DOCSLIB.ORG

AUSTRALIAN OFFICIAL JOURNAL of TRADE MARKS 29 January 2009

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
AUSTRALIAN OFFICIAL JOURNAL of TRADE MARKS 29 January 2009 Vol: 23 , No. 4 29 January 2009 AUSTRALIAN OFFICIAL JOURNAL OF TRADE MARKS Did you know a searchable version of this journal is now available online? It's FREE and EASY to SEARCH. Find it at http://pericles.ipaustralia.gov.au/ols/epublish/content/olsEpublications.jsp or using the "Online Journals" link on the IP Australia home page. The Australian Official Journal of Designs is part of the Official Journal issued by the Commissioner of Patents for the purposes of the Patents Act 1990, the Trade Marks Act 1995 and Designs Act 2003. This Page Left Intentionally Blank (ISSN 0819-1808) AUSTRALIAN OFFICIAL JOURNAL OF TRADE MARKS 29 January 2009 Contents General Information & Notices IR means "International Registration" Amendments and Changes Application/IRs Amended and Changes ...................... 1867 Registrations/Protected IRs Amended and Changed ................ 1867 Registrations Linked ............................... 1864 Applications for Extension of Time ...................... 1866 Applications for Amendment .......................... 1866 Applications/IRs Accepted for Registration/Protection .......... 1596 Applications/IRs Filed Nos 1279903 to 1280555 ............................. 1587 Applications/IRs Lapsed, Withdrawn and Refused Lapsed ...................................... 1868 Withdrawn..................................... 1869 Refused ...................................... 1869 Assignments,TransmittalsandTransfers.................. 1869 Cancellations of Entries in Register ...................... 1871 Notices........................................ 1866 Opposition Proceedings ............................. 1864 Removal/Cessation of Protection for Non-use Proceedings ....... 1872 Renewal of Registration/IR ............................ 1871 Trade Marks Registered/Protected ....................... 1865 Trade Marks Removed from the Register/IRs Expired ........... 1873 Transformation and Replacement ....................... 1871 This Page Left Intentionally Blank For Information on the following please see our website: www.ipaustralia.gov.au or contact our Customer Service Network on 1300651010 Editorial enquiries Contact information Freedom of Information ACT Professional Standards Board Sales Requests for Information under Section 194 (c) Country Codes Trade Mark and Designs Hearing Sessions INID (Internationally agreed Numbers for the Indentification of Data) ‘INID’ NUMBERS in use on Australian Trade Mark Documents ‘INID’ is an acronym for Internationally agreed Numbers for the Identification of Data’ (200) Data Concerning the Application. (210) Serial Number of the application. (220) Data of filing the application. (300) Data relating to Priority under the Paris convention. (500) Various Information. (510) List of goods and/or services. (511) Nice Classification of goods and/or services. (540) Reproduction of the mark. (551) Indication of the effect that the mark is a collective mark or a certification mark. (554) Shape mark. (556) Sound mark. (557) Scent mark. (591) Colour mark. (700) Information Concerning Parties Concerned with the Application/Registration. (730) Name and address of the applicant or owner of the registration. (750) Address for service for correspondence. NOTE: Trade marks marked with an asterisk (*) or