DOCSLIB.ORG

The Current State of Silicone-Based Dielectric Elastomer Transducers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Current State of Silicone-Based Dielectric Elastomer Transducers Downloaded from orbit.dtu.dk on: Oct 07, 2021 The Current State of Silicone-Based Dielectric Elastomer Transducers Madsen, Frederikke Bahrt; Daugaard, Anders Egede; Hvilsted, Søren; Skov, Anne Ladegaard Published in: Macromolecular Rapid Communications Link to article, DOI: 10.1002/marc.201500576 Publication date: 2016 Document Version Peer reviewed version Link back to DTU Orbit Citation (APA): Madsen, F. B., Daugaard, A. E., Hvilsted, S., & Skov, A. L. (2016). The Current State of Silicone-Based Dielectric Elastomer Transducers. Macromolecular Rapid Communications, 37(5), 378-413. https://doi.org/10.1002/marc.201500576 General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Users may download and print one copy of any publication from the public portal for the purpose of private study or research. You may not further distribute the material or use it for any profit-making activity or commercial gain You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Complete Manuscript DOI: 10.1002/marc.((insert number)) ((or ppap., mabi., macp., mame., mren., mats.)) 1 2 Review 3 4 5 The current state of silicone-based dielectric elastomer transducers 6 7 Frederikke B. Madsen, Anders E. Daugaard, Søren Hvilsted and Anne L. Skov* 8 9 10 11 ––––––––– 12 13 Dr. F. B. Madsen, Prof. A. E. Daugaard, Prof. S. Hvilsted, Prof. A. L. Skov 14 15 Technical University of Denmark, DTU, Department of Chemical and Biochemical 16 Engineering, Søltofts Plads, building 227, 2800 Kgs. Lyngby, Denmark 17 E-mail: [email protected] 18 19 ––––––––– 20 21 22 23 Silicone elastomers are promising materials for dielectric elastomer transducers (DETs) due to 24 25 26 superior properties such as high efficiency, reliability and fast response times. DETs consist of 27 28 thin elastomer films sandwiched between compliant electrodes, and they constitute an 29 30 interesting class of transducer due to their inherent lightweight and potentially large strains. For 31 32 33 the field to progress towards industrial implementation, a leap in material development is 34 35 required, specifically targeting longer lifetime and higher energy densities to provide more 36 37 38 efficient transduction at lower driving voltages. In this review the current state of silicone 39 40 elastomers for DETs is summarised and critically discussed, including commercial elastomers, 41 42 43 composites, polymer blends, grafted elastomers and complex network structures. For future 44 45 developments in the field it is essential that all aspects of the elastomer are taken into account, 46 47 48 namely dielectric losses, lifetime and the very often ignored polymer network integrity and 49 50 stability. 51 52 53 54 55 56 57 58 59 60 61 62 63 - 1 - 64 65 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 - 2 - 64 65 1. Introduction 1 2 3 The search for materials that exhibit properties similar – or even superior – to the human muscle 4 5 6 has been the focus of engineers and researchers for several decades. The challenge lies in the 7 8 many excellent properties of human muscles, such as high energy densities and large, 9 10 obtainable strains. Furthermore, human muscles generate linear motion, whereas currently used 11 12 13 electric motors generate rotational motion.[1–3] Another feature of human muscles is that they 14 15 have self-repairing properties, which is also highly desired for soft transducers. 16 17 18 Polymers offer interesting prospects as smart materials for artificial muscles, as they are 19 20 lightweight, noiseless and low in cost. Electroactive polymers (EAPs) consist of soft polymeric 21 22 23 materials with relatively large energy densities, relatively fast response times and the ability to 24 25 undergo large deformations when stimulated by electrical fields.[4,5] EAPs can be divided into 26 27 28 two main groups: ionic and electronic. Ionic EAPs respond to an electrical field through the 29 30 diffusion of ions in a material. In addition, they generally require low driving voltages (as low 31 32 as 1-2 V) but require an electrolyte, which means that encapsulating the aqueous environment 33 34 35 is necessary. Furthermore, there is a need to maintain wetness, and it is difficult to maintain 36 37 DC-induced displacements.