: Corinne Packard1; 1Colorado School of Mines Suzuka College; 2Budapest University of Technology and Economics; 3University 2:20 PM of Dunaújváros; 4Clarkson University/SUNY Canton; 5National Institute of Exploring Small-scale Quasicrystal Plasticity in Unknown Temperature Technology, Nara College; 6Clarkson University Regimes and Compositions: Changjun Cheng1; Yu Zou1; 1University of Toronto
2:40 PM Invited In Situ Nanomechanics of Ni-based Superalloys and Bond Coating: Effect of Temperature: Sanjit Bhowmick1; Eric Hintsala1; Douglas Stauffer1; 1Bruker
33 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:30 PM Keynote Phase Transformations in Additively Manufactured Influence of Powder Characteristics, Temperature and Cooling Rate on the Materials — Additive Manufacturing - Phase Development of the Properties in Ni-Superalloys Processed Using Powder Transformations - Modelling Hot Isostatic Pressing: Moataz Attallah1; Alessandro Sergi1; James MacDonald1; 1University of Birmingham Program Organizers: Antonio Ramirez, Ohio State University; Ashley Paz y Puente, University of Cincinnati; Matthew Steiner, University 3:00 PM Invited of Cincinnati; Vijay Vasudevan, University of Cincinnati; Bij-Na Kim, Hot Isostatic Pressing of Niobium-based Refractory Alloy Powders: Calvin Lancaster University/LPW Technology; Eric Lass, National Institute of 1 1 1 2 3 Standards and Technology Mikler ; Brian Welk ; Benjamin Georgin ; Todd Butler ; Noah Philips ; Hamish Fraser1; 1The Ohio State University; 2Air Force Research Laboratory; 3ATI Specialty Alloys and Components Monday PM November 2, 2020
3:20 PM 2:00 PM Invited Diffusion Behavior and Mechanical Properties of the Aluminum / Tungsten Phase Field Simulations of Cellular-to-Dendritic Transition under Metallic System: Ammar Alyasari1; Raghavan Srinivasan1; 1Wright State 1 1 University/ The Middle Technical University-Baghdad Additive Manufacturing Conditions: Younggil Song ; Steve DeWitt ; Bala Radhakrishnan1; John Turner1; 1Oak Ridge National Laboratory 3:40 PM 2:40 PM Deformation-free Refinement of Prior ß Grain Size in Powder Metallurgical Development of Non-equilibrium Thermodynamic Tools for Additive Titanium Alloys: Daniel Lewis1; James Paramore2; Brady Butler2; Griffin Turner1; 1 1 2 1 Trevor Hastings1; 1Texas A&M University; 2U.S. Army Research Laboratory Manufacturing: Kaisheng Wu ; Paul Mason ; Deepankar Pal ; Thermo-Calc Software Inc.; 2ANSYS Inc 4:00 PM 3:00 PM The Role of Processing and Texture on the Dynamic Mechanical Behavior Design of Post-fabrication Heat Treatments for Ti Free Grade 300 Maraging of Powder Metallurgy Processed Ti-6Al-4V: James Paramore1; Brady Butler1; Steel Manufactured Using Laser Powder Bed Fusion (LBPF) Process: Matthew Dunstan1; Hongjoo Rhee2; Haitham El Kadiri2; Wilburn Whittington2; Rangasayee Kannan1; Donovan Leonard1; Peeyush Nandwana1; 1Oak Ridge Shiraz Mujahid2; 1U.S. Army Research Laboratory; 2Mississippi State University National Laboratory
3:20 PM Processing and Performance of Materials Using Microstructure Engineering through Post-heat Treatment of Inconel 718 Microwaves, Electric and Magnetic Fields, Ultrasound, Superalloy Made by Laser Powder Bed Fusion: Yunhao Zhao1; Kun Li1; Noah Sargent1; Wei Xiong1; 1University of Pittsburgh Lasers, and Mechanical Work – Rustum Roy Symposium — Session II 3:40 PM Program Organizers: Morsi Mahmoud, King Fahd University of Rapid Solidification of Aluminium 6061 Using Fast Scanning DSC: Lakshmi Petroleum & Minerals; Dinesh Agrawal, Pennsylvania State University; Ravi Narayan1; Cain Hung1; Rainer Hebert1; 1Department of Materials Science Guido Link, Karlsruhe Institute of Technology; Motoyasu Sato, Chubu and Engineering, University of Connecticut University; Rishi Raj, University of Colorado
4:00 PM Monday PM November 2, 2020 Real-time Observation of the Competition between Ferritic vs Austenitic Solidification in Micro-laser Welding of 316L Using Synchrotron X-ray Diffraction: Joseph Aroh1; Seunghee Oh1; Benjamin Gould2; Andrew Chuang2; 2:00 PM Invited P. Pistorius1; Anthony Rollett1; 1Carnegie Mellon University; 2Argonne National Engineering Far-from-Equilibrium Materials Using Electromagnetic Fields: 1 1 1 1 1 Laboratory B. Reeja Jayan ; Nathan Nakamura ; Laisuo Su ; Shikhar Jha ; Carnegie Mellon University 4:20 PM Laser Powder Bed Fusion of Stainless Steel 15-5PH: Microstructure Analysis 2:30 PM Invited and Process Optimization: Cameron Lucas1; Nathalia Diaz Vallejo1; Holden The Use of Alternate Electromagnetic Fields to Control Biofilm: Hideyuki 1 2 1 2 3 Hyer1; Brandon McWilliams2; Kyu Cho2; Yongho Sohn1; 1University of Central Kanematsu ; Hidekazu Miura ; Ryota Tachi ; Runa Okada ; Dana Barry ; Stefan 4 1 1 1 1 Florida; 2US Army Research Laboratory Zimmerman ; Nobumitsu Hirai ; Akiko Ogawa ; Takeshi Kogo ; Noriyuki Wada ; Paul McGrath5; 1National Institute of Technology (KOSEN), Suzuka College; 2Suzuka University of Medical Science; 3Clarkson University/SUNY Canton; Powder Metallurgy of Light, Reactive and Other Non- 4Leibniz University, Hannover; 5Clarkson University ferrous Metals — Session I Program Organizers: Ma Qian, Royal Melbourne Institute of Technology; James Paramore, U.S. Army Research Laboratory; David Yan, San Jose State University
Monday PM November 2, 2020
2:00 PM Keynote By-products from Laser-material Interactions in Laser Powder Bed Fusion of Metal Powders: Aijun Huang1; Haopeng Shen1; Xinhua Wu1; 1Monash University
34 Sintering and Related Powder Processing Science and Synthesis, Characterization, Modeling and Technologies — Modelling and Processing-related Applications of Functional Porous Materials — Topics Functional Porous Materials II Program Organizers: Wolfgang Rheinheimer, TU Darmstadt; Ricardo Program Organizers: Lan Li, Boise State University; Winnie Wong-Ng, Castro, University of California, Davis; Zachary Cordero, Rice University; National Institute of Standards and Technology; Kevin Huang, University Eugene Olevsky, San Diego State University of South Carolina
Monday PM November 2, 2020 Monday PM November 2, 2020
2:00 PM 2:00 PM Invited Coarsening of Several Ceramic Particle Systems: Daniel Delia1; William An Overview of High-temperature Ceramic-carbonate Dual-phase Carty1; Hyojin Lee1; 1Alfred University Membranes for CO2 Capture and Conversion: Kevin Huang1; 1University of
South Carolina 2:20 PM Novel Low-temperature Copper Sintering Paste for Large-area Die 2:30 PM Invited Attachment at 200°C in Nitrogen Atmosphere: Hao Zhang1; Takanori Designing Multi-phase Reaction Pathways for CO2 Capture and Enhanced Kobatake1; Yasuyuki Akai1; Minoru Ueshima1; Katsuaki Suganuma1; 1Daicel H2 Production from Ca- and Mg-bearing Precursors to Produce Stable Corporation Porous Carbonates Using Cross-scale X-ray Scattering Measurements:
Greeshma Gadikota1; Tianhe Yin1; Xun Gao1; Ivan Kuzmenko1; 1Cornell 2:40 PM University The Effect of Cryogenic Milling and Parameters of Spark Plasma Sintering on Microstructure, Phase Composition and Mechanical Properties of 3:00 PM Invited Metastable Beta Titanium Alloy Ti-15Mo: Anna Veverkova1; Jirí Kozlík1; Surface Modified ScSZ-MC Dual-phase Membrane for Pre-combustion CO2 Kristína Bartha1; Cinthia Correa1; Tomáš Chráska2; Josef Stráský1; 1Charles Capture: Shichen Sun1; Kevin Huang1; 1University of South Carolina
University; 2Czech Academy of Sciences 3:30 PM Invited Porous Crystalline Porphyrinic Structures for Functional Materials 1 1 2 Substrate Protection for Corrosion Prevention — Applications: Lawrence Cook ; Greg Brewer ; Daniel Siderius ; Winnie Wong- Ng2; 1The Catholic University of America; 2National Institute of Standards and Substrate Protection for Corrosion Prevention II Technology Program Organizers: Mary Lyn Lim, PPG Industries; Cortney Crane, Exponent; Qixin Zhou, The University of Akron; Kylee Fazende, NSWC 4:00 PM Carderock Division; Raul Rebak, GE Global Research; Tushar Borkar, Hierarchical Porosity in \948-MnO2 Nanosheet Assemblies via Layer-tunnel Cleveland State University Conversion: Alec Ladonis1; Peter Metz1; Trevyn Hey1; Peng Gao1; Scott Misture1; 1Alfred University Monday PM November 2, 2020 4:20 PM Compositional Influence on Kirkendall Pore Formation during Fabrication 2:00 PM of Gamma Prime Strengthened Superalloy Microtubes: Haozhi Zhang1; 1 Corrosion Resistant Coatings on 6061 Aluminum: Jing Xu ; Rajeswaran Ashley Paz y Puente1; 1University of Cincinnati Radhakrishnan1; Cory Crowley2; Timothy Hall1; Jennings Taylor1; Maria Inman1; Stephen Snyder1; 1Faraday Technology Inc; 2Fermi National Lab 4:40 PM Highly Controlled and Steerable Porosity for Ceramic Structures via Freeze 2:20 PM Casting: Mert Arslanoglu1; Burak Ozdoganlar1; Rahul Panat1; 1Carnegie Mellon Effect of Surface Coating and PTFE Tape Insulation on Galvanic Corrosion University of AZ31B Bolt-joined with CFRP: Charles Warren1; Jiheon Jun1; Yong Chae Lim1; Zhili Feng1; 1Oak Ridge National Laboratory
2:40 PM MS&T20 Plenary Session — Improving the Corrosion Performance of Carbide-reinforced Martensitic ACerS Edward Orton, Jr. Memorial Lecture Steels via Adding Trace Cu: Kenta Yamanaka1; Chen Zhang1; Manami Mori2; Huakang Bian1; Akihiko Chiba1; 1Tohoku University; 2National Institute of Tuesday AM November 3, 2020
Technology, Sendai College 11:00 AM Introductory Comments: MS&T20 Plenary Session: Tatsuki Ohji1; 1National Institute of Advanced Industrial Science and Technology (AIST)
11:05 AM Plenary Additive Manufacturing: Disruptive Threat to Global Supply Chains and Enabler for Sustainable Development: Mritunjay Singh1; 1Ohio Aerospace Institute
11:45 AM Concluding Comments: MS&T20 Plenary Session: Tatsuki Ohji1; 1National Institute of Advanced Industrial Science and Technology (AIST)
35 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:40 PM 12th International Symposium on Green and A Process Parameter Prediction Framework for Metal Additive Sustainable Technologies for Materials Manufacturing Manufacturing: Praveen Sreeramagiri1; Ankit Roy1; Ganesh Balasubramanian1; 1Lehigh University and Processing — Sustainable Manufacturing of Ceramics II 3:00 PM Program Organizers: Surojit Gupta, University of North Dakota; Rajiv Feature Engineering for Surrogate Models of Consolidation Degree in Asthana, University of Wisconsin; Mritunjay Singh, Ohio Aerospace Additive Manufacturing: Mriganka Roy1; Olga Wodo1; 1University at Buffalo Institute; Tatsuki Ohji, AIST; Enrico Bernardo, University of Padova; Zhengyi Fu, Wuhan University of Technology; Hisayuki Suematsu, 3:20 PM Nagaoka University of Technololgy; Tatami Junichi, Yokohama national Multi-Fidelity Surrogate Assisted Prediction of Melt Pool Geometry in university; Yiquan Wu, Alfred University; Allen Apblett, Oklahoma State Additive Manufacturing: Nandana Menon1; Sudeepta Mondal1; Daniel Gwynn1; University Amrita Basak1; 1Pennsylvania State University
Tuesday PM November 3, 2020 3:40 PM Expanding Process Space of Laser Powder Bed Additive Manufacturing
Using Alternative Scan Strategies: Elizabeth Chang-Davidson1; Nicholas 2:00 PM Jones1; Jack Beuth1; 1Carnegie Mellon University Solid State Single Crystal Growth of YAG by SPS Sintering: Iva Milisavljevic1; Yiquan Wu1; 1Alfred University 4:00 PM
Design Optimization for Residual Stress in Complex Low-density Support 2:20 PM Invited Regions: Kevin Glunt1; Shawn Hinnebusch1; Owen Hildreth2; Wen Dong1; Xuan Microwave-assisted Synthesis of Lanthanide-based Nano- and Microscale Liang1; Florian Dugast1; Albert To1; 1University of Pittsburgh; 2Colorado School Materials: Ilias Halimi1; Nan Liu1; Nikita Panov1; Emille Rodrigues1; Eva of Mines Hemmer1; 1University of Ottawa
2:40 PM Microwave-assisted Pretreatment of Coal Fly Ash for Enhanced Recovery of Additive Manufacturing of Metals: Complex Rare-Earth Elements: Gunes Yakaboylu1; Daniel Baker1; Katarzyna Sabolsky1; Microstructures and Architecture Design — John Zondlo1; Christina Wildfire2; Edward Sabolsky1; 1West Virginia University; Microstructure and Mechanics in Metal AM 2US DOE-National Energy Technology Laboratory & Leidos Program Organizers: Yu Zou, University of Toronto; Hang Yu, Virginia Polytechnic Institute and State University
ACerS Frontiers of Science and Society — Tuesday PM November 3, 2020
Rustum Roy Lecture 2:00 PM Invited Tuesday PM November 3, 2020 Modeling of Grain Growth in Metal Printing: Tarasankar DebRoy1; Tuhin Mukherjee1; 1The Pennsylvania State University
1:00 PM Invited 2:40 PM Invited 1 1 Early Retrospectives from the Time of COVID: James Adair ; Pennsylvania Material Flow and Microstructure Evolution during Additive Friction Stir State University Deposition: Hang Yu1; 1Virginia Polytechnic Institute and State University
3:10 PM Invited Additive Manufacturing Modeling and Simulation: Complex Microstructures in Cold-spray Additive Manufactured Materials: Yu Zou1; 1University of Toronto AM Materials, Processes, and Mechanics — Additive Manufacturing Modeling and Simulation - Machine 3:40 PM Learning, Design and Optimization Cracking in Additively Manufactured Refractory Metals: Elizabeth Ellis1; Program Organizers: Jing Zhang, Indiana University – Purdue University Yousub Lee1; Michael Kirka1; 1Oak Ridge National Laboratory Indianapolis; Brandon Mcwilliams, US Army Research Laboratory; Li Ma, Johns Hopkins University Applied Physics Laboratory; Yeongil Jung, 4:00 PM Changwon National University Powder Bed Electron Beam Melting of Crack-prone Refractory Materials: Jameson Hankwitz1; Alex Helmer1; Chris Rock1; Mike Kirka2; Betsy Ellis2; Tuesday PM November 3, 2020 Michael Sprayberry2; Tim Horn1; 1North Carolina State University; 2Oak Ridge National Laboratory
2:00 PM Reduced-order Process-structure Linkages during Post-Process Annealing of an Additively Manufactured Ni-base Alloy: Andrew Marshall1; Surya Kalidindi1; Bala Radhakrishnan2; John Turner2; 1Georgia Institute of Technology; 2Oak Ridge National Laboratory
2:20 PM Phase Field Modeling of AM Solidification Microstructure with Algorithmic Feature Extraction to Facilitate Reduced Order Model Development: Stephen DeWitt1; Bala Radhakrishnan1; Yuanxun Bao2; George Biros2; Jean-Luc Fattebert1; John Turner1; 1Oak Ridge National Laboratory; 2University of Texas at Austin
36 Additive Manufacturing: Equipment, Instrumentation Additive Manufacturing: Mechanical Behavior of and Measurement — Session III Lattice Structures Produced via AM — Additive Program Organizers: Ulf Ackelid, Freemelt AB; Ola Harrysson, North Manufacturing of Lattices - Session III Carolina State University Program Organizers: John Carpenter, Los Alamos National Laboratory; Matthew Begley, University of California, Santa Barbara; Sneha Prabha Tuesday PM November 3, 2020 Narra, Worcester Polytechnic Institute; Michael Groeber, Ohio State University; Isabella Van Rooyen, Idaho National Laboratory; Kyle
Johnson, Sandia National Laboratories; Krishna Muralidharan, University 2:00 PM Invited of Arizona Real Time Monitoring of Electron Emissions during Electron Beam Powder Bed Fusion and Process Control for Arbitrary Geometries and Toolpaths: Tuesday PM November 3, 2020 1 1 1 Tim Horn ; Chris Rock ; North Carolina State University
2:40 PM 2:00 PM Invited A New Preheating Method for Electron Beam Powder Bed Fusion, Opening a Predicting Interfacial Cracking between Solid and Lattice Support Structure 1 1 Wider Range of Processable Feedstocks: Ulf Ackelid ; Martin Wildheim ; Philip during Laser Powder Bed Fusion Processing: Hai Tran1; Xuan Liang1; Albert 1 1 1 Nilsson ; Ulric Ljungblad ; Freemelt AB To 1; 1University of Pittsburgh
3:00 PM 2:30 PM Analysis of In-Situ, 3D Surround Digital Image Correlation with Mapped Residual Stress Mitigation in Lattice Structures Built by Laser Powder Bed 1 1 Thermography in Directed Energy Deposition: James Haley ; Samuel Leach ; Fusion: Anna Hayes1; Rachel Gorelik1; Krishna Muralidharan1; 1The University 1 1 1 1 Brian Jordan ; Ryan Dehoff ; Vincent Paquit ; Oak Ridge National Laboratory of Arizona
3:20 PM 2:50 PM Invited 1 Benefits of In-situ Monitoring in Metal Additive Manufacturing: Kevin Luo ; Predicting the Response of Additively Manufactured IN625 Thin-walled 1 FormAlloy Elements: Arunima Banerjee1; Sara Messina2; Jeff Rossin2; Edwin Schwalbach3; William Musinski3; Paul Shade3; Marie Cox3; Mo-Rigen He1; Tresa Pollock2; Matthew Begley2; Kevin Hemker1; 1Johns Hopkins University; 2University of Additive Manufacturing: Materials, Alloy Development, California, Santa Barbara; 3Air Force Research Laboratory/RXCM Microstructure and Properties — Additive Manufacturing of 316L Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of Additive Manufacturing: Qualification and Certification Technology; Zhi Wang, South China University of Technology; Jurgen — Process and Control Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, Program Organizers: Faramarz Zarandi, Raytheon Technologies; Jacob Norwegian University of Science and Technology Hochhalter, University of Utah; Douglas Wells, NASA / Marshall Space Flight Center; Richard Russell, NASA Kennedy Space Center; Mohsen Tuesday PM November 3, 2020 Seifi, ASTM International/Case Western Reserve University; Eric Ott, GE
Additive; Mark Benedict, Air Force Research Laboratory; Craig Brice, Colorado School Of Mines; J Hector Sandoval, Lockheed Martin 2:00 PM Microstructure Analysis of Laser Additive Manufactured 316L Stainless Tuesday PM November 3, 2020 Steel: Sudhakar Vadiraja1; Penn Rawn1; 1Montana Technological University
2:20 PM 2:00 PM Invited Grain Orientation Analysis of Additively Manufactured 316L Stainless Steel: Reducing Heat Buildup and Regularizing Melt Pool Dimensions in Laser Ann Choi1; Anthony Rollett1; 1Carnegie Mellon University Powder Bed Fusion through a “Powder Moat” Scan Strategy: Evan Diewald1; Christian Gobert1; Nicholas Jones1; Jack Beuth1; 1Carnegie Mellon University 2:40 PM Microstructure and Corrosion Characteristics of 316L Stainless Steel 2:30 PM Invited : Balachander Gnanasekaran1; Fabricated by Laser Powder Bed Fusion Process Ensuring Build Quality thru Physics-based Support Design Optimization for Yao Fu1; 1University of Cincinnati Residual Stress: Albert To1; Lin Cheng1; Qian Chen1; Xuan Liang1; 1University of Pittsburgh 3:00 PM Failure Evolution and Mechanisms in Additively Manufactured Stainless 3:00 PM Invited : Katie Koube1; Kaila Bertsch2; Steel 316L Under Dynamic Loading Conditions Unveiling the Relationships between Powder Bed Conditions and Materials Greg Kennedy1; Dan Thoma2; Josh Kacher1; Naresh Thadhani1; 1Georgia Institute Quality during Selective Laser Melting: Tan Phuc Le1; Matteo Seita1; 1Nanyang of Technology; 2University of Wisconsin - Madison Technological University
3:20 PM 3:20 PM Understanding The Influence of Porosity and Microstructure On Recyclability of Ti-6Al-4V Powders Used in Additive Manufacturing: Mechanical Behavior in Additive Manufactured 316L Stainless Steel Using Nicholas Derimow1; Nikolas Hrabe1; 1National Institute of Standards and In-situ X-ray Computed Tomography and Electron Microscopy: Aeriel Technology Murphy-Leonard1; David Rowenhorst1; Richard Fonda1; 1Naval Research Laboratory
37 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
3:40 PM CT Based Analysis of Generation and Characterization of Parameter- and Advanced Materials for Harsh Environments — Process-induced Defects in Powder Bed Fusion Additive Manufacturing: Session II Brett Diehl1; Abdalla Nassar1; David Corbin1; 1The Applied Research Laboratory Program Organizers: Navin Manjooran, Solve Technology and Research, Inc.; Gary Pickrell, Virginia Tech
Advanced Characterization of Materials for Nuclear, Tuesday PM November 3, 2020 Radiation, and Extreme Environments — Fusion
Materials & In-Situ Ion Irradiation Program Organizers: Samuel Briggs, Oregon State University; 2:00 PM Keynote Christopher Barr, Sandia National Laboratories; Emily Aradi, University AM Smart Components: Additively Manufactured Gas Turbine of Huddersfield; Michael Short, Massachusetts Institute of Technology; Components, with Embedded Sensors for Harsh Environment Applications: Janelle Wharry, Purdue University; Cheng Sun, Idaho National Ramesh Subramanian1; Jeff Brogan2; Navin Manjooran3; 1Siemens Energy Inc.; Laboratory; Dong Liu, University of Oxford; Khalid Hattar, Sandia 2Mesoscribe Technologies Inc.; 3Solve Technology and Research, Inc. National Laboratories 2:30 PM Invited Tuesday PM November 3, 2020 Processing, Stability, And High Temperature Properties of Transition
Metal Silicide-refractory Oxide Composites for Harsh Environment 1 1 2:00 PM Sensing Applications: Gunes Yakaboylu ; Katarzyna Sabolsky ; Rajalekshmi 1 2 1 1 Controlling Helium Morphology in Pure Metals: Effects of Helium Defects Chockalingam ; Tugrul Yumak ; Edward Sabolsky ; West Virginia University; 2 1 1 1 West Virginia University; Sinop University on Deformation and Strength: Calvin Lear ; Jonathan Gigax ; Nan Li ; Saryu Fensin1; 1Los Alamos National Laboratory 3:00 PM Invited 2:20 PM Versatile Acoustic and Optical Sensing Platforms for Passive Structural 1 1 1 1 Nanomechanical Change of Tungsten in ELM Conditions: Minsuk Seo1; Leigh System Monitoring: Daniel Homa ; Jaiji He ; Alexander Braatz ; Anbo Wang ; 1 1 Winfrey1; 1The Pennsylvania State University Gary Pickrell ; Virginia Tech
2:40 PM 3:30 PM 1 Modified stereo TEM for 3D analysis of defects: Benjamin Eftink ; Stuart Evaluation of Doped-LaCrO3 Ceramics for High Temperature Sensor 1 1 Maloy1; 1Los Alamos National Laboratory Applications: Javier Mena ; Kavin Sivaneri Varadharajan Idhaiam ; Gunes Yakaboylu1; Edward Sabolsky1; Katarzyna Sabolsky1; Konstantinos Sierros1; 3:00 PM Invited 1West Virginia University Fundamental In-situ Experiments Coupled to High-throughput Approaches to Understand Radiation Damage in FCC and BCC Compositionally Complex Alloys: Adrien Couet1; Michael Moorehead1; Calvin Parkin1; Mohamed Advanced Steel Metallurgy — Simulation & Modeling 1 1 2 3 3 Elbakhshwan ; Hongliang Zhang ; Chuan Zhang ; Meimei Li ; Wei-Ying Chen ; Program Organizers: Chirag Mahimkar, Big River Steel; Justin Raines, Lin Shao4; Dan Thoma1; Kumar Sridharan1; 1University of Wisconsin-Madison; SSAB Americas; Kip Findley, Colorado School of Mines; Alla Sergueeva, 2Computherm, LLC; 3Argonne National Laboratory; 4Texas A&M University NanoSteel Company Inc; Daniel Branagan, The NanoSteel Co
3:40 PM Tuesday PM November 3, 2020 Analysis of Heavy Ion Irradiation Damage in Commercially Pure Titanium and Titanium Alloys: Aida Amroussia1; Carl Boehlert1; Frederique Pellemoine2; Wolfgang Mittig3; David Grummon1; Thomas Bieler1; Clara Grygiel4; Meimei Li5; 2:00 PM Invited Wei-Ying Chen5; Isabelle Monnet4; 1Michigan State University; 2Faclity for Rare Modelling of Precipitation and Grain Growth in Ti-Nb Microalloyed Steels: Isotope Beam - Michgan State University; 3National Superconducting Cyclotron Alexis Graux1; Sophie Cazottes1; M. Perez1; M. Bugnet1; Damien Fabregue1; Laboratory - Michigan State University; 4CIMAP; 5Argonne National Laboratory 1Univ. Lyon, INSA Lyon, MATEIS, UMR CNRS 5510, F-69621
4:00 PM 2:20 PM In Situ Observation of Irradiation Damage in Polycrystalline Nuclear Modeling and Experimental Validation of the Precipitation Kinetics of Graphite: Dong Liu1; David Cherns1; Joshua Kane2; Weiying Chen3; Steve Vanadium Carbide in Austenitic Steel: Paul Lambert1; Daniel Bechetti1; Keith Jones4; Karthik Chinnathambi4; William Windes2; 1University of Bristol; 2Idaho Knipling2; Maya Nath1; Matthew Draper1; Charles Fisher1; 1Naval Surface National Laboratory; 3Argonne National Laboratory; 4Boise State University Warfare Center - Carderock Division; 2Naval Research Laboratory
38 2:30 PM Advances in Dielectric Materials and Electronic Effect of Hot Press Forming on Electrochemical Properties of Galvanized Steel: Jaime Jewer1; Joseph McDermid1; Joseph Kish1; 1McMaster University Devices — Dielectrics and Piezoelectrics: Session I Synthesis and Growth 3:00 PM Program Organizers: Amar Bhalla, University of Texas; Ruyan Guo, The Effect of Galvanizing Sheet Steel under SHS Conditions onthe University of Texas at San Antonio; Rick Ubic, Boise State University; Development of Steel Microstructures: Borys Sereda1; Dmytro Sereda1; Irina Danilo Suvorov, Jožef Stefan Institute Sereda1; 1Dneprovsky State Technical University
Tuesday PM November 3, 2020 3:30 PM
Reduction of the Internal and External Oxidation of the Charge during 1 1 2:00 PM Invited Galvanizing under SHS Conditions: Borys Sereda ; Dmytro Sereda ; 1 1 Dneprovsky State Technical University Structural Peculiarities of Epitaxial PMN-PT Thin Films: Matjaž Spreitzer ; Urška Gabor1; Jamal Belhadi1; Nina Daneu1; Danilo Suvorov1; 1Jozef Stefan 3:50 PM Institute Zinc Coating Control Using a New Integrated Indicator ECP-Zn: Borys 1 1 1 1 2:40 PM Sereda ; Dmytro Sereda ; Irina Kruglyak ; Dneprovsky State Technical University Novel Dielectrics, through [Ga, Ta] Dipolar-pair Substituted BaTiO3 Ceramics: Kaijie Ning1; Holly Shulman1; Steven Pilgrim1; Walter Schulze1; Steven Tidrow1; 1Alfred University Bulk and Sheet Thermal-Deformation Processing 3:00 PM and Microstructure Development in Metals – Plasma-assisted Epitaxy and Piezoelectric Behavior of AlN Films on 1 1 1 Characterization, Experiments and Modeling — c-Sapphire: Morton Greenslit ; Robert Lad ; Mauricio Pereira da Cunha ; Session II 1University of Maine Program Organizers: Daniel Coughlin, Los Alamos National Laboratory; 3:20 PM Kester Clarke, Colorado School of Mines; Piyush Upadhyay, Pacific Designing Electroceramics with Ferroelectric Grain Boundaries and Cold Northwest National Laboratory Sintering: Javier Mena Garcia1; Clive Randall1; Sinan Dursun1; Kosuke Tsuji1; Sun Hwi Bang1; 1Pennsylvania State University Tuesday PM November 3, 2020
2:00 PM Advances in Synthesis and Integration Methods for Probing Differences in Processing and Texture in FCC/BCC Nanolaminates Enhanced Properties, and Applications in Emerging Fabricated via Accumulative Roll Bonding: John Carpenter1; Thomas Nizolek1; Nanomaterials — Energy Materials I: Energy Storage Cody Miller1; Carl Osborne1; Rodney McCabe1; Daniel Coughlin1; 1Los Alamos National Laboratory Materials and Hybrid Perovskite Solar Cells Program Organizers: Chang-Yong Nam, Brookhaven National 2:30 PM Laboratory; Jung-Kun Lee, University of Pittsburgh; Zubaer Hossain, Continuum Dislocation Dynamics-based Modeling of the Strain Hardening University of Delaware Behavior of ECAPed Aluminum Alloy: Ali Kobaissy1; Georges Ayoub2; Mu’Tasem Shehadeh1; 1American University of Beirut; 2University of Michigan Tuesday PM November 3, 2020
2:50 PM 2:00 PM Invited Austenite Stability and Strain Localization in Q&P Steels Deformed at 1 1 1 Nanoscale Oxide Layers for Halide Perovskite Solar Cells: Jung-Kun Lee1; Dynamic Strain Rates: Christopher Finfrock ; Trevor Ballard ; Gus Becker ; 1 1 1 1 Seongha Lee1; Fen Qin1; Matthew Duff1; 1University of Pittsburgh John Copley ; Benjamin Ellyson ; Melissa Thrun ; Jonah Klemm-Toole ; Amy Clarke1; Kester Clarke1; 1Colorado School of Mines 2:30 PM Invited Polymer Additives for Stable Hybrid Perovskite Solar Cells: Chang-Yong Nam1; 1Brookhaven National Laboratory Ceramics in the Nuclear Fuel Cycle — Ceramics in the Nuclear Materials Program Organizers: Cory Trivelpiece, Savannah River National Advances in Zinc-coated Sheet Steel Processing and Laboratory; Kyle Brinkman, Clemson University; Philip Edmondson, Properties — Advances in Zinc-coated Sheet Steel Oak Ridge National Laboratory; Djamel Kaoumi, North Carolina State Processing and Properties University Program Organizers: Frank Goodwin, ILZRO; Joseph McDermid, McMaster University Tuesday PM November 3, 2020
Tuesday PM November 3, 2020 2:00 PM
Evaluation of the Corrosion of High Purity CVD SiC in Light Water Reactor 2:00 PM Keynote Environments: Peter Doyle1; Stephen Raiman2; Steven Zinkle1; 1University of Tennessee; 2Oak Ridge National Laboratory Role of Liquid Zn and a-Fe(Zn) on Liquid Metal Embrittlement Cracking of Resistance Spot Welded Medium Mn Steels: Yeongdo Park1; Siva Prasad Murugan1; Ji-Ung Kim1; Junsu Kim1; Ilguk Jo1; 1Dong-Eui University
39 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:20 PM First-principles Study on the Trapping and Recombination of Tritium Controlled Synthesis, Processing, and Applications 1 in Lithium Vacancy of the \947-LiAlO2 (100) Surface: Ting Jia ; David of Structural and Functional Nanomaterials — Energy Senor2; Yuhua Duan1; 1National Energy Technology Laboratory, United States Applications of Nanostructures Department of Energy; 2Pacific Northwest National Laboratory Program Organizers: Haitao Zhang, University of North Carolina at Charlotte; Gurpreet Singh, Kansas State University; Kathy Lu, Virginia 2:40 PM Tech; Edward Gorzkowski, Naval Research Laboratory ; Jian Shi, Nb and Ti Alloying Effects on the Phase and Oxidation of 3U Si2: Geronimo 1 2 1 1 Rensselaer Polytechnic Institute; Kejie Zhao, Purdue University ; Robles ; Joshua White ; Elizabeth Sooby Wood ; University of Texas at San Michael Naguib, Tulane University; Sanjay Mathur, University of Antonio; 2Los Alamos National Laboratory Cologne 3:00 PM Tuesday PM November 3, 2020 Radiolytic Damage and Hydrogen Generation at Carbide – Water Interfaces:
Simon Pimblott1; Jay LaVerne2; 1Idaho National Laboratory; 2University of Notre Dame 2:00 PM Invited
Panchromatic Light Absorption in CdSe/CdS Coated SnO2 Nanowires 3:20 PM for Solar-fuel Conversion: Salim Caliskan1; Jung-Kun Lee1; 1University of Thermophysical Properties of Sintered Yttrium Dihydride: Aditya Pittsburgh Shivprasad1; Vedant Mehta1; Joshua White1; Michael Cooper1; Tarik Saleh1; Joseph Wermer1; Erik Luther1; Holly Trellue1; D.V. Rao1; 1Los Alamos National 2:30 PM Laboratory Control Over Structure and Chemistry Across Multiple Lengthscales in Fe- Si-Ge-Based Thermoelectrics: Naiming Liu1; Mona Zebarjadi1; Jerrold Floro1; 1University of Virginia Coating and Thin Film Materials for Energy, Aerospace, Environment and Biological Applications — Advanced Coating and Thin Films Environmentally Assisted Cracking: Theory and Program Organizers: Jing Zhang, Indiana University – Purdue University Practice — EAC of Aluminum Alloys Indianapolis; Yeongil Jung, Changwon National University; Albert Program Organizers: Jenifer Locke, Ohio State University; Wenjun Cai, Feuerstein, Praxair Surface Technologies, Inc. (retired); Raymond Virginia Polytechnic Institute and State University; Bai Cui, University of Sinatra, Rolls-Royce Corporation (retired); Li Li, Rolls-Royce Corporation Nebraska-Lincoln; Srujan Rokkam, Advanced Cooling Technologies Inc; Kaila Bertsch, University of Wisconsin-Madison Tuesday PM November 3, 2020 Tuesday PM November 3, 2020
2:00 PM Rapid, Selective, Ambient Growth and Optimization of Copper Benzene- 2:00 PM Invited 1,3,5-Tricarboxylate (Cu-BTC) Metal-organic Framework Thin Films on a The Role of SCC in Corrosion Fatigue Kinetics of AA5456-H116: David Conductive Metal Oxide for Sensing Applications: Scott Crawford1; Ki-Joong Schrock1; Jenifer (Warner) Locke1; 1The Ohio State University
Kim1; Yang Yu1; Paul Ohodnicki1; 1National Energy Technology Laboratory 2:40 PM 2:20 PM Microstructure and Beta Phase Distribution Effects on Environmental Forming Al Tab to Cu Busbar Joints Using Low Pressure Cold Spray Fracture Susceptibility in Al-Mg Alloys: Matthew McMahon1; William Process: Volf Leshchynsky1; Roman Maev1; Thomas Brackett2; James Boileau2; Golumbfskie1; 1Naval Surface Warfare Center, Carderock Division
Brian Robert2; Emil Strumban1; 1IDIR; 2Ford 3:00 PM 2:40 PM Directional Sensitization Responses in 5XXX Series Aluminum Alloy Molecular Dynamics Simulation of Mechanical and Tribological Properties Microstructures: Likun Sun1; Matthew Steiner1; 1University of Cincinnati
of AlCoCrFe High Entropy Alloy Coatings on Aluminum Substrate: Xuehui 3:20 PM Yang1; Jian Zhang1; Dan Koo1; Bong-Gu Kim2; Heesung Park2; Yeon-Gil Jung2; Corrosion Fatigue Testing of AA7085-T7451 in Complex Atmospheric Jing Zhang1; 1Indiana University - Purdue University Indianapolis; 2Changwon Environments of Varied Humidity with Surface Salt Loading: Brandon Free1; National University Austin Burns2; Jason Niebuhr2; Sarah Galyon Dorman2; Jenifer Locke1; 1The 3:00 PM Ohio State Uniersity; 2SAFE Inc.
