HP Designjet Z3100 Photo Printer Series Using Your Printer

Total Page:16

File Type:pdf, Size:1020Kb

HP Designjet Z3100 Photo Printer Series Using Your Printer HP Designjet Z3100 Photo Printer Series Using your printer HP Designjet Z3100 Photo printer series Using your printer Legal notices Trademarks © 2006 Hewlett-Packard Development Adobe®, Acrobat®, Adobe Photoshop®, and Company, L.P. Adobe® PostScript® 3™ are trademarks of Adobe Systems Incorporated. The information contained herein is subject to change without notice. Corel® is a trademark or registered trademark of Corel Corporation or Corel The only warranties for HP Products and Corporation Limited. services are set forth in the express warranty statement accompanying such products and Energy Star® is a U.S. registered mark of the services. Nothing herein should be United States Environmental Protection construed as constituting an additional Agency. warranty. HP shall not be liable for technical or editorial errors or omissions contained Microsoft® and Windows® are U.S. herein. registered trademarks of Microsoft Corporation. PANTONE® is Pantone, Inc.'s check- standard trademark for color. Table of contents 1 Introduction Safety precautions ................................................................................................................................ 2 HP Start-Up Kit ..................................................................................................................................... 2 Using this guide .................................................................................................................................... 2 Introduction .......................................................................................................................... 2 Use and maintenance .......................................................................................................... 3 Troubleshooting ................................................................................................................... 3 Support, accessories, and specifications ............................................................................. 3 Glossary ............................................................................................................................... 3 Index .................................................................................................................................... 3 Warnings and Cautions ....................................................................................................... 3 The printer's main features ................................................................................................................... 4 The printer's main components ............................................................................................................ 4 Front view ............................................................................................................................ 5 Rear view ............................................................................................................................. 5 The front panel ..................................................................................................................................... 6 Printer software .................................................................................................................................... 7 The printer's internal prints ................................................................................................................... 7 2 Installing the software Choose which connection method to use ........................................................................................... 10 Connect to a network (Windows) ....................................................................................................... 10 Connect directly to a computer (Windows) ......................................................................................... 11 Printer sharing considerations ........................................................................................... 12 Uninstall the printer software (Windows) ............................................................................................ 12 Connect to a network (Mac OS) ......................................................................................................... 12 Bonjour/Rendezvous connection ....................................................................................... 12 TCP/IP connection ............................................................................................................. 14 Connect directly to a computer (Mac OS) .......................................................................................... 15 Sharing the printer ............................................................................................................. 16 Uninstall the printer software (Mac OS) ............................................................................................. 16 3 Personalizing the printer Turn printer on and off ........................................................................................................................ 18 Change the language of the front-panel display ................................................................................. 19 Access HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS) .......................................... 19 Access the Embedded Web Server ................................................................................................... 19 Change the language of HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS) ................ 20 Change the language of the Embedded Web Server ......................................................................... 20 Change the sleep mode setting .......................................................................................................... 20 Turn the buzzer on and off ................................................................................................................. 21 Change the front-panel display contrast ............................................................................................. 21 ENWW iii Change the units of measurement ..................................................................................................... 21 Configure network settings ................................................................................................................. 21 Change the graphic language setting ................................................................................................. 22 4 Paper handling General advice ................................................................................................................................... 24 Choose which spindle to use .............................................................................................................. 24 Load a roll onto the spindle ................................................................................................................ 25 Load a roll into the printer ................................................................................................................... 27 Easy loading procedure ..................................................................................................... 27 Paper menu procedure ...................................................................................................... 29 Unload a roll ....................................................................................................................................... 30 Unload paper key procedure with paper on the roll ........................................................... 31 Paper menu procedure with paper on the roll .................................................................... 31 Roll out of paper procedure ............................................................................................... 31 Load a single sheet ............................................................................................................................ 31 Easy loading procedure ..................................................................................................... 32 Paper menu procedure ...................................................................................................... 33 Unload a single sheet ......................................................................................................................... 35 Unload paper key procedure ............................................................................................. 35 Paper menu procedure ...................................................................................................... 35 View information about the paper ....................................................................................................... 36 Paper profiles ..................................................................................................................................... 36 Add a custom paper type ................................................................................................................... 37 Maintain paper .................................................................................................................................... 38 Change the drying time ...................................................................................................................... 38 Turn the automatic cutter on and off .................................................................................................. 38 Feed
Recommended publications
  • Patchtool Help
    PatchTool Help Version 7.1 PatchTool Help © 2007-2020 Danny Pascale All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher. Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document. Published in November 2020 in Montreal / Quebec / Canada. PatchTool Help -2- Version 7.1 Table of Contents 1. INTRODUCTION ................................................................................................................................ 7 1.1 WHAT YOU CAN DO WITH PATCHTOOL .................................................................................................................... 7 1.2 ADDITIONAL TECHNICAL INFORMATION ................................................................................................................. 9 2. THE PATCHTOOL WINDOWS AND DIALOGS ...........................................................................
