Mission Providing world class products and turnkey test solutions to our customers to help them design maintain and manage their processes in research & development, manufacturing and maintenance and be the best in the world....
About Us Microtek Instruments pioneering spirit was initiated more than 35 years ago when our Chairman Mr. S.S. Bothra had a strategic tie up with Philips in India to provide the industry with the best in test. Our efforts since then have been a success story and Microtek has grown multifold over the years.
Microtek Instruments is today one of the leading distributor and representative organizations in India providing sales and service support to world leading manufacturers like Rotek Instruments Corp.–USA, EZ Digital – Korea (formerly sold under Philips/LG brand), Chauvin Arnoux – France, Thermo Fischer – USA, Dynamic Sciences – USA, DARE – Netherlands, Adaptive Power System – USA, Hsiang Cheng – Taiwan, Martel / Beta Calibrators – USA, HiloTest – Germany, Montena – Switzerland, Metrix – France, Tenmar – Taiwan , Center – Taiwan to name a few in the field of...
Test & Measurement that includes Universal Test & Measurement Equipments Electrical Testing/Power/Environmental Test Equipments EMI/EMC Chambers & Test Equipments Calibration Equipments High Voltage & RF Microwave Equipments
CUSTOMER BASE Microtek Instruments customer base includes Test Houses, Defense Establishments, Power Utilities, Manufacturers of Products/Processes with electronics, Engineering Institutes, Network Operators, Service providers, Government and Commercial organizations as well as individual end users.
SALES NETWORK Microtek Instruments operates through its own support offices located in Chennai, Bangalore and Delhi as well as through a wide network of distribution channels for countrywide reach for its Test & Measurement business.
CUSTOMER CARE Microtek Instruments gives top priority to customer care and a dedicated customer service center at Chennai & Bangalore held by our professional service team ensures prompt after sales application & service support.
www.microtekinstruments.com Products Universal Test & Measuring
High Quality Equipments at competitive prices to meet your Universal Test and Measurement requirements to help design maintain and manage products and process. Application Areas: R&D / Defense Labs, Quality Control Depts., Educational Institutes, Manufacturing Sector, Telecom Service Providers, Maintenance Depts., Field service personnel etc.
Analog Oscilloscopes Hand Held Digital Multimeter Spectrum Analyzer Frequency Counters Frequency Band from 5 to 150Mhz or No. of Digits: 3 ½ to 4 ¾ Digit Models Range 9KHz~2.7/3/27/40 GHz or more Range 0.1~1.5/3/9/18 GHz or more more Dc accuracies up to 0.025% or better Measures frequency range for all Period / Total measurement 2 / 4 Traces or Channels Measurement: ACV, DCV, ACA, DCA, Ohms communication applications including Time interval and ratio measurement High Sensitivity to 1mV/div or better Diode test, Continuity, Transistor Test cable operators, mobile needs such as High sensitivity external reference input 400V Max Input Voltage Also available models with Temperature, CDMA, GSM, PCS and PHS function Also Available Models with functions Capacitance, Harmonics, Power, Using Digital Synthesizer System Ac/Dc coupling function (selectable X1 like Component tester, Autoset, Frequency functions Tracking Generator, RS 232 /IEEE / X10 attenuator) Function Generator, Frequency Optional: RS 232 Interface & Software Interface options available Data hold function, Optional RS 232C Counter,DMM etc Also available Analog Multimeters High Sensitivity Interface. (1000/1500V) Available in CRT / LCD Display.
Digital Oscilloscopes Bench Top Digital Multimeter LCR Meters Network Tester Bandwidth from 20 to 350MHz or more 3½ to 6½ Digits or more available Measures L/C/R with D/Q/θ display Scalar Tester Sampling : Real Time up to 1 GS/s, Dc accuracies to 0.012/0.0015% or Dual Display with 2/4 Test Frequency Measures Insertion Loss or Gain Equivalent: up to 50GS/s or better better Auto/ Manual range with 19,999 counts Frequency 1MHz-2.7GHz or more Autoset, FFT Analysis Features Functions: ACV, DCV, ACA, DCA, Ohms resolution Optional RS 232/GPIB Interface 400V Max Input Voltage Diode test, Continuity, dBm 4-wire measurement Lan/Cable Tester Mono/Color LCD Display Temperature, Capacitance, Frequency Tolerance Mode Verifies Conformity of LAN with Optional: RS 232/USB/Centronics/GPIB Functions are available Optional: RS 232 Interface. international standards Interfaces Internal Data Memory for 6 ½ digit Also Available models with Test Type of Cables : twisted pair, multi- Also available Analog cum Digital & model Frequency to 1MHz. pair, RJ45, RJ11, coaxial, Differential CRT Based Oscilloscopes. Optional: RS 232 & Software, IEEE Length of measurement to 3500m or Interface. more.
