Abaco Club BHM CO. LTD On Winding Bay - Utilities and Site Development Client: Peter De Savery
Services Provided
• Managing Disruption to Clients and Neighbors • Consideration of local environment • Flexible Scheduling
Benefits to Customer
• Enhanced Customer experience
• Works carried out to avoid disruption
• Single Point Of Contact For Client Team
Background The Abacos, a string of quiet Bahamian islands, are located 186 miles east of Palm Beach, Florida and just to the northwest of Eleuthera
The Abaco Club was created as a tropical paradise where club members and homeowners could escape the rigors of everyday life and relax, with walks on the beach, golf events, and lazy days spent under the warm Bahamas sun.
Project Description BHM were appointed for the construction Works on this Private Development for Peter DeSavary, works Included the Infrastructure Works and Road Construction to Enable the Development of this Subdivision and Golf Course. BHM Installed the Water Distribution and low Pressure Sewerage Collection Force main System together with the Chip and Sand Seal Paving. The project included: • Earthworks and Grading • Water Distribution System • Chip and Sand seal Paving • Access roads
BHM branding - February www.bhm.construction 2014 Albany Cottage BHM CO. LTD Construction of Albany Cottage C45 Client: Albany Developer Ltd.
Services Provided • Turnkey Design and Build service • Construction management • Design management and coordination of all interfaces.
Benefits to Customer • High quality finish achieved throughout • Built within an existing development with minimal impact • Completed within agreed timescale.
Background Within the existing luxury resort community of Albany, BHM were commissioned to construct new beach cottage properties. Albany is a 585 acre resort boasting a marina, golf course, equestrian and fitness center amongst many other facilities. The properties feature tradltlonal Bahamlan architecture and offer spectacular views of the marina and golf course.
Project Description BHM was appointed by Albany Developer Ltd for the construction of 5 bedroom beach club cottages on their prestigious Albany Development in Nassau.The scope of works for the cottages included: • Blockwork structure with render finish • Architectural glazing • Installation of high end specification interior finishes and appliances • Cabana and Private swimming pool • Decorative paving and landscaplng.
BHM branding - February www.bhm.construction 2014 Arawak Cay Port BHM CO. LTD New port facility at Arawak Cay Client: Arawak Port Development Ltd.
Services Provided • Risk management • Value engineering • Design management of surfacing materials • Asphalt and concrete design • Consideration of local environment and ensuring no contamination issues
Benefits to Customer • Safe and secure working on the Client’s facility • On-site impact kept to a minimum • Works carried out to suit other ongoing improvement works • Integrated team working with the Port Owners • Ability to accommodate design changes during construction • Innovative solutions
Background The relocation of the port was required to ease heavy Bay Street container traffic and allows shipping companies to operate from one location at the mouth of the Nassau Harbour. Arawak Cay marine works and new apron will allow the port to operate as a recognised international container port.
The 40-acre development is the home for local shipping companies and a distribution facility for international freight to the whole of the Bahamas.
Project Description BHM was appointed by Arawak Port Development Limited for the construction of the landside facilities for the new Port on Arawak Cay to service the island of New Providence and a vital link for goods transfer to the Family Islands. The works included:- • Bulk earthworks and preparation for terminal areas • Asphalt and concrete surfacing to Container stacking areas • All associated ancillary works • Construction of access and service roadways • Utilities, drainage, lighting, and landscaping for terminal areas • Demolition of two earthen water reservoirs and ancillary works • Electrical and telecom works.
BHM branding - February www.bhm.construction 2014 Design and manufacture of asphalt BHM CO. LTD
Services Provided • Design and manufacture of Hot Mix Asphalt (HMA) and Warm Mix Asphalt (WMA) to all international specifications (ISO 9001 accredited) • Selection of superior quality constituents following inspection of potential quarries by our Quality Assurance / Quality Control (QA/QC) team, assisting suppliers in producing materials to specified criteria, rigorous sampling & testing at source and on arrival at mixing plants • Implementation of sampling and testing regime MOBILE ASPHALT MIXING PLANT of all constituents and of finished product throughout production (ISO 17025 accredited for Civil Engineering Materials Testing) • Mobile Materials Testing laboratories allow on-site QA/QC • Modification of bitumen to various Performance Grades (PG) using Reactive Polymers, Latex, Wax Modifiers to comply with Client’s specifications for Elastic performance and Stiffness.
Benefits to Customer • BHM understands the Client’s technical requirements and is able to manufacture to the required Standard and Specification demanded • BHM employs a technical team with many years’ experience of design and manufacturing bituminous materials on many continents to a variety of Standards and Specifications • BHM has three asphalt mixing plants two of which are fully mobile • Mobile plants can be shipped to required location and set-up in the most suitable position for the works • Erection and calibration of the Mobile plant is completed within six days of arrival at the location.
IN-HOUSE QA/QC (ISO accredited)
DESK-STUDY MIX DESIGN
BHM branding - February www.bhm.construction 2014 Atlantis / Paradise Island BHM CO. LTD Infrastructure and road works Client: Sun International/ Kerzner International
Services Provided
• Value engineering • Risk management • Construction management • Traffic management • Ashpalt and concrete Design
Benefits to Customer
• Single point of contact for client team • Works planned to minimize impact on road users and tourism • High standards of quality and safety management • In house plant and materials • Employment of skilled local workforce
Background BHM’s initial contract with the Paradise Island Tourism and Development Agency was for a 2 year, $16million contract to rehabilitate the infrastructure and road network for the Atlantis resort on Paradise Island. In a busy, tourist environment it was essential that works were carried with minimal impact on the general public. Our successful delivery on this project led to BHM undertaking all major road works and infrastructure on Paradise Island, with contract values totalling $31million to date.