[6–9] However, recent developments[10] have proven it possible to 38 39 40 create semi-interpenetrating networks from polyionic liquids, which eliminates the need for an 41 42 aqueous environment and thereby opens up the possibility of a wide range of applications where 43 44 45 large forces are not needed. The advantages of electronic EAPs over their ionic counterparts 46 47 include higher energy density, that they can be operated in air without major constraints, large 48 49 actuation forces, rapid response times and long lifetimes. Their major disadvantage is that they 50 51 [4,11] 52 require high driving voltages to actuate (typically 500 V to 10 kV), and so a great deal of 53 54 research focuses on reducing this issue. Electronic EAPs can be divided further into subclasses, 55 56 [12–14] [15] 57 such as polymer electrets, electrostrictive graft elastomers and dielectric elastomers. In 58 59 the field of electronic EAPs, dielectric elastomers are a very interesting class of material, due 60 61 62 63 - 3 - 64 65 to high obtainable actuation speeds, large strains and high work densities, a high degree of 1 2 electromechanical coupling and good overall performance.[16,17] As a result of this unique 3 4 5 combination of properties, dielectric elastomers occupy a niche in transducer technologies, 6 7 mainly due to their low weight coupled with large strains. The focus of this review is therefore 8 9 10 exclusively on dielectric elastomers. 11 12 Dielectric elastomers are promising materials for advanced electromechanical applications such 13 14 as actuators, generators and sensors, due to their simple and flexible working principle. They 15 16 17 consist of an elastomer film sandwiched between two thin and compliant electrodes, thereby 18 19 forming a capacitor capable of energy transduction. The electrodes can be made from a variety 20 21 [18,19] [17] 22 of conducting materials such as silver and gold and carbon grease. For more details on 23 24 electrode systems an excellent recent review on electrode materials by Rosset and Shea[20] 25 26 27 exists. In this review we refer to the system of elastomer and electrode as a ‘dielectric elastomer 28 29 transducer’ (DET). When an external voltage is applied to the electrodes, electrostatic forces 30 31 are created. Electrostatic pressure acting on the film squeezes the elastomer in thickness, and 32 33 34 as the elastomer is incompressible it consequently expands in planar directions. Electrical 35 36 energy, in this case, is thus converted into mechanical energy. The driving force for the 37 38 39 actuation process is the resulting reduction in charge density when the electrode area is 40 41 enlarged.[21] When the external voltage is switched off, the elastomer film returns to its original 42 43 44 shape. The actuation working principle can be seen in Figure 1. 45 46 Dielectric elastomers can also be used for generators to create electrical energy, if the DET is 47 48 [22,23] 49 stretched by an external force and electrical charges are placed on the film. When the DET 50 51 is allowed to relax, elastic stresses work against electrical field pressure, thereby increasing 52 53 electrical energy. In this process opposite charges on the two electrodes are pushed further apart 54 55 56 as the film contracts and increases in thickness, while similar charges are brought closer 57 58 together as a result of the decreasing area of the elastomer, thus increasing energy density. 59 60 [24] 61 These changes increase the voltage of the charge, and the created energy can be harvested. 62 63 - 4 - 64 65 DETs have the potential to be used in novel applications which have not been possible 1 2 previously or feasible through the use of other technologies. Especially within the actuator 3 4 [25] 5 application area, DETs could provide novel solutions such as flat screen loud speakers, 6 7 lightweight morphing structures and prosthetic-like actuation, especially due to the flexibility 8 9 10 of the material, which offers the ability to be formed into complex shapes and still provide 11 12 actuation.[26–29] Other DET applications range from valves and pumps[30] to (bio-mimicking) 13 14 robotics,[31–33] Braille displays,[34–36] adaptable lenses and gratings,[37] motion sensors,[38] wave 15 16 [24] [39] 17 energy harvesting and active vibration control. The main advantage of DETs in these 18 19 applications over other transducers, however, is their ability for large displacements. In Figure 20 21 22 2 two examples are presented showing the extraordinary behaviour of dielectric elastomers, 23 24 namely a flying fish by the Swiss Federal Laboratories for Materials Science and Technology, 25 26 [40] 27 EMPA, illustrating the lightweight nature, and a wave-harvesting unit capable of large 28 29 strains.[41] 30 31 One of the most important components of a DET is the elastomer, as it governs dielectric 32 33 34 permittivity, dielectric breakdown strength and (in combination with the electrodes) obtainable 35 36 strain.
