DOCSLIB.ORG

Hydrite General Product Flyer

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hydrite General Product Flyer PRODUCT OFFERING forms, trade names and a variety of certifi cations. Please call us about your specifi c chemical requirements. PRODUCTS A-Z Acetic Acid Calcium Chloride Calcium Dioctyl Phthalate Glycol Ether DPM Reduction Chemicals Acetone Hydroxide (Lime) Calcium Dipotassium Phosphate Glycol Ether EB Liquid Inorganic Salts Aluminum Brite Dips Hypochlorite Calcium (DKP) Glycol Ether EE Magnesium Bisulfi te Aluminum Chlorhydrate Phosphates Dipropylene Glycol Glycol Ether EE-AC Magnesium Chloride Aluminum Sulfate (Alum) Carboxymethyl Cellulose Disodium Phosphate Glycol Ether EM Magnesium Hydroxide Ammonium Bicarbonate Caustic Potash Dodecylbenzenesulfonic Glycol Ether EP Magnesium Oxide Ammonium Bifl uor ide Caustic Soda Acid (DDBSA) Glycol Ether PM Magnesium Phosphate Ammonium Bisulfi te Chelants Dye Fixatives Glycol Ether PM-AC Magnesium Sulfate Ammonium Chloride Chlorine Epoxy Resins HAN, Heavy Aromatic Magnesium Sulfi te Ammonium Hydroxide Chromic Acid Ethyl Acetate Naphtha Metal Finishing Products (Aqua Ammonia) Citric Acid Ethyl Alcohol Heat Transfer Fluids Methanol Ammonium Persulfate Copper Carbonate Ethylene Diamine Tetra Heptane Methyl Amyl Ketone Ammonium Phosphates Copper Cyanide Acetic Acid (EDTA) Hexane Methyl Ethyl Ketone Ammonium Sulfate Copper Sulfate Ethylene Dichloride Hexylene Glycol Methyl Isobutyl Ketone Ammonium Sulfi te Cyclohexane Ethylene Glycol HTH Methylene Chloride Mineral Anhydrous Ammonia Cyclohexanone Felt & Wire Cleaners Hydrochloric Acid Fillers Anodizing Chemicals Dairy Cleaners Ferric Chloride Hydrofluoric Acid Mineral Seal Oil Antifoams & Sanitizers Ferric Sulfate Hydroflu osilicic Acid Mineral Spirits Antifreezes Debonders Filter Powders Hydrogen Peroxide Mold Release Agents Aromatic Solvents Decolor Fire Retardants Hydroxyacetic Acid Mono-Isopropyl Amine Ascorbic Acid Defoamers Floor Cleaners (Glycolic Acid) Monoammonium Barium Carbonate Deinking Compounds Floor Dry IBIB Phosphate Monopotassium Battery Acid Diacetone Alcohol Fluoboric Acid Inhibitors Phosphate Monosodium Benzoic Acid Diammonium Phosphate Foam Control Agents Iron Sulfate (Copperas) Phosphate Morpholine Boil-Out Compounds Dicalcium Phosphate Formaldehyde Isobutyl Acetate Muriate of Potash Muriatic Biocides Diethanolamine Dimethyl Formic Acid Isobutyl Alcohol Acid Bleach Formamide Diethyl Fumaric Acid Isophorone N-Methyl Pyrrolidone Bleaching Agents Phthalate Diethylene Furfuryl Alcohol Isopropyl Acetate Nickel Acetate Blood Anticoagulants Glycol Diethylene Gluconic Acid Glucono Isopropyl Alcohol Nickel Carbonate Borax Triamine Penta Acetic Delta Lactone Lactic Acid Nickel Chloride Boric Acid Acid (DTPA) Glutaraldehyde Lime, Hydrated Nickel Sulfate nButyl Acetate Diethylethanolamine Glycerine Liquid Bisulfi te Nitric Acid nButyl Alcohol Dimethylethanolamine Glycol Ether DB Liquid Dechlorination and For more information on how Hydrite Chemical Co. can help your organization, call 262-792-1450. Providing Creative Solutions NTA Private Label Products Sodium Hydrosulfite TBEP Nutrients, Fermentation Process Oils Sodium Hydroxide Tetrapotassium Pyrophosphate Odorless Mineral Spirits Propylene Glycol Sodium Hypochlorite Tetrasodium Pyrophosphate Oxalic Acid Recycled Solvents Sodium Hyposulfi te Thermofl u ids Tetrahydrofuran nPropyl Acetate 100 Solvent Sodium Metasilicate (THF) Thickeners nPropyl Alcohol 140 Solvent Sodium Nitrate Toluol Paint Strippers 150 Solvent Sodium Nitrite Tricalcium