Hand Held Digital Oscilloscopes Function/Arbitary Generators Dc/Programmable Power Educational Trainers Bandwidth from 5 to 100MHz or more Range 100mHz to 120MHz or more Supplies Microwave Trainers Uses the rectangular standard Autoset 2 or 4 Channels Isolated Sine/Square/Triangle/Pulse Waveforms Programmable Dc Power Supplies waveguide R100 technique Sampling to 1 GS/s Real Time or better Am/Fm/PSK/FSK/Burst/Arbitrary Range: Voltage to 150V; Current to 60A Frequency range from 8.5 to 9.6GHz Voltage to 200V/div or more Waveforms Programmable via RS 232/GPIB Equipped with the EASYFIX(tm) fast Functions include FFT, Harmonics, Data Also available basic Function Interface logging assembly system generators (2/3/5/10/15/20MHz) High Resolution: 0.01mA & 0.1mV Built in 2/4 Channel Multi meter Also Available 8085 /8086 /8051 with & without counter, Signal Dc Power Supplies Mono/Color Display with touch screen Microprocessor Trainers generators to 40GHz, AM/FM Range : Voltage to 300V; Current to Compact and lightweight ideal for Field Digital/Analog IC Trainer; L/C/R Generators, Pattern Generators, 20A use Decade Boxes. Audio Generators etc Fixed/Single/Dual/Triple/Multi Output RS 232/USB/Centronics/Ethernet Interface. Series/Parallel Tracking Modes Digital/Analog Models Also available Custom Built Power Supplies and more... www.microtekinstruments.com Products Electrical Safety / Power / Environmental Test & Measuring
High Quality Products for verification and maintenance of test parameters related to Electrical safety, Power & Energy, and Environmental quantities. Application Areas: Power Utility Organizations, Process Industries, R&D Labs, Educational Institutes (EEE Dept), Motor / Transformer / Fan / Light/ Automobile Manufacturers, Heavy Industries & Electrical Maintenance Depts. etc.
Power/Harmonic/Energy Digital Insulation Tester Micro-ohmmeters Transformer Ratio Meter Analyzer (Megohmmeter) Automatic measurements from 0.01µΩ … 5Ω Turns Ratio Range 0.8 to 13000 or Measures Voltages to 600V; Currents to Voltage from 40V – 5100V or more Currents to 10/50/200A more 6500A or more Resistance from 10Kohms to 10 Tohms or more Pure filtered Dc power source Automatic Measurements of Voltage/ Measure active, reactive and apparent Automatic Calculation of DD, DAR & PI Values Single or continuous measurements Turns Ratio, Current, and Phase power Step Voltage Mode Built in Memory & Remote Operation thru PC displacement Measures active, reactive, acquired and Graphic LCD Display Automatic Calibration function Single hook up to the transformer transferred energy Capable of operating in 230/400KV Switchyard Automatic shut off for over temp. condition Automatic test voltage range Harmonics for voltage, current, or power Environments Extremely rugged can withstand a drop test of Displays deviation from a nominal ratio up to order 50’th or more Optional : RS 232 Interface & Software 1 metre Measures Power Transformer CT’s & Built in 2/4Mb Memory, Color LCD Display Also available Low Cost Battery Operated Microprocessor based system PT’s Optional : Transient/Flicker Analysis Digital as well as Analog Power / Hand Also available Low Cost Micro/Milli Ohm Available in Single Phase/Three Also available Single Phase cranking models. Meter. Phase Configurations. Configurations Useful for Energy Management.