Load more

Recommended publications
  • Design and Development of Dielectric Elastomers and Elimination of Electromechanical Instability Under Equi-Biaxial Loading
    Technological University Dublin ARROW@TU Dublin Doctoral Engineering 2016 Design And Development Of Dielectric Elastomers And Elimination Of Electromechanical Instability Under Equi-Biaxial Loading. Liang Jiang Technological University Dublin Follow this and additional works at: https://arrow.tudublin.ie/engdoc Recommended Citation Jiang, L. (2016) Design and development of dielectric elastomers and elimination of electromechanical instability under equi-biaxial loading.Doctoral Thesis, Technological University Dublin. doi:10.21427/ D7J88Z This Theses, Ph.D is brought to you for free and open access by the Engineering at ARROW@TU Dublin. It has been accepted for inclusion in Doctoral by an authorized administrator of ARROW@TU Dublin. For more information, please contact [email protected], [email protected]. This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 4.0 License Design and Development of Dielectric Elastomers and Elimination of Electromechanical Instability under Equi-biaxial Loading by Liang Jiang, M.Sc. A thesis submitted to the Dublin Institute of Technology in partial fulfilment of the requirements for the degree of Doctor of Philosophy (Ph.D.) Supervisors: Prof. Stephen Jerrams, Dr. Anthony Betts and Prof. David Kennedy School of Mechanical and Design Engineering Dublin Institute of Technology April 2016 Abstract Dielectric elastomers (DEs) possess many useful properties including the capability of achieving large deformation, quietness of operation, high energy density and coupling efficiency. However, DEs generally require very high actuation electric field strength (> 100 V/µm) which can limit their useful lives. A DE with low Young‟s modulus, large elongation at break and high dielectric constant has the ability to exhibit high deformation under a relatively low electric field.
    [Show full text]
  • Worldwide Electroactive Polymers
    WW-EAP Newsletter, Vol. 16, No. 1, June 2014 (The 31th issue) WorldWide ElectroActive Polymers EAP (Artificial Muscles) Newsletter Vol. 16, No. 1 (31th issue) WW-EAP Newsletter June 2014 http://eap.jpl.nasa.gov FROM THE EDITOR As in recent years, this Smart Structure Yoseph Bar-Cohen, [email protected] Symposium included also the conference about This issue reports the latest progress in the fields of Biomimetics and this year the San Diego Zoo Electroactive Polymers (EAP) and biomimetics. presented a Tamandua, which is an Anteater The recent years’ growth of the field of EAP has (Figure 1). been quite well reflected in the number of papers that were submitted for presentation at the 2014 LIST OF CONTENTS SPIE EAPAD Conference that was held on March FROM THE EDITOR ..................................................... 1 10, 2014 in San Diego as part of the Smart GENERAL NEWS.......................................................... 2 Structures Symposium. It is pleasing to see that it Apple patent application - EAP actuator of iPhone camera 2 reached a record of 139 papers. Another significant Parker Acquired EAP IP and Licenses of AMI ................. 2 UPCOMING CONFERENCES ...................................... 2 accomplishment in the field of EAP is the 2015 SPIE EAPAD Conference ...................................... 2 University of Texas at Dallas’s developed Carbon- 15th International Symposium on Electrets (ISE15) ......... 2 Based Tensile and Torsional Artificial Muscles that RECENT CONFERENCES ...........................................