Modeling Ceramic Coating Removal Process Using Smoothed Particle 3:40 PM Hydrodynamics Method: Jian Zhang1; Sugrim Sagar1; Dan Koo1; Hyun-Hee Understanding Pitting Corrosion in a High-performance Aluminum Alloy Choi2; Yeon-Gil Jung2; Heesung Park2; Jing Zhang1; 1Indiana University - Purdue by 4D X-ray Microtomography: Daniel Sinclair1; Sridhar Niverty1; Nikhilesh University Indianapolis; 2Changwon National University Chawla1; 1Arizona State University 3:20 PM Aerosol Cold Spray and Sintering of Hydroxyapatite Coatings: Volf Leshchynsky1; Roman Maev1; Ahmed Elseddawy1; Emil Strumban1; Joanna Chojnacka1; Dariusz Garbiecz1; 1IDIR
3:40 PM Advanced Coatings for Passive Mitigation of Spacecraft Charging: Danny Liu1; Joshua Boman2; Matthew Lyle2; Dan Wang1; JR Dennison2; Timothy Hall1; Maria Inman1; 1Faraday Technology Inc; 2Utah State University
40 3:20 PM Glasses, Optical Materials, and their Functional Bond-order Bond Energy Model for Concentrated Solid Solutions: Szu-Chia Chien1; Christian Oberdorfer1; Wolfgang Windl1; 1Ohio State University Applications: Current Issues in Science & Technology — ACerS GOMD Alfred R. Cooper Award Session 3:40 PM Program Organizers: Jincheng Du, University of North Texas; S. K. Atomistic Simulations Evince the Sluggish Diffusion in Refractory HEAs: Sundaram, Alfred University Ankit Roy1; Joydeep Munshi1; Ganesh Balasubramanian1; 1Lehigh University
Tuesday PM November 3, 2020 4:00 PM Invited High Entropy and Sluggish Diiffusion Effects in Co-Cr-Fe-Ni Based High
Entropy Alloys: Abhishek Mehta1; Yongho Sohn1; 1University of Central Florida 2:00 PM Invited Cooper Distinguished Lecture: Exploring the Amorphous State of Matter by 4:20 PM Roaming About the Network Building Blocks: John Kieffer1; 1University of Effect of Grain Size and Strain Rate on the Deformation Mechanism of Michigan Nanocrystalline HEAs Using Molecular Dynamics Simulations: Ankit Roy1;
Ganesh Balasubramanian1; 1Lehigh University 2:40 PM Invited 2020 Alfred R. Cooper Young Scholar Award Presentation: Beyond the Average: A Statistical Mechanical Exploration of Topological Fluctuations in Glass-Forming Systems: Katelyn Kirchner1; 1Pennsylvania State University High Temperature Corrosion and Degradation of Structural Materials — Refractory Metal Alloys/ 3:20 PM Invited Modeling and Theory Effect of Nanoscale Phase Separation on the Fracture Behavior of Glasses: Program Organizers: Kinga Unocic, Oak Ridge National Laboratory; Toward Tough, Yet Transparent Glasses: Jared Rivera1; 1UCLA Department of Raul Rebak, GE Global Research; David Shifler, Office of Naval Civil and Environmental Engineering Research; Richard Oleksak, National Energy Technology Laboratory
3:50 PM Invited Tuesday PM November 3, 2020 Decoding Structure-Dynamics Correlations in SiO2 Supercooled Liquid by Machine Learning: Emily Li1; 1Materion Corporation 2:00 PM Invited Environmental Resistance and Microstructure Design in Mo-Si-B Alloys: John Perepezko1; 1University of Wisconsin-Madison High Entropy Materials: Concentrated Solid Solution, Intermetallics, Ceramics, Functional Materials and 2:30 PM Beyond — Theory and Fundamentals Effect of Al Addition on Oxidation Behavior of a New Mo-Si-B Alloy: Longfei Program Organizers: Xingbo Liu, West Virginia University; Michael Liu1; John Perepezko1; 1University of Wisconsin-Madison Gao, National Energy Technology Laboratory; Peter Liaw, University of Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, 2:50 PM Alfred University; Yu Zhong, Worcester Polytechnic Institute Elucidating Influence of Alloy Composition, Thermal Cycling and Environment on Oxidation Behavior of Engine Exhaust Valve Materials: Tuesday PM November 3, 2020 Rishi Pillai1; Marie Romedenne1; Allen Haynes1; Bruce Pint1; 1Oak Ridge National Laboratory
2:00 PM Invited 3:10 PM Lattice-distortion-enhanced-yield Strength in a Refractory High-entropy Machine Learning and Data Analytics for Accelerating High-temperature, Alloy: Chanho Lee1; Yi Chou2; George Kim3; Michael C. Gao4; Ke An5; Chuan Corrosion-resistant Materials Design: Xuesong Fan1; Baldur Steingrimsson2; Zhang6; Wei Chen3; Jonathan D. Poplawsky5; Gian Song7; Yi-Chia Chou2; Peter Anand Kulkarni3; Peter Liaw; 1University of Tennessee; 2Imagars LLC; Portland Liaw; 1University of Tennessee; 2National Chiao Tung University; 3Illinois State University; 3Siemens Corporation Institute of Technology; 4National Energy Technology Laboratory; 5Oak Ridge National Laboratory; 6Computherm, LLC; 7Kongju National University 3:30 PM Kinetic Modeling of High-temperature Oxidation of Pure Metals by 2:20 PM Invited Incorporating Wagner’s Theory into the CALPHAD Approach: Fangzhou Atomistic Modeling Predictions of the Structures and Properties of High Xing1; Sa Ma2; Yu Zhong1; Lijun Zhang2; 1Worcester Polytechnic Institute; Entropy Alloy Nanoparticles from Carbothermal Shock Synthesis: Guofeng 2Central South University Wang1; Zhenyu Liu1; 1University of Pittsburgh
2:40 PM Invited Phase Stability of CoCrFeMnNi High Entropy Alloy at Elevated Temperature and Pressure: Sitaram Aryal1; Lizhi Ouyang1; Michael Gao2; 1Tennessee State University; 2NETL
3:00 PM Rapid Production of Accurate Multicomponent Embedded-Atom Method Potentials for Metal Alloys: Elan Weiss1; Cosmin Safta2; Habib Najm2; David Riegner1; Logan Ward1; Wolfgang Windl1; 1The Ohio State University; 2Sandia National Laboratories
41 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:20 PM Integration between Modeling and Experiments for Composite Graphitization by Directing Interfacial Nanostructure Using Crystalline Metals: From Atomistic to Macroscopic Graphene: Randy Vander Wal1; Madhu Singh1; 1Penn State University Scales II — Session II Program Organizers: Mariyappan Arul Kumar, Los Alamos National Laboratory; Irene Beyerlein, University of California, Santa Barbara; Manufacturing and Processing of Advanced Ceramic Levente Balogh, Queen’s University; Josh Kacher, Georgia Institute Materials — New Opportunities in Ceramic Processing I of Technology; Caizhi Zhou, University of South Carolina; Lei Cao, Program Organizers: Bai Cui, University of Nebraska-Lincoln; Mike University of Nevada Alexander, Allied Mineral Products, Inc.; Eric Faierson, Quad City Manufacturing Laboratory - Western Illinois University; James Hemrick, Tuesday PM November 3, 2020 Reno Refractories Inc.; Keith DeCarlo, Blasch Precision Ceramics
Tuesday PM November 3, 2020 2:00 PM Invited
Twinning Nucleation in Hexagonal Close-packed Crystals: Yang He1; Zhengwu Fang1; Scott Mao1; 1University of Pittsburgh 2:00 PM Invited
Identifying Multidisciplinary Research Opportunities in Ceramic Processing: 2:30 PM Michael Bakas1; 1Army Research Office Twin Transmission Across Grain Boundaries in HCP Metals: Mariyappan Arul Kumar1; Rodney McCabe1; Laurent Capolungo1; Carlos Tome1; 1Los 2:40 PM Invited Alamos National Laboratory Fusion Welding of Structural Ceramics: William Fahrenholtz1; Greg Hilmas1;
Jeremy Watts1; 1Missouri University of Science and Technology 2:50 PM On the Characterization of Twin-twin Interactions in Mg and Its Alloys: 3:20 PM Invited Yanqing Su1; Irene Beyerlein2; 1Utah State University; 2University of California, Indirect Additive Manufacturing of Ceramics: David Bourell1; 1University of Santa Barbara Texas
3:10 PM 4:00 PM Directionally-anisotropic Mobility of Faceted Boundaries Explained through Laser Shock Processing of Silicon Carbide Ceramics: Fei Wang1; Xueliang Interfacial Dislocation Mechanisms: Megan McCarthy1; Timothy Rupert1; Yan 1; Chenfei Zhang1; Leimin Deng1; Yongfeng Lu1; Michael Nastasi1; Bai Cui1; 1University of California, Irvine 1University of Nebraska-Lincoln
Interfaces and Phase Transformations — Interfaces Materials Design through AI Composition and Process and Phase Transformation I Optimization — Session II Program Organizers: Arun Devaraj, Pacific Northwest National Program Organizers: Noah Paulson, Argonne National Laboratory; Laboratory; Matthias Militzer, University of British Columbia; Matthew Tiberiu Stan, Northwestern University; Brandon Bocklund, Pennsylvania Steiner, University of Cincinnati; Mohsen Zaeem, Colorado School of State University; Arun Kumar Mannodi Kanakkithodi, Argonne National Mines; Yufeng Zheng, University of Nevada, Reno Laboratory
Tuesday PM November 3, 2020 Tuesday PM November 3, 2020
2:00 PM Invited 2:00 PM Invited Localized Phase Transformation at Interfaces – A New Alloy Design Strategy: High-fidelity Accelerated Design of High-performance Electrochemical Longsheng Feng1; Ashton Egan1; Qianglong Liang1; Yipeng Gao2; Michael Mills1; Systems: Rachel Kurchin1; Alan Edelman2; Viral Shah3; Chris Rackauckas3; Bryce Yunzhi Wang1; 1Ohio State University; 2INL Meredig4; Venkat Viswanathan1; 1Carnegie Mellon University; 2Massachusetts
Institute of Technology; 3Julia Computing; 4Citrine Informatics 2:40 PM A Phase Field Dislocation Dynamics Model in Heterogeneous Crystalline 2:25 PM Invited Media: Shuozhi Xu1; Irene Beyerlein1; 1University of California, Santa Barbara Investigating Crystallographic Texture Control Using Laser Powder-bed Fusion Additive Manufacturing: Joseph Pauza1; Anthony Rollett1; 1Carnegie Mellon University Low Density Advanced Composite Materials — Low 2:50 PM Invited Density Advanced Composite Materials Multi-information Source Batch Bayesian Optimization of Alloys: Raymundo Program Organizers: Ioannis Mastorakos, Clarkson University; Brian Arroyave1; 1Texas A&M University Wisner, Ohio University; David Bahr, Purdue University 3:15 PM Tuesday PM November 3, 2020 Accelerating the Discovery of New DP-steel Using Machine Learning-based 1 2 Multiscale Materials Simulations: Abdallah Chehade ; Tarek Belgasam ; Georges Ayoub1; 1University of Michigan; 2University of Benghazi 2:00 PM Invited Effect of Battery Charge-discharge Cycles on the Mechanical Behavior of 3:35 PM Porous Polyethylene Separators: Mustapha Makki1; Georges Ayoub1; Cheol Using Machine Learning to Classify In Situ Monitored Melt Pool Surfaces Lee1; 1University of Michigan in a Powder Bed Fusion Process: Wei Xing1; Yu Zou1; 1University of Toronto
42 3:55 PM Machine-learning Prediction of Melting Temperature of Binary Alloys: Multiscale Modeling of Microstructure Deformation Pinwen Guan1; Venkat Viswanathan1; 1Carnegie Mellon University in Material Processing — Multiscale Modeling of Microstructure Deformation in Material Processing Program Organizers: Lukasz Madej, AGH University of Science and Materials Informatics and Modeling for 21st Century Technology; Jaimie Tiley, AFRL/RXLMD; Krzysztof Muszka, AGH Ceramics Research — Machine Learning for Materials University of Science and Technology; Danuta Szeliga, AGH University of Microstructure and Property Predictions Science and Technology Program Organizers: Ming Tang, Rice University; Jeffrey Rickman, Lehigh University; Turab Lookman, Los Alamos National Laboratory Tuesday PM November 3, 2020
Tuesday PM November 3, 2020 2:00 PM
Modeling Mechanical Response of Microtextured Regions in Hexagonal 1 2 3 3 2:00 PM Invited Metals: Joseph Tucker ; Sushant Jha ; Sean Donegan ; James Larsen ; Adam 3 1 2 3 Coarse-grained Equation-free Time Evolution of Microstructures with Deep Pilchak ; Exponent; University of Dayton Research Institute; Air Force Learning: Fei Zhou1; Ming Tang2; 1LLNL; 2Rice University Research Laboratory
2:30 PM Invited 2:40 PM Using Materials Informatics to Quantify Complex Correlations Linking Multiscale Approach to Model Deformation Behavior of Multilayered Sheets 1 1 Structure, Properties and Processing Produced by Explosive Cladding: Krzysztof Muszka ; Marcin Kwiecien ; 1 1 1 1 : Jeffrey Rickman1; 1Lehigh University Paulina Lisiecka-Graca ; Janusz Majta ; Konrad Perzynski ; Lukasz Madej ; 1AGH University of Science and Technology 3:00 PM Predicting Stress Hotspots in Polycrystalline Materials from Microstructural 3:00 PM Features Using Deep Learning: Ankit Shrivastava1; Hae Young Noh2; Kaushik The Research Thermoplastic Deformation Modes of Dual-phase Special 1 Dayal1; 1Carnegie Mellon University; 2Stanford University Alloys for Obtaining Rational Intermetallic Structure: Borys Sereda ; Dmytro Sereda1; Yuriy Belokon2; 1Dneprovsky State Technical University; 2ZNU
Micro- and Nano-Mechanical Behavior of Materials — Micro/Nano-Mechanics III Naval/Maritime Applications of Additively Program Organizers: Sundeep Mukherjee, University of North Manufactured Parts: Design and Experimental Texas; Mahmoud Baniasadi, Georgia Southern University; Meysam Approaches — Naval/Maritime Applications Haghshenas, University of Toledo of Additively Manufactured Parts: Design and Experimental Approaches Tuesday PM November 3, 2020 Program Organizers: Cindy Waters, Carderock Division Naval Surface
Warfare Center; Caroline Vail, Naval Surface Warfare Center, Carderock; 2:00 PM Invited Marc Zupan, University of Maryland Effects of Testing Temperature and Sample-size on Tensile Deformation of Tuesday PM November 3, 2020 Metallic Glass: Golden Kumar1; 1The University of Texas at Dallas
2:20 PM Invited Gradatim Ferociter: Exploring the Grain Size Stability of Heterogeneous 2:00 PM Introductory Comments: Naval/Maritime Applications of Additively Copper in Thermal, Mechanical and Radiation Environments 1 : Suveen Mathaudhu1; Heather Salvador1; Evander Ramos1; Sina Shahrezaei2; Manufactured Parts: Design and Experimental Approaches: Cindy Waters ; 1Carderock Division Naval Surface Warfare Center Khalid Hattar3; 1University of California, Riverside; 2Pacific Northwest National Laboratory; 3Sandia National Laboratories 2:05 PM Repeatability and Performance Prediction of Additively Manufactured 17-4 2:40 PM 1 2 3 2 1 Stainless Steel: Julianna Posey ; Michael Duffy ; Caroline Vail ; Marc Zupan ; In Situ Nanomechanical Testing of Piezoresistive Materials: Steven Boles ; 1 2 1Hong Kong Polytechnic University University of Maryland, Baltimore County ; University of Maryland, Baltimore County; 3University of Maryland, Baltimore County;Naval Surface Warfare Center, Carderock Division
MS&T Student Events — Young Professional Session 2:25 PM Additive Friction Stir Deposition for Naval/Maritime Applications: Mackenzie Tuesday PM November 3, 2020 Perry1; Hang Yu1; 1Virginia Polytechnic Institute
2:45 PM 3:00 PM Panel Discussion - Panelists include: Charmayne Lonergan, Pacific Additive Manufacturing of a Lifeboat Hook System with a Functionally Northwest National Lab; Scott McCormack, University of California, Davis; Dynamic Mechanism: Ulanbek Auyeskhan1; Namhun Kim2; Van Loi Tran1; Abby Cisko, Engineer Research & Development Center (Army); Andrew Eunhei Cho1; Dong-Hyun Kim1; 1KITECH; 2Ulsan National Institute of Science Baker, Boeing; Liz Hunter, Nucor; and David Kober, IBA America and Technology
43 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
3:05 PM Direct Tension and Fatigue Characterization of AM Ti-6Al-4V Defects: A Synthesis, Characterization, Modeling and Microsample Approach: Joao Santos1; Michael Duffy1; Steven Storck2; Marc Applications of Functional Porous Materials — Zupan1; 1University of Maryland, Baltimore County; 2University of Maryland, Functional Porous Materials III Baltimore County; The Johns Hopkins Applied Physics Lab Program Organizers: Lan Li, Boise State University; Winnie Wong-Ng, National Institute of Standards and Technology; Kevin Huang, University of South Carolina Next Generation Biomaterials — Next Generation Biomaterials III Tuesday PM November 3, 2020
Program Organizers: Roger Narayan, University of North Carolina; David Dausch, RTI International; Sanjiv Lalwani, Lynntech, Inc. 2:00 PM Invited Crystallinity Effect on Mesoporous TiO2 Nanoparticle Negative Electrode Tuesday PM November 3, 2020 Material for Metal Ion Batteries: Hui Xiong1; Changjian Deng1; Paige Skinner1;
Yuzi Liu2; Wenqian Xu2; Hua Zhou2; Xianghui Zhang3; Di Wu3; Yadong Yin4; 2:00 PM Yang Ren2; 1Boise State University; 2Argonne National Laboratory; 3Washington Optimizing Bicontinuous Structure of Bijels-derived Polymer-hydrogel State University; 4University of California - Riverside
Hybrids for the Controlled Release of Different Cells: Haoran Sun1; Min 2:30 PM Wang1; 1University of Hong Kong Low/Intermediate Temperature Polysiloxane Derived Ceramics with 2:20 PM Invited Increased Carbon for Electrical Applications: Michelle Greenough1; Zeyu Decellularized Lucky Bamboo (Dracaena sanderiana) Scaffolds for Bone Zhao1; Jianhua Tong1; Luiz Jacobsohn1; Rajendra Bordia1; 1Clemson University
Tissue Engineering: Ali Salifu1; Joshua Gershlak1; John Obayemi1; Vanessa 2:50 PM Uzonwanne1; Glenn Gaudette1; Winston Soboyejo1; 1Worcester Polytechnic The Influence of Yttria Content and Synthetic Parameters on the Thermal Institute Stability of Yttria-stabilized Zirconia Aerogels: Nathaniel Olson1; Frances 2:40 PM Invited Hurwitz2; Haiquan Guo3; Richard Rogers2; Jessica Krogstad1; 1University of Diamond-like Carbon Thin Films for an Improved Surgical Field of View: Illinois Urbana Champaign; 2NASA Glenn Research Center; 3Ohio Aerospace Anna Bull1; Jackson Mayfield1; Adam Evans1; Russell Leonard1; Jacqueline Institute Johnson1; 1University of Tennessee Space Institute
3:00 PM Thermodynamics of Materials in Extreme Mechanical Behavior of Resilin-mimicking Materials: Annaliza Perez-Torres1; Fuqian Yang1; 1University of Kentucky Environments — Thermodynamic Studies of Nuclear Materials Program Organizers: Xiaofeng Guo, Washington State University; Probabilistic Life Prediction of Materials in Aging Kristina Lilova, Arizona State University; Kyle Brinkman, Clemson University; Alexandra Navrotsky, Arizona State University; Jake Systems — Probabilistic Life Prediction of Materials in Amoroso, Savannah River National Laboratory; Xingbo Liu, West Virginia Aging Systems University; Gustavo Costa, NASA Glenn Research Center Program Organizers: Narasi Sridhar, OSU; Raul Rebak, GE Global Research Tuesday PM November 3, 2020
Tuesday PM November 3, 2020 2:00 PM Invited Thermochemical Modeling of Molten Salt Systems for Reactors and 2:00 PM Invited Simulations with the Molten Salt Thermodynamic Database: Theodore Increasing Operation Life of Light Water Reactors by using Accident Besmann1; Kaitlin Johnson1; Johnathan Ard1; Jacob Yingling1; Matthew Tolerant Fuels: Raul Rebak1; 1GE Global Research 1 1 2 3 1 Christian ; Juliano Schorne Pinto ; Jacob McMurray ; Markus Piro ; University of South Carolina; 2Oak Ridge National Laboratory; 3Ontario Tech 2:30 PM Mechanistic and Engineering-Scale Modeling of the Effect of High-altitude 2:30 PM Environments on the Structural Integrity of Airframe Components: James Effect of Physically Determined Coordination-numbers for Modeling Molten Burns1; 1University of Virginia Salt Fuels Using the Modified Quasi-chemical Model (MQM): Matthew 1 1 1 2 3 2:55 PM Invited Christian ; Juliano Pinto ; Theodore Besmann ; Timothy Lynch ; Wilson Chiu ; 4 4 1 2 Probabilistic Life-cycle Decision Optimization with Bayesian Networks for Nancy Birkner ; Kyle Brinkman ; University of South Carolina; University of 3 4 1 Connecticut ; University of Connecticut; Clemson University Aging Fixed Equipment and Piping in the Energy Industries: Aaron Stenta ; Charles Panzarella1; 1The Equity Engineering Group 2:50 PM 3:15 PM The LiF–ZrF4 System Revisited - An Updated Thermodynamic Description 1 1 Probabilistic Prediction of Stress Corrosion Cracking of Oil & Gas Pipelines Using New Information Data: Juliano Schorne Pinto ; Matthew Christian ; 2 2 1 1 Using Bayesian Network: Narasi Sridhar1; Francois Ayello2; 1OSU; 2DNVGL Timothy Lynch ; Wilson Chiu ; Theodore Besmann ; University of South Carolina; 2University of Connecticut
3:10 PM Thermodynamic Modelling of Vacancies in Zirconium Carbide: Theresa Davey1; Ying Chen1; 1Tohoku University
44 12th International Symposium on Green and Additive Manufacturing of Ceramics and Ceramic Sustainable Technologies for Materials Manufacturing Composites: Materials Properties, Processes, and and Processing — Sustainable Manufacturing from Modeling — Additive Manufacturing of Ceramics and Metal and Ceramics based Precursor Materials Ceramic Composites: Materials Properties, Processes, Program Organizers: Surojit Gupta, University of North Dakota; Rajiv and Modeling Asthana, University of Wisconsin; Mritunjay Singh, Ohio Aerospace Program Organizers: Xiangyang Dong, Missouri University of Science Institute; Tatsuki Ohji, AIST; Enrico Bernardo, University of Padova; and Technology; William Headrick, RHI Magnesita; James Hemrick, Zhengyi Fu, Wuhan University of Technology; Hisayuki Suematsu, Reno Refractories Inc.; Eric Faierson, Quad City Manufacturing Nagaoka University of Technololgy; Tatami Junichi, Yokohama national Laboratory; Keith DeCarlo, Blasch Precision Ceramics university; Yiquan Wu, Alfred University; Allen Apblett, Oklahoma State University Wednesday AM November 4, 2020
Wednesday AM November 4, 2020 8:00 AM
Additive Manufacturing of Hybrid Silicon Carbide/Carbon Fiber Nano- 8:00 AM Invited composites: Saja Al-ajrash; Charles Browning1; 1University of Dayton Amino Acid-based Single Source Precursors for Bimetallic Molybdates: Allen Apblett1; Fahad Alqahtani1; 1Oklahoma State University 8:20 AM
Additive Manufacturing of Miniaturized RFID Tag Using Electroceramic 8:40 AM Materials for High Temperature Wireless Sensing Applications: Kavin Development of a Separation Process of NBR/HNBR Rubber from Metal 1 1 1 1 2 1 2 Sivaneri Varadharajan Id ; Domenic Cipollone ; Katarzyna Sabolsky ; Edward Substrate: Sarah Scardelatto ; Mariana Nascimento ; Zanaflex; Fundação Sabolsky1; Konstantinos Sierros1; Daryl Reynolds1; 1West Virginia University Santo André
8:40 AM 9:00 AM Invited 1 1 Additive Manufacturing of Novel PZT Piezocomposite Structures: Shawn Ceramics for the Circular Economy: Monica Ferraris ; Milena Salvo ; Elham Allan1; Barry Robinson2; Alex Angilella3; Justin Tufariello3; Leslie Riesenhuber3; Sharifikoloui1; 1Politecnico di Torino – Italy Brian Pazol2; 1Lithoz America LLC; 2MSI Transducers Corp; 3The MITRE Corporation 9:40 AM Conditions for electrolytic reduction of titanium from binary mixed-oxide 9:00 AM : Catherine Bishop1; Nic Weaver1; Samuel Martin-Treceno1; Aaron Marshall1; melt Effect of Carbon Concentration from Phenolic PIP on the Fabrication Matthew Watson1; 1University of Canterbury and Thermal- Mechanical Properties of SiC Composites by Additive Manufacturing and Reactive Silicon Melt Infiltration: Corson Cramer1; Edgar Lara-Curzio1; Amy Elliott1; Christina Padilla1; Alexis Flores-Betancourt1; Derek Additive Manufacturing Modeling and Simulation: Siddel1; Kashif Nawaz1; 1Oak Ridge National Laboratory AM Materials, Processes, and Mechanics — Additive Manufacturing Modeling and Simulation - Online 9:20 AM Process Monitoring, Non-mechanical Property Fundamental Studies of Tritium Diffusivity in Irradiation Defective LiAlO2 Characterization and Li2ZrO3: A Frist Principles Density Function Theory Study: Hari Paudel1; Yuhua Duan1; 1National Energy Technology Laboratory Program Organizers: Jing Zhang, Indiana University – Purdue University Indianapolis; Brandon Mcwilliams, US Army Research Laboratory; Li 9:40 AM Ma, Johns Hopkins University Applied Physics Laboratory; Yeongil Jung, Mechanical Characterization of SLA Printed Silica Lattice Structures: Changwon National University Bhargavi Mummareddy1; Jose Carrillo-Baeza1; Pedro Cortes1; 1Youngstown State University Wednesday AM November 4, 2020 10:00 AM
Process Development for the Selective Laser Melting of Tungsten Carbide- 8:00 AM Nickel Matrix Composites: Edgar Mendoza1; Baby Reeja-Jayan1; Jack Beuth1; In-situ Monitoring of Powder Flow in Direct Energy Deposition Additive 1Carnegie Mellon Univ Manufacturing: Baily Thomas1; Abdalla Nassar1; Steve Brown1; Matthew Milanek1; Jason Scherer1; 1Penn State University
8:20 AM Additive Manufacturing of Metals: Complex Property Measurements for Modeling the Process-structure-property Microstructures and Architecture Design — Relationships in Additive Manufacturing: Gwendolyn Bracker1; Madeline Microstructure Evolution and Control Scott1; Elizabeth Hodges1; Michael SanSoucie1; Robert Hyers1; 1University of Program Organizers: Yu Zou, University of Toronto; Hang Yu, Virginia Massachusetts Polytechnic Institute and State University
8:40 AM Wednesday AM November 4, 2020 Control of High-temperature Drop-on-demand Metal Jetting through Numerical Modelling and Experimentation: Negar Gilani1; Nesma Aboulkhair1; Marco Simonelli1; Ian Ashcroft1; Richard Hague1; 1University of 8:00 AM Invited Nottingham Alloy and Process Modification for Microstructure Control in Additively Manufactured Alloys: Christian Leinenbach1; Seth Griffiths1; Anthony De Luca1; Ariyan Arabi-Hashemi1; 1Empa, Swiss Federal Laboratories for Materials Science and Technology
45 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:30 AM Invited Engineering the Plasticity of SLM Steel via Crystallographic Texture Control: Additive Manufacturing: Materials, Alloy Development, Sudarshan Raman1; Karl Sofinowski1; Matteo Seita1; 1Nanyang Technological Microstructure and Properties — Additive University Manufacturing of Al- and Ti-based Alloys 9:00 AM Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of Technology; Zhi Wang, South China University of Technology; Jurgen Small Scale Characterization of Additively Manufactured NiTi: Minhazul Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, Islam1; Parisa Bayati1; M Nematollahi1; Mohammad Elahinia1; Meysam Norwegian University of Science and Technology Haghshenas1; 1University of Toledo
9:20 AM Wednesday AM November 4, 2020
Microstructure of Alloy 247LC Manufactured by Laser Powder Bed 1 1 1 1 Fusion: Olutayo Adegoke ; Joel Andersson ; Robert Pederson ; Håkan Brodin ; 8:00 AM Invited 1University West Additive Manufacturing of Metallic Materials: Mechanical Properties: Prashanth Konda Gokuldoss1; 1Tallinn University Of Technology 9:40 AM 1 Evaluation of Microstructure in Multi Bead Ti-6Al-4V: Amaranth Karra ; Ali 8:20 AM 1 1 1 1 1 Guzel ; Hangman Chen ; Amit Kumar Verma ; Anthony D. Rollett ; Carnegie Microstructural Evolution and Mechanical Properties of Cast and Additive Mellon University Manufactured AlSi10Mg at Different Heat-treated Conditions: Shawkat Imam1; Ahmed Paridie1; Meysam Haghshenas1; 1University of Toledo
Additive Manufacturing: Alloy Design to Develop New 8:40 AM Microstructure and Mechanical Property of Additively Manufactured Zr- Feedstock Materials — Session I 1 1 1 Program Organizers: Joseph McKeown, Lawrence Livermore National modified AA6061 Alloy: Le Zhou ; Abhishek Mehta ; Holden Hyer ; Thinh 1 1 2 2 2 Laboratory; Aurelien Perron, Lawrence Livermore National Laboratory; Huynh ; Sharon Park ; Devin Imholte ; Nicolas Woolstenhulme ; Daniel Wachs ; Yongho Sohn1; 1University of Central Florida; 2Idaho National Laboratory Manyalibo Matthews, Lawrence Livermore National Laboratory; Christian Leinenbach, Empa, Swiss Federal Laboratories for Materials Science 9:00 AM and Technology; Peter Hosemann, University of California Toward In-Situ Flaw Detection in Laser Powder Bed Fusion Additive 1 1 1 1 Wednesday AM November 4, 2020 Manufacturing: Brett Diehl ; Zackary Snow ; Abdalla Nassar ; Edward Reutzel ; 1 Applied Research Laboratory, Pennsylvania State University
8:00 AM Invited 9:20 AM High-Throughput Accelerated Alloy Development: Kenneth Vecchio1; Olivia Mapping Relationships between Process Parameters, Microstructure, and 1 1 Dippo1; 1University of California, San Diego Properties for Wire Feed – DED of Ti-6Al-4V: Ze Geng ; Zhening Yang ; Ali Guzel1; Amit Verma1; Anthony Rollett1; 1Carnegie Mellon University 8:30 AM Invited Accidental Alloy Development: In-situ Evolution of AM Powder and Opportunities for New Material Synthesis Pathways: Tim Horn1; Chris Rock1; Additive Manufacturing: Microstructure and Material 1North Carolina State University Properties of Titanium-based Materials — Titanium 9:00 AM Alloy Microstructure and Properties Characterization of Spatter with Organized Features in Laser Powder Bed Program Organizers: Ulf Ackelid, Freemelt AB; Ola Harrysson, North Fusion: Christopher Rock1; Tim Horn1; 1North Carolina State University Carolina State University; Peeyush Nandwana, Oak Ridge National Laboratory; Rongpei Shi, Lawrence Livermore National Laboratory; 9:20 AM Invited Yufeng Zheng, University of Nevada, Reno Optimization of Nitrogen-Atomized 17-4 Stainless Steel Feedstock for AM Processing: Carelyn Campbell1; James Zuback1; Mark Stoudt1; 1National Wednesday AM November 4, 2020 Institute of Standards and Technology
9:50 AM 8:00 AM Sensitivity Analysis and Composition Design for Metal Additive Correlating Processing, Structure and Properties for Additively Manufacturing Using CALPHAD-based ICME Framework: Xin Wang1; Manufactured Ti-6Al-4V: Jayme Keist1; Selda Nayir1; Todd Palmer1; Soumya Sridar1; Wei Xiong1; 1University of Pittsburgh 1Pennsylvania State University
10:10 AM Invited 8:40 AM Laser Additive Manufacturing of Nanocomposite Powders: Bilal Gökce1; Study of Effects from Post-processing on the Fatigue Performances of Stephan Barcikowski1; 1University of Duisburg-Essen Laser Powder Bed Fusion Built Parts Using Hydride-dehydride Ti-6Al-4V
Powders: Ziheng Wu1; Amir Mostafaei2; Nihal Sivakumar1; Anthony Rollett1; 10:40 AM 1Carnegie Mellon University; 2Illinois Institute of Technology Residual Stress Mitigation of Additive Manufactured Stainless Steel 316L Components through the Directed Energy Deposition Inclusion of TiC 9:00 AM Nanoparticles: Jakob Hamilton1; Samantha Sorondo1; Andrew Greeley1; Denis Mechanical properties, fracture surface and microstructure of additively Cormier1; Iris Rivero1; 1Rochester Institute of Technology manufactured Ti6Al4V: Asif Mahmud1; Thinh Huynh1; Le Zhou1; Devin Imholte2; Nicolas Woolstenhulme2; Daniel Wachs2; Yongho Sohn1; 1University of Central Florida; 2Idaho National Laboratory
46 9:20 AM Environmental Degradation of AM-fabricated Ti6Al4V Alloy: Guy Ben- Advanced Coatings for Wear and Corrosion Protection Hamu1; 1Sami Shamoon College of Engineering — Advanced Coatings for Wear and Corrosion 9:40 AM Protection I Multiscale Mechanical Studies of Dual-phase Titanium Alloys Made by Program Organizers: Evelina Vogli, Lm Group Holdings Inc.; Fei Tang, DNV GL Additive Manufacturing: Zhiying Liu1; Yu Zou1; 1University of Toronto
10:00 AM Wednesday AM November 4, 2020 Study the Effect of Thermal Gradients on the Microstructure and Mechanical
Properties of Electron Beam Melting Ti-6Al-4V Builds: Meiyue Shao1; Sriram 8:00 AM Vijayan1; Evan Hass1; Kayla Hepler1; Joerg Jinschek1; 1The Ohio State University Improved Coating Performance of REACH Compliant Trivalent Chromium Plating Process for Functional Applications: Andrew Moran1; Rajeswaran Radhakrishnan1; Kamyar Ahmadi2; Timothy Hall1; Stephen Snyder1; Tony Oriti3; Advanced Characterization of Materials for Nuclear, Mark Feathers4; Michael Johnson4; George Bokisa3; Jennings Taylor1; Maria Radiation, and Extreme Environments — Radiation Inman1; Stanko Brankovic2; Jing Xu1; 1Faraday Technology Inc; 2University of Effects & Materials Mechanics Houston; 3Coventya Inc; 4U.S. Army Aviation and Missile Command Program Organizers: Samuel Briggs, Oregon State University; Christopher Barr, Sandia National Laboratories; Emily Aradi, University 8:20 AM of Huddersfield; Michael Short, Massachusetts Institute of Technology; The Surface Integrity of Hard Coatings and Surface Treatments on Alloy 17- Janelle Wharry, Purdue University; Cheng Sun, Idaho National 4PH in Highly Soured Environments: Manuel Marya1; Dean Lauppe1; Virendra Laboratory; Dong Liu, University of Oxford; Khalid Hattar, Sandia Singh1; 1Schlumberger National Laboratories 8:40 AM Wednesday AM November 4, 2020 High Performance Amorphous Based Thermal Sprayed Coatings for Molten Salt Environment: Evelina Vogli1; John Kang1; Rick Salas1; 1Lm Group Holdings Inc. 8:00 AM Benefits of Using High Energy Ions in Ion Irradiation Experiments to 9:00 AM Evaluate Void Swelling: Peter Doyle1; Takaaki Koyanagi2; Steven Zinkle1; Electrochemical Corrosion Behaviors of Nitrogen-enriched Stainless 1University of Tennessee; 2Oak Ridge National Laboratory Steels and High Chromium White Irons: Virendra Singh1; Manuel Marya1; 1Schlumberger 8:20 AM Swelling of Nuclear Reactor Steels: Modeling, Theory, and Accelerated 9:20 AM Testing: Michael Fluss1; Edward Moses2; 1Nuclear Materials Consultancy; Production of Chromium-aluminized Coatings to Protect Against Wear and 2Longview Consulting, Inc. Corrosion: Borys Sereda1; Dmytro Sereda1; Irina Kruglyak1; 1Dneprovsky State Technical University 8:40 AM Response of an Additively Manufactured 316 Stainless Steel Subjected to High Temperature Heavy Ion Irradiations: Zhongxia Shang1; Cuncai Fan2; 1 1 3 4 1 3 Advanced Manufacturing, Processing, Jie Ding ; Sichuang Xue ; Adam Gabriel ; Thomas Voisin ; Jin Li ; Lin Shao ; Characterization and Modeling of Functional Yinmin Wang4; Haiyan Wang1; Xinghang Zhang1; 1Purdue University; 2Oak Ridge National Laboratory; 3Texas A&M University; 4Lawrence Livermore Materials — Advanced Manufacturing, Processing, National Laboratory Characterization and Modeling of Functional Materials I 9:00 AM Program Organizers: Mohammad Elahinia, University of Toledo; Haluk In situ Crack Loading and Measurement Techniques for Gen IV Reactor Karaca, University of Kentucky; Reginald Hamilton, Pennsylvania Coolant Media: Peter Beck1; Andrew Brittan2; Dustin Mangus1; Jake Quincy1; State University; Mohammad Mahtabi, University Of Tennessee - George Young2; Guillaume Mignot1; Samuel Briggs1; Julie Tucker1; 1Oregon Chattanooga; Narges Shayesteh Moghaddam, University of Texas at State University; 2Kairos Power Arlington; Reza Rizvi, University of Toledo; Markus Chmielus, University of Pittsburgh; Hamdy Ibrahim, University of Tennessee at Chattanooga; 9:20 AM Mohammadreza Nematollahi, University of Toledo Characterization of Stress and Environment Dependent Fracture Mechanisms of SiC/SiC CMCs: Morgan Price1; Clifton Bumgardner1; Frederick Wednesday AM November 4, 2020 Heim1; David Roache1; Xiaodong Li1; 1University of Virginia