Project Description Our scope of works included:
• Traffic management design, notices and provisions of signage to ensure works carried out safely and with minimum disruption
• New water services, sewerage and drainage
• Electrical distribution
• Street lighting
• New roads and resurfacing
• Thermoplastic road markings
BHM branding - February www.bhm.construction 2014 Baha Mar Resort BHM CO. LTD Major Infrastructure works Client: China State Construction America (CCA)
Services Provided
• Risk management • Value engineering • Ashpalt and concrete Design • Consideration of local environment
Benefits to Customer
• Works carried out to avoid disruption to existing hotels and residents. • Integrated team working closely with the China State Construction America and the Baha Mar team.
• Working in close collaboration with third party contractors on site.
• Ability to react promptly to design changes.
Background The Baha Mar Resort (also known as The Bahamian Riviera) is located on the world famous Cable Beach in Nassau. The resort will feature four elite hotels (SLS Lux, Rosewood, Grand Hyatt & the Bahamar Casino Hotel) and a state-of-the-art convention facility, including 2,000-seat performing Arts Centre and Art Gallery. Amenities will include the 18-hole, 72-par championship Jack Nicklaus Signature Golf Course.
Project Description BHM as part of a joint venture were contracted by China State Construction America for the construction of the major infrastructure works on one of the largest resort developments in the Caribbean. Scope of works included:
• Installation of utility services, potable water, storm water, drainage, sanitary sewer, reclaim water, gas, electrical distribution, external lighting. • New car parking areas for the resort, employees, and patrons; • New roadways into the resort. • Hard landscaping, decorative sidewalks, waterside place and Hotel Porte Cochère’s • Tennis Court construction • Injection and cooling well construction • The Design and Build of main entry lake and showcase fountain water feature and all associated MEP works including lake filtration and water flow and return systems • Three pedestrian bridges
BHM branding - February www.bhm.construction 2014 Baillou Hill Road BHM CO. LTD Ground works, Infrastructure and Roadways Client: Ministry for Public Works and Transport Bahamas
Services Provided • Risk management • Value engineering • Construction management • Phased traffic management
Benefits to Customer • Value engineering input • Minimal disruption to road users, local business and general public • High quality of works achieved • Safe environment for road users and public maintained
Background BHM were awarded this scheme following on from the successful completion of the Harrold Road project. BHM assisted the client in reaching their budget by offering a number of value engineering savings, including the use of swales in lieu of a gravity drainage system. The implementation of a phased traffic management solution within a highly trafficked, urban area was of significant importance to the delivery of the project.
Project Description BHM were employed by the Ministry for Public Works and Transport to carry out the following scope of works:
• Site clearance and bulk earthworks • Stabilisation of base material • New utility ducts • New road drainage system • Road lighting and electrical work • Kerbing & sidewalks • Realignment of roadway and roundabouts • Rehabilitation of Harrold Road Roundabout to allow for new filter lanes and increased traffic capacity • Hard and soft landscaping • White lining
BHM branding - February www.bhm.construction 2014 Bakers Bay BHM CO. LTD Site development Client: Discovery Land
Services Provided • Consideration of local environment • Construction management • Working with client • Flexible scheduling
Benefits to Customer
• Close working relationship with other contractors on site
• High standards of quality and safety management
• In house quality assurance and testing
Background The Baker’s Bay Golf and Country Club is a private, property owners only club community perched on the northern 600 acres of Great Guana Cay in the Abaco family islands of the Bahamas, located just 190 miles off the southern coast of Florida. Nestled between the turquoise Sea of Abaco and the Atlantic Ocean, the community features picturesque home sites, luxurious island cottages and colorful beach bungalows that blend in perfectly with the rich cultural heritage of the Abaco Islands.
Project Description BHM were awarded the works on this prestigious contract for Discovery Land, for the Bulk Earthworks and Paving on Phase One of the Project. Existing Limerock being harvested as the Base Material for the new roads with excavated dredged material being utilized for the New Embankments, Property Lots and for the Shaping of Drainage Swales. Existing Mangroves and Vegetation are required to be preserved to maintain the natural eco system, with silt fencing protecting the areas, the works also calls for the demucking and surcharging of areas where the works cross swamp areas. BHM’s mobile ADM Asphalt plant was mobilized to the Cay to complete the HMA Asphalt, the design of which was for a free flowing roadway through mangroves and over purpose built islands. The project included: • Protection of Existing Environment • Bulk Earthworks and Grading • HMA Roads
BHM branding - February www.bhm.construction 2014 Balmoral Residence BHM CO. LTD Subdivision including Ground works, Infrastructure and Roadways Client: Balmoral Development Ltd
Services Provided • Risk management • Value engineering • Construction management • Coordination with other contractors on site • Engineering including drainage and asphalt design
Benefits to Customer • Collaborative approach to negotiate additional works • Delivery on time and budget • Single point of contact for client team • Extensive value engineering input • Close working relationship with other contractors on site
Background The Balmoral Development is a gated community comprising a total of 70 single family lots, located on the south side of Stanford Drive. As part of sub-division works, BHM were initially employed by Balmoral Development Ltd to carry out site clearance and bulk earthworks on the project. Having successfully delivered this element of the works, the client had the confidence to negotiate significant additional works including the installation of a gravity and forced sewer system, water main, road sub base and hot mix asphalt paving. The works took place on a congested site as the lots were built while BHM carried out the subdivision element. BHM liaised closely with other contractors to ensure the works progressed smoothly and safely.
