New Thames Barge £ 590,420 Raised to Date £315,000 Phase 1 Target To
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
'British Small Craft': the Cultural Geographies of Mid-Twentieth
‘British Small Craft’: the cultural geographies of mid-twentieth century technology and display James Lyon Fenner BA MA Thesis submitted to the University of Nottingham for the degree of Doctor of Philosophy August 2014 Abstract The British Small Craft display, installed in 1963 as part of the Science Museum’s new Sailing Ships Gallery, comprised of a sequence of twenty showcases containing models of British boats—including fishing boats such as luggers, coracles, and cobles— arranged primarily by geographical region. The brainchild of the Keeper William Thomas O’Dea, the nautical themed gallery was complete with an ocean liner deck and bridge mezzanine central display area. It contained marine engines and navigational equipment in addition to the numerous varieties of international historical ship and boat models. Many of the British Small Craft displays included accessory models and landscape settings, with human figures and painted backdrops. The majority of the models were acquired by the museum during the interwar period, with staff actively pursuing model makers and local experts on information, plans and the miniature recreation of numerous regional boat types. Under the curatorship supervision of Geoffrey Swinford Laird Clowes this culminated in the temporary ‘British Fishing Boats’ Exhibition in the summer of 1936. However the earliest models dated back even further with several originating from the Victorian South Kensington Museum collections, appearing in the International Fisheries Exhibition of 1883. 1 With the closure and removal of the Shipping Gallery in late 2012, the aim of this project is to produce a reflective historical and cultural geographical account of these British Small Craft displays held within the Science Museum. -
6 X 10.5 Long Title.P65
Cambridge University Press 978-0-521-12562-8 - Archaeology and the Social History of Ships, 2nd Edition Richard A. Gould Index More information general index Abandoned Shipwreck Act of 1987, Birka, Sweden, 182–183 343–345 Blackwall Frigates, 304 Actian rams, 144 blockade-runners (Confederate), 265, Aeolian Islands, Italy, 153 269, 271–273, 276–277, 280 Aland˚ Islands, Finland, 178–179, bombardeta cannon, 218–220, 226, 186–187 243 Alexandria, Egypt, 146, 319, 321, 335 Bouguer, Pierre, 75 alternative archaeologies, 354 Boutakov, Admiral Grigorie, 289 amphora, 49, 51, 128–129, 131–132, Braudel, Fernand, 155–156, 173 136, 142, 145–148 Brouwer, Hendrik, 239 Anaconda Plan, 270, 277, 310 buoyancy, center of, 74 archery (at sea), 137, 219, 224–225, Bukit Tengkorak, Borneo, 170 228 bulk cargoes, 4, 76–77, 159, 163, 185, arithmetic mean center (AMC), 39–40 206–207, 248–249 arms race, early modern, 285–286 association, physical Cabot, John, 211 primary, 54, 57–59 Caesarea Maritima, Israel, 320, 329 secondary, 58–60 captain’s walk (see also widow’s walk), tertiary, 60 267 autonomous underwater vehicles caravel, 210, 212–213, 218 (AUVs), 2, 49, 346 caravela latina, 210 caravela redonda, 210 baidarka, 93, 95, 99 cargo-preference trade, 6 Baker, Matthew, 70 carrack, 191, 195, 204, 216, 223, 246 Banda, Indonesia, 239 carvel construction, 191, 200 barratry, 264 Catherine of Aragon, 225 Bass, George F., 2, 20, 26, 50–52, 81, Cederlund, Carl Olof, 54, 61, 234–236 127–128, 130, 155–157, Celtic tradition in shipbuilding, 114 173–174, 176–177 cerbatana cannon, 219 Bayeux Tapestry, 180–181, 207 chaos theory (of underwater Beardman jug, 242 archaeology), 2–3 © in this web service Cambridge University Press www.cambridge.org Cambridge University Press 978-0-521-12562-8 - Archaeology and the Social History of Ships, 2nd Edition Richard A. -
Sailing Course Materials Overview
SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home. -
National Sonata Association Newsletter
Sonata News Natiii o n a lll S o n a t a A s s o c iii a t iii o n N e w s lll e t t e r Discovery of the French Canals In 1492 Christopher Columbus stood at the helm The recommended procedure for a channel of the Santa Maria and guided the cumbersome crossing to Boulogne is not to 'follow a ferry' but craft over the treacherous Atlantic ocean to grasp a after all they were going in the right direction! Summer 97 place in history as the man who discovered the The real hazard is judging the pace of the endless Americas. lines of monsters in the shipping lanes and Some 500 years later a somewhat less ambitious deciding where to skip across. However this was but equally hazardous voyage was undertaken by successfully accomplished without loss and the the crew of the Hunter Sonata C Sharp... discovery boys at Lloyds heaved a sigh of relief, locked of the