8:00 AM 3D Printed Shape Memory Polymers: Electronics and Morphing: Trenton Cersoli1; Pedro Cortes1; 1Youngstown State University
8:20 AM Establishing Fundamentals for Laser Metal Deposition of Functional Ni- Mn-Ga Alloys: Effect of Rapid Solidification on Microstructure and Phase Transformation Characteristics: Emily Flitcraft1; Carolin Fink1; Markus Chmielus2; Jakub Toman2; 1Edison Joining Technology Center - OSU Welding Engineering; 2University of Pittsburgh
47 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:40 AM Microstructure and Property Differences in Sintered and Annealed Binder- Advances in Synthesis and Integration Methods for Jet 3D Printed Ni-Mn-Ga Magnetic Shape Memory Alloys: Aaron Acierno1; Enhanced Properties, and Applications in Emerging Ville Laitinen2; Jakub Toman1; Katerina Kimes1; Mirko Boin3; Robert Wimpory3; Nanomaterials — Energy Materials II: Membranes and Andrey Saren2; Kari Ullakko2; Markus Chmielus1; 1University of Pittsburgh; Catalysts 2Lappeenranta-Lahti University of Technology; 3Helmholtz-Zentrum Berlin Program Organizers: Chang-Yong Nam, Brookhaven National 9:00 AM Laboratory; Jung-Kun Lee, University of Pittsburgh; Zubaer Hossain, University of Delaware Epitaxial Growth of a Magnetic Shape-memory Alloy via Laser Melting and Directed Energy Deposition: Jakub Toman1; Tyler Paplham1; Peter Müllner2; Wednesday AM November 4, 2020 Markus Chmielus1; 1University of Pittsburgh; 2Boise State University
9:20 AM 8:00 AM Invited Compressive Behavior of NiMnGa Parts Fabricated by Binder Jet Additive Development of High-performance Ion Selective Membranes for Redox Manufacturing: Stephen Isacco1; Christopher Bansah1; Matthew Caputo2; C. Flow Batteries: Sangil Kim1; Tongshuai Wang1; Natalie Fifield2; Chulsung Bae2; Virgil Solomon1; 1Youngstown State University; 2Penn State University 1University of Illinois at Chicago; 2Rensselaer Polytechnic Institute
8:30 AM Invited
Advanced Steel Metallurgy — Characterization Influence of Surface Charge on the Photochemical Reactivity 3 ofSrTiO , 1 Program Organizers: Chirag Mahimkar, Big River Steel; Justin Raines, BaTiO3, and TiO2/BaTiO3 Heterostructured Catalysts: Wenjia Song ; Mingyi SSAB Americas; Kip Findley, Colorado School of Mines; Alla Sergueeva, Zhang1; Paul Salvador1; Gregory Rohrer1; 1Carnegie Mellon University NanoSteel Company Inc; Daniel Branagan, The NanoSteel Co
Wednesday AM November 4, 2020 AI for Big Data Problems in Imaging, Modeling and
Synthesis — AI-accelerated Materials Discovery and 8:00 AM Synthesis Microstructure Characterization and Post-heat Treatment Design for High- Program Organizers: Mathew Cherukara, Argonne National Laboratory; Badri Narayanan, University of Louisville; Subramanian Strength Low-alloy Steels Strengthened with Fe2SiTi-L21 Precipitates: Rafael Rodriguez De Vecchis1; Soumya Sridar1; Xin Wang1; Zhangwei Wang2; Sankaranarayanan, University of Illinois (Chicago) Wei Xiong1; 1University of Pittsburgh; 2Max-Planck-Institut für Eisenforschung GmbH Wednesday AM November 4, 2020
8:20 AM Microstructure Property Relationships of Al- alloyed Medium Manganese 8:00 AM Steels: Alexandros Serafeim1; Christian Haase1; Wolfgang Bleck1; 1Steel Institute Enabling Data-driven Discovery of Chemistry-function Relationships via 1 1 (IEHK) Automated Packing Motif Labeling: Donald Loveland ; Phan Nguyen ; Anna Hiszpanski1; T. Yong-Jin Han1; 1Lawrence Livermore National Laboratory 8:40 AM Relationship between Microstructure and Tensile Properties on High 8:20 AM Invited 1 1 Strength Medium Carbon Mo-Nb-B Microalloyed Q/Q&T Steels: Irati Directing Matter In-situ via Deep Learning: Bobby Sumpter ; Oak Ridge 1 1 2 2 3 National Laboratory Zurutuza ; Nerea Isasti ; Eric Detemple ; Volker Schwinn ; Hardy Mohrbacher ; Pello Uranga1; 1CEIT and TECNUN (University of Navarra); 2AG der Dillinger 9:00 AM Hüttenwerke; 3NiobelCon bvba Inverse Design of Porous Structures by Deep Learning and TPU-based Computing: Yuhai Li1; Yuhan Liu1; Mathieu Bauchy1; 1University of California, Los Angeles Advances in Dielectric Materials and Electronic Devices — Ferroics, Multiferroics, & Electronics 9:20 AM Invited Polymer Informatics—Current Status and Critical Next Steps: Lihua Chen1; Program Organizers: Amar Bhalla, University of Texas; Ruyan Guo, 1 1 University of Texas at San Antonio; Rick Ubic, Boise State University; Rampi Ramprasad ; Georgia Institute of Technology Danilo Suvorov, Jožef Stefan Institute
Wednesday AM November 4, 2020 Broadening Participation in the Materials Science and Engineering Profession — Session I
10:20 AM Wednesday AM November 4, 2020 Multiferroism and Magneto-electric Coupling Effect of M-type Hexaferrites:
Gulong Tan1; Xue Li1; HaoHao Sheng1; Wei1; Yao Huang1; 1Wuhan University of Technology 11:00 AM
Presenters include: Karl Reid, National Society of Black Engineers; Beth 10:40 AM Dickey, Carnegie Mellon University; Keith Bowman, University of Maryland; Chemical and Magnetic Phase Stability in BiXO by Density-functional 3 Olivia Graeve, University of California San Diego; Ellen Cerreta, Los Alamos Theory: Michael Walden1; Cristian Ciobanu1; Geoff Brennecka1; 1Colorado National Laboratory; and Marc Brooks, Nucor School of Mines
48 8:20 AM Ceramic and Crystal Materials for Optics and Multi-scale Cs Sorbents Easily Transformable into Waste Confinement Photonics — Session I Matrices: Agnes Grandjean1; Micheal Maloney1; Clément Cabaud1; N. Massoni1; Program Organizers: Yiquan Wu, Alfred University; Jas Sanghera, Naval Scott Misture2; 1CEA, DEN, Univ. Montpellier; 2Alfred University Research Laboratory; Akio Ikesue, World-Lab. Co., Ltd; Mark Dubinskiy, Army Research Laboratory; Xiang Hua Zhang, University of Rennes - and - Materials Science Department, University of Arizona; Michael Coatings to Protect Materials from Extreme Squillante, Radiation Monitoring Devices Inc; Long Zhang, Shanghai Environments — Environmental and Thermal Barrier Institute of Optical and Fine Mechanics, Chinese Academy of Science; Takunori Taira, National Institutes of Natural Science Coatings I Program Organizers: Kang Lee, NASA Glenn Research Center; Yutaka Wednesday AM November 4, 2020 Kagawa, High Performance Materials; Daniel Mumm, University of California, Irvine; Rodney Trice, Purdue University; Emmanuel Boakye, UES Inc.; Valerie Wiesner, NASA Langley Research Center; Edward 8:00 AM Invited Gorzkowski, Naval Research Laboratory; Scooter Johnson, Naval Manipulating Properties via Grain Size Engineering in Transparent Research Laboratory; Richard Chromik, McGill University; Jun Song, Ceramics: James Wollmershauser1; Boris Feigelson1; Lukasz Kuna2; John McGill University; Christian Moreau, Concordia University; Stephen Yue, Mangeri3; Kevin Anderson4; Heonjune Ryou1; Eric Patterson1; Edward McGill University Gorzkowski1; Serge Nakhmanson2; 1U.S. Naval Research Laboratory; 2University Wednesday AM November 4, 2020 of Connecticut; 3Academy of Sciences of the Czech Republic; 4National Research
Council Postdoctoral Research Fellow sited at U.S. Naval Research Laboratory
8:00 AM 8:40 AM Invited Cyclic Steam Oxidation of Single Layer Ytterbium Disilicate Environmental ZnS:Ag Scintillators: Synthesis, Microstructure, and Luminescence: Luiz Barrier Coatings: Kenneth Kane1; Padraig Stack2; Eugenio Garcia3; Sanjay Jacobsohn1; 1Clemson University Sampath3; Bruce Pint1; 1Oak Ridge National Laboratory; 2University of Akron; 9:00 AM Invited 3Center for Thermal Spray Research
Plate/Powder Form of Single Crystal Phosphors for High-brightness White 8:30 AM Lighting: Kiyoshi Shimamura1; Encarnacion Garcia Villora1; Daisuke Inomata2; Anisotropic Wettability of CaO-MgO-Al O -SiO Deposits on YAlO : 1National Institute for Materials Science; 2Tamura Corporation 2 3 2 3 Implications for Grain Boundary Engineering of Environmental Barrier 9:20 AM Invited Coatings for Gas Engine Applications: Amanda Velazquez Plaza1; Amanda Nano-phosphor Materials Synthesized by Novel Soft Chemistry, Water- Krause1; 1University of Florida
assisted Solid-state Reaction Method: Kenji Toda1; Dae-Ho Yoon2; 1Niigata 8:50 AM Invited University; 2Sungkyunkwan University Cathodic Arc Deposition of Silicon Aluminum Nitride Coating on SiC: 9:40 AM Emmanuel Boakye1; Ming Ming Chen1; Keller1; Brian Sirn1; Rabi Bhattacharya1; Fabrication and Optical Properties of Yb-doped MgO Transparent Ceramics A.K Rai1; 1UES Inc.
by Spark Plasma Sintering: Xuan Chen1; David Carloni1; Yiquan Wu1; 1Alfred 9:20 AM University Real-time Observation of Impact Damage in Coated Silicon Carbide (SiC): 10:00 AM Nesredin Kedir1; Wayne Chen1; Kamel Fezzaa2; 1Purdue University; 2ANL/APS
Investigation Into Improving Scintillation Properties of Cesium Hafnium 9:40 AM Chloride: Cordell Delzer1; Ketaki Joshi1; Luis Stand1; Nerine Cherepy2; Steve Novel Multiscale Shear Adhesion Testing of Thermal Barrier Coatings: John Payne2; Xianfei Wen1; Jason Hayward1; 1University of Tennessee; 2LLNL Daspit1; 1University of Virginia 10:20 AM Containerless Processing and Characterization of Potential Host Crystals for Photorefractive Devices: Elizabeth Hodges1; Michael SanSoucie2; Robert Emergent Materials under Extremes and Decisive In Hyers1; 1University of Massachusetts Amherst; 2NASA Situ Characterizations — Pressure-induced dramatic changes in structures and properties Program Organizers: Xiaofeng Guo, Washington State University; Xujie Ceramics in the Nuclear Fuel Cycle — Waste Form Lu, Center for High Pressure Science & Technology Advanced Research; Development Hua Zhou, Argonne National Laboratory; Judith Driscoll, University of Program Organizers: Cory Trivelpiece, Savannah River National Cambridge; Hongwu Xu, Los Alamos National Laboratory Laboratory; Kyle Brinkman, Clemson University; Philip Edmondson, Oak Ridge National Laboratory; Djamel Kaoumi, North Carolina State Wednesday AM November 4, 2020 University
Wednesday AM November 4, 2020 8:00 AM Evolution of Structure, Electrical, and Optical Properties in Ti-doped In O 2 3 Nanocrystals under Pressure: Xuqiang Liu1; Yandong Wang2; Wenge Yang3; 8:00 AM 1Northeastern University(China) and HPSTAR; 2Northeastern University; 3Center A First-principles Database Approach to Predicting Trans-Uranic Waste for High Pressure Science & Technology Advanced Research(HPSTAR)
Forms: Matthew Christian1; Vladislav Klepov1; Kristen Pace1; Gregory Morrison1; Theodore Besmann1; Hans-Conrad zur Loye1; 1University of South Carolina
49 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:20 AM Invited Giant Pressure-induced Enhancements in Electronic Transport and High Entropy Materials: Concentrated Solid Solution, Photoelectric Properties in 2D and 3D Structures: Wenge Yang1; 1Center for Intermetallics, Ceramics, Functional Materials and High Pressure Science and Technology Advanced Research Beyond — High Entropy Ceramics 8:50 AM Program Organizers: Xingbo Liu, West Virginia University; Michael Gao, National Energy Technology Laboratory; Peter Liaw, University of High Pressure & Temperature Investigation into Thorium Orthosilicates: Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, Andrew Strzelecki1; Jason Baker2; Stella Chariton3; Vitali Prakapenka3; Hongwu Alfred University; Yu Zhong, Worcester Polytechnic Institute Xu2; Mostafa Ahmadzadeh1; John McCloy1; Paul Estevenon4; Adel Mesbah4; 4 1 1 2 Nicolas Dacheux ; Xiaofeng Guo ; Washington State University; Los Alamos Wednesday AM November 4, 2020 3 4 National Laboratory; Argonne National Laboratory; ICSM
8:00 AM Invited Grain Boundaries, Interfaces, and Surfaces in High-entropy Sesquioxide Transparent Ceramics with Up-conversion 1 1 1 1 Functional Materials: Fundamental Structure-Property- Functionality: Guangran Zhang ; Iva Milisavljevic ; Yiquan Wu ; Alfred University Performance Relationships — Kinetic Processes and Interface Transitions 8:20 AM
Program Organizers: Catherine Bishop, University of Canterbury; John Chemical Defect Reactivity of A-site High-Entropy LaFeO3 and LaMnO3 Blendell, Purdue University; Shen Dillon, University of Illinois at Urbana- Based Perovskite Oxides: Hector De Santiago Hernandez1; Wei Li1; Wenyuan Champaign; Wolfgang Rheinheimer, Purdue University; Ming Tang, Rice Li1; Xingbo Liu1; 1West Virginia University University; Melissa Santala, Oregon State University 8:40 AM Invited Wednesday AM November 4, 2020 Tuning of Lattice Distortion in High-entropy Oxides by High Pressure: Qiaoshi Zeng1; 1Hpstar
8:00 AM 9:00 AM Invited A Survey of Constrained Grain Boundary Migration Mechanisms: Ian Controllable Phase Heterogeneity in High Entropy Oxides: Alexander Dupuy1; Chesser1; Elizabeth Holm1; 1Carnegie Mellon University Julie Schoenung1; 1University of California, Irvine
8:20 AM 9:20 AM Invited Equilibrium and Kinetic Shapes of Grains in Polycrystals: Wolfgang Magnetic Properties of High Entropy Oxides: Abhishek Sarkar1; Ralf Witte2; Rheinheimer1; John Blendell2; Carol Handwerker2; 1TU Darmstadt; 2Purdue Robert Kruk2; Richard Brand2; Horst Hahn1; 1Technische Universität Darmstadt; University 2Karlsruhe Institute of Technology (KIT)
8:40 AM 9:40 AM Invited Electromigration-induced Defects’ Evolution in Polycrystalline Quantification of the Feasible High Entropy Alloy Space via Novel Alloy 1 Search Schemes: Raymundo Arroyave1; 1Texas A&M University Interconnects: Insights from Phase-field Simulations: William Farmer ; Sree Vemulapalli1; Kumar Ankit1; 1Arizona State University 10:00 AM Invited 9:00 AM Phase Transformation and Kinetic Behavior of High Entropy Oxide Relating Grain Size Distributions and Grain Boundary Excess Coverages Materials Characterized via Rapid In-situ Non-ambient X-ray Diffraction: to Complexion Transitions in Eu-doped MgAl2O4: Christopher Marvel1; Brianna Musico1; Cordell Delzer1; Claudia Rawn1; Veerle Keppens1; David Caroline Riedel1; Amanda Krause2; Martin Harmer1; 1Lehigh University; Mandrus1; 1University of Tennessee 2University of Florida
9:20 AM Integration between Modeling and Experiments for Grain Boundary Engineering ZnAl2O4 via Rare Earth (RE) Doping with Crystalline Metals: From Atomistic to Macroscopic Varying Ionic Radii: Luis Sotelo Martin1; Ricardo Castro1; 1University of California, Davis Scales II — Session III Program Organizers: Mariyappan Arul Kumar, Los Alamos National 9:40 AM Invited Laboratory; Irene Beyerlein, University of California, Santa Barbara; Roughening and Screening Transitions in Grain Boundaries and the Levente Balogh, Queen’s University; Josh Kacher, Georgia Institute Implications on Grain-Boundary Properties: Jian Han1; Kongtao Chen2; of Technology; Caizhi Zhou, University of South Carolina; Lei Cao, David Srolovitz1; 1City University of Hong Kong; 2University of Pennsylvania University of Nevada Wednesday AM November 4, 2020
8:00 AM Electron Backscatter Diffraction Pattern Simulation for Interaction Volume Containing Lattice Defects: Chaoyi Zhu1; Marc De Graef1; 1Carnegie Mellon University
8:20 AM Strong strain hardening in ultrafast melt-quenched nanocrystalline Cu: the role of fivefold twins: Amir Hassan Zahiri1; Pranay Chakraborty1; Yan Wang1; Lei Cao1; 1Universitiy Of Nevada Reno
50 8:40 AM Invited Regulating Elastic and Plastic Deformations by Microstructure Design and Journal of the American Ceramic Society Awards Coupling between Deformation and Phase Transformation - An Integrated Symposium — Journal of the American Ceramic Modeling and Experimental Study: Qianglong Liang1; Yufeng Zheng2; Yipeng Society Awards Symposium Session I 3 4 4 1 1 Gao ; Tianlong Zhang ; Dong Wang ; Michael Mills ; Hamish Fraser ; Yunzhi Program Organizer: William Fahrenholtz, Missouri University of Science Wang1; 1Ohio State University; 2University of Nevada Reno; 3INL; 4Xi’an Jiao and Technology Tong University
Wednesday AM November 4, 2020 9:10 AM
Novel Remapping Method for HR-EBSD Based on Computer Vision Algorithm: Chaoyi Zhu1; Kevin Kaufmann2; Kenneth Vecchio2; 1Carnegie 10:20 AM Mellon University; 2University of California, San Diego Introductory Comments: Journal of the American Ceramic Society Awards
Symposium: William Fahrenholtz1; 1Missouri University of Science and 9:30 AM Technology Applications of Computational Polarized Light Microscopy for Large Area Orientation 10:25 AM Determination of alpha-Titanium: Ke-Wei Jin1; Marc De Graef1; 1Carnegie Direct-Writing of 3D Photonic Crystals with Tunable Terahertz Properties: Mellon University Qi Li1; 1Southwest Jiaotong University
9:50 AM 10:55 AM Design of an Austenitic Steel Weldment System Using ICME: Daniel Bechetti1; Improvements of Fergusonite-type Microwave Dielectric Ceramics by Ions Paul Lambert1; Jacob Steiner1; Matthew Sinfield1; Charles Fisher1; 1NSWC Substitutions: Di Zhou1; 1Xi’an Jiaotong University
Carderock Division 11:25 AM Phase Formation and Mechanical Properties of (Mg,Co,Ni,Cu,Zn)O High Entropy Ceramics by Field Assisted Sintering Technology: Fei Chen1; Interfaces and Phase Transformations — Interfaces Weichen Hong1; Mingyong Jia1; Qiang Shen1; 1Wuhan University of Technology and Phase Transformations II Program Organizers: Arun Devaraj, Pacific Northwest National Laboratory; Matthias Militzer, University of British Columbia; Matthew Steiner, University of Cincinnati; Mohsen Zaeem, Colorado School of Manufacturing and Processing of Advanced Ceramic Mines; Yufeng Zheng, University of Nevada, Reno Materials — New Opportunities in Ceramic Processing II Wednesday AM November 4, 2020 Program Organizers: Bai Cui, University of Nebraska-Lincoln; Mike Alexander, Allied Mineral Products, Inc.; Eric Faierson, Quad City Manufacturing Laboratory - Western Illinois University; James Hemrick, 8:00 AM Invited Reno Refractories Inc.; Keith DeCarlo, Blasch Precision Ceramics Study of Strain Rate and Temperature Dependent Behavior of Pseudo- morphic bcc Mg within the Mg/Nb Nanocomposites: Manish Jain1; Wednesday AM November 4, 2020 Rajaprakash Ramachandramoorthy1; Marko Knezevic2; Nenad Velisavaljevic3;
Nathan Mara4; Irene Beyerlein5; Johann Michler1; Siddhartha Pathak6; 1Empa- 8:00 AM Invited Swiss Federal Laboratories for Materials Science and Technology; 2University Developing Materials and Coating Technologies for Mitigation of Lunar of New Hampshire; 3Argonne National Laboratory; 4University of Minnesota; Dust Adhesion and Abrasion: Valerie Wiesner1; Lopamudra Das2; Chris Wohl1; 5University of California, Santa Barbara; 6University of Nevada Reno Glen King1; Keith Gordon1; Samuel Hocker1; Karen Taminger1; Sharon Miller3; 8:30 AM 1NASA Langley Research Center; 2National Institute of Aerospace; 3NASA Glenn Shear-mediated Interfacial Structure Evolution in Nanoscale FCC Gold: Research Center
Zhengwu Fang1; Scott Mao1; 1University of Pittsburgh 8:40 AM Invited 8:50 AM Neutrons Guide Materials Design and Synthesis of Functional Oxides: Yan Phase Transformations in High-Temperature Industrial Applications: Chen1; Ke An1; 1Oak Ridge National Laboratory
An Experimental and Computational Study of Nitridation in Commercial 9:20 AM Invited Austenitic Stainless Steel: Alice Young1; Milo Kral1; Catherine Bishop1; Transparent Ceramics by Lithography-Based Additive Manufacturing: 1University of Canterbury Guangran Zhang1; David Carloni1; Yiquan Wu1; 1Alfred University
9:10 AM 10:00 AM Invited Microstructure and Mechanical Properties of Pre-aged Thermo- Processing and Properties of High Thermal Conductive Silicon Nitride Mechanically Processed NiTiHf Shape Memory Alloy: Faith Gantz1; Nathan Ceramics: Kiyoshi Hirao1; You Zhou1; Hideki Hyuga1; Tatsuki Ohji1; 1National Ley1; Jessica Rider1; Jordyn Ward1; Drew Forbes2; Marcus Young1; 1University Institute of Advanced Industrial Science and Technology (AIST) of North Texas; 2Fort Wayne Metals Research Products Corp. 10:40 AM Invited A Rational Design of Ultra-uniform Nanocrystalline Materials: Yanhao Dong1; Hongbing Yang2; Jiangong Li2; I-Wei Chen3; Ju Li1; 1Massachusetts Institute of Technology; 2Lanzhou University; 3University of Pennsylvania
51 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Materials Informatics for Images and Multi- Nanotechnology for Energy, Environment, Electronics, dimensional Datasets — Joint Session: “Materials Healthcare and Industry — Nanotechnology for Informatics for Images and Multi-dimensional Energy, Environment, Electronics, Healthcare and Datasets” and “Materials Informatics and Modeling for Industry - Session I 21st Century Ceramics Research” Program Organizers: Gary Pickrell, Virginia Tech; Navin Manjooran, Program Organizers: Amanda Krause, University of Florida; Kristen Solve Technology and Research, Inc. Brosnan, General Electric Research; Alp Sehirlioglu, Case Western Reserve University Wednesday AM November 4, 2020
Wednesday AM November 4, 2020 8:00 AM
Introductory Comments: Nanotechnology for Energy, Environment, 8:00 AM Invited Electronics, Healthcare and Industry: Gary Pickrell1; 1Virginia Tech
Computer Vision and Machine Learning for Microstructural Image Data: 8:05 AM Invited Elizabeth Holm1; 1Carnegie Mellon University Rational Design of MOFs-based Nanocomposites for Environmental 8:30 AM Invited Applications: Weining Wang1; 1Virginia Commonwealth University
Microstructure Representation for Physically Meaningful Descriptors: Olga 8:35 AM Wodo; 1 Additively Manufactured In-pile Strain Sensors: Timothy Phero1; Kaelee 9:00 AM Invited Novich1; Bette Gougar1; Samuel Cutler1; Kiyo Fujimoto1; Richard Skifton2; David Incorporating Materials Physics into Imaging Algorithms for Microscope Estrada1; Brian Jaques1; 1Boise State University; 2Idaho National Laboratory
Image Interpretation: Jeff Simmons1; 1U.S. Air Force Research Laboratory 8:55 AM 9:30 AM Invited Energy and Nanomaterials: Synergy at the Interface: Randy Vander Wal1; Accelerate TEM and Tomography Imaging by Deep-learning Enabled 1Penn State University
Compressive Sensing and Information Inpainting in High-dimensional 9:15 AM Manifold: Huolin Xin1; 1University of California, Irvine Pioneering Sensing Applications of Nanoporous Gold by Leveraging Unique 10:00 AM Invited Properties at the Nanoscale: Timothy Wong1; Roger Newman1; 1University of FAIR Digital Object Framework and High Throughput Experiment: Zachary Toronto Trautt1; Raymond Plante1; Gretchen Greene1; Jason Hattrick-Simpers1; Brian DeCost1; Aaron Kusne1; Andriy Zakutayev2; 1National Institute of Standards and Technology; 2National Renewable Energy Laboratory Next Generation Biomaterials — Next Generation Biomaterials IV Program Organizers: Roger Narayan, University of North Carolina; Multi-material Additive Manufacturing: Processing David Dausch, RTI International; Sanjiv Lalwani, Lynntech, Inc. and Heterogeneous Materials Design — Innovative AM Approaches for Multi-functions Wednesday AM November 4, 2020
Program Organizers: Hang Yu, Virginia Polytechnic Institute and State University; Steven Boles, Hong Kong Polytechnic University; Michael 8:00 AM Invited Gibson, Desktop Metal; Lonnie Love, Oak Ridge National Laboratory; Next Generation Multi-principal and Amorphous Metallic Biomaterials: Leon Prentice, CSIRO Metal Industries Jibril Shittu1; Maryam Sadeghilaridjani1; Sundeep Mukherjee1; 1University of North Texas Wednesday AM November 4, 2020
8:20 AM Invited Novel Hierarchical Carbon Nantotube-coated Materials as Bioscaffolds 8:00 AM for Keratinocyte Cell Growth: Soham Parikh1; Courtney Sulentic1; Sharmila Material Layering with Binder Jet 3D Printing to Improve Magnetocaloric Mukhopadhyay2; 1Wright State University; 2The University of Maine Functionality: Erica Stevens1; Katerina Kimes1; Jeffrey Martin1; Emma Dickinson1; Markus Chmielus1; 1University of Pittsburgh 8:40 AM : Akshay Patel1; 8:20 AM Invited Chemical, Thermal and Radiological Stability of Bio-ceramics Margaret LaCourse1; Brett Setera1; Ian Emge1; Charmain Su1; Joshua Wilhide1; Multimaterial, Multifunctional Design of Metallic Components: Joseph 1 1 1 1 1 Newkirk1; Frank Liou1; 1Missouri University of Science and Technology Brian Cullum ; Bradley Arnold ; Fow-Sen Choa ; Narsingh Singh ; University of Maryland, Baltimore County
9:00 AM Invited Direct Digital Manufacturing (DDM): The Integration of Multimaterials, 9:00 AM : Additive and Subtractive Manufacturing: Charles Newton1; 1nScrypt Ultra-soft Hydrogel Mechanical Property Testing Device and Methodology Kazue Orikasa1; Nicole Bacca1; Arvind Agarwal1; 1Florida International University
9:20 AM Silk Fibroin Scaffold Degradation Induced by Focused Therapeutic Ultrasound: Megan DeBari1; Xiaodan Niu1; Mallory Griffin1; Sean Pereira1; Bin He1; Rosalyn Abbott1; 1Carnegie Mellon University
52 Surface Treatments and Properties of Titanium and Thermodynamics of Materials in Extreme Titanium Alloys: A Forum on New Strategies and Environments — Thermodynamics, Stability, and Processes for Biomedical and Industrial Advanced Reactivity of Materials under Extreme Conditions Applications — Surface Treatments and Properties of Program Organizers: Xiaofeng Guo, Washington State University; Titanium and Titanium Alloys Kristina Lilova, Arizona State University; Kyle Brinkman, Clemson Program Organizers: Silvia Spriano, Politecnico Di Torino; Sara Ferraris, University; Alexandra Navrotsky, Arizona State University; Jake Politecnico di Torino; Paulo Tambasco de Oliveira, Universidade de São Amoroso, Savannah River National Laboratory; Xingbo Liu, West Virginia Paulo,; Antonio Nanci, Université de Montréal University; Gustavo Costa, NASA Glenn Research Center
Wednesday AM November 4, 2020 Wednesday AM November 4, 2020
8:00 AM 8:00 AM Invited : Introductory Comments: Surface Treatments and Properties of Titanium Thermodynamics of An-Cl Complexes at High Temperature and Pressure Ping Yang1; Xiaobin Zhang1; Morgan Kelley1; Enrique Batista1; Jason Baker1; and Titanium Alloys:: Silvia Spriano1; 1Politecnico De Torino Hakim Boukhalfa1; Artaches Migdissov1; Hongwu Xu1; 1Los Alamos National 8:05 AM Laboratory
Controlled Surface Topography of Titanium-based Implants via Use of Gas/ 8:30 AM Invited Solid Reactions: Naotaka Ogura1; Pavan Srivas1; Kenneth Sandhage1; 1Purdue University Improved CMAS Resistance of Environmental Barrier Coatings via Tailoring Phase and Composition of Mixed Rare Earth Silicates: Elizabeth 8:25 AM Opila1; Rebekah Webster1; Cameron Miller1; Clark Luckhardt1; 1University of Sustainable Antibacterial Activity of Iodine-loaded Bioactive Titanium Virginia
Metal by Chemical and Heat Treatment: Seiji Yamaguchi1; Morihiro Ito1; Seine Shintani1; Takashi Nakamura1; Hiroaki Takadama1; 1Chubu University 9:00 AM Exploring Extreme Environments via In-situ Electron Microscopy: Khalid 8:45 AM Hattar1; 1Sandia National Laboratories A Comparative Study of Protein Adsorption on Different Bio-surfaces for Osteointegration: Jacopo Barberi1; Sara Ferraris1; Luisa Mandrile2; Erik Piatti1; Andrea Mario Rossi2; Seiji Yamaguchi3; Silvia Spriano1; 1Politecnico di Torino; Additive Manufacturing of Metals: Complex 2National Institute of Metrological Research; 3Chubu University Microstructures and Architecture Design — Microstructure Evolution in Structural Metals Program Organizers: Yu Zou, University of Toronto; Hang Yu, Virginia Synthesis, Characterization and Application of 3D Polytechnic Institute and State University Graphene — Session I Program Organizers: Yun Hu, Michigan Technological University; Siyuan Wednesday PM November 4, 2020 Fang, Michigan Technological University
Wednesday AM November 4, 2020 2:00 PM Invited Laser Powder Bed Fusion of Single-crystalline-like Stainless Steel 316L; From Samples to Parts: Xianglong Wang1; Jose Alberto Muniz Lerma1; Oscar 8:00 AM Invited Sanchez Mata1; Mohammad Attarian Shandiz1; Mathieu Brochu1; 1McGill Development of Highly Efficient TCR with Free-standing Multilayer University Graphene: Minhee Yun1; 1University of Pittsburgh 2:30 PM 8:30 AM Invited Additive Manufacturing of Pure Magnesium: Bandar AlMangour; 1 Synthesis and Application of 3D Surface-microporous Graphene: Yun Hu1; 1Michigan Technological University 2:50 PM Fabrication of High Temperature High Strength Austenitic Steels by 9:10 AM Invited Laser Powder-bed Fusion: Sebastien Dryepondt1; Peeyush Nandwana1; Kinga Graphene-enabled Nanocomposites: Xiaodong Li1; 1University of Virginia 1 1 1 1 1 1 Unocic ; Patxi Fernandez-Zelaia ; Ying Yang ; Yousub Lee ; Fred List ; Oak Ridge National Laboratory 9:40 AM 3D Graphene as an Efficient Electrode for Capacitive Deionization: Siyuan 3:10 PM 1 1 1 1 Fang ; Liang Chang ; Yun Hang Hu ; Michigan Technological University The Structure of Cellular Features in Additively Manufactured 316L: Richard Fonda1; Joseph Aroh2; Jerry Feng1; David Rowenhorst1; 1Naval Research Laboratory; 2Carnegie Mellon University
3:30 PM Secondary Orientation Preference of Ni-based Superalloy Single Crystals Produced via Electron Beam Melting: Patxi Fernandez-Zelai1; Michael Kirka1; Yousub Lee1; Andres Marquez Rossy1; Sebastien Dryepondt1; 1Oak Ridge National Laboratory
53 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Additive Manufacturing: Alloy Design to Develop New Additive Manufacturing: Microstructure and Material Feedstock Materials — Session II Properties of Titanium-based Materials — Modeling Program Organizers: Joseph McKeown, Lawrence Livermore National and Properties Laboratory; Aurelien Perron, Lawrence Livermore National Laboratory; Program Organizers: Ulf Ackelid, Freemelt AB; Ola Harrysson, North Manyalibo Matthews, Lawrence Livermore National Laboratory; Christian Carolina State University; Peeyush Nandwana, Oak Ridge National Leinenbach, Empa, Swiss Federal Laboratories for Materials Science Laboratory; Rongpei Shi, Lawrence Livermore National Laboratory; and Technology; Peter Hosemann, University of California Yufeng Zheng, University of Nevada, Reno
Wednesday PM November 4, 2020 Wednesday PM November 4, 2020
2:00 PM 2:00 PM Invited 3D Characterization of Cracks Formed in “Weldable” AA6061 and Predicting Properties in Additively Manufactured Titanium Alloys: Sunil 1 1 Implications for Alloy Design: Giuseppe Del Guercio ; Graham McCartney ; Dhapola1; Andrew Temple1; Thomas Ales1; Peter Collins1; 1Iowa State University Nesma Aboulkhair1; Chris Tuck1; Marco Simonelli1; 1University of Nottingham 2:30 PM 2:20 PM Microstructural Modeling of ß to a Transformation Morphologies in Multi- Mechanical Alloying of Feedstock Powder for Additive Manufacturing layered Laser Wire Additively Manufactured Ti-6Al-4V Parts: Andrew by Selective Laser Melting: Aluminum Alloy Matrix Composites: Ethan (Drew) Huck1; Amit Verma1; Anthony Rollett1; Brandon Abranovich1; Elizabeth Parsons1; 1MIT Lincoln Laboratory 1 1 1 1 1 Chang-Davidson ; Ali Guzel ; Jack Beuth ; Zhening Yang ; Ze Geng ; Lonnie Smith1; Amaranth Karra1; 1Carnegie Mellon University 2:40 PM Invited An Interdisciplinary Approach for Alloy Design for Additive Manufacturing: 2:50 PM Raymundo Arroyave1; 1Texas A&M University 1 Dynamic Transformations In AM Ti6Al4V Alloy: Sabina Kumar ; Rakesh 2 3 3 1 1 3:10 PM Kamath ; Yan Chen ; Peeyush Nandwana ; Suresh Babu ; University of Tennessee; 2University Of Tennessee; 3Oak Ridge National Laboratory CALPHAD Informed Design of Rare-earth Containing Alloys for Additive Manufacturing: Emily Moore1; 1Lawrence Livermore National Laboratory 3:10 PM 3:30 PM Fracture of additively manufactured Ti-6Al-4V under multiaxial loading: 1 1 Development of Oxidation Resistant Multi-Principle Element Alloys Applied experiments and modeling: Alexander Wilson-Heid ; Allison Beese ; 1 1 1 1 Pennsylvania State University with Additive Manufacturing: Jose Loli ; Yining He ; Amish Chovatiya ; 1 1 1 1 1 Zachary Ulissi ; Bryan Webler ; Jack Beuth ; Maarten De Boer ; Carnegie 3:30 PM Mellon University Influence of Different Post-printing Treatments on the In Vitro Biocompatibility of 3D Generated Titanium Plates: Jakob Schneider1; Elena Lopez1; Frank Brueckner1; Christoph Leyens1; Ute Botzenhart1; Bernhard Additive Manufacturing: Materials, Alloy Development, Weiland1; Kiriaki Katerina Papadopoulos1; Andreas Schroeder1; 1Fraunhofer IWS Microstructure and Properties — Additive Manufacturing of Fe-based Alloys 3:50 PM Measuring texture at large scales using spatially resolved acoustic Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of spectroscopy: Thomas Ales1; Peter Collins1; 1Iowa State University Technology; Zhi Wang, South China University of Technology; Jurgen Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, 4:10 PM Norwegian University of Science and Technology Understanding Microstructure and Mechanical Property Variations in Lase- based Powder Bed Fusion of Ti-6Al-4V and their Heat Treatment Design: Wednesday PM November 4, 2020 Ebrahim Asadi1; Behzad Fotovvati1; Seyed Alireza Etesami1; 1University of
Memphis 2:00 PM Invited Structural Characterization of Wire and Arc Additive Manufactured (WAAM) Austenitic Stainless Steel: Sudhakar Vadiraja1; Ryan Foley1; 1Montana Technological University
2:20 PM Investigating the Mechanical, Microstructural, Corrosion and Impact Performances of a New Steel Composition, Produced by Tandem WAAM Mixing of Steel Wires: Osahon Ehigiator1; Supriyo Ganguly1; 1Cranfield University
2:40 PM 3D Characterization of Intrinsic Defects in Water- and Gas- Atomized 17-4 PH Stainless Steel Powder Precursors for Additive Manufacturing: Veeraraghavan Sundar1; Rachel Reed1; 1UES Inc.
