VALVES • VESSELS • SYSTEMS • CONTROLS H. A. Phillips & Co. 1775 Wallace Ave. St. Charles, IL 60174-2387 Phone: 630-377-0050 Fax: 630-377-2706 www.haphillips.com
LP-090105 Effective September 1, 2005 Supercedes all previous List Prices LIST PRICES WITH SIZES & MODEL NUMBERS
All prices shown are U.S. dollars and are subject to change without notice. All prices shown are F.O.B. factory.
PRODUCT TYPE PAGE NO. Level Eyes® (Liquid Level Sight Glasses) 2 Injectors (Liquid Recirculating) 2 Float Switch (Electromagnetic) 2 Filters/Strainers 2 Flanges & Flanged Unions 3 High Side Float Valves & Pilot Operated Float Controls 4 Three-Way Valves (Solenoid Operated) 5 Check Valves (Disc Type and Piston Type) 5 - 6 Low Side Float Valves & Pilot Operated Float Controls 7 - 9 Part Kits 10 - 11 Replacement Parts 12 - 15 RMA Policy & Limited Product Warranty 15 Terms and Conditions of Sale 16
Please consult factory for pricing on the following products: Oil Pots, Level Eye® Columns, ASME Pressure Vessels, Liquid Return Systems, Gas Pressure Recirculation Systems, and Mechanical Pump Recirculation Systems
H.A. Phillips and Co. 1 LP-090105 LEVEL EYE® (LIQUID LEVEL SIGHT GLASSES) REF: BULLETIN LE 1100-03E Weld Housings Threaded Housings - 1-1/2" MPT
Part No. Length Part No. Length Part No. Length Part No. Length w/Reflex Lens In. List Price w/Clear Lens In. List Price w/Reflex Lens In. List Price w/Clear Lens In. List Price 1100-R 2" $96 1100 2" $106 1100AT-R 3" $122 1100AT 3" $132 1100-RN 2" $119 1100-N 2" $130 1100AT-RN 3" $145 1100AT-N 3" $156 1100-RNX 2" $129 1100-NX 2" $139 1100AT-RNX 3" $156 1100AT-NX 3" $166 1100A-R 3" $108 1100A* 3" $118 1100T-R 4" $140 1100T 4" $150 1100A-RN 3" $132 1100A-N* 3" $142 1100T-RN 4" $163 1100T-N 4" $173 1100A-RNX 3" $142 1100A-NX* 3" $152 1100T-RNX 4" $174 1100T-NX 4" $184 1100L-R 4" $125 1100L 4" $135 1100V-R † 2" $235 1100V † 2" $245 1100L-RN 4" $148 1100L-N 4" $159 1100V-RN † 2" $258 1100V-N † 2" $269 1100L-RNX 4" $159 1100L-NX 4" $169 1100V-RNX † 2" $269 1100V-NX † 2" $279 † 2" MPT
Stainless Steel Housings - Weld End Scarfed Housings - Weld End
Part No. Length Part No. Length Part No. Length Part No. Length w/Reflex Lens In. List Price w/Clear Lens In. List Price w/Reflex Lens In. List Price w/Clear Lens In. List Price 1100S-R 2" $239 1100S 2" $249 1100C-R 2" $103 1100C 2" $113 1100S-RN 2" $262 1100S-N 2" $272 1100C-RN 2" $128 1100C-N 2" $138 1100S-RNX 2" $272 1100S-NX 2" $282 1100C-RNX 2" $140 1100C-NX 2" $150 1100LS-R 4" $294 1100LS 4" $304 1100LC-R 4" $133 1100LC 4" $143 1100LS-RN 4" $316 1100LS-N 4" $327 1100LC-RN 4" $157 1100LC-N 4" $167 1100LS-RNX 4" $328 1100LS-NX 4" $338 1100LC-RNX 4" $166 1100LC-NX 4" $176
INJECTORS FLOAT SWITCH FILTERS/STRAINERS (LIQUID RECIRCULATING) REF: BULLETIN FSP-03E (FOR LIQUID LINES) REF: BULLETIN INJ-03E Part No. List Price Filter Number List Price w/flanges Injector No. List Price FSP $622 510-1/2" angle $146 - 2020SL $299 FSPLE $908 510-3/4" angle $146 - 2100SL $387 HAP85 $1,127 575-3/4" angle $396 - 2075WCB $539 PARTS 575-1" angle $396 - 2100WCB $562 Part No. List Price 575-1-1/4" angle $396 - 2100WCBA $562 FSPSW $287 S701JRP $183 $231 2125WA $549 KDIN $26 S701 $212 $280 2150WA $896 HLLSW $406 S701A $507 $591 2200WA $1,749 C $67 S701B $1,009 $1,133 2250WA $2,511 Bracket, Ball $313 NOTES: ORDERING INSTRUCTIONS: 1. The S701 filters mate with series 700 and 701 1. Injector Number 4. Inlet prssure and temperature valves. Gasket, Nuts & Bolts included. 2. Nozzle & throat size 5. Suction temperature 2. Flanges: Socket Weld standard, threaded available 3. Refrigerant 6. Load (tons) except for S701B. Gaskets, Nuts & Bolts included. 7. Application
H.A. Phillips and Co. 2 LP-090105 FLANGES TONGUE & GROOVE REF: BULLETIN FLUN-03E Socket Weld Threaded Weld Neck Size Part No. List Price Part No. List Price Part No. List Price 1/2" oval 4-MS or 4-FS $28 4-MT or 4FT $32 N/A - 3/4" oval 6-MS or 6-FS $28 6-MT or 6FT $32 N/A - 1" oval 8-MSO or 8-FSO $28 8-MTO or 8-FTO $32 N/A - 1" sq. 8-MS or 8-FS $44 8-MT or 8-FT $50 N/A - 1-1/4" sq. 10-MS or 10-FS $44 10-MT or 10FT $50 10-WM or 10WF $60 1-1/2" sq. 12-MS or 12-FS $46 12-MT or 12-FT $53 12-WM or 12WF $70 2"sq. 16-MS or 16-FS $48 16-MT or 16-FT $61 16-WM or 16-WF $78 2-1/2" sq. 20-MS or 20-FS $50 N/A - 20-WM or 20-WF $96 3" sq. 24-MS or 24-FS $64 N/A - 24-WM or 24-WF $120 4" sq. 32-MS or 32-FS $88 N/A - 32-WM or 32-WF $156 5" rd. 40-MS or 40-FS $218 N/A - 40-WM or 40-WF $300 6" rd. 48-MS or 48-FS $270 N/A - 48-WM or 48-WF $330 8" rd. 64-MS or 64-FS $388 N/A - 64-WM or 64-WF $506 10" rd. 80-MS or 80-FS $850 N/A - 80-WM or 80-WF $890
ORDERING INSTRUCTIONS: 1. Flange Connection Type 2. Flange Size 3. Male or Female
FLANGED UNIONS TONGUE & GROOVE REF: BULLETIN FLUN-03E Socket Weld Threaded Weld Neck Size Part No. List Price Part No. List Price Part No. List Price 1/2" oval U-4S $62 U-4T $70 N/A - 3/4" oval U-6S $62 U-6T $70 N/A - 1" oval U-8SO $62 U-8TO $70 N/A - 1" sq. U-8S $94 U-8T $106 N/A - 1-1/4" sq. U-10S $94 U-10T $106 U-10W $124 1-1/2" sq. U-12S $98 U-12T $112 U-12W $144 2"sq. U-16S $102 U-16T $128 U-16W $162 2-1/2" sq. U-20S $106 N/A - U-20W $209 3" sq. U-24S $136 N/A - U-24W $257 4" sq. U-32S $186 N/A - U-32W $327 5" rd. U-40S $450 N/A - U-40W $635 6" rd. U-48S $580 N/A - U-48W $696 8" rd. U-64S $800 N/A - U-64W $1,055 10" rd. U-80S $1,750 N/A - U-80W $1,824
ORDERING INSTRUCTIONS: 1. Union Connection Type 2. Union Size
