& FASHION >hub

What does the Digital Fabric Printer do? D I G I T A L The digital fabric printer uses pigment inks for a dot-on demand print. The F A B R I C printer has a maximum width of 150cm. What fabrics can I print on ? P R I N T E R At the Hub we provide a stock service of fabrics which are available for you to print on.

Is there a minimum print amount? Yes, there is a minimum print of 1 metre. P R I C I N G

100% , 140cm wide: What files types are best for printing? $31 per metre We recommend providing all artwork as a TIFF and 300ppi. Your file needs to be set up the same size it is to be printed. 100% cotton voile, 112cm wide: $28 per metre What colour mode should my file be ? Files should be set up as an Adobe RGB1998 colour mode. You select this & Lycra , 140cm wide: step when you are creating a new document in either illustrator or Photo- $58 per metre shop.

100% silk crepe de chine 140cm: $48 per metre Is there a cost for file preparation? If you require extra assistance in file set-up it will be charged at $95 per hour. Cotton & Lycra 125cm: $35 per metre If you are new to digital printing we recommend you attend our evening Digital Print Get Started workshop. This takes you through basics of digital Set up & strike-off is $30 for all print and file set-up in the course of one evening. fabrics. Then each fabric is priced per meter beyond that. How long should I allow for printing? 1 - 2 weeks. All print orders need to be dropped off by Thursday and can be collected the following Thursday (depending on the quantity).

(03) 9425 5673 textileandfashionhub

[email protected] www.kangan.edu.au/textile-and-fashion-hub