3:00 PM Effect of Atomization and Processing Gas on Microstructures in Additively Manufactured 17-4PH Stainless Steel: Alexis Ernst1; Rainer Hebert1; Mark Aindow1; 1University of Connecticut 54 Advanced Characterization of Materials for Nuclear, Advanced Manufacturing, Processing, Characterization Radiation, and Extreme Environments — Materials and Modeling of Functional Materials — Advanced Mechanics & Environmental Degradation Manufacturing, Processing, Characterization and Program Organizers: Samuel Briggs, Oregon State University; Modeling of Functional Materials II Christopher Barr, Sandia National Laboratories; Emily Aradi, University Program Organizers: Mohammad Elahinia, University of Toledo; Haluk of Huddersfield; Michael Short, Massachusetts Institute of Technology; Karaca, University of Kentucky; Reginald Hamilton, Pennsylvania Janelle Wharry, Purdue University; Cheng Sun, Idaho National State University; Mohammad Mahtabi, University Of Tennessee - Laboratory; Dong Liu, University of Oxford; Khalid Hattar, Sandia Chattanooga; Narges Shayesteh Moghaddam, University of Texas at National Laboratories Arlington; Reza Rizvi, University of Toledo; Markus Chmielus, University of Pittsburgh; Hamdy Ibrahim, University of Tennessee at Chattanooga; Wednesday PM November 4, 2020 Mohammadreza Nematollahi, University of Toledo
Wednesday PM November 4, 2020 2:00 PM Invited
Explaining the Corrosion Morphology of Structural Materials in Molten Fluoride Salts With/Without Radiation: Weiyue Zhou1; Yang Yang2; Miaomiao 2:00 PM Jin3; Lingfeng He3; Andrew Minor2; Michael Short1; 1Massachusetts Institute Characterization of n-type Bismuth Telluride Processed via Selective Laser of Technology; 2Lawrence Berkeley National Laboratory; 3Idaho National Melting: Ryan Welch1; Haidong Zhang1; Saniya LeBlanc1; 1George Washington Laboratory University
2:40 PM 2:20 PM Enabling In-situ Crack Growth Testing and Monitoring in VTR Cartridge Strand Casting and Thermal Properties of Submillimeter Metallic Glass Loop Environments: Samuel Briggs1; Peter Beck1; Dustin Mangus1; Jake Wires: Ayodele Olofinjana1; James Kern2; 1University of the Sunshine Coast; Quincey1; Andrew Brittan1; George Young2; Guillaume Mignot1; Julie Tucker1; 2The Welding Institute
1Oregon State University; 2Kairos Power 2:40 PM 3:00 PM Defect Recognition on Coating Layer Using PinPoint Nanomechanical Mode Unveiling High Temperature Damage Mechanisms via In-situ Digital Image in Atomic Force Microscopy: Gil Min1; Gabriela Mendoza1; Cathy Lee1; Moses Correlation of Chromium-coated Zirconium-based Fuel Claddings: David Lee1; Jake Kim1; Keibock Lee1; 1Park Systems Roache1; Alex Jarama1; Clifton Bumgardner1; Frederick Heim1; Morgan Price1; Xiaodong Li1; 1University of Virginia Advanced Steel Metallurgy — Miscellaneous 3:20 PM Development of an In-Situ Mechanical Test System for Advanced Reactor Program Organizers: Chirag Mahimkar, Big River Steel; Justin Raines, Coolants: Jake Quincey1; Peter Beck1; Josef Parrington2; Lars Parrington2; SSAB Americas; Kip Findley, Colorado School of Mines; Alla Sergueeva, Christopher Lamb2; Henry Korellis3; Pit Schulze3; Alan Kruizenga3; Micah NanoSteel Company Inc; Daniel Branagan, The NanoSteel Co Hackett3; George Young3; Julie Tucker1; Samuel Briggs1; 1Oregon State University; 2Parrington Instruments; 3Kairos Power Wednesday PM November 4, 2020
3:40 PM Corrosion Control of Austenitic Stainless Steel and Nickel-Based Alloys in 2:00 PM 1 1 Molten Chloride Salt Environments: Kasey Hanson ; Krishna Moorthi Sankar ; Digital Innovative Design (DID) for Reliable Casting Performance of Steel 2 2 1 1 1 Remi Dingreville ; Joshua Sugar ; Chaitanya Deo ; Preet Singh ; Georgia Castings: Maria Diana David1; David Poweleit1; Raymond Monroe1; 1Steel 2 Institute of Technology; Sandia National Laboratories Founders’ Society of America
4:00 PM 2:20 PM Design of a Hot Hydrogen Test Loop for Testing of Nuclear Thermal Rocket Strain Aging Embrittlement of Structural Steel: Morimichi Kimura1; Kazutoshi 1 1 1 1 Elements: William Searight ; Alex Somers ; Leigh Winfrey ; The Pennsylvania Ichikawa1; Tomohiko Omura1; Masaki Mizoguchi2; 1Tohoku University; 2Nippon State University Steel Corporation
4:20 PM 2:40 PM Development of a Combined Thermal Hydraulic and Materials Corrosion Double-Twist Torsion Testing to Assess Partial Recrystallization in 1 1 Liquid-Sodium Experimental Facility: Dustin Mangus ; Juwan Johnson ; Brett Microalloyed Steels: Trevor Ballard1; John Speer1; Kip Findley1; Emmanuel De 1 1 1 1 1 Leitherer ; Peter Beck ; Seth Walton ; Guillaume Mignot ; Wade Marcum ; Julie Moor1; 1Advanced Steel Processing and Products Research Center, Colorado 1 1 1 Tucker ; Samuel Briggs ; Oregon State University School of Mines
3:00 PM Effect of Coiling and Annealing Temperature on Nb precipitation, Microstructure and Mechanical Properties of HSLA: Lei Cui1; Wenjun Wang2; Deshun Chen1; Yonggang Liu1; 1Ma Steel; 2Citic Metal Co., Ltd
3:20 PM Silicide Strengthened Ferritic Alloy - A New Method of Wear Protection in Nuclear Environments: Rahul Unnikrishnan1; David Bowden2; Michael Preuss1; 1The University of Manchester; 2UK Atomic Energy Authority
55 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
3:40 PM Triple Nano-precipitate Strengthened Austenitic Steel: Colin Stewart1; Richard Advances in Surface Engineering — Session I Fonda2; Keith Knipling2; 1National Research Council Associate at the U.S. Naval Program Organizers: Brian Skinn, Faraday Technology, Inc.; Timothy Research Laboratory; 2U.S. Naval Research Laboratory Hall, Faraday Technology Inc; Michael Roach, University of Mississippi Medical Center; Tushar Borkar, Cleveland State University; Sandip Harimkar, Oklahoma State University; Rajeev Gupta, North Carolina Advances in Dielectric Materials and Electronic State University Devices — Dielectrics and Piezoelectrics: Session II Wednesday PM November 4, 2020 Modeling and Applications Program Organizers: Amar Bhalla, University of Texas; Ruyan Guo, University of Texas at San Antonio; Rick Ubic, Boise State University; 2:00 PM Danilo Suvorov, Jožef Stefan Institute Effect of Surface Finish on the Corrosion Properties of Additively Manufactured Stainless Steel: Jamie Stull1; Courtney Clark1; Timothy Gorey1; Wednesday PM November 4, 2020 Don Johnson1; Randy Edwards1; Enkeleda Dervishi1; Daniel hooks1; 1Los Alamos National Laboratory
2:00 PM Invited 2:20 PM Integrating Material Fabrication, Characterization and Modeling to Performance Analysis of Biomimetic Ionic Polymer-metal Composite Maximize ROI: Steven Tidrow1; 1Alfred University 1 (IPMC) Thin-Film Actuators: Allison Arnold ; Kavin Sivaneri Varadharajan Idhaiam1; Lisa Hilgar1; Edward Sabolsky1; Ji Su2; 1West Virginia University; 2:40 PM 2NASA Langley Research Center Dielectric Capacitance for Chemical and Biological Sensing: Ian Emge1; Charmain Su1; Fow-Sen Choa1; Bradley Arnold1; Lisa Kelly1; Manish Verma1; 2:40 PM Kamdeo Mandal1; Himagowri Prasad1; Narsingh Singh1; 1University of Maryland, Nucleation, Growth, and Grain Structure Control of Electrodeposited Baltimore County 1 1 1 Graded Density Alloys: Michael McBride ; Donald Johnson ; Jamie Stull ; Enkeleda Dervishi1; Randall Edwards1; Daniel Hooks1; 1Los Alamos National 3:00 PM Laboratory Identifying Dielectric Breakdown Micromechanisms in Solid Oxides with In Situ TEM: Xinchun Tian1; Xiaoli Tan1; Geoff Brennecka2; Gabriel Caruntu3; 3:10 PM 1Iowa State University; 2Colorado School of Mines; 3Central Michigan University Reversible Electrochemical Mirror Devices Using Space Compliant Ionic : Holly Garich1; Danny Liu1; James Davis2; Morgan Tench3; 3:20 PM Invited Liquid Electrolytes Thomas Peng4; Jennings Taylor1; Timothy Hall1; Maria Inman1; 1Faraday Correlative Models of Some Structural Aspects of Perovskites: Evan Smith1; Technology Inc; 2University of South Alabama; 3Tench Technology; 4AFRL Kevin Tolman2; Sreco Škapin3; Rick Ubic1; 1Boise State University; 2Idaho National Laboratory; 3Jožef Stefan Institute 3:30 PM : Gwendolyn Bracker1; 4:00 PM Invited Electroplating Powder for Cold Spray Applications Elizabeth Hodges1; Madeline Scott1; Victor Champagne2; Robert Hyers1; Investigation of Intergranular Dielectric Properties within the Relation 1University of Massachusetts; 2Cold Spray Innovations International between Fractal, Graph and Neural Networks Theories: Vojislav Mitic1; Goran Lazovic2; Chun-An Lu3; Ivana Radovic4; Vesna Paunovic5; Aleksandar Stajcic2; 3:50 PM Branislav Randjelovic6; Srdjan Ribar2; Branislav Vlahovic7; 1University of Nis; Non-Linear Through-Hole Fabrication by Electrochemical Machining: University of Belgrade; 2University of Belgrade; 3Industrial Technology Research Danny Liu1; Brian Skinn1; Andrew Moran1; Stephen Snyder1; Mike Horonzy2; Institute; 4University of Belgrade; VINCA” Institute of Nuclear Sciences - Timothy Hall1; 1Faraday Technology, Inc.; 2Republic Anode Fabricators National Institute of the Republic of Serbia; 5University of Nis; 6University of Nis; University of K. Mitrovica; 7North Carolina Central University 4:10 PM Application of Artificial Neural Network and Statistical Modeling to Study 4:40 PM Water Contact Angle of Ductile Iron: Iron-graphite Composite: Amir Determining Complex Dielectric Properties from Coaxial Transmission Line Kordijazi1; Hathibelagal Roshan1; Pradeep Rohatgi1; 1University of Wisconsin Data Using a Machine Learning Approach: Robert Tempke1; Liam Thomas1; Milwaukee Christina Wildfire2; Dushyant Shekhawat2; Terence Musho1; 1West Virginia University; 2National Energy Technology Laboratory - US Department of Energy Advances in Synthesis and Integration Methods for Enhanced Properties, and Applications in Emerging Nanomaterials — Functional Materials and Nanocomposites Program Organizers: Chang-Yong Nam, Brookhaven National Laboratory; Jung-Kun Lee, University of Pittsburgh; Zubaer Hossain, University of Delaware
Wednesday PM November 4, 2020
2:00 PM Invited Laser Processing of Soft Magnetic Amorphous and Nanocrystalline Alloys: Paul Ohodnicki1; Ahmed Talaat1; Jorg Wiezorek1; 1University of Pittsburgh
56 2:30 PM Invited 2:05 PM Invited Multi-functional Surfaces: Paul Leu1; Sajad Haghanifar1; Anthony Galante1; ACerS-AACS Shepard Award: Small Steps, Occasional Leaps, Significant 1University of Pittsburgh Backslides: Ceramic Compositional Analysis in an Americanist
Archaeological Perspective: Ronald Bishop1; 1Smithsonian Institution; NIST 3:00 PM National Center for Neutron Research Low-reflectivity Carbon Nanotube Coatings for Space Applications: Dan Wang1; Peter Fuqua2; Amber Hennessy2; Alan Hopkins2; Timothy Hall1; Stephen 2:45 PM Snyder1; Maria Inman1; Jennings Taylor1; 1Faraday Technology Inc; 2The Adsorption on Kaolinite Surfaces: A Density Functional Theory (DFT) Aerospace Corporation Approach to Quantifying Interactions Between a Clay Mineral and Small
Molecules: Jessica Heimann1; Joseph Bennett1; Zeev Rosenzweig1; 1University 3:20 PM of Maryland, Baltimore County Investigating the Micro-structure and Transport Mechanisms in Graphene Copper Composites: Raju Ghimire1; Mehran Tehrani1; 1The University of Texas 3:25 PM at Austin; University of New Mexico An Unusual Green Pigment in a Korean Temple Banner: Christina Bisulca1;
Christopher Foster1; Katherine Kasdorf1; Zhongrui (Jerry) Li2; 1Detroit Institute 3:40 PM of Arts; 2University of Michigan Electrical Properties of Transition Metal Chloride Intercalated Carbon- based Materials: Pouria Khanbolouki1; Mehran Tehrani1; 1The University of 4:05 PM Texas at Austin Naturally Altered Glass: Methods and Challenges of Modeling Long-term Glass Alteration Environments: Jamie Weaver1; 1National Institute of Standards and Technology AI for Big Data Problems in Imaging, Modeling and 4:45 PM Synthesis — AI-enabled Materials Characterization Compositional and Structural Analysis of Early Chinese Currencies: Michael Program Organizers: Mathew Cherukara, Argonne National Wall1; Joseph McCool1; Caroline White1; Yuheng Wang1; Marcus Young1; Laboratory; Badri Narayanan, University of Louisville; Subramanian 1University of North Texas Sankaranarayanan, University of Illinois (Chicago) 5:25 PM Wednesday PM November 4, 2020 Cementitious Systems in Roman Reactive Glass Marine Concretes: Marie 1 2 1 1 3 Jackson ; Cory Trivelpiece ; Nanfei Cheng ; Barbara Nash ; Nobumichi Tamura ; 1 2 3 2:00 PM University of Utah; Savannah River National Laboratory; Advanced Light Image Characterization of Self-assembled Photonic Crystals and Glasses Source Using Machine Learning: Bo Lei1; Yen Häntsch2; Gerold Schneider2; Kaline Furlan2; Elizabeth Holm1; 1Carnegie Mellon University; 2Hamburg University of Technology Ceramic and Crystal Materials for Optics and Photonics — Session II 2:20 PM Program Organizers: Yiquan Wu, Alfred University; Jas Sanghera, Naval A Hybrid EBSD Indexing Method Powered by Convolutional Neural Research Laboratory; Akio Ikesue, World-Lab. Co., Ltd; Mark Dubinskiy, Network (CNN) and Dictionary Indexing (DI): Zihao Ding1; Marc De Graef1; Army Research Laboratory; Xiang Hua Zhang, University of Rennes 1Carnegie Mellon University - and - Materials Science Department, University of Arizona; Michael
Squillante, Radiation Monitoring Devices Inc; Long Zhang, Shanghai 2:40 PM Institute of Optical and Fine Mechanics, Chinese Academy of Science; The Composition-microstructure-property Relationship by Machine Takunori Taira, National Institutes of Natural Science Learning: Zongrui Pei1; Michael Gao1; Kyle Rozman1; Tao Liu1; David Alman1; Jeffrey Hawk1; 1National Energy Technology Laboratory Wednesday PM November 4, 2020
3:00 PM Instance Segmentation for Autonomous Detection of Individual Powder 2:00 PM Invited Particles and Satellites in an Additive Manufacturing Feedstock Powder: Giant Micro-photonics toward Table-top XFEL: Takunori Taira1; 1RIKEN Ryan Cohn1; Elizabeth Holm1; 1Carnegie Mellon University SPring-8 / IMS
2:40 PM Invited Microstructural Evolution and Cantilever Bending of AlON Transparent Art and Cultural Heritage: Discoveries and Education 1 1 — Art and Cultural Heritage: Discoveries and Ceramics: Ying Shi ; Shanghai University Education Program Organizers: Glenn Gates, Walters Art Museum; Marie Jackson, University of Utah
Wednesday PM November 4, 2020
2:00 PM Introductory Comments: Art and Cultural Heritage: Glenn Gates1; 1Walters Art Museum
57 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
3:00 PM Invited Coatings to Protect Materials from Extreme Investigations of Materials under Extreme Hydrothermal Conditions Using Environments — Environmental and Thermal Barrier Synchrotron and Complementary Techniques: Robert Mayanovic1; Diwash Coatings II/Aerosol Deposition Dhakal1; Nadib Akram1; Jason Baker2; Xiaofeng Guo3; Hakim Boukhalfa2; Artas 2 4 2 1 2 Program Organizers: Kang Lee, NASA Glenn Research Center; Yutaka Migdissov ; Cheng-Jun Sun ; Hongwu Xu ; Missouri State University; Los Kagawa, High Performance Materials; Daniel Mumm, University of Alamos National Laboratory; 3Washington State University; 4Argonne National California, Irvine; Rodney Trice, Purdue University; Emmanuel Boakye, Laboratory
UES Inc.; Valerie Wiesner, NASA Langley Research Center; Edward Gorzkowski, Naval Research Laboratory; Scooter Johnson, Naval 3:30 PM Research Laboratory; Richard Chromik, McGill University; Jun Song, High-speed X-ray Phase Contrast Imaging Analysis of Microscale Shock McGill University; Christian Moreau, Concordia University; Stephen Yue, Response of a Mock Additively Manufactured Energetic Material: Karla McGill University Wagner1; Amirreza Keyhani1; Andrew Boddorff1; Gregory Kennedy1; Didier Montaigne2; Matthew Beason3; Brian Jensen3; Min Zhou1; Naresh Thadhani1; Wednesday PM November 4, 2020 1Georgia Institute of Technology; 2Eglin Air Force Research Lab; 3Los Alamos
National Lab 2:00 PM Growth Behaviour of TGO Alumina and Silica in Thermal Barrier and Environmental Barrier Coatings: Kuiying Chen1; 1NRC Grain Boundaries, Interfaces, and Surfaces in Functional Materials: Fundamental Structure-Property- 2:20 PM Performance Relationships — Interface Anisotropy Integrated Fluid and Materials Modeling of Environmental Barrier and Interfaces in Ferroelectric/Functional Oxides Coatings: David Newsome1; Rae Waxman1; Andreas Hoffie1; Ashok Raman1; 1 2 1 2 Program Organizers: Catherine Bishop, University of Canterbury; John Debasis Sengupta ; Stewart Silling ; CFD Research Corporation; Sandia Blendell, Purdue University; Shen Dillon, University of Illinois at Urbana- National Laboratory Champaign; Wolfgang Rheinheimer, Purdue University; Ming Tang, Rice 2:40 PM University; Melissa Santala, Oregon State University Aerosol Deposition and Characterization of Sodium Niobate: Eric Patterson1; Wednesday PM November 4, 2020 Scooter Johnson1; Edward Gorzkowski1; 1U.S. Naval Research Laboratory
3:00 PM 2:00 PM Aerosol Deposition Method: Influence of Particle Agglomeration on SiC Anisotropy at Interfaces in Rare-earth Pyrosilicates for High-temperature Film Density: Derek Davies1; Michael Gammage2; Michael Becker1; John Keto1; Coatings: Hadas Sternlicht1; Nitin Padture1; 1Brown University Desiderio Kovar1; 1University of Texas at Austin; 2CCDC DEVCOM Army Research Laboratory 2:20 PM Invited
Implications of Ferroelectricity in Perovskite Solar Cells: Holger Roehm1; 3:20 PM Tobias Leonhard1; Michael Hoffmann1; Alexander Colsmann1; 1Karlsruhe Dry Aerosol Deposition of SiO Coatings for Protection of Polymers in x Institute of Technology Low Earth Orbit: Robert Calvo1; Paul Fuierer1; 1Department of Materials Engineering, New Mexico Institute of Mining and Technology 2:50 PM Effect of Electrode Composition and Potential on Moisture Incorporation and Degradation in Dielectrics and Piezoelectrics: John McGarrahan1; Emergent Materials under Extremes and Decisive Elizabeth Dickey1; 1North Carolina State University
In Situ Characterizations — Decisive In-situ 3:10 PM Invited Characterizations Advanced TEM of Interfaces and Defects in Functional Ceramics: Joachim Program Organizers: Xiaofeng Guo, Washington State University; Xujie Mayer1; 1RWTH Aachen University Lu, Center for High Pressure Science & Technology Advanced Research; Hua Zhou, Argonne National Laboratory; Judith Driscoll, University of 3:40 PM Cambridge; Hongwu Xu, Los Alamos National Laboratory Phase Stability of Sr1-xBaxMnO3 (0 \8804 x \8804 0.5) Films Using Combinatorial Substrate Epitaxy: Catherine Zhou1; Paul Salvador1; Gregory Wednesday PM November 4, 2020 Rohrer1; Marc De Graef1; 1Carnegie Mellon University
2:00 PM Invited Technology Development of In-situ Corrosion Kinetics and Salt Property Measurements: Li Liu1; Jinghua Feng1; Kemal Ramic1; 1Rensselaer Poletechnic Institute
2:30 PM Invited Characterizing Disordered Crystalline Materials with Pauling’s Rules: Eric O’Quinn1; Kurt Sickafus1; Rodney Ewing2; Gianguido Baldinozzi3; Joerg Neuefeind4; Matthew Tucker4; Antonio Fuentes5; Devon Drey1; Maik Lang1; 1University of Tennessee; 2Stanford University; 3Université Paris-Saclay; 4Oak Ridge National Laboratory; 5Cinvestav Unidad Saltillo
58 3:00 PM High Entropy Materials: Concentrated Solid Solution, Glass-ceramics as Potential Waste Forms for Actinide Immobilization: Intermetallics, Ceramics, Functional Materials and Yingjie Zhang1; Tao Wei1; Zhaoming Zhang1; Linggen Kong1; Pranesh Dayal1; Daniel Gregg1; 1ANSTO Beyond — Processing and Properties Program Organizers: Xingbo Liu, West Virginia University; Michael 3:30 PM Gao, National Energy Technology Laboratory; Peter Liaw, University of Substitutional Effect of Na O with K O on the Viscosity and Structure of Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, 2 2 CaO-SiO -CaF -based Mold Flux Systems: MinSeok Seo1; Il Shon1; 1Yonsei Alfred University; Yu Zhong, Worcester Polytechnic Institute 2 2 University
Wednesday PM November 4, 2020 4:00 PM
Advances in Polymer-assisted Sol-gel Synthesis of Aluminosilicate Precursors 1 2 2:00 PM Invited for Modern Cementitious Materials: Juan Pablo Gevaudan ; Jaqueline Wallat ; 2 2 1 2 Highly Tunable Mechanical and Magnetic Properties in an Al0.3CoFeNi Bimala Lama ; Wil V. Srubar ; Pennsylvania State University; University of Complex Concentrated Alloy: Sriswaroop Dasari1; Varun Chaudhary2; Bharat Colorado at Boulder Gwalani1; Abhinav Jagetia1; Vishal Soni1; Stephane Gorsse3; Raju Ramanujan2; Rajarshi Banerjee1; 1University of North Texas; 2Nanyang Technological University, Singapore; 3University of Bordeaux, France Manufacturing and Processing of Advanced Ceramic Materials — Processing of Oxide Ceramics 2:20 PM Program Organizers: Bai Cui, University of Nebraska-Lincoln; Mike Corrosion Resistant Property Improvement of CoCrFeNiMoTi-based Alexander, Allied Mineral Products, Inc.; Eric Faierson, Quad City High Entropy Alloy by Optimizing Composition: Tatsuya Kimura1; Hiroshi Manufacturing Laboratory - Western Illinois University; James Hemrick, Shiratori1; Kazuya Shinagawa1; Kosuke Kuwabara2; Yuzo Daigo2; 1HITACHI; Reno Refractories Inc.; Keith DeCarlo, Blasch Precision Ceramics 2Hitachi Metals
Wednesday PM November 4, 2020 2:40 PM Invited Effect of Interstitial Nitrogen on the Phase Stability, Strengthening, Mechanical Behavior in TRIP-assisted High-entropy Alloys: Kenta 2:00 PM Invited Yamanaka1; Manami Mori2; Yusuke Onuki3; Shigeo Sato3; Akihiko Chiba1; Investigating the Dependence of Microstructure Evolution in Alumina on the 1 2 3 Tohoku University; National Institute of Technology, Sendai College; Ibaraki Liquid Phase Chemistry in the CaO-Al2O3-SiO2 System: Densification, Grain University Growth and Secondary Phase Formation: Sarah Whipkey1; William Carty1; 1Alfred University 3:00 PM Effect of Milling Parameters on Microstructure and Mechanical Properties 2:40 PM Invited of Mechanically Alloyed, Refractory High Entropy Alloy: Joshua Smeltzer1; Opportunities for Tailored Grain Boundary Networks in Thermomagnetically Christopher Marvel1; B. Hornbuckle2; Anit Giri2; Kristopher Darling2; Martin Processed Alumina Ceramics: Amanda Krause1; Bryan Conry1; Michael Kesler2; Harmer1; 1Lehigh University; 2U.S. Army Research Laboratory 1University of Florida; 2Oak Ridge National Laboratory
3:20 PM Invited 3:20 PM Thermal Stability of Refractory High Entropy Alloys at Intermediate Self-bonded Refractories for Investment Casting Mold Manufacture: David 1 1 1 1 Price1; 1IC Ceramic Consulting, LLC Temperatures: Ke Jin ; Nannan Jia ; Yunfei Xue ; Beijing Institute of Technology 3:40 PM Invited 3:40 PM Fabricating alumina with heterogeneous microstructure using integrated ζ-Factor Microanalysis, a Quantitative Chemical Analysis Technique for additive/subtractive manufacturing (IASM): Xiao Geng1; Jincheng Lei1; the Characterization of High Entropy Alloys: Christopher Marvel1; Joshua Shenglong Mu1; Hai Xiao1; Jianhua Tong1; Rajendra Bordia1; Fei Peng1; 1 2 2 2 1 1Clemson University Smeltzer ; Anit Giri ; B. Hornbuckle ; Kristopher Darling ; Martin Harmer ; 1Lehigh University; 2U.S. Army Research Lab 4:20 PM Optimized Etching of Porcelain and Polycrystalline Alumina with a Glass Phase: Sarah Whipkey1; Max Modugno1; Hyojin Lee1; William Carty1; 1Alfred Journal of the American Ceramic Society Awards University Symposium — Session II Program Organizer: William Fahrenholtz, Missouri University of Science and Technology Metallurgy and Magnetism — Metallurgy and Wednesday PM November 4, 2020 Magnetism I Program Organizers: Nicholas Jones, Naval Surface Warfare Center, Carderock Division; Paul Lambert, Naval Surface Warfare Center, 2:00 PM Carderock Division Thermochemical Investigation of Lithium Borate Glasses and Crystals: Alexandra Navrotsky1; Lili Wu2; Anastasia Koryttseva2; Christoph Grob3; Wednesday PM November 4, 2020 1Arisona State University; 2University of California, Davis; 3Schott AG
2:30 PM 2:00 PM Introductory Comments: Metallurgy and Magnetism: Nicholas Jones1; Effect of 2CaF , B2O3 and the CaO/SiO2 Mass Ratio on the Viscosity and 1 1Naval Surface Warfare Center, Carderock Division Structure of B2O3–Containing Calcium–silicate–based Melts: Gihyun Kim ; Il Sohn2; 1The University of Tokyo; 2Yonsei University
59 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
2:05 PM 1:50 PM Processing of Fe-Co Alloys: Past and Present: Zafer Turgut1; Alex Leary2; John The Incorporation and Adhesion of Bioactives in Layer-by-Layer (LbL) Horwath1; Gregory Kozlowski3; 1AFRL/RQQM; 2NASA Glenn Research Center; Films: Ashleigh Abbott1; Greg Hilmas1; 1Missouri University of Science and 3Wright State University Technology
2:25 PM The Effect of Deformation of Low Alloy Steels Used in Metallurgy on Their Multi-material Additive Manufacturing: Processing and Magnetic Characteristics: Borys Sereda1; Dmytro Sereda1; Vitalyy Volokh1; Vladimir Sukhomlyn1; 1Dneprovsky State Technical University Heterogeneous Materials Design — AM of Functionally Graded & Dissimilar Materials 2:45 PM Program Organizers: Hang Yu, Virginia Polytechnic Institute and State Microstructural Development and Mechanical Property Changes Due to University; Steven Boles, Hong Kong Polytechnic University; Michael Temper Embrittlement in HY-80 Submarine Steel: Charles D’Ambra1; Jason Gibson, Desktop Metal; Lonnie Love, Oak Ridge National Laboratory; Schibler1; Michele Manuel1; Thomas Krause2; Aroba Saleem1; 1University Leon Prentice, CSIRO Metal Industries of Florida, Department of Materials Science and Engineering; 2Royal Military College of Canada Wednesday PM November 4, 2020
3:05 PM Effects of Steel Sensitization on Magnetic Properties Measured through 2:00 PM MOKE Magnetometry: Nicholas Jones1; Olaf van ‘t Erve2; Emily Guzas3; Experimental-computational Approach for The Design of Functionally 1 1 Matthew Roberts1; 1Naval Surface Warfare Center, Carderock Division; 2Naval Graded Materials by Additive Manufacturing: Allison Beese ; Zi-Kui Liu ; 1 1 1 Research Laboratory; 3Naval Undersea Warfare Center, Division Newport Brandon Bocklund ; Lourdes Bobbio ; Pennsylvania State University
3:25 PM 2:30 PM Modeling the Magnetostructural Interactions in Austenitic Steels at the Gradient Microstructure and Local Mechanical Properties of a γ-TiAl/ Quantum Mechanical Level: Michelle Johannes1; Noam Bernstein1; Edwin [Ti]_2AlNb Dual Alloy Produced by Laser Direct Metal Deposition: Haoxiu 1 1 1 Antillon1; 1Naval Research Laboratory Chen ; Yu Zou ; University of Toronto
3:45 PM 2:50 PM Processing of Vitreous Fe-based Wires into Nanostructured Soft Magnetic Additive Manufacturing Design of Functionally Graded Materials: Noah 1 1 1 1 1 1 2 3 1 Sargent ; Xin Wang ; Kun Li ; Wei Xiong ; University of Pittsburgh Material: Ayodele Olofinjana ; James Kern ; Nyok Voo ; University of the Sunshine Coast; 2The Welding Institute; 3Universiti Brunei Darussalam 3:10 PM 4:05 PM Precision Forming of FGMs via Directed Energy Deposition and Alloy Development Feeder: Kevin Luo1; 1FormAlloy Rapid Thermal Processing of Amorphous and Nanocrystalline Soft Magnetic 1 1 2 1 Alloys: Paul Ohodnicki ; Ahmed Talaat ; David Greve ; University of Pittsburgh; 3:30 PM 2 DWGreve Consulting Wire-arc Additive Manufacturing of Inconel 740H Superalloy – P91 Steel Bimetallic Structures: Microstructure Characterization and Post-Heat Treatment Design: Soumya Sridar1; Xin Wang1; Michael Klecka2; Wei Xiong1; MS&T Student Events — 1University of Pittsburgh; 2United Technologies Research Center MA Speaking Contest Semi-finals
Nanotechnology for Energy, Environment, Electronics, Wednesday PM November 4, 2020 Healthcare and Industry — Nanotechnology for
Energy, Environment, Electronics, Healthcare and 1:00 PM Industry - Session II The Failure Behind the Chaos: Gladys Duran1; Monserrat Lopez-Cornejo1; Program Organizers: Gary Pickrell, Virginia Tech; Navin Manjooran, 1Instituto Tecnologico de Morelia Solve Technology and Research, Inc.