an IR number are international applications designating Australia AUSTRALIAN OFFICIAL JOURNAL OF TRADE MARKS 29 January 2009 ABSTRACTS OF DECISIONS ABSTRACT OF REASONS FOR A DECISION OF A DELEGATE OF THE REGISTRAR OF TRADE MARKS Trade Mark Application : 1138173 : CF CITY FINANCE LOANS & CASH SOLUTIONS Applicant : Lou Pozzebon Opponent : Citigroup Inc Decision : Section 52 opposition: sections 43, 44 and 60 not established, registration proceeding. Costs awarded against opponent Decision Issued : 19 January 2009 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ Trade Mark Application : 1026197 : HERMAN'S HERMITS Applicant : Jan Barry Whitwam Opponent : Frimp Limited Decision : Section 52 opposition – ss42, 43, 58 & 62(b) grounds not established – breach of UK law and s42(b) - costs awarded against opponent Decision Issued : 19 January 2009 ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ Trade Mark Application : 1114102 SINGLE SHOT Applicant : Ian Sumner Opponent : Schott Aktiengesellschaft Decision : Section 52 opposition; s 42, s 60 grounds not established. Registration proceeding. Costs awarded against opponent. Decision issued : 19 January 2009 This Page Left Intentionally Blank AUSTRALIAN OFFICIAL JOURNAL OF TRADE MARKS 29 January 2009 Proceedings Under The Trade Marks Act 1995 Applications/IRs Filed Nos 1279903 to 1280555 Representations of the trade marks comprised in the following list of applications/international registrations designating Australia may be inspected at the Trade Marks Office , Canberra and in the Trade Marks Sub-Offices at Sydney, Melbourne, Brisbane, Adelaide, Perth and Hobart. The date following the class is that on which the application was filed; in the case of convention applications the country of origin and the date claimed are in parentheses. 1 A Smart Start, Inc. a Texas corporation (US, 20 1280458 Aristocrat Technologies Australia Pty Ltd 1280256 Nov 2008) Cl. 9. ACN/ARBN 001 660 715 (US, 10 Jul 2008) Cl. 9, 41. 1IQ Pty. Ltd ACN/ARBN 134 743 614 Cl. 35. 1279278 Aristocrat Technologies Australia Pty Ltd 1280257 24-7 Bright Star Healthcare, LLC (US, 12 Sep 2008) 1280147 ACN/ARBN 001 660 715 (US, 10 Jul 2008) Cl. 9, 41. Cl. 39, 43, 44, 45. (IR 988322) Arla Foods amba (DK, 16 May 2008) Cl. 1, 5, 29, 30, 1280096 3 Oceans Wine Company Cl. 33. 1280520 31, 32. (IR 988090) 3D Networks (Australia) Pty Ltd Cl. 9, 42. 1280065 Aunties & Uncles Co-operative Family Project Ltd 1280405 Cl. 41, 45. 3D Networks (Australia) Pty Ltd Cl. 9, 42. 1280066 AusCom Cl. 9. 1279982 3M Company A corporation of the State of 1280216 Delaware Cl. 9. AUSTCOM INTERNATIONAL PTY LTD ACN/ARBN 1279938 060 279 076 Cl. 36. 3M ESPE AG Cl. 9, 16, 41, 44. 1280344 AUSTCOM INTERNATIONAL PTY LTD ACN/ARBN 1279939 A-Data Technology Co., Ltd. Cl. 9. 1280282 060 279 076 Cl. 36. A. P. Eagers Limited ACN/ARBN 009 680 013 Cl. 1280202 Australia Ausa International Pty Ltd ACN/ARBN 1280261 35. 131 416 209 Cl. 24. A. P. Eagers Limited ACN/ARBN 009 680 013 Cl. 1280203 Australian Mortgage Securities Pty Ltd Cl. 36. 1280403 35. AUSTRALIAN OPAL CUTTERS PTY LTD 1280219 Ab Initio Software LLC a Delaware corporation Cl. 1280459 ACN/ARBN 092 602 027 Cl. 14. 9. Australian Stevia Mills Pty Ltd ACN/ARBN 110 331 1280287 ABORIGINAL HOUSING COMPANY LTD 1280204 416 Cl. 30. ACN/ARBN 001 154 481 Cl. 45. Australian Wine Research Institute Limited, The 1280252 Absolute Translations Pty Limited Cl. 35, 41. 