    [Show full text]
  • 1 Dielectric Silicone Elastomers with Mixed Ceramic Nanoparticles
    Dielectric silicone elastomers with mixed ceramic nanoparticles George Stiubianu 1*, Adrian Bele 1, Maria Cazacu 1, Carmen Racles 1, Stelian Vlad 1, Mircea Ignat 2 1“Petru Poni” Institute of Macromolecular Chemistry, Aleea Gr. Ghica Voda 41A, Iasi 700487 2National R&D Institute for Electrical Engineering ICPE-CA Bucharest, Splaiul Unirii 313, Bucharest- District 3, 030138 *e-mail: [email protected] , Phone: +40720042957, Corresponding author Abstract A ceramic material consisting in a zirconium dioxide-lead zirconate mixture has been obtained by precipitation method, its composition being proved by wide angle X-ray powder diffraction and energy-dispersive X-ray spectroscopy. The average diameter of the ceramic particles ranged between 50 and 100 nm, as revealed by Transmission Electron Microscopy images. These were surface treated and used as filler for a high molecular mass polydimethylsiloxane-α,ω-diol (Mn = 450000) prepared in laboratory, the resulted composites being further processed as films and crosslinked. A condensation procedure, unusual for polydimethylsiloxane having such high molecular masses, with a trifunctional silane was approached for the crosslinking. The effect of filler content on electrical and mechanical properties of the resulted materials was studied and it was found that the dielectric permittivity of nanocomposites increased in line with the concentration of ceramic nanoparticles. Keywords A. ceramics, A. composites, B. sol-gel chemistry, C. differential scanning calorimetry (DSC), D. dielectric properties 1 1.Introduction Silicone rubber is a well-known dielectric elastomer, which can be used for applications such as actuation and for devices able to convert electrical energy into mechanical energy and vice versa [1].
    [Show full text]
  • Reconfigurable Shape-Morphing Dielectric Elastomers Using
    Reconfigurable Shape-Morphing Dielectric Elastomers Using Spatially Varying Electric Fields Ehsan Hajiesmaili1 and David R. Clarke1* 1Harvard John A. Paulson School of Engineering and Applied Sciences, Cambridge, MA 02138, USA. Exceptionally large strains can be produced in soft elastomers by the application of an electric field and the strains can be exploited for a variety of novel actuators, such as tunable lenses and tactile actuators. However, shape morphing with dielectric elastomers has not been possible since no generalizable method for changing their Gaussian curvature has been devised. It is shown that this fundamental limitation can be lifted by introducing internal, spatially varying electric fields through a layer-by-layer fabrication method incorporating shaped, carbon-nanotubes-based electrodes between thin elastomer sheets. To illustrate the potential of the method, voltage-tunable negative and positive Gaussian curvatures shapes are produced. Furthermore, by applying voltages to different sets of internal electrodes, the shapes can be re-configured. All the shape changes are reversible when the voltage is removed. The natural world abounds with shapes that morph as they grow, ranging from the evolution of ripples on leaves1 to the complex folding of the human brain2. As their shapes change, geometrically their Gaussian curvature changes and, as understood from Gauss’s theorema egregium, this is only possible because the deformations are spatially inhomogeneous3. Bending, homogenous expansion, or homogeneous contraction do not change the Gaussian curvature, 1 defined as 휅 = 휅1휅2 = , where 휅1 and 휅2 are the principal curvatures of the surface and 푟1 푟1푟2 and 푟2 are radii of curvature. Therefore, under these deformations a body will not be able to morph from one shape to a fundamentally different one.
