United Technologies Pratt&Whitney

Total Page:16

File Type:pdf, Size:1020Kb

United Technologies Pratt&Whitney FR-19691-4 VOLUME II 1 DECEMBER 1989 SPACE TRANSPORTATION BOOSTER ENGINE CONFIGURATION STUDY FINAL REPORT (DR4) INCLUDES DESIGN DEFINITION DOCUMENT (DR8) AND ENVIRONMENTAL ANALYSIS (DR10) 31 MARCH 1989 CONTRACT NAS8-36857 MODIFICATION NO.10 Pratt & Whitney Government Engine Business P.O. Box 109800 West Palm Beach, Florida 33410-9600 Prepared for Procurement Office George C. Marshall Space Flight Center National Aeronautics and Space Administration Marshall Space Flight Center, AL 35812 UNITED TECHNOLOGIES PRATT&WHITNEY RI_IQiI/30 Prlnled rn the United Slates of Ame(_ca Pratt & Whitney FR-19691-4 Volume II LiST OF ILLUSTRATIONS (Continued) Figure Page 4.1.1.4-8 STBE Derivative Gas Generator Assembly .................................. 38 4.1.1.5-1 STBE Derivative Gas Generator Regeneratively Cooled Nozzle ........ 40 4.1.1.5-2 STBE Derivative Gas Generator Nozzle Cooling Configuration ........ 41 4.1.1.5-3 STBE Derivative Gas Generator Nozzle Heat Transfer Performance Summary .............................................................................. 42 4.1.i.6-i STBE Derivative Gas Generator Engine Control and Health Monitor System Functional Concept Meets All Requirements With Low-Cost Approach .............................................................................. 44 4.1.1.6-2 Valve Sequence and Thrust Buildup for Engine Start ................... 48 4.1.1.6-3 Valve Schedule and Thrust Transient for Engine Shutdown ........... 49 4.1.1.6-4 Schedule Requirements Feasible With Ganged Valves .................... 50 4.1.1.6-5 Valve Sequencing Accomplished With Timed Logic ....................... 53 4.1.1.7-1 STBE Derivative Gas Generator Engine Assembly -- Side View ..... 55 4.1.1.7-2 STBE Derivative Gas Generator Engine Assembly -- Top View ...... 56 4.1.1.7-3 Internal Ball Strut Ducting Gimbai ........................................... 57 4.1.1.7-4 Externally Pinned Ducting Gimbal ............................................ 58 4.1.1.7-5 External Ball Race Ducting Gimbal ........................................... 58 4.1.1.7-6 STBE Derivative Gas Generator GO 2 HEX Geometry and Performance Data .................................................................. 60 Preliminary FMEA -- Major Engine Sections .............................. 61 STBE Derivative Gas Generator Engine Operating Characteristics at DPL .................................................................................... 85 4.1.2.1-1 STBE Unique Gas Generator Cycle Engine -- 625K Sea Level Thrust ................................................................................. 125 4.1.2.1-2 STBE Unique Gas Generator Cycle Engine -- 750K Sea Level Thrust -- Growth Capability ....................................................127 STBE Unique Gas Generator Characteristicsat Design Power Level 128 Simplified Flow Schematic for STBE Unique Gas Generator Cycle Engine .................................................................................129 Pratt & Whitney FR-19691-4 Volume II LIST OF ILLUSTRATIONS (Continued) F_ure Page 4.1.2.3-1 STBE Unique Gas Generator LO 2 Turbopump ............................. 132 4.1.2.3-2 STBE Unique Gas Generator Fuel Turbopump ............................ 133 4.1.2.3-3 STBE Unique Gas Generator Three-Stage Fuel Pump and a Single Discharge Volute .................................................................... 134 4.1.2.3-4 STBE Unique Gas Generator Two-Stage Fuel Pump and a Single Discharge Volute .................................................................... 