1280365 Cl. 41, 42, 44. Accumetrics, Inc. Cl. 5, 10. (IR 988457) 1280169 AXEL KAISER (IT, 20 Jun 2008) Cl. 18, 24, 25. (IR 1280173 Achim Ostertag Cl. 16, 25, 35, 38, 41. (IR 988109) 1280101 988490) Activision Publishing, Inc. a corporation 1280457 B.S.A. (FR, 29 Feb 2008) Cl. 35. (IR 988411) 1280160 organised and existing under the laws of the state B.S.A. (FR, 29 Feb 2008) Cl. 29, 35. (IR 988412) 1280161 of California (US, 11 Jul 2008) Cl. 9. Ballard Consultants Pty Ltd as Trustee for the 1280050 AGC, LLC a Delaware corporation Cl. 28. 1280064 Shelling Family Trustee ACN/ARBN 065 991 719 Ager Sectus Wine Estates Limited Cl. 33. 1280551 Cl. 20. Agostino, Benardino and Faraj, Charlie Cl. 37. 1280296 Bank of Western Australia Ltd ACN/ARBN 050 494 1280540 Alsco Inc. Cl. 35, 37, 41, 43, 45. (IR 988066) 1280093 454 Cl. 36. Aluminium Specialties Group Pty Ltd Cl. 6. 1280391 Bank of Western Australia Ltd ACN/ARBN 050 494 1280546 Aluminium Specialties Group Pty Ltd Cl. 6. 1280394 454 Cl. 36. American Outdoor Products, Inc. Cl. 30. (IR 1280187 Barbetti, Laurina and Lanefort Pty Ltd ACN/ARBN 1280073 988162) 090 882 241 Cl. 9, 41. Anderson-Law, Jodie and Law, Bryan Cl. 3, 44. 1279302 Barden, Paul see Turner, Kelvin Ansul, Incorporated incorporated in the State of 1279943 BARORE CORPORATION PTY LTD ACN/ARBN 1280464 Delaware Cl. 9. 069 869 076 Cl. 30, 43. AOL LLC a Delaware limited liability company 1279942 Bayerische Motoren Werke Aktiengesellschaft Cl. 1280250 (US, 11 Nov 2008) Cl. 41. 41. AP Vessel Management Pty Ltd ACN/ARBN 086 1280523 BECKERMAN, DANIEL ANDREW Cl. 9. (IR 988073) 1280184 439 198 Cl. 12, 39. Beckman Coulter, Inc. Incorporated in Delaware 1280194 Apollo Group, Inc. Cl. 41. 1279955 Cl. 1, 5, 9, 10. Apollo Group, Inc. Cl. 41. 1279957 Beckman Coulter, Inc. Incorporated in Delaware 1280195 (US, 2 Jan 2009) Cl. 37, 42. Apollo Group, Inc. Cl. 41. 1279958 BEIERSDORF HOLDING FRANCE SARL (FR, 12 1280098 Apple Inc. (TT, 13 May 2008) Cl. 9. (IR 988319) 1280146 Mar 2008) Cl. 3. (IR 988097) Appliance Testing Supplies Pty Ltd ACN/ARBN 1280223 Bennett, Belinda Kate see Bennett, Jon 118 910 517 Cl. 40. Bennett, Belinda Kate see Bennett, Jon Appliance Testing Supplies Pty Ltd ACN/ARBN 1280224 118 910 517 Cl. 35. Bennett, Belinda Kate see Bennett, Jon ARENGO 309 (PTY) LIMITED (US, 13 Jul 2008) Cl. 1280374 Bennett, Belinda Kate see Bennett, Jon 7. Bennett, Jon and Bennett, Belinda Kate Cl. 35. 1280530 Bennett, Jon and Bennett, Belinda Kate Cl. 35. 1280539 - 1587 - AUSTRALIAN OFFICIAL JOURNAL OF TRADE MARKS 29 January 2009 Bennett, Jon and Bennett, Belinda Kate Cl. 35. 1280538 C & E Projects Pty. Ltd. ACN/ARBN 116 060 612 1279818 Bennett, Jon and Bennett, Belinda Kate Cl. 35. 1280532 Cl. 33. Berimballi, Joseph Cl. 9. 1280068 Cadbury UK Limited Cl. 30. 1280529 Beryl, LLC A New York limited liability company 1280051 CALIBRA MEDICAL, INC. (US, 5 Jun 2008) Cl. 10, 1280167 (US, 2 Dec 2008) Cl. 25. 16. (IR 988453) Beyonce Knowles (US, 9 Oct 2008) Cl. 3, 9, 16, 25, 1280381 Callaway Golf Company incorporated in the State 1280455 41. of Delaware (US, 16 Dec 2008) Cl. 28. Bid Buy Sold Auctions Cl. 35. 1280245 CALOR (FR, 24 Jun 2008) Cl. 9, 11. (IR 988215) 1280126 Bid Buy Sold Auctions Cl. 35. 1280247 CAMPER, S.L. (ES, 21 Jul 2008) Cl. 25. (IR 988336) 1280188 BigBoy Media Pty Ltd ACN/ARBN 120 721 128 Cl. 1279905 CARBON BALANCE SOLUTIONS PTY LTD 1280206 16. ACN/ARBN 132 233 633 Cl. 42. BIOCORP RECHERCHE ET DEVELOPPEMENT Cl. 1280171 Cardplai Pty Ltd ACN/ARBN 134 723 998 Cl.
