Trisaia Research Centre
Total Page:16
File Type:pdf, Size:1020Kb
TRISAIA RESEARCH CENTRE THE CENTRE Address ENEA - Trisaia Research Centre S.S. Ionica, km 419.5 75026 Rotondella (Matera) Tel. +39-0835-974111, fax +39-0835-974292 Director Dr. Donato Viggiano e-mail: [email protected] The Trisaia Research Centre, set up in 1962 as a facility for the treatment of spent fuel elements, is currently a multidisciplinary centre equipped to perform research and development activities in a wide range of sectors: agro-biotechnology; laser applications; technology innovation for industry; renewable energy sources (biomass and solar energy); metrology; environmental monitoring; radioprotection; rare earths; waste treatment. The Centre counts 260 employees. In December 2004 the Centre obtained the double certification for the Integrated Environment Management System (according to the ISO 14001:96 regulation) and Safety (according to the OHSAS 18001:99 Standard). Aerial view of the Trisaia Research Centre HISTORY The Centre was set up in 1962 in the Trisaia Inferiore, within the Rotondella Municipality, at about 4 km from the Jonian Sea, close to the Sinni river and the Pantano di Policoro woods. Initially, the activities performed regarded the nuclear fuel cycle and the management of several prototype plants for the development and qualification of nuclear processes and components. In the second half of the eighties, the Centre started to convert its activities, in the framework of a general strengthening of the facilities for the scientific and technological research in southern Italy, expanding its competencies also through the acquisition of young personnel. Presently, the Centre performs activities regarding all the programmatic objectives of ENEA. The Centre has a significant archaeological value, being situated in an area where in the past, the Greek colony of Siris rose, notably the port area of the ancient city at the outlet of the Sinni river. The acropolis, the sacred area and the necropolis of Siris have been detected instead along the Castello di Policoro hill, where in 433-32 BC Heracleia was built after the decadence and destruction of Siris. The different aspects of the life of the Greek colonies are documented by the finds of exquisite manufacture stored in the National Museum of Sirtide in Policoro and the National Archaeological Museum of Metaponto. The plateau on which the Centre is situated was in ancient times occupied by a great quantity of siroi, underground hollows, commonly defined as “potholes for pagans”, where cereals were stored. In later times the siroi were sunk underground, probably because they constituted a danger to men and animals. At the beginning of the sixties, in the area were discovered seven/eight siroi, of which at least one, preserved well enough to be studied. Restored upper part of some “siroi” in the “Pothole of the Pagans”, located outside the Centre. The “siroi” were used as storage sites for cereals ACTIVITIES The activities, conducted with leading edge equipment and facilities, concern: - agro-biotechnology - laser applications - technology innovation for industry - renewable energy sources (biomass and solar energy) - metrology - environmental monitoring - radioprotection - rare earths - waste treatment. AGRO-BIOTECHNOLOGIES The agro-biotechnology activities touch upon a wide range of areas: • quality improvement and diversification in agricultural produce; • experimentation, demonstration and transfer of technologies and methodologies for typical products of southern Italy. An Integrated Innovation Centre for Agro- biotechnologies has been established, aimed at developing innovation technologies and systems, as well as providing advanced services to small and medium sized enterprises of the field; • information services to firms, concerning certification and evaluation of product quality; • preparation, certification and furnish with reference materials. Genomics Laboratory: Microarray Printing System LASER APPLICATIONS The Centre possesses an experimental station for research and development of laser technology applications in the treatment of materials, used for: • qualification of the laser welding process through microstructural, mechanical and behavioural characterization; • consultancy services to enterprises for the introduction of innovation processes based on laser technology. The activities, also conducted trough the CALEF Consortium, concern: • innovative solutions for the creation of steel railway panels; • applications of optical beams to light-weight aluminium alloys for naval and aerospatial applications; • welding of steel structural elements and structural components employed in the aeronautics sector; • cutting of parabolic shapes for solar concentrators; • training activities, with