H.A. Phillips and Co. 3 LP-090105 SERIES 700H PILOT OPERATED VALVES WITH SERIES 275AP FIXED LEVEL PILOT FLOAT VALVES REF: BULLETIN 700H/270A-03E Flange Conns.. Pilot Model 275AP and 275APF IPS-THD. or Operated 700H Fixed Level Pilot Float add for Socket, Valve add for Valve Pilot Line Valve ODC (copper with w/ Flanged Valve Weld Neck with with Valve Kit Number connectors) Flanges Strainer Only Flanges Cast Ch. Steel Ch. Only (See note) FOR USE WITH AMMONIA (R717) 1 3 700JRH /2", /4"* $668 $851 $615 $57 $552 $1,257 $332 $174 1 700XH 1", 1 /4" $735 $947 $661 $69 $552 $1,257 $332 $174 1 700AXH 1 /2", 2" $1,112 $1,619 $1,020 $82 $552 $1,257 $332 $174 700BXH 3" ** $1,735 $2,744 $1,609 $113 $552 $1,257 $332 $174 FOR USE WITH HALOCARBONS 1 3 700JRHF /2", /4"* (IPS) $668 $851 $615 $57 $627 $1,332 $407 $204 1 3 1 /8", 1 /8" (ODC) $845 $1,028 $615 N/A $627 $1,332 $407 $204 1 700XHF 1", 1 /4" (IPS) $735 $947 $661 $69 $627 $1,332 $407 $204 5 1 /8" (ODC) $941 $1,153 $661 N/A $627 $1,332 $407 $204 1 700AXHF 1 /2", 2" (IPS) $1,112 $1,619 $1,020 $82 $627 $1,332 $407 $204 1 2 /8" (ODC) $1,360 $1,867 $1,020 N/A $627 $1,332 $407 $204 700BXHF 3" (IPS)** $1,735 $2,744 $1,609 $113 $627 $1,332 $407 $204 1 3 /8" (ODC) $2,019 $3,028 $1,609 N/A $627 $1,332 $407 $204 NOTE: Pilot Line Kit available for R717: PLK-700H-A $174 LIST *Available with 1" threaded flanges, add $24 LIST For halocarbons: PLK-700H-F $204 LIST ** Socket weld or weld neck only Kit includes 1/4" globe valve, gauge valve, and pressure gauge
ORDERING INSTRUCTIONS: FOR FACTORY SELECTION ASSISTANCE, ADVISE: For Pilot Valve: For Pilot Float Valve: 1. Refrigerant 1. Pilot Operated Valve Number 1. Orifice Size 2. Upsteram and downstream pressures 2. Orifice Size 2. Chamber requirements 3. Capacity 3. Metering Plug 4. Degrees liquid subcooling 4. Spring 5. Flange Size, Type HIGH SIDE CONTROL PACKAGE 6. Strainer (if required) 700H & 275AP VALVES W/ ACCESSORIES 7. Serial Number, if replacement Control Standard with Pressure Regulator and Package Items* extra Service Valves HIGH SIDE FLOAT VALVES FOR USE WITH AMMONIA (R717) SERIES 270A RC-075 $2,620 $3,164 REF: BULLETIN 700H/270A-03E RC-100 $2,760 $3,304 Valve Valve w/ Chamber Valve RC-125 $2,868 $3,412 Number Cast Steel Only RC-150 $3,663 $4,208 FOR USE WITH AMMONIA (R717) RC-200 $3,795 $4,545 270A $534 $1,239 $314 RC-250 $4,109 $5,131 270AX $917 $1,622 $697 RC-300 $5,397 $6,628 270AY $1,231 $1,936 $1,011 RC-400 $5,714 $7,399 FOR USE WITH HALOCARBONS * Includes (1) 275AP valve and steel chamber with Level Eye, 270AF $534 $1,239 $314 chamber, pilot line kit, 700H valve, service valves, and 270AXF $917 $1,622 $697 hand expansion valve. See engineering bulletin GDRS-03E. 270AYF $1,231 $1,936 $1,011 MOUNTING FLANGE (FOR SERIES 270A) ORDERING INSTRUCTIONS: 2-1/2" SOCKET WELD Same as above for Pilot Valve and Pilot Float Valve.. Flange Number List Price 298A* $81
H.A. Phillips and Co. 4 LP-090105 THREE-WAY VALVES SERIES 3000 REF: 3000N-03E; 3000AN-04E Valve Number List Price 3000N-3/4" $1,487 3000A-1 1/4" $2,064 ORDERING INSTRUCTIONS: 1. Voltage 2. Hertz
CHECK VALVES: IN-LINE DISC TYPE SERIES 600 REF: BULLETIN 600-04E Flange Conn's. add for Valve I.P.S.; THD. Valve w/ Weld Neck Valve Number or Socket Flanges Flanges Only TYPE FORMERLY MANUFACTURED BY WOLF LINDE 1 3 600JR /2", /4", 1" $162 $57 $109 600J 1-¼" $249 $69 $175 600AJ 2" $378 $82 $286 600BJ* 3" $611 $113 $485 600DJ* 4" $939 $140 $753 ALL STEEL CASTINGS 600K* 1", 1-¼" $293 $78 $219 1 600AK* 1 /2", 2" $378 $96 $286 ORDERING INSTRUCTIONS:
1. Valve Number 2. Flange Size, Type * Add suffix 'S' if Heavy Spring is required (e.g. 600AKS).
CHECK VALVES: IN-LINE PISTON TYPE, FLANGED SERIES 700X REF: BULLETIN 700X-03E Flange Conn's I.P.S. Thd. or Socket, add for Valve ODC (Copper Valve w/ Weld Neck Valve Number Connectors) Flanges Flanges Only FOR USE WITH AMMONIA (R717) 1 3 700JRX /2", /4" $431 $57 $378 1 700X 1", 1 /4" $488 $69 $414 1 700AX 1 /2", 2" $725 $82 $633 700BX 3" $1,137 $113 $1,011 FOR USE WITH HALOCARBONS 1 3 700JRXF /2", /4" (IPS) $431 $57 $378 1 3 1 /8", 1 /8" (ODC) $608 N/A $378 1 700XF 1", 1 /4"(IPS) $488 $69 $414 5 1 /8" (ODC) $694 N/A $414 1 700AXF 1 /2", 2" (IPS) $725 $82 $633 1 2 /8" (ODC) $973 N/A $633 700BXF 3" (IPS) $1,137 $113 $1,011 1 3 /8" (ODC) $1,421 N/A $1,011 ORDERING INSTRUCTIONS: 1. Valve Number 3. Flange Size, Type 2. Spring Differential (2, 5, 10, 20, 35, 50, 60, and 70 lbs.) 4. Valve Serial Number, if replacement
H.A. Phillips and Co. 5 LP-090105 CHECK VALVES: PILOT OPERATED (SPRING TO OPEN - GAS POWER TO CLOSE) SERIES 700S REF: BULLETIN 700S-03E Flange Conn's I.P.S.; Thd. or Socket, add for Valve ODC (Copper Valve w/ Weld Neck Valve Number Connectors) Flanges Flanges Only FOR USE WITH AMMONIA (R717) 1 3 700JRS /2", /4" $532 $57 $479 1 700XS 1", 1 /4" $589 $69 $515 1 700AXS 1 /2", 2" $837 $82 $745 700BXS 3" * $1,180 $113 $1,054 FOR USE WITH HALOCARBONS 1 3 700JRSF /2", /4" (IPS) $532 $57 $479 1 3 1 /8", 1 /8" (ODC) $709 N/A $479 1 700XSF 1", 1 /4" (IPS) $589 $69 $515 5 1 /8" (ODC) $795 N/A $515 1 700AXSF 1 /2", 2" (IPS) $837 $82 $745 1 2 /8" (ODC) $1,085 N/A $745 700BXSF 3" (IPS)* $1,180 $113 $1,054 1 3 /8" (ODC) $1,464 N/A $1,054 ORDERING INSTRUCTIONS: *Socket Weld Only 1. Valve Number 2. Flange Size, Type NOTE: No spring requirement necessary to order
CHECK VALVES: THREE WAY (SPRING TO OPEN - GAS FLOW TO ACTUATE) SERIES 700T REF: BULLETIN 700T-03E Flange Conn's I.P.S.; Thd. or Socket, add for Valve ODC (Copper Valve w/ Weld Neck Valve Number Connectors) Flanges Flanges Only FOR USE WITH AMMONIA (R717) 1 700XT 1", 1 /4" $768 $69 $694 1 700AXT 1 /2", 2" $1,224 $82 $1,132 700BXT 3" * $1,862 $113 $1,736 FOR USE WITH HALOCARBONS 1 700XTF 1", 1 /4" (IPS) $768 $69 $694 5 1 /8" (ODC) $974 N/A $694 1 700AXTF 1 /2", 2" (IPS) $1,224 $82 $1,132 1 2 /8" (ODC) $1,472 N/A $1,132 700BXTF 3" (IPS)* $1,862 $113 $1,736 1 3 /8" (ODC) $2,146 N/A $1,736 ORDERING INSTRUCTIONS: *Socket Weld Only 1. Valve Number 2. Flange Size, Type
H.A. Phillips and Co. 6 LP-090105 LOW SIDE FLOAT VALVES FIXED LEVEL - DIRECT FEED (INTERNAL MOUNTING) SERIES 300H REF: BULLETIN 300H-03E Valve Number List Price FOR USE WITH AMMONIA (R717) 300H $598 300HD $612 300HM $615 300HMD $628 300A $793 300AM $820 Note: Valves can be applied as pilots for Series 701 Pilot Operated Valves.