Project Description BHM were employed by Balmoral Developments to carry out the following scope of works:
• Site clearance • Bulk earthworks • Storm and sewerage drainage • Associated manholes and laterals • Water main • Roadway sub base • Hot Mix Asphalt paving
BHM branding - February www.bhm.construction 2014 Bay Street Marina BHM CO. LTD Construction of a new marina on Bay Street Client: Water Front Marina Ltd
Services Provided • Turnkey Design and Build Service • Value Engineering • Risk Management • Construction management • Design management and coordination of all interfaces • Benefits to Customer • Single point of contact for client • Technical expertise to incorporate the specialist requirements of the marina
• Construction methods taking account of Environmental considerations
Background Bay St Marina is an 89 slip marina capable of accommodating vessels up to 150 foot long. The marina is located east of Downtown, looking on to Paradise Island. The facility completed by BHM offers a wide range of amenities to users including pool and fitness centre, shower and laundry facilities. In addition, each slip has Wi-fi, power, fresh water and waste disposal services.
Project Description A number of complex elements were included in our scope of works including: • Sheet piling to form the concrete promenade • Land reclamation • Dredging • Marina dock constructed using Brazilian IPE timber • Concrete paved promenade • Bespoke housings to contain services • Sea water fire suppression system servicing all slips • Waste disposal system to all slips • High quality reverse osmosis water • Key card operated access control • Power supply and Wifi to all slips • Construction of the Dockmaster building
BHM branding - February www.bhm.construction 2014 Bay Street Paving BHM CO. LTD Road Reconstruction & Rehabilitation Client: Ministry of Public Works and Transport
Services Provided • Risk management • Value engineering • Construction management • Design Mmanagement of surfacing materials • Liaison with local business
Benefits to Customer • Works planned to minimise disruption to local business and road users • High standards of quality management • Employment of skilled local workforce • In house plant and materials • Delivered on time and to budget
Background As part of the Downtown Nassau Revitalization Project working for the MoWT and the Downtown Nassau Partnership, BHM were engaged to carry the reconstruction and rehabllltatlon of Bay St road leadlng from Blake Rd all the way to the busy Downtown Hiiton Hotel. This fonned part of a wider scheme to improve traffic management and pedestrian facilities within the area.
Project Description The scope of works for the reconstruction and rehabilitation of West Bay St roads included;
• Traffic Management design, notices and provision of signage to ensure works carried out safely and with minimum disruption • Replacement of collapsed culvert and drainage • Removal of any damaging vegetation and tree roots • Sidewalk and kerb replacement to bring up to modem, disabled compliant standards • Installation of temporary architectural bollards • Installation of 60,000 sq ft of new decorative paver side walk • Full depth reconstruction of the Bay St road and carriageway between Blake Road and the Downtown Hilton Hotel including intersections • Associated thermo plastic road markings.
BHM branding - February www.bhm.construction 2014 BEC Skyline Substation & Generator Farm BHM CO. LTD New Substation & Generator Farm Client: Baha Mar Ltd
Services Provided
• Risk management • Value engineering • Construction management • Coordination with BEC
Benefits to Customer
• Liaison with BEC to ensure seamless installation and commissioning of transformers
• Sequencing of works to reduce timescales
• Single point of contact for client team
• Engineering Quality Assurance of installations
Background BHM completed the $4.5million construction of the new BEC Skyline Substation and Generator farm complex to facilitate HV Asset relocation required as part of the infrastructure works required for the Bahamar Development. BHM worked closely with BEC and the Client to coordinate the installation of infrastructure to supply the various transformers and control buildings.
Project Description BHM were appointed by Baha Mar Ltd for the construction of this new substation complex. The project included: • Substructure to receive enclosures • Control buildings • Extensive insitu concrete duct trenches • Construction of 7 Modular substation enclosures • Construction of 4 generator enclosures • Ancillary services to the site including street lighting drainage and metalwork • Landscaping • Construction of new access road and laydown areas • Boundary wall and security fencing
BHM branding - February www.bhm.construction 2014 Bimini Airport Runway BHM CO. LTD Runway extension and Apron expansion Client: OPAC Ltd, Bimini Bay Resort
Services Provided • Risk Management • Value Engineering • 1,000 foot runway extension • Increased apron capacity and additional taxiway • Asphalt mix design including quality assurance services
Benefits to Customer • Economic benefit achieved for the Bimini Economy • new runway and apron ensures greater airlift capacity in terms of quantity and size of planes • Zero accidents / incidents during project ensuring high levels of safety and security • Minimal disruption caused as works carried out to suit current airport operations • Integrated team working with the Client and the airport operators
Background The development of Bimini Bay Resort will bring with it significant growth in visitors in the future. Made up of three islands, North Bimini, South Bimini and East Bimini, Bimini is the closest point in the Bahamas to the USA. The airport is situated on the South Island, with Bimini Bay Resort, the Port and the majority of the amenities located on the North Island. Movement between the islands is only possible by boat. To accommodate the anticipated growth in visitors to Bimini, the infrastructure needed significant improvements, including an extension to the existing runway to accommodate larger planes.
Project Description BHM was appointed as Main Contractor to undertake significant improvements to the airport’s existing airside infrastructure. The project included the extension of the existing runway by 1,000ft, increasing the area of the existing apron by nearly 200% and the construction of a new taxi-way onto the runway to supplement the existing. The whole project required BHM to undertake bulk earthworks, grading and HMA paving.
BHM branding - February www.bhm.construction 2014 Borco Terminal fire main upgrade BHM CO. LTD Replacement of a section of 10’’ steel above ground fire main with 16’’ HDPE below grade pipes Client: Buckeye Partners
Services Provided • Demolition of 3,500 feet of existing steel pipeline • Installation of new 16’’ HDPE buried pipe line without disrupting the funcionality of the fire system and the entire facility • Installaltion of stub outs for 17 foam fire suppression hydrants
Benefits to Customer • Replacement of above ground pipe line with more protected below ground pipes. • Bigger diameter of new pipes ensures higher capacity of the fire suppression system • Project was phased in order to maintain the operation of the fire suppression system, minimizing at each step the section taken off the line.