Load more

Recommended publications
  • Evaluation of Waste Gypsum Wallboard As a Composting Additive
    Evaluation of Waste Gypsum Wallboard as a Composting Additive Prepared for the Resource Recovery Fund Board March 2013 Investigators: Dr. G. W. Price Innovative Waste Management Research Program Department of Engineering, Faculty of Agriculture, Dalhousie University Truro, NS Christopher Richards, M.Sc. candidate Faculty of Agriculture, Dalhousie University Truro, NS Acknowledgements We would like to acknowledge the financial support for this project through the RRFB, as well as in-kind contributions and advice from Halifax C&D (Mr. D. Chaissie). We also acknowledge technical and editorial contributions from staff at Nova Scotia Environment (B. Kenney, D. MacQueen), Resource Recovery Fund Board (E. Christensen, B. Gillis) and the Colchester County Waste Management Division. Field and analytical support from technical staff at Facutly of Agriculture, Dalhousie University (M. Tate, C. Roberts) and numerous undergraduate research assistants are also gratefully acknowledged. We would like to thank Drs. P. Arnold (Acadia University) and R. Donald (NSAC/Dalhousie University) for technical support and advice throughout the project. Page | 2 Executive Summary A series of studies were conducted to evaluate the possibility of diverting Waste Gypsum Wallboard (WGW) from C&D and municipal landfills in Nova Scotia. Previous studies have shown the potential to use wallboard gypsum as an agricultural amendment but the materials used were primarily from clean sources. The feasibility of using WGW as a feedstock in compost systems was examined through three different studies over two years at the Faculty of Agriculture, Dalhousie University. An initial investigation to characterize and determine the potential compostability of WGW was conducted using a pilot scale in-vessel composting unit at the Bio-Environmental Engineering Centre, Bible Hill, NS.
    [Show full text]
  • Executive Summary
    GtoG Project From production to recycling: a circular economy for the European gypsum Industry with the demolition and recycling Industry LIFE PROGRAMME LIFE11 ENV/BE/001039 DA1-Inventory of Current Practices EXECUTIVE SUMMARY SEPTEMBER 2013 DA1 EXECUTIVE SUMMARY GtoG Project Introduction Gypsum – an exceptional construction The problem material In the 8 EU target countries (Belgium, France, Gypsum is a rock-like mineral used in Germany, Greece, Poland, Spain, the construction in different applications such as Netherlands and the UK), it is estimated that plasterboard, building plaster and gypsum blocks, around 1,150,000 tonnes of plasterboard waste among others. were generated in 2012. In most of the European countries where it is produced a low recycling rate The GtoG project focuses on lightweight of this gypsum waste is observed. gypsum components also known as plasterboard products that mainly consist of The aim of the GtoG project is to obtain up to gypsum whose surface and longitudinal edges 30% of reincorporation of the recycled gypsum, are covered with paper and used for partitions from both production and Construction and and the lining of walls, ceilings, roofs and floors. Demolition (C&D) waste, into the plasterboard Other generic terms used for this product are: manufacturing process. gypsum board, drywall and wallboard. Main types of gypsum In Europe the first plasterboard plant was built in Until mid-1980s most of the gypsum used in the Liverpool in 1917. European Union was natural gypsum extracted from quarries. Since then, FGD gypsum (a by- product from the Electricity Industry) became an important supply for the Gypsum Industry.
