PRJ1102 EVALENE® PRJ1102 Random Copolymer Polypropylene Resin Is Designed for High Transparency Injection Molding Applications
Total Page：16
File Type：pdf, Size：1020Kb
PRODUCT DATA SHEET Random Copolymer Polypropylene PRJ1102 EVALENE® PRJ1102 Random Copolymer Polypropylene resin is designed for high transparency injection molding applications. EVALENE® PRJ1102 is formulated with a high performance clarifier and anti-static additive, and is specifically intended for a broad range of injection molding applications requiring excellent product aesthetics including high transparency. This resin is designed to deliver improved cycle times and lower processing temperatures compared to other PP random copolymer injection molding grades. FEATURES TYPICAL APPLICATIONS • Medium Flow • Transparent Containers • High transparency and Housewares • High impact strength • Bottles • Low warpage • Small Container Rigid • High surface gloss Packaging • Meets Philippine FDA food contact requirements • Halal-certifi ed is a trademark owned and used by G/F Robinsons Cybergate Center Tower 1 Barangay Simlong JG Summit Petrochemical Corporation (JGSPC), EDSA cor. Pioneer Street, Batangas City, 4200 Mandaluyong City 1550 Philippines the largest manufacturer of polyolefi ns in the Philippines. Philippines JGSPC is a member of JG SUMMIT HOLDINGS, INC., and is a proud ISO 9001:2008 and ISO 14001:2004 certifi ed company. Sales: (+632) 230 5000 PRODUCT DATA SHEET Product Properties Property Test Condition Standard Typical Value Unit Melt Flow 230°C / 2.16 kg ASTM D1238 11 g/10 min Tensile Strength at Yield* 50 mm/min ASTM D638 29 MPa Elongation at Yield* 50 mm/min ASTM D638 24 % Tensile Strength at Break* 50 mm/min ASTM D638 24 MPa Elongation at Break* 50 mm/min ASTM D638 1183 % Tensile Modulus* 1% Scant, 5 mm/min ASTM D638 1453 MPa Flexural Modulus 1% Secant 1.3 mm/min ASTM D790A 935 MPa Notched Izod Impact Strength 23°C ASTM D256 24 J/m Rockwell Hardness R scale ASTM D785 88 Heat Defl ection Temperature 0.455 MPa ASTM D648 83 °C *Tensile properties tested using Type I injection molded specimens Typical Processing Conditions: Extruder temperature: 200 °C Mold temperature: 20 - 40 °C EVALENE® PRJ1102 provides superior transparency and enhanced aesthetic appeal to packaging containers with signifi cantly reduced haze combined with improved surface gloss. The good combination of mechanical strength with excellent aesthetics benefi ts converters with ease of change over from other clarifi ed PP grades in the market. Tensile Strength 80% at Break 60% Heat Deflection 40% Elongation at Yield Temperature 20% % Haze, 1.25 mm 0% EVALENE® Other Random Other Random Standard Homo PRJ1102 PP PP PP (Resin A) (Resin B) Notched Izod Elongation at Break Impact Strength 160 120 ° 80 Flexural Modulus Tensile Modulus Gloss,45 40 0 EVALENE® PRJ1102 Other Clarified PP EVALENE® Other Random Other Random Standard Homo PRJ1102 PP PP PP (Resin A) (Resin B) Disclaimer: Information provided herein is given for general purposes only. It is the customer’s sole responsibility to test the product and any information provided herein to determine JGSPC ©2015 09 V.1B whether they are suitable for the customer’s purposes. JGSPC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS. Customers are strongly advised to review the applicable Material Safety Data Sheet before handling or using the product described herein. Find out more about us at: www.jgspetrochem.com.