LOW SIDE FLOAT VALVES LOW SIDE FLOAT VALVES FIXED LEVEL - REMOTE FEED FIXED LEVEL - REMOTE FEED (INTERNAL MOUNTING) (EXTERNAL MOUNTING) SERIES 301H SERIES 301E REF: BULLETIN 301H-03E REF: BULLETIN 301E-03E Valve Valve Valve Valve w/ Number List Price Number Only Chamber FOR USE WITH AMMONIA (R717) FOR USE WITH AMMONIA (R717) 301H $1,104 301E $600 $1,146 301A $1,118 301G $718 $1,264 301J $858 $1,404 MOUNTING FLANGES 301K $886 $1,611 (FOR SERIES 300 & 301) FOR USE WITH HALOCARBONS Flange Number List Price 301EF $650 $1,196 399 (3" F.P.T.) $83 301GF $758 $1,304 300WF3 (3" S.W.)* $111 301JF $896 $1,442 * Mill test report can be furnished.
LOW SIDE OIL FEED VALVE HIGH SIDE OIL DRAIN VALVE (FOR ALL REFRIGERANT OILS) (FOR ALL REFRIGERANT OILS) SERIES 275 SERIES 270A REF: BULLETIN OV REF: BULLETIN OV Valve Valve Valve with Cast Valve Valve Valve with Cast Number Only Chamber Number Only Chamber 275AF $309 $529 270A $314 $534 Note: Standard orifice is 3/32" and will operate ORDERING INSTRUCTIONS: with a pressure drop of 250 PSI maximum. 1. Valve Number 2. Orifice Size 3. With or without chamber 4. Mounting flanges #298A (if required) 5. Valve Serial Number, if replacement
H.A. Phillips and Co. 7 LP-090105 LOW SIDE FLOAT VALVES (ADJUSTABLE LEVEL - REMOTE FEED) SERIES 101 REF: BULLETIN 101-04E Valve Valve Valve w/ Number Only Chamber FOR USE WITH AMMONIA (R717) 101 $1,090 $2,308 101A $1,212 $2,824 FOR USE WITH HALOCARBONS 101F $1,170 $2,388 101AF $1,446 $3,058 + See Below PILOT OPERATED VALVE WITH LOW SIDE ADJUSTABLE LEVEL PILOT FLOAT VALVES REF: BULLETIN 701S-03E FOR USE WITH AMMONIA (R717) 701S Pilot Operated Valve 101 Pilot Float Valve Pilot Series Available Connections Operated 701 IPS - Thd. or Socket, with w/ Flanged Valve add for Valve and Orifice with Valve Valve Port Strainer ODC (Copper Connectors) Flanges Strainer Only W.N. Flgs. Size (in.) Chamber Only 3 9 1 3 3 701JRS /8", /16" S701JR /2", /4" * $698 $881 $645 $57 101VP18 - /32" $2,308 $1,090 9 23 1 3 701S /16", /32" S701 1", 1 /4" $765 $977 $691 $69 101VP18 - /32" $2,308 $1,090 7 23 1 1 701AS /8", /32" S701A 1 /2", 2" $1,182 $1,689 $1,090 $82 101VP26 - /8" $3,146 $1,172 1 5 701BS 1 /4" S701B 3" (SW only) $2,305 $3,314 $2,179 $113 101VP26 - /32" $3,146 $1,172 9 3 701BXS 1 /16" S701B 4" (Weld Neck) $2,564 $3,573 $2,424 N/A 101VP26 - /16" $3,146 $1,172 FOR USE WITH HALOCARBONS 701S Pilot Operated Valve 101 Pilot Float Valve Pilot Series Available Connections Operated 701 IPS - THD. or Socket, with w/ Flanged Valve add for Valve and Orifice with Valve Valve Port Strainer ODC (Copper Connectors) Flanges Strainer Only W.N. Flgs. Size (in.) Chamber Only 3 9 1 3 3 701JRSF /8", /16" S701JR /2", /4" (IPS) * $698 $881 $645 $57 101VPF18 - /32" $2,388 $1,170 1 3 1 /8", 1 /8" (ODC) $875 $1,058 $645 N/A $2,388 $1,170 9 23 1 3 701SF /16", /32" S701 1", 1 /4" (IPS) $765 $977 $691 $69 101VPF18 - /32" $2,388 $1,170 5 1 /8" (ODC) $971 $1,183 $691 N/A $2,388 $1,170 7 23 1 1 701ASF /8", /32" S701A 1 /2", 2" (IPS) $1,182 $1,689 $1,090 $82 101VPF26 - /8" $3,186 $1,250 1 2 /8" (ODC) $1,430 $1,937 $1,090 N/A $3,186 $1,250 1 5 701BSF 1 /4" S701B 3" (IPS) SW only $2,305 $3,314 $2,179 $113 101VPF26 - /32" $3,186 $1,250 1 3 /8" (ODC) $2,589 $3,598 $2,179 N/A $3,186 $1,250 9 3 701BXSF 1 /16" S701B 4" (Weld Neck) $2,564 $3,573 $2,424 N/A 101VPF26 - /16" $3,186 $1,250 *Available with 1" threaded flanges, add $24 LIST NOTE: Pilot Line Kit available for R717: PLK-701S-A, $382; for Halocarbons: PLK-701-F, $308 Kits include ¼" FPT Solenoid Valve & Globe Valve, Pressure Gauge and Gauge Valve. ORDERING INSTRUCTIONS: For Pilot Operated Valve: For Pilot Float Valve: FOR FACTORY SELECTION ASSISTANCE, ADVISE: 1. Pilot Operated Valve Number 1. Float Valve Number 1. Refrigerant 2. Orifice Size 2. Orifice Size 2. Upsteram and downstream pressures 3. Metering Plug 3. Left or Right hand + 3. Capacity 4. Spring 4. Chamber requirements 4. Degrees liquid subcooling 5. Flange Size, Type 5. Valve Serial No., if replacement 6. Strainer (if required) 7. Valve Serial No., if replacement For Pilot Kit: 1. Voltage 2. Hertz
+ Left Hand Flow (LHF): Arrow on Valve Body + Right Hand Flow (RHF): Arrow on Valve Body
H.A. Phillips and Co. 8 LP-090105 LOW SIDE FLOAT VALVES FIXED LEVEL - REMOTE FEED (EXTERNAL MOUNTING) SERIES 301E REF: BULLETIN 301E-03E Valve Valve Valve w/ Number Only Chamber FOR USE WITH AMMONIA (R717) 301E $600 $1,146 301G $718 $1,264 301J $858 $1,404 301K $886 $1,611 FOR USE WITH HALOCARBONS 301EF $650 $1,196 301GF $758 $1,304 301JF $896 $1,442
PILOT OPERATED VALVE WITH LOW SIDE FIXED LEVEL PILOT FLOAT VALVE REF: BULLETIN 701S-03E FOR USE WITH AMMONIA (R717) 701S Pilot Operated Valve 301 Pilot Valve Pilot Series Available Connections Pilot Pilot 301 Pilot Valve Operated 701 IPS - THD. or Socket, with w/ Flanged Valve add for Float Valve with Valve Valve Port Strainer ODC (Copper Connectors) Flanges Strainer Only W.N. Flgs. Valve Orifice Chamber Only 3 9 1 3 3 1 701JRS /8", /16" S701JR /2", /4" * $698 $881 $645 $57 301E /32", /8" $1,146 $600 9 23 1 3 1 701S /16", /32" S701 1", 1 /4" $765 $977 $691 $69 301E /32", /8" $1,146 $600 7 23 1 1 701AS /8", /32" S701A 1 /2", 2" $1,182 $1,689 $1,090 $82 301E /8" $1,146 $600 1 5 701BS 1 /4" S701B 3" (SW only) $2,305 $3,314 $2,179 $113 301G /32" $1,264 $718 9 3 701BXS 1 /16" S701B 4" (Weld neck) $2,564 $3,573 $2,424 N/A 301J /16" $1,404 $858 FOR USE WITH HALOCARBONS 701S Pilot Operated Valve 301 Pilot Valve Pilot Series Available Connections Pilot Pilot 