    [Show full text]
  • New Opportunities and Challenges with Fifth Color Units
    DPP2005: IS&T's International Conference on Digital Production Printing and Industrial Applications New Opportunities and Challenges with Fifth Color Units Norbert Limburg NexPress GmbH. Kiel, Germany Abstract Varnishing: Spot Color Ink “Without” Color With clear ink (without pigments) it is possible to In this session new opportunities for high quality printing create a varnishing effect. This can be done on the entire with a fifth color unit will be shown. The difference print area or as a spot effect e.g. to create “watermarks” between “Spot Color Printing” and “Gamut Expansion etc.. Some printing systems offer as well high gloss for this Printing” with extension colors as well as the coating will “Varnish” (e.g. NexPress). give a new dimension to digital print. The presentation will For spot application a special color channel must be focus on technical aspects in the workflow: applied in the file. • How to use 5-Color ICC profiles in workflow Varnish or clear ink may change the color appearance. • Impact on simulation of brand colors Therefore it is recommended to use special ICC profiles • How to run test prints created for the exact printing conditions with clear ink to • Handling of different color definition (color-spaces) avoid drift. and data types inside the workflow and PDF/ PS interpreter. Higher Abrasion-Resistance by Intelligent Masking With Clear Ink: Introduction The electro photographic process creates a relief on the printed result, depending on the amount of ink in each A fifth color unit can be used in general for two different area, because the ink is not merging into the paper.
    [Show full text]
  • Rip Technology, Colorimetry and Color Management in Digital Textile Printing
    TEXTIL PLUS FACHARTIKEL RIP TECHNOLOGY, COLORIMETRY AND COLOR MANAGEMENT IN DIGITAL TEXTILE PRINTING Software and workflow topics are often underrepresented in the machine-dominated textile industry, but they have a critical influence on quality and profitability. Professional color management, for example, enables technology-agnostic printing of textiles or networked printing across remote locations. ■ ■ ■ Inkjet printing on textiles has many advantages: there is no need to make printing forms or screens, which makes the process ideal for smaller runs and enables the economic production of personalized and individualized prints. Ink- jet-based processes are also preferred for printing photo- OLIVER LUEDTKE graphic images. However, there are also some challenges Dipl.-Ing. to be mastered: on the one hand, ink is absorbed by fabrics, Chief Marketing Officer so the textile or fabric must first be pre-treated. The differ- ColorGATE ent types of fibers, dyeing techniques and finishings of the DE-30171 Hannover base material provide a wealth of changing parameters as [email protected] well. Still, customers have high expectations of the print qual- ity: despite the relatively uneven surface, they expect a de- The RIP: the data preparation hub tailed and well-resolved print with a large color gamut. In All these and more tasks are fulfilled by the RIP and color direct-to-garment printing, the substrate is often a dark or management solution. In the closer sense of the word, a RIP black garment. In such cases, the use of white ink is a basic («Raster Image Processor») is a software or hardware compo- requirement for the printing process, because the CMYK nent that converts print data into the output format of the inks used are not opaque but translucent.