Phosphate Paradichlorobenzene Salt Sodium Orthosilicate Trichlorethylene Paraformaldehyde Sanitizers Sodium Perborate Triethanolamine Triethylamine Peracetic acid Scale Control Agents Silicone Sodium Percarbonate Trisodium Phosphate Perchlorethylene Fluids & Emulsions Sizing Sodium Persulfate Urea Phenol Agents Sodium Phosphates Vinyl Resin Phosphoric Acid Soda Ash Sodium Sesquicarbonate VM&P Naphtha Pickling Acid Sodium Acetate Sodium Silicates Sodium Waste Treatment Chemicals Polyphosphoric Acid Sodium Acid Pyrophosphate Silicofl uor ide Sodium White Oils Potassium Acetate Sodium Benzoate Sulfate WIPE Potassium Benzoate Sodium Bicarbonate Sodium Sodium Sulfi de Xylol Potassium Bichromate Bichromate Sodium Bifl Sodium Sulfi te Zinc Ammonium Carbonate Potassium Bisulfi te uoride Sodium Tetrasulfate Zinc Chloride Potassium Carbonate Sodium Bisulfi te Sodium Tetrasulfi de Zinc Cyanide Potassium Chloride Sodium Bisulfate Sodium Tripolyphosphate Zinc Oxide Potassium Citrate Sodium Carbonate Sodium Xylene Sulfonate Zinc Sulfate Potassium Cyanide Sodium Chlorate Softening Aids Potassium Hydroxide (KOH) Sodium Chloride Solvent Blends Potassium Metabisulfi te Sodium Chlorite Sorbic Acid Potassium Permanganate Sodium Citrate* Stoddard Solvent Potassium Phosphates Sodium Cyanide Sulfamic Acid Potassium Silicate Sodium Fluroide Sulfi te Cooking Liquors Potassium Sorbate Sodium Formate Sulfur Dioxide Potassium Sulfi te Sodium Gluconate Sulfuric Acid Potassium Tripolyphosphate Sodium Hexametaphosphate Surface Active Agents Primary Amyl Acetate Sodium Hydrosulfi de Surfactants 300 North Patrick Boulevard P.O. BOX 0948 Brookfi eld, WI 53008-0948 Phone: 262-792-1450 Fax: 262-792-8721 H0612-02B HYDRITE.COM.
Load more

Recommended publications
  • Here the Nonspecific Term Cupreous Metals Is Used for Copper and the Alloys Such As Brass and Bronze Where Copper Predominates
    CONSERVAnON OF CUPREOUS METALS Here the nonspecific term cupreous metals is used for copper and the alloys such as brass and bronze where copper predominates. In general it matters little what the specific alloy is, for they are usually treated in the same way. Care needs to be taken only when there is a high percentage of lead or tin, both of which are amphoteric metals and dissolve in alkaline solutions. There are a considerable number of chemical treatments for copper, bronze and brass, and most are not satisfactory for cupreous metals from marine sites. Consult the bibliography at the end of this section for further information. In a marine environment the two most commonly encountered copper corrosion products are cuprous chloride and cuprous sulfide. However, the mineral alterations in the copper alloys are more complex than those of just copper. Once any cupreous object is recovered and exposed to the air, it continues to corrode by a process referred to as bronze disease. Cuprous cblorides in the presence of moisture and oxygen are hydrolyzed to form hydrochloric acid and basic cupric chloride. The hydrochloric acid in turn attacks thc uncorroded metal to form more cuprous chloride. The reaction continues until no metal remains. Any conservation of chloride contaminated cupreous objects requires that I) the cuprous chlorides be removed, 2) the cuprous chlorides be converted to harmless cuprous oxide, or 3) the chemical action of the chlorides be prevented. Cbemical Cleaning Tecbniques I. ACIDS All acid treatments require a solid metal core. All acids can and will strip off corrosion layers down to bare metal and many will even etch the barc metal.