Earth Tester / Earth Clamps Electrical Tester Clamp Meter / Current Probe Temp. / Humidity Meter Earth/ Soil Resistivity /Coupling Tester Over 14 different measurements Clamp Meter to 2000A (Ac/Dc) or more Infrared Non Contact Type Resistance to 2/20/100KOhms Voltage/Frequency/Insulation/ True RMS (Ac+Dc) Temp Range: -50 to 1000°C or more 3 or 4 Terminals Differential test Voltage/Resistance/Frequency Fixed/Adjustable Emmissivity Validation thru Automatic Check Earth/Selective Earth Test Power Factor/Phase Rotation Contact Type Temp./Humidity Meters Large LCD Display, Heavy Duty Case Loop/L-PE Loop Test Bar Graph Indication Temp Range: -20 to 1370° or more Optional : Rechargeable Battery, RS 232 & Continuity/Phase Rotation Test Current Probes 0.1ma to 10,000A or Humidity Range: 0 – 100%RH Software Current/Leakage Measurement more Channel 2/3/4 Channels Also Available Low Cost Digital/Analog Built in Memory, RS 232 Interface Jaw size from 3.9mm to 1.2m or more Datalogging features Models Performs IEE 16th Tests in a single Useful for Leak current, process Optional: RS-232 Interface & Software. Earth Clamps 0.1 to 1200 Ohms or more instrument current, secondary winding of Swift testing of Earth Loops without transformer, Ac current, Ac/Dc Current breaking circuit measurements. Leakage current: 1mA – 30A or more Can be used with DMM or Scopes Max Jaw Size : 32mm or more. Optional : Datalogger / Software.
Sound Level Meter Lux Meter Tachometer Anemometer Measurement Range : 30 – 130dB or Range 0 to 200,000 Lux or more Range to 99,999 RPM or more Range to 30 / 45 m/s or more more Digital Display Period / Total measurement Resolution 0.01 m/s Frequency Weighting: A & C CIE Spectral Correction Time interval and ratio measurement Temperature measurement facility Time Weighting: Fast & Slow Fc/Ix Function Selectable High sensitivity external reference input Dual Display Bar Graph Indication Also available low cost models. function Unit: m/s, km/h or knots. Optional : Datalogging, RS 232 & Ac/Dc coupling function Software. Optional RS-232C Interface Also available low cost contact/non- contact models. www.microtekinstruments.com Products EMC Chambers & Accessories EMI/EMC
Turnkey Solutions & Services to supply Anechoic Chambers and its accessories conforming to various International EMI/EMC Standards for both Commercial & Military Testings. Application Areas: Commercial EMI/EMC Test Houses, Defense EMI/EMC Labs, Manufacturers of Automobile & Its sub systems, In House EMI/EMC Test Labs, Manufacturers exporting products to Europe/USA, Manufacturers of Antenna/Radar/Military products, Institutes of higher learning etc.
EMI/EMC Anechoic Chamber Reverberation Chambers EMI/EMC Software Pyramidal Foam Absorbers Chambers for EMI-EMC both Civilian, Reverb / Mode Stirred Chambers achieves One software package to meet both emission Unique Plastic Paint to retain extreme Automotive and Military tests. High Fields with lower RF power and immunity standards (Civilian/Military) softness & Shape memory Modular Shielding Panels for easy amplifiers Compatible with all brands of test Open Cell Structure for better Impegration, fixing, dismantling, shifting of the chamber Generates uniform volume, averaged over equipments Homogeneity Zero Hole Shielding Technology gives a complete mode stirred operation Fullly Traceable Results Frequency Range to 40GHz or more for EMC/ excellent Shielding Effectiveness Meets IEC 61000-4-21, DO 160, SAE J & Automatic Report Generation Microwave testing Guaranteed for 10 years CISPR standards EUT Monitoring made easier Reflectivity Performance (dB)–52 dB or better Easy system for Absorber Installation Uses Aluminum material for higher Single tool to automate all your EMI/EMC Overall Height 1.1” to 43.7” or more Meets Standards as per IEC 61000-4-3, EN conductivity testing needs. 20 years guaranteed performance 55022(3), EN 50147-2, CISPR 16 & 25, ANSI C Software available for automated testing Fire Retardant Properties to Intl. Standards 63.4, MIL STD 285, DO 160 etc Also Available Chambers for Antenna, Also available Resonant(26GHz/- 20dB), Chambers available in 3m, 5m, 10m as Radar Cross Section, Compact Ranges Multi layer(100GHz/-55dB), well as custom built to any size to fit your Measurements etc. Truncated (40GHz/-40dB), Circumvol. space (200GHz/-52dB), Wedge(200GHz/-42dB), High Level of Flexibility in Design & Weather Proof(40GHz/-35dB), High Installation. Power (18GHz/-50dB) Absorbers & more…
Antenna Tower/Mast Ferrite / Hybrid Absorbers Shielded Doors Controller Antenna Scanning from 1 to 4 m Full Scan for Low Frequency Absorbers: 30Mhz – 1Ghz Fully Automatic / Manual Doors 4 / 8 or more Channels EMI Compliance Testing 6.7mm Thickness Three Knife edge design for better Can control Antenna Mast, Turntable, 1 to 2.5m Pre Scan for Pre Compliance Testing Flexible Installation System shielding system Remote Controlled Cart on Tracks, For Indoor & Outdoor (OATS) use Hybrid is combination of Ferrite with Knife Profile for Progressive Mode Stirrers etc GPIB Remote Control & Fiber Optic Cables Matched Pyramidal absorbers to 18GHz compression Real Time Control through Fibre Optics Manual / Automatic Control Saves space & typical performance (-10/ Standard Dimensions in mm: Measurement Software Interface with Pneumatic Polarization -20dB) 900/1200/1500 (W) x2100/2400 (H) GPIB Also available Cell Phone Antenna Any dimension available on request Easy to install & user freindly. Positioners. High Shielding Effectiveness.