134 4.1.2.3-5 STBE Unique Gas Generator Single-Stage Fuel Pump With Boost Pump (Conventional) and a Single Discharge Volute ..................... 135 4.1.2.3-6 STBE Unique Gas Generator Single-Stage Fuel Pump With Boost Pump (Conventional) and a Double Discharge Volute .................... 135 4.1.2.3-7 STBE Unique Gas Generator Two-Stage Fuel Pump With Jet Boost Pump and a Single Discharge Volute .........................................136 4.1.2.3-8 STBE Unique Gas Generator Single-Stage Fuel Pump With Jet Boost Pump and a Single Discharge Volute ................................136 4.1.2.3-9 STBE Unique Gas Generator High-Speed Boost Pump and a Single Discharge Volute ....................................................................137 4.1.2.3-10 STBE Unique Gas Generator High-Speed Boost Pump and a Single Discharge Volute ....................................................................137 4.1.2.4-1 STBE Unique Gas Generator Main Injector ................................139 4.1.2.4-2 STBE Unique Gas Generator Main Injector Element .................... 140 4.1.2.4-3 STBE Unique Gas Generator Main InjectorPattern ..................... 141 4.1.2.4-4 STBE Unique Gas Generator Combustion Chamber ...................... 142 4.1.2.4-5 STBE Unique Gas Generator Chamber Cooling Design Configuration 143 4.1.2.4-6 STBE Unique Gas Generator Chamber Heat Transfer Performance Summary .............................................................................. 144 4.1.2.4-7 STBE Unique Gas Generator Assembly ...................................... 146 4.1.2.4-8 STBE Unique Gas Generator Assembly ...................................... 147 4.1.2.4-9 STBE Unique Gas Generator Assembly Injector Element ............... 148 4.1.2.4-10 STBE Unique Gas Generator Assembly Injector Pattern ................ 149 vi Rlg_II/61 Pratt & Whitney FR-19691-4 Volume II LIST OF ILLUSTRATIONS (Continued) Figure Page 4.1.3.7-3 STBE Common Gas Generator Cycle Engine Operating Characteristics at Normal Power Level ....................................... 203 4.1.3.7-4 STBE Common Gas Generator Cycle Engine Operating Characteristics at Design Power Level ........................................ 204 4.1.4.1-1 STBE LO2/RP-1 Gas Generator Engine Performance Characteristics at Design Power Level ............................................................ 210 4.1.4.2-1 STBE LO2/RP-1 Gas Generator Engine Simplified Flow Schematic 211 4.1.4.3-1 STBE LO2/RP-1 Gas Generator Chamber Design Configuration ...... 214 4.1.4.3-2 STBE LO2/RP-1 Gas Generator Chamber Heat Transfer Performance Summary ............................................................ 215 STBE LO2/RP-1 Gas Generator Nozzle Design Configuration ......... 216 STBE LO2/RP-1 Gas Generator Nozzle Heat Transfer Performance Summary .............................................................................. 217 4.1.4.4-3 STBE LO2/RP-1 Gas Generator Film and Radiation Cooled Nozzle Thermal Summary ................................................................. 219 4.1.4.5-1 STBE LO 2/RP-1 Gas Generator GO 2 HEX Geometry and Performance Data .................................................................. 220 4.1.4.5-2 STBE LO2/RP-1 Gas Generator Engine Flow Schematic at Design Power Level (120%) ............................................................... 222 4.1.4.5-3 STBE LO2/RP-1 Gas Generator Engine Flow Schematic at Normal Power Level {100%) ............................................................... 223 STBE Derivative Split Expander Engines at Design Conditions ...... 229 Simplified Flow Schematic for STBE Derivative Split Expander Cycle Engine ......................................................................... 231 4.2.1.3-1 STBE Derivative Split Expander Oxidizer Turbopump ................... 