1:10 PM Wednesday PM November 4, 2020 1 1 1 Tiny Scale, Remarkable Effect: Shuyi Liu ; Fei Chen ; Wuhan University of Technology 2:00 PM Invited 1:20 PM Effect of CuO/MgO Ratio on the Gene Expression, Cytocompatibilty, and Dissipative Assembly of Nanoparticles for Reconfigurable Optical Materials Antibacterial/Analgesic/ Anticancerous Drug Loading Kinetics for the 1 1 1 and Sensing Systems: Justin Hughes ; Isabel Lloyd ; University of Maryland, Mesoporous Bioactive Glasses: Gurbinder Kaur1; 1Simon Fraser University College Park 2:30 PM 1:30 PM Multifunctional Exfoliated 2-D Oxides for Charge Storage: Madeleine Flint1; Thermal Atomic Layer Deposition for Future Application in Transition Peter Metz1; Robert Koch1; Peng Gao1; Alec Ladonis1; Scott Misture1; 1Alfred 1 1 1 Metal Dichalcogenides: Raivat Singhania ; Laura Moyer ; Lehigh University University
1:40 PM 2:50 PM Improving Materials for Pulp Capping Using Sodium Metasilicate Glass: Electrochemical Reactivity of 2D Confined Metallocenes: Michael Spencer1; 1 1 1 Jerry Howard ; Krista Carlson ; University of Utah 1 North Carolina State University
60 2:50 PM Solid State Processing of Metals and Composites — Molecular Modeling of Surface Exchange Mechanisms in Solid Oxide Fuel Cell Cathodes: Dane Morgan1; Yipeng Cao1; 1University of Wisconsin-Madison Session I Program Organizers: Ajay Kumar P., Indian Institute of Technology 3:10 PM Tirupati; Pradeep Menezes, University of Nevada, Reno; Satish Kailas, Ellingham Diagram to Assess Synthesis Conditions and Chemical Stability Indian Institute of Science (IISc), Bangalore; N Venkaiah, Indian 1 Institute of Technology Tirupati; Venkata Kiran Degala, Indian Institute of of Ceramic Membranes under Operational Conditions: Armin Feldhoff ; 1Leibniz University Hannover Technology Tirupati 3:30 PM Wednesday PM November 4, 2020 Thermodynamics and Elastic Properties of Cerium Doped Yttrium
Aluminum Garnets: Vitaliy Goncharov1; Nian Wei2; Miu Lau3; Albert Migliori4; 2:00 PM Hongwu Xu4; Min Long3; Xiaofeng Guo1; 1Washington State University; Surface Modification of Supersonic Particle Deposited 316L Stainless Steel 2Sichuan University; 3Boise State University; 4Los Alamos National Laboratory through Friction-Stir Processing: Alessandro Ralls1; Pradeep Menezes1; Prasad Kalvala1; Ashish Kasar1; Pankaj Kumar1; Manoranjan Misra1; Mohammadreza Daroonparvar1; 1University of Nevada, Reno Additive Manufacturing of Metals: Complex
2:20 PM Microstructures and Architecture Design — 7075 Aluminum Graphene Composites Made by Shear Assisted Processing Microstructure Characterization and Novel Materials and Extrusion: Xiao Li1; Xiaolong Ma1; Dalong Zhang1; Timothy Roosendaal1; Program Organizers: Yu Zou, University of Toronto; Hang Yu, Virginia Polytechnic Institute and State University Angel Ortiz1; 1Pacific Northwest National Laboratory
2:40 PM Thursday AM November 5, 2020
Development of Spare Parts and Components for Aerospace Engineering out of Heavily Deformed Steels: Valeriy Mishchenko1; Anna Ben2; Anton Matiukhin2; 8:00 AM Invited Vitalii Shyrokobokov2; Sergey Sheyko1; Elena Kulabneva2; 1Zaporizhzhia Synchrotron X-ray Studies on Additive Manufacturing and Materials: Tao National University; 2National University “Zaporizhzhia polytechnic” Sun1; 1University of Virginia
3:00 PM 8:30 AM Evaluation of Factors of Cold Plastic Deformation Influence on the Increase Application of Photodiode Sensor for Contour Extraction of Part Features of Mechanical Properties of the Shaving Steel for a Milling Cutting Tool: 1 1 1 2 2 2 in the Laser Powder Bed Fusion Process: Yuri Plotnikov ; Mark White ; Kyle Valeriy Mishchenko ; Anton Matiukhin ; Anna Ben ; Vitalii Shyrokobokov ; Snyder1; Marcus Thoreson1; John Sions1; 1CCAM Sergey Sheyko1; Elena Kulabneva2; 1Zaporizhzhia National University; 2“Zaporizhzhia Polytechnic” National University 8:50 AM
Control of Nanoscale Lamellae in Bulk Al-Cu Eutectic Samples Through 3:20 PM Laser Powder Bed Fusion: Jonathan Skelton1; James Fitz-Gerald1; Jerrold Solid State Joining of Dissimilar Ni-based Superalloys via Field Assisted Floro1; 1University Of Virginia Sintering Technology for Turbine Applications: Charis Lin1; Namiko Yamamoto1; Derek King2; Jogender Singh1; 1The Pennsylvania State University; 9:10 AM 2UES, Inc. Mitigating Stray Grain Nucleation during the Laser Powder Bed Fusion of Single Crystal CMSX-4: Joseph Aroh1; Amir Mostafaei2; Joseph Pauza1; Runbo Jiang1; Jerard Gordon1; Anthony Rollett1; 1Carnegie Mellon University; 2Illinois Institute of Technology Thermodynamics of Materials in Extreme Environments — Thermodynamics and Stability of 9:30 AM Mateirals for Fuel Cells and Other Energy Applications Microstructural Features and Mechanical Properties of a Newly Designed Program Organizers: Xiaofeng Guo, Washington State University; Steel Fabricated by Laser Powder Bed Fusion: Yuan Tian1; Robert Palad2; Kristina Lilova, Arizona State University; Kyle Brinkman, Clemson Clodualdo Jr. Aranas2; 1Voestalpine Additive Manufacturing Ltd.; 2University of University; Alexandra Navrotsky, Arizona State University; Jake New Brunswick Amoroso, Savannah River National Laboratory; Xingbo Liu, West Virginia University; Gustavo Costa, NASA Glenn Research Center
Wednesday PM November 4, 2020
2:00 PM Invited Helium Irradiation of Gd2Zr2O7 Defect-fluorite Ceramics: Interfacial Phenomena and Radiation Resistance: Zhangyi Huang1; Jianqi Qi1; Xiaofeng Guo2; Tiecheng Lu1; Di Wu2; 1Sichuan University; 2Washington State University
2:30 PM
Density Functional Theory Modeling on the Positive Effect of2 H O in Hydrogen Oxidation Reaction on Perovskite Anode for Solid-oxide Fuel Cells: Yueh-Lin Lee1; Qi He2; Tao Yang1; Wenyuan Li2; Wei Li2; Liang Ma2; Shanshan Hu2; Yuhua Duan3; Xingbo Liu2; Gregory Hackett3; 1Leidos Research Support Team at National Energy Technology Laboratory; 2West Virginia University; 3National Energy Technology Laboratory
61 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:20 AM Additive Manufacturing: Alloy Design to Develop New Influence of the Surface Condition on the Fatigue Performance of Alloy UNS Feedstock Materials — Session III N07718 Produced via Selective Laser Melting: Madison Wooldridge1; Helmuth Sarmiento Klapper1; Christoph Wangenheim1; 1Baker Hughes Program Organizers: Joseph McKeown, Lawrence Livermore National Laboratory; Aurelien Perron, Lawrence Livermore National Laboratory; Manyalibo Matthews, Lawrence Livermore National Laboratory; Christian 8:40 AM Leinenbach, Empa, Swiss Federal Laboratories for Materials Science Effect of Heat Treatment on Additively Manufactured Ni-based Superalloys: 1 1 1 2 3 and Technology; Peter Hosemann, University of California Colleen Hilla ; Michael Mills ; Wei Zhang ; Alfred Okello ; Alber Sadek ; Hyeyun Song4; 1The Ohio State University; 2GE Additive; 3Edison Welding Thursday AM November 5, 2020 Institute ; 4Edison Welding Institute
8:00 AM Invited Coatings to Protect Materials from Extreme Opportunities to Improve the Mechanical Properties of Titanium Alloys Produced by Laser Powder Bed Fusion: Marco Simonelli1; Graham McCartney1; Environments — Coatings for Harsh Environments Program Organizers: Kang Lee, NASA Glenn Research Center; Yutaka Nesma Aboulkhair1; Yau Yau Tse2; Adam Clare1; Richard Hague1; 1University of Kagawa, High Performance Materials; Daniel Mumm, University of Nottingham; 2Loughborough University California, Irvine; Rodney Trice, Purdue University; Emmanuel Boakye, 8:30 AM Invited UES Inc.; Valerie Wiesner, NASA Langley Research Center; Edward Microstructure and Property Variability in DED Inconel 718 as a Function Gorzkowski, Naval Research Laboratory; Scooter Johnson, Naval Research Laboratory; Richard Chromik, McGill University; Jun Song, of Build Rate: Bernard Gaskey1; Ekta Jain1; Yong Chen Yeoh1; Guido Macchi2; 2 1 1 McGill University; Christian Moreau, Concordia University; Stephen Yue, Antonio Mattia Grande ; Matteo Seita ; Nanyang Technological University; McGill University 2Politecnico di Milano
9:00 AM Thursday AM November 5, 2020
Micro-crack Mitigation by Alloy Modification in the Additively Manufactured 1 1 Ni-base Superalloy CM247LC: Christian Leinenbach ; Seth Griffiths ; Hossein 8:00 AM 2 2 1 1 1 Tabasi ; Toni Ivas ; Xavier Maeder ; Anthony De Luca ; Kai Zweiacker ; Rafal Direct-writing by Micro Cold Spray of Yttria (Y2O3) Films for Reactive 1 2 2 1 Wrobel ; Jamasp Jhabvala ; Roland Logé ; Empa, Swiss Federal Laboratories for Metal Casting: Aidan Moyers1; Desiderio Kovar1; Michael Becker1; John Keto1; 2 Materials Science and Technology; Ecole Polytechnique Fédérale de Lausanne 1University of Texas at Austin (EPFL) 8:20 AM 9:20 AM Electrodeposited NiMo Coatings for Improved Molten Salt Reactor Processing of Y2O3-modified Nickel Superalloy by Selective Laser Melting.: Performance: Rajeswaran Radhakrishnan1; Kamyar Ahmadi2; Timothy Hall1; 1 2 2 1 Anthony De Luca ; Christoph Kenel ; David Dunand ; Christian Leinenbach ; Stephen Snyder1; Stephen Raiman3; 1Faraday Technology Inc; 2University of 1 2 EMPA; Northwestern University Houston; 3Oak Ridge National Laboratory
9:40 AM 8:40 AM Development And Application of Thermodynamic Tools for AM Alloy Obtaining Surface Coatings Providing Protection Against High Temperatures 1 1 1 1 Design: Aurelien Perron ; Bey Vrancken ; Nicholas Calta ; Tien Roehling ; in the Production of Coke: Borys Sereda1; Dmytro Sereda1; Aleksandr 1 1 1 1 John Roehling ; Thejaswi Tumkur Umanath ; Joel Berry ; Joseph McKeown ; Gaydaenko1; 1Dneprovsky State Technical University Manyalibo Matthews1; 1Lawrence Livermore National Laboratory 9:00 AM 10:00 AM Obtaining Wear-resistant Titanium Coatings in SHS Conditions: Borys Application of Taguchi, Response Surface, and Artificial Neural Networks Sereda1; Dmytro Sereda1; Irina Palehova1; 1Dneprovsky State Technical for Rapid Optimization of Direct Metal Laser Sintering Process: Ebrahim University Asadi1; Behzad Fotovvati1; Faridreza Attarzadeh1; 1University of Memphis
Integration between Modeling and Experiments for Additive Manufacturing: Materials, Alloy Development, Crystalline Metals: From Atomistic to Macroscopic Microstructure and Properties — Additive Scales II — Session IV Manufacturing of Other Miscellaneous Materials Program Organizers: Mariyappan Arul Kumar, Los Alamos National Program Organizers: Prashanth Konda Gokuldoss, Tallinn University Of Laboratory; Irene Beyerlein, University of California, Santa Barbara; Technology; Zhi Wang, South China University of Technology; Jurgen Levente Balogh, Queen’s University; Josh Kacher, Georgia Institute Eckert, Erich Schmid Institute of Materials Science; Filippo Berto, of Technology; Caizhi Zhou, University of South Carolina; Lei Cao, Norwegian University of Science and Technology University of Nevada
Thursday AM November 5, 2020 Thursday AM November 5, 2020
8:00 AM Invited 8:00 AM Invited Microstructure and Property of Additively Manufactured Nickel-based Synchrotron X-ray Tools for Multiscale Studies of Microstructure Evolution: Superalloy: Guofeng Wang1; Brian Gleeson1; 1University of Pittsburgh 1 1 1 1 1 Matthew Wilkin ; Yueheng Zhang ; Yufeng Shen ; He Liu ; Anthony Rollett ; Robert Suter1; 1Carnegie Mellon University
62 8:30 AM Invited Experimental Capabilities at High Pressure Collaborative Access Team Metallurgy and Magnetism — Metallurgy and (HPCAT) for In-situ and In-operando Characterization of Pressure/Stress Magnetism II Induced Microstructural Changes in Materials: Dmitry Popov1; Nenad Program Organizers: Nicholas Jones, Naval Surface Warfare Center, Velisavljevic2; 1HPCAT, X-ray Science Division, Argonne National Laboratory; Carderock Division; Paul Lambert, Naval Surface Warfare Center, 2Physics Division-Physical & Life Sciences Directorate, Lawrence Livermore Carderock Division National Laboratory Thursday AM November 5, 2020 9:00 AM Characterization of 3-D Slip Fields in Deforming Polycrystals: Darren Pagan1; Kelly Nygren2; Matthew Miller3; 1Pennsylvania State University; 2Cornell High 8:00 AM Energy Synchrotron Source; 3Cornell University Comparative Studies on the Structure and Magnetic Properties of Mechanically Alloyed Fe40Co30Ni30 Medium-entropy Alloy in Argon 9:20 AM and Ambient Atmospheres: Alex Paul1; Anuj Rathi1; Tanjore Jayaraman1; Diffraction Elastic Constants from Electron Backscatter Diffraction Data 1University of Michigan-Dearborn and Finite Element Models: Adam Creuziger1; Thomas Gnaupel-Herold1; Alex Bien1; Stephen Langer1; Andrew Reid1; 1National Institute of Standards and 8:20 AM Technology Improvement of the Magnetic Characteristics of Materials Due to the Formation of Unidirectional Boundaries of Ferrite during Processing in SHS 9:40 AM Invited Conditions: Borys Sereda1; Dmytro Sereda1; Vitalyy Volokh1; 1Dneprovsky State Combining Multi-scale Modeling and Three-Dimensional Diffraction Technical University to Investigate Chemical and Displacement Ordering in Metallic Alloys: Yu Wang1; Yongmei Jin1; Yang Ren2; Xiaoxu Guo1; Liwei Geng1; 1Michigan 8:40 AM Technological University; 2Argonne National Laboratory Development of FeCo/MnZn Ferrite Composite by Field Assisted Sintering Technique: Bowen Dong1; Gabriel Santillan2; Matthew Willard1; 1Case Western 10:10 AM Reserve University; 2Powdermet Inc. Investigating the Microstructural Origins of Hydrogen Effects on Deformation and Fracture: Coleman Alleman1; Christopher San Marchi1; Brian 9:00 AM Kagay1; 1Sandia National Laboratories Exchange Coupled Ferromagnetism in Nanochessboards Obtained By Eutectoid Decomposition in the Co-Pt and Fe-Pt Systems: Adrian Savovici1; Eric Vetter2; William Soffa1; Jerrold Floro1; 1University of Virginia; 2NCSU
Manufacturing and Processing of Advanced Ceramic 9:20 AM Materials — Processing of Carbides, Borides, and Magnetic Performance of Gas-atomized Maraging Steel Powders: Ganesh Chlorides Varma Thotakura1; Ramasis Goswami2; Tanjore Jayaraman1; 1University of Program Organizers: Bai Cui, University of Nebraska-Lincoln; Mike Michigan-Dearborn; 2Naval Research Laboratory Alexander, Allied Mineral Products, Inc.; Eric Faierson, Quad City Manufacturing Laboratory - Western Illinois University; James Hemrick, 9:40 AM Reno Refractories Inc.; Keith DeCarlo, Blasch Precision Ceramics The Influence of the Microstructure Obtained After Processing in SHS Conditions on the Magnetic Characteristics of Steels: Borys Sereda1; Dmytro Thursday AM November 5, 2020 Sereda1; Vitalyy Volokh1; Vladimir Sukhomlyn1; Irina Kruglyak1; 1Dneprovsky State Technical University
8:00 AM Invited A Progress Report on the Synthesis and Characterization of MAX and MAB MS&T20 Plenary Session — Phases: Surojit Gupta1; 1University of North Dakota TMS/ASM Distinguished Lectureship in Materials and 8:40 AM Invited Society Design, Synthesis and Processing of Novel Ionic Conductors for All-solid- state Batteries: Hailong Chen1; 1Georgia Institute of Technology Thursday AM November 5, 2020
9:20 AM Invited Synthesis and Flash Sintering of (Hf1-xZrx)B2 Solid Solution Fine Powders: 11:00 AM Jose Belisario1; Santanu Mondal1; Iman Khakpour1; Alexander Franco1; Andriy Introductory Comments: MS&T20 Plenary Session: Thomas Battle1; 12020 Durygin1; Zhe Cheng1; 1Florida International University TMS President
10:00 AM 11:05 AM Plenary Thermal Stability and Mechanical Properties of High-entropy Carbide Integrating Materials and Manufacturing: Charles Ward1; 1Air Force Research Ceramics with Submicron Grain Size Fabricated by Spark Plasma Sintering: Laboratory Fei Wang1; Xiang Zhang1; Xueliang Yan1; Yongfeng Lu1; Michael Nastasi1; Yan Chen2; Bai Cui1; 1University of Nebraska Lincoln; 2Oak Ridge National 11:45 AM Laboratory Concluding Comments & Award Presentation: MS&T20 Plenary Session: Thomas Battle1; 12020 TMS President
63 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
8:50 AM Multi-material Additive Manufacturing: Processing and Pressure-induced Anomalous Phase Transition Behavior in Layered Heterogeneous Materials Design — Recent Progress Tellurene: Arunima Singh1; Han Li1; Kedi Wu1; Sijie Yang1; Tara Boland1; Bin Chen1; Sefaattin Tongay1; 1Arizona State University in Multi-Material AM Program Organizers: Hang Yu, Virginia Polytechnic Institute and State 9:10 AM University; Steven Boles, Hong Kong Polytechnic University; Michael Stabilities and Ultrafast Dynamics of Sub-nanometer Metal Oxide Clusters: Gibson, Desktop Metal; Lonnie Love, Oak Ridge National Laboratory; Scott Sayres1; 1Arizona State University Leon Prentice, CSIRO Metal Industries
Thursday AM November 5, 2020 MS&T Student Events — MA Speaking Contest Finals
8:00 AM Thursday PM November 5, 2020 Microstructural Characterization of a Metal Matrix Composite Manufactured via Hybrid Approach of Jetting and Selective Laser Melting: To be Announced Milad Ghayoor1; Bryce Cox1; Brian Paul1; Joshua Gess1; Somayeh Pasebani1; 1Oregon State University
8:30 AM The Materials Genome Initiative and Materials R&D in Aluminum Powders for Additive Manufacturing: Yoshiki Hashizume1; 1TOYO the 2020s Alunimium K.K. Program Organizer: James Warren, National Institute of Standards and Technology
Nanotechnology for Energy, Environment, Electronics, Friday AM November 6, 2020
Healthcare and Industry — Nanotechnology for Energy, Environment, Electronics, Healthcare and 10:30 AM Industry - Session III Presentations and Panel Discussion: James Warren1; 1National Institute of Program Organizers: Gary Pickrell, Virginia Tech; Navin Manjooran, Standards and Technology Solve Technology and Research, Inc.