    [Show full text]
  • Safety Data Sheet
    SAFETY DATA SHEET Preparation Date: No data available Revision Date: 04/24/2015 Revision Number: G1 Product identifier Product code: P1343 Product Name: POTASSIUM METABISULFITE, CRYSTAL, REAGENT Other means of identification Synonyms: Dipotassium pyrosulfite; Dipotassium disulfite; Dipotassium metabisulfite; Potassium disulfite; Pyrosulfurous acid, dipotassium salt CAS #: 16731-55-8 RTECS # TT4920000 CI#: Not available Recommended use of the chemical and restrictions on use Recommended use: No information available. Uses advised against No information available Supplier: Spectrum Chemicals and Laboratory Products, Inc. 14422 South San Pedro St. Gardena, CA 90248 (310) 516-8000 Order Online At: https://www.spectrumchemical.com Emergency telephone number Chemtrec 1-800-424-9300 Contact Person: Martin LaBenz (West Coast) Contact Person: Ibad Tirmiz (East Coast) 2. HAZARDS IDENTIFICATION Classification This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Serious eye damage/eye irritation Category 2A Respiratory sensitization Category 1A Skin sensitization Category 1B Label elements Product code: P1343 Product name: POTASSIUM 1 / 12 METABISULFITE, CRYSTAL, REAGENT Danger Hazard statements May be harmful if swallowed Causes serious eye irritation May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause an allergic skin reaction May ignite in milling or grinding Liberates sulfur dioxide on contact with acids or in fire Hazards not otherwise classified (HNOC) Not Applicable
    [Show full text]
  • So2 and Wine: a Review
    OIV COLLECTIVE EXPERTISE DOCUMENT SO2 AND WINE: A REVIEW SO2 AND WINE: A REVIEW 1 MARCH 2021 OIV COLLECTIVE EXPERTISE DOCUMENT SO2 AND WINE: A REVIEW WARNING This document has not been submitted to the step procedure for examining resolutions and cannot in any way be treated as an OIV resolution. Only resolutions adopted by the Member States of the OIV have an official character. This document has been drafted in the framework of Expert Group “Food safety” and revised by other OIV Commissions. This document, drafted and developed on the initiative of the OIV, is a collective expert report. © OIV publications, 1st Edition: March 2021 (Paris, France) ISBN 978-2-85038-022-8 OIV - International Organisation of Vine and Wine 35, rue de Monceau F-75008 Paris - France www.oiv.int 2 MARCH 2021 OIV COLLECTIVE EXPERTISE DOCUMENT SO2 AND WINE: A REVIEW SCOPE The group of experts « Food safety » of the OIV has worked extensively on the safety assessment of different compounds found in vitivinicultural products. This document aims to gather more specific information on SO2. This document has been prepared taking into consideration the information provided during the different sessions of the group of experts “Food safety” and information provided by Member States. Finally, this document, drafted and developed on the initiative of the OIV, is a collective expert report. This review is based on the help of scientific literature and technical works available until date of publishing. COORDINATOR OIV - International Organisation of Vine and Wine AUTHORS Dr. Creina Stockley (AU) Dr. Angelika Paschke-Kratzin (DE) Pr.