    [Show full text]
  • Xespotcolor.Pdf
    The xespotcolor package: Spot Colors for X LE ATEX&LATEX Απόστολος Συρόπουλος (Apostolos Syropoulos) Xanthi, Greece [email protected] 2016/03/22 updated 2021/03/01 Abstract A spot color is one that is printed with its own ink. Typically, printers use spot colors in the production of books or other printed material. The spotcolor package by Jens Elstner is a first attempt to introduce the use of spot colors with pdfLaTeX. The xespotcolor package is a reimplementation of this package so to be usable with X LE ATEX and LATEX+dvipdfmx. As such, it has the same user interface and the same capabilities. 1 Introduction Using spot colors with X LE ATEX is very important since most printers use spot colors in the production of books and magazines. The spotcolor package makes it possible to use spot colors with pdfLATEX but it cannot be used with X LE ATEX or LATEX. In what follows I first describe how to translate certain pdfTEX code snippets into X TE EX or TEX+dvipdfmx and then I present the code of the package. Thus one can view this text as a short tutorial on how to portE pdfT X code to X TE EX or TEX+dvipdfmx as well as a description of the functionality of the xespotcolor package. Since the package is a port of a pdfTEX package, it has the same functionality as the original package. 2 Porting pdfTEX code to X TE EX or TEX+dvipdfmx Translating pdfTEX code, which adds PDF code to the output file, to X TE EX or TEX+dvipdfmx is not a straightforward exercise since pdfTEX provides primitive commands that directly access and modify the structure of the resulting PDF file.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 8.451.495 B2 Mestha Et Al
    USOO845 1495B2 (12) United States Patent (10) Patent No.: US 8.451.495 B2 Mestha et al. (45) Date of Patent: May 28, 2013 (54) COLOR INCONSTANCY GUIDE FOR SPOT U.S. Appl. No. 12/533,542, filed Jul. 31, 2009, Gil et al. Wyble, David R. and Berns, Roy S. A Critical Review of Spectral COLOR PRINT APPLICATIONS Models Applied to Binary Color Printing, May 1, 1999, John Wiley & Sons, Inc., Rochester, NY. USA. (75) Inventors: Lalit Keshav Mestha, Fairport, NY Ohno, Yoshi, CIE Fundamentals for Color Measurements, IS&T (US); Yonghui Zhao, Penfield, NY NIP16 Conference, Oct. 16, 2000, National Institute of Standards and (US); Yao Rong Wang, Webster, NY Technology, Gaithersburg, MD, USA. Susstrunk, Sabine and Holm, Jack and Finlayson, Graham D., Chro (US) matic Adaptation Performance of Different RGB Sensors, IS&T/ SPIE Electronic Imaging, SPIE vol. 4300, Jan. 2001, Swiss Federal (73) Assignee: Xerox Corporation, Norwalk, CT (US) Institute of Technology(EPFL), Lausanne, Switzerland. Kheng, Leow Wee, Color Spaces and Color-Difference Equations, (*) Notice: Subject to any disclaimer, the term of this Feb. 19, 2002, Department of Computer Science, National University patent is extended or adjusted under 35 of Singapore, Singapore. U.S.C. 154(b) by 785 days. Sharma, Gaurav and Wu, Wencheng and Dalal, Edul N. The CIEDE2000 Color-Difference Formula: Implementation Notes, (21) Appl. No.: 12/645,832 Supplementary Test Data, and Mathematical Observations, Feb. 9, 2004, ECE Department University of Rochester, Rochester, NY. (22) Filed: Dec. 23, 2009 USA. (65) Prior Publication Data (Continued) US 2011 FO149311 A1 Jun. 23, 2011 Primary Examiner — Barbara Reinier (74) Attorney, Agent, or Firm — Philip E.
    [Show full text]
  • The Proofing Standard for the Flexo and Packaging Markets
    The proofing standard for the flexo and packaging markets The product portfolio in flexo and packaging printing breaks and moiré effects. In this way, the individual is characterized – in comparison with standardized tone reproduction curves and dot gains of a wide offset and illustration gravure printing – by far greater variety of presses, or the occasionally coarse screens substrate and spot color diversity. Consequently, the used in flexo printing, can already be reproduced in demands on a digital proofing system are also higher the proof. in the packaging sector. GMG sets new standards in this field with its GMG FlexoProof o5 software, which { Flexibility due to simple workflow integration is specifically geared to the needs of the flexo and The GMG FlexoProof solution offers a high level of packaging markets. integration in numerous common workflows, such as Nexus™ from EskoArtwork. The separations of Target groups the imagesetter RIP are adopted automatically, color- • Prepress businesses and printers in the packaging interpreted, and realized on the proof printer. After and label sector. printing the proof, GMG FlexoProof automatically makes the data available to the workflow again for Your advantages at a glance further processing. { Production reliability due to screen control The DotProof® module in GMG FlexoProof processes { ROOM concept saves time and money not only industry-standard data formats, but also A true ROOM concept (Rip Once, Output Many) is the original 1-bit data of the imagesetter RIP. These realized if the original imagesetter data are used. As a data are color-profiled, retaining the original screen result, internal processes are optimized and synergistic information, and output in contract-proof quality.