Background The project was conducted without disrupting the every day activities of the oil facility, and minimizing the loss of capacity of the existing fire main system. Each section was tested at 150 psi and commissioned immediately after completion and before proceeding to the following section. Demolition and replacement activities were conducted under the strict safety policy required by the Owner, and the project was completed without any incident or causing damage to the existing facilities
Project Description BHM was awarded the contract to replace a section of the existing 10’’ fire main system (3500 feet) with a 16’’ HDPE below grade pipeline. The benefits of the new systems are: • Higher capacity due to larger diameter and higher flow capacity of HDPE • New pipeline is more protected from fire and potential impact with heavy equipment • Site HDPE pipe is not affected by corrosion of any type.
BHM branding - February www.bhm.construction 2014 Charlottesville Community BHM CO. LTD Sub-Division infrastructure and road construction Client: Private Developer
Services Provided • Risk management • Value engineering • Construction management • Consideration of local environment and neighbouring developments
Benefits to Customer • Delivered on time and to budget • Single point of contact for client team • Quality of engineering works • Coordination with utility suppliers
Background Located in the western district near to Lyford Cay, Charlottesville is one of Nassau’s premier gated communities. BHM were responsible for the necessary sub-division works on this 205 lot neighbourhood. Amenities within the development include community club house, swimming pools, tennis courts, volley ball courts and playgrounds.
Project Description As part of this scheme, BHM were employed to carry out the following scope of works:
• Site clearance • Bulk earthworks and the treatment of major cavities • Storm water drainage • Installation of scheme water supply and distribution • Sewerage collection and disposal system including lift stations • Associated manholes • Hot mix asphalt paving • Road markings.
BHM branding - February www.bhm.construction 2014 Disney Castaway Cay BHM CO. LTD Road Construction and Site Development Client: Disney
Services Provided • Construction management • Working with client • Managing disruption to Client • Flexible scheduling
Benefits to Customer • Enhanced customer experience • Close working relationship with other contractors on site • High standards of quality and safety management • In house quality assurance and testing • Equencing of works to reduce timescales and disruption to customers
Background Castaway Cay is Disney’s private island in the Bahamas, which serves as an exclusive port for the disney cruise line ships with its own dock and pristine beaches.
Project Description BHM were awarded these repeat works to upgrade the facilities, having worked on two previous phases on the development of Castaway Cay.
The works on the remote castaway cay included the upgrading of existing and construction of new cycle ways and themed routes and access in chip and sand seal pavement construction.
The project included; • Selective Clearing to preserve the natural environment • Bulk Earthworks and Grading • Chip and Sand Seal Access and themed Routes
BHM branding - February www.bhm.construction 2014 East Bay Marina Dockmaster Facility BHM CO. LTD Construction of Dockmaster Quarters Client: Water Front Mariner Ltd.
Services Provided • Turnkey Design and Build service • Value engineering • Construction management • Design management and coordination of all interfaces.
Benefits to Customer • Single point of contact for client in terms of design and build • Impact of the works on existing users addressed • Liaison with clients interior designer • High quality finish achieved throughout • Seamless integration of client supplied FF&E.
Background Having completed work for Waterfront Marine Ltd previously, BHM were appointed to construct the Dockmaster building to service the prominent 89 berth Marina in Bay Street, Nassau. In keeping with local Bahamian architecture, the building included Dockmaster’s office, Fitness Centre, Pool, TV room, shower, kitchen and laundry facllltles.
Project Description The scope of works for the Dockmaster’s Quarters included: • Sheet piling to form concrete promenade • Importing of fill and ground compaction • Utilities to the building • Erection of timber frame structure • Architectural glazing and limber cladding • All interior fit out • Installation of high end specification interior finishes and appliances • Car parking and decorative landscaping.
BHM branding - February www.bhm.construction 2014 Endauld Property BHM CO. LTD Buildings Client: Private Developer
Services Provided
• Working with Client and Architect
• Construction management
• Proactive Design management and coordination of all interfaces.
Benefits to Customer
• High quality finish achieved throughout
• Built within an existing development with minimal impact
• Completed within agreed timescale and Budget
Background Within the existing luxury community of Lyford Cay in the Bahamas, BHM were commissioned to construct a new high quality bespoke residence and adjoining guest cottage. Lyford Cay is an established premier community boasting a marina, golf course, Private Club House, amongst many other facilities. The properties within Lyford Cay, feature traditional and non-traditional Bahamian architecture and offer views of the marina and golf course and mature landscapes.
Project Description BHM was appointed by the Client Representatives for the construction of this Ultra High End residence in the prestigious Lyford Cay subdivision in Nassau. The scope of works for the property included; • Demolition of existing property • Earthworks • Reinforced concrete and blockwork structure with render finish • Architectural glazing and bespoke external finishes • Installation of high end specification interior finishes, appliances and fixtures • Private swimming pool and gazebo • Driveway and walkways • Decorative paving and landscaping.
BHM branding - February www.bhm.construction 2014 Freeport Container Port BHM CO. LTD Container stacking port Client: Hutchinson Whampoa
Services Provided • Risk management
• Value engineering
• Construction management
• Laboratory testing
Benefits to Customer • Collaborative approach to give client best value
• Single point of contact for client team
• Coordination with existing infrastructure
• In house plant, materials and testing
Background Since 2005 BHM has executed multiple projects at the Freeport Container Port creating over 30 acres of container stacking areas inclusive of GS6, Delta 2,3,4, ASC, Shoreline protection Works, and Roadway Rehabilitation of Alpha and Bravo Blocks.
