BLD 131 – Carpentry Framing I

Total Page：16

File Type：pdf, Size：1020Kb

SYLLABUS DIVISION: Business and Engineering Technology REVISED: Spring 2014 CURRICULA IN WHICH COURSE IS TAUGHT: Building Trades COURSE NUMBER AND TITLE: Bld 131 Carpentry I CREDIT HOURS: 5 HOURS/WK LEC: 3 HOURS/WK LAB: 4 LEC/LAB COMB: 7 I. CATALOG DESCRIPTION: : Presents an introduction to carpentry with emphasis on residential construction. Covers safety on the job, appropriate use of power tools, basic construction techniques, an introduction to working drawings, and the team approach to residential buildings. Presents an introduction to selection and use of ladders and scaffolds, basic form removal and demolition, and use of basic first aid. Includes the concepts of carpentry framing for floors, walls, ceilings, porches and decks. Includes theoretical and practical application as well as the concepts of carpentry framing for roof, truss installation and door and window installation. II. RELATIONSHIP OF THE COURSE TO CURRICULA OBJECTIVES: Provides students with the information necessary to continue in the field of carpentry. It gives students experience with “hands on” training. III. REQUIRED BACKGROUND/PREREQUISTIES: Carpentry l IV. COURSE CONTENT: Construction terminology Building materials Use of tools Blueprints Floor framing Wall framing V. THE FOLLOWING GENERAL EDUCATION OBJECTIVES WILL BE ADDRESSED IN THIS COURSE (Place X by all that apply) x Communications Cultural and Social Understanding x Critical Thinking x Quantitative Reasoning x Personal Development Scientific Reasoning x Information Literacy VI. LEARNER OUTCOMES VII. EVALUATION Learner outcome Evaluation method Execute framing techniques for floor and Lab exercises wall framing…. Written test Exam Learner outcome Evaluation method Select and use proper building materials Lab exercises Written test Exam Learner outcome Evaluation method Apply blueprint skills to the jobsite Lab exercises In class assignments Written test Exam .

Copy Link

Recommended publications

LP Solidstart LVL Technical Guide
U.S. Technical Guide L P S o l i d S t a r t LV L Technical Guide 2900Fb-2.0E Please verify availability with the LP SolidStart Engineered Wood Products distributor in your area prior to specifying these products. Introduction Designed to Outperform Traditional Lumber LP® SolidStart® Laminated Veneer Lumber (LVL) is a vast SOFTWARE FOR EASY, RELIABLE DESIGN improvement over traditional lumber. Problems that naturally occur as Our design/speciﬁcation software enhances your in-house sawn lumber dries — twisting, splitting, checking, crowning and warping — design capabilities. It ofers accurate designs for a wide variety of are greatly reduced. applications with interfaces for printed output or plotted drawings. Through our distributors, we ofer component design review services THE STRENGTH IS IN THE ENGINEERING for designs using LP SolidStart Engineered Wood Products. LP SolidStart LVL is made from ultrasonically and visually graded veneers arranged in a speciﬁc pattern to maximize the strength and CODE EVALUATION stifness of the veneers and to disperse the naturally occurring LP SolidStart Laminated Veneer Lumber has been evaluated for characteristics of wood, such as knots, that can weaken a sawn lumber compliance with major US building codes. For the most current code beam. The veneers are then bonded with waterproof adhesives under reports, contact your LP SolidStart Engineered Wood Products pressure and heat. LP SolidStart LVL beams are exceptionally strong, distributor, visit LPCorp.com or for: solid and straight, making them excellent for most primary load- • ICC-ES evaluation report ESR-2403 visit www.icc-es.org carrying beam applications. • APA product report PR-L280 visit www.apawood.org LP SolidStart LVL 2900F -2.0E: AVAILABLE SIZES b FRIEND TO THE ENVIRONMENT LP SolidStart LVL 2900F -2.0E is available in a range of depths and b LP SolidStart LVL is a building material with built-in lengths, and is available in standard thicknesses of 1-3/4" and 3-1/2".