    [Show full text]
  • Impresora Fotográfica HP Designjet Z2100 Uso De Su Impresora Impresora Fotográfica HP Designjet Serie Z2100
    Impresora fotográfica HP Designjet Z2100 Uso de su impresora Impresora fotográfica HP Designjet serie Z2100 Uso de su impresora Avisos legales Marcas comerciales © 2006 Hewlett-Packard Development Adobe®, Acrobat®, Adobe Photoshop® y Company, L.P. Adobe® PostScript® 3™ son marcas comerciales de Adobe Systems La información contenida en este Incorporated. documento está sujeta a cambios sin previo aviso. Corel® es una marca comercial o una marca registrada de Corel Corporation o Corel Las únicas garantías de los productos y Corporation Limited. servicios de HP se establecen en la declaración de garantía explícita adjunta a Energy Star® es una marca registrada dichos productos y servicios. Nada de lo estadounidense de la Agencia de Protección expuesto en este documento debe del Medio Ambiente de Estados Unidos. considerarse como una garantía adicional. HP no se hace responsable de los errores de Microsoft® y Windows® son marcas editorial o técnicos u omisiones que registradas estadounidenses de Microsoft contenga esta guía. Corporation. PANTONE® es una marca comercial estándar de especificación de colores de Pantone, Inc. Tabla de contenidos 1 Introducción Precauciones de seguridad .................................................................................................................. 2 Kit de iniciación de HP ......................................................................................................................... 2 Uso de esta guía .................................................................................................................................
    [Show full text]
  • Extending LATEX's Color Facilities: the Xcolor Package
    Extending LATEX’s color facilities: the xcolor package Dr. Uwe Kern v2.11 (2007/01/21) ∗ Abstract xcolor provides easy driver-independent access to several kinds of colors, tints, shades, tones, and mixes of arbitrary colors by means of color expres- sions like \color{red!50!green!20!blue}. It allows to select a document- wide target color model and offers tools for automatic color schemes, conver- sion between twelve color models, alternating table row colors, color blending and masking, color separation, and color wheel calculations. Contents 1 Introduction 4 1.1 Purposeofthispackage ........................ 4 1.2 Color tints, shades, tones, and complements . 5 1.3 Colormodels .............................. 5 1.4 Color wheels and color harmony . 5 2 The User Interface 7 2.1 Preparation............................... 7 2.1.1 Package installation . 7 2.1.2 Package options . 7 2.1.3 Executing additional initialisation commands . 8 2.2 Colormodels .............................. 8 2.2.1 Supported color models . 8 2.2.2 Substituting individual color models . 11 2.2.3 Changing the target color model within a document . 11 2.3 Arguments and terminology . 12 2.3.1 Additional remarks and restrictions on arguments . 12 2.3.2 Meaning of standard color expressions . 15 2.3.3 Meaning of extended color expressions . 16 2.3.4 Color functions . 16 2.4 Predefined colors . 17 2.4.1 Colors that are always available . 17 ∗This package can be downloaded from CTAN/macros/latex/contrib/xcolor/. There is also an xcolor homepage: www.ukern.de/tex/xcolor.html. Please send error reports and suggestions for improvements to the author: [email protected].
    [Show full text]
  • Color Controller C-80, Powered by Creo Color Server Technology, for Pro C900
    User Guide English Color Controller C-80, Powered by Creo Color Server Technology, for Pro C900 Version 1.0 731-01701A-EN Copyright Eastman Kodak, 2009. All rights reserved. This document is also distributed in Portable Document Format (PDF). You may reproduce the document from the PDF file for internal use. Copies produced from the PDF file must be reproduced in whole. Trademarks The Creo wordmark, the Creo logo, and the names of Creo branded products and services referred to in this document are trademarks of Eastman Kodak Company. Adobe, Acrobat, Adobe Illustrator, Distiller, Photoshop, PostScript, and PageMaker are registered trademarks of Adobe Systems Incorporated. Apple, AppleShare, AppleTalk, iMac, ImageWriter, LaserWriter, Mac OS, Power Macintosh, and TrueType are registered trademarks of Apple Computer, Inc. Macintosh is a trademark of Apple Computer, Inc., registered in the U.S.A. and other countries. PANTONE, Hexachrome, PANTONE Hexachrome, PANTONE Goe, and PANTONE MATCHING SYSTEM are the property of Pantone, Inc. PEARL, PEARLsetter, PEARLhdp, PEARLdry, and PEARLgold are registered trademarks of Presstek, Inc. FCC compliance Creo branded equipment referred to in this document complies with the requirements in part 15 of the FCC Rules for a Class A digital device. Operation of the Creo branded equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference. Equipment recycling In the European Union, this symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. Contact your local Print On-Demand Solutions representative or refer to http://www.kodak.com/go/recycle for additional information on the collection and recovery programs available for this product.