Project Description The project scope included:
• Site clearance • Removal of contaminated soils • Bulk earthworks • Drainage and well drilling • Density testing • Sub base and base layers • 4 inch type S-II hot mix asphalt pavement • Areas of chip and seal • Security fencing
BHM branding - February www.bhm.construction 2014 Ginn Sur Mer BHM CO. LTD Utilities and Site Development Client: Ginn Sur Mer Development
Services Provided
• Construction management
• Asphalt and concrete design
• Working with client
• Flexible scheduling
Benefits to Customer
• Close working relationship with other contractors on site
• High standards of quality and safety management
• In house quality assurance and testing
Background Surrounded by blue-green waters and powder white sand beaches, ginn sur mer will be a true island paradise. A grand canal serviced by water taxis, gondolas and visitors’ yachts will be the main means of transportation throughout the island with two oceanfront golf courses, a casino, designer stores and boutiques, and a wide variety of fine-dining restaurants.
Project Description Site works on four contracts on this prestigious project included, site clearance, bulk earthworks and grading, the installation and commissioning of water and waste water systems, drainage, drainage well drilling and the construction of future duct banks. Road Construction, slip form curbing, HMA paving, signage and white lining.
Works included the rehabilitate of the private runway.
The project included; • Bulk Earthworks and Grading • Utility Installation, Water, Waste Water and Drainage • HMA Paving and slip form curbing
BHM branding - February www.bhm.construction 2014 Harrold Road BHM CO. LTD Roads and infrastructure Client: Ministry of Public Works and Transport
Services Provided
• Risk Management
• Construction management
• Design management of surfacing materials
• Traffic management
Benefits to Customer
• Works planned to minimize disruption to local business and road users
• Single point of contact for client team
• Coordination with existing roads and infrastructure
• In house plant, materials and testing
Background BHM carried out these works for the Ministry of Public Works and Transport as part of the Island wide Nassau Road Improvement project. The works were carried out under strict traffic management to ensure traffic flows on the heavily congested Harrold Road artery. BHM worked closely with BEC to coordinate distribution of electrical services concurrently with our own works to minimize disruption to the general public.
Project Description The scope for this $7.7million contract included: • Site clearance • Bulk earthworks • Stabilisation and base work • Grading and profiling • Road drainage including gullies and swales • Installation of utility and BEC service ducts • Construction of new side walks • Hot mix asphalt road construction • Thermo plastic road markings • Hard and soft landscaping • Street lighting
BHM branding - February www.bhm.construction 2014 High Point Estates BHM CO. LTD Sub-Division infrastructure and road construction Client: Private Developer
Services Provided • Risk management • Value engineering • Construction management • Engineering including drainage and asphalt design
Benefits to Customer • Delivered on time and to budget • Single point of contact for client team • Provision of accurate records for the development • Coordination with utility suppliers including BEC
Background BHM were appointed by a private developer to carry out the necessary sub-division works required to facilitate the development of High Point Estates, a gated community in the western district of New Providence. As part of value engineering to meet the client budget, BHM were able to reduce costs by rationalizing drainage and utility routes.
Project Description As part of thi scheme, BHM were employed to carry out the following scope of works:
• Site clearance • Bulk earthworks and cutting • Sub base and grading works • Hot mix asphalt paving • Water distribution system • Sewerage collection and disposal system including lift stations • Associated manholes • Electrical supply and distribution • Telephone supply and distribution • Street lighting • White lining and signage
BHM branding - February www.bhm.construction 2014 Independence Business Park BHM CO. LTD Commercial Business Park Client: Private developer
Services Provided • Full Design and Build of facility • Construction management • Risk management • Value engineering • Design management
Benefits to Customer • Single point of contact for client • Design of a flexible structure while achieving maximum rental space • Effective site management to minimize impact on local community during construction.
Background Independence Business Park was created to address the growing needs of the local business community. Flexibility of the space was important to our client to allow customization of the units to accommodate larger businesses in the future. Completed in May 2010, this faclllty now provides accommodation for a range of businesses induding Dunkin Domuts, Cable Bahamas, Mac Fit 360, Newlife Natural Vegetation, Insurance Company of the West Indies (ICWI), New Life Restoration Ministries and Nautical Boutique.
Project Description BHM was appointed by a Private Developer for the construction of a new 30,000 sq ft development comprising 2 separate retail buildings. The scope of works for this $5.5mllllon scheme included: • Initial site clearance and preparation • Bulk earthworks • Site infrastructure and utilities • Erection of steel frame • Interior and exterior block work • Envelope finishes including cladding, roofing, hurricane resistant glazing and doors • External access roads and onsite parking facilities • Site security systems and CCTV • Associated paving, landscaping and perimeter fencing
BHM branding - February www.bhm.construction 2014 Lynden Pindling International Airport BHM CO. LTD Expansion of existing International Airport Client: Nassau Airport Development Company
Services Provided • Management of construction • Risk management • Value engineering • Design management of surfacing materials • Dedicated mixing plant, • Pavers and ancillary equipment • Liaison with all stakeholders • Consideration of local environment and neighbours
Benefits to Customer • Safety and security within airside and public environments • On-site impact kept to a minimum on operational airport • Working to tight time frames to suit airport operations • Integrated team working with the Client and airport operators • Close working relationship with other contractors on site • Accelerated construction programme • Staged completion and early access for Client and other contractors fit out • Ability to accommodate design changes during construction • Innovative solutions
Background Named after Sir Lynden Pindling, the first Prime Minister of the Commonwealth of The Bahamas, the airport sits just west of Nassau. The expansion of the airport was essential to attract and accommodate up to 5 million passengers annually and become one of the top world-class airports in North America. With US pre-clearance facility, the airport offers Americans and transit passengers to and from the United States, who will make up 80% of passengers in the future, the added advantage of transitioning through US Customs and Immigration before leaving The Bahamas. The expansion of the airport was undertaken in three stages. Stage One - US Departures Terminal. Stage Two - construction of a new International Arrivals Terminal and Pier. Stage Three - the construction of a new International Departures Terminal, together with a new Domestic Terminal.
