LEVEL EYE® Series 1100 Phillips® REFRIGERATION BULLETIN 1100-08E-01 VALVES • VESSELS • SYSTEMS • CONTROLS Engineering Data

For Ammonia (R717) and Halocarbon Refrigerants

Features • Suitable for ASME Code Vessels • 1000 PSI/69 bar Working Pressure Limit • SA36 Steel Construction Standard • Available in Stainless Steel • Suitable for Low Temperature Applications (-60°F /-51°C) • 1100A–Canadian Registered (All Provinces)–CRN0F0829.2C

Description Design Function The Phillips® Level Eye® is a reliable, industrial- The Series 1100 Level Eye is machined from SA36 type sight glass. The reflex lens indicates the true level of material, as specified in Section VIII, Division I of the liquid present without requiring a second lens. The lens ASME Boiler & Pressure Vessel Code. The housing may appears dark in the presence of liquid and clear when be welded directly into ASME Code vessels. The welding liquid is not present. Both reflex and clear lenses are suit- end is dimensioned to a nominal 1 1/2” IPS schedule 80 able for refrigerant vessels such as receivers, intercoolers, pipe. The weld neck or threaded neck is dimensioned suction accumulators, oil separators, surge drums, oil to nominal 1 1/2” schedule 80 pipe. All retainers are pots, columns, and liquid line indicators. annealed 416 stainless steel forgings. Type 304 stainless The standard length frost shield allows clear vision steel housings are also available in a 2” length. with refrigerant temperatures down to -20°F /-29°C, The 1101 clear lens and 1101R reflex lens are both and a 1” longer frost shield is available for refrigerant made of borosilicate glass. Both are used with a neoprene temperatures below -20°F /-29°C. rubber gasket on the inside and a fiber buffer gasket on the outside (between the glass and the retainer). The maximum temperature differential for all glass is 477°F; the maximum temperature for the gaskets is 250°F. The maximum working pressure is 1000 PSI. For applications below -20° /-29°C refer to figure UCS-66.01 of the ASME Code. Rupture of the glass in tests occurred in excess of 14,000 PSI. The Phillips Series 1100A and 1100 Level Eye is in compliance with the intent of the ASME Boiler & Pressure Vessel Code, Section VIII, Division I.