Turntables Connector Panels/Honey Comb Field Probe Shielded Cabinets Pay Load: 50Kg to 4Tons or more Vents Frquency 10Khz – 4 or 40GHz or more Modular Shielding, 120dB @ 1GHz Diameter: 50 cm to 4 Metres or more Smallest 3 Axis E-Field Probe Available Standard Connector Panels 300x300mm / Useful for testing small products & Automatic Control thru Controller 0.2V/m to 600V/m or more components 200x1200mm or customs made Also Available Stand Alone Portable Laser Power Supply (no battery required) Isolates the object under test from Panels can be fitted with coaxial, feed Models IEEE/USB Interface external disturbances through waveguides, tubular filters Automotive/Mode Stirrer Bundles Anechoic Material either foam or ferrite Honey comb air vents welded to available. enables accurate measurements at low panels for better conductivity and levels shielded effectiveness performance Widely used in R&D/EMC Centres, Standard Dimensions for honey combs: Education, Automotive sub system 300 x 300 / 600mm, 600x600mm. Manufacturers, Defense Establishments to protect sensitive data. www.microtekinstruments.com Products Test Equipments EMI/EMC
Test Systems & Solutions from World Class Manufacturers conforming to various International EMI/EMC Standards like IEC/EN/ MIL-STD for both Commercial & Military tests. Application Areas: Commercial EMI/EMC Test Houses, Defense EMI/EMC Labs, Manufacturers of Automobile & Its sub systems, In House EMI/EMC Test Labs, Manufacturers exporting products to Europe/ USA, Manufacturers of Antenna/Radar/Military products, Institutes of higher learning etc.
RF Power Amplifiers EMI / EMC Receiver Immunity Tester EMC Car Tester Frequency Range : 10KHz – 40GHz Frequency: 20Hz – 2/26.5/40GHz or EMC Tester to meet CE Requirements EMC Tester for Electrical Installation of Power 10W to 20KW or more better Test upto 6 tests in one single unit Vehicles Class A & AB Detection Modes: Peak,Quasi Peak, EFT/SURGE/RING/PQF/HPOWER/HPULSE Meets ISO 7637-2 Standards Operates at 100% direct power Avg,RMS Meets IEC 61000-4-2/4/5/8/9/11&12 Modular Generator Can withstand any VSWR conditions Spectrum Analyzer Mode Low Cost and Portable Can be used with different power IEEE 488/RS 232 Interface No Preamplifiers Required for operation Built in Single Phase CDN supplies – battery or electronic Useful in EMI/EMC Testing Ac & Dc Powered for Portability Option: Three Phase CDN for Surge/EFT/PQF Additional test pulses with additional Also available Amplifier Modules. Complies fully to CISPR 16-1, FCC, Also available Single/Three Phase generators ANSI, DO-160, EN, MIL-STD EMC Harmonics/Flicker Test Systems to meet Also available Load Dump Generator. Standards. IEC & EN 61000-3-2/3.
Antenna For EMC/TEMPEST MIL-STD 461 Measurement ESD Testers NEMP/SURGE Protection Filters Test Systems ESD Tester to meet CE Requirements Power Line Filter 40 – 800A or more Range : 20Hz – 40GHz or more NEMP generators & Transmission Lines Meets IEC 61000-4-2 Standard Available in Single/Three Phase Type of Antennas for Immunity tests Voltages to 15/30KV max Configurations Biconical (20-1000MHz) Systems as per MIL-STD 461 D/E to Air and Contact Discharge Capability Principal of operation: Disperses the over Dipole (1KHz–1000MHz) meet Remote / Manual Control voltage during lightning stroke or NEMP Horns (200MHz– 40GHz) RS 103/105 Optional : Capacitor/Resistor Modules event. H-Field Broadband (100Hz-100MHz) CS 114/115/116 Portable/Light Weight Useful in protection of military/civil Log Periodics (20MHz-18GHz) RE 101/102, Low Cost. power supply system, unmanned Loops (20Hz-30MHz) CE 101/102/103/106 & more system, Stationary & mobile system with Monopoles (100Hz-100MHz) Turnkey Solutions poor grounding, power supplies switched Conical/Spiral (100MHz-1GHz) Fully Automated Systems on primary side. Antenna Test Kits (20Hz-18GHz). On Site Installation/Commissioning/ Training.