301 Pilot Valve Operated 701 IPS - THD. or Socket, with w/ Flanged Valve add for Float Valve with Valve Valve Port Strainer ODC (Copper Connectors) Flanges Strainer Only W.N. Flgs. Valve Orifice Chamber Only 3 9 1 3 3 1 701JRSF /8", /16" S701JR /2", /4" (IPS) * $698 $881 $645 $57 301EF /32", /8" $1,196 $650 1 3 1 /8", 1 /8" (ODC) $875 $1,058 $645 N/A $1,196 $650 9 23 1 3 1 701SF /16", /32" S701 1", 1 /4" (IPS) $765 $977 $691 $69 301EF /32", /8" $1,196 $650 5 1 /8" (ODC) $971 $1,183 $691 N/A $1,196 $650 7 23 1 1 701ASF /8", /32" S701A 1 /2", 2" (IPS) $1,182 $1,689 $1,090 $82 301EF /8" $1,196 $650 1 2 /8" (ODC) $1,430 $1,937 $1,090 N/A $1,196 $650 1 5 701BSF 1 /4" S701B 3" (IPS) SW only $2,305 $3,314 $2,179 $113 301GF /32" $1,304 $758 1 3 /8" (ODC) $2,589 $3,598 $2,179 N/A $1,304 $758 9 3 701BXSF 1 /16" S701B 4" (Weld Neck) $2,564 $3,573 $2,424 N/A 301JF /16" $1,442 $896
*Available with 1" threaded flanges, add $24 LIST NOTE: Pilot Line Kit available for R717: PLK-701S-A, $382; for Halocarbons: PLK-701-F, $308 Kits include Solenoid Valve, Globe Valve, Pressure Gauge and Gauge Valve. ORDERING INSTRUCTIONS: For Pilot Operated Valve: For Pilot Float Valve: FOR FACTORY SELECTION ASSISTANCE, ADVISE: 1. Pilot Operated Valve Number 1. Float Valve Number 1. Refrigerant 2. Orifice Size 2. Orifice Size 2. Upsteram and downstream pressures 3. Metering Plug 3. Chamber requirement 3. Capacity 4. Spring 4. Valve Serial No., 4. Degrees liquid subcooling 5. Flange Size, Type if replacement 6. Strainer (if required) 7. Valve Serial No., if replacement For Pilot Kit: 1. Voltage 2. Hertz
H.A. Phillips and Co. 9 LP-090105 PART KITS & CONTENTS REFERENCE K100 2S & 3S Seat & Needle; 19 Gasket (2); 63 Gasket; 5-2 Spring K101 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-2A Spring K101AB 152B & 153B Seat & Plunger; 19B Gasket; 73 Gasket; 5AB45 Spring K101ABF 152B & 153B Seat & Plunger; 19B Gasket; 73 Gasket; 705A114 Spring K101B 152B & 153B Seat & Plunger; 19B Gasket; 73 Gasket; 705A Spring K101BF 152B & 153B Seat & Plunger; 19B Gasket; 73 Gasket; 705A114 Spring K152K26 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-30A Spring K152KCP 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-30A Spring K152KCPF 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-60L Spring K152KF18 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-30 Spring K152KF26 152KCP Cartridge; 19 Gasket; 63 Gasket; 5-60L Spring K152L 152L Cartridge; 19 Gasket; 63 Gasket; 5-30A Spring (orifice up to 3/8"; 5-4 Spring with 13/32") K152L18 152L Cartridge; 19 Gasket; 63 Gasket; 5-2A Spring K152LCP 152LCP Cartridge; 19 Gasket; 63 Gasket; 5-30A Spring K152LCPF 152LCP Cartridge; 19 Gasket; 63 Gasket; 5-60L Spring K152LF 152L Cartridge; 19 Gasket; 63 Gasket; 5-60L Spring K152LF18 152L Cartridge; 19 Gasket; 63 Gasket; 5-30 Spring K201 252 & 253 Seat & Needle; 73 Gasket; 11 Lever Pin; 205 Spring K210 310 Cartridge; 308 pusher; 725 Gasket K210A 310A Cartridge; 308A Pusher; 725 Gasket K270A1 262 & 403S Seat & Needle; 73 Gasket K270A2 262A & 263A Seat & Needle; 73 Gasket K270AX 262A & 263A Seat & Needle; 73 Gasket K270AY 262AY & 263AY Seat & Needle; 73 Gasket K270AZ 262AZ & 263AZ Seat & Needle; 73 Gasket K275AP1 262 & 403S Seat & Needle; 73 Gasket K275AP2 262A & 263A Seat & Needle; 73 Gasket K280 280 Cartridge; 19 Gasket K280-6 280-6 Cartridge; 19 Gasket K310 310 Cartridge; 308 Pusher; 19 Gasket; 365 Gasket K310A 310A Cartridge; 308A Pusher; 365 Gasket K355 355 Cartridge; 365 Gasket K600 604 Valve Piece; 477-K Spring; 11-222 O-ring; 63 Gasket (2) K600A 604A Valve Piece; 605A4 Spring; 11-229 O-ring; 73 Gasket (2) K600AJ 604AJ Valve Piece, 73 Gasket (2), 605AJ K600B 604B Valve Piece; 326 Gasket; 605B Spring; 326Y Gasket (2) K600BJ 604BJ Valve Piece; 326Y Gasket (2) K600DJ 604DJ Valve Piece; 326YA Gasket (2) K600J 604J Valve Piece, 73 Gasket (2), 605JR K600JR 604JR Valve Piece, 728 Gasket (2), 605JR K700JR 703 Seat Disc; 710 Gasket; 506 Gasket (2) K700 703A Seat Disc; 710 Gasket; 725N Gasket (2) K700A 700-3A Seat Disc; 710A Gasket; 73 Gasket (2) K700B 700-3B Seat Disc; 710B Gasket; 326Y Gasket (2) K700AX 700-3AX Seat Disc; 710A Gasket; 73 Gasket 92) K700BX 700-3BX Seat Disc; 710B Gasket; 326Y Gasket (2) K700X 700-3X Seat Disc; 710 Gasket; 725N Gasket (2) K700AP 73 Gasket (2); 700-4AP Piston; 705A Spring; 710A Gasket K700BP 326Y Gasket (2) 700-4BP Piston; 705BL Spring; 710B Gasket K700XT 11-215 O-Ring; 600D2-2 Check Valve; 700-3X Seat Disc; 705-10L Spring; 710 Gasket; 725N Gasket(2); 5000-131 Retaining Ring K700AXT 11-222 O-Ring; 73 Gasket(2); 600D3-2 Check Valve; 700-3AX Seat Disc; 705A10L Spring; 710A Gasket; 5000-131 Retaining Ring K700BXT 326Y Gasket (2); 600D3XT Check Valve; 700-3BX Seat Disc; 705B15X Spring; 710B Gasket K701JR 703JR Seat Disc; 710JR Gasket; 506 Gasket (2) K701 703 Seat Disc; 710 Gasket; 725N Gasket (2) K701A 703A Seat Disc; 710A Gasket; 73 Gasket (2) K701B 703B Seat Disc; 710B Gasket; 326Y Gasket (2) K1100 1101 Clear Glass; 1103 Rubber Gasket; 1104 Fiber Gasket K1100R 1101R Reflex Glass; 1103 Rubber Gasket; 1104 Fiber Gasket K3000 3003JR & 3003 Seat Discs; 3012JRL & 3012L Push Rods; 3013 & 3013JR Nuts; 3010JR & 3010 Gaskets; 705L Spring K3000PS Spring; plus 3004 & 3004JR Pistons; 3006 & 3006JR Seats. K3000A 3003A & 3003B Seat Discs; 3012A & 3012B Push Rods; 710A & 710B Gaskets; 705AL Spring K3000APS 3003A & 3003B Seat Discs; 3012A & 3012B Push Rods; 710A & 710B Gaskets; 705AL Spring; plus 3004A & 3004B Pistons; 3006A & 3006B Seats.