233 4.2.1.3-2 STBE Derivative Split Expander Fuel Turbopump ........................ 235 4.2.1.3-3 STBE Derivative Split Expander LO 2 Turbopump Critical Speeds Analysis Showing the Pump Pitch Mode of the Rotor at 115% Design Speed (RPM ,, 7615) .................................................... 237 4.2.I.3-4 STBE Derivative Split Expander LO 2 Turbopump Critical Speeds Analysis Showing the Turbine Bounce Mode of the Rotor at 563% Design Speed (RPM - 37196) .................................................. 238 ix Rl_b'gl._l Pratt & Whitney FR- 19691-4 Volume II LIST OF ILLUSTRATIONS (Continued) Figure Page 4.2.1.3-5 STBE Derivative Split Expander Fuel Turbopump CriticalSpeeds Analysis Showing the Pump Pitch Mode of the Rotor at 96% Design Speed (RPM = 10815) ..................................................239 4.2.1.3-6 STBE Derivative Split Expander Fuel Turbopump CriticalSpeeds Analysis Showing the Turbine Bounce Mode of the Rotor at 267% Design Speed (RPM - 30122) ..................................................240 4.2.1.4-1 STBE Derivative Split Expander Main Injector ........................... 243 4.2.1.4-2 STBE Derivative Split Expander Main Injector Element ................ 244 4.2.1.4-3 STBE Derivative Split Expander Main Injector Pattern ................ 245 4.2.1.4-4 STBE Derivative Split Expander Combustion Chamber ................. 246 4.2.1.4-5 STBE Derivative Split Expander Thrust Chamber Cooling Design Configuration ........................................................................ 247 4.2.1.4-6 STBE Derivative Split Expander Thrust Chamber Heat Transfer Performance Summary ............................................................ 248 4.2.1.4-7 STBE Derivative Split Expander Nozzle Cooling Design Configuration ........................................................................249 4.2.1.4-8 STBE Derivative Split Expander Nozzle Heat Transfer Performance Summary .............................................................................. 250 4.2.1.5-1 Engine Control and Health Monitor System Functional Concept Meets All Requirements With Low-Cost Approach ........................ 252 4.2.1.5-2 STBE Derivative Split Expander Start/Shutdown Valve Sequences .. 256 4.2.1.5-3 STBE
Recommended publications
  • RZR-P RZQ-P Service Manual
    SiUS281117 Service Manual RZR-P, RZQ-P(9) Series Cooling Only / Heat Pump R-410A 60Hz SiUS281117 RZR-P, RZQ-P(9) Series Cooling Only / Heat Pump R-410A 60Hz ED Reference For items below, please refer to Engineering Data. For except FTQ No. Item ED No. Page Remarks 1 Specification - Cooling Only EDUS281120 p. 7-13 2 Specification - Heat Pump EDUS281120 p. 14-20 3 Option List EDUS281120 p. 100-102 For FTQ No. Item ED No. Page Remarks 1 Specification - Heat Pump EDUS281008 p. 4 2 Option List EDUS281008 p. 60 1. Safety Considerations.............................................................................v 1.1 Safety Considerations for Repair ............................................................. v 1.2 Safety Considerations for Users ..............................................................vi Part 1 General Information........................................................... 1 1. Model Names and Power Supply............................................................2 1.1 Cooling Only ............................................................................................2 1.2 Heat Pump ...............................................................................................2 2. External Appearance ..............................................................................3 2.1 Indoor Units..............................................................................................3 2.2 Remote Controller....................................................................................4 2.3 Outdoor Units...........................................................................................4
