Sample Test Name: Cabinetmaking

(These items were developed by teachers for the Technical Skills Assessment. Below is a sample item for each program standard.)

Question 1 of 12

What is REQUIRED for an accurate cost estimate of a woodworking project?

A) MDF and fasteners B) Equipment and floor space C) Drawer slides and finish D) Materials and labor

Question 2 of 12

How often should fire extinguishers be certified?

A) 6 months B) Annually C) Quarterly D) 3 years

Question 3 of 12

Which hardwood is the darkest?

A) Birch B) Oak C) Walnut D) Cherry

Arizona Department of Education / Career and Technical Education 1/4 Cabinetmaking Sample Test

Question 4 of 12

What air compressor maintenance should be performed weekly?

A) Check for air leaks B) Tighten the fittings C) Change the oil/water D) Drain the air/water

Question 5 of 12

What is used PRIMARILY to square, bevel, chamfer, and flatten wood?

A) Jointer B) Router C) Wide-belt sander D) Shaper

Question 6 of 12

Which direction does the y-axis move on a CNC machine?

A) Up and down B) Forward and backwards C) Left and right D) Circular

Question 7 of 12

What kind of marking indicates hidden lines on a floor plan?

A) Thin double lines B) Thick double lines C) Thin dotted lines D) Thick dashed lines

Arizona Department of Education / Career and Technical Education 2/4 Cabinetmaking Sample Test

Question 8 of 12

In addition to a panel saw, what can be used to cut a 4 x 8 panel material to size?

A) Jigsaw B) Hand saw C) Miter saw D) Table saw

Question 9 of 12

Where are dovetail joints COMMONLY found?

A) Drawers B) Table C) Doors D) Chairs

Question 10 of 12

Which type of hinge is concealed when the door is closed?

A) Pivot B) Lip C) European D) Butt

Question 11 of 12

What is the BEST way to trim linear edges of veneer?

A) Utility knife B) Veneer saw C) Belt sander D) Laminate trim router

Arizona Department of Education / Career and Technical Education 3/4 Cabinetmaking Sample Test

Question 12 of 12

After 100 grit, what is the NEXT finest grit?

A) 150 B) 120 C) 80 D) 180

Arizona Department of Education / Career and Technical Education 4/4 Cabinetmaking Sample Test Cabinetmaking Sample Test Answer Key

Question Answer 1. D 2. B 3. C 4. D 5. A 6. B 7. C 8. D 9. A 10. C 11. D 12. B

Arizona Department of Education / Career and Technical Education Cabinetmaking Sample Test