    [Show full text]
  • Safety Assessment of Sulfites As Used in Cosmetics
    Safety Assessment of Sulfites as Used in Cosmetics Status: Re-Review for Panel Consideration Release Date: August 22, 2019 Panel Meeting Date: September 16-17, 2019 The 2019 Cosmetic Ingredient Review Expert Panel members are: Chair, Wilma F. Bergfeld, M.D., F.A.C.P.; Donald V. Belsito, M.D.; Curtis D. Klaassen, Ph.D.; Daniel C. Liebler, Ph.D.; James G. Marks, Jr., M.D., Ronald C. Shank, Ph.D.; Thomas J. Slaga, Ph.D.; and Paul W. Snyder, D.V.M., Ph.D. The CIR Executive Director is Bart Heldreth, Ph.D. This safety assessment was prepared by Wilbur Johnson, Jr., Senior Scientific Analyst © Cosmetic Ingredient Review 1620 L Street, NW, Suite 1200 ♢ Washington, DC 20036-4702 ♢ ph 202.331.0651 ♢ fax 202.331.0088 ♢ [email protected] Distributed for Comment Only -- Do Not Cite or Quote Commitment & Credibility since 1976 Memorandum To: CIR Expert Panel Members and Liaisons From: Wilbur Johnson, Jr. Senior Scientific Analyst Date: August 22, 2019 Subject: Re-Review of the Safety Assessment of Sulfites The CIR Expert Panel first reviewed the safety of Sulfites in 2003. The Panel concluded that Ammonium Bisulfite, Ammonium Sulfite, Potassium Metabisulfite, Potassium Sulfite, Sodium Bisulfite, Sodium Metabisulfite, and Sodium Sulfite are safe as used in cosmetic formulations. The original report is included for your use (identified as sulfit092019orig in the pdf). Minutes from the deliberations of the original review are also included (sulfit092019min_orig). Because it has been at least 15 years since the safety assessment was published, in accordance with CIR Procedures, the Panel should consider whether the safety assessment of Sulfites should be reopened.
    [Show full text]
  • Science Approach Document for Substances with Low Human Health Hazard Potential
    Science approach document for substances with low human health hazard potential Health Canada December 2017 Cat. No.: En14-301/2017E-PDF ISBN 978-0-660-24247-7 Information contained in this publication or product may be reproduced, in part or in whole, and by any means, for personal or public non-commercial purposes, without charge or further permission, unless otherwise specified. You are asked to: • Exercise due diligence in ensuring the accuracy of the materials reproduced; • Indicate both the complete title of the materials reproduced, as well as the author organization; and • Indicate that the reproduction is a copy of an official work that is published by the Government of Canada and that the reproduction has not been produced in affiliation with or with the endorsement of the Government of Canada. Commercial reproduction and distribution is prohibited except with written permission from the author. For more information, please contact Environment and Climate Change Canada’s Inquiry Centre at 1-800-668-6767 (in Canada only) or 819-997-2800 or email to [email protected]. © Her Majesty the Queen in Right of Canada, represented by the Minister of the Environment and Climate Change, 2016. Aussi disponible en français Synopsis Pursuant to section 68 of the Canadian Environmental Protection Act, 1999 (CEPA), Health Canada has evaluated a subset of 14 substances of the approximately 1550 remaining priority substances under the Chemicals Management Plan. These 1550 substances were identified as priorities for assessment as they met categorization criteria under subsection 73(1) of CEPA and/or were considered a priority based on human health concerns.
    [Show full text]
  • Sulfur Dioxide and Some Sulfites, Bisulfites and Metabisulfites
    SULFUR DIOXIDE AND SOME SULFITES, BISULFITES AND METABISULFITES 1. Exposure Data 1.1 Chemical and physical data 1.1.1 Synonyms and structural and molecular data Sulfr dioxi Chem. Abstr. Serv Reg. No.: 7446-09-5 Replaced CAS Nos.: 8014-94-6; 12396-99-5; 83008-56-4; 89125-89-3 Chem. Abstr. Name; Sulfur dioxide IUPAC Systematic Name: Sulfur dioxide Synonyms: Sulfurous acid anhydride; sulfurous anhydride; sulfurous oxide; sulfur oxide (S02); sulfur superoxide; sulphur dioxide 0=8=0 S02 MoL. wt: 64.07 Sodium sulfte Chem. Abstr. Serv Reg. No.: 7757-83-7 Altemate CAS No.: 10579-83-6 Replaced CAS No.: 68135-69-3 Chem. Abstr. Name: Sulfurous acid, di sodium salt IUPAC Systematic Name: Sulfurous acid, disodium salt Synonyms: Anhydrous sodium sulfite; disodium sulfite; sodium sulphite o 1/ Na · 0 - 8 - 0 · Na Na2S0J MoL. wt: 126.04 Sodium bisulfe Chem. Abstr. Serv Reg. No.: 7631-90-5 Replaced CAS Nos.: 57414-01-4; 69098-86-8; 89830-27-3; 91829-63-9 Chem. Abstr. Name: Sulfurous acid, monosodium salt IUPAC Systematic Name: Sulfurous acid, monosodium salt -131- 132 lARe MONOGRAPHS VOLUME 54 Synonyms: Hydrogen sulfite sodium; monosodium sulfite; sodium acid sulfite; sodium bisulphite; sodium hydrogen sulfite; sodium sulfite (NaHS03) o Il HO - S - a · Na NaHS03 MoL. wt: 104.06 Sodium metabisulfte Chem. Abstr. Serv Reg. No.: 7681-57-4 Altemate CAS No.: 7757-74-6 Replaced CAS No.: 15771-29-6 Chem. Abstr. Name: Disulfurous acid, disodium salt IUPAC Systematic Name: Pyrosulfurous acid, disodium salt Synonyms: Disodium disulfite; disodium metabisulfite; disodium pyrosulfite; sodium disulfite; sodium metabisulphite; sodium pyrosulfite oIl Il0 Na · 0- S - a - S - a · Na .Na2S20S MoL.