Thursday AM November 5, 2020 Advanced Coatings for Wear and Corrosion Protection
— Poster Session Program Organizers: Evelina Vogli, Lm Group Holdings Inc.; Fei Tang, 8:00 AM DNV GL Designing Non-precious Transition Metal/Nitrogen Doped Carbon 1 1 1 Nanocatalysts for CO2 Reduction: Guofeng Wang ; Boyang Li ; University Tuesday AM November 3, 2020 of Pittsburgh
8:20 AM High-performance Boron-based Coatings Alloyed with Chrome to Protect Removal of 4,6-dinitro-o-cresol Pesticide from Aqueous Solutions via Against Wear and Corrosion: Borys Sereda1; Dmytro Sereda1; 1Dneprovsky Magnetic Filtration Using Octanoate and Stearate Capped Magnetite and State Technical University Nickel Ferrite Nanoparticles: Allen Apblett1; Tarek Trad2; 1Oklahoma State University; 2Sam Houston State University Advanced Steel Metallurgy — Poster Session Program Organizers: Chirag Mahimkar, Big River Steel; Justin Raines, Thermodynamics of Materials in Extreme SSAB Americas; Kip Findley, Colorado School of Mines; Alla Sergueeva, Environments — Thermodynamics at the Nanoscale NanoSteel Company Inc; Daniel Branagan, The NanoSteel Co and Interfaces Program Organizers: Xiaofeng Guo, Washington State University; Tuesday AM November 3, 2020
Kristina Lilova, Arizona State University; Kyle Brinkman, Clemson University; Alexandra Navrotsky, Arizona State University; Jake Advanced Characterization of Wear Resistant Steel: Anastasia July1; Luis Amoroso, Savannah River National Laboratory; Xingbo Liu, West Virginia 1 1 1 University; Gustavo Costa, NASA Glenn Research Center Simoes ; C. Garcia ; University of Pittsburgh
Thursday AM November 5, 2020
8:00 AM Invited Ab-initio Studies of Point Defects in Alumina under Electrochemical Conditions: Aditya Sundar1; Liang Qi1; 1University of Michigan
8:30 AM Nanomaterials from Geopolymer, a Low-temperature Ceramics: Dong-Kyun Seo1; 1Arizona State University
64 Advances in Dielectric Materials and Electronic Coating and Thin Film Materials for Energy, Devices — Poster Session Aerospace, Environment and Biological Applications Program Organizers: Amar Bhalla, University of Texas; Ruyan Guo, — Poster Session University of Texas at San Antonio; Rick Ubic, Boise State University; Program Organizers: Jing Zhang, Indiana University – Purdue University Danilo Suvorov, Jožef Stefan Institute Indianapolis; Yeongil Jung, Changwon National University; Albert Feuerstein, Praxair Surface Technologies, Inc. (retired); Raymond Tuesday AM November 3, 2020 Sinatra, Rolls-Royce Corporation (retired); Li Li, Rolls-Royce Corporation
Tuesday AM November 3, 2020 Concentration Dependent Dielectric Behavior of [In, Ta] Dipole Pair 1 1 Substituted BaTiO3 Ceramics: Ian Chedzoy ; Evan Merkey ; Natalia Betancur- Granados2; Kaijie Ning1; Jorge Tobón3; Oscar Restrepo3; Holly Shulman1; Steven Germanium Monochalcogenide Nanosheets as Anode in Metal-ion Batteries: Pilgrim1; Walter Schulze1; Steven Tidrow1; 1Alfred University; 2Alfred University/ Shakir Bin Mujib1; Maren Ellis1; Sophie Justus1; Porter Herold1; Gurpreet Singh1; Colombia National University Medillin; 3Colombia National University Medillin 1Kansas State University
Investigation of Relaxor-like Ferroelectrics in [Sc, Ta] Dipole-pair Infiltration Behavior of Calcium Magnesium Alumina-Silicate (CMAS) in 1 1 Substituted BaTiO3 Ceramics: Benjamin Conley ; Victoria Pellegrino ; Wesley Thermal Barrier Materials of YSZ, LZ, and LZ–YSZ Composite: Guanlin Senn1; William Hogan1; Kaijie Ning1; Holly Shulman1; Steven Pilgrim1; Walter Lyu1; Dowon Song2; Junseong Kim1; Janghyeok Pyeon1; SeungCheol Yang1; Schulze1; Steven Tidrow1; 1Alfred University Yeon-Gil Jung1; 1Changwon National University; 2Hanyang University
Relaxor-like Behavior in Dipole-Pair [Y, Ta] Substituted BaTiO3 Ceramics: Numerical Simulation of Temperature Swing Effect in Silica Reinforced Victoria Pellegrino1; Benjamin Conley1; Kaijie Ning1; Holly Shulman1; Steven Porous Anodized Aluminum Coatings: Abhilash Gulhane1; Jian Zhang1; Pilgrim1; Walter Schulze1; Steven Tidrow1; 1Alfred University Zhe Lu2; Bong-Gu Kim3; Yeon-Gil Jung3; Jing Zhang1; 1Indiana University –
Purdue University Indianapolis, Indiana; 2University of Science and Technology The Synthetic Diamonds Electrical Conductivity with Fractal Correction: Liaoning; 3Changwon National University Vojislav Mitic1; Goran Lazovic2; Vesna Paunovic3; Ivana Radovic4; Aleksandar Stajcic2; Markus Mohr5; Hans Fecht5; 1University of Belgrade; University of Nis; 2 3 4 University of Belgrade; University of Nis; University of Belgrade; VINCA” Coatings to Protect Materials from Extreme Institute of Nuclear Sciences - National Institute of the Republic of Serbia; 5Ulm University Environments — Poster Session Program Organizers: Kang Lee, NASA Glenn Research Center; Yutaka Kagawa, High Performance Materials; Daniel Mumm, University of California, Irvine; Rodney Trice, Purdue University; Emmanuel Boakye, Ceramic and Crystal Materials for Optics and UES Inc.; Valerie Wiesner, NASA Langley Research Center; Edward Photonics — Poster Session Gorzkowski, Naval Research Laboratory; Scooter Johnson, Naval Program Organizers: Yiquan Wu, Alfred University; Jas Sanghera, Naval Research Laboratory; Richard Chromik, McGill University; Jun Song, Research Laboratory; Akio Ikesue, World-Lab. Co., Ltd; Mark Dubinskiy, McGill University; Christian Moreau, Concordia University; Stephen Yue, Army Research Laboratory; Xiang Hua Zhang, University of Rennes McGill University - and - Materials Science Department, University of Arizona; Michael Squillante, Radiation Monitoring Devices Inc; Long Zhang, Shanghai Tuesday AM November 3, 2020 Institute of Optical and Fine Mechanics, Chinese Academy of Science; Takunori Taira, National Institutes of Natural Science Aerosol Deposition of Hexagonal and Cubic Boron Nitride: Eric Patterson1; Tuesday AM November 3, 2020 Heonjune Ryou1; Scooter Johnson1; Edward Gorzkowski1; 1U.S. Naval Research Laboratory
3+ Self Activated Ca3Si2O7 + Ca2SiO4:Dy Phosphors Derived from Agro-food 1 1 1 Wastes: Manmeet Kaur ; Kulvir Singh ; Thapar Institute of Engineering and Computation Assisted Materials Development for Technology Improved Corrosion Resistance — Poster Session Program Organizers: Rishi Pillai, Oak Ridge National Laboratory; Christopher Taylor, Dnv Gl Ceramics and Glasses Simulations and Machine Learning — Poster Session Tuesday AM November 3, 2020 Program Organizers: Mathieu Bauchy, University of California, Los Angeles; Peter Kroll, University of Texas at Arlington; N. M. Anoop Krishnan, Indian Institute of Technology Delhi Applying Machine Learning to Determine the Corrosion Resistance of Alloys: Szu-Chia Chien1; Wolfgang Windl1; Gerald Frankel1; 1The Ohio State Tuesday AM November 3, 2020 University
Defect Formation and Self-diffusion in Alumina: Computational Approaches: Andy Chen1; Michael Finnis2; Arthur Heuer1; 1Case Western Reserve University; 2Imperial College London
Verification of Mn Local Structure in Manganese Lithium Borate-based Glass by Computer Simulations and X-ray Absorption Spectroscopy: Pattarapong Nijapai1; 1School of Physics, Suranaree University of Technology
65 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Controlled Synthesis, Processing, and Applications High Entropy Materials: Concentrated Solid Solution, of Structural and Functional Nanomaterials — Poster Intermetallics, Ceramics, Functional Materials and Session Beyond — Poster Session Program Organizers: Haitao Zhang, University of North Carolina at Program Organizers: Xingbo Liu, West Virginia University; Michael Charlotte; Gurpreet Singh, Kansas State University; Kathy Lu, Virginia Gao, National Energy Technology Laboratory; Peter Liaw, University of Tech; Edward Gorzkowski, Naval Research Laboratory ; Jian Shi, Tennessee; Jian Luo, University of California, San Diego; Yiquan Wu, Rensselaer Polytechnic Institute; Kejie Zhao, Purdue University ; Alfred University; Yu Zhong, Worcester Polytechnic Institute Michael Naguib , Tulane University; Sanjay Mathur, University of Cologne Tuesday AM November 3, 2020
Tuesday AM November 3, 2020 Full “Ab-initio” Simulation of Field Evaporation of High Entropy Alloys: Jiayuwen Qi1; Christian Oberdorfer1; Emmanuelle Marquis2; Wolfgang Windl1; Rheological Dynamics of Liquid Crystal-coupled Nanocomposites under 1The Ohio State University, Department of Materials Science and Engineering; 1 1 Influence of Thermal Gradients: Albree Weisen ; Harini Sridharan ; Joshua 2University of Michigan, Department of Materials Science and Engineering Seylar1; Ruel McKenzie1; 1The University of Akron - Department of Polymer Engineering Integration between Modeling and Experiments for Crystalline Metals: From Atomistic to Macroscopic Functional Defects in Electroceramic Materials — Scales II — Poster Session Poster Session Program Organizers: Mariyappan Arul Kumar, Los Alamos National Program Organizers: Hui Xiong, Boise State University; Hua Zhou, Laboratory; Irene Beyerlein, University of California, Santa Barbara; Argonne National Laboratory; Yanhao Dong, Massachusetts Institute of Levente Balogh, Queen’s University; Josh Kacher, Georgia Institute Technology of Technology; Caizhi Zhou, University of South Carolina; Lei Cao, University of Nevada Tuesday AM November 3, 2020
Tuesday AM November 3, 2020
Energetic Landscape of Functionally Modified 2D Nano-ceramics for Energy Storage: Cody Cockreham1; Xianghui Zhang1; Gengnan Li1; Hongwu Xu2; Di Development of a Reactive Forcefield to Model Cu-Ni Alloy Oxidation Wu1; 1Washington State University; 2Los Alamos National Laboratory and Surface Segregation in Thermal Conditions: Richard Garza1; Matthew Curnan1; Meng Li1; Wissam Saidi1; 1University of Pittsburgh Grain Boundaries, Interfaces, and Surfaces in Functional Materials: Fundamental Structure-Property- Interfaces and Phase Transformations — Poster Performance Relationships — Poster Session Session Program Organizers: Catherine Bishop, University of Canterbury; John Program Organizers: Arun Devaraj, Pacific Northwest National Blendell, Purdue University; Shen Dillon, University of Illinois at Urbana- Laboratory; Matthias Militzer, University of British Columbia; Matthew Champaign; Wolfgang Rheinheimer, Purdue University; Ming Tang, Rice Steiner, University of Cincinnati; Mohsen Zaeem, Colorado School of University; Melissa Santala, Oregon State University Mines; Yufeng Zheng, University of Nevada, Reno
Tuesday AM November 3, 2020 Tuesday AM November 3, 2020
The Impact of Metastable Grain Boundary States on Mobility in FCC Metal: Computing the Free Energy and Mobility of Cylindrical Interfaces: Anqi Yutong Bi1; Ian Chesser1; Elizabeth Holm1; 1Carnegie Mellon University Qiu1; Ian Chesser1; Elizabeth Holm1; 1Carnegie Mellon University
Thermal Property of Diamond Thin Film on Si (100) Substrate: Chunyan Refining Alpha Microstructure via Dual-phase Interface and Twin Boundary Zhang1; Joseph P. Feser1; Chaoying Ni1; 1University of Delaware in Beta Titanium Alloys: Dian Li1; Xing Zhang2; Yiliang Liao2; Stoichko
Antonov3; Yufeng Zheng1; 1University of Nevada, Reno; 2Iowa State University; Vacancy-enhanced Grain Boundary Migration: Shuozhi Xu1; Dengke Chen2; 3Max Planck Insitut fur Eisenforschung GmbH Yashashree Kulkarni3; 1University of California, Santa Barbara; 2Georgia Institute of Technology; 3University of Houston Late News Poster Session — Biomaterials
Tuesday AM November 3, 2020
A Novel Prototype of Bioactive Ceramic Scaffold for Bone Regeneration: Yrina Viatela1; Erika Lopez1; Miguel Prado1; Vanesa Biolatti1; Carolina Bagnato2; 1National Atomic Energy Commission; 2National Council of Scientific and Technological Research
66 Late News Poster Session — Ceramic and Glass Micro- and Nano-Mechanical Behavior of Materials — Materials Poster Session Program Organizers: Sundeep Mukherjee, University of North Tuesday AM November 3, 2020 Texas; Mahmoud Baniasadi, Georgia Southern University; Meysam Haghshenas, University of Toledo
Effect of SiC and CNT on thermal stability of HfB2–ZrB2 Based Ultra High Tuesday AM November 3, 2020 1 1 2 Temperature Composites: Shruti Dubey ; Kantesh Balani ; Ambreen Nisar ; 1Indian Institute of Technology; 2Florida International University Atomistic Simulations of Collisions between SiC Nanoparticles: Kevin Single and Multi-dopant Diffusion in YAG Ceramics for Lasers: Thomas Kayang1; Alexey Volkov1; 1University of Alabama Rudzik1; Zachary Seeley1; Nerine Cherepy1; Stephen Payne1; 1Lawrence Livermore National Lab Characterization of Fatigue Damage Behavior in Unidirectional Carbon Fiber Reinforced Plastic Laminates: Akihiro Kudou1; Satoshi Kobayashi1; Toshiko Osada1; 1Tokyo Metropolitan University
Late News Poster Session — Fundamentals and Cyclo[18]carbon as an Ultra-flexible Material: Siyuan Fang1; Yun Hang Hu1; Characterization 1Michigan Technological University
Tuesday AM November 3, 2020 Diffusion Induced Abnormal Softening Behaviors in Nanocrystals: Sixue 1 1 1 1 Zheng ; Xiang Wang ; Scott Mao ; University of Pittsburgh
1 Microstructural Evolution and Mechanical Properties of a Cu-2.7at.%Zr Mechanical Behavior of Resilin-mimicking Materials: Annaliza Perez-Torres ; 1 1 1 Fuqian Yang ; University of Kentucky Alloy Processed by High-Pressure Torsion: Kenta Miyamoto ; Takahiro Kunimine1; 1Kanazawa University Mechanical Properties of Hybrid Core-shell Ceramic Nanoparticles: Kevin Kayang1; Alexey Volkov1; 1University of Alabama
Materials Design through AI Composition and Process Processing, Characterization, and Modeling of Nano-twinned Alloys: Optimization — Poster Session Understanding the Role that Controlling and Tuning of Microstructure has in Dislocation-twin Interactions: Francisco Andrade Chávez1; Orcun Koray Program Organizers: Noah Paulson, Argonne National Laboratory; 1 1 1 1 Tiberiu Stan, Northwestern University; Brandon Bocklund, Pennsylvania Celebi ; Huseyin Sehitoglu ; Jessica Krogstad ; University of Illinois at Urbana- Champaign State University; Arun Kumar Mannodi Kanakkithodi, Argonne National Laboratory Small-Scale Mechanical Behavior of Ion-irradiated Amorphous Metals versus Multi-Principal Alloys: Maryam Sadeghilaridjani1; Vahid Hasannaeimi1; Tuesday AM November 3, 2020 Shristy Jha1; Sundeep Mukherjee1; 1University of North Texas
Twinning and Detwinning in Small-sized Crystals: Xiang Wang1; Scott Mao1; A Physics-informed AI Assistant for Atomic Layer Deposition: Noah Paulson1; 1University of Pittsburgh Angel Yanguas-Gil1; Steven Letourneau2; Jeffery Elam1; 1Argonne National Laboratory; 2ASM
AI-driven Discovery of Novel High Entropy Semiconductor Alloys: Arun Multiscale Modeling of Microstructure Deformation in Kumar Mannodi Kanakkithodi1; Xueying Li2; David Fenning2; Maria Chan1; Material Processing — Poster Session 1Argonne National Laboratory; 2University of California San Diego Program Organizers: Lukasz Madej, AGH University of Science and Technology; Jaimie Tiley, AFRL/RXLMD; Krzysztof Muszka, AGH Enabling Process Optimization Using High-throughput Machine Learning- 1 1 1 University of Science and Technology; Danuta Szeliga, AGH University of based Image Analysis: Tiberiu Stan ; Peter Voorhees ; Northwestern University Science and Technology
Tuesday AM November 3, 2020 Materials Informatics for Images and Multi- dimensional Datasets — Poster Session Development of the Coupled Cellular Automata/Finite Difference Model of Program Organizers: Amanda Krause, University of Florida; Kristen 1 Brosnan, General Electric Research; Alp Sehirlioglu, Case Western Phase Transformation during Continuous Cooling: Mateusz Sitko ; Maciej 1 1 1 1 Reserve University Pietrzyk ; Danuta Szeliga ; Lukasz Madej ; AGH University of Science and Technology Tuesday AM November 3, 2020
Identifying Crack Initiation Sites with CNNs: Katelyn Jones1; Elizabeth Holm1; Anthony Rollett1; 1Carnegie Mellon University
Keyhole Porosity Threshold in Laser Melting Revealed by High-Speed X-ray Imaging: Runbo Jiang1; Benjamin Gould2; Andy Ramlatchan3; Joseph Aroh1; Anthony Rollett1; 1Carnegie Mellon University; 2Argonne National Laboratory; 3NASA Langley Research Center
67 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Next Generation Biomaterials — Poster Session 12th International Symposium on Green and Program Organizers: Roger Narayan, University of North Carolina; Sustainable Technologies for Materials Manufacturing David Dausch, RTI International; Sanjiv Lalwani, Lynntech, Inc. and Processing — Poster Session Program Organizers: Surojit Gupta, University of North Dakota; Rajiv Tuesday AM November 3, 2020 Asthana, University of Wisconsin; Mritunjay Singh, Ohio Aerospace
Institute; Tatsuki Ohji, AIST; Enrico Bernardo, University of Padova; 3D Printed Porous Tissue Engineering Scaffolds with the Self-folding Ability Zhengyi Fu, Wuhan University of Technology; Hisayuki Suematsu, Nagaoka University of Technololgy; Tatami Junichi, Yokohama national and Controlled Release of Growth Factor: Jiahui Lai1; Junzhi Li1; Min Wang1; university; Yiquan Wu, Alfred University; Allen Apblett, Oklahoma State 1University of Hong Kong University 3D Printed Strontium-doped Alginate-collagen Scaffolds for Bone Tissue Engineering: Shams Khondkar1; Naomi Edwards1; Azhar Ilyas1; 1New York Tuesday PM November 3, 2020 Institute of Technology
Biocompatible Ceramics Based on Hydrated Calcium Phosphates: Tatiana An Alternative Optimization Route for the Recovery of Stainless Steel 1 2 Safronova1; Gilyana Kazakova1; Otabek Toshev1; Andrey Kiselev1; Tatyana Alloying Elements: Diego Santa Rosa Coradini ; Ana Rabelo de Lima ; Rüdiger 2 3 1 3 Shatalova1; Irina Selezneva2; Vladimir Zaitsev3; 1Lomonosov Moscow State Deike ; Victor Bridi Telles ; Helmut Antrekowitsch ; José Roberto de Oliveira ; 1 2 3 University; 2Institute of theoretical and experimental biophysics of RAS; 3Priorov Montauniversty Leoben; University of Duisburg-Essen; Instituto Federal do National Medical Research Center of Traumatology and Orthopedics Espirito Santo
Powder Mixtures of Calcium Hydroxyapatite and Potassium Hydrosulfate for Producing Biocompatble Ceramics: Tatiana Safronova1; Gilyana Kazakova1; 2020 Undergraduate Student Poster Contest — 2020 Marat Akhmedov2; Tatyana Shatalova1; Snezhana Tikhonova1; 1Lomonosov Undergraduate Student Poster Contest Moscow State University; 2A.N. Kosygin State University of Russia (Technology. Design. Art) Tuesday PM November 3, 2020
Thermodynamic Properties, Structure and Phase Additive Manufacturing of Titanium-based Functionally Graded Materials: Experiment Characterization and FEA Modeling: Yang Liu1; 1WHUT Stabilities of Special Alloys — Poster Session Program Organizers: Erwin Povoden-Karadeniz, TU Wien CDL-IPE; Alloying MnGeTe2 Enables High Thermoelectric Performance: Grace Rome1; Ernst Kozeschnik, Vienna University of Technology 1Colorado School of Mines
Tuesday AM November 3, 2020 Analysis of High Entropy Ceramics Prepared via Steric Entrapment and Funding support provided by: MatCalc Engineering GmbH, Vienna Solid-state Sintering Methods: Crystal Structure: Madeline Loveday1; Matheus Pianassola1; Merry Koschan1; Charles Melcher1; Mariya Zhuravleva1; 1University of Tennessee, Knoxville
Depiction of Electro-optical Characteristics in CdSexTe1-x by Curbing Comparative Study of Transport propeties of Bismuth Sulfide with Different Content And Short-Range Pattern: Bishal Dumre1; Nathan Szymanski2; Vijaya Dopants: Farheen Anjum1; 1IIT Kanpur
Adhikari1; Indiras Khatri1; Daniel Gall3; Sanjay Khare1; 1The University of Crack Driving Force Expressions Using Compliance Approach in Clamped Toledo; 2University of California, Berkeley; 3Rensselaer Polytechnic Institute Beam Bending Geometry: Tejas Chaudhari1; Ashwini Mishra1; Hrushikesh Determination of the Activation Energy of the Formation of Intermetallic Sahasrabuddhe1; Nagamani Jaya Balila1; 1IIT Bombay
Compounds in the Ni-Al and Ti-Al System Upon Receipt of Special Alloys: Crystal Structure and Lithium Ionic Transport Behavior of Li Site Doped Borys Sereda1; Dmytro Sereda1; Yuriy Belokon2; Ivan Babko1; 1Dneprovsky State Li7La3Zr2O12: Qianshun Cui1; 1Wuhan University of Technology Technical University; 2ZNU
Developing Materials and Coating Technologies for Mitigation of Lunar Sodium Pnictogen Chalcogenides for Thermoelectric and Photovoltaic Dust Adhesion and Abrasion: Dylan Lew1; Nicolas Fransen2; Valerie Wiesner3; Applications: Ishan Khare1; Nathan Szymanski2; Daniel Gall3; Richard Irving1; Christopher Wohl3; Lopamudra Das4; 1Carnegie Mellon University; 2Purdue 1Department of Physics and Astronomy, University of Toledo; 2Department University; 3NASA Langley Research Center; 4National Institute of Aerospace of Materials Science and Engineering, University of California, Berkeley; 3Department of Materials Science and Engineering, Rensselaer Polytechnic Development of a Blast Furnace Simulator: Adam Binder1; Nicholas Institute Rheinheimer1; 1Purdue University Northwest
Effect of Aspect Ratio on Stress Intensity Factor Solutions for Single Edge Notch Wire Fracture Test Specimen under Tensile and Clamped Bend Loading Conditions: Hrushikesh Sahasrabuddhe1; Ashwini Mishra1; Nagamani Jaya Balila1; 1India Institute of Technology Bombay
Efficient and Stable Perovskite Solar Cells via Surface Passivation ofan Ultrathin Hydrophobic Organic Molecular Layer: Xiaofeng Gao1; 1Wuhan University of Technology
68 Innovative Preparation Methods of High Performance Magnetically Strength Improvement of The Ceramic Core by Applying Dual Polymers Responsive Photonic Crystals: Linxin Huang1; 1Wuhan University of In 3D Printing Process: Hyun-Hee Choi1; Bong-Gu Kim1; Hye-Yeong Park1; Technology Junseong Kim1; SeungCheol Yang1; Yeon-Gil Jung1; Jing Zhang2; 1Changwon
National Univerisity/ Department of Materials Science and Engineering; 2Indiana Maximizing Magnetostriction in Fe-Ga-Zr Nanocrystalline Alloys: Ria University-Purdue University Indianapolis Nandwana1; Matthew Willard1; Yumi Ijiri2; 1Case Western Reserve University; 2Oberlin College Probabilistic Process Design of Laser Powder Bed Fusion Using Coupled
Monte Carlo and Inverse First Order Reliability Method: Lingbin Meng1; Nanocrystalline Magnetic Metallic Microwave Absorbents Working at Xuehui Yang1; Xiaoping Du1; Brandon McWilliams2; Jing Zhang1; 1Indiana Elevated Temperature: Shuaiwei Guo1; 1Wuhan University of Technology University - Purdue University Indianapolis; 2CCDC Army Research Laboratory
Origin of the Phase Transition in Lithium Garnets: Lu Xinqi1; 1Functionally Virtual Reality Module for Additive Manufacturing Education: Jing Zhang1; Graded Materials Glorio Singui1; Shambhuraj Wadghule1; Xuehui Yang1; Jian Zhang1; Chauncey Quantitatively Accounting for the Effects of Surface Topography on the Frend1; 1Indiana University - Purdue University Indianapolis Oxidation Kinetics of Additive Manufactured Hastelloy X Processed by Electron Beam Melting: Matthew Kuner1; Marie Romedenne2; Patxi Fernandez- Zelaia2; Sebastien Dryepondt2; 1Georgia Institute of Technology; 2Oak Ridge Additive Manufacturing of Ceramic-based Materials: National Laboratory Process Development, Materials, Process Optimization and Applications — Poster Session Supercritical Synthesis of VO2 Nanoparticles For Smart Window Films: Robert Spurling1; Elizabeth Rasmussen1; Mai Tran1; Jie Li1; 1Argonne National Program Organizers: Lei Chen, University of Michigan-Dearborn; Xuan Laboratory Song, University of Iowa; Nahum Travitzky, University of Erlangen- Nuremberg; Yiquan Wu, Alfred University; Paolo Colombo, University of Padova; Rajendra Bordia, Clemson University; Long-Qing Chen, Unique S-scheme Heterojunctions in Self-assembled TiO2/CsPbBr3 Hybrids 1 1 Pennsylvania State University for CO2 Photoreduction: Kai Meng ; Wuhan University of Technology Tuesday PM November 3, 2020
Additive Manufacturing Modeling and Simulation: AM Materials, Processes, and Mechanics — Poster Effects of Printing Parameters on Density And Mechanical Properties Session of Binder Jet 3D Printed WC-Co: Katerina Kimes1; Pierangeli Rodriguiz1; Program Organizers: Jing Zhang, Indiana University – Purdue University Danielle Brunetta1; Drew Elhassid2; Markus Chmielus1; 1University of Pittsburgh; Indianapolis; Brandon Mcwilliams, US Army Research Laboratory; Li 2General Carbide Ma, Johns Hopkins University Applied Physics Laboratory; Yeongil Jung, Changwon National University Hybrid Additive Manufacturing Technology Applied to Si3N4 Freeform Components Fabrication: Anna De Marzi1; Johanna Schmidt2; Sarah Diener3; Tuesday PM November 3, 2020 Giorgia Franchin1; Paolo Colombo1; 1Department of Industrial Engineering, Università degli Studi di Padova; 2Schunk GmbH; 3Kyocera Fineceramics Precision GmbH Creep Modeling of 3D Printed 718 Nickel Alloys: Harshal Dhamade1; Abhilash Gulhane1; Jian Zhang1; Bong-Gu Kim2; Yeon-Gil Jung2; Jing Zhang1; 1Indiana Temporary Coating for Binder Jet 3D Printed Tungsten Carbide-Cobalt University - Purdue University Indianapolis; 2Changwon National University Parts: Pierangeli Rodriguez De Vecchis1; Katerina Kimes1; Drew Elhassid2; Markus Chmielus1; 1University of Pittsburgh; 2General Carbide Fabrication of Ceramic Core for Single Crystal Casting of Gas Turbine Blade: Hye-Yeong Park1; Eun-Hee Kim1; SeungCheol Yang1; Hyun-Hee Choi1; Jing 2 1 1 2 Zhang ; Yeon-Gil Jung ; Changwon National University; Indiana University – Additive Manufacturing: Qualification and Certification Purdue University Indianapolis — Poster Session Mechanical and Surface Properties of Inconel 718 Alloy Fabricated by Program Organizers: Faramarz Zarandi, Raytheon Technologies; Jacob Additive Manufacturing: Junseong Kim1; Dowon Song2; Yun kon Joo3; Guanlin Hochhalter, University of Utah; Douglas Wells, NASA / Marshall Space Lyu3; SeungCheol Yang3; Jing Zhang1; Yeon-Gil3; 1Indiana University - Purdue Flight Center; Richard Russell, NASA Kennedy Space Center; Mohsen University Indianapolis; 2Hanyang University; 3Changwon National University Seifi, ASTM International/Case Western Reserve University; Eric Ott, GE Additive; Mark Benedict, Air Force Research Laboratory; Craig Brice, Experimental and Modeling Study of Gas Adsorption in Metal-organic Colorado School Of Mines; J Hector Sandoval, Lockheed Martin Framework Coated on 3D Printed Plastics: Tejesh Dube1; Jian Zhang1; Bong- Gu Kim2; Yeongil Jung2; Jing Zhang1; 1Indiana University – Purdue University Tuesday PM November 3, 2020 Indianapolis; 2Changwon National University
Modeling of Electron Beam Physical Vapor Deposition Process for Influence of Printing Parameters within the Binder-powder Interaction: 1 2 Trenton Colton1; Nathan Crane1; 1Brigham Young University Fabricating Thermal Barrier Coatings: Anvesh Dhulipalla ; Yafeng Li ; Jian 1 3 3 1 1 Zhang ; Hye-Yeong Park ; Yeon-Gil Jung ; Jing Zhang ; Indiana University - Post-build Heat Treatment of Wire-arc Additive Manufactured 410 SS for 2 3 Purdue University Indianapolis; Tianjin Polytechnic University; Changwon Hardness Tuning: Girish Padhy1; Winston Kam1; Matthew Willard1; James National University 1 2 2 2 McGuffin-Cawley ; Michael Kottman ; Bradley Barnhart ; Badri Narayanan ; Modeling of Impact Property of 3D Printed 718 Nickel Alloys: Sugrim Sagar1; 1Case Western Reserve University; 2Lincoln Electric. Inc Jian Zhang1; Junseong Kim2; Yeon-Gil Jung2; Jing Zhang1; 1Indiana University - Purdue University Indianapolis; 2Changwon National University
69 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Advanced Characterization of Materials for Nuclear, Sintering and Related Powder Processing Science and Radiation, and Extreme Environments — Poster Technologies — Poster Session Session Program Organizers: Wolfgang Rheinheimer, TU Darmstadt; Ricardo Program Organizers: Samuel Briggs, Oregon State University; Castro, University of California, Davis; Zachary Cordero, Rice University; Christopher Barr, Sandia National Laboratories; Emily Aradi, University Eugene Olevsky, San Diego State University of Huddersfield; Michael Short, Massachusetts Institute of Technology; Janelle Wharry, Purdue University; Cheng Sun, Idaho National Tuesday PM November 3, 2020 Laboratory; Dong Liu, University of Oxford; Khalid Hattar, Sandia