French canals ! away the Lutine bell and paid themselves a hefty bonus. There was a great deal of mutual The adventure began with a long, slow trip down backslapping, self congratulation and gratuitous the motorway from the sheltered waters of drinking that night as the crew enjoyed a well Windermere to the South coast. There, after a earned run ashore with the boat safely alongside a quick and completely uncontrolled launch down a pontoon in Boulogne harbour. near vertical slipway, the boat entered the briny waters of Chichester harbour. After rigging the Forty miles from Boulogne in northern France boat and arranging hasty life assurance polices for lies St Valery-sur-Somme, a treacherous but the crew of four, C Sharp cautiously nosed her pretty harbour entered via an eight mile shifting way into a world of salt water, tides, weather channel on the top two hours of the tide. -
2003 INTERNATIONAL OPTIMIST CLASS RULES Authority*: International Sailing Federation I S a F
2003 INTERNATIONAL OPTIMIST CLASS RULES Authority*: International Sailing Federation I S A F For Class Rule updates and other Class Information see: * The ISAF is not a National Authority as described in these rules www.optiworld.org CONTENTS Page Rule 2 1 GENERAL 2 2. ADMINISTRATION 2 2.1 English language 2 2.2 Builders 3 2.3 International Class Fee 3 2.4 Registration and measurement certificate 4 2.5 Measurement 4 2.6 Measurement instructions 5 2.7 Identification marks 6 2.8 Advertising Throat point 6 3 CONSTRUCTION AND MEASUREMENT RULES 6 3.1 General 1994 International Yacht Racing Union 6 3.2 Hull 6 3.2.1 Materials - GRP 7 3.2.2 Hull measurement rules 10 3.2.3 Hull construction details - GRP 12 3.2.4 Hull construction details - Wood and Wood/Epoxy (See Appendix A, p 24) 12 3.2.5 Not used 12 3.2.6 Fittings 13 3.2.7 Buoyancy 14 3.2.8 Weight No part of the luff measurement band #3 shall extend above the lower edge of mast-band #1 or below the upper edge of mast-band #2. 14 3.3 Daggerboard 14 3.3.1 Materials Max. 635 Max. 14 3.3.2 Shape 15 3.4 Rudder and Tiller Min. 610 Min. 15 3.4.1 Materials #2 16 3.4.2 Shape #1 16 3.4.4 Definition of Rudder elements POSITIONING, LUFF MEASUREMENT BAND Rules 6.5.4; 6.6.3.1; 3.5.2.7 17 3.5 Spars 17 3.5.1 Materials Min. -
The International Flying Dutchman Class Book
THE INTERNATIONAL FLYING DUTCHMAN CLASS BOOK www.sailfd.org 1 2 Preface and acknowledgements for the “FLYING DUTCHMAN CLASS BOOK” by Alberto Barenghi, IFDCO President The Class Book is a basic and elegant instrument to show and testify the FD history, the Class life and all the people who have contributed to the development and the promotion of the “ultimate sailing dinghy”. Its contents show the development, charm and beauty of FD sailing; with a review of events, trophies, results and the role past champions . Included are the IFDCO Foundation Rules and its byelaws which describe how the structure of the Class operate . Moreover, 2002 was the 50th Anniversary of the FD birth: 50 years of technical deve- lopment, success and fame all over the world and of Class life is a particular event. This new edition of the Class Book is a good chance to celebrate the jubilee, to represent the FD evolution and the future prospects in the third millennium. The Class Book intends to charm and induce us to know and to be involved in the Class life. Please, let me assent to remember and to express my admiration for Conrad Gulcher: if we sail, love FD and enjoyed for more than 50 years, it is because Conrad conceived such a wonderful dinghy and realized his dream, launching FD in 1952. Conrad, looked to the future with an excellent far-sightedness, conceived a “high-perfor- mance dinghy”, which still represents a model of technologic development, fashionable 3 water-line, low minimum hull weight and performance . Conrad ‘s approach to a continuing development of FD, with regard to materials, fitting and rigging evolution, was basic for the FD success. -
Herreshoff Collection Guide [PDF]
Guide to The Haffenreffer-Herreshoff Collection The Design Records of The Herreshoff Manufacturing Company Bristol, Rhode Island The Francis Russell Hart Nautical Collection Kurt Hasselbalch Frances Overcash & Angela Reddin The Francis Russell Hart Nautical Collections MIT Museum Cambridge, Massachusetts © 1997 Massachusetts Institute of Technology All rights reserved. Published by The MIT Museum 265 Massachusetts Avenue Cambridge, Massachusetts 02139 TABLE OF CONTENTS Acknowledgments 3 Introduction 5 Historical Sketch 6 Scope and Content 8 Series Listing 10 Series Description I: Catalog Cards 11 Series Description II: Casting Cards (pattern use records) 12 Series Description III: HMCo Construction Record 13 Series Description IV: Offset Booklets 14 Series Description V: Drawings 26 Series Description VI: Technical and