    [Show full text]
  • ORIS COLOR TUNER // WEB Web-Based Soft- and Hardcopy Proofing in One Package
    ORIS COLOR TUNER // WEB Web-based soft- and hardcopy proofing in one package Inkjet Printer Client A Prints Database Client B Measurement Client C Communicating Color Worldwide ORIS COLOR TUNER // WEB: The world´s first proofing system providing web-based soft- and hardcopy proofing in one package! Key Features View – Print – Certify in one application Independent and iterative spot color matching Soft- and hardcopy proofs matched to the same Create and optimize spot colors visually via honeycomb standards – FOGRA, GRACoL, SWOP, 3DAP etc. layout Easy to operate wizard-based user interface – no color Spot color correction via CxF/X-4 data embedded in PDF files expertise required Support for Hexachrome/n-channel profiles Seamless client/server architecture Continuous and halftone dot proofing option for Simple remote job submission, pre-flight and control color-accurate screened proofs Patented iterative color management gives you accurate Accepts all major digital file formats and reproducible results Intelligent scatter proof function Easy management of global remote proofing with latest Easy creation of media profiles generation of inkjet printers Uses the printer manufacturer’s original screening 30-day fully functional ORIS CERTIFIED // WEB included and resolutions Printer setup wizard Ready for the new industry standards as FOGRA51 Selective color correction and profile smoothing (coated) and FOGRA52 (uncoated) Support for all Pantone, Pantone Live (via Esko Color Engine), Esko and HKS libraries www.cgs-oris.com ORIS COLOR TUNER //
    [Show full text]
  • Advanced Proofing – Spot Colours
    Copyright © 2007 Digital Dots Ltd • This article is reproduced with permission Advanced proofing – spot colours While accurate proofing always offers challenges of one sort or other, conventional four-colour proofing in newsprint or commer- cial print has been mastered for some years now by a large range of proofing systems. But printing and proofing spot colours still offers a challenge for most printers and vendors of proofing sys- tems. Digital Dots has conducted a test of proofing systems, where the test form contains the normal four process colours, plus six selected spot colours. There are several challenging issues when printing and proofing spot col- ours. One obvious one is that most colour printers are only loaded with a set of CMYK inks, so it may not be possible to reproduce a certain spot colour exactly. Nor is it enough to choose a colour printer with an as- large-as-possible colour gamut as the colour printer needs a RIP that can render colours in an efficient and accurate way. Also, the RIP needs to be used properly. In a recent proofing test ar- ranged by IPA, the US association of graphic solutions providers, proof- ing systems vendors were able to produce proofs with an accuracy which averaged Delta E (also written as ∆E) 1.1. But a selection of users who produced the same four-colour proofs could only manage an average ∆E of 2.2. So, although many proofing systems can produce very accurate proofs for four-colour printing, they need to be set up properly by well- trained operators.
    [Show full text]
  • GMG Spotcolor Editor Quick Start Guide for Spot Color Proofing (EN) Imprint
    GMG SpotColor Editor Quick Start Guide for Spot Color Proofing (EN) Imprint © 2012-2014 GMG GmbH & Co. KG GMG GmbH & Co. KG Moempelgarder Weg 10 72072 Tuebingen Germany This documentation and described products are subject to change without notice. GMG GmbH & Co. KG makes no guaranty as to the accuracy of any and all information and procedures described in this documentation. To the maximum extent permitted by applicable law, in no event shall GMG GmbH & Co. KG or the author be liable for any special, incidental, direct, indirect, or consequential damages whatsoever (including, without limitation, injuries, damages for data loss, loss of business profits, business interruption, loss of business information, or any other pecuniary loss) arising out of the use of or inability to use the software or this documentation or the provision of or failure to provide Support Services, even if GMG GmbH & Co. KG has been advised of the possibility of such damages. Reprinting and copying, as well as other duplication including excerpts of this document, are prohibited without the written permission of GMG GmbH & Co. KG. This also applies to electronic copies. GMG, the GMG Logo, and GMG product names and logos are either registered trademarks or trademarks owned by GMG GmbH & Co. KG. All brand names and trademarks are the property of the respective owner and are expressly recognized as such. If brand names, trademarks, or other material are used without the permission of the respective owners, we request appropriate notification. We will immediately stop use of said items. PANTONE® colors displayed in the software application or in the user documentation may not match PANTONE identified standards.
    [Show full text]