[Show full text]
TECO Design and Application Guide Is Divided Into Four Sections
Structural Design and Plywood Application Guide INTRODUCTION Plywood as we know it has been produced since early in the 20th century. It has been in widespread use as sheathing in residential and commercial construction for well over 50 years and has developed a reputation as a premium panel product for both commodity and specialty applications. Structural plywood products give architects, engineers, designers, and builders a broad array of choices for use as subfloors, combination floors (i.e. subfloor and underlayment), wall and roof sheathing. Besides the very important function of supporting, resisting and transferring loads to the main force resisting elements of the building, plywood panels provide an excellent base for many types of finished flooring and provide a flat, solid base upon which the exterior wall cladding and roofing can be applied. This TECO Design and Application Guide is divided into four sections. Section 1 identifies some of the basics in selecting, handling, and storing plywood. Section 2 provides specific details regarding the application of plywood in single or multilayer floor systems, while Section 3 provides similar information for plywood used as wall and roof sheathing. Section 4 provides information on various performance issues concerning plywood. The information provided in this guide is based on standard industry practice. Users of structural-use panels should always consult the local building code and information provided by the panel manufacturer for more specific requirements and recommendations.
[Show full text]
Molding-Program.Pdf
Moulding Program Conestoga offers several different moulding programs for your convenience. Minimum Maximum Lead-Time, Program Selection Species Grade Order Quantity Order Quantity Days Stock Choice 1 piece 25 pieces* 3 8 ft. Standard Profiles Non-stock Choice 1 piece None 10 10 ft. Standard Veneer Wrapped Profiles Stock Veneer 1 piece None 3 12 ft. Standard Profiles Non-stock Choice 1 piece None 10 8 ft. Non-standard and Special Order Profiles Any Choice 1 piece** None 10 12 ft. Non-standard and Special Order Profiles Any Choice 1 piece** None 10 Random Length Cabinet Framing/S4S Any Prime 100 ft. None 10 *Maximum stock order per specific profile and specie is 25 pieces. Orders exceeding 25 pieces require 10 day lead-time. **Non-standard profile orders of less than 100 lineal feet will incur a set-up charge. Solid Wood Moulding Specifications • Eight foot standard and non-standard mouldings will be shipped 94" to 97" in length. • Ten foot standard veneer wrapped moulding will be shipped 118" to 122" in length. • Twelve foot standard and non-standard mouldings will be shipped 142" to 146" in length. • Natural specie characteristics that exhibit the character and beauty of wood will be evident on mouldings. These characteristics will include, but not be limited to, color variations, heartwood, sapwood, pin knots, worm holes and surface and end checks. Conestoga specifications do not allow these characteristics to affect structural integrity of the mouldings. • Natural characteristics that become evident through machining, environmental or atmospheric conditions such as minor bows, twists and crooks, may be evident but will not affect product quality or impede workability.
[Show full text]
Creating a Timber Frame House
Creating a Timber Frame House A Step by Step Guide by Brice Cochran Copyright © 2014 Timber Frame HQ All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, recording or otherwise, without the prior written permission of the author. ISBN # 978-0-692-20875-5 DISCLAIMER: This book details the author’s personal experiences with and opinions about timber framing and home building. The author is not licensed as an engineer or architect. Although the author and publisher have made every effort to ensure that the information in this book was correct at press time, the author and publisher do not assume and hereby disclaim any liability to any party for any loss, damage, or disruption caused by errors or omissions, whether such errors or omissions result from negligence, accident, or any other cause. Except as specifically stated in this book, neither the author or publisher, nor any authors, contributors, or other representatives will be liable for damages arising out of or in connection with the use of this book. This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory; direct, indirect or consequential damages; income or profit; loss of or damage to property and claims of third parties. You understand that this book is not intended as a substitute for consultation with a licensed engineering professional. Before you begin any project in any way, you will need to consult a professional to ensure that you are doing what’s best for your situation.