Project Description BHM contracted by Nassau Airport Development Company for the construction of airside and landside civil engineering works • Taxiway widening and surfacing for aprons • Pier B apron surfacing and concrete drive bridge pads • Widening culvert, installation of drainage and utilities • Airfield lighting, elevated LED Edge and taxiway lighting • Full construction including utilities, drainage, surfacing, lighting & landscaping for:- ▪▪ Long, short term and rental car parking area; ▪▪ Taxi, bus and limousine holding areas;
BHM branding - February www.bhm.construction 2014 Lynden Pindling International Airport BHM CO. LTD C-116 Early Civils and Utility Relocations - Site development Client: Nassau Airport Development Co (NAD)
Services Provided
• Constructment management
• Risk management
• Asphalt design
• Working with client
• Flexible scheduling
Benefits to Customer
• Close working relationship with other contractors on site
• High standards of quality and safety management
• In House Quality Assurance and testing
Background Lynden Pindling International Airport, is the largest airport and gateway into the Bahamas. The airport to increase capacity and update the airport facilities has been redeveloped in three phases the first stage included the construction of a new U.S departures terminal. Stage 2 consisted of the complete renovation of the current U.S terminal, as the new U.S/international arrivals terminal, stage 3 involved the design and construction of a new domestic arrivals and departures terminal, as well as an international departures terminal.
Project Description BHM working directly for NAD, were awarded the preliminary site works which included initial demolition of existing buildings and utility relocation, rough grading, the removal of existing security fencing and the removal of the existing bunded fuel tanks. The HMA paving, electrical and communication systems, lighting and fencing of the customs area and the installation of macerator and trash compaction and sewer system. The project included; • Site Clearance, Grading and Access Construction • Demolition of and the relocation of Existing Services • Electrical and Communication Installation • HMA Paving
BHM branding - February www.bhm.construction 2014 Lynden Pindling International Airport BHM CO. LTD C-230 Redevelopment Client: Nassau Airport Development Co (NAD)
Services Provided
• Constructment management
• Risk management
• Construction management
• Asphalt design
• Working with client
• Flexible scheduling
Benefits to Customer
• Close working relationship with other contractors on site
• High standards of quality and safety management
• In House Quality Assurance and testing
Background Lynden Pindling International Airport, is the largest airport and gateway into the Bahamas, with the airport being managed by Nassau Airport Development Company (NAD). The airport to increase capacity and update the airport facilities has been redeveloped in three phases the first stage included the construction of a new U.S departures terminal. Stage 2 consisted of the complete renovation of the current U.S terminal, as the new U.S/International arrivals terminal, stage 3 involved the design and construction of a new domestic arrivals and departures terminal, as well as an international departures terminal.
Project Description BHM working directly for NAD, were awarded the preliminary pre building works for the LPIA expansion project the works including initial site clearance, the salvaging of site won material, proof rolling and grading of the sub grade, the importation of lime rock fill material to achieve grade. The excavation of the new terminal foundations and footings and preparation of base material, backfilling and compaction.
The project included; • Site clearance, grading and access • Demolition of existing services • Bulk Earthworks • Building Foundation Excavation and Preparation
BHM branding - February www.bhm.construction 2014 Lucayan Tropical BHM CO. LTD Construction of Lucayan Tropical Green House Client: Lucayan Tropical Ltd.
Services Provided • Consideration of local environment • Construction management • Risk management • Value engineering • Design management.
Benefits to Customer • Single point of contact for client • Environmentally friendly solutions including rainwater harvesting • Ability to incorporate the specialist requirements of the facility • Provision of a controlled farming environment.
Background Lucayan Tropical Produce was fonnad with the aim of improving the quality of produce available in the Bahamas. The construction of a Hydroponic Greenhouse by BHM allowed this aim to be achieved. “Hydroponic” fanning involves innovative techniques where solution is used rather than soil. This method isolates the plant from the ground, thereby ellmlnating sources of disease. This results in significant gains in terms of both yield and quality of produce for example soil typically produces 5-10 tonnes of tomato per acre per annum, hydroponic can exceed 200 tonnes per acre per annum.
Project Description BHM was contracted by Lucayan Tropical Produce Ltd for the construction of a six acre state of the art hydroponic farm, the first of its kind in the Bahamas. The works for this innovative $12 million project included: • Bulk earthworks • Site infrastructure and utilities • Installation of 1 million gallon rainwater harvesting tanks • Erection of hurricane resistant galvanized steel and aluminum structure • Glazed cladding and roofing
BHM branding - February www.bhm.construction 2014 Marsh Harbour Runway BHM CO. LTD Construction of new parallel runway Client: Ministry for Public Works and Transport, Bahamas
Services Provided • Risk management • Value engineering • Construction of a new 6100 feet jet runway • Conversion of original runway into a jet way • Runway and taxiway electrical works
Benefits to Customer • Economic benefit achieved for the Abaco economy. • New scheme ensured compliance with the International Civil Aviation Organisation requirements. • Safety and security within airside and public environments • On-site impact kept to a minimum on an operational airport • Working to tight time frames to suit airport operations • Integrated team working with the Client and airport operators • Close working relationship with other contractors on site
Background Abaco has around 90,000 visitors every year; Marsh Harbour Airport is the second busiest airport in the country and one of the busiest airports in the entire Caribbean region. The building of the new Marsh Harbour airport terminal, air traffic control tower and fire/ crash rescue facility and new runway was designed to enhance Marsh Harbour Airport’s capacity to provide quality service to the growing number of Abaco residents and visitors.