8 Visit us at: www.haphillips.com or e-mail us at: [email protected] 8 Level Eye® Assemblies and Parts

® ® LEVEL EYE ASSEMBLIES LEVEL EYE CONFIGURATIONS3 STANDARD (N) AND EXTENDED 4 FROST SHIELD (N) Housing Part Housing Connection Weight STANDARD(NX) (N) ANDFROST EXTENDED SHIELDS 31-3/4" FROST EXTENDED SHIELD (N) AVAILABLE ON ALL LEVEL EYES 4 Style/Mat’lHousing NumberPart * LengthHousing ConnectionGeometry Weight(lb) (NX) FROST SHIELDS 1-3/4" FROST EXTENDED SHIELD (NX) Style/Mat’l Number Length Geometry (lb) AVAILABLE ON ALL LEVEL EYES FROST3 SHIELD (NX) 1100* 2” Square End 1-1/2 STANDARD (N) AND EXTENDED 4 FROST SHIELD (N) Housing 1100A1100Part Housing 3” 2” Square SquareConnection EndEnd 1-1/2Weight 2 (NX) FROST SHIELDS 1-3/4" EXTENDED Weld, AVAILABLE ON ALL LEVEL EYES Style/Mat’l 1100C1100ANumber * 2”Length 3” Saddle SquareGeometry Milled End 1-1/2 2(lb) FROST SHIELD (NX) SA36Weld, 1100, 1100L1100C1100 4” 2” 2” SaddleSquare Square MilledEnd End 1-1/2 3 1-1/2 Ø1.90 SA36 Ø21 1100, 1100L1100A 4” 3” Square Square End End 3 2 2 Ø1.90R 13 1100S, Weld, 1100LC 4” Saddle Milled 3 Ø21 4 2 1100C3 1100S, Weld, 1100S1100LC1100C 2” 4” 2” SaddleSquare Saddle MilledEnd Milled 1-1/2 31-1/2 R 14 1100, SA36 Ø1.90 1100C 304SSWeld, 1100LS1100S1100L 4” 2” 4” Square Square Square EndEnd End 1-1/2 3 3 1 1100C 1100C Ø22 3 1100S, Threaded,304SS 1100AT1100LS1100LC 3” 4” 4” 1-1/2” Square Saddle MPT End Milled 2 3 3 R 14 SADDLE MILLED 1100C 2 Threaded,SA36Weld, 1100T1100AT1100S 4” 3” 2” 1-1/2” 1-1/2” Square MPTMPT End 3 21-1/2 2 1100C SADDLE MILLED1100LC 23 Thd’dSA36 Steel304SS 1100T1100LS 4” 4” 1-1/2” Square MPT End 3 3 8 1100LC 23 Thd’dThreaded, Steel 1100V1100AT 1-1/2” 3” 2” 1-1/2” MPT MPT 1-1/2 2 82 Forging 1100V 1-1/2” 2” MPT 1-1/2 SADDLE MILLED ForgingSA36 1100T 4” 1-1/2” MPT 3 1100LC1-1/2" MPT 1100AT 23 Thd’d Steel 1-1/2" MPT 1100AT 8 33 * For complete part1100V number, specify: 1-1/2” 2” MPT 1-1/2 8 Forging 33 3 8 • Lens: Clear lens (Blank) or Reflex lens (“R”) 1-1/2" MPT3 1100AT 33 • Frost Shield: No shield (Blank), Standard (“N”), or 8 3 1100AT Extended (“NX”) Ø1.90 1100AT Ø21Ø1.90 • Gasket Material: Standard neoprene gasket (Blank) 12 Ø22 1100AT or PTFE gasket (“T”) Ø1.90 1100A 1 1100A Examples: Ø22 1100A 4” stainless steel Level Eye® with reflex lens, extended 1-1/2" MPT 1100T frost shield and PTFE gasket is 1100LS-RNXT 1-1/2" MPT 1100T 43 438 2” saddle milled Level Eye® with clear lens and standard 1-1/2" MPT 1100T4 8 4 frost shield is 1100C-N 43 8 Part Type Part Description 4 1100T Part Type Part Description Ø1.90 1100T Number Ø1.90 Number PARTS 1 3 1100H 2” Long Housing, Square End Ø2 R 143 Part Type Part Description Ø221 R 1 1100T 1100H 2” Long Housing, Square End 2 Ø1.901100LC4 1100L, 1100AHNumber 3” Long Housing, Square End 1100LC 1100L, Housings, 1100AH 3” Long Housing, Square End 3 Housings, 1100CH 2” Long Housing, Saddle Milled Ø21 R 1 1100LS, Weld, SA36 1100CH1100H 2” 2”Long Long Housing, Housing, Saddle Square Milled End 2 4 1100LS,1100L, Weld, SA36 1100LH1100AH 4” Long 3” Long Housing, Housing, Square Square End End 1100LC Housings, 1100LH 4” Long Housing, Square End SADDLE MILLED 1100LC 1100LCH1100CH 4” Long 2” Long Housing, Housing, Saddle Saddle Milled Milled SADDLE MILLED 1100LC1100LS, Weld, SA36 1100LCH 4” Long Housing, Saddle Milled 1100LC Housings, 1100SH1100LH 2” Long 4” Long Housing, Housing, Square Square End End 1100LC Housings, 1100SH 2” Long Housing, Square End SADDLE MILLED 1100LC Weld, 304SS 1100LSH 4” Long Housing, Square End Weld, 304SS 1100LSH1100LCH 4” 4”Long Long Housing, Housing, Square Saddle End Milled 1100LC Housings, 1100SH 2” Long Housing, Square End Housings,Housings, 1100ATH1100ATH 3” 3” Long Long Housing, Housing, 1-1/2” 1-1/2” MPTMPT Threaded,Weld, 304SS 1100LSH 4” Long Housing, Square End Ø25 Threaded, Ø258 1100V 1100TH1100TH 4” 4” Long Long Housing, Housing, 1-1/2” 1-1/2” MPTMPT 8 1100V SA36SA36Housings, 1100ATH 3” Long Housing, 1-1/2” MPT Housing,Threaded, Ø25 Housing, 1100TH 4” Long Housing, 1-1/2” MPT 8 1100V ThreadedThreadedSA36 Steel Steel 1100VH1100VH 1-1/2” 1-1/2” Long Long Housing, Housing, 2” 2” MPTMPT ForgingForgingHousing, 2" MPT 11 Threaded Steel 1100VH 1-1/2” Long Housing, 2” MPT 2" MPT 112 11011101 Clear Clear Lens, Lens, Tempered Tempered GlassGlass 2 Lenses 177 LensesForging 1101R Reflex Lens, Tempered Glass 1 8 1101R Reflex Lens, Tempered Glass 2" MPT 11 8 1101 Clear Lens, Tempered Glass 2 RetainerRetainerLenses 1102SH 1102SH Retainer, Retainer, Forged Forged 416SS 416SS HexHex 7 1101R Reflex Lens, Tempered Glass 1 11031103 Gasket, Gasket, Neoprene Neoprene 8 Retainer 1102SH Retainer, Forged 416SS Hex GasketsGaskets & & 1103T1103T Gasket, Gasket, PTFE PTFE 1103 Gasket, Neoprene O-RingsO-Rings 11041104 Gasket, Gasket, Vulcanized Vulcanized Fiber Fiber Gaskets & 1103T Gasket, PTFE 1103/1103T 11061106 O-Ring, O-Ring, Neoprene Neoprene O-Rings 1104 Gasket, Vulcanized Fiber FrostFrost Shield, Shield, Acrylic, Acrylic, 110511051106 O-Ring, Neoprene StandardStandard Length Length (N) (N) 1104 FrostFrost Shields Shields Frost Shield, Acrylic, 1105 FrostFrost Shield, Shield, Acrylic, Acrylic, 1105L1105L Standard Length (N) Frost Shields ExtendedExtended Length Length (NX) (NX) Frost Shield, Acrylic, 1106 1105L Extended Length (NX) 1100 Housing INSTRUCTIONS 1. Verify proper assembly order as shown in exploded 1101/1101R drawing (right). 1102SH 2. Tighten 1102SH retainer to 30-40 ft-lbs torque. 1105/1105L

H. A. Phillips & Co. 1612 Louise Drive South Elgin, IL 60177-2242 U.S.A. Phone: (630) 377-0050 • Fax: (630) 377-2706 E-mail: [email protected] or visit us @ www.haphillips.com