[Show full text]
Design/Construction Guide: Wood Structural Panels Over Metal Framing
Wood Structural Panels Over Metal Framing DESIGN/CONSTRU C T I O N G UI D E Wood Structural Panels Over Metal Framing 2 WOOD The Natural Choice Engineered wood products are a good choice for the environment. They are manufactured for years of trouble-free, dependable use. They help reduce waste by decreasing disposal costs and product damage. Wood is a renewable, recyclable, biodegradable resource that is easily manufactured into a variety of viable products. A few facts about wood. ■ We’re growing more wood every day. Forests fully cover one-third of the United States’ and one-half of Canada’s land mass. American landowners plant more than two billion trees every year. In addition, millions of trees seed naturally. The forest products industry, which comprises about 15 percent of forestland ownership, is responsible for 41 percent of replanted forest acreage. That works out to more than one billion trees a year, or about three million trees planted every day. This high rate of replanting accounts for the fact that each year, 27 percent more timber is grown than is harvested. Canada’s replanting record shows a fourfold increase in the number of trees planted between 1975 and 1990. ■ Life Cycle Assessment shows wood is the greenest building product. A 2004 Consortium for Research on Renewable Industrial Materials (CORRIM) study gave scientific validation to the strength of wood as a green building product. In examining building products’ life cycles – from extraction of the raw material to demolition of the building at the end of its long lifespan – CORRIM found that wood was better for the environment than steel or concrete in terms of embodied energy, global warming potential, air emissions, water emissions and solid waste production.
[Show full text]
Wood-Frame House Construction
WOOD-FRAME HOUSE CONSTRUCTION U.S. DEPARTMENT OF AGRICULTURE «FOREST SERVICB»AGRICULTURE HANDBOOK NO. 73 WOOD-FRAME HOUSE CONSTRUCTION By L. O. ANDERSON, Engineer Forest Products Laboratory — Forest Service U. S. DEPARTMENT OF AGRICULTURE Agriculture Handbook No. 73 • Revised July 1970 Slightly revised April 1975 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washincfton, D.C. 20402 Price: $2.60 ACKNOWLEDGMENT Acknowledgment is made to the following members of the Forest Products Laboratory (FPL) for their contributions to this Handbook: John M. Black, for information on painting and finishing; Theodore C. Scheffer, for information on protection against termites and decay; and Herbert W. Eickner, for information on protection against fire. Acknowledgment is also made to Otto C. Heyer (retired) for his part as a co-author of the first edition and to other FPL staff members who have contributed valuable information for this revision. The wood industry has also contributed significantly to many sections of the publication. 11 CONTENTS Page Page Introduction 1 Chapter 6.—Wall Framing 31 Requirements 31 Chapter 1.—Location and Excavation 1 Platform Construction 31 Condition at Site 1 Balloon Construction 33 Placement of the House 3 Window and Door Framing 34 Height of Foundation Walls 3 End-wall Framing 36 Excavation 4 Interior Walls 38 Chapter 2.—Concrete and Masonry 5 Lath Nailers 39 Mixing and Pouring 5 Chapter 7.—Ceiling and Roof Framing 40 Footings 5 Ceiling Joists 40 Draintile 7 Flush Ceiling Framing 42
[Show full text]
Red0037 Redlam LVL Gd 2020.Indd
2.0E RedLam™ LVL Beams, Headers and Columns RedLam™ Laminated Veneer Lumber Engineered to project Consistent quality specifi cations Finished lengths up to 80 feet Consistent strength Revit families available at RedBuilt.com RedBuilt.com 1.866.859.6757 2.0E REDLAM™ LAMINATED VENEER LUMBER RedLam™ LVL can be used as main carrying beams, fl ush beams, headers and wall framing. The RedLam™ LVL manufacturing process removes and disperses the natural defects inherent in wood and produces a product that is strong, dimensionally stable and very reliable. Stronger than Nature RedLam™ LVL Beams and Headers Sizes for every need Our production process creates RedLam™ LVL beams work well RedLam™ LVL is manufactured in wood members with structural in applications throughout the standard widths from 1½" – 3½", in qualities equal to or greater than structure. No matter where they’re lengths up to 80 feet, with depths equivalent sizes of dimensional used, they install quickly with little of 9½" – 24" including wall framing lumber and most glulam beams. or no waste. RedLam™ LVL is very in 2x and 3x sizes from 3½" – 11¼". stable and resists warping, splitting Secondary laminations availble up and shrinking. to 7" widths. 2.0E RedLam™ LVL Available Sizes of Beams Headers & Columns Available Depth Width 3½" 5½" 7¼" 9¼" 9½" 11¼" 117⁄8" 14" 16" 18" 20" 22" 24" Resource Efficiency 1½" xxxx x 1¾" xxxxxxxxxx Consider all of the positive 2½" xxxx x 3½" xxxxxxxxxxxxx attributes of wood when 5¼" xx x xxxxxxx selecting your building material 7" x x xxxxxxx of choice. In addition to its For Rim Board please see the RedBuilt™ Rim Board Specifi cation and Design (TB-401) on redbuilt.com.