    [Show full text]
  • Waste Management
    WASTE MANGEMENT 1. Materials Management Overview How society uses materials fundamentally affects our economic and environmental future. Inefficient and wasteful use of materials now challenges the capacity of the Earth – air, water and land. We can fulfill our needs and prosper while using less material, reducing toxics, and recovering more of the material we consume. By acting less wastefully and considering system- wide impacts in the design, marketing, reuse, recycling, and disposal of products, life-cycle materials assessment represents an important change in how we think about waste and chemicals management. Actions are being taken by EPA to: (1) manage materials and products on a life-cycle basis; (2) build the nation’s capacity to manage materials, and (3) accelerate the public dialogue necessary to create a green, resilient, competitive, and sustainable economy in the future. The President’s Executive Order 13514 , Federal Leadership in Environmental, Energy, and Economic Performance, emphasizes the importance of sustainability and requires U.S. Federal agencies to meet a number of energy, water, and waste reduction targets, including 50% recycling and waste diversion by 2015. 1.a EPA Materials Management Responsibilities EPA’s Strategic Plan http://www.epa.gov/finance/plan/plan.htm identifies priority approaches to protect the land, including reducing waste at its source, recycling waste for materials or energy values, managing waste effectively by preventing spills and releases of toxic materials, and cleaning up contaminated properties. EPA’s waste management office, the Office of Resource Conservation and Recovery, http://www.epa.gov/epawaste/index.htm is primarily responsible for overseeing implementation of certain provisions of the nation’s Resource Conservation and Recovery Act (RCRA).
    [Show full text]
  • Moving Forwards
    Recycling Today Magazine ~> Moving Forward Page 1 of 3 recvdin MoVing Forward By: Timothy G. Townsend May 2003 URL: http:llwww.recyclingtoday,com/arficles/article.asp?lD=4759&CafiD=&SubCatlD= Gypsum drywall is a major component of modern buildings, yet it is often one of the least likely components of debris frem building construction, demolition or renovation to be recycled. Gypsum drywall typically makes up 5 percent to 25 percent of the weight of debris from building-related C&D activities, A typical rule of thumb for drywall generation from construction activities is one pound of drywall per cubic foot of construction. The amount of post-consumer drywall generated in Florida C&D debris in 2000 was estimated at nearly 500,000 tons. Most of this was disposed in unlined landfills. Recovery and recycling is always desired in place of lend- filling when feasible, but several environmentel factors (odor, groundwater contamination) create added incentive for recycling d~JwalL While several gypsum drywall recycling operations exist in North America at the current time, in many areas (Florida for example) drywa!l recycling is relatively nonexistent. This paper describe~ some of the issues facing the C&D debris industry and summarizes the current state of gypsum drywall recycling in North America. DRYWALL BASICS Gypsum drywall, often referred to as gypsum wallbeard or sheet rock, replaced gypsum piaster as the major interior wall surface because of its ease of installation and its fire resistant properties. Gypsum drywal! consists of approximately 90 percent gypsum and 10 percent paper facing and backing. Gypsum is a mineral composed of calcium sulfate (CaSOL and water (H20).