    [Show full text]
  • Bronze Disease: Understanding, Curing, and Preventative Treatment Jason Sanchez Associate, American Numismatic Society Member, Crescent City Coin Club
    Bronze Disease: Understanding, Curing, and Preventative Treatment Jason Sanchez Associate, American Numismatic Society Member, Crescent City Coin Club Dr. Ken Harl, Ph.D Tulane University History Department Fellow and Trustee, American Numismatic Society Agenda Bronze Disease: Understanding, Curing and Preventative Treatment ¨What is Bronze Disease? ¨Do I have a Patina, or Bronze Disease? ¨If I have Bronze Disease, what do I do? ¨Long-term care: serious storage concerns 1 What is Bronze? Before we find out about Bronze Disease, first, the more important question: what is Bronze? ¨ An alloy of Copper (CU) of more than 90% purity in conjunction with other metals (usually tin, antimony and zinc) ¨ One of the first metals used by man – “Bronze Age” man dated from c. 3,000 BCE in Asia Minor, but the use of bronze is noted in some parts of Asia (Chiang Mai, Thailand and Sanxingdui, China) by c. 4,500 BCE ¨ American Pre-Columbian use of Bronze may have begun by 1000 CE ¨ Bronze was one of the first metals that was used for coinage ¨ Bronze coinage by far outstrips silver or gold as a constituent of the money supply for most countries up to the modern age 2 What is Bronze Disease? ¨Bronze “disease” is a condition in which the coin produces acid (normally hydrochloric or hydrosulfuric acid) internally, and begins to disintegrate ¨The exterior usually exhibits green or brown “growths” that cover the pitting that acids will create ¨Because these growths were originally believed to be caused by a bacteria, the condition became known as bronze “disease”
    [Show full text]
  • Downloaded 10/6/2021 5:58:07 PM
    ORGANIC CHEMISTRY FRONTIERS View Article Online REVIEW View Journal | View Issue The same oxygenation-state introduction of hypervalent sulfur under transition-metal-free Cite this: Org. Chem. Front., 2020, 7, 3956 conditions Daming Zeng,a Ming Wang, *b Wei-Ping Deng a and Xuefeng Jiang *b Sulfonyl compounds have attracted considerable interest due to their extensive applications in drug dis- covery. Access to the assembly of SO2-containing compounds via the oxygenation oxidative-state intro- Received 17th August 2020, duction of hypervalent sulfur has come to the fore in recent years. This review discusses the application Accepted 16th October 2020 of the same oxygenation-state introduction of hypervalent sulfur strategy under transition-metal-free DOI: 10.1039/d0qo00987c conditions, and presents it in light of different atoms being linked to the sulfonyl group, including sul- rsc.li/frontiers-organic fones, sulfonamides, sulfonyl fluorides and thiosulfonates. 1 Introduction synthesis of sulfonamides rely on the nucleophilic coupling of a pre-installed sulfonyl precursor, that is, sulfonyl chloride Sulfonyl compounds, having a long and rich history, most used most frequently, and appropriate amine sources.6 notably sulfones and sulfonamides,1 have received great atten- However, the substrates are usually derived from the odorous tion as demonstrated by their extensive applications in and unfriendly thiols, and the reactions need to be performed medical,2 agricultural3 and materials science.4 Therefore, the under harsh conditions, resulting in a low functional group construction of sulfone-containing compounds could be of tolerance and thus hampering their advancement in industrial considerable significance. Sulfonyl compounds are tradition- applications. In order to distinguish the change of inorganic ally delivered via the oxidation of sulfides or the combination sulfur to organic sulfide, the concept of oxygenation-state was of sulfinates with aryl or alkyl electrophiles.5 Strategies for the used (Scheme 1a).