H.A. Phillips and Co. 10 LP-090105 VALVE PARTS KITS: MISCELLANEOUS KITS: LOW SIDE PILOT OPERATED VALVES Kit Catalog No. For Valve Orifice Size (In.) List Price Kit Catalog No. For Valve Line Size (in.) List Price 1 5 3 1 3 K100 100; 100VP /16 to /32; /16 $259 K701JR 701JR; 701JRS /2; /4 $23 5 5 3 1 K101 101, 101VP18 /64 to /32; /16 $335 K701 701; 701S 1, 1 /4 $29 3 1 1 K101AB 101AB /8; /2 $554 K701A 701A; 701AS 1 /2, 2 $31 3 1 K101ABF 101ABF /8; /2 $540 K701B 701B; 701BS 3 $49 3 1 5 K101B 101B /8; /2; /8 $538 If a replacement spring is required for any of these valves, 3 1 5 K101BF 101BF /8; /2; /8 $538 we must be advised of the Valve Serial Number. 1 5 3 K152K26 101VP-26" chamber /8; /32; /16 $335 5 5 3 K152KF18 101F; 101VPF-18" chamber /64 to /32; /16 $335 KITS: 3-WAY SOLENOID OPERATED VALVES 1 5 3 K152KF26 101VPF-26" chamber /8; /32; /16 $353 Kit Catalog No. For Valve Line Size (in.) * List Price 5 5 3 3 K152KCP 101CP /64 to /32; /16 $335 K3000 3000 & 3000N /4 $113 5 5 3 3 K152KCPF 101CPF /64 to /32; /16 $353 K3000PS 3000 & 3000N /4 $358 1 5 3 13 1 K152L 101A /4; /16; /8; /32 $343 K3000A 3000A 1 /4 $195 1 1 K152L18 101A-18" chamber /4 $344 K3000APS 3000A 1 /4 $674 1 5 3 13 K152LF 101AF /4; /16; /8; /32 $359 *Actual valve IPS. Pipe lines run to the 3-way valves can be as 1 K152LF18 101F-18" chamber /4 $341 indicated, or may be one or two pipe sizes larger. 1 5 3 K152LCP 101CP /4; /16; /8 $473 1 5 3 K152LCPF 101CPF /4; /16; /8 $487 KITS: 3-WAY CHECK VALVES 1 5 3 K201 201 /16; /64; /32 $255 Kit Catalog No. For Valve Line Size (in.) List Price 3 9 1 K210 210 /32 to /64 $197 K700XT 700XT 1, 1 /4 $284 5 3 7 1 K210A 210A /32; /16; /32 $232 K700AXT 700AXT 1 /2, 2 $377 1 5 3 K270A1 270A, 270AF, 275AF /16; /64; /32 $171 K700BXT 700BXT 3 $982 1 3 K270A2 270A, 270AF, 275AF /8; /16 $199 13 K270AX 270AX /64 $199 KITS: LEVEL EYE® 3 K270AY 270AY /8 $640 Kit Catalog No. For Level Eye® List Price
K270AZ 270AZ; 270AZA; 0.234 $254 K1100 Clear Level Eye® $54
270AZAZ K1100R Reflex Level Eye® $47 1 5 3 K275AP1 275AP; 275APF /16; /64; /32 $171 1 3 K275AP2 275AP; 275APF /8; /16 $199 5 5 K280 225; 225B; 250; 250CB; /64 to /32 $379 KITS: INTERRUPTING VALVES 250P; 250L; 250VPF; 251CP Kit Catalog No. For Valve Line Size (in.) List Price 7 9 5 1 K280-6 250VP (R717 only) /64; /64; /32 $379 K700AP 700AP 1 /2, 2 $237 5 3 7 1 9 K310 300; 300H; 300HM; 300J; /64; /32; /64; /8; /64 $197 K700BP 700BP 3 $508 300P; 300Y; 301E 5 3 7 K310A 300A; 300AM; /32; /16; /32 $232 300YA; 301G 3 7 9 K355 301; 301H; 301J; /16; /32; /32 $530 301K; 301D; 301A *USE THE 5/64" Orifice Only in a 301E Valve
KITS: CHECK VALVES (DISC TYPE) ORDERING INSTRUCTIONS: Kit Catalog No. For Valve Line Size (In.) List Price 1. Orifice size 1 K600 600; 600K 1, 1 /4 $99 2. Valve Serial Number 1 K600A 600A; 600AK 1 /2, 2 $140 3. Load in Tons K600AJ 600AJ 2 $107 4. Refrigerant K600BJ 600BJ 3 $250 K600DJ 600DJ 4 $410 NOTES: K600J 600J 1¼ , 1½ $63 1. Ordering instruction data required for the float controls only. K 600JR 600JR ½, ¾, 1 $63 2. Failure to furnish at least one of the above KITS: CHECK VALVES (PISTON TYPE) requirements will mean a delay in filling the order, Kit Catalog No. For Valve Line Size (In.) List Price as our factory will have to seek the information 1 3 K700JR 700JR; 700JRS; 700JRX; /2; /4 $20 before a shipment can be made. 700JRH; 700JRXH 1 K700 700; 700S; 700H 1, 1 /4 $33 3. If a replacement spring is required for any of the valves we 1 K700A 700A; 700AS; 700AH 1 /2, 2 $125 must be advised of complete Valve Number, such as 700X-5. K700B 700B; 700BS; 700BH 3 $125 1 K700X 700X; 700XS; 700XH 1, 1 /4 $30 1 K700AX 700AX; 700AXS; 700AXH 1 /2, 2 $33 K700BX 700BX; 700BXS; 700BXH 3 $66
H.A. Phillips and Co. 11 LP-090105 REPLACEMENT PARTS PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE 2A&3A SEAT & NEEDLE $328.00 68-12" FLOAT $513.00 262AZ&263AZ SEAT BSHG. & NEEDLE $254.00 2A&403A SEAT & NEEDLE $294.00 68F-8" FLOAT $605.00 263A&402A SEAT BSHG. & NEEDLE $324.00 2S&3S SEAT & NEEDLE $248.00 68F-12" FLOAT $607.00 265C SPRING $7.00 2S&403S SEAT & NEEDLE $196.00 69 FLOAT $1,394.00 265D-S SPRING $11.00 4 ADJUSTING NUT $30.00 73 GASKET $5.00 265E SPRING $5.00 4B ADJUSTING NUT $30.00 73L GASKET $5.00 267 FLOAT $212.00 5-2 SPRING $7.00 75H O-RING $11.00 267AZAZ FLOAT $384.00 5-2A SPRING $13.00 75K O-RING $6.00 267F FLOAT $212.00 5-4 SPRING $6.00 79 FLOAT $154.00 267Y FLOAT $212.00 5-30A SPRING $5.00 84 PIPE PLUG $4.00 267YA FLOAT $212.00 5-60L SPRING $23.00 87 LOCK NUT $2.00 270M ADJUSTING NUT $18.00 5-61 SPRING $6.00 87S LOCK NUT $7.00 272AY PUSHER $102.00 5AB45 SPRING $23.00 88 LOCK NUT $3.00 272M PUSHER $69.00 6 SPRING CONE $20.00 90P PIPE PLUG $13.00 273AY GLAND $117.00 6T SPRING CONE $21.00 107 O-RING $3.00 273M GLAND $78.00 7 STEM $58.00 108 O-RING $3.00 275 FLOAT ASS'Y $72.00 7B STEM $37.00 151B SEAT BUSHING $72.00 276 LEVER $20.00 7DPW STEM $205.00 152B&153B SEAT & PLUNGER $524.00 277 LINK $52.00 8 GLAND $18.00 152KCP CARTRIDGE $330.00 278 LINK $52.00 8B GLAND $31.00 152L CARTRIDGE $334.00 280 CARTRIDGE $379.00 9 BONNET $63.00 152LCP CARTRIDGE $467.00 284 FLOAT ROD $18.00 9B BONNET $160.00 204 ADJUSTING NUT -- 285A SPRING $4.00 9BF BONNET $353.00 204E ADJUSTING NUT $23.00 289 GASKET $4.00 9F BONNET $87.00 211-1/4" ROLL PIN $2.00 290CB STOP -- 10B LEVER $157.00 211-3/8" ROLL PIN $2.00 290S STOP $10.00 10CP LEVER $125.00 211-1/2" ROLL PIN $2.00 291 CAP $47.00 10CPS LEVER $145.00 211-5/8" ROLL PIN $2.00 292 GASKET $5.00 11 LEVER PIN $5.00 213A FLOAT BLOCK $98.00 293 GLAND $7.00 11&SPACER LEVER PIN $15.00 215CB FLOAT BLOCK $80.00 294 STEM $54.00 11B LEVER PIN $7.00 220 FLOAT $175.00 296 SCREW $5.00 11S LEVER PIN $11.00 220A FLOAT $71.00 297-12 FLOAT $220.00 11-210/11-215 