[Show full text]
Framing Techniques for Builders: Lessons Learned and Best Practices
Framing Techniques for Builders: Lessons Learned and Best Practices Gary Schweizer, PE Weyerhaeuser August 29, 2017 Disclaimer: This presentation was developed by Weyerhaeuser and is not funded by WoodWorks or the Softwood Lumber Board. “The Wood Products Council” is This course is registered with AIA CES a Registered Provider with The for continuing professional education. American Institute of Architects Continuing Education Systems As such, it does not include content (AIA/CES), Provider #G516. that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of Credit(s) earned on completion handling, using, distributing, or of this course will be reported dealing in any material or product. to AIA CES for AIA members. Certificates of Completion for _______________________________________ both AIA members and non-AIA ____ members are available upon request. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. Course Description This interactive session builds on the idea that builders can improve framing techniques through the lens of others’ challenges and solutions. Recent commercial and multi-family construction hurdles related to issues with building framing schemes will be reviewed through case studies and lessons learned. Best practices that builders can employ to avoid similar issues on their own projects will be discussed, and the audience will be asked to participate and apply practices reviewed during the session. Attendees will leave prepared with design strategies to produce high-performing structures and methodologies that can be considered and applied in construction immediately.
[Show full text]
Simple Picture Framing
You can make it with Simple Pictu re Framing Professional picture framing is expensive. The Triton Workcentre enables you to cut the perfect mitres needed for picture framing, and use of the Router and Jigsaw Table makes it possible to shape your own simple mouldings. This project sheet differs from the others in that no dimensions are provided. Instead, we have provided you with a range of procedural options to guide you in making the picture frame that best meets your needs. 3tD &"u Tool 1. ESSENTIAL 1. Making your picture f rame f rom purchased moulding: Triton Workcentre and your power saw, f itted with a 40 or 60 tooth blade (essential for clean mitre cuts), mitre square or combination square, hammer, nail punch, sandpaper. 2. Shaping your own mouldings: Triton Accessory Router and Jigsaw Table, your router, and a selection of decorative router cutters. 3. A jig for working on end grain is needed if you intend to strengthen the mitres by use of a spline (See the Jig Guide for details of the jig). A small handsaw will also be necessary to trim the splines. 2. USEFUL: Mitre corner clamps to aid assembly, an extension fence mounted onto Face A of the double-sided protractor, and a mitred stop block, to ensure accurate cutting to length. @ Copyright Triton Manufacturing and Design Co. Pty. Ltd. /ssue No. 2, July 1989 Construction Details Material Shoppinq List 1. WOOD Any seasoned, straight-grained timber is suitable. To determine the total length of your frame material, the standard equation is: Twice the length plus twice the width of the picture, plus eight times the width of the moulding.
[Show full text]
ADVANCED FRAMING LUMBER When It's Built Right, It's Oncenter!