the collaboration of other research bodies and institutions. Laser application laboratory: detail of parabolic steel shape cutting TECHNOLOGY INNOVATION FOR INDUSTRY The Centre features facilities for the transfer of innovative technologies from research to production and to enterprises, with particular reference to the southern Italy area: • a Centre for automation technologies of the manufacturing process, that carries out R&D activities to design and fabricate prototypes for the automation of the fruit and vegetable and milk and dairy product sectors, as well as consultancy, support and technology transfer to agroindustrial firms; • a Services Centre providing assistance to SMEs for the retrieval and recycling of industrial waste, designed to promoting the use of novel technologies and services in the mechanics, textile, ceramics and tannery sectors; • a Centre of innovation in goods transportation, in technology R&D and training, in the field of transportation intermodality (railway-road-water) and diagnostic, in support to the maintenance of transportation components and systems. Centre for automation technologies of the manufacture processes: fruit and vegetables calibration and automatic filling of containers RENEWABLE ENERGY SOURCES: BIOMASS AND SOLAR ENERGY Research in the biomass sector is currently focused on two transformation processes, steam explosion and gasification, aiming at • defining and certifying chemical and physical characteristics of biomass in relation to its application in the energy field; • developing and qualifying technologies for the exploitation of biomass residues from agricultural production and pruning, forests and wood waste (wood industry); • implementing eco-compatible technologies for power generation from hydrogen processed in fuel cells. The Centre possesses a laboratory for testing and qualifying solar components and systems, whose activities concern mainly: • certifying thermal efficiency of solar components; • studying solar thermal desalination systems; • studying concentrating solar plants for hydrogen production and power generation; • setting a quality mark recognized at European level (Solar Keymark). 500 kWt fluidized bed steam gasification plant METROLOGY The Integrated Centre for Metrology is a complex of laboratories equipped with cutting- edge machinery, all SIT certified or about to be certified. The Centre constitutes a major reference point for the manufacturing industries of southern Italy in the field of non- destructive testing. The Centre conducts research on applied metrology and qualification of materials and components. The main research areas concern: • certification services of materials and components (SIT and ISO 9000 certificates); • training of qualified personnel in the sector of quality control, measurements and tests, R&D of new products and technologies. Non-destructive analysis on building materials: elaboration of thermographic images performed on Palazzo Agresta D’Alessandro (Rotondella – MT) ENVIRONMENTAL MONITORING The activities concern the following subject matters: • environmental monitoring/forecasting services; • analysis of the level of air, soil and water pollution in agricultural, urban and industrial areas; • analysis for environmental reclamation; • environmental monitoring in areas destined to waste disposal (monitored rubbish dumps); • characterization of the environmental impact of agricultural and industrial activities; • environmental quality control in support to the Protected Designation of Origin agricultural product; • training of qualified personnel in the environmental sector. The Centre also works as a reference point for the national networks monitoring acid rain and radioactivity in the Mediterranean Sea. Chemical biological laboratory: HPLC chromatographer RADIOPROTECTION The Institute for Radioprotection (IRP) is present in five ENEA Centres (Bologna, Casaccia, Frascati, Saluggia and Trisaia) and conducts activities regarding: • physical and environmental radioprotection surveillance, that ENEA, as manager of facilities and laboratories capable of emitting ionizing radiations, is obliged to carry out as prescribed by law; • research, development and qualification in dosimetry and qualification of radioprotection techniques. The IRP also provides on demand by national, local and private institutes, radioprotection evaluations on activities carried out by structures and laboratories capable of emitting ionizing radiations. The IRP of the Trisaia Centre performs radiotoxicology surveillance activities and Whole Body Counter measurements for employees, presenting a high level of contamination risk. Counter, with mobile bed and NaI(TI) detector RARE EARTHS Within the activities on new materials, a pilot plant has been set up for the