Project Description BHM was appointed as a major specialist subcontractor to support and collaborate with the main contractor FES Construction. The project included the construction of a new parallel runway, including site clearance, bulk earthworks, HMA paving, runway lighting, signage and approach lighting. It also required the rehabilitation and extension of the existing runway and associated taxiway links.
BHM branding - February www.bhm.construction 2014 New Providence Road BHM CO. LTD New Providence Island road corridor improvements Client: Jose Cartellone
Services Provided • Risk management • Value engineering • Design management of surfacing materials • Asphalt and concrete design • Liaison with existing local businesses, home owners and motorists • Consideration of local environment and traffic congestion
Benefits to Customer • Ensuring minimum disruption to road users • Out of hours working hours • Advance notification of areas of work to the local communities and press • Impact of the works on neighbours kept to a minimum. • Integrated team working collaboratively with main Contractor • Ability to react promptly to unforeseen circumstances or traffic congestion • Innovative solutions to keep road fully operational at busy times
Background The New Providence Road Improvement Project has decreased traffic congestion and relieved motorists frustration, with a major upgrade and improvement of the road network.
The project includes construction of 11.6 miles of roads, and comprises of nine new roads, major improvement of ten existing roads and numerous new or improved intersections
Project Description BHM was appointed as a major specialist subcontractor to support and collaborate with the main contractor, Jose Cartellone Construcciones Civiles. The project included the major reconstruction and improvement of numerous roads within the urban environment of Nassau. Much of the works were undertaken out of busy commuter hours to minimise disruption to the general public and road users. The works for BHM being predominately:- • All base course works • Full depth reconstruction of the existing roads • Earthworks and full depth construction of new roads • All asphalt surfacing works • Associated sidewalk and concrete pavements.
BHM branding - February www.bhm.construction 2014 Norman’s Cay Runway BHM CO. LTD Construction of New Runway, Apron and Marina Client: Exuma Resort Developers Limited
Services Provided • Design and build project, progressing initial contract design • Construction of a new runway, 4,700 feet long • Excavation of a marina • Reclamation of Ocean for runway extension • Environmental monitoring • Value Engineering • Logistic support during construction.
Benefits to Customer • Completion of the runway, aircraft parking apron, shore protection, fencing, roads and marina • New scheme will ensure compliance with International Civil Aviation Organisation airfield requirements • Ability to accommodate design progression and changes during construction • Able to satisfy the requirements of Bahamas Environment, Science and Technology Commission • Phasing of the project to maintain the operation of the existing runway.
Background The existing Norman’s Cay Airstrip was in poor condition and only 3,000 feet long; the airfield did not comply with international regulations for flight operations.
The client is intending to develop an upscale resort and luxury housing on the Cay and wished to upgrade the airfield so that it could become a point of entry into the Bahamas. A marina was also to be developed for the use of the residents and guests.
Project Description BHM was appointed main contractor for the runway and marina works. The project includes the excavation of a marina which provides fill for the bulk earthworks for a new runway built partially on reclaimed land. Also included in the project are surface dressing, shore protection, sand seal road, fencing and traffic marking works. Due to the environmentally sensitive nature of the surroundings, inclusive of a National Marine reserve, a high degree of environmental compliance was established on the project.
BHM branding - February www.bhm.construction 2014 North Abaco Roads BHM CO. LTD Road works Client: Ministry of Public Works and Transport
Services Provided
• Value Engineering • Risk Management • onstruction management • Traffic management • Ashpalt Design
Benefits to Customer
• Single point of contact for client • Works planned to minimize impact on road users
• High standards of quality and safety management • In house plant and materials
• Employment of skilled local workforce
Background As part of wider infrastructure upgrades on Abaco Island, BHM completed the contract for the rehabilitation of North Abaco Settlement Roads over a distance of 33 miles.
Project Description
Our scope of works included: • Bulk Earthworks • Shaping and grading • Traffic management to ensure works carried out safely • Edge treatment and making good of existing surface • New chip and sand seal roads construction • Thermoplastic road markings
BHM branding - February www.bhm.construction 2014 Ocean Club Estates BHM CO. LTD Subdivision including groundworks, infrastructure and roadways Client: Kerzner Developments
Services Provided
• Value Engineering
• Risk Management
• Construction management
• Asphalt design
Benefits to Customer
• Single point of contact for client
• High standards of quality and safety management
• In house plant and materials
• Employment of skilled local workforce
Background The Ocean Club Estate is an elite development located on Paradise Island, comprising 122 single family homes and 88 condominiums. Ocean Club is one of the most exclusive developments in the Bahamas with properties selling for multi-million dollar sums. BHM were awarded the contract for the subdivision infrastructure works required for this prestigious site.
Project Description Our scope of works included: • Water distribution • Sewerage collection • Road drainage • Telecom and electrical below ground ductwork • Hot mix asphalt road construction • Thermoplastic road markings
BHM branding - February www.bhm.construction 2014 Sandypoint Highway BHM CO. LTD Roadworks Client: Government of the Bahamas
Services Provided
• Value Engineering • Risk Management • Construction management • Traffic management • Ashpalt and Concrete Design
Benefits to Customer
• Single point of contact for client • Works planned to minimize impact on road users and tourism • High standards of quality and safety management • In house plant and materials • Employment of skilled local workforce
Background As part of wider infrastructure upgrades on Abaco Island, BHM completed the contract for a new roadway between Marsh Harbour and Sandy Point totalling 55 miles of roadway.