Tempest Measurement System G/TEM Cells / Strip Lines ESD/Latch Up Semicon Tester LISN Frequency Range: 1KHz – 1GHz or more GTEM Cells 3.75 metre or more as per Test devices to 128/256/384/512/768 pins or Current Capacity up to 1000A Low Frequency detection thru’ UHF IEC standards more Voltages to 1000V Highly Sensistive : 10dB over Johnson Noise TEM Cell designed for immunity tests Human body model as per ESDA STM 5.1, Safety Circuit Included Can be Enhanced with Panoramic display, on automotive devices acc. to ISO JEDEC EIA/JESD 22-A114, MIL-STD 883 E & Optional: Protection Devices & Coaxial frequency extension to 100Hz and 11452-3 & SAE J1113-24 AEQ 100-002 50V to 8KV relay for remote operation. 18Ghz, and calibration with Impulse and Triplate (Dc-1GHz) as per SAE J1113-25 Machine Model (MM) per ESDA STM5.2, comb generators. Stripline (Dc-1GHz) for Immunity tests on JEDEC EIA/JESD22-A115, and AEC Q100- Useful in EMI/EMC Testing, Road Vehicles as per ISO 11452-5. 003, 50V to 2KV Spectrum Surveillance, RF Latch-Up testing per JEDEC EIA/JESD 78 and Instrumentation, Remote Monitoring. AEC Q100-004 including preconditioning, state read-back and full control of each test pin. Test reports include pre-stress, pre-fail (ESD) and post-fail data, as well as full curve trace and specific data point measurements Data can be exported for statistical evaluation. www.microtekinstruments.com Products
Calibration Equipments High Accuracy Calibration Products provide the necessary tools to calibrate/adjust various Energy / Power Meter and other Test & Measurement equipments as well as process parameters to ensure the measurements are within specified limits to maintain quality standards of the end product / process. Application Areas: Calibration Test Labs, In House R&D/QC Labs, Energy/Power/ Harmonics Meter Manufacturers, Process Industries, Production Depts., Control & Instrumentation Depts., Electrical Maintenance Depts. as well as to meet the requirements of ISO 9000 etc.
Power / Energy Calibrator Power/Energy Reference Standard Energy Meter Test Bench Reference Meter Best Power Accuracy of 100ppm or better Power Accuracy to 50 PPM or better Test Bench to test/ Calibrate Single or Three Power/Energy Accuracy Voltages to 1056V; Currents to 220A or Energy Accuracy to 100 PPM or better Phase Energy Meters 0.1%/0.05%/0.02% or better more Voltage to 640V, Current to 200A or more Accuracy 0.5%/0.1%/0.05% /0.02% or better Voltage to 640V, Current to 120A or Phase Angle from -180° to + 180° Frequency to 400Hz Voltage to 420V, Currents to 120A, more Frequency from 16 to 1000Hz Useful in calibrating Power/Energy Harmonics to 21’st or more % Error Detection Mode Single and Poly Phase Configurations Calibrators, Reference meters etc Available Configurations 3,5,6,16,20,40 Single/Three Phase Configuration Up to 6 Channel of Energymeter Pulse Available in Single Phase or Three Phase Meters Measures Voltages, Current, Active Inputs or more Configurations Fully Automated Testing through Software as Power, Reactive Power, Apparent Power, Useful in Calibrating Power/Energy Portable for On-Site Calibration. per IEC/IS Standards Frequency, Phase Angle and Power Meters, Ac Voltage/ Current Sources, Built in 0.05%/0.02% Reference Meter. Factor Phase Angle Meters, Power Quality / Portable for On-Site Testing Harmonics Meters etc Portable for On-Site Calibration.