    [Show full text]
  • Dielectric Gels with Ultra-High Dielectric Constant, Low Elastic Modulus, And
    Shi et al. NPG Asia Materials (2018) 10: 821–826 DOI 10.1038/s41427-018-0077-7 NPG Asia Materials ARTICLE Open Access Dielectric gels with ultra-high dielectric constant, low elastic modulus, and excellent transparency Lei Shi1,RuisenYang2,ShiyaoLu1,KunJia2, Chunhui Xiao1,TongqingLu2, Tiejun Wang2,WeiWei1,HuiTan3 and Shujiang Ding1 Abstract We designed dielectric gels, a new type of polymer-based dielectric material. By using solvents with high dielectric constants, the gels achieve a unique combination of ultra-high dielectric constant, low elastic modulus, and excellent transparency, which are extremely challenging or impossible to realize with traditional polymer dielectrics. The gels exhibit high stretchability (stretch of approximately 10) and low mechanical hysteresis. We demonstrated the use of the dielectric gels by fabricating a bioinspired tunable lens, the focal length of which can be adjusted by varying the applied voltage. We believe that the dielectric gels, as a new type of polymer dielectric, offer new opportunities for soft robotics, sensors, electronics, optics, and biomimetics. Introduction elastomers9, electrostrictive polymers10, and dielectric fl 5 1234567890():,; 1234567890():,; 1234567890():,; 1234567890():,; As soft and exible electrical insulators, polymer elastomers . However, the high voltage needed for dielectrics have enabled diverse modern technologies, actuation and the poor mechanical reliability hinder including electric power systems1, flexible electronics2, developments in practical applications. Improving
    [Show full text]
  • Increasing the Performance of Dielectric Elastomer Actuators: A
    Increasing the performance of dielectric elastomer actuators: a review from the materials perspective L.J. Romasanta, M. A. Lopez-Manchado and R. Verdejo* Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Juan de la Cierva, 3 28006 Madrid, Spain Abstract Electro-active polymers (EAP) are emerging as feasible materials to mimic muscle-like actuation. Among EAPs, dielectric elastomer (DE) devices are soft or flexible capacitors, composed of a thin elastomeric membrane sandwiched between two compliant electrodes, that are able to transduce electrical to mechanical energy, actuators, and vice versa, generators. Initial studies concentrated mainly on dielectric elastomer actuators (DEAs) and identified the electro-mechanical principles and material requirements for an optimal performance. Those requirements include the need for polymers with high dielectric permittivity and stretchability and low dielectric loss and viscoelastic damping. Hence, attaining elastomeric materials with those features is the focus of current research developments. This review provides a systematic overview of such research, highlighting the advances, challenges and future applications of DEAs. Keywords: dielectric elastomers, actuators, artificial muscle, dielectric permittivity *Corresponding author: E-mail: [email protected]; Tel.: +34 91 258 7633; Fax: +34 91 564 4853 Table of contents 1. Introduction 2. Electro-active polymers (EAPs) 2.1. Ionic EAPs 2.2. Electronic EAPs 3. Electro-mechanical transduction in dielectric elastomers (DEs) 3.1. Working principles and equations of DE generators (DEGs) 3.2. Working principles and equations of DE actuators (DEAs) 4. Elastomeric matrices for application as DEA devices 5. Methods for enhancing the actuation performance of DEA devices 5.1. Reducing DE film thickness 5.2.
    [Show full text]
  • Euroeap 2012 Second International Conference on Electromechanically Active Polymer (EAP) Transducers & Artificial Muscles
    EuroEAP 2012 Second International conference on Electromechanically Active Polymer (EAP) transducers & artificial muscles Potsdam, Germany 29-30 May 2012 Technical programme Book of abstracts List of participants Contents Conference venue ............................................................................................... 3 Conference chairman .......................................................................................... 3 Local organization .............................................................................................. 3 Presentation of the EuroEAP conference series .................................................. 4 Conference committees ...................................................................................... 5 Tuesday, 29 May 2012 ....................................................................................... 7 General programme of the day ..................................................................... 7 Session 1.1 ................................................................................................... 8 Session 1.2 ................................................................................................. 11 Session 1.3 ................................................................................................. 23 Wednesday, 30 May 2012 ................................................................................ 35 General programme of the day ................................................................... 35 Session 2.1 ................................................................................................