    [Show full text]
  • Examensarbete
    EXAMENSARBETE Tidsättning och övervakning Robin Dorand Lars Karlsson Högskoleexamen Datornätverk Luleå tekniska universitet Institutionen för System- och Rymdteknik Robin Dorand & Lars Karlsson 9 juni 2012 Datornätverk LTU Skellefteå Institutionen för System- och Rymdteknik Sammanfattning Detta examensarbete pågick under fem veckor på SSAB i Luleå och behandlar två uppgifter. Den första uppgiften gick ut på att forska om tid för att på bästa sätt kunna tidsätta nätverksutrustning samt övervakningsplattformar på SSAB. Den andra uppgiften gick ut på att undersöka krav samt upplägg för övervakningsplattformen SCOM. För att kunna synkronisera tid används i huvudsak tre protokoll: NTP, SNTP samt PTP. De vanligaste teknikerna för att synkronisera tid är via internet, GPS, radiokommunikation samt manuell tidsättning. Genom att samla in data jämfördes olika scenarion och utrustning konfigurerades. Utifrån undersökningar framkom det att den lämpligaste lösningen var att via NTP protokollet synkronisera utrustningen mot en lokal server. Servern är i sin tur kopplad mot en GPS mottagare. För framtida implementeringar föreslogs ny kraftigare hårdvara med stöd för redundans. SCOM är en modulbaserad övervakning och hanterings- plattform som utvecklats av Microsoft. Med hjälp av SNMP protokollet tillhandahålls hjälpmedel för att kommunicera mellan SCOM och olika nätverksutrustningar. Undersökningen kring övervakningsplattformen SCOM bestod av samtal med personal på SSAB angående önskemål samt synpunkter på utformning. Utifrån informationen togs ett upplägg fram som bestod av diagram för nätverksutrustning samt kartbilder för anläggningens områden. Överblicksbilder samt diagram sammanställdes i SCOM för att skapa ett lättnavigerat och pedagogiskt system för övervakning. Abstract This thesis project lasted during five weeks at SSAB in Luleå and dealt with two tasks. The first task was to research the best possible way to synchronize network equipment and monitoring platforms at SSAB.
    [Show full text]
  • Khz Time(UTC) Days ITU Station Lng Target Remarks 16.4 0000-2400
    kHz Time(UTC) Days ITU Station Lng Target Remarks 16.4 0000-2400 NOR JXN Marine Norway NEu no 18.2 0000-2400 IND VTX Indian Navy SAs v 18.3 0000-2400 F HWU French Navy WEu wu 19.6 0000-2400 G GQD Anthorn WEu an 19.8 0000-2400 AUS NWC US/Australian Navy Oc ex 20.5 0741-0747 BLR RJH69 Molodechno #NOME? EEu mo 20.5 0441-0447 KGZ RJH66 Bishkek #NOME? CAs bk 20.5 1041-1047 KGZ RJH66 Bishkek #NOME? CAs bk 20.5 1131-1141 RUS RJH63 Krasnodar #NOME? EEu kd 20.5 0941-0947 RUS RJH77 Arkhangelsk #NOME? EEu ak 20.5 0541-0547 RUS RJH99 Nizhni Novgorod #NOME? EEu nn 20.9 0000-2400 F HWU French Navy WEu wu 21.4 0000-2400 HWA NPM US Navy Oc L 21.7 0000-2400 F HWU French Navy WEu wu 23 0735-0741 BLR RJH69 Molodechno #NOME? EEu mo 23 0435-0441 KGZ RJH66 Bishkek #NOME? CAs bk 23 1035-1041 KGZ RJH66 Bishkek #NOME? CAs bk 23 1126-1131 RUS RJH63 Krasnodar #NOME? EEu kd 23 0935-0941 RUS RJH77 Arkhangelsk #NOME? EEu ak 23 0535-0541 RUS RJH99 Nizhni Novgorod #NOME? EEu nn 23.4 0000-2400 D DHO38 German Navy Eu rf 23.4 0000-2400 HWA NPM US Navy Oc L 24 0000-2400 USA NAA US Navy Cutler NAO cu 24.8 0000-2400 USA NLK US Navy Jim Creek NAO jc 25 0700-0725 BLR RJH69 Molodechno #NOME? EEu mo 25 0400-0425 KGZ RJH66 Bishkek #NOME? CAs bk 25 1000-1025 KGZ RJH66 Bishkek #NOME? CAs bk 25 1100-1120 RUS RJH63 Krasnodar #NOME? EEu kd 25 0900-0925 RUS RJH77 Arkhangelsk #NOME? EEu ak 25 0500-0525 RUS RJH99 Nizhni Novgorod #NOME? EEu nn 25.1 0725-0730 BLR RJH69 Molodechno #NOME? EEu mo 25.1 0425-0430 KGZ RJH66 Bishkek #NOME? CAs bk 25.1 1025-1030 KGZ RJH66 Bishkek #NOME? CAs bk 25.1