Electrical Equipment Calibrator Multifunction Ac/Dc Calibrator Multifunction Multifunction Pressure One Tester to Calibrate all Electrical Accuracy of 50/25/5 PPM or better Documenting Calibrator Calibrator Parameters Ac/Dc Voltage:1000V; Ac/Dc Current: Accuracy of 0.025% or better Accuracy 0.025% or better Tests Insulation Testers to 5KV/2GOhms 20A or more Source/Simulate as well as Measures/ Single or Dual Isolated Pressure Tests PAT Testers 2 & 4 wire resistance to 1Gohms; Reads the following: Thermocouple, RTD, Sensors Tests LOOP Testers Capacitance to 100uF Ohms, Dc Voltage/Current and Frequency External Pressure Module Connection Tests RCD Testers Inductance: 10H; Frequency: 10MHz; Loop Power/Switch Testing Functions 5Psi-10000Psi or more Portable for On-Site Testing PT100 Simulation Models available Built in Hart Temperature compensation ensures Useful in calibrating Analog/Digital Communicator, Data logging Capability Accuracy Multimeters, Oscilloscopes, Portable for On-Site Calibration & Test. Pt100 RTD input for Temp. Thermometers, Optical Tachometers, Measurements Counters, Recorders, Ohm Meters, Measures 4-20mA input, 30V Dc Power Meters, LCR Meters, Power Internal 24V Loop Power supply Supplies etc. Portable for On-Site Calibration & Portable for On-Site Calibration. Test.
Loop Calibrator Temperature Calibrator Process Calibrator Pneumatic Calibrator High Accuracy ±0.015% or more High Accuracy ±0.4°C J T/C and Cum Multimeter 0.035% Accuracy, 0.001 PSI Resolution High Resolution 0.001mA/0.001V ±0.3°C 4W PT 385 RTD Accuracy of 0.03% or better Dual Digital Display – psi & mA or Voltage % Error Function eliminates error 10 T/C Types and 8 RTD Type Testing Simultaneously Source/Simulate as well calculation RTD Simulation works with all pulsed as Measures Ohms, Dc Voltage/Current Built in Loop Power Supply Simulates power and measures 2-wire transmitters and Frequency Pressure Switch Test transmitter Direct Keyboard entry or scroll control of Ouput Current (±25mA) and Voltage Useful in Calibrating Pneumatic Portable for On-Site testing output (±15V) Field Instruments like valve actuators, Enables remote calibration of 4-20mA RS-232 Interface Square Wave source with adjustable P/I transmitters, Controllers, Gauges, devices. Portable for On-Site Calibration & Test. amplitude, duty cycle, and pulse width Switches, and Recorders Programmable 16 continuous or timed step outputs Dual Display 50000 Counts, Rechargeable Battery Portable for On-Site Test. www.microtekinstruments.com Products
High Voltage & RF Microwave Products
High Voltage Products to meet your High Voltage / Impulse testing requirements and RF Microwave test equipments for microwave testing as well as wireless telecommunication applications. Application Areas: High Voltage/Microwave Labs in Industry & Education Fields, R&D Labs, Switchgear/Transformer/Telecom Manufturers, Broadcast/Network Service providers etc.
HV Impulse Generators Ac/Dc High Voltage Testers High Voltage Dividers Current Viewing Resistors Waveform: 1.2/50μsec HV Test to 100KV Ac, 20KV Dc or Measures Ac/Dc High Voltage to 200KV Current Ratings Peak: 3 to 100KA, RMS 8 to Peak Value of Impulse Voltage : more or more 1600A 6/10/12/24KV or more Currents to 100mA or more Used in conjunction with HV measuring Rise time : 7 ns to 175ns, Bandwidth: Max Stored Energy: 5/12/18 Measurement of Protective Earth equipments 50MHz to 200MHz Joules/36Wsec or more Resistance HV Impedance to 400Mohms Enables precise measurement of peak value Designed for testing Dielectric Strength of Measurement of Insulation Resistance Accuracy Class to 0.5 and waveform of fast risetime current pulses Components, insulations, air and surface Measurement of Leakage/Supply Current Not Susceptible to Noise and Electromagnetic flash over gaps, withstand capability of As per IEC/VDE Standards. Interference insulation between accessible parts and Also available Broad Band Voltage hazardous live parts Dividers with capacitive compensation, Meets EN 60065, IEC 60 and VDE Capacitive Pulse Voltage Dividers. Standards.