ADVANCED FRAMING LUMBER When it's built right, it's onCENTER! QUALITY • SERVICE • VALUE Product Guide At A Glance Advantages of onCENTER Advanced Framing Lumber (AFL) Introduction ……………………… 2 Design Properties ………………… 2 AFL vs. Dimension Lumber Wall Stud Design Example ……… 3 Studs - Vertical Load ……………… 4 • 100% Usability - Wane-free edges, significant defects removed Wall Column Design Example …… 8 Column Notes …………………… 9 • Dimensionally Stable - Less twisting, cracking, and warping Multiple-Ply AFL Fastening ……… 9 Columns - Lateral & Vertical Load … 10 • Reduced Moisture Content - Less shrinkage and a more stable product Lateral Connection Capacities …… 12 Conventional Construction ……… 13 • Straighter - Easier installation and attachment of wall finishes and cabinets Holes & Notches ………………… 13 Wall Design Wind Pressure ……… 14 • Longer Lengths - Up to 32', fewer members to handle Wall Deflection Criteria …………… 15 AFL Jack Stud Capacity…………… 15 • Lifetime Limited Waranty - Provides peace of mind AFL vs. Composite Lumber Visit www.buildonCENTER.com for additional onCENTER product information • Easier to Cut & Nail - Quicker installation, less tool wear, fewer bent nails including laminated flooring. • Lighter - Easier to handle onCENTER AFL is similar to dimension lumber, but with higher design values (shown below). Additionally, performance is more consistent – AFL's patented manufacturing process, combined with comprehensive quality control audited by an independent third party, ensures product reliability. a Design Properties (psi) onCENTER
[Show full text]
Job Purpose Duties and Responsibilities Qualifications Job
Job Title Framing Carpenter Reports to President Job Purpose The Framing Carpenter must have experience in residential homebuilding projects. Duties and Responsibilities The Framing Carpenter holds the following Duties and Responsibilities. Advantage Custom Builders discourages the ‘that’s not my job’ mentality and encourages employees to ‘work outside the box’. Because of this, duties and responsibilities are subject to change pending time of year and demands of other areas. Read, interpret, and understand blueprints, drawings, sketches, and specifications. Must understand math functions and calculations involving fractions. Performs and coordinates the precise cutting, shaping and installation of building materials and lumber needed to build residential buildings. Must be able to lift up to 50 lbs., such as framing lumber, sheets of plywood and other building materials. Assists in construction, installing and repairing structures and fixtures. Maintains safe and clean working environment by complying with procedures, rules and regulations. Performs any and all carpentry needs on site. Erect walls, set floor and roof trusses. Installations of doors, windows, hardware, and specialty components per manufacturer specifications. Fit and install trim items. Ability to travel between multiple job sites within the Iowa City area. Ability to adapt to a flexible work schedule. Works with Framing Lead on deliverables, schedule, and manpower needs. Qualifications The Lead Carpenter should have the following qualifications: High school diploma or GED equivalent. Must have at least 3 years of experience in new home residential construction and remodeling as a carpenter. Must have general carpentry experience. Must have strong attention to detail. Must understand all phases of residential construction. Working knowledge of hand and power tools.
[Show full text]
Typical Single-Story Framing Section
Typical Single-Story Framing Section This information bulletin describes the items how to prepare a typical framing section for single-story residential construction. One or more framing sections will be required as part of plans submitted for approval prior to permit issuance. Additional information on the preparation of plans for a single dwelling unit can be found in “California Building Code”. 1. What is a Framing Section? The California Building Code specifies that, for single-family residential construction, all framing members shall be “anchored, tied and braced so as to develop the strength and rigidity necessary for the purposes for which they are to be used”. A framing section is a cutaway view of the proposed construction that is used to show how these requirements are met. Depending on the design of your project, you may need to include more than one framing section. You must clearly show deviations in your sections wherever they occur. Included in this bulletin are illustrations showing several typical framing sections and details. The illustrations depict conventional wood construction. All framing sections should be cross-referenced on the building plans using the floor, foundation and/or roof framing views. See Figure 1. All framing sections should include enlarged views that detail roof and floor connections as well as lumber and footing sizes. 2. Typical Framing Sections Included in this bulletin are the following typical cross section views: Figure 2 illustrates a framing section, slab floor with ceiling joist Figure 3 illustrates a framing section, slab floor with vaulted ceiling Figure 4 illustrates a framing section, raised floor with ceiling joists Figure 5 illustrates a framing section, slab floor with shed roof 3.
[Show full text]