National Laboratories On the Bending of High-aspect Ratio Freestanding Aerosol Jet Printed 1 Tuesday PM November 3, 2020 Micropillar Arrays during Thermal Sintering: Sandra Ritchie ; Mohammad 1 1 1 Saleh ; Rahul Panat ; Carnegie Mellon University
Effects of Post-Processing Variability on Radiation Response of Additively- The Effect of Texturing by Applied Magnetic Field on Grain Growth of 1 2 1 1 Manufactured HT9: Pengyuan Xiu1; Niyanth Sridharan2; Kevin Field1; Alumina: Bryan Conry ; Michael Kesler ; Amanda Krause ; University of 2 1University Of Michigan; 2Lincoln Electric Florida; Oak Ridge National Laboratory
Investigation of Uranium Silicide Fuel Form Additions through Rietveld Refinement and Internal Standard P-XRD: Zachary Acosta1; Cole Synthesis, Characterization, Modeling and Moczygemba1; Elizabeth Sooby Wood1; 1The University of Texas at San Antonio Applications of Functional Porous Materials — Poster Session Program Organizers: Lan Li, Boise State University; Winnie Wong-Ng, Late News Poster Session — Energy National Institute of Standards and Technology; Kevin Huang, University of South Carolina Tuesday PM November 3, 2020
Tuesday PM November 3, 2020
Silicon Carbon Nitride (SiCN) and Silicon Oxycarbide (SiOC) Functionalization of Molybdenum Disulfide (MoS2) as Stable Battery Development of Nanostructured Vycor Glass Microspheres for Doxorubicin Electrodes: Davi Marcelo Soares1; Gurpreet Singh1; 1Kansas State University, Administration: Bryan Escalante Castro1; Yanina Martinez1; Guillermo Alan Levin Department of Mechanical and Nuclear Eng. Zampieri1; Yrina Viatela1; 1Natinal Atomic Energy Comission
70 INDEX
A Anderson, K ...... 17, 18, 20, 24, 49 Bakkar, S ...... 16 Andersson, J...... 46 Balani, K ...... 67 Aaldenberg, E...... 19 Andrade Chávez, F...... 67 Balasubramanian, G...... 25, 36, 41 Abbott, A...... 60 Angilella, A...... 45 Balaya, P...... 12 Abbott, R...... 52 Anjum, F...... 68 Baldinozzi, G...... 58 Abdallah, I...... 17 An, K ...... 41, 51 Bale, H...... 21, 28 Abdalla, M...... 22 Ankit, K...... 17, 50 Balicas, L...... 15 Abdolrahim, N...... 18, 29 Antillon, E...... 60 Balila, N...... 68 Abernathy, H...... 32 Antonov, S...... 18, 66 Ballard, T...... 39, 55 Aboulkhair, N...... 45, 54, 62 Antrekowitsch, H...... 68 Balogh, L...... 32, 42, 50, 62, 66 Abrahamson, J ...... 23 Aouadi, S...... 16 Baltrus, J ...... 24 Abranovic, B...... 14 Apblett, A...... 12, 25, 36, 45, 64, 68 Banerjee, A ...... 37 Abranovich, B...... 54 Apostolov, Z ...... 13 Banerjee, R ...... 22, 59 Achanta, V...... 19 Arabi-Hashemi, A ...... 45 Bang, S...... 28, 39 Acharya, R...... 13 Aradi, E...... 27, 38, 47, 55, 70 Baniasadi, M...... 21, 33, 43, 67 Acierno, A...... 48 Aramide, O...... 22 Bansah, C...... 48 Ackelid, U...... 14, 26, 37, 46, 54 Aranas, C...... 61 Bansal, N...... 16, 29 Acosta, Z...... 70 Araujo Tunes, M...... 17 Bao, Y...... 36 Adair, J...... 36 Ard, J ...... 44 Barberi, J...... 53 Adegoke, O...... 46 Arnold, A...... 56 Barcikowski, S...... 46 Adeosun, S...... 22 Arnold, B...... 31, 52, 56 Barnard, H...... 29 Adhikari, V...... 68 Aroh, J...... 23, 34, 53, 61, 67 Barnhart, B ...... 69 Afshar, A...... 33 Arroyave, R...... 22, 42, 50, 54 Barr, C ...... 27, 38, 47, 55, 70 Agar, J...... 33 Arslanoglu, M...... 35 Barrie, F...... 27 Agarwal, A...... 20, 52 Arul Kumar, M...... 32, 42, 50, 62, 66 Barry, D...... 33, 34 Agnew, S ...... 30, 31 Aryal, S...... 41 Bartha, K...... 35 Agrawal, A...... 32 Asadi, E...... 26, 54, 62 Basak, A...... 13, 27, 36 Agrawal, D...... 23, 34 Ashcroft, I...... 45 Basu, D...... 26 Ahmadi, K...... 20, 47, 62 Asthana, R...... 12, 20, 25, 36, 45, 68 Batista, E ...... 53 Ahmadzadeh, M...... 50 Attallah, M...... 34 Battle, T...... 63 Aindow, M...... 24, 54 Attarian Shandiz, M...... 53 Bauchy, M...... 16, 19, 29, 32, 48, 65 Aitkaliyeva, A...... 17, 29 Attarzadeh, F...... 62 Bayati, P...... 46 Akai, Y...... 35 Atulya, G...... 21 Beale, K ...... 31 Akhmedov, M...... 68 Auyeskhan, U...... 43 Beaman, J...... 14, 26 Akram, N...... 58 Ayello, F...... 44 Beason, M...... 58 Akturk, S...... 24 Ayers, N...... 23 Beauchamp, C...... 15 Al-ajrash, S ...... 45 Ayoola, H...... 31 Beauchamp, S...... 15 Alarcon, J...... 14 Ayoub, G ...... 39, 42 Bechetti, D...... 20, 38, 51 Ales, T ...... 54 Becker, B ...... 22 Alexander, M...... 42, 51, 59, 63 B Becker, G...... 39 Allan, S...... 13, 26, 45 Becker, M...... 58, 62 Alleman, C...... 63 Babko, I ...... 68 Babu, S...... 15, 54 Beck, P...... 47, 55 Allen, A...... 24 Beese, A...... 15, 25, 32, 54, 60 Alman, D...... 57 Bacca, N...... 52 Bae, C...... 48 Begley, M...... 13, 15, 26, 37 AlMangour, B...... 26, 53 Belak, J...... 13 Alqahtani, F...... 45 Bagnato, C...... 66 Bahl, S ...... 32 Belgasam, T...... 42 Al-Temimy, A...... 29 Belhadi, J...... 39 Alyasari, A...... 34 Bahr, D...... 21, 42 Bai, X...... 17 Belisario, J...... 63 Amin-Ahmadi, B...... 27 Belokon, Y...... 25, 43, 68 Aminu, T...... 21 Bakas, M ...... 42 Baker, A...... 27 Ben, A...... 61 Amoroso, J...... 44, 53, 61, 64 Benedict, M...... 15, 27, 37, 69 Amroussia, A ...... 38 Baker, D...... 36 Baker, J...... 19, 50, 53, 58 Ben-Hamu, G...... 47 71 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Bennett, J...... 57 Bourell, D ...... 42 Campbell, C...... 46 Berman, D...... 16 Bowden, D...... 55 Campbell, Q ...... 32 Bernardo, E...... 12, 25, 36, 45, 68 Bowes, P...... 19 Canumalla, R...... 32 Bernier, J...... 23 Boyce, B...... 15, 26 Cao, L...... 32, 42, 50, 62, 66 Bernstein, N ...... 60 Braatz, A ...... 38 Cao, W...... 17 Berry, J...... 24, 62 Bracker, G...... 45, 56 Cao, Y...... 61 Berto, F...... 14, 26, 37, 46, 54, 62 Brackett, T...... 40 Capolungo, L...... 42 Bertsch, K ...... 18, 30, 37, 40 Brady, M...... 24 Caputo, M...... 48 Besmann, T...... 44, 49 Branagan, D...... 28, 38, 48, 55, 64 Carden, S...... 31 Betancur-Granados, N...... 65 Brand, R...... 50 Carloni, D...... 49, 51 Betolatti, D ...... 14 Brankovic, S...... 47 Carlson, K...... 60 Beuth, J...... 14, 21, 26, 36, 37, 45, 54 Breeuwer, N...... 28 Carney, C...... 19 Beyerlein, I ...... 32, 42, 50, 51, 62, 66 Brennan, R...... 16 Carpenter, J...... 15, 26, 37, 39 Bhalla, A ...... 39, 48, 56, 65 Brennecka, G...... 48, 56 Carrillo-Baeza, J...... 45 Bhardwaj, N...... 13 Brewer, G...... 35 Carroll, M ...... 17 Bhattacharya, R...... 49 Brice, C...... 15, 27, 37, 69 Carter, A ...... 23 Bhattacharyya, J...... 30 Bridi Telles, V...... 68 Carty, W...... 35, 59 Bhowmick, S...... 33 Briggs, S...... 27, 38, 47, 55, 70 Caruntu, G...... 56 Bianco, M...... 14 Brinkman, K...... 39, 44, 49, 53, 61, 64 Casalegno, V...... 20 Bian, H...... 35 Brittan, A...... 47, 55 Caseres, L...... 18 Bieler, T...... 38 Britt, C...... 15 Castaneda, H...... 13, 24 Bien, A...... 63 Brochu, M...... 53 Castro, R ...... 23, 35, 50, 70 Binder, A...... 68 Brockway, M...... 21 Cazottes, S...... 38 Binion, A...... 15 Brodin, H...... 46 Celebi, O ...... 67 Binner, J...... 12, 25 Brogan, J ...... 38 Cersoli, T...... 47 Biolatti, V...... 66 Brosnan, K...... 33, 52, 67 Chakraborty, P...... 50 Birkner, N ...... 44 Brown, A...... 22 Chamary, S ...... 13 Biros, G ...... 36 Brown, B ...... 26 Champagne, V ...... 13, 56 Bishop, C...... 28, 45, 50, 51, 58, 66 Brown, C...... 26 Chandrasekar, S ...... 15 Bishop, R...... 57 Browning, C ...... 45 Chandrashekhara, K ...... 15 Bisulca, C...... 57 Brown, S...... 45 Chang-Davidson, E...... 36, 54 Bi, Y...... 66 Brueckner, F ...... 54 Chang, L...... 53 Bleck, W...... 48 Brunetta, D...... 13, 69 Chang, S...... 31 Blendell, J...... 50, 58, 66 Bugnet, M...... 38 Chan, M...... 67 Boakye, E...... 49, 58, 62, 65 Bull, A ...... 44 Chanut, R...... 27 Bobbio, L...... 60 Bultman, S...... 17 Chao, Z...... 28 Bocklund, B...... 32, 42, 60, 67 Bumgardner, C...... 16, 22, 47, 55 Chariton, S...... 50 Boddorff, A...... 58 Burns, A...... 40 Chaudhari, T...... 68 Boehlert, C ...... 38 Burns, J...... 18, 30, 44 Chaudhary, V...... 59 Boesl, B ...... 20 Butler, B...... 34 Chauhan, G...... 25 Bogan, J...... 31 Butler, T...... 34 Chawla, N...... 40 Boileau, J...... 40 Chedzoy, I...... 65 Boin, M ...... 48 C Chehade, A...... 42 Bokisa, G...... 47 Cabaud, C...... 49 Chen, A...... 65 Boland, T...... 64 Caccia, M...... 16 Chen, B ...... 64 Boles, S...... 43, 52, 60, 64 Cady, N ...... 28 Chen, D...... 55, 66 Boman, J ...... 40 Cai, W ...... 18, 30, 40 Chen, F...... 51, 60 Bordia, R...... 13, 26, 44, 59, 69 Caldwell, A ...... 27 Cheng, C...... 33 Borkar, T...... 24, 35, 56 Calhoun, C ...... 18 Cheng, J...... 32 Botu, V...... 16 Caliskan, S...... 40 Cheng, L...... 37 Botzenhart, U...... 54 Calta, N...... 14, 62 Cheng, N...... 57 Boukhalfa, H...... 53, 58 Calvo, R...... 58 Cheng, Z ...... 63 72 INDEX
Chen, H...... 46, 60, 63 Cockayne, E...... 24 Dai, S ...... 29 Chen, I...... 51 Cockreham, C...... 24, 30, 66 D’Aiuto, F...... 16 Chen, J...... 20, 24 Cohn, R...... 15, 57 D’Ambra, C...... 60 Chen, K...... 50, 58 Collins, P...... 54 Dancer, C...... 23 Chen, L...... 13, 26, 48, 69 Colombo, P...... 13, 26, 69 Daneu, N...... 39 Chen, M...... 21 Colsmann, A...... 58 Dankházi, Z...... 33 Chen, Q...... 27, 31, 37 Colton, T...... 69 Dante, J ...... 18 Chen, W...... 38, 41, 49 Compton, B...... 13 Darling, K...... 59 Chen, X ...... 49 Conley, B...... 65 Daroonparvar, M...... 61 Chen, Y ...... 24, 44, 51, 54, 63 Conry, B...... 23, 59, 70 Dasari, S...... 22, 59 Chen, Z ...... 26 Cook, L...... 35 Dasgupta, D...... 32 Cherepy, N...... 49, 67 Cooper, M...... 40 Das, L...... 51, 68 Cherns, D...... 38 Copley, J...... 39 Daspit, J...... 49 Cherukara, M...... 48, 57 Corbin, D...... 38 Das, S...... 15 Chesser, I...... 50, 66 Cordero, Z...... 23, 35, 70 Dausch, D...... 22, 33, 44, 52, 68 Chevalier, J ...... 25 Cormack, A...... 19 Davey, T...... 44 Chiba, A...... 35, 59 Cormier, D ...... 22, 46 David, M...... 55 Chien, S...... 17, 41, 65 Correa, C...... 35 Davies, D...... 58 Chinnathambi, K...... 38 Cortes, P ...... 45, 47 Davis, A...... 21 Chiu, W...... 44 Costa, G...... 44, 53, 61, 64 Davis, J...... 56 Chmielus, M...... 13, 14, 25, 47, 48, Costigan, T ...... 26 Dayal, K...... 43 52, 55, 69 Couet, A...... 17, 38 Dayal, P...... 59 Choa, F...... 31, 52, 56 Coughlin, D...... 28, 39 Deacon, R ...... 19 Chockalingam, R...... 38 Cox, B...... 64 DeBari, M ...... 52 Cho, E...... 43 Cox, M...... 18, 37 de Boer, M...... 26 Choi, A...... 37 Cramer, C ...... 45 De Boer, M ...... 54 Choi, H...... 40, 69 Crane, C...... 24, 35 DebRoy, T...... 36 Choi, S...... 16, 21, 29 Crane, N...... 69 DeCarlo, K...... 42, 45, 51, 59, 63 Chojnacka, J ...... 40 Crawford, S...... 24, 40 DeCost, B...... 52 Cho, K ...... 23, 34 Creuziger, A...... 18, 63 Degala, V...... 61 Chorpening, B...... 27 Crill, M...... 27 De Graef, M...... 32, 50, 51, 57, 58 Cho, S...... 24 Croom, B...... 13 Dehoff, R...... 15, 23, 37 Chou, Y...... 41 Crosby, K...... 21, 28 Deike, R...... 68 Chovatiya, A...... 54 Crowley, C...... 35 Del Guercio, G ...... 54 Chráska, T...... 35 Crystal, I ...... 18 Delia, D...... 35 Christensen, M...... 30 Cubuk, E ...... 16 De Luca, A...... 45, 62 Christensen, V ...... 28 Cui, B. . . . .12, 18, 24, 30, 40, 42, 51, 59, 63 Delzer, C ...... 49, 50 Christian, M...... 44, 49 Cui, L...... 55 De Marzi, A...... 69 Chromik, R...... 49, 58, 62, 65 Cui, Q...... 68 De Moor, E ...... 16, 55 Chuang, A...... 23, 34 Cullum, B...... 52 Deng, C...... 44 Chumlyakov, Y...... 22 Culp, J...... 24 Deng, L...... 42 Church, B...... 30 Curnan, M...... 66 Dennett, C...... 27 Cicoria, R...... 28 Curtarolo, S...... 16, 19 Dennison, J...... 40 Ciobanu, C...... 48 Curto, H...... 13 Deo, C ...... 55 Ciocca, L ...... 33 Cutler, S...... 52 de Oliveira, J...... 68 Cipollone, D...... 45 Depond, P...... 14 Clare, A ...... 62 D Derimow, N...... 37 Clark, C...... 56 Dacheux, N...... 50 Dervishi, E...... 56 Clarke, A...... 39 Dada, M...... 22 De Santiago Hernandez, H...... 50 Clarke, K...... 17, 28, 29, 39 Daehn, G...... 18 Detemple, E...... 48 Clough, E...... 13 Dahmen, K ...... 21 Detrois, M...... 31 Coble, J...... 15 Daigo, Y...... 59 Detwiler, K...... 16 73 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Devaraj, A...... 22, 42, 51, 66 Dupuy, A...... 50 Fallon, E...... 32 DeWitt, S...... 13, 34, 36 Duran, G...... 60 Fan, C...... 47 Dhakal, D...... 58 Dursun, S...... 39 Fang, S...... 53, 67 Dhamade, H...... 69 Durygin, A ...... 63 Fang, Z...... 22, 42, 51 Dhapola, S...... 54 Du, X ...... 69 Fan, L...... 31 Dharmadhikari, S...... 27 Du, Y ...... 19 Fan, X...... 31, 41 Dhulipalla, A...... 69 Dybich, J ...... 16 Farimani, A...... 26 Diaz, A...... 13 Farmer, W...... 50 Diaz Vallejo, N...... 23, 34 E Farwell, N ...... 14 Dickey, E...... 12, 19, 58 Eckert, J...... 14, 26, 37, 46, 54, 62 Fattebert, J...... 36 Dickinson, E...... 52 Edelman, A...... 42 Fazakas, E ...... 33 Diehl, B ...... 38, 46 Edirisinghe, M ...... 33 Fazeli, F...... 28 Diener, S...... 69 Edmondson, P...... 39, 49 Fazende, K...... 24, 35 Dierolf, V...... 33 Edwards, N...... 68 Feathers, M...... 47 Dietrich, S...... 14 Edwards, R...... 56 Fecht, H...... 65 Diewald, E...... 37 Eftink, B...... 38 Feigelson, B...... 17, 20, 24, 29, 49 Dillon, S...... 50, 58, 66 Egan, A...... 42 Feldhoff, A...... 61 Ding, J ...... 47 Egan, D ...... 14 Feng, J...... 53, 58 Dingreville, R ...... 55 Ehigiator, O...... 54 Feng, L...... 42 Ding, Z...... 57 Elahinia, M...... 46, 47, 55 Feng, S...... 23 Dippo, O ...... 46 Elam, J...... 67 Feng, Z...... 20, 24, 35 Dogan, O...... 19, 28 El-Awady, J ...... 32 Fenning, D...... 67 Dolaner, I...... 24 Elbakhshwan, M...... 38 Fensin, S...... 38 Donahue, E...... 15 Elhassid, D...... 13, 69 Fergus, J...... 17, 18, 29 Donegan, S ...... 43 Elias, A...... 15 Fernandez-Zelaia, P...... 53, 69 Dong, B ...... 63 El Kadiri, H...... 34 Fernandez-Zelai, P...... 26, 32, 53 Dong, Q...... 14, 32 Elliott, A...... 45 Ferraris, M...... 20, 45 Dong, W ...... 36 Ellis, B ...... 36 Ferraris, S...... 53 Dong, X...... 32, 45 Ellis, E ...... 36 Feser, J ...... 66 Dong, Y...... 19, 30, 51, 66 Ellis, M...... 65 Feuerstein, A...... 40, 65 Donmez, A ...... 15 Ell, J ...... 29 Feygelson, B...... 18 Dowling, D ...... 14 Ellyson, B...... 39 Fezzaa, K...... 49 Doyle, P...... 39, 47 Elseddawy, A...... 40 Field, K...... 27, 70 Draper, M ...... 38 Emge, I...... 31, 52, 56 Fifield, N ...... 48 Drazin, J...... 18 Emigh, M...... 22 Filippas, A...... 14 Dreher Pozo, P...... 27 Englert, L...... 14 Findley, K...... 18, 28, 38, 48, 55, 64 Drey, D...... 58 Enloe, C...... 16 Finfrock, C ...... 39 Driscoll, J...... 49, 58 Epting, W...... 32 Fink, C...... 47 Dryepondt, S...... 17, 26, 32, 53, 69 Ernst, A...... 54 Finnis, M...... 65 Duan, Y...... 27, 40, 45, 61 Escalante Castro, B...... 70 Fisher, C...... 38, 51 Dubas, E...... 18 Esmacher, O ...... 13 Fitz-Gerald, J...... 61 Dube, T ...... 69 Estevenon, P...... 50 Flint, M ...... 60 Dubey, S...... 67 Estrada, D...... 52 Flitcraft, E ...... 47 Dubinskiy, M...... 49, 57, 65 Etesami, S...... 54 Flores-Betancourt, A...... 45 Duff, M...... 39 Evans, A...... 44 Floro, J...... 40, 61, 63 Duffy, M...... 43, 44 Ewing, R...... 58 Fluss, M...... 47 Dugast, F...... 36 Foley, R...... 54 Du, J...... 19, 30, 41 F Fonda, R...... 37, 53, 56 Du, K...... 12 Fonstein, N ...... 22 Dumre, B...... 68 Fabregue, D...... 38 Forbes, D...... 51 Dunand, D...... 62 Fabrègue, D...... 25 Fordham, R...... 26 Dunstan, M...... 34 Fahrenholtz, W...... 42, 51, 59 Foster, C...... 57 Faierson, E...... 42, 45, 51, 59, 63 74 INDEX
Fotovvati, B...... 54, 62 Geng, X ...... 13, 59 Greenslit, M...... 39 Fox, J...... 23 Geng, Z ...... 46, 54 Gregg, D...... 59 Fox, K...... 33 Gentry, S ...... 30 Grensing, F...... 31 Franchin, G...... 69 Georgin, B...... 34 Greve, D...... 60 Franco, A...... 63 Geraldo Schön, C...... 17 Griffin,M...... 52 Frankel, G ...... 17, 65 Gershlak, J...... 44 Griffiths, S...... 45, 62 Fransen, N...... 68 Gess, J...... 64 Grob, C...... 59 Fraser, H...... 18, 34, 51 Gevaudan, J...... 59 Groeber, M ...... 15, 26, 37 Free, B ...... 40 Ghayoor, M...... 64 Groma, I...... 33 French, A...... 14 Ghazisaeidi, M ...... 18, 32 Grummon, D ...... 38 Frend, C...... 69 Ghimire, R...... 57 Grygiel, C...... 38 Fuchs, P...... 26 Gibson, M...... 52, 60, 64 Guan, C...... 28 Fuentes, A...... 58 Giddens, T...... 16 Guan, P ...... 43 Fuierer, P...... 58 Gigax, J...... 38 Gu, J...... 21 Fujimoto, K...... 52 Gilani, N ...... 45 Gulhane, A ...... 65, 69 Fujisawa, K ...... 15 Giles, S...... 29 Günster, J...... 12 Fukushima, M...... 12 Gill, P...... 31 Guo, H...... 44 Fullerton-Shirey, S...... 28 Giorjao, R ...... 20 Guo, R ...... 39, 48, 56, 65 Fuqua, P...... 57 Giri, A ...... 59 Guo, S...... 69 Furlan, K...... 57 Gleeson, B...... 31, 62 Guo, X ...... 44, 49, 50, 53, 58, 61, 63, 64 Fu, Y...... 37 Gliebe, K ...... 33 Gupta, R...... 56 Fu, Z...... 12, 25, 36, 45, 68 Glunt, K...... 15, 36 Gupta, S...... 12, 17, 23, 25, 29, 36, 45, Gnanasekaran, B...... 37 63, 68 G Gnaupel-Herold, T...... 18, 63 Gussev, M ...... 26 Gabor, U ...... 39 Gobert, C...... 37 Guss, G...... 14 Gabriel, A...... 47 Godfrey, A...... 15 Gu, Y ...... 32 Gadikota, G...... 35 Gökce, B...... 46 Guzas, E...... 60 Galante, A...... 57 Golumbfskie, W...... 40 Guzel, A...... 46, 54 Galetz, M...... 31 Goncharov, V ...... 61 Gwalani, B...... 22, 59 Gall, D...... 68 Gong, J...... 21 Gwynn, D ...... 36 Goodwin, F...... 39 Galyon Dorman, S...... 40 H Gammage, M...... 58 Gordon, J...... 61 Ganesh, P...... 19 Gordon, K...... 51 Haase, C...... 48 Ganguly, S...... 54 Gorelik, R...... 37 Haché, M...... 31 Gantz, F...... 51 Gorey, T...... 56 Hackett, G...... 32, 61 Gao, M...... 19, 31, 41, 50, 57, 59, 66 Gorsse, S ...... 22, 59 Hackett, M...... 55 Gao, P...... 35, 60 Gorti, S...... 13 Hagen, D...... 26 Gao, X ...... 35, 68 Gorzkowski, E...... 17, 18, 20, 25, 29, 40, Hager, K...... 33 Gao, Y...... 16, 21, 42, 51 49, 58, 62, 65, 66 Haghanifar, S...... 57 Garbiecz, D...... 40 Goski, D...... 12, 31 Haghshenas, M...... 21, 33, 43, 46, 67 Garcia, C...... 28, 64 Goswami, R...... 20, 32, 63 Hague, R ...... 45, 62 Garcia, E ...... 49 Gougar, B...... 52 Hahn, H...... 50 Garcia Villora, E...... 49 Gould, B...... 23, 34, 67 Halbig, M...... 20 Garich, H...... 56 Grande, A ...... 62 Haley, J...... 15, 37 Garland, A...... 15, 26 Grandjean, A...... 49 Halimi, I...... 36 Garza, R...... 66 Granzier-Nakajima, T...... 15 Halloran, J...... 29 Gaskey, B...... 62 Graux, A...... 38 Hall, T ...... 20, 25, 35, 40, 47, 56, 57, 62 Gates, G...... 57 Greeley, A ...... 46 Hallum, G...... 31 Gaudette, G...... 44 Greenberg, B...... 20 Halsey, W...... 15 Gaydaenko, A...... 62 Green, C...... 23 Hamilton, J ...... 46 Geng, L...... 63 Greene, G...... 52 Hamilton, R...... 47, 55 Geng, W...... 16 Greenough, M...... 44 Handwerker, C...... 50 75 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Hangen, U...... 22 Heuer, A...... 65 Hudson, E...... 15 Han, J...... 50 Heuser, B...... 27 Hughes, J...... 60 Hankwitz, J...... 36 He, Y...... 42, 54 Hughes, L...... 23 Han, L...... 21 Hey, T...... 35 Hung, C...... 34 Hanson, K...... 55 Hildreth, O ...... 15, 36 Hunsicker, B...... 31 Han, T ...... 48 Hile, Z ...... 27 Hurst, M...... 13 Häntsch, Y...... 57 Hilgar, L...... 56 Hurwitz, F...... 44 Hao, L...... 25 Hilla, C...... 62 Hu, S...... 61 Harimkar, S...... 56 Hilmas, A...... 29 Hu, X ...... 32 Harmer, M...... 23, 50, 59 Hilmas, G...... 42, 60 Hu, Y ...... 53, 67 Harris, W...... 21, 28 Hinnebusch, S...... 15, 36 Huynh, T...... 23, 46 Harris, Z...... 18, 30 Hintsala, E...... 22, 33 Hu, Z ...... 26 Harrysson, O...... 14, 26, 37, 46, 54 Hirai, N ...... 33, 34 Hyer, H...... 23, 34, 46 Ha, S...... 24, 30 Hirao, K...... 51 Hyers, R...... 13, 45, 49, 56 Hasannaeimi, V ...... 67 Hiszpanski, A...... 48 Hyuga, H...... 51 Haseen, S...... 29 Hoar, E...... 32 Hashizume, K...... 27 Hochhalter, J...... 15, 27, 37, 69 I Hashizume, Y...... 64 Hocker, S...... 51 Ibrahim, H...... 22, 47, 55 Hass, E...... 47 Hodges, E...... 13, 45, 49, 56 Ichikawa, K...... 55 Hastings, T ...... 34 Hoffie, A...... 58 Ide, M...... 14 Hatano, Y...... 27 Hoffmann, M ...... 23, 58 Ijiri, Y...... 69 Hattar, K...... 27, 38, 43, 47, 53, 55, 70 Hoffman, R...... 15 Ikesue, A ...... 49, 57, 65 Hattrick-Simpers, J...... 52 Hogan, D...... 18 Ilyas, A...... 68 Hausmann, B...... 19 Hogan, W ...... 65 Imam, S...... 46 Hawk, J...... 31, 57 Holcomb, G...... 19 Imholte, D...... 23, 46 Hayes, A...... 37 Holm, E...... 15, 21, 32, 33, 50, 52, 57, Inman, M...... 25, 35, 40, 47, 56, 57 Haynes, A ...... 41 66, 67 Inman, S...... 31 Haynes, D ...... 23 Homa, D ...... 27, 38 Inomata, D...... 49 Haynes, J...... 17, 32 Hong, W ...... 51 Irving, D ...... 19 Hayward, J...... 49 hooks, D...... 56 Irving, R...... 68 Headrick, W...... 45 Hooks, D...... 56 Isacco, S...... 48 He, B...... 52 Hopkins, A ...... 57 Isasti, N ...... 48 Hebert, R...... 34, 54 Hopkinson, D...... 24 Islam, M...... 46 Heiden, M...... 15, 26 Hornbuckle, B...... 59 Ispánovity, P...... 33 Heimann, J...... 57 Horn, T ...... 36, 37, 46 Ito, M...... 53 Heim, F ...... 16, 47, 55 Horonzy, M...... 56 Itskos, G...... 16, 27 He, J...... 38 Horwath, J...... 60 Ivas, T...... 62 Hejripour, F...... 26 Hosemann, P...... 46, 54, 62 Ivey, D ...... 28 He, L...... 26, 55 Hossain, M ...... 27 Hellmann, J...... 12 Hossain, Z...... 15, 16, 19, 28, 39, 48, 56 J Helmer, A ...... 36 House, S...... 31 He, M...... 37 Howard, J...... 60 Jablonski, P...... 31 Hemker, K...... 37 Hrabe, N ...... 37 Jackson, M...... 57 Hemmer, E...... 36 Hsieh, P...... 21 Jacobsohn, L...... 44, 49 Hemrick, J...... 31, 42, 45, 51, 59, 63 Hsu, T...... 32 Jagetia, A...... 22, 59 Henderson, H...... 24 Huang, A...... 34 Jain, E...... 62 Henein, H ...... 13, 28 Huang, K...... 24, 35, 44, 70 Jain, H ...... 33 Hennessy, A...... 57 Huang, L ...... 69 Jain, M...... 51 Hepler, K...... 47 Huang, Y...... 48 Janowski, G...... 17, 29 He, Q ...... 26, 61 Huang, Z...... 61 Jansto, S...... 16 Herold, P...... 65 HUANG, Z ...... 26 Jaques, B...... 52 Hershey, R...... 31 Huck, A...... 25, 54 Jarama, A...... 55 Jared, B...... 15, 26 76 INDEX
Jariwala, D...... 15 Kanematsu, H...... 33, 34 Kim, D...... 31, 43 Jayan, B ...... 21, 23, 32, 34 Kang, J...... 47 Kim, E ...... 69 Jayan, R ...... 30 Kannan, R...... 23, 34 Kimel, R...... 18, 30 Jayaraman, T...... 20, 32, 63 Kantzos, C...... 21 Kimes, K ...... 13, 48, 52, 69 Jean, F...... 13 Kaoumi, D...... 39, 49 Kim, G...... 18, 41, 59 Jensen, B ...... 58 Karaca, H...... 47, 55 Kim, H...... 21, 32 Jensen, S...... 26 Kara, L...... 14, 32 Kim, J...... 39, 55, 65, 69 Jewer, J...... 39 Karaman, I...... 22 Kim, K...... 40 Jhabvala, J ...... 62 Karra, A...... 46, 54 Kim, N...... 43 Jha, S...... 34, 43, 67 Karra, V...... 23 Kim, S...... 48 Jia, M ...... 51 Kasar, A...... 61 Kimura, M...... 55 Jia, N...... 59 Kasdorf, K...... 57 Kimura, T ...... 59 Jiang, C...... 26 Kassner, C...... 28 Kim, Y...... 12, 18 Jiang, R...... 23, 61, 67 Katoh, Y...... 12 King, D...... 61 Jiang, W...... 17 Kaufmann, K...... 19, 21, 51 King, G...... 51 Jiao, Z...... 31 Kaur, G...... 27, 60 Kingstedt, O ...... 27 Jia, T...... 27, 40 Kaur, M ...... 65 Kinsey, M...... 20 Jin, K...... 51, 59 Kautz, E...... 22 Kirchner, K ...... 29, 41 Jin, M...... 55 Kavitha, K...... 12 Kirihara, S...... 33 Jinschek, J ...... 23, 47 Kayang, K ...... 67 Kirim, B...... 14 Jin, Y...... 63 Kazakova, G ...... 22, 68 Kirka, M...... 26, 32, 36, 53 Johannes, M...... 60 Kedir, N...... 49 Kiselev, A...... 68 Johnson, D...... 22, 56 Keiser, J ...... 19 Kish, J...... 39 Johnson, J...... 44, 55 Keist, J ...... 46 Kitahara, A ...... 15, 33 Johnson, K...... 15, 26, 37, 44 Keller...... 49 Kjellqvist, L...... 31 Johnson, M...... 47 Kelley, M...... 53 Klecka, M...... 13, 60 Johnson, S...... 49, 58, 62, 65 Kelly, L...... 56 Klemm-Toole, J...... 39 Jo, I...... 39 Kemény, D...... 33 Klepov, V...... 49 Jones, G...... 23 Kemp, J...... 13 Klingenberg, M...... 23 Jones, K ...... 67 Kendrick, E...... 23 Kloenne, Z...... 18 Jones, N...... 26, 36, 37, 59, 60, 63 Kenel, C...... 62 Knapek, M...... 33 Jones, S...... 38 Kennedy, G...... 37, 58 Knapp, G...... 13 Joo, Y ...... 69 Keppens, V ...... 50 Knezevic, M...... 51 Jordan, B ...... 37 Kern, J ...... 55, 60 Knipling, K ...... 38, 56 Joshi, K...... 49 Kesavamatham, K...... 17, 29 Kobaissy, A ...... 39 July, A...... 64 Kesler, M...... 59, 70 Kobatake, T...... 35 Jung, Y...... 13, 25, 36, 40, 45, 65, 69 Keto, J...... 58, 62 Kobayashi, S ...... 25, 67 Junichi, T...... 12, 25, 36, 45, 68 Keyhani, A...... 58 Kobayashi, T...... 25 Jun, J...... 24, 35 Khafizov, M...... 27 Koca, A...... 14 Justus, S...... 65 Khairallah, S...... 14 Koch, B...... 18 Khakpour, I...... 63 Koch, D...... 20 K Khanbolouki, P...... 17, 57 Koch, R ...... 60 Kacher, J...... 32, 37, 42, 50, 62, 66 Khare, I ...... 68 Koerner, C...... 24 Kagawa, Y...... 49, 58, 62, 65 Khare, S...... 68 Kogo, T...... 33, 34 Kagay, B...... 63 Khatri, I...... 68 Kolel-Veetil, M...... 20, 32 Kailas, S...... 61 Khedmati, M...... 12 Konda Gokuldoss, P...... 14, 26, 37, 46, Kalidindi, S...... 13, 36 Khodabakhsh, S...... 14 54, 62 Kalvala, P...... 61 Khondkar, S...... 68 Kong, L...... 17, 59 Kamath, R...... 54 Kieffer, J...... 41 Koo, D ...... 40 Kam, W...... 69 Kikuchi, M...... 22 Kordijazi, A...... 56 Kane, J ...... 38 Kim, B ...... 18, 23, 34, 40, 65, 69 Korellis, H...... 55 Kane, K...... 49 Kim, C...... 22, 24 Korinchak, N...... 20 77 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Korinko, P...... 26 Lai, W...... 25 Lewis, D...... 28, 34 Koryttseva, A...... 59 Lalwani, S...... 22, 33, 44, 52, 68 Leyens, C...... 54 Koschan, M...... 68 Lama, B ...... 59 Ley, N...... 51 Kottman, M...... 69 Lamb, C...... 55 Liang, J...... 26 Koube, K ...... 37 Lambeets, S...... 22 Liang, K...... 29 Kouraytem, N...... 27 Lambert, P...... 38, 51, 59, 63 Liang, Q...... 42, 51 Koushik, J ...... 21 Lamon, J...... 16, 29 Liang, X...... 36, 37 Kovar, D...... 14, 26, 58, 62 Lamprinakos, N...... 14 Liao, H...... 14, 32 Koyanagi, T...... 47 Langer, S...... 63 Liao, Y ...... 18, 66 Kozeschnik, E...... 24, 68 Lang, M...... 58 Liaw, P ...... 19, 21, 31, 41, 50, 59, 66 Kozlík, J...... 35 Lara, B...... 20 Li, B ...... 31, 64 Kozlowski, G...... 60 Lara-Curzio, E...... 45 Libera, J...... 32 Kral, M...... 28, 51 Larsen, J...... 43 Li, D...... 18, 66 Krause, A. . . . .23, 33, 49, 50, 52, 59, 67, 70 Lass, E ...... 18, 22, 23, 34 Li, E...... 41 Krause, T...... 60 Lau, M ...... 61 Lienhard, J...... 21 Kremmer, T...... 17 Lauppe, D ...... 47 Liens, A...... 25 Krill, C...... 23 Lavelle, R...... 23 Li, G...... 30, 66 Krishnan, N...... 16, 29, 65 LaVerne, J ...... 40 Ligda, J...... 18 Krogstad, J...... 44, 67 Law, M...... 12 Liguori, E...... 20 Kroll, P...... 16, 29, 65 Lazor, R...... 28 Li, H...... 64 Kruglyak, I...... 25, 39, 47, 63 Lazovic, G...... 56, 65 Li, J...... 18, 47, 51, 68, 69 Kruizenga, A...... 55 Leach, S...... 15, 37 Li, K...... 34, 60 Kruk, R...... 50 Lear, C ...... 38 Li, L...... 12, 24, 35, 40, 44, 65, 70 K. Shargh, A ...... 18, 29 Leary, A ...... 60 Lilova, K...... 44, 53, 61, 64 Kuang, C ...... 16 LeBeau, J...... 33 Li, M...... 24, 31, 38, 66 Kubicki, J...... 21 LeBlanc, S ...... 55 Lim, G ...... 14 Kudou, A...... 67 Lee, C...... 41, 42, 55 Lim, M...... 24, 35 Kulabneva, E...... 61 Lee, D...... 17 Lim, R...... 23 Kulkarni, A...... 31, 41 Lee, G...... 24 Lim, Y...... 20, 24, 35 Kulkarni, K...... 25 Lee, H...... 35, 59 Li, N...... 38 Kulkarni, Y ...... 32, 66 Lee, J...... 12, 14, 15, 16, 28, 39, 40, 48, 56 Lin, C...... 61 Kumar, G...... 23, 43 Lee, K...... 49, 55, 58, 62, 65 Lin, H...... 18 Kumar, P ...... 61 Lee, M ...... 55 Link, G...... 23, 34 Kumar, S...... 54 Lee, S ...... 30, 39 Lin, Z...... 15 Ku, N ...... 16 Lee, Y...... 26, 32, 36, 53, 61 Liou, F ...... 52 Kuna, L...... 29, 49 Le, H...... 20, 25 Li, Q...... 51 Kuner, M...... 69 Lei, B...... 57 Lisiecka-Graca, P...... 43 Kunimine, T ...... 67 Lei, J...... 13, 59 List, F...... 53 Kurchin, R...... 42 Leinenbach, C...... 45, 46, 54, 62 List III, F ...... 15 Kusne, A...... 52 Leitherer, B ...... 55 Liu, D...... 27, 29, 38, 40, 47, 55, 56, 70 Kusner, R...... 31 Lei, Y ...... 15 Liu, H...... 16, 21, 23, 62 Kuttolamadom, M ...... 13 Leonard, D...... 23, 24, 34 Liu, K...... 28 Kuwabara, K...... 59 Leonard, H...... 24 Liu, L ...... 41, 58 Kuzmenko, I...... 35 Leonard, R...... 44 Liu, N...... 36, 40 Kwiecien, M...... 43 Leonhard, T...... 58 Liu, P ...... 21 Leriche, A ...... 12, 13, 25 Liu, S...... 60 L Leshchynsky, V...... 40 Liu, T...... 28, 57 LaCourse, M...... 52 Le, T...... 37 Liu, X...... 19, 31, 41, 44, 49, 50, 53, 59, Ladonis, A...... 35, 60 Letourneau, S ...... 67 61, 64, 66 Lad, R...... 39 Leu, P...... 57 LIU, X...... 26 Lai, J...... 68 Levine, L ...... 13 Liu, Y...... 16, 44, 48, 55, 68 Laitinen, V...... 48 Lew, D ...... 68 Liu, Z ...... 32, 41, 47, 60 78 INDEX