    [Show full text]
  • Transitions in the Bottomonium System
    Annual Reviews www.annualreviews.org/aronline Annu. Rev. Nucl. Part. Sci. 1993.43:333-78 Copyright© 1993 by AnnualReviews lnc. All rights reserved UPSILON SPECTROSCOPY: Transitions in the Bottomonium System D. Besson Departmen~t of Physics, University of Kansas, Lawrence, Kansas 66045 T. Skwarnicki Departmentt of Physics, Southern Methodist University, Dallas, Texas 75275 KEY WORDS: potential models,radiative transitions, hadronic transitions, multiple models CONTENTS 1. INTRODUCTION................................................... 334 1.1 Bound States and Fundamental Forces in Nature ................... 334 1.2 Discovery of the Y System ........................................ 335 1.3 The Quarkonium Model .......................................... 335 1.4 Scope of This Article ............................................. 338 2. STORAGE RINGS AND DETECTORS............................... 338 3. COUPLINGTO LEPTONPAIRS ..................................... 339 3.1 Measurement of Y Masses and Their Leptonic Widths ............... 339 3.2 Measurement of Leptonic Branching Ratios ........................ 341 3.3 Derivation of the Total Widths of the Y Resonances ................. 342 3.4 Comparison with Theoretical Predictions ........................... 342 4. MEASUREMENTSOF RADIATIVE TRANSITIONS .................. 343 4.1 Radiative Transitions from the Y(2S) .............................. 344 4.2 Radiative Transitions from the Y(3S) .............................. 346 5. COMPARISON WITH POTENTIAL MODELS ........................ 348 5.1 Excitation
    [Show full text]
  • STANDARD FREQUENCY and TIME SIGNAL STATIONS on LF and HF Originally Published Between October 1997 and July 1998
    WUN ARCHIVE STANDARD FREQUENCY AND TIME SIGNAL STATIONS ON LF AND HF Originally published between October 1997 and July 1998 Standard frequency and time signal stations on LF and HF, pt.1 Welcome to the first part of a series about Time and Frequency Stations on LF and HF. This month you'll find a frequency list and a general introduction to these stations. During the next few months, we will highlight a bunch of the stations. Special thanks to Klaus Betke for his research, Stan Skalsky, Kevin Carey, Terry Krey, and Dave Mills. Also thanks to the Institute of Meteorology for Time and Space (Russia), BIPM Bureau International des Poids et Mesures (France) and NIST National Institute of Standards and Technology (USA) for their time, help and the huge amount of info. Introduction Exact time intervals are needed for navigation and surveying, in science and engineering. In the past, HF radio signals were often the only way to calibrate a clock onboard a ship or a frequency standard in a laboratory. In the age of GPS satellites and portable atomic clocks, however, time and frequency distribution via HF has become largely obsolete. New applications like network synchronization require an accuracy that cannot be met by HF signals. Moreover, the transmission scheme of most stations and the peculiarity of shortwave propagation make these signals less suitable for automatic, unattended reception. Consequently, many time signal stations have disappeared. In former times, coastal radio stations also transmitted time signals on their CW frequencies. Although numerous of these services to mariners are still listed in, you will hardly find an active one.