    [Show full text]
  • Opportunities for Promoting the Recycling of Gypsum Board from Construction, Renovation, and Demolition in Manitoba
    Opportunities for Promoting the Recycling of Gypsum Board from Construction, Renovation, and Demolition in Manitoba by Hyunjoo Oh A Thesis submitted to the Faculty of Graduate Studies of The University of Manitoba in partial fulfillment of the requirements of the degree of Master of Natural Resources Management Natural Resources Institute Clayton H. Riddell Faculty of Environment, Earth, and Resources University of Manitoba Winnipeg, Manitoba Copyright © 2019 by Hyunjoo Oh ABSTRACT This thesis is the result of a two-year (2016-2018) study through literature and document review and semi-structured interviews; many people in Manitoba from industry and government participated in the interviews, and many others in other Canadian provinces shared their knowledge and experience in the construction, gypsum manufacturing, and recycling industries. The research aimed to explore opportunities for promoting the recycling of gypsum board in Manitoba, given that gypsum is largely landfilled despite its high recyclability. Overall, this study concludes that the establishment of recycling infrastructure and minimized distance of transport are key factors in gypsum recycling. Considering these factors of importance and regional recycling conditions and circumstances, the study highlights the fact that government initiative and support through financial (dis)incentives and regulations are at the core of promoting the recycling of gypsum board in Manitoba. KEYWORDS: gypsum board, recycling policy, waste management, construction waste, CRD waste, gypsum to gypsum, drywall disposal. i ACKNOWLEDGEMENTS Many people assisted and supported me in completing this thesis. First, I would like to thank my committee: Dr. Iain Davidson-Hunt, my academic advisor, for your inspiration, confidence in me, warm encouragement, and constant support and guidance; Dr.
    [Show full text]
  • Gypsum Wallboard Recycling and Reuse Opportunities in the State Of
    Gypsum Wallboard Recycling and Reuse Opportunities in the State of Vermont Emma Marvin Waste Management Division Vermont Agency of Natural Resources August 4, 2000 Table of Contents Executive summary ...............................................1 Introduction ....................................................2 Opportunities Reuse Donation .............................................4 Resale ................................................6 Recycling Gypsum Drywall Manufacturing ..........................7 Soil Amendment Compost Bulking Agent/ Additive ........................12 Direct Land Application Agricultural Land Application ......................16 Recreational Land Application ......................22 On Site Land Application ..........................24 Athletic Field Marker .............................26 Other (Low Priority Opportunities For Vermont) Animal/ Livestock Bedding ..............................28 Cement Production ....................................28 Facilitate Sodium Leaching .............................28 Flea Powder .........................................29 Grease/ Spill Absorbent ................................29 Mine Reclamation .....................................29 Mushroom Growing ...................................29 Odor Reduction .......................................29 Water Treatment .....................................29 Processing .....................................................30 Resources Literature ................................................31 Web Sites .................................................35
    [Show full text]
  • Recycling of Waste Gypsum Boards to Produce New Drywalls and Non-Load Bearing Bricks
    THE AMERICAN UNIVERSITY IN CAIRO SCHOOL OF SCIENCES AND ENGINEERING RECYCLING OF WASTE GYPSUM BOARDS TO PRODUCE NEW DRYWALLS AND NON-LOAD BEARING BRICKS BY NADA KHALED FATHY RAGAB B.Sc. NATURAL GAS AND PETROCHEMICALS A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Environmental Engineering Under the supervision of: Dr. Salah El Haggar Professor and Chair, Mechanical Engineering Department July 2014 ACKNOWLEDGEMENTS This study would never have come to fruition without the support and encouragement of many people both on and off campus. My deepest thanks go to my advisor, Dr. Salah El Haggar, who offered me unfailing guidance and assistance throughout all phases of my research. Your endless patience will always be remembered with gratitude. I would also like to extend heartfelt thanks to Eng. Mahrous and Dr. Abdel Moteleb from Osma- boards. Eng. Mahrous supported me not only by providing needed materials, but also by believing in the importance of my Thesis. Dr. Abdel Moteleb provided valuable help with the Data Analysis. Thank you both for your support. Thanks also go to Eng. Zakareya Yehia from the Materials Testing Lab for allowing me to use his lab to conduct flexural strength testing. I am also grateful to Mr. Mohamed Saeed and Mr. Kassem at the Technology & Innovation Lab for assisting me with the lab work throughout all stages of the Thesis. I owe a debt of gratitude to my parents, family members, and friends for supporting me throughout this journey with their patience, love, and understanding. I could not have done this with you.