Project Description Our scope of works included: • Bulk Earthworks • Shaping and grading • Localised areas of shoreline protection • Traffic management to ensure works carried out safely • New chip and sand seal roads surfacing • Thermoplastic road markings
BHM branding - February www.bhm.construction 2014 Shirley Street BHM CO. LTD Road reconstruction and rehabilitation, water and sewerage works Client: Ministry for Public Works and Transport Bahamas
Services Provided • Risk management • Value engineering • Construction management • Traffic management • Liaison with all stakeholders
Benefits to Customer • Large reduction in water leaks • Economic benefits totaling several million dollars per annum • Positive impact on local community • Out of hours working to minimize disruption • Integrated working with BEC
Background With a sewerage system originating back to 1926, the infrastructure within Shirley St was in urgent need of upgrade and repair. The Water and Sewerage Corporation (WSC) estimated that 90% of leaks were occurring via the water service lines, highlighting the need for replacement. It was anticipated that the upgrades carried out by BHM would result in cost savings totaling several million dollars per annum. In addition, the paving to Shirley Street also required improvement which BHM carried out in conjunction with the water service and sewerage works.
Project Description To minimize disruption to the general public, BHM carried out the majority of the works under out of hours and traffic management restrictions. The full scope of works included; • Replacement of existing water services including laterals • Replacement of sewerage systems including decommissioning • and re-commissioning • Full depth reconstruction of roads • Rehabilitation to areas of retained existing roads • Associated manholes • Thermoplastic road markings
BHM branding - February www.bhm.construction 2014 Sports Complex Development Project BHM CO. LTD National Sporting Complex Development Client: Ministry of Works and Transport
Services Provided • Risk management • Value engineering • Special design of surfacing materials for Sporting Association compliance • Asphalt and concrete design • Liaison with stakeholders, users and approved associations • Consideration of local environment and relocation of existing facilities
Benefits to Customer • Single point of contact for stakeholders and Client • Impact of the works on existing users addressed • Integrated team working collaboratively with the Client and Stakeholders • Ability to react promptly to the requirements of the specialist associations • Innovative solutions proposed and agreed with specialists
Background The new National Stadium is in the heart of New Providence on a 450 acre plot which includes access roads, 15,000 capacity parking, a recreational park, velodrome cycling track, athletes’ village - complete with facilities for American football, baseball and softball stadiums. The whole complex includes commercial and press facilities. To achieve the National Stadium in this key location, the existing hot rod drag racing strip and other facilities had to first be successfully relocated.
Project Description BHM was the lead partner of the Joint Venture contracted by the Government of the Commonwealth of the Bahamas for the construction of infrastructure works for the National Stadium together with major works for the overall National Sporting Complex Development. Works being undertaken included: • 4 Major roadways to supplement the New Providence Road Network and provide stadium access; • 4 Major junction improvements along Yellow Elder Way, Thompson Boulevard and Baillou Hill Road; • Stadium parking areas with ancillary works; • Utility, drainage and landscaping for Stadium surrounds; • Upgrade of the existing waste water treatment plant for the Greater Oakes Field and Yellow Elder Area; • Relocation and upgrade of drag racing track to International Hot Rod Association compliance.
BHM branding - February www.bhm.construction 2014 West Bay Street Realignment BHM CO. LTD Infrastructure works for Cable Beach resort Client: Baha Mar Ltd.
Services Provided • Risk management • Value engineering • Design management of surfacing materials • Asphalt and concrete design • Liaison with existing local businesses and hotels • Consideration of local environment and ensuring no contamination issues
Benefits to Customer • Ensuring minimum disruption to road users • Impact of the works on neighbours kept to a minimum. • Works carried out to avoid disruption to existing hotels • Integrated team working closely with Baha Mar team • Ability to react promptly to design changes or unforeseen circumstances • Working closely with Power Company to completely avoid power outages • Innovative solutions
Background Baha Mar, hotel development and major infrastructure is set on 3,000 feet of white-sand beach just 12 minutes from Nassau’s newly expanded Lynden Pindling International Airport. The resort features an elite collection of hotel brands with gaming, entertainment, private residences, shopping and natural attractions that reflect an authentic Bahamian experience. Amenities include the 18-hole, 72-par championship Jack Nicklaus Signature Golf Course, a state of the art convention facility, which includes a 2,000-seat performing arts centre and art gallery. The whole project has required major new and upgraded infrastructure including new highways, reinforced power and other utility supplies support by a full upgrade of Nassau International Airport.
Project Description BHM as lead partner of a joint venture and overall contract administrator were contracted by Baha Mar Ltd for the construction of the major infrastructure works on one of the largest resort developments in the Caribbean. The project included: • The realignment of West Bay Street, a major arterial roadway for New Providence; • Construction of 7 roundabouts to supplement access to the new hotel resort development; • Ancillary works for utility service upgrades, drainage, street lighting, and landscaping; • New parking areas for relocated Straw Market, employees, and patrons; • Relocation of the famous Cable Beach Median Walk. • The construction of a new dual carriageway between realigned West Bay Street, the development and John F. Kennedy Drive, part of the main spine road for the island of New Providence; • Construction of a further 3 roundabouts on existing major roads; • Ancillary works for utility service upgrades, drainage, street lighting, and landscaping; • Relocation of 132kVA high voltage power lines.
BHM branding - February www.bhm.construction 2014