AC Power Converters High Voltage Breakdown High Voltage Power Supplies High Voltage Probes Output Power: 3kVA to 90kVA or more Tester Output Voltages to 100V or more HV probes for DMM up to 28/40KV Ac/Dc Output Frequency: 45-500Hz or more Output Voltage: 5/10/50KV or more Output Currents to 30A or more or more Output Voltages : 150 - 520V/3 Phase (Ac/Dc) Low Ripple & Noise 1000:1 Ratio Useful for duplicating a utility grid of Rupturing Current to 100mA Very Fast Response Time. HV probes for Oscilloscope to 15KV or either 50/60Hz for commercial testing Time Settings: 1-99s more and 400Hz for aircraft or military Capacity of Transformer: 1000VA or Bandwidth Dc to 50MHz or more testing. more Also available Differential Probes Acoustic Optic Alarm for with frequency bandwidths to Disqualification decision. 25/50/100Mhz and Voltages up to 6.5KV to convert any analog / digital scope into a differential scope.
Microwave Power Meters RF Field Strength Meters Selective RF Receivers Directional WattMeters Frequency 100KHz to 50GHz or more Range up to 2900 MHz or more Frequency to 25 - 2500Mhz or more Testing power supplied by the transmitter Measures power in dBm or mW, on a Measures and demodulates W-FM/ Measurement Dynamics: to –130 dBm and reflected by the antenna and cable dynamic of 50 dB (100 pW to 25 W) or N-FM/ AM/ SSB signals Electrical field Mapping (GPS, odometer Directional Wattmeter for HF,VHF,UHF more PLL tuning system for precise and specialized software) Transmission Power deviation in dB or % frequency tuning Available with Am/Fm Demodulation Frequency Range: 25 – 500Mhz, Power : Bands are LF, HF, UHF and SHF Useful for Cable TV, Cellular Phone, Ideal on-site tool for Cellular telephony, to 500W or more Uses thermocouple and diode probes Cordless Phone, Satellite TV broadcasting, Television, EMC etc. Useful for Military & Civilian IEEE 488 Interface Standard. Receiver, Hidden Camera Detection, applications. Tele tapping Detection. www.microtekinstruments.com
Our Chairman Mr. S. S. Bothra receiving the memento of appreciation, for completing the 10 metre chamber successfully at Sameer-Chennai, from Mr. Kalaignar M. Karunanidhi, in the presence of Mr. Dayanidhi Maran, Ex - Hon. Union Minister of Comm. & I.T., Govt. of India. Partial List of Esteemed Customers
SAMEER (CENTER FOR ELECTRO MAGNETICS) – CHENNAI/MUMBAI/ HINDUSTAN AERONAUTICS LTD – BANGALORE/HYDERABAD/ KOLKATTA LUCKNOW ELECTRONIC REGIONAL TEST LABS – DELHI/MUMBAI/KOLKATTA BHILAI STEEL PLANT – BHILAI ELECTRONIC TEST & DEVELOPMENT CENTER – CHENNAI/BANGALORE/ VIZAG STEEL PLANT – VIZAG PUNE/ GUWAHATI /JAIPUR/HYDERABAD SALEM STEEL PLANT - SALEM NATIONAL PHYSICAL LAB – DELHI NATIONAL ALUMINIUM COMPANY – BHUBANESHWAR NATIONAL TEST HOUSE – KOLKATA BHARAT ALUMINIUM COMPANY – KORBA IDEMI - MUMBAI ITC – BHADRACHALAM BUREAU OF INDIAN STATNDARDS – SAHIBABAD/CHENNAI/MUMBAI T.T.L (HAVELLS)-SAHIBABAD CENTRAL ELECTRICAL TESTING LAB – KAKALLUR TECHNOLOGY RESEARCH – NOIDA CHIEF ELECTRICAL INSPECTORATE – CHENNAI TVS MOTOR COMPANY– HOSUR INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH - KALPAKKAM REVA ELECTRIC CAR COMPANY - BANGALORE NATIONAL