    [Show full text]
  • 4000126063/18/NL/MP NAVISP-EL3-001 D7 Outline
    1 4000126063/18/NL/MP NAVISP-EL3-001 D7 Outline Development Plan 28th February 2020 MarRINav – 4000126063/18/NL/MP – 2020-02-28 2 D7 Outline Development Plan v2.0 MarRINav is a project delivered on behalf of the European Space Agency MarRINav – 4000126063/18/NL/MP – 2020-02-28 3 D7 Outline Development Plan v2.0 MarRINav – Maritime Resilience and Integrity in Navigation Work Package 4 Outline Development Plan Version Date Authors Reason for change 1.0 13.12.2019 M Fairbanks Initial version for release 2.0 28.02.2020 M Fairbanks Response to RIDS © NLA International Limited 2020 The copyright in this document is vested in NLA International Limited. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by any means electronic, mechanical, photocopying or otherwise, either with the prior permission of NLA International Limited or in accordance with the terms of ESA Contract No. 4000126063/18/NL/MP. MarRINav – 4000126063/18/NL/MP – 2020-02-28 4 D7 Outline Development Plan v2.0 Document Information Client ESA MarRINav – Maritime Resilience and Integrity in Navigation Project Title 4000126063/18/NL/MP NAVISP-EL3-001 Deliverable Number D7 Report Title WP4 Outline Development Plan Report Version V2.0 Report Version Date 28th February 2020 Name: Dr Michael Fairbanks Lead Author(s) Organisation: Taylor Airey Limited George Shaw (GLA) Contributing Author (s) Dr Paul Wright Richard Greaves Project Manager [email protected] NLA International Ltd 1. Client Circulation 2. Project Files File Name 20 02 28 D7 Outline Development Plan v2.0.docx File Location Googledrive/Dropbox MarRINav – 4000126063/18/NL/MP – 2020-02-28 5 D7 Outline Development Plan v2.0 Summary MarRINav Work Package 4 (WP4) has elsewhere described [1] a conceptual architecture to provide resilient Positioning Navigation and Timing (PNT) capability for UK maritime critical national infrastructure (CNI).
    [Show full text]
  • Time on the Move
    EDITORIAL Vol.1 No.5 May 2007 www.nature.com/naturephotonics Time on the move Optical clocks promise new standards in the measurement of time. To ensure accuracy, however, different clocks must be compared, even if they are on opposite sides of the planet. On 1 April 2007, the source of the an advanced technology with a vast radio-frequency signal that has ensured network already available. The difficulty that the United Kingdom has ticked is that the operation wavelengths of to the same clock for the past 80 years most optical clocks are incompatible was moved from central England to with the transparency window of optical a new home on the northwest coast. fibres. What is necessary is to transfer Before railway networks spread across the stability to a wavelength suitable for the country, variations in local time transmission. The system constructed were made largely irrelevant by long and tested by the NIST team consists of a travelling times. However, during the number of phase-stabilized continuous- 1840s and 1850s, as they expanded, the wave lasers, a 750-m closed-ring network train companies carried the time in of erbium fibre and frequency combs London to local stations, and this was to shift the stability of the reference eventually adopted by public clocks. frequency to a second wavelength Legislation formally imposed Greenwich GPS. The stability of atomic clocks scales between 500 nm and 2 μm. The set- Mean Time (GMT) across the UK with oscillator frequency, and this has led up is just a prototype at present, and in 1880.