    [Show full text]
  • Coei-1-Potanh: 2000
    INTERNATIONAL ŒNOLOGICAL CODEX Potassium Anhydrous Sulfite COEI-1-POTANH: 2000 POTASSIUM ANHYDROUS SULFITE Potassium pyrosulfite Potassium disulfite Potassium metabisulfite Kalii metabisulfis K2S2O5 = 222.3 SIN No. 224 (Oeno 34/2000) 1. OBJECTIVE, ORIGIN AND SCOPE OF APPLICATION Potassium anhydrous sulfite, commonly called potassium metabisulfite, is used because of the sulfur dioxide it makes available. Potassium metabisulfite, which is sold in powdered form, contains 52- 55% by weight SO2. There are regulatory limits restricting the sulfur dioxide content of wines. 2. LABELING The label should indicate the product's purity as well as its safety and storage conditions. 3. CENTESIMAL COMPOSITION Sulfur dioxide 57.63 Potassium 35.17 4. SOLUBILITY Water at 20 °C 454.5 g/l Alcohol, 95% by vol. insoluble 5. IDENTIFYING PROPERTIES 5.1. 5 ml of aqueous 10 pp 100 (m/v) solution treated with 5 ml of 1/10 diluted sulfuric acid (R) releases sulfur dioxide and reduces iodine and potassium permanganate. 5.2. The 10 pp 100 (m/v) aqueous solution is acidic as indicated by methyl red (R) of (pHapproximately 5). E-COEI-1-POTANH 1 INTERNATIONAL ŒNOLOGICAL CODEX Potassium Anhydrous Sulfite COEI-1-POTANH: 2000 5.3. The 1 pp 100 (m/v) aqueous solution produces potassium- based reactions. 6. TESTS 6.1. Preparing the Test Solution in a Concentration of 10 pp 100 Prepare a solution in a concentration of 10 pp 1000 (m/v). 6.2. Preparing a Test Solution in a Concentration of 1 pp 100 Prepare a 1 pp 100 (m/v) solution by diluting the previous solution (6.1) to 1/10.
    [Show full text]
  • Alcohols: Ethanol Isopropanol 205.601 (A) As Algicide, Disinfectants, and Sanitizer, Including Irrigation System Cleaning Systems
    March 23, 2018 Ms. Michelle Arsenault National Organic Standards Board USDA-AMS-NOP 1400 Independence Ave. SW., Room 2648-S, Mail Stop 0268 Washington, DC 20250-0268 Re. CS: 2020 Sunset These comments to the National Organic Standards Board (NOSB) on its Spring 2018 agenda are submitted on behalf of Beyond Pesticides. Founded in 1981 as a national, grassroots, membership organization that represents community-based organizations and a range of people seeking to bridge the interests of consumers, farmers and farmworkers, Beyond Pesticides advances improved protections from pesticides and alternative pest management strategies that reduce or eliminate a reliance on pesticides. Our membership and network span the 50 states and the world. Alcohols: Ethanol Isopropanol 205.601 (a) As algicide, disinfectants, and sanitizer, including irrigation system cleaning systems. (1) Alcohols. (i) Ethanol. As algicide, disinfectants, and sanitizer, including irrigation system cleaning systems. (ii) Isopropanol. As algicide, disinfectants, and sanitizer, including irrigation system cleaning systems. Analysis during the most recent sunset review pointed out hazards associated with accidental releases during manufacture or transportation. Ethanol may also be made from ethylene or by fermentation, and the usual feedstock is conventional (usually genetically engineered) corn, which contributes to environmental degradation and loss of biodiversity in its production. The use of both alcohols can lead to irritation from vapors and local damage to microbiota in the case of spills. Alternative practices include heat treatment of tools, pruning in hot, dry conditions, and preventive landscape conditions. Natural alternatives are identified in the checklist: nonsynthetic ethanol, nonsynthetic organic acids (acetic, citric, lactic), antiseptic essential oils. Examples of the strongest and most commonly used antiseptic essential oils include clove oil, melaleuca oil, and oregano oil.