    [Show full text]
  • Application of Recycled Gypsum Wallboards in Cement Mortar
    CSCE Annual Conference Growing with youth – Croître avec les jeunes Laval (Greater Montreal) June 12 - 15, 2019 APPLICATION OF RECYCLED GYPSUM WALLBOARDS IN CEMENT MORTAR Hansen, Sarah1 and Sadeghian, Pedram1,2 1 Dalhousie University, Canada 2 [email protected] Abstract: Gypsum is a naturally formed mineral that is already known to be added to cement at small percentages in order to reduce the speed of reaction with water, however it seems that substantial technical research has not been done concerning larger proportions of gypsum. The primary objective of this study is to use recycled wallboard/drywall powder (hereafter is called gypsum) as a partial replacement for cement in cement mortar mixtures to introduce a more sustainable and environmentally friendly solution that lowers carbon dioxide (CO2) emissions by using recycled materials, while maintaining adequate strength and durability. Used gypsum wallboard is often sent to landfills instead of being recycled, which can cause leachates with harmful environmental and health effects. Eight mixtures containing different combinations of cementitious material including cement, gypsum and fly ash were mixed with water and aggregates and placed in 50 mm mortar cube molds. After curing in a moist room, the mortar cubes were tested for compressive strength at the age of 3, 7, 28, and 56 days. Superplasticizers were used to regulate mixture consistency, as adding gypsum was found to dehydrate the mixture. Fly ash was also used, though requiring a longer initial setting time than cement. This study showed that mixtures containing only recycled gypsum and cement showed lower compressive strength at all ages, becoming increasingly weak with increased proportions of gypsum.
    [Show full text]
  • Waste Management Plan - a Case Study of a Medium Sized Building Contractor in Ireland
    Implementing a site waste management plan - A case study of a medium sized building contractor in Ireland. _______________________ Jan Göttsche Supervisor: Dr. Mark Kelly A Dissertation Submitted in Partial Fulfilment of the Masters in Environmental Systems. Galway – Mayo Institute of Technology. 2011/2012 Plagiarism Declaration – September 2012 I, Jan Gӧttsche, declare that this thesis is an original work carried out by the author with due reference and acknowledgements given where necessary towards the work of others. No part of this thesis has previously been accepted for any degree and is not concurrently submitted for any other award. I declare that the work contained in this thesis is my original work unless otherwise stated. All information including tables and diagrams which is copied from or based on the work of others has its source clearly acknowledged in the text and its reference clearly outlined at the end of the document. Signature: ____________________________ Date: _____________ i This thesis has been printed on 100% recyclable paper. The paper is FSC certified, carries the EU Ecolabel as well as having ISO 9001 and ISO 14001 certification. ii Abstract Construction and demolition waste management is becoming increasingly important on construction sites as landfill space in Ireland is rapidly depleting and waste management costs are rising. Due to these factors waste management plans are seen as a good response to minimising waste on site and this thesis aims to investigate how to implement such a plan on a practical case study as well as investigating the legislation regarding construction and demolition waste along with market availability for the reuse of the waste.
    [Show full text]
  • Technical Specifications for Green Public Procurement
    Technical Specifications for Green Public Procurement Wall Panels Background Report Eurogypsum comments Report for the European Commission – DG Environment by AEA, Harwell, September 2008 Owner, Editor: European Commission, DG Environment-G2, B- 1049, Brussels. Disclaimer: The European Commission accepts no responsibility or liability whatsoever with regard to the information presented in this document. Technical Specifications for Green Public Procurement – Wall Panels Background Report Table of contents 1 Introduction 1 2 Abbreviations and Definitions 2 3 Definition, Scope and Background 3 3.1 Technologies 4 3.2 The Wall Panel Market 6 4 Key Environmental Impacts 8 4.1 Materials and Manufacture 8 4.2 Use Phase 14 4.3 Waste: Installation and End of