Business Records 38 Series Description VII: Half-Hull Models 55 Series Description VIII: Historic Microfilm 56 Description of Database 58 2 Acknowledgments The Haffenreffer-Herreshoff Project and this guide were made possible by generous private donations. Major funding for the Haffenreffer-Herreshoff Project was received from the Haffenreffer Family Fund, Mr. and Mrs. J. Philip Lee, Joel White (MIT class of 1954) and John Lednicky (MIT class of 1944). We are most grateful for their support. This guide is dedicated to the project donors, and to their belief in making material culture more accessible. We also acknowledge the advice and encouragement given by Maynard Bray, the donors and many other friends and colleagues. Ellen Stone, Manager of the Ships Plans Collection at Mystic Seaport Museum provided valuable cataloging advice. Ben Fuller also provided helpful consultation in organizing database structure. Lastly, I would like to acknowledge the excellent work accomplished by the three individuals who cataloged and processed the entire Haffenreffer-Herrehsoff Collection. -
APC Logistics 2015 Brisbane to Gladstone Special Edition
APCAPC LogisticsLogistics 20152015 BrisbaneBrisbane toto GladstoneGladstone SpecialSpecial EditionEdition MULTIHULL YACHT CLUB QUEENSLAND: PO BOX 178, WYNNUM. Q. 4178 Volume 50 Number 4 OMR, Performance Handicap and Line Honours winner of the APC Logistics 2015 Brisbane to Gladstone - Photo Julie Geldard Commodore’s Comment By Bruce Wieland Congratulations to the crew of Morticia who won the rare treble of Line Honours, first OMR and first PCF. They become the 5th yacht in the history of the race to do this. Previous yachts to win the treble include Shotover (H Raven—1990), XL2 (P Nudd—1993), Flat Chat (J Morris— 2002) and Bulletproof (S Gralow—2009). Congratulations also to the place getters in all categories. MYCQ is grateful for the support from all competitors who made the commitment of time and money to race this year, particularly by those yachts not based locally. The Brisbane to Gladstone Multihull Race remains the most prestigious multihull race in Australia, and as Commodore, I am very aware of its historical place in the yachting world. The MYCQ Race Committee is committed to keeping this race at the forefront of multihull racing. Exciting events such as the last America’s Cup, and the Extreme Sailing Circuit have increased awareness of multihulls generally, and with such innovations as the trackers, and live video streaming, the Brisbane to Gladstone race has now become a spectator sport. The following reports from the yachts makes interesting reading, and the race analysis provided by the trackers no doubt will be absorbed by the navigators for future Brisbane to Gladstone Races. There will be videos and fun reports at the next general meeting to be held at the clubhouse on Thursday 7th May. -
The Dynarig: Efficient, Safe and High-Performance Sailing System for Tomorrow’S Sailing Superyachts
THE DYNARIG: EFFICIENT, SAFE AND HIGH-PERFORMANCE SAILING SYSTEM FOR TOMORROW’S SAILING SUPERYACHTS innovative solutions in composites to meet a complex array of design challenges UNIQUE CHALLENGES: ENGINEERED Magma Structures is a global leader in composite technology, providing world-class structural engineering expertise and flexible manufacturing resources and processes to deliver high-performance solutions for unique and challenging requirements. PAGE 2 PAGE 3 UNIQUE CHALLENGES: ENGINEERED UNIQUE CHALLENGES: ENGINEERED INTRODUCING THE DYNARIG A safe, high-performance sailing system, delivering ease of handling, reliability and efficiency, even when sailing at 18 knots. The DyanRig addresses key challenges from escalated loads and unprecedented scale, making it especially Private sailing yachts are increasing in size year by year. Crew numbers should be minimal and the crew must be The Maltese Falcon, suitable for two and three masted performance cruising Today’s sailing superyachts are approaching, and in some able to perform all sailing manoeuvres with ease and cases surpassing, the size of the major sailing vessels of at short notice. Large loads, flogging sails and moving launched in 2006, has yachts from 60m to 110m in length. the late 18th and early 19th century; huge vessels that deck lines should be avoided. The pleasure of a sailing carried rigs developed over years that distributed the sail vessel underway, powered up in a seaway, should not be proved that the DynaRig area into reasonable portions enabling them to be sailed tempered by any concerns of safety and ease of handling efficiently by relatively small crews. by the crew or guests on board. is a highly efficient, Today, many of the large yachts recently built or currently The DynaRig meets all of these requirements; its sails can reliable, practical, in build have rigs based on scaling up sailing rigs that be deployed and furled away with considerable ease, the owe their origin to dinghies and small sailing vessels. -