INSTITUTE OF OCEAN TECHNOLOGY - CHENNAI VIJAY TV - CHENNAI SOUTHERN RAILWAY – CHENNAI/AARKONAM/ MYSORE/BANGALORE CADENCE WORTH – CHENNAI WESTERN RAILWAY - MUMBAI ABAN LLOYD – CHENNAI N.T.P.C LTD – KORBA/DADRI/TANDA/TALCHER/SONEBHADRA/RIHAND/ CAIRN ENERGY - CHENNAI VINDHYANAGAR WIPRO TECHNOLOGIES – BANGALORE GAS AUTHORITY OF INDIA LTD – AURAIYA/BHARUCH/HAZIRA LARSEN & TOUBRO – MUMBAI/CHENNAI BHARAT HEAVY ELECTRICAL LTD – CHENNAI/BANGALORE/BHOPAL/ SIEMENS – CHENNAI/NASHIK NAGPUR /NOIDA/TRICHY A.B.B. – BARODA CENTRAL POWER RESEARCH INSTITUTE – BANGALORE/BHOPAL TATA HONEYWELL – PUNE POWER GRID CORP. ON INDIA LTD – ASSAM/BHADRAVATI ALSTOM – CHENNAI/DELHI TAMIL NADU ELECTRICITY BOARD – CHENNAI & OTHER DIVISIONS HCL TECHNOLOGIES – CHENNAI TUTICORIN THERMAL POWER STATION – TUTICORIN CO INDIA – COIMBATORE METTUR THERMAL POWER STATION - METTUR SITARC – COIMBATORE NEYVELI LIGNITE CORPORATION – NEYVELI CONZERVE - BANGALORE CHATISGARH STATE ELECTRICITY BOARD – RAIPUR/KORBA INDIAN INSTITUTE OF TECHNOLOGY – CHENNAI/ MUMBAI / MADHYA PRADESH ELECTRICITY BOARD – BHOPAL KANPUR MAHARASHTRA ELECTRICITY BOARD – MUMBAI ANNA UNIVERSITY – CHENNAI BHILAI ELECTRIC SUPPLY CO. – BHILAI MADRAS INSTITUTE OF TECHNOLOGY - CHENNAI MEGHALAYA ELECTRICITY BOARD – SHILLONG MEENAKSHI AMMAL GROUP OF ENGG. COLLEGES- NUCLEAR POWER CORPORATION – MUMBAI/CHENNAI/KUDKANKULAM KANCHEEPURAM RAJASTHAN ATOMIC POWER STATION-KOTA SRM GROUP OF ENGG. COLLEGE- CHENNAI RESEARCH CENTER IMARAT – HYDERABAD PGP GROUP OF ENGINEERING COLLEGE- CHENNAI HEAVY VEHICLES FACTORY – CHENNAI ASAN MEMORIAL COLLEGE OF ENGG - CHENNAI COMBAT VEHICLE RESEARCH DEVELOPMENT ESTB. – CHENNAI NATIONAL INSTITUTE OF TECH – TRICHY N.P.O.L - KOCHI GOVT. ENGG. COLLEGE – TIRUNELVELI/ COIMBATORE ARMY BASE WORKSHOP – MEERUT CENTRAL POLYTECHNIC - CHENNAI AVIONICS RESEARCH CENTER - BHUBHANESHWAR CRESCENT ENGG. COLLEGE-CHENNAI VEHICLE RESEARCH DEVELOPMENT ESTABLISHMENT – AHMEDNAGAR SONA ENGG. COLLEGE – SALEM C.A.T - INDORE SAVEETHA ENGG. COLLEGE – CHENNAI I.S.R.O – AHMEDABAD/BANGALORE/TRIVANDRUM SSN COLLEGE OF ENGG. – CHENNAI L.P.S.C - MAHENDRAGIRI VELLORE INSTITUTE OF TECHNOLOGY – VELLORE TERMINAL BALISTIC RESEARCH LABORATORY – CHANDIGARH RMK GROUP OF INSTITUTIONS – GUMIDIPOONDI DEFENSE RESEARCH DEVELOPMENT LAB – HYDERABAD PALLAVAN GROUP OF INSTITUTIONS - KANCHEEPURAM AERONAUTICAL DEVELOPMENT AGENCY – BANGALORE JPR GROUP OF ENGG. COLLEGES - CHENNAI BHARAT ELECTRONICS – BANGALORE/CHENNAI/GHAZIABAD/PUNE/ BITS – PILANI HYDERABAD S.V.UNIVERSITY – TIRUPATI OIL NATURAL GAS COMMISSION – CHENNAI /ASSAM/BARODA/KARAIKAL C.R.REDDY COLLEGE – HYDERABAD DEPT. OF LIGHT HOUSE & LIGHT SHIPS – JAMNAGAR KUVEMPU UNIVERSITY-KARNATAKA AIRPORTS AUTHORITY OF INDIA – CHENNAI THAPAR INSTITUTE - PATIALA ALL INDIA RADIO & TV – CHENNAI/BANGALORE/DELHI NIRMA INSTITUTE OF TECHNOLOGY - AHMEDABAD BHILAI INSTITUTE OF TECHNOLOGY – BHILAI
MICROTEK INSTRUMENTS
Corporate Office Address Contact Information
Microtek Instruments Phone: +91-44-45960024 18, Old 10 Lakshmanan Street Fax: +91-44-45960025 T Nagar, Email: [email protected] Chennai - 600 017. [email protected] India. Website: http://www.microtekinstruments.com