O-RING $5.00 220P FLOAT $169.00 302D DISC $20.00 11-216/11-229 O-RING $7.00 220PF FLOAT $270.00 307 BOSS $76.00 12 PIPE PLUG $4.00 220PS FLOAT $440.00 307A BOSS $78.00 13 BUSHING $109.00 220PSF FLOAT $550.00 307ACB BOSS $93.00 14 PLUG $31.00 224 LOCK NUT $4.00 307B BOSS $80.00 14CB PLUG $41.00 227 CAP SCREW $2.00 307E BOSS $84.00 15 SPRING $7.00 228 STOP $6.00 307G BOSS $84.00 16 SPRING CONE $16.00 228A STOP $7.00 307H BOSS $147.00 18 SCREEN $42.00 230 FLOAT BLOCK $54.00 307J BOSS $84.00 19 GASKET $2.00 230A FLOAT BLOCK $30.00 308 PUSHER $35.00 19B GASKET $2.00 230P FLOAT BLOCK $93.00 308A PUSHER $35.00 19C GASKET -- 230PS FLOAT BLOCK $93.00 308ACB PUSHER $177.00 55 LOCK WASHER $2.00 230X FLOAT BLOCK $116.00 308H PUSHER $72.00 55A LOCK WASHER $2.00 230Z FLOAT BLOCK $39.00 309 GASKET $2.00 56 COTTER PIN $2.00 231 LINK $5.00 310 CARTRIDGE $162.00 63 GASKET $3.00 243 FLOAT ROD $18.00 310A CARTRIDGE $199.00 63W GASKET $3.00 243CB FLOAT ROD $14.00 310AX CARTRIDGE $237.00 67-8" FLOAT $236.00 244 FLOAT ROD $14.00 313 FLOAT ROD $39.00 67-16" FLOAT $303.00 252&253 SEAT BSHG. & NEEDLE $246.00 313A FLOAT ROD $26.00 67F-8" FLOAT $328.00 262&403S SEAT BSHG. & NEEDLE $167.00 313AM FLOAT ROD $26.00 67F-16" FLOAT $374.00 262A&263A SEAT BSHG. & NEEDLE $197.00 313CP FLOAT ROD $95.00 68-8" FLOAT $374.00 262AY&263AY SEAT BSHG. & NEEDLE $637.00 313HM FLOAT ROD $32.00
H.A. Phillips and Co. 12 LP-090105 REPLACEMENT PARTS PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE 314 CAM NEEDLE $30.00 365 GASKET $3.00 604J VALVE PIECE $58.00 314A CAM NEEDLE $42.00 369 ADJUSTING SCREW $15.00 604JR VALVE PIECE $40.00 314E CAM NEEDLE $15.00 370 FLOAT $304.00 605A1 SPRING $12.00 314J CAM NEEDLE $42.00 370A FLOAT $315.00 605A4 SPRING $11.00 315 FLOAT BLOCK $54.00 370CB-22 FLOAT $263.00 605AJ SPRING $14.00 315ACB FLOAT BLOCK $222.00 370M FLOAT $285.00 605B SPRING $19.00 315P FLOAT BLOCK $54.00 370MF FLOAT $376.00 605BJ SPRING $16.00 315PA FLOAT BLOCK $47.00 377 STEM $38.00 605BJS SPRING $16.00 315PM FLOAT BLOCK $63.00 411 LEVER PIN $5.00 605DJ SPRING $30.00 315R FLOAT BLOCK $42.00 411&SPACERS LEVER PIN $15.00 605DJS SPRING $58.00 315WA FLOAT BLOCK $79.00 413 FLOAT ROD $35.00 605JR SPRING $12.00 315WCB FLOAT BLOCK $48.00 413S FLOAT ROD $37.00 606B SPRING $20.00 316 SET SCREW $6.00 431 LINK $5.00 608AJ BACK PLATE RING $28.00 317J NEEDLE $32.00 431AY LINK $18.00 608BJ BACK PLATE RING $34.00 318P STOP $24.00 476 STOP $20.00 608DJ BACK PLATE RING $52.00 319P ADJUSTING PIECE $7.00 477K SPRING $7.00 608J BACK PLATE RING $23.00 321 FLOAT $98.00 477-1 SPRING $8.00 608JR BACK PLATE RING $15.00 321M FLOAT $98.00 506 GASKET $3.00 610B RETAINER $49.00 321MF FLOAT $220.00 507 SCREEN $69.00 700-2 BONNET $61.00 321WCB FLOAT $167.00 515 SPRING $5.00 700-2A BONNET $109.00 322 LOCK NUT $2.00 516 SPRING CONE $13.00 700-2AT BONNET $160.00 324 LOCK NUT $2.00 517 SCREEN $92.00 700-2B BONNET $207.00 324S LOCK NUT $7.00 558 SCREEN $76.00 700-3A SEAT DISC $143.00 325 CAP SCREW $3.00 569 SCREEN $166.00 700-3AX SEAT DISC $21.00 325WCB CAP SCREW $3.00 577 CAP SCREW $3.00 700-3B SEAT DISC $109.00 326 GASKET $6.00 580 SCREEN $175.00 700-3BX SEAT DISC $50.00 326KZ GASKET $12.00 594 OBSOLETE -- 700-3X SEAT DISC $15.00 326Y GASKET $6.00 600D2-2 CHECK VALVE $248.00 700-4AX PISTON $88.00 326YA GASKET $11.00 600D3-2 CHECK VALVE $294.00 700-4AXH PISTON $200.00 327P STEM $57.00 600D3XT CHECK VALVE $767.00 700-4AXS PISTON $152.00 328E GLAND $49.00 601AJ SNAP RING $13.00 700-4AXT PISTON $153.00 329 STOP $10.00 601B STEM $230.00 700-4BP PISTON $422.00 331-15 FLOAT $456.00 601BJ SNAP RING $16.00 700-4BX PISTON $187.00 331-15F FLOAT $456.00 601DJ SNAP RING $26.00 700-4BXH PISTON $247.00 333 PIPE PLUG $4.00 601J SNAP RING $11.00 700-4BXS PISTON $205.00 334CB CONNECTOR $42.00 601JR SNAP RING $7.00 700-4JRH PISTON $135.00 343 FLOAT ROD $24.00 602A BACK PLATE $124.00 700-4JRSS PISTON $208.00 343A FLOAT ROD $11.00 602AK GUIDE PIECE $96.00 700-4JRX PISTON $82.00 343AZ FLOAT ROD $26.00 602B BACK PLATE $138.00 700-4X PISTON $61.00 343CP FLOAT ROD $42.00 602BJ BACK PLATE $138.00 700-4XH PISTON $124.00 343D FLOAT ROD $26.00 602DJ BACK PLATE $183.00 700-4XS PISTON $124.00 343H FLOAT ROD $26.00 602K GUIDE PIECE $83.00 700-4XT PISTON $179.00 343M FLOAT ROD $10.00 603AJ TEFLON RING $30.00 700-7 FLUSH PLUG $24.00 343MS FLOAT ROD $49.00 603BJ TEFLON RING $42.00 700-7AQ FLUSH PLUG $89.00 343WA FLOAT ROD $30.00 603DJ TEFLON RING $63.00 700-7AX FLUSH PLUG $38.00 343WCB FLOAT ROD $10.00 603J TEFLON RING $24.00 700-7AXH METERING PLUG $104.00 355 CARTRIDGE $533.00 603JR TEFLON RING $14.00 700-7AXS FLUSH PLUG $47.00 356 SPRING $4.00 604 VALVE PIECE $83.00 700-7AXT FLUSH PLUG $54.00 357 ADJUSTING SCREW $10.00 604A VALVE PIECE $119.00 700-7BX FLUSH PLUG $129.00 358 PUSHER $40.00 604AJ VALVE PIECE $98.00 700-7BXH METERING PLUG $165.00 359 LOCK NUT $2.00 604B VALVE PIECE $577.00 700-7BXS FLUSH PLUG $129.00 363 PLUG $39.00 604BJ VALVE PIECE $254.00 700-7H METERING PLUG -- 364 GASKET $11.00 604DJ VALVE PIECE $414.00 700-7JR FLUSH PLUG $21.00