Guide to the William A. Baker Collection
Guide to The William A. Baker Collection His Designs and Research Files 1925-1991 The Francis Russell Hart Nautical Collections of MIT Museum Kurt Hasselbalch and Kara Schneiderman © 1991 Massachusetts Institute of Technology T H E W I L L I A M A . B A K E R C O L L E C T I O N Papers, 1925-1991 First Donation Size: 36 document boxes Processed: October 1991 583 plans By: Kara Schneiderman 9 three-ring binders 3 photograph books 4 small boxes 3 oversized boxes 6 slide trays 1 3x5 card filing box Second Donation Size: 2 Paige boxes (99 folders) Processed: August 1992 20 scrapbooks By: Kara Schneiderman 1 box of memorabilia 1 portfolio 12 oversize photographs 2 slide trays Access The collection is unrestricted. Acquisition The materials from the first donation were given to the Hart Nautical Collections by Mrs. Ruth S. Baker. The materials from the second donation were given to the Hart Nautical Collections by the estate of Mrs. Ruth S. Baker. Copyright Requests for permission to publish material or use plans from this collection should be discussed with the Curator of the Hart Nautical Collections. Processing Processing of this collection was made possible through a grant from Mrs. Ruth S. Baker. 2 Guide to The William A. Baker Collection T A B L E O F C O N T E N T S Biographical Sketch ..............................................................................................................4 Scope and Content Note .......................................................................................................5 Series Listing -
Appendix a Cultural Impact Assessment
APPENDIX A CULTURAL IMPACT ASSESSMENT Volume II: Final Environmental Assessment CULTURAL IMPACT ASSESSMENT Papahānaumokuākea Marine National Monument Management Plan November, 2008 STATE OF HAWAI‘I DEPARTMENT OF LAND AND NATURAL RESOURCES December 2008 Appendix A Volume II: Final Environmental Assessment TABLE OF CONTENTS 1.0 INTRODUCTION..............................................................................................................3 1.1 Project Background .....................................................................................................3 1.2 Scope of Work ..............................................................................................................4 1.3 Physical and Natural Setting.......................................................................................4 2.0 TRADITIONAL AND HISTORIC BACKGROUND ....................................................8 2.1 Cultural Setting ............................................................................................................8 2.2 Historical Period ........................................................................................................11 2.3 Contemporary Connections to the Northwestern Hawaiian Islands ....................12 2.4 Cultural Access for Native Hawaiian Practices ......................................................13 3.0 MONUMENT MANAGEMENT PLAN ........................................................................13 4.0 ARCHAEOLOGICAL BACKGROUND ......................................................................16 -
Building a Model of a Thames Barge
Building a model of a Thames Barge Stage 1 : Reading the instructions The model which I purchased is of the Will Everard, a steel-hulled barge built in the 1920's, one of a range of laser-cut kits from Billing's Boats. The kit comprised several sheets of laser-cut ply, a bundle of strip wood, a packet of spars, cloth for the sails, a plastic moulding with various items of deck furniture and a packet of tiny plastic and brass parts for the rigging, deck winches etc. In addition there was a sail plan and two detailed numbered plans of the deck and rigging. The instruction book, written in eight languages, relies almost entirely on exploded diagrams to explain how the model fits together. Little if any advice is given to the novice as to the techniques of construction and I soon found myself making things up as I went along. Stage 2: Building the hull Construction starts simply enough with glueing the frames onto the keel. In order to ensure that the frames were at right angles to the keel, I found it convenient to glue a short strip of 5mm square balsa in the angle of the joints. Next, the deck was glued in place. Because the deck is not flat, it has to be held in place while the wood glue sets. Here and elsewhere I adopted the following technique: wood glue was applied to all the frames and the keel with the exception of a few vital areas where the deck needed to be held down.