    [Show full text]
  • DATA SHEET 5-52PI (1-933) Supersedes 5-52PI (1-84) Atlas Minerals & Chemicals, Inc
    DATA SHEET 5-52PI (1-933) Supersedes 5-52PI (1-84) Atlas Minerals & Chemicals, Inc. VITREX® K MORTAR PHYSICAL PROPERTIES PROPERTY TEST TYPICAL DESCRIPTION AND USES METHOD VALUE VITREX K MORTAR is a potassium silicate corrosion Density ASTM C905 115 lb./cu. ft. resistant mortar which sets by chemical action. When (1.84 g./cc.) cured, VITREX K MORTAR exhibits outstanding Bond Strength, ASTM C321 150 psi. chemical resistance to dilute and high concentrations 7 days @ 77oF (25oC) (1.04 MPa) of oxidizing and non-oxidizing acids at temperatures Tensile Strength, ASTM C307 600 psi. o o to 1,700oF (927oC). Due to its excellent thermal and 7 days @ 77 F (25 C) (4.14 MPa) chemical resistance, VITREX K MORTAR is suitable Compressive Strength, ASTM C579 5,000 psi. 7 days @ 77oF (25oC) (34.5 MPa) for jointing acid resistant masonry sheathings in stacks, chimneys, ducts, absorbers, scrubbers and Flexural Strength, ASTM C580 1,800 psi. 7 days @ 77oF (25oC) (12.4 MPa) other high temperature process equipment. VITREX K Water Absorption ASTM C413 18% MORTAR complies with the specifications of ASTM C466 for chemically setting silicate and silica chemical Linear Shrinkage ASTM C531 2.8% resistant mortar. When mechanically mixing, the batch size should not CHEMICAL RESISTANCE exceed 30 lb. (13.6 kg.). When mixing by hand, use a When cured, VITREX K MORTAR is resistant to many shallow mixing pan (stainless steel, aluminum or organic and inorganic acids, salts and solvents. porcelain). Thoroughly mix only the amount of mortar Chemical resistant masonry sheathings jointed with that can be used in 20 minutes.
    [Show full text]
  • Sodium and Potassium Silicates, Is Markedly Demonstrated by Its Ability to Alter the Surface 10.000 Characteristics of Various Materials in Different Ways
    M2CO3 + x SiO2 ➡ M2O . x SiO2 + C02 (M = Na, K) Introduction Contents PQ Europe represents the European subsidiary of 1 The production process 3 PQ Corporation, USA. PQ Corporation was founded 2 Physical properties of soluble silicates 5 in 1831 and belongs today to the world’s most - ratio succesful developers and producers of inorganic - density chemicals, in particular on the field of soluble - viscosity silicates, silica derived products and glass spheres. - potassium silicate PQ operates worldwide over 60 manufacturing plants in 20 countries. PQ serves a large variety of 3 Chemical properties of industries, including detergents, high way safety, soluble silicates 7 pulp and paper, petroleum processing and food and - pH behavior and buffering capacity beverages with a broad range of environmental - stability of silicate solutions friendly performance products. - reactions with acids (sol and gel formation) More than 150 years of experience in R&D and - reaction with acid forming products production of silicates in USA and Europe guarantee ("In-situ"gel formation) high performance and high quality silicates made - precipitation reactions, reaction with metal ions according to ISO 9001 and ISO 14001 standards - interaction with organic compounds and marketed via our extensive network of sales - adsorption offices, agents and distributors. - complex formation 4 Properties of potassium silicates 8 vs. sodium silicates 5 Chemistry of silicate solutions 9 6 Applications 11 7 Storing and handling of PQ Europe 14 liquid silicates - storage - pumps - handling and safety 8 Production locations 15 Sand Caustic soda PremixReactor Temporary Filter Final storage storage Water The Hydrothermal Route 2 1 Sodium and potassium silicate glasses (lumps) are The production produced by the direct fusion of precisely measured process portions of pure silica sand (SiO2) and soda ash (Na2CO3) or potash (K2CO3) in oil, gas or electrically fired furnaces at temperatures above 1000 °C according to the following reaction: M2CO3 + x SiO2 ➡ M2O .
    [Show full text]