    [Show full text]
  • Timestamping Smart Ledgers Comparable, Universal, Traceable, Immune
    Timestamping Smart Ledgers Comparable, Universal, Traceable, Immune June 2018 Timestamping Smart Ledgers Comparable, Universal, Traceable, Immune Timestamping Smart Ledgers Comparable, Universal, Traceable, Immune June 2018 Sam Carter Financial Sector Researcher and Quant Developer Distributed Futures 1 /57 © Z/Yen Group, 2018 Timestamping Smart Ledgers Comparable, Universal, Traceable, Immune Foreword What time is it? When did something happen? When is an event expected? How much time separates two events? Which came first? These questions arise in everyday life and in every kind of discipline. For centuries clockmakers have striven to improve ways to measure time and to achieve ever higher degrees of precision, to meet the demand for its closer and closer estimation – and by achieving that improvement have enabled ever more exacting applications of timekeeping, as the measurement of time has become almost unimaginably precise. Over that period changes in technology have also allowed a uniform time to be widely known to an accuracy not just to the hour but to the minute and then to the second and within even smaller tolerances, in public, in our houses and places of work, and carried on our persons. Centralised time synchronises our local time, and sub-microsecond accuracy routinely enables satellite navigation – relying on the connection of ‘when’ with ‘where’ by the speed of light. In recent years, computing has transformed the speed of financial trading, and following this, the recording of trades – and in particular when they took place – has become far more stringently regulated, with timestamping to the microsecond required in some areas. The story of John Harrison and his marine timekeepers is an example of how an eighteenth-century authority, the Board of Longitude, required demonstration that his new technology was sufficiently accurate and fit for purpose, navigation at sea.
    [Show full text]
  • WATER TREATMENT SYSTEM, OPERABLE UNIT ONE DUBLIN TCE SITE BUCKS COUNTY, PENNSYLVANIA Work Assignment No
    FINAL DESIGN DOCUMENTS: WATER TREATMENT SYSTEM, OPERABLE UNIT ONE DUBLIN TCE SITE BUCKS COUNTY, PENNSYLVANIA Work Assignment No. 90-47-3NS3 Contract No. 68-W8-0090 March 1995 Prepared for U.S. Environmental Protection Agency Region III 841 Chestnut Street Philadelphia, Pennsylvania 19107 Prepared by CH2M HILL Reston, Virginia WDCR846/024.WP5 ' n SRGGOQO Preface This report contains the following design documents: • Engineer's Report • Design Plans (bound under separate cover) • Design Specifications WDCR848/023.WP5 flftOOOOO:2 ;,g|ft^^: • • "•'>•',?':"-"'l. • ' ' " ENGINEER'S REPORT Final Water Treatment System Operable Unit One Dublin TCE Site Bucks County Pennsylvania Prepared for the U.S. Environmental Protection Agency Region HI ..V-, -, 841 Chestnut Street % - ; Philadelphia, Pennsylvania 19107 Prepared by OMH'ILL Reston, Virginia March 1995 WDCR846/025.WP5/1 AR000003 This design document has been prepared under the direction of a Registered Professional Engineer. WDCR846/025.WP5/2 1ROOOOOI* CONTENTS Section Page Acronyms and Abbreviations 1.0 Introduction .................................... 1-1 2.0 Site Background ................................. 2-1 3.0 Existing Municipal Water Supply System .................. 3-1 3.1 Overview .................................. 3-1 3.2 Water Supply Wells and Well Houses ................ 3-1 3.2.1 Well Pumps ......................... 3-1 3.2.2 Disinfection Facilities .................... 3-3 3.2.3 Well Houses ......................... 3-3 3.3 Distribution Network: Existing and Proposed ........... 3-3 3.4 Elevated Tank Reservoir ........................ 3-5 4.0 Design Criteria ................................... 4-1 4.1 Overview ................................. 4-1 4.2 Design Codes and Standards ...................... 4-1 4.2.1 Federal Codes ........................ 4-1 4.2.2 Pennsylvania and Bucks County Codes ......... 4-1 4.2.3 Dublin Borough Codes ..................
    [Show full text]
  • Line Positions and Data Formats
    unifit FOR WINDOWSl Line Positions and Data Formats Version 2021 Ronald Hesse Unifit for Windows Data Formats Version 2021 Scientific Software GmbH Henricistr. 31 D-04177 Leipzig Germany 4 Line positions 1 Line positions 5 Content 1 Line positions ................................................................................................................................. 8 2 Auger Parameters ........................................................................................................................ 48 3 Experimental Files ....................................................................................................................... 53 3.1 XPS Data ......................................................................................................................... 53 3.1.1 ESCALAB Eclipse (*.TAP;*.TXT) ................................................................................ 53 3.1.2 ESCALB/K-ALPHA Avantage (*.AVG) ........................................................................ 61 3.1.3 ESCA3 (*.TAP)............................................................................................................... 63 3.1.4 BESSY (*.*) .................................................................................................................... 64 3.1.5 VSI (*.GPH) .................................................................................................................... 65 3.1.6 HHUD (*.DAT) ..............................................................................................................