H.A. Phillips and Co. 13 LP-090105 REPLACEMENT PARTS PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE 700-7JRH METERING PLUG $80.00 705BL SPRING $69.00 1100CH HOUSING $85.00 700-7JRS FLUSH PLUG $68.00 705H SPRING $8.00 1100H HOUSING $72.00 700-7Q FLUSH PLUG $70.00 705L SPRING $5.00 1100LH HOUSING $111.00 700-7S FLUSH PLUG $70.00 706-9/16" SEAT $34.00 1100SH HOUSING $144.00 700-7T FLUSH PLUG $59.00 706-23/32" SEAT $34.00 1100TH HOUSING $117.00 702 BONNET $251.00 706A-23/32" SEAT $47.00 1100VH HOUSING $200.00 702A BONNET $333.00 706A-7/8" SEAT $47.00 1101 LENS - CLEAR $52.00 702AP BONNET $604.00 706B SEAT $102.00 1101R LENS - REFLEX $42.00 702AS BONNET $160.00 706JR-3/8" SEAT $34.00 1102 RETAINER OBSOLETE 702BP BONNET $997.00 706JR-9/16" SEAT $34.00 1102SH RETAINER SS HEX $72.00 702BS BONNET $262.00 706JRP SEAT $39.00 1103 GASKET $4.00 702BT BONNET $262.00 707-9/16" METERING PLUG $52.00 1103T GASKET - TEFLON $39.00 702JR BONNET $251.00 707-23/32" METERING PLUG $52.00 1104 GASKET $2.00 702JRS BONNET $77.00 707A-23/32" METERING PLUG $66.00 1105/1106 FROST SHIELD $38.00 702S BONNET $77.00 707A-7/8" METERING PLUG $66.00 1105L/1106L FROST SHIELD $49.00 702T BONNET $109.00 707B METERING PLUG $130.00 1106 O-RING $2.00 703 SEAT DISC $14.00 707JR-3/8" METERING PLUG $63.00 1358 GASKET $6.00 703A SEAT DISC $20.00 707JR-9/16" METERING PLUG $63.00 1458 GASKET $14.00 703B SEAT DISC $35.00 708A SPRING CONE $20.00 1558 GASKET -- 703JR SEAT DISC $14.00 708AT SPRING CONE $21.00 2026SL NOZZLE $138.00 704 PISTON $116.00 708B SPRING CONE $36.00 2027SL THROAT $102.00 704A PISTON $164.00 708BT SPRING CONE $42.00 2028SL GASKET $36.00 704B PISTON $439.00 708BXT SPRING CONE $69.00 2030SL NUT $37.00 704JR PISTON $115.00 708DPW SPRING CONE $637.00 2046SL NOZZLE $89.00 705-1L SPRING $13.00 710 GASKET $3.00 2047SL THROAT $54.00 705-5L SPRING $13.00 710A GASKET $4.00 2048 NUT $59.00 705-10L SPRING $13.00 710B GASKET $6.00 2049 GASKET $3.00 705-20L SPRING $13.00 710JR GASKET $4.00 2076W FRONT PIECE $14.00 705-35L SPRING $13.00 711 STEM $36.00 2077W THROAT $71.00 705-35R SPRING $13.00 711A STEM $49.00 2101W FRONT PIECE $48.00 705-45L USE 705-50L $13.00 711AXT STEM $54.00 2106SL NOZZLE $75.00 705-50L SPRING $13.00 711B STEM $70.00 2107SL THROAT $77.00 705-60L SPRING $13.00 711BT STEM $85.00 2107W THROAT $75.00 705-60R SPRING $13.00 711X STEM $33.00 2108SL NUT $58.00 705-70L SPRING $13.00 711XS STEM $34.00 2110SL CONNECTOR $39.00 705-90L SPRING $13.00 711XT STEM $49.00 2111 GASKET $2.00 705A SPRING $7.00 714 SEAL CAP $63.00 2126 NOZZLE $248.00 705A-2L SPRING $24.00 714B SEAL CAP $107.00 2127WA THROAT $143.00 705A-10L SPRING $24.00 718 CAP SCREW $2.00 2222 NOZZLE $314.00 705A-20L SPRING $24.00 720 GASKET $4.00 2223W THROAT $474.00 705A-30L SPRING $24.00 720B GASKET $4.00 3002 BONNET $99.00 705A-60L SPRING $24.00 725 GASKET $4.00 3002A BONNET $130.00 705A-110L SPRING $24.00 725N GASKET $6.00 3002B BONNET $234.00 705A-114 SPRING $7.00 728 GASKET $2.00 3002JR BONNET $104.00 705AL SPRING $13.00 752AQ SLEEVE $306.00 3003 SEAT DISC $18.00 705B-3L SPRING $69.00 752Q SLEEVE $267.00 3003A SEAT DISC $24.00 705B-3X SPRING $79.00 753Q SEAT DISC $36.00 3003B SEAT DISC $35.00 705B-10L SPRING $69.00 754AQ PISTON $275.00 3003JR SEAT DISC $16.00 705B-15X SPRING $79.00 754Q PISTON $270.00 3004 PISTON $85.00 705B-30L SPRING $69.00 775 PACKING RING $6.00 3004A PISTON $143.00 705B-60L SPRING $69.00 776 RETAINER $6.00 3004B PISTON $207.00 705B-100L SPRING $69.00 777BN PACKING RING $10.00 3004JR PISTON $85.00 705B-160L SPRING $69.00 1100AH HOUSING $102.00 3006 SEAT $36.00
H.A. Phillips and Co. 14 LP-090105 REPLACEMENT PARTS PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE PART NO. DESCRIPTION LIST PRICE 3006A SEAT $58.00 3012L PUSH ROD $32.00 5108-137 SNAP RING $5.00 3006B SEAT $72.00 3013 NUT $3.00 5108-177 SNAP RING $8.00 3006JR SEAT $35.00 3013JR NUT $3.00 U4-1 NUT $41.00 3010 GASKET $4.00 3014 TUBE ASS'Y $67.00 U4-1S NUT $41.00 3010JR GASKET $4.00 3014A TUBE ASS'Y $67.00 U4-3S RETAINER $31.00 3012A PUSH ROD $51.00 3014TF TUBE FITTING $29.00 U4-4 GASKET $2.00 3012B PUSH ROD $58.00 5000-131 SNAP RING $5.00 U6-1S NUT $52.00 3012JRL PUSH ROD $32.00 5000-175 SNAP RING $7.00 U6-4 GASKET $3.00
RETURN MATERIAL AUTHORIZATION POLICY H. A. Phillips & Co. will review any customer’s request to return product(s) for credit or repair. Customers must obtain Return Material Authorization prior to returning any product(s).
Please follow these steps: 1. Contact H. A. Phillips & Co. for a Return Material Authorization (RMA) number. 2. Wait for H. A. Phillips & Co. to issue you a RMA form. 3. Indicate “REPAIR AND RETURN” or “RETURN FOR CREDIT” on the factory supplied RMA form. 4. Include the RMA form with the product(s) when packaged for shipment. 5. Write the RMA number on the outside of the package. 6. Ship the product(s) prepaid UPS to the factory address indicated on this bulletin (unless other arrangements have been approved by H. A. Phillips & Co.). 7. RMA numbers are only valid for 30 days following their date of issue.
When a credit is requested, H.A. Phillips & Co. will inspect the returned condition of product(s) prior to making a credit decision. A minimum restocking charge calculated as 15% of the purchase price or $25.00, whichever is greater, will apply unless the returned product(s) are defective in material or workmanship according the warranty provisions of H.A. Phillips & Co.’s Terms & Conditions of Sale.
H. A. Phillips & Co. will repair valves with a Valve Serial Number that indicates the valve was manufactured less than ten (10) years ago. Please check with the factory to verify age. Repair parts for older valves are usually available. H. A. Phillips & Co. will repair a valve at 85% of current total cost for a new valve, contingent on re-use of the valve body and float ball (if applicable). H. A. Phillips & Co. standard warranty will apply to a repaired valve.
LIMITED PRODUCT WARRANTY Seller warrants that its products (“Product(s)”) will meet the specifications set forth in its catalog from time to time, unless the Buyer is notified otherwise prior to delivery. Seller will, without charge, repair or provide a replacement for any of the Products which prove to be defective in materials or workmanship within one (1) year from the date of first use or eighteen months from date of shipment, whichever first occurs (“Warranty Period”).