    [Show full text]
  • 4D Printing of Soft Robotic Facial Muscles
    4D Printing of Soft Robotic Facial Muscles Jiyu Cai*, Austin Vanhorn*, Casey Mullikin*, Jennifer Stabach*, Zach Alderman*, and Wenchao Zhou* The AM3 Lab, Department of Mechanical Engineering, University of Arkansas at Fayetteville Fayetteville, AR, United States of America; email: [email protected] Abstract: 4D printing is an emerging technology that prints 3D structures with smart materials that can respond to external stimuli and change shape over time. 4D printing represents a major manufacturing paradigm shift from single-function static structures to dynamic structures with highly integrated functionalities. Direct printing of dynamic structures can provide great benefits (e.g., design freedom, reduced weight, volume, and cost) to a wide variety of applications, such as sensors and actuators, and robotics. Soft robotics is a new direction of robotics in which hard and rigid components are replaced by soft and flexible materials to mimic actuation mechanisms in life, which are crucial for dealing with uncertain and dynamic tasks or environments. However, little research on direct printing of soft robotics has been reported. This paper presents a study on 4D printing of soft robotic facial muscles. Due to the short history of 4D printing, only a few smart materials have been successfully 4D printed, such as shape memory and thermo-responsive polymers, which have relatively small strains (~8%). In order to produce the large motion needed for facial muscles, dielectric elastomer actuators (DEAs), operating like a capacitor with a sheet of elastomer sandwiched by two compliant electrodes and known as artificial muscle for its high elastic energy density and capability of producing large strains (~200%) compared to other smart materials, is chosen as the actuator for our robotic facial muscles.
    [Show full text]
  • Dielectric Properties of Graphene/Titania/Polyvinylidene Fluoride (G/Tio2/PVDF) Nanocomposites
    materials Article Dielectric Properties of Graphene/Titania/Polyvinylidene Fluoride (G/TiO2/PVDF) Nanocomposites Saira Ishaq 1,2,3 , Farah Kanwal 1,*, Shahid Atiq 4 , Mahmoud Moussa 2,3, Umar Azhar 2 and Dusan Losic 2,3,* 1 Institute of Chemistry, University of the Punjab, Lahore 54590, Pakistan; [email protected] 2 School of Chemical Engineering, The University of Adelaide, Adelaide, SA 5005, Australia; [email protected] (M.M.); [email protected] (U.A.) 3 The ARC Research Hub for Graphene Enabled Industry Transformation, The University of Adelaide, Adelaide, SA 5005, Australia 4 Centre of Excellence in Solid State Physics, University of the Punjab, Lahore 54590, Pakistan; [email protected] * Correspondence: [email protected] (F.K.); [email protected] (D.L.); Tel.: +92-300-420-5680 (F.K.); +61-88-313-4648 (D.L.) Received: 24 November 2019; Accepted: 31 December 2019; Published: 3 January 2020 Abstract: Flexible electronics have gained eminent importance in recent years due to their high mechanical strength and resistance to environmental conditions, along with their effective energy storage and energy generating abilities. In this work, graphene/ceramic/polymer based flexible dielectric nanocomposites have been prepared and their dielectric properties were characterized. The composite was formulated by combining graphene with rutile and anatase titania, and polyvinylidene fluoride in different weight ratios to achieve optimized dielectric properties and flexibility. After preparation, composites were characterized for their morphologies, structures, functional groups, thermal stability and dielectric characterizations by using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, thermal gravimetric analysis and impedance spectroscopy.
    [Show full text]
  • The Current State of Silicone-Based Dielectric Elastomer Transducers
    Downloaded from orbit.dtu.dk on: Oct 04, 2021 The Current State of Silicone-Based Dielectric Elastomer Transducers Madsen, Frederikke Bahrt; Daugaard, Anders Egede; Hvilsted, Søren; Skov, Anne Ladegaard Published in: Macromolecular Rapid Communications Link to article, DOI: 10.1002/marc.201500576 Publication date: 2016 Document Version Peer reviewed version Link back to DTU Orbit Citation (APA): Madsen, F. B., Daugaard, A. E., Hvilsted, S., & Skov, A. L. (2016). The Current State of Silicone-Based Dielectric Elastomer Transducers. Macromolecular Rapid Communications, 37(5), 378-413. https://doi.org/10.1002/marc.201500576 General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Users may download and print one copy of any publication from the public portal for the purpose of private study or research. You may not further distribute the material or use it for any profit-making activity or commercial gain You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Complete Manuscript DOI: 10.1002/marc.((insert number)) ((or ppap., mabi., macp., mame., mren., mats.)) 1 2 Review 3 4 5 The current state of silicone-based dielectric elastomer transducers 6 7 Frederikke B. Madsen, Anders E. Daugaard, Søren Hvilsted and Anne L.