Li, W...... 50, 61 Ma, L ...... 13, 25, 36, 45, 61, 69 Ma, Y...... 31 Li, X ...... 16, 24, 30, 47, 48, 53, 55, 61, 67 Malik, R...... 18 Mayanovic, R...... 58 Li, Y ...... 20, 48, 69 Mallick, D...... 18 Mayer, J ...... 58 Li, Z ...... 25, 27, 57 Maloney, M...... 49 Mayfield, J...... 44 Ljungblad, U...... 37 Maloy, S...... 38 Mayi-Rivas, J...... 25 Lloyd, I...... 18, 30, 60 Mamontov, E...... 29 Mazali, T...... 12 Locke, J...... 18, 30, 33, 40 Manandhar, K...... 20 McBride, M...... 56 Logé, R...... 62 Mandal, K ...... 31, 56 McCabe, R...... 39, 42 Loli, J ...... 54 Mandrile, L...... 53 McCall, S...... 24 Long, M...... 61 Mandrus, D...... 50 McCarthy, M...... 42 Lookman, T...... 43 Manga, V...... 21 McCartney, G...... 54, 62 López, B...... 16 Mangeri, J ...... 29, 49 McCloy, J...... 50 Lopez-Cornejo, M...... 60 Mangus, D...... 47, 55 McCool, J...... 57 Lopez, E...... 54, 66 Manjooran, N...... 27, 38, 52, 60, 64 McCormack, C...... 16 Loveday, M ...... 68 Mannava, S ...... 22 Mccormack, S...... 28 Love, L...... 52, 60, 64 Mannodi Kanakkithodi, A. . . . . 32, 42, 67 McDermid, J...... 39 Loveland, D...... 48 Mann, S...... 14 McFarland, B...... 16 Lu, C...... 56 Manuel, M...... 60 McGarrahan, J...... 58 Lucas, C...... 23, 34 Mao, H...... 31 McGaughey, A...... 21, 30 Luckhardt, C...... 53 Mao, S...... 22, 42, 51, 67 McGehee, M...... 21 Lu, K...... 12, 17, 29, 40, 66 Mara, N...... 51 McGrath, J...... 18, 29 Luo, A...... 20, 32 Marchetti, C ...... 33 McGrath, P...... 33, 34 Luo, J ...... 19, 31, 41, 50, 59, 66 Marcum, W...... 55 McGuffin-Cawley, J...... 69 Luo, K...... 37, 60 Marian, J ...... 33 McGuire, M...... 30 Luo, Y...... 21 Marquez Rossy, A...... 53 McKenzie, R ...... 66 Lupercio, A...... 28 Marquis, E...... 66 McKeown, J...... 46, 54, 62 Lu, T...... 61 Marshall, A...... 36, 45 McMahon, M ...... 40 Luther, E...... 27, 40 Martin, A...... 14 McMurray, J ...... 44 Lu, X...... 49, 58 Martinez, Y...... 70 Mcwilliams, B...... 13, 25, 36, 45, 69 Lu, Y...... 13, 15, 42, 63 Martin, H...... 13, 20 McWilliams, B ...... 23, 34, 69 Lu, Z...... 65 Martin, J...... 52 Mecartney, M ...... 12, 25 Lyle, M...... 40 Martin, L...... 19 Mehta, A ...... 23, 41, 46 Lynch, T...... 44 Martin-Treceno, S...... 45 Mehta, V ...... 40 Lyons, J...... 31 Marvel, C...... 23, 50, 59 Melcher, C...... 68 Lyu, G...... 65, 69 Marya, M...... 47 Mena Garcia, J...... 39 Ma, S...... 41 Mena, J...... 38 M Maskrot, H...... 14 Mendoza, E...... 21, 23, 45 Maass, R...... 33 Mason, P...... 31, 34 Mendoza, G...... 55 Macchi, G ...... 62 Massey, M...... 14 Menezes, P...... 61 MacDonald, J ...... 34 Massoni, N...... 49 Mengis, L...... 31 Madej, L...... 43, 67 Mastorakos, I...... 42 Meng, K...... 69 Maeder, X ...... 62 Mathaudhu, S...... 43 Meng, L...... 69 Maev, R ...... 40 Mathe, N ...... 22 Menon, N...... 36 Magar, R...... 26 Mathis, B...... 15 Meredig, B...... 42 Mahajan, C ...... 22 Máthis, K...... 33 Merkey, E...... 65 Mahdi, T ...... 13 Mathur, S...... 12, 17, 29, 40, 66 Mesbah, A...... 50 Mahimkar, C...... 22, 28, 38, 48, 55, 64 Matiukhin, A...... 61 Messina, S...... 37 Mahmoud, M...... 23, 34 Matlack, K...... 27 Metz, P...... 35, 60 Mahmud, A...... 46 Matsunaga, K ...... 29 Michler, J...... 51 Mahtabi, M...... 47, 55 Matthews, M...... 14, 26, 46, 54, 62 Migdissov, A...... 53, 58 Majta, J...... 16, 43 Mauro, J...... 29 Migliori, A...... 61 Makki, M...... 42 Ma, X...... 61 Mignot, G ...... 47, 55 79 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Mikler, C...... 34 Mujib, S...... 65 Nematollahi, M...... 46, 47, 55 Milanek, M ...... 45 Mukherjee, S...... 21, 33, 43, 52, 67 Nene, S...... 22 Milisavljevic, I...... 36, 50 Mukherjee, T...... 36 Nettleship, I...... 14, 28 Militzer, M...... 42, 51, 66 Mukhopadhyay, N...... 32 Neuefeind, J...... 58 Miller, C...... 39, 53 Mukhopadhyay, S...... 52 Newkirk, J...... 15, 52 Miller, M...... 63 Muley, P...... 23 Newman, R...... 52 Miller, S...... 51 Müllner, P...... 48 Newsome, D...... 29, 58 Mills, L...... 22 Mummareddy, B...... 45 Newton, C...... 52 Mills, M...... 42, 51, 62 Mumm, D...... 49, 58, 62, 65 Nguyen, A...... 23 Min, G...... 55 Muniz Lerma, J...... 53 Nguyen, N...... 20 Ming Chen, M...... 49 Munshi, J...... 41 Nguyen, P ...... 48 Minor, A...... 55 Muralidharan, G...... 17 Nguyen, T...... 16 Mirzababaei, S...... 14 Muralidharan, K...... 15, 21, 26, 37 Ni, C...... 66 Mishchenko, V...... 61 Murphy-Leonard, A...... 37 Niebuhr, J...... 40 Mishra, A...... 68 Murray, S...... 22 Niendorf, T...... 22 Mishra, R...... 22 Murugan, S...... 39 Nijapai, P...... 65 Misra, M ...... 61 Mu, S ...... 13, 59 Nilsson, P...... 37 Misture, S...... 35, 49, 60 Musho, T...... 33, 56 Ning, K...... 39, 65 Mitchell, W...... 26 Musico, B...... 50 Nisar, A ...... 20, 67 Mitic, V...... 56, 65 Musinski, W...... 37 Niu, X...... 52 Mittig, W...... 38 Musterman, E...... 33 Niverty, S...... 40 Miura, H ...... 34 Muszka, K...... 16, 43, 67 Nizolek, T ...... 39 Miyamoto, K...... 67 Noh, H...... 43 Mizoguchi, M...... 55 N Noor E Sumaiya, S...... 18 Moczygemba, C ...... 70 Naguib, M...... 17, 29, 40, 66 Novich, K...... 52 Modugno, M...... 59 Naguib, M...... 29 Nygren, K...... 63 Mohammadijoo, M ...... 28 Najm, H...... 41 O Mohrbacher, H...... 16, 48 Nakajima, K...... 28 Mohr, M...... 65 Nakamura, A...... 23, 29 Obayemi, J...... 44 Mondal, S...... 36, 63 Nakamura, H...... 33 Oberdorfer, C...... 41, 66 Monnet, I...... 38 Nakamura, N...... 34 Obonyo, E...... 28 Monroe, R...... 55 Nakamura, T...... 53 Ochsendorf, M...... 32 Montaigne, D ...... 58 Nakhmanson, S...... 29, 49 Ogata, S...... 21 Montanaro, L...... 12 Nam, C...... 15, 28, 39, 48, 56 Ogawa, A...... 33, 34 Moore, D...... 26 Nanci, A...... 53 Ogura, N...... 53 Moore, E ...... 24, 54 Nandwana, P...... 18, 23, 34, 46, 53, 54 Ohji, T...... 12, 25, 35, 36, 45, 51, 68 Moorehead, M ...... 38 Nandwana, R...... 69 Ohodnicki, P...... 24, 40, 56, 60 Moorthi Sankar, K...... 55 Narayanan, B...... 48, 57, 69 Oh, S...... 23, 34 Moran, A...... 47, 56 Narayan, R...... 22, 33, 44, 52, 68 Ojha, A...... 25 Moreau, C ...... 49, 58, 62, 65 Narra, S ...... 15, 26, 37 Okada, R ...... 34 Moreno, R...... 25 Nascimento, M...... 45 Okello, A...... 62 Morgan, D...... 61 Nash, B...... 57 Oktem, A...... 24 Mori, M...... 35, 59 Naskar, A...... 20 Oleksak, R...... 19, 31, 41 Morris, J...... 19 Nassar, A ...... 14, 26, 38, 45, 46 Olevsky, E ...... 23, 24, 35, 70 Morrison, G...... 49 Nastasi, M...... 24, 42, 63 Olivetti, E...... 16, 32 Moser, A...... 20, 32 Nath, M...... 38 Olofinjana, A...... 55, 60 Moses, E...... 47 Navrotsky, A...... 21, 44, 53, 59, 61, 64 Olson, N...... 44 Mostafaei, A ...... 46, 61 Nawaz, K...... 45 Olszta, M...... 22 Moyer, L...... 60 Nayir, S...... 46 O’Masta, M...... 13 Moyers, A ...... 62 Ndayishimiye, A...... 28 Omura, T...... 55 Moylan, S...... 15 Neffati, D...... 32 Onler, R...... 14, 24 Mujahid, S...... 34 Nelson, K...... 25 Onuki, Y ...... 59 80 INDEX
Opila, E ...... 16, 31, 53 Pasebani, S...... 14, 64 Pimblott, S...... 40 O’Quinn, E...... 58 Pate, L...... 14 Pint, B...... 17, 19, 41, 49 Orikasa, K...... 52 Patel, A...... 52 Pinter, P...... 14 Oriti, T...... 47 Pathak, S ...... 51 Pinto, J...... 44 Ortiz, A ...... 61 Patterson, E...... 49, 58, 65 Piro, M...... 44 Osada, T...... 67 Paudel, H...... 45 Pistorius, P...... 25, 34 Osborne, C ...... 39 Paul, A...... 63 Pityana, S...... 22 Osetsky, Y ...... 19 Paul, B ...... 14, 64 Plante, R...... 52 Osti, N...... 29 Paul, S...... 13 Plotkowski, A...... 13 Ott, E...... 15, 27, 37, 69 Paulson, N...... 32, 42, 67 Plotnikov, Y...... 14, 61 Ouyang, L ...... 41 Paul, T ...... 20 Pogastscher, S...... 17 Ozdemir, E...... 24 Paunovic, V...... 56, 65 Policandriotes, T...... 24 Ozdoganlar, B...... 35 Pauza, J...... 23, 27, 42, 61 Poling, W...... 18 Öztürk, B...... 31 Payne, S...... 49, 67 Pollock, T...... 22, 37 Pazol, B...... 45 Pomerantseva, E...... 29, 30 P Paz y Puente, A...... 14, 23, 34, 35 Ponomarev, I...... 29 P., A...... 61 Pearmain, D ...... 23 Poon, J...... 19 Pabbi, L ...... 15 Pederson, R...... 46 Poon, S...... 31 Pace, K...... 49 Pei, Z...... 57 Poplawsky, J...... 41 Packard, C...... 33 Pellegrino, V...... 65 Popoola, P...... 22 Packo, M ...... 16 Pellemoine, F...... 38 Popov, D...... 63 Pacquentin, W ...... 14 Pelletier, J...... 31 Porz, L ...... 23 Padhy, G...... 69 Peltz, M ...... 15 Posey, J...... 43 Padilla, C...... 45 Peng, F...... 13, 59 Povoden-Karadeniz, E...... 24, 68 Padture, N...... 58 Peng, J ...... 17 Poweleit, D...... 55 Pagan, D...... 63 Peng, T...... 56 Prado, M ...... 66 Palad, R ...... 61 Peng, Y...... 20 Prakapenka, V...... 50 Pal, D...... 34 Pereda, B...... 16 Prasad, H...... 56 Palehova, I...... 62 Pereira da Cunha, M...... 39 Prenger, K...... 29 Palmero, P...... 12 Pereira, S...... 52 Prentice, L...... 52, 60, 64 Palmer, T...... 46 Perepezko, J...... 17, 41 Preuss, M...... 55 Panat, R...... 35, 70 Perez, M...... 38 Price, D ...... 59 Pandey, O...... 19 Perez-Torres, A...... 44, 67 Price, M...... 47, 55 Pandey, V...... 32 Perez-Willard, F...... 28 Priya, S...... 25 Pan, J ...... 32 Perron, A...... 24, 46, 54, 62 Pugar, J...... 33 Panov, N...... 36 Perry, M...... 43 Pyeon, J...... 65 Perzynski, K...... 43 Panzarella, C...... 44 Q Papadopoulos, K...... 54 Petit, F ...... 13 Paplham, T ...... 48 Petit, T...... 29 Qian, K...... 21 Paquit, V ...... 15, 37 Phan, T...... 15 Qian, M...... 34 Paramore, J ...... 34 Phero, T...... 52 Qiao, J...... 21 Parey, A ...... 18 Philips, N...... 34 Qi, H...... 21 Paridie, A...... 46 Phillips, N...... 22 Qi, J...... 61, 66 Parikh, S...... 52 Phillpot, S ...... 17 QI, J ...... 31 Park, H...... 40, 69 Pianassola, M ...... 68 Qi, L...... 64 Parkin, C...... 38 Piatti, E...... 53 Qin, F...... 39 Park, J...... 27 Picak, S...... 22 Qin, S...... 32 Park, S ...... 23, 46 Pickrell, G ...... 27, 38, 52, 60, 64 Qiu, A...... 66 Park, Y...... 39 Pietrzyk, M...... 67 Qi, W...... 32 Parrington, J...... 55 Pilchak, A ...... 43 Quincey, J ...... 55 Parrington, L...... 55 Pilgrim, S...... 39, 65 Quincy, J ...... 47 Parsons, E ...... 54 Pillai, R...... 17, 19, 41, 65 81 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
R Rhee, H ...... 34 Ronchi, M...... 19 Rheinheimer, N...... 68 Ronevich, J ...... 30 Rabelo de Lima, A...... 68 Rheinheimer, W. . . . . 23, 35, 50, 58, 66, 70 Roosendaal, T...... 61 Rackauckas, C...... 42 Ribar, S...... 56 Rose, D...... 15 Radhakrishnan, B...... 13, 20, 34, 36 Richter, J...... 22 Rosenzweig, Z...... 57 Radhakrishnan, R...... 35, 47, 62 Ricker, R...... 30 Roshan, H...... 56 Radovic, I...... 56, 65 Rickman, J...... 43 Rossi, A ...... 53 Raghavan, S...... 25 Rider, J...... 51 Rossin, J...... 37 Rahman, A...... 20 Ridley, M...... 31 Rowenhorst, D...... 37, 53 Rahman, D ...... 12 Riedel, C...... 50 Roy, A...... 36, 41 Rai, A...... 49 Riegner, D...... 41 Roy, I ...... 25 Raiman, S...... 39, 62 Riesenhuber, L ...... 45 Roy, M ...... 36 Raines, J...... 28, 38, 48, 55, 64 Rimsza, J ...... 21 Rozman, K...... 31, 57 Raj, R ...... 23, 34 Rincon Troconis, B...... 18 Rubenchik, A ...... 14 Ralls, A...... 61 Rios, O...... 24, 31 Rudzik, T...... 67 Ramachandramoorthy, R ...... 51 Ritchie, R...... 29 Rueschhoff, .L ...... 13 Raman, A...... 29, 58 Ritchie, S...... 70 Ruggles, T...... 26 Raman, S...... 46 Rivera, J...... 41 Rupert, T...... 42 Ramanujan, R...... 59 Rivero, I...... 22, 46 Russell, R...... 15, 27, 37, 69 Ramesh, S ...... 22 Rizvi, R...... 47, 55 Russell, S ...... 23 Ramgopal, T...... 18 Rizzardi, Q...... 33 Ryou, H ...... 17, 18, 20, 49, 65 Ramic, K ...... 58 Roache, D ...... 16, 47, 55 Ryu, G ...... 19 Ramirez, A...... 18, 20, 23, 34 Roach, M...... 56 Ramlatchan, A ...... 67 Robert, B...... 40 S Ramos, E...... 43 Roberts, M...... 60 Saban, O...... 24 Ramprasad, R...... 48 Robertson, D...... 15 Randall, C...... 28, 39 Sabolsky, E...... 23, 27, 33, 36, 38, 45, 56 Robinson, B...... 45 Sabolsky, K...... 27, 36, 38, 45 Randjelovic, B...... 56 Robinson, J ...... 23 Rao, D ...... 40 Sadayappan, K...... 20, 32 Robles, G...... 40 Sadeghilaridjani, M...... 52, 67 Raoux, S...... 29 Rock, C...... 36, 37, 46 Rasmussen, E ...... 69 Sadek, A...... 62 Rödel, J...... 23 Safronova, T ...... 22, 68 Rathi, A...... 63 Rodrigues, E...... 36 Rau, A...... 17 Safta, C...... 41 Rodriguez de Vecchis, P ...... 14 Sagar, S...... 40, 69 Raughley, M ...... 31 Rodriguez De Vecchis, P...... 13, 69 Ravi Narayan, L ...... 34 Sahasrabuddhe, H ...... 68 Rodriguez De Vecchis, R...... 48 Saidi, W...... 27, 31, 66 Rawn, C...... 50 Rodriguez-Ibabe, J...... 16 Rawn, P...... 37 Saito, T...... 29 Rodriguiz, P ...... 69 Saiz, D ...... 26 Ray, A...... 27 Roehling, J...... 62 Ray, P...... 25 Sajjadifar, S ...... 22 Roehling, T...... 62 Salam, M...... 26 Rearick, D...... 23 Roehm, H ...... 58 Rebak, R...... 19, 24, 31, 35, 41, 44 Salas, R...... 47 Rogers, R...... 44 Saleeby, K...... 15 Reddy, R...... 20 Rohatgi, A...... 20 Reece, M ...... 20 Saleem, A...... 60 Rohatgi, P ...... 56 Saleh, M...... 70 Reed, R...... 54 Rohrer, G...... 48, 58 Reeja-Jayan, B...... 21, 45 Saleh, T ...... 40 Rokkam, S...... 18, 30, 40 Salifu, A...... 44 Reh, S...... 29 Rolchigo, M...... 13 Reid, A...... 63 Salvador, H ...... 43 Rolland, G...... 14 Salvador, P...... 32, 48, 58 Ren, T...... 28 Rollett, A...... 14, 15, 21, 23, 25, 27, 32, Ren, Y...... 44, 63 Salvo, M...... 20, 45 34, 37, 42, 46, 54, 61, 62, 67 Sami, S...... 17 Restrepo, O...... 65 Romedenne, M...... 17, 41, 69 Reutzel, E...... 46 Samolyuk, G...... 19 Rome, G...... 68 Sampath, S...... 49 Reveron, H ...... 25 Rommel, S...... 24 Reynolds, D...... 27, 45 Sanchez Mata, O...... 53 82 INDEX
Sandhage, K...... 16, 27, 53 Sehirlioglu, A ...... 33, 52, 67 Shinagawa, K...... 59 Sandoval, J...... 15, 27, 37, 69 Sehitoglu, H...... 67 Shin, D...... 17 Sanghera, J...... 49, 57, 65 Seifi, M...... 15, 27, 37, 69 Shin, H...... 12 Sangid, M...... 16 Seita, M ...... 37, 46, 62 Shintani, S...... 53 Sankaranarayanan, S ...... 48, 57 Selezneva, I...... 22, 68 Shi, R ...... 14, 46, 54 San Marchi, C...... 63 Sengupta, A...... 28 Shiratori, H...... 59 SanSoucie, M...... 45, 49 Sengupta, D...... 29, 58 Shittu, J...... 52 Santala, L...... 14 Senn, W...... 65 Shivam, V ...... 32 Santala, M...... 50, 58, 66 Senor, D...... 40 Shivprasad, A ...... 27, 40 Santa Rosa Coradini, D...... 17, 68 Seo, D...... 64 Shi, Y ...... 57 Santillan, G...... 63 Seo, M ...... 38, 59 Shon, I...... 59 Santos, J...... 44 Serafeim, A...... 48 Short, M...... 27, 38, 47, 55, 70 Saragosa, J...... 28 Sereda, B ...... 25, 39, 43, 47, 60, 62, 63, Shrivastava, A...... 43 Saren, A...... 48 64, 68 Shulman, H...... 39, 65 Sargent, N ...... 34, 60 Sereda, D...... 25, 39, 43, 47, 60, 62, 63, Shyam, A...... 20, 32 Sarkar, A ...... 50 64, 68 Shyrokobokov, V ...... 61 Sarkar, S...... 19 Sereda, I...... 39 Sickafus, K...... 58 Sarmiento Klapper, H ...... 62 Sergi, A...... 34 Siddel, D ...... 45 Sassaman, D ...... 14 Sergueeva, A...... 28, 38, 48, 55, 64 Siderius, D...... 24, 35 Sato, H...... 25 Setera, B...... 31, 52 Sierros, K...... 27, 38, 45 Sato, M...... 23, 34 Sevener, K...... 29 Silling, S...... 29, 58 Sato, S...... 59 Seylar, J...... 66 Simmons, J...... 52 Savovici, A...... 63 Shadangi, Y...... 32 Simoes, L...... 64 Sayre, J...... 31 Shade, P...... 37 Simonelli, M...... 45, 54, 62 Sayres, S...... 64 Shahrezaei, S...... 43 Sims, Z...... 24 Scardelatto, S...... 45 Shah, V...... 42 Sinatra, R...... 40, 65 Scherer, J ...... 45 Shamsudeen, T...... 14 Sinfield, M...... 20, 51 Scherer, M...... 23 Shanbhag, G ...... 15 Singh, A...... 15, 21, 23, 32, 64 Schibler, J...... 60 Shang, S...... 32 Singhania, R ...... 60 Schlereth, C...... 31 Shang, Z...... 32, 47 Singh, G...... 17, 29, 40, 65, 66, 70 Schmidt, J ...... 69 Shao, L...... 38, 47 Singh, I...... 23 Schneider, G...... 57 Shao, M ...... 23, 47 Singh, J...... 61 Schneider, J...... 54 Shapiro, A ...... 18 Singh, K...... 65 Schoenholz, S...... 16 Sharifikoloui, E...... 45 Singh, M...... 12, 25, 35, 36, 42, 45, 68 Schoenung, J...... 50 Sharma, A...... 22, 23 Singh, N...... 31, 32, 52, 56 Schorne Pinto, J ...... 44 Sharma, G...... 19 Singh, P...... 22, 55 Schrock, D...... 40 Sharon, J...... 19 Singh, S ...... 31 Schroeder, A...... 54 Sharpe, C...... 15 Singh, V...... 47 Schuh, C...... 18, 21 Shatalova, T...... 22, 68 Singla, S...... 19 Schulman, D...... 15 Shayesteh Moghaddam, N...... 47, 55 Singui, G ...... 69 Schulze, P...... 55 Shehadeh, M...... 39 Sinnott, S...... 15 Schulze, W...... 39, 65 Shekhawat, D ...... 23, 56 Sions, J...... 14, 61 Schuster, R...... 24 Sheng, H ...... 48 Sirn, B...... 49 Schwalbach, E...... 37 Shen, H...... 34 Sisco, K...... 32 Schwinn, V ...... 48 Shen, Q...... 51 Sisson, R...... 26 Scime, L...... 15 Shen, Y...... 62 Sitko, M...... 67 Scofield, G...... 16 Sheyko, S...... 61 Sivakumar, N...... 46 Scott, M...... 45, 56 Shifler, D ...... 19, 31, 41 Škapin, S...... 56 Scully, J...... 31 Shih, M...... 32 Skelton, J ...... 61 Searight, W...... 55 Shi, J...... 17, 29, 40, 66 Skifton, R...... 52 Seeley, Z...... 67 Shimamura, K...... 49 Skinn, B...... 20, 56 Seepersad, C...... 15 Shimanek, J...... 32 Skinner, J...... 21
83 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Skinner, P...... 44 Srolovitz, D...... 50 Swain, M ...... 25 Slawecki, T...... 23 Srubar, W...... 59 Szabo, A...... 33 Smeltzer, J ...... 59 Stack, P...... 49 Szeliga, D...... 43, 67 Smith, D...... 12 Stadnick, B...... 22 Szymanski, N...... 68 Smith, E...... 56 Stajcic, A ...... 56, 65 Szymula, M...... 16 Smith, K...... 19 Stalheim, D...... 16 Smith, L...... 25, 54 Stand, L ...... 49 T Smith, R...... 30 Stan, M...... 21, 32 Tabasi, H...... 62 Snow, Z...... 46 Stan, T ...... 32, 42, 67 Tachi, R ...... 34 Snyder, D...... 23 Stauffer, D...... 22, 33 Taira, T...... 49, 57, 65 Snyder, K...... 14, 61 Steiner, J...... 51 Takadama, H...... 53 Snyder, S...... 20, 25, 35, 47, 56, 57, 62 Steiner, M...... 18, 23, 34, 40, 42, 51, 66 Talaat, A...... 56, 60 Soares, D...... 70 Steingrimsson, B...... 31, 41 Tambasco de Oliveira, P...... 53 Soboyejo, W ...... 44 Stenta, A...... 44 Taminger, K...... 51 Sobrero, C...... 22 Sternlicht, H ...... 58 Tamura, N...... 57 Soffa, W...... 63 Stevens, E...... 52 Tandia, A...... 16 Sofinowski, K ...... 46 Stewart, C ...... 56 Tan, G...... 48 Sohn, I...... 59 Stiner-Jones, L...... 18 Tang, F...... 47, 64 Sohn, Y...... 23, 34, 41, 46 Stocks, M...... 19 Tang, L...... 29 Solomon, C...... 48 Storck, S...... 44 Tang, M ...... 43, 50, 58, 66 Somarauthu, V...... 32 Stoudt, M...... 30, 46 Tan, X...... 56 Somers, A...... 55 Strantza, M ...... 14 Tan, Z...... 17 Song, D...... 65, 69 Stráský, J...... 35 Tarr, J ...... 15 Song, G...... 41 Strayer, S ...... 27 Tarsitano, A...... 33 Song, H ...... 62 Strumban, E...... 40 Tasan, C...... 19 Song, J ...... 22, 49, 58, 62, 65 Strzelecki, A...... 50 Tatami, J...... 18 Song, W...... 48 Stull, J...... 56 Tatarko, P...... 20 Song, X...... 13, 26, 69 Stump, B...... 13 Taylor, C...... 17, 65 Song, Y...... 13, 34 Stutzman, C...... 14, 26 Taylor, J ...... 25, 35, 47, 56, 57 Soni, V...... 22, 59 Subramanian, R ...... 38 Tayon, W...... 27 Sooby Wood, E...... 40, 70 Su, C...... 31, 52, 56 Tehrani, M...... 17, 57 Sorondo, S...... 46 Suematsu, H ...... 12, 25, 36, 45, 68 Telmer, M...... 23 Sotelo Martin, L...... 50 Suganuma, K...... 35 Tempke, R...... 56 Soylemez, E...... 14 Sugar, J...... 55 Temple, A...... 54 Spear, A ...... 27 Su, J...... 56 Tench, M...... 56 Speer, J...... 55 Sukhomlyn, V...... 60, 63 Terrones, M...... 15 Spencer, M...... 28, 60 Su, L...... 32, 34 Tessmer, J...... 32 Sperling, P...... 26 Sulentic, C...... 52 Thadhani, .N ...... 37, 58 Sprayberry, M...... 15, 36 Sumpter, B...... 48 Thakur, A...... 21 Spreitzer, M...... 39 Sun, C...... 27, 38, 47, 55, 58, 70 Thapaliya, B...... 29 Spriano, S...... 53 Sundar, A...... 64 Thoma, D...... 37, 38 Spurling, R...... 69 Sundaram, S ...... 13, 19, 26, 30, 31, 41 Thomas, B...... 45 Squillante, M...... 49, 57, 65 Sundar, V...... 54 Thomas, L ...... 56 Sreeramagiri, P...... 36 Sun, H ...... 24, 44 Thomas, M...... 27 Sridar, S...... 13, 46, 48, 60 Sun, L...... 40 Thompson, .S ...... 28 Sridharan, H...... 66 Sun, S...... 35 Thoreson, M...... 61 Sridharan, K ...... 38 Sun, T...... 61 Thotakura, G...... 63 Sridharan, N...... 18, 70 Su, R...... 32 Thrun, .M ...... 39 Sridhar, N ...... 44 Suter, R...... 23, 62 Thuault, A...... 13 Srinivasan, J...... 18, 33 Sutton, B ...... 18, 27 Tiamiyu, A...... 21 Srinivasan, R...... 34 Suvorov, D...... 39, 48, 56, 65 Tian, X...... 56 Srivas, P...... 53 Su, Y...... 42 Tian, Y...... 61 84 INDEX
Tidrow, S...... 39, 56, 65 Unnikrishnan, R...... 55 W Tikhonova, S...... 68 Unocic, K...... 19, 31, 41, 53 Tiley, J...... 43, 67 Upadhyay, P...... 28, 39 Wachs, D...... 23, 46 To, A...... 13, 15, 27, 36, 37 Uranga, P...... 16, 48 Wada, N...... 33, 34 Toader, O...... 27 Uthpala Subasinghe, L...... 12 Wadghule, S...... 69 Tobón, J...... 65 Uzonwanne, V...... 44 Wagner, K ...... 58 Toda, K...... 49 Walden, M...... 28, 48 Tolman, K...... 56 V Wallat, J...... 59 Wall, M...... 57 Toman, J...... 25, 47, 48 Vadiraja, S...... 37, 54 Tome, C ...... 42 Walton, S...... 55 Vail, C...... 43 Wang, A...... 38 Tomozawa, M...... 19 Valenza, F ...... 20 Tondare, V...... 15 Wang, B ...... 24 Van Benthem, K...... 23 Wang, D...... 40, 51, 57 Tongay, S...... 64 Vander Wal, R...... 23, 42, 52 Tong, J ...... 13, 44, 59 Wangenheim, C ...... 62 Van Pelt, R...... 26 Wang, F ...... 24, 42, 63 Tong, Y...... 21 Van Rooyen, I...... 15, 26, 37 Tonks, M...... 17 Wang, G...... 16, 21, 41, 62, 64 van ‘t Erve, O...... 60 Wang, H...... 21, 47 Topac, E...... 24 Varadharajan Idhaiam, K ...... 38, 56 Torresani, E...... 24 Wang, J...... 16 Varadharajan Id, K...... 27, 45 Wang, L ...... 27 Toshev, O...... 68 Varga, J...... 27 Tossey, B...... 17 Wang, M ...... 33, 44, 68 Varlet, J...... 14 Wang, P ...... 14, 26, 30 Trad, T...... 64 Vasudevan, V ...... 22, 23, 34 Tran, H...... 37 Wang, S ...... 24 Vecchio, K...... 19, 21, 46, 51 Wang, T...... 48 Tran, M ...... 69 Vecoven, A...... 12 Tran, V...... 43 Wang, W ...... 52, 55 Velazquez Plaza, A...... 49 Wang, X...... 16, 20, 32, 46, 48, 53, 60, 67 Trautt, Z...... 52 Velisavaljevic, N...... 51 Travitzky, N...... 13, 26, 69 Wang, Y. . .16, 17, 42, 47, 49, 50, 51, 57, 63 Velisavljevic, N...... 63 Wang, Z ...... 14, 19, 26, 37, 46, 48, 54, 62 Tredway, W...... 13 Velumani, S...... 13 Trellue, H...... 40 Ward, C ...... 63 Vemulapalli, S...... 50 Ward, J...... 51 Trice, R...... 49, 58, 62, 65 Venkaiah, N...... 61 Tripathi, A...... 12 Ward, L...... 41 Verma, A...... 25, 46, 54 Warren, C ...... 35 Trivelpiece, C...... 39, 49, 57 Verma, M...... 56 Tse, Y ...... 62 Warren, J...... 64 Vetter, E...... 63 Was, G...... 27 Tsuji, K...... 39 Veverkova, A...... 35 Tuck, C...... 54 Washburn, N...... 33 Viatela, Y...... 66, 70 Waters, C...... 43 Tucker, J...... 43, 47, 55 Vijapur, S...... 25 Tucker, M...... 58 Watson, M...... 45 Vijayan, S...... 23, 47 Watson, T...... 24 Tufariello, J ...... 45 Viswanathan, B...... 17 Tumkur Umanath, T...... 62 Watts, J...... 42 Viswanathan, V...... 42, 43 Watza, M...... 16 Turgut, Z...... 60 Vivek, A...... 18 Turner, G...... 34 Waxman, R...... 29, 58 Vlahovic, B ...... 56 Weaver, J ...... 15, 57 Turner, J...... 13, 34, 36 Vlasea, M...... 15 Tymiak-Carlson, N...... 30 Weaver, N ...... 45 Vogli, E...... 47, 64 Webler, B...... 26, 54 U Voisin, T...... 47 Webster, R...... 53 Volkenandt, T...... 28 Webster, T...... 22 Ubic, R...... 39, 48, 56, 65 Volkov, A...... 67 Wegener, T...... 22 Uddin, S...... 26 Volokh, V...... 60, 63 Weiland, B...... 54 Ueshima, M...... 35 Voo, N ...... 60 Wei, N ...... 61 Uggowitzer, P ...... 17 Voorhees, P...... 67 Wei, S...... 19 Ugi, D...... 33 Vorontsov, M...... 14 Weisen, A...... 66 Ulissi, Z...... 54 Vozar, R...... 27 Weiss, D...... 24 Ullakko, K...... 48 Vrancken, B...... 62 Weiss, E...... 41 Ullberg, R...... 17 Wei, T...... 59 85 Technical Meeting and Exhibition MS&T20 VIRTUAL NOVEMBER 2-6, 2020
Welch, R...... 55 Wu, X...... 17, 34 Yeoh, Y...... 62 Welk, B...... 34 Wu, Y...... 12, 13, 19, 25, 26, 31, 36, 41, Yeratapally, S...... 27 Wells, D...... 15, 27, 37, 69 45, 49, 50, 51, 57, 59, 65, 66, 68, 69 Yi, H...... 16 Wen, X...... 49 Wu, Z...... 46 Yilmaz, E...... 24 Wermer, J...... 40 Yingling, J...... 44 West, G...... 23 X Yin, J...... 26 Wharry, J...... 17, 27, 29, 38, 47, 55, 70 Xiang, F...... 24 Yin, T...... 35 Wheat, E ...... 15 Xiao, H...... 13, 59 Yin, Y...... 44 Whipkey, S...... 59 Xie, X...... 21 Ynciarte, V...... 18 White, B...... 15, 19, 26 Xing, F...... 41 Yokoi, T ...... 29 White, C...... 57 Xing, W...... 42 Yo o, J ...... 15 White, J ...... 40 Xin, H...... 52 Yoon, D ...... 49 White, M...... 61 Xinqi, L ...... 69 Yoshizawa, Y...... 12 Whiting, J ...... 15 Xiong, F...... 28 Young, A ...... 51 Whittington, W ...... 34 Xiong, H ...... 19, 30, 44, 66 Young, G ...... 47, 55 Wident, P...... 14 Xiong, W...... 13, 16, 25, 34, 46, 48, 60 Young, M...... 16, 51, 57 Widgeon Paisner, S...... 27 Xiong, X...... 16 Yue, S...... 49, 58, 62, 65 Wiesner, V...... 49, 51, 58, 62, 65, 68 Xiu, P...... 27, 70 Yu, H...... 36, 43, 45, 52, 53, 60, 61, 64 Wiezorek, J ...... 56 Xue, S...... 47 Yumak, T...... 38 Wildfire, C...... 23, 33, 36, 56 Xue, Y...... 59 Yun, M...... 53 Wildheim, M...... 37 Xu, H ...... 30, 49, 50, 53, 58, 61, 66 Yu, T...... 17 Wilhide, J...... 52 Xu, J ...... 35, 47 Yu, Y...... 21, 40 Wilkin, M ...... 62 Xu, K...... 28 Z Willard, M...... 63, 69 Xu, S...... 42, 66 Williams, B ...... 16 Xu, W...... 44 Zaeem, M...... 42, 51, 66 Williams, M...... 30 Zaengle, J...... 13 Wilson-Heid, A...... 25, 54 Y Zahiri, A ...... 50 Wimmer, E ...... 30 Yahata, B ...... 13 Zaitsev, V...... 22, 68 Wimpory, R...... 48 Zakutayev, A...... 52 Windes, W...... 38 Yakaboylu, G...... 27, 36, 38 Yamada, T...... 25 Zampieri, G...... 70 Windl, W...... 17, 18, 30, 41, 65, 66 Zarandi, F ...... 15, 27, 37, 69 Winfrey, L...... 38, 55 Yamaguchi, S...... 53 Yamamoto, N ...... 61 Zebarjadi, M...... 40 Wischhusen, M...... 31 Zega, T...... 21 Wiskel, J...... 28 Yamanaka, K...... 35, 59 Yan, D...... 34 Zeng, Q ...... 50 Wisner, B...... 42 Zhang, C ...... 20, 35, 38, 41, 42, 66 Witt, A...... 23 Yang, D...... 16 Yang, F ...... 44, 67 Zhang, D...... 33, 61 Witte, R ...... 50 Zhang, F...... 15, 30 Wodo, O...... 36, 52 Yang, H...... 21, 51 Yang, J ...... 17, 31 Zhang, G...... 50, 51 Wohl, C ...... 51, 68 Zhang, H...... 17, 29, 35, 38, 40, 55, 66 Wojcik, T...... 24 Yang, K...... 16, 32 Yang, N...... 12, 17 Zhang, J...... 13, 25, 36, 40, 45, 65, 69 Wolak, M...... 24 Zhang, L...... 41, 49, 57, 65 Wolfe, T...... 13 Yang, P...... 53 Yang, S ...... 64, 65, 69 Zhang, M...... 48 Wollmershauser, J. . . . 17, 18, 20, 24, 29, 49 Zhang, S...... 21, 30 Wong-Ng, W...... 24, 35, 44, 70 Yang, T...... 61 Yanguas-Gil, A...... 67 Zhang, T...... 15, 51 Wong, T...... 52 Zhang, W...... 14, 31, 32, 62 Wooldridge, M...... 62 Yang, W ...... 24, 49, 50 Yang, X...... 40, 69 Zhang, X . . . . 12, 18, 24, 30, 32, 44, 47, 49, Woolstenhulme, N...... 23, 46 53, 57, 63, 65, 66 Wrobel, R...... 62 Yang, Y...... 53, 55 Yang, Z...... 46, 54 Zhang, Y ...... 21, 32, 59, 62 Wu, D...... 24, 30, 44, 61, 66 Zhang, Z...... 26, 59 Wu, K...... 34, 64 Yan, H...... 19 Yan, X...... 42, 63 Zhan, X ...... 27 Wu, L ...... 59 Zhao, K...... 17, 29, 40, 66 Wu, M ...... 32 Yao, L...... 21 Yarasi, S...... 15, 21 Zhao, Y...... 13, 34 86 INDEX
Zhao, Z...... 44 Zheng, C ...... 14 Zheng, J...... 12 Zheng, S...... 67 Zheng, W...... 15 Zheng, Y ...... 18, 42, 46, 51, 54, 66 Zhong, W...... 27 Zhong, Y ...... 19, 31, 41, 50, 59, 66 Zhou, C ...... 32, 42, 50, 58, 62, 66 Zhou, D...... 51 Zhou, F...... 21, 43 Zhou, H...... 19, 30, 44, 49, 58, 66 Zhou, L...... 23, 46 Zhou, M...... 58 Zhou, Q...... 24, 35 Zhou, S...... 16 Zhou, W...... 55 Zhou, Y ...... 16, 51 Zhu, C ...... 21, 50, 51 Zhuravleva, M...... 68 Zhu, T...... 32 Ziabari, A...... 15 Zimmerman, S...... 34 Zinkle, S...... 39, 47 Ziomek-Moroz, M...... 24 Ziurys, L...... 21 Zondlo, J ...... 36 Zou, Y. . . . 31, 33, 36, 42, 45, 47, 53, 60, 61 Zuback, J...... 46 Zupan, M...... 43, 44 zur Loye, H...... 49 Zurutuza, I...... 48 Zweiacker, K...... 62
87