If, within the Warranty Period, Buyer discovers a defect in materials or workmanship which interferes with the operation of any Product, Buyer must promptly notify Seller, in writing, of such defect. Seller's sole obligation to Buyer under this Warranty is to repair and correct any defect in material or workmanship, or provide a replacement Product to Buyer. Seller's decision with respect to the applicability of this Warranty to any defect shall be final and conclusive. Seller reserves the right to require Buyer, at Buyer's sole cost and expense, to return any defective Product, including any alterations made thereto, F.O.B. Seller's factory in Illinois.
Seller does not warrant against abrasion, corrosion or erosion. Seller shall not be liable to Buyer or to any other person for work done or repairs made, to remedy any defect, by any person who is not an authorized representative of Seller, unless Seller's written consent is first obtained by Buyer. This Warranty does not apply to, and is rendered null and void by, any Product which, after leaving Seller's manufacturing plant: (a) is repaired or altered without Seller's prior written approval; (b) is the subject of improper storage, installation or operation; (c) is the subject of intentional or negligent misuse, misapplication, neglect or accident; or (d) is not used, repaired or altered in accordance with Seller's written instructions.
Except for Products manufactured by Danfoss A/S and sold by Seller, this Warranty does not apply to any products which are purchased and resold by Seller and which bear the original manufacturer’s name or nameplate on the product. Any such products shall be warranted only to the extent of the express warranty, if any, provided by the manufacturer of such products or parts.
Seller expressly reserves the right to declare this Warranty null and void upon Buyer's failure to make full and timely payments with respect to any Products purchased by Buyer from Seller, in which event all of Seller's obligations, and Buyer's rights, under this Warranty, shall immediately terminate.
SELLER DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTIES ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE. SELLER SHALL NOT BE LIABLE TO BUYER OR ANY OTHER PARTY UNDER THIS WARRANTY FOR DIRECT, SPECIAL, CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES OF ANY KIND.
H.A. Phillips and Co. 15 LP-090105 TERMS AND CONDITIONS OF SALE
1. Acceptance of Orders. All sales made by H.A. Phillips & Co. ("Seller") of its products ("Products") are contingent upon the Buyer's acceptance of these Terms and Conditions of Sale ("Terms"). All orders placed by Buyer are subject to acceptance by an authorized representative of Seller at Seller's principal offices in Illinois. Any terms and conditions contained in Buyer's purchase order which are inconsistent with, or in addition to, these Terms, shall not be binding upon Seller unless, and until, Seller agrees to any such terms and conditions, in writing, signed by an authorized representative of Seller. These Terms cannot be modified or waived except by written agreement executed by an authorized representative of Seller at Seller's principal offices in Illinois.
2. Prices. Prices stated in Seller's price list are subject to change without notice. Prices listed in Seller's quotations or acknowledgements, or which are quoted verbally by Seller, shall remain firm for sixty (60) days unless Seller notifies Buyer to the contrary.
3. Payment Terms. Provided that Buyer has established a credit account with Seller, then payment terms for all Products are net cash (U.S. Dollars) thirty (30) days from date of invoice; otherwise payment is due upon delivery. These payment terms are independent of, and are not contingent upon, the time and manner in which Buyer receives payment from any of its customers. A finance charge of 1.5% per month (annual percentage rate of 18%) will be charged on all past due amounts. In the event suit or other proceeding is brought by Seller for the recovery of the purchase price, or any unpaid portion thereof, or for any breach of any of these Terms, Buyer shall pay to Seller, in addition to any damages provided by law, all collection or enforcement costs incurred by Seller, including reasonable attorney fees, and Seller shall be entitled to have such costs and fees included as part of any judgment obtained by Seller.
4. Taxes. Prices set forth in Seller's price list, or quoted by Seller, do not include applicable federal, state or local taxes or other charges. Buyer shall pay all such taxes and other charges, together with any penalties and interest, and file any returns with respect thereto, upon receipt of any invoice from Seller. In lieu of payment of any such taxes, Buyer shall provide Seller with an acceptable tax exemption certificate. Buyer agrees to indemnify Seller, and hold Seller harmless, and upon request, defend Seller, against any and all assessments, demands, causes of action, suits, or claims of any nature, whatsoever, including costs and attorney fees, incurred by Seller in connection with the payment or nonpayment of any applicable taxes, for the filing or failure to file any returns, which are required of Buyer by law or pursuant to this paragraph 4.
5. Delivery and Shipment Dates. Any dates and schedules for delivery of Products stated in Seller's quotation or acknowledgement represent Seller's best estimate made at the time of such quotation or acknowledgement, and are not binding upon Seller. Seller reserves the right to make deliveries in installments and to separately invoice Buyer for each installment. Seller shall have no liability, whatsoever, to Buyer, Buyer's customers, or any third party for direct, liquidated, consequential, incidental or indirect damages, losses or expenses resulting from delays in shipment of any Products or installments of Products.
6. Freight. All shipments are F.O.B., Seller's factory in Illinois. If Buyer specifies shipment by “Pre-paid Freight”, freight charges plus 10% (15% for same-day shipments), but not less than $5.00 in any case, will be added to Buyer’s invoice.
7. Security. Seller shall have, and Buyer hereby grants to Seller, a security interest in all Products sold to Buyer until full and complete payment has been received by Seller from Buyer for the Products. Buyer agrees to do all acts necessary to permit Seller to perfect and maintain such security interest.
8. Returns. No returns of special or custom-made Products ordered by Buyer will be accepted by Seller. Seller will review Buyer’s request to return standard Products for credit or repair. Prior to returning any standard Product, Buyer must obtain Return Material Authorization from Seller. A copy of Seller’s Return Material Authorization Policy is available upon request.
9. Indemnification. Buyer shall indemnify and defend Seller, and hold Seller harmless, from and against any and all claims, demands, causes of action, loss, or damage, including reasonable attorney fees, arising from or relating to the improper use or installation of any Product or any acts or omissions of Buyer.
10. Limitation of Liability. IN NO EVENT SHALL SELLER HAVE ANY LIABILITY, WHATSOEVER, TO BUYER, BUYER'S CUSTOMERS, OR ANY THIRD PARTY FOR SPECIAL, LIQUIDATED, CONSEQUENTIAL, INCIDENTAL OR INDIRECT LOSS OR DAMAGE OF ANY KIND, ARISING OUT OF, OR ALLEGED TO ARISE OUT OF, ANY PRODUCTS OR SELLER'S SALE THEREOF. SELLER’S LIABILITY FOR WARRANTY CLAIMS IS SOLELY AS SET FORTH IN SELLER’S LIMITED PRODUCT WARRANTY AS PROVIDED IN PARAGRAPH 11 OF THESE TERMS.
11. Warranty. Seller warrants its Products in accordance with Seller’s Limited Product Warranty, a copy of which Buyer acknowledges receipt with these Terms, and which is in corporated herein by reference. SELLER DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTIES ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE. SELLER SHALL NOT BE LIABLE TO BUYER OR ANY OTHER PARTY UNDER THIS WARRANTY FOR DIRECT, SPECIAL, CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES OF ANY KIND.
12. Cancellation. No order for Products may be cancelled by Buyer without the prior written consent of Seller. In the event Seller consents to cancellation of any order placed by Buyer, Buyer agrees to reimburse Seller for any expenses incurred in developing, engineering, or manufacturing any Products to Buyer's specifications and for any Products shipped to Buyer prior to Sel ler’s receipt of any notice of cancellation.
13. Choice of Law. All agreements between Seller and Buyer with respect to any Products, or the performance thereof, shall be construed in accordance with, and governed by, the laws of the State of Illinois.
14. Jurisdiction. Seller and Buyer hereby acknowledge and agree that this sale is entered into in Kane County, Illinois, and hereby further agree to submit themselves to the jurisdiction of the courts of Kane County, Illinois, with respect to any claim, controversy or dispute, whether in law or in equity, which arises from, or is alleged to arise from, or is in any way related to, this sale.
15. Waiver. Waiver by Seller of Buyer’s breach of any of these Terms shall not be construed as a waiver of any other breach.
16. Severability. In the event any provision of these Terms shall be declared invalid or unenforceable by a court of competent jurisdiction, the remaining provisions of these Terms shall remain in full force and effect.
H.A. Phillips and Co. 16 LP-090105