    [Show full text]
  • Theory of Dielectric Elastomers⋆⋆
    Acta Mechanica Solida Sinica, Vol. 23, No. 6, December, 2010 ISSN 0894-9166 Pu b lish ed by A MS S Press, Wu h an , Ch in a THEORY OF DIELECTRIC ELASTOMERS⋆⋆ ⋆ Z hig ang Suo (School of Engineering and Applied Sciences, Kavli Institute for Nanobio Science and Technology, Harvard University, Cambridge, MA 02138, USA) Received 25 October 2010, revision received 30 November 2010 ABSTRACT In response to a stimulus, a soft material deforms, and the deformation provides a function. We call such a material a soft active material (SAM). This review focuses on one class of soft active materials: dielectric elastomers. When a membrane of a dielectric elastomer is subject to a voltage through its thickness, the membrane reduces thickness and expands area, possibly straining over 100%. The dielectric elastomers are being developed as transducers for broad applications, including soft robots, adaptive optics, Braille displays, and electric generators. This paper reviews the theory of dielectric elastomers, developed within continuum mechanics and thermodynamics, and motivated by molecular pictures and empirical observations. The the- ory couples large deformation and electric potential, and describes nonlinear and nonequilibrium behavior, such as electromechanical instability and viscoelasticity. The theory enables the finite element method to simulate transducers of realistic configurations, predicts the efficiency of elec- tromechanical energy conversion, and suggests alternative routes to achieve giant voltage-induced deformation. It is hoped that the theory will aid in the creation of materials and devices. KEY WORDS soft active material, dielectric elastomer, electromechanical instability, large de- formation, transducer I. INTRODUCTION 1.1. Soft Active Materials for Soft Machines The convergence of parts of biology and engineering has created exciting opportunities of discovery, invention and commercialization.
    [Show full text]
  • Worldwide Electroactive Polymers
    WW-EAP Newsletter, Vol. 20, No. 1, June 2018 (The 39th issue) WorldWide ElectroActive Polymers EAP (Artificial Muscles) Newsletter Vol. 20, No. 1 (39th issue) WW-EAP Newsletter June 2018 http://eap.jpl.nasa.gov FROM THE EDITOR ABOUT THE EXPERTS Yoseph Bar-Cohen, [email protected] Herbert Shea was promoted to Full This Newsletter issue reports the latest progress in Professor the fields of Electroactive Polymers (EAP) and In December 2017, Biomimetics. Herbert Shea was LIST OF CONTENTS promoted to Full FROM THE EDITOR ..................................................... 1 Professor of ABOUT THE EXPERTS ............................................... 1 Microtechnology in Herbert Shea was promoted to Full Professor .................. 1 the Ecole GENERAL NEWS ......................................................... 1 Polytechnique Standard for EAP .......................................................... 2 Fédérale de UPCOMING CONFERENCES ...................................... 2 2019 SPIE EAPAD Conference ...................................... 2 Lausanne (EPFL), TECHNOLOGY DEVELOPMENT CHALLENGES ... 2 Switzerland. Over Seeking concepts of autonomous fully controllable the course of his "endoscope" ............................................................ 2 successful RECENT CONFERENCES ........................................... 3 scientific career, Herb has conducted research in a 2018 SPIE EAPAD Conference ...................................... 3 wide range of fields relating to applied physics and ADVANCES IN EAP ..................................................
    [Show full text]