Life 15 4.4 Summary 23 5 Cost Considerations 25 6 Relevant European Legislation and Policy 27 6.1 Construction Products Directive (CPD) 89/106/EEC 27 6.2 The Energy Performance of Buildings Directive (EPBD) 2002/91/EC 29 6.3 REACH Regulation EC 1907/2006 30 6.4 The Classification, Packaging and Labelling of Dangerous Substances Directive 67/548/EEC 30 6.5 Management of Waste from Extractive Industries (MWEI) 2006/21/EC 30 6.6 Waste Framework Directive, 2006/12/EC 30 6.7 European Landfill Directive 1999/31/EC 31 6.8 Packaging and Packaging Waste Directive 94/62/EC 31 6.9 Future Legislation 31 7 Existing Ecolabels and Standards for Wall Panels 32 7.1 Ecolabels 32 7.2 Examples of Best Practice 35 8 Conclusion & Summary 39 9 Proposal for Core and Comprehensive Criteria 40 10 Information Sources
    [Show full text]
  • Eurogypsum Waste Policy: Building Value for Society
    Eurogypsum Waste Policy: Building Value For Society Table of content Foreword . 5 Executive Summary . 7 EU Legislation and Policy Drivers . 9 Enhancing Value for Finished Products via a Sustainable Use of Resources. 15 Industry Best Practices. 33 Conclusions . 37 ANNEX I: Gypsum Products Markets . 39 ANNEX II: References . 41 3 4 Foreword Waste is an important area for the European Commision. Over the past thirty years, the European Union has laid down a number of laws that protect human health and the environment from waste, the transport of waste and major waste facilities such as landfi lls or incinerators. In my time as Commissioner, I have brought forward new policies to move the EU towards a recycling society, one in which waste should be prevented, reused or recycled wherever possible. If we are to achieve these ambitious objectives all stakeholders need to play their part. European industry can make a signifi cant diff erence, both in improving the way it handle or prevent its own waste, and in improving the technology that can be used to manage waste from its sources. This publication demonstrates that EuroGypsum is working towards both these aims, and I welcome this. StavrosStavros DimasDimas MEMBER OF THE EUROPEAN COMMISSION 5 6 Executive Summary Gypsum plasterboard is used to line interior walls to achieve a clean smooth fi nish. The environmental loads from the production, use and disposal of Gypsum plasterboard can be minimised by the recycling of Gypsum. This raw material is indeed fully and eternally recyclable. In that respect, much has already been written and spoken about the Gypsum Industry in connection with waste generated from the construction process.
    [Show full text]
  • Gypsum Drywall Recycling in the North East
    4/2/2019 Gypsum Drywall Recycling In the North East Construction & Demolition Materials Source Construction & Demolition Recycling Association (CDRA) 583 Million tons generated 430 million tons recycled Diversion success story Local markets Natural resource savings Reducing carbon foot print Job creation $23.4 Billion economic benefits 1 4/2/2019 Mixed Construction & Demolition Materials After subtracting aggregates - source CDRA 63.4 Million Tons Mixed C&D recycled annually C&D process fines 21.5 million tons (Recycling? Diversion? or?) Process fines contain 5-10% sulfate (1-2 m tons) Gypsum is 17% Sulfate 5.8-11.8 million tons gypsum contained in fines Source CDRA U.S. Generates 13.5 Million Tons of Drywall Scraps NEWMOA States 2.8 million? 2 4/2/2019 Current Disposal Options Truck to landfill Process fines (ADC?) Process residuals Rail to landfill Gypsum & Disposal Challenges 8 years landfill capacity in NE Gypsum generates H2S (odors) H2S Suppresses methane generation H2S contaminates methane Sulfide contaminates leachate Waste to energy ash + So2 emissions 3 4/2/2019 H2S Issues - Business as usual? 12+ North East landfills currently fighting H2S odor problems Class action lawsuits SC Supreme Court rules nuisance odor is trespassing - tangible invasion $2m award 2013 Exporting the Problem? “It is likely that significant quantities of gypsum will be recycled only if gypsum is not allowed in landfills due to H2S issues” MA 2007 C&D Debris study “All of the NEWMOA states have experienced public health and/or nuisance problems with hydrogen sulfide gas at landfills that use C&D residuals” NEWMOA 2010 Hazardous waste definition 40 CFR § 261.23 “..When mixed with water, it generates toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment” 4 4/2/2019 Five Steps Outlined by NEWMOA 2010 Fines 1.
    [Show full text]