Ba-350Te/350Ste
Total Page:16
File Type:pdf, Size:1020Kb
1 ” ” BA-350TE/350STE /2 -2 BRONZE BALL VALVE MSS SP-110 THREE-PIECE, FULL-PORT 600 WOG / 150 SWP EXTENDED TUBE ENDS INLINE REPAIRABLE* MATERIALS LIST AVAILABLE 15 6” FEMALE 6” MALE 14 ITEM PART MODEL MATERIALS ASTM SPEC. END END 1 Body 350 & 350S Bronze B584 2 End Cap 350 & 350S Bronze B584 B’ 350 Brass B16 3Stem 350S 316 Stainless Steel B276 4 Packing Nut 350 & 350S Brass B16 5 Packing 350 & 350S PTFE RPTFE 6 Thrust Washer 350 & 350S (25% Glass Reinforced) 13 12 350 CP Brass B16 9 7Ball OPEN 350S 316 Stainless Steel B276 11 MILWAUKEE VALVE BA-350 L RPTFE 8 Seat 350 & 350S (15% Glass Reinforced) 9 Handle 350 & 350S Steel w/ Zinc Plating B633 R 10 Handle Nut 350 & 350S Steel w/ Zinc Plating B633 11 Handle Grip 350 & 350S Vinyl 12 Body Bolt 350 & 350S Steel (Gr 8) w/ Zinc Plating B633 13 Body Nut 350 & 350S Steel (Gr 8) w/ Zinc Plating B633 14 Stub End, 6"M 350 & 350S Copper Tube, Type "K" 15 Stub End, 6"F 350 & 350S Copper Tube, Type "L" 10 3 Pressure temperature charts contain valve seat 5 4 7 and body ratings for standard valves. Solder 8 6 end valves are de-rated by the limitations of the 2 2 H joint as specified in ASME 16.18. Brazing installations can be likewise derated. Consult ASME 16.18 and the American Welding Society for the actual joint ratings of the material being used for the specific application. Pressure and Temperature ratings may be further derated in accordance with the pressure rating associated with the type of copper tube 1 A used for the stub end. Call the factory for B W accurate application data. DIMENSIONS 25.4 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" UNITS DN15 DN20 DN25 DN32 DN40 DN50 INCHES 0.5 0.75 1 1.25 1.5 2 A (DIA) mm 13 19 25 32 38 51 INCHES 13.86 13.92 14.03 14.79 15.05 15.4 B mm 352 354 356 376 382 391 INCHES 0.51 0.76 0.92 0.98 1.1 1.35 B' mm 13 19 23 25 28 34 INCHES 1.95 2.26 2.44 2.8 3.12 3.58 H mm 50 57 62 71 79 91 INCHES 3.88 4.75 4.75 6.5 7.38 7.38 L mm 99 121 121 165 187 187 INCHES 1.91 2.19 2.46 2.98 2.98 4 W mm 49 56 62 76 76 102 * Designed for soft solder or brazed installation Cv 17 31 60 110 185 360 without disassembly. NOTE: DN (Diameter Nominal)=Metric equivalent size. The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change design, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com . MILWAUKEE VALVE BA350ste_rev2.CDR BA-350 VALVE MILWAUKEE.