    [Show full text]
  • UTC Traceable Time for the Financial Sector Using PTP
    UTC Traceable Time for the Financial Sector using PTP Elizabeth Laier English Overview • Introduction to the NPLTime® service Financial sector timing requirements NPL solution • Tests at NPL Loopback system Service monitoring • Trial of NPLTime® Results • Conclusions Clocks & time dissemination at NPL Primary frequency standard Caesium fountain CsF2 Optical clocks Sr, Sr+ and Yb+ Time Scale: The Time from NPL: • 4 active hydrogen masers • MSF 60kHz radio signal • 5 caesium clocks • NTP • GPS common view • NPLTime® Introduction to the NPLTime® service NPLTime® takes advantage of the UK national timescale UTC (NPL) to disseminate a time signal via fibre optic link directly to customers in the city of London IEEE 1588 v2 (PTP) is used to provide end users with resilient and certified timing and synchronisation of systems to a high level of accuracy Time signal is independent of GPS SLA is 1 µs to UTC (NPL) with 99.9% availability Financial sector requirements • Core requirements Common clock Traceable Resilient Secure • Functional requirements Timestamping Synchronisation Latency monitoring Network performance Audit requirements NPLTime® benefits • Risk mitigation • Simplicity of implementation • Maximises confidence in data timing • Maximises benefit realisation of localised PTP infrastructure upgrades • Provides both absolute time and sync across implementations • NPLTime® SLA available everywhere NPL-Telehouse fibre link PTP over 74km dark fibre pair HM2 Primary Primary clock 1 PPS Primary GM PTP PTP TC TC TC Backup GM 1 PPS Secondary clock HM4 Secondary NPLTime® CsDU Caesium Clock Disciplining Unit: PXI chassis + Timing card + Cs clock Holdover solution at Telehouse hub: Failover to Cs clock in the event of fibre failure Records the 1PPS time difference between NPLTime® Primary clock and the Cs clock Calculates and writes a frequency adjustment to the Cs clock to correct the time offset Time output resolution is limited by the PTP time server.
    [Show full text]
  • TIME from NPL Forever Accurate Note: the WEEE Symbol Indicates That Waste Electrical and Electronic Equipment Should Not Be Treated As Normal Household Waste
    When the signal icon on the clock flashes, this indicates that the clock is receiving the radio signals from the Germany (DCF) or UK (MSF) radio station (this depends on which version you purchase). When the time code is received the signal icon turns on. If the signal icon does not appear at all and the time is not yet set, please take note of the following should just be: • We recommend keeping the minimum distance of 8 feet from any interfering source like TV’s computer monitors. • Within concrete rooms (basements, superstructures, tower block, office buildings, etc.), the received signal will be weakened. In extreme cases, the unit should be placed close to a window and/or point the clock face AP004 - Instruction Manual or back towards the Frankfurt, Germany (DCF77) / Cumbria, England (MSF). The Radio-Controlled Clock • Avoid placing the unit on or next to metal surfaces. With the Radio-Controlled Clock, you can have the most accurate time within the UK. It can receive the • Do not start reception whilst moving such as in a vehicle or on a train. time signal transmitted by VT Communications of United Kingdom, which is regulated by atomic clock • During the night, the atmospheric disturbances are usually less severe and reception is possible in most and in average deviates less than 1 second in 10 million years. VT Communications transmit the time cases. A single daily reception is adequate to keep the accuracy within 1 second. signal (MSF 60kHz) continuously from Anthorn at latitude 54°55′N and longitude 3°15′W.
    [Show full text]