Hydraulics and Hydraulic Machinery

Total Page：16

File Type：pdf, Size：1020Kb

R18 B.TECH CIVIL ENGG. CE409PC: HYDRAULICS & HYDRAULIC MACHINERY LAB B.Tech. II Year II Sem. LT/P/DC 00/3/0 1.5 Course Objectives To identify the behavior of analytical models introduced in lecture to the actual behavior of real fluid flows. To explain the standard measurement techniques of fluid mechanics and their applications. To illustrate the students with the components and working principles of the Hydraulic machines- different types of Turbines, Pumps, and other miscellaneous hydraulics machines. To analyze the laboratory measurements and to document the results in an appropriate format. Course Outcomes: Students who successfully complete this course will have demonstrated ability to: Describe the basic measurement techniques of fluid mechanics and its appropriate application. Interpret the results obtained in the laboratory for various experiments. Discover the practical working of Hydraulic machines- different types of Turbines, Pumps, and other miscellaneous hydraulics machines. Compare the results of analytical models introduced in lecture to the actual behavior of real fluid flows and draw correct and sustainable conclusions. Write a technical laboratory report List of Experiments 1. Verification of Bernoulli’s equation 2. Determination of Coefficient of discharge for a small orifice by a constant head method 3. Calibration of Venturimeter / Orifice Meter 4. Calibration of Triangular / Rectangular/Trapezoidal Notch 5. Determination of Minor losses in pipe flow 6. Determination of Friction factor of a pipe line 7. Determination of Energy loss in Hydraulic jump 8. Determination of Manning’s and Chezy’s constants for Open channel flow. 9. Impact of jet on vanes 10. Performance Characteristics of Pelton wheel turbine 11. Performance Characteristics of Francis turbine 12. Performance characteristics of Keplan Turbine 13. Performance Characteristics of a single stage / multi stage Centrifugal Pump .

Copy Link

Recommended publications

DEPARTMENT of ENGINEERING Course CE 41800 – Hydraulics
DEPARTMENT OF ENGINEERING Course CE 41800 – Hydraulics Engineering Type of Course Required for Civil Engineering Program Catalog Description Sources and distribution of water in urban environment, including surface reservoir requirements, utilization of groundwater, and distribution systems. Analysis of sewer systems and drainage courses for the disposal of both wastewater and storm water. Pumps and lift stations. Urban planning and storm drainage practice. Credits 3 Contact Hours 3 Prerequisite Courses CE 31800 Corequisite Courses None Prerequisites by Fluid Mechanics Topics Textbook Larry Mays, Water Resources Engineering, John Wiley Publishing Company, Current Edition. Course Objectives Students will understand and be able to apply fundamental concepts and techniques of hydraulics and hydrology in the analysis, design, and operation of water resources systems. Course Outcomes Students who successfully complete this course will be able to: 1. Become familiar with different water resources terminology like hydrology, ground water, hydraulics of pipelines and open channel. [a] 2. Understand and be able to use the energy and momentum equations. [a] 3. Analyze flow in closed pipes, and design and selection of pipes including sizes. [a, c, e] 4. Understand pumps classification and be able to develop a system curve used in pump selection. [a, c, e] 5. Design and select pumps (single or multiple) for different hydraulic applications. [a, c, e] Department Syllabus CE – 41800 Page | 1 6. Become familiar with open channel cross sections, hydrostatic pressure distribution and Manning’s law. [a] 7. Determine water surface profiles for gradually varied flow in open channels. [a, e] 8. Familiar with drainage systems and wastewater sources and flow rates.
[Show full text]
Intelligent Hydraulics in New Dimensions. Industrial Hydraulics from Rexroth You Have Our Full Support
Intelligent Hydraulics in New Dimensions. Industrial Hydraulics from Rexroth You Have Our Full Support. Our Dedication is to Your Success With its extensive product range and outstanding application expertise, Rexroth is the technological and market leader in industrial hydraulics. You benefit from the world’s broadest range of standard products, application-adapted products, and special cus- tomized solutions for industrial hydraulics. Teams operating worldwide engineer and deliver complete turnkey systems. Rexroth is the ideal partner for the development of highly efficient plant and machinery—from the initial contact through to commissioning and for the application’s entire life cycle. Extra quality is ensured by Rexroth’s internal quality standards that go beyond the ISO standards and extends our performance specifications consistently to the upper limits. It is precisely in international large-scale projects and research projects that the company’s financial strength forms a firm foun- dation. All over the world, Rexroth can provide you with skilled advice, support, and exceptional service—with its own distribution and service companies in 80 countries. Hydraulics 3 If You Expect Quality, You’re in Good Hands With Rexroth As the world’s leading supplier of industrial hydraulics, Rexroth occupies a prominent position with its parts, systems and specially adapted electronic components. With Rexroth, builders of machines and plant have access to products that consistently set new standards of perfor- mance and quality. Rexroth’s Industrial Hydraulics division located in Bethlehem, Pennsylvania designs and manufactures high-performance, high-productivity hydraulic power units, systems and com- ponents using world-class technologies. Rexroth supports applications in the machine tool and plastics processing machinery, metal forming, civil engineering, power genera- tion, test machinery and simulation, entertainment, presses, automotive, transportation, marine and offshore technology, and wood processing markets.
[Show full text]
Design of Hydraulic Structures 89, Albertson & Kia (Eds) © 1989 Balkema, Rotterdam
P AP-SEi5 PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON DESIGN OF HYDRAULIC STRUCTURES / FORT COLLINS, COLORADO / 26-29 JUNE 1989 Design of Hydraulic ructures 89 HYDRAULICS BRANCH St OFFICIAL FILE COPY Edited by MAURICE L.ALBERTSON Department of Civil Engineering, Colorado State University, Fort Collins, USA T RAHIM A.KIA Mahab G. Consulting Eng., Tehran, Iran resently: Department of Civil Engineering, Colorado State University, ort Collins, USA OFFPRINT (3— Bureau of Reclamation HYDRAULICS BRANCH RI WHEN BORROWED RETURN PROMPTLY A.A.BALKEMA / ROTTERDAM / BROOKFIELD / 1989 Design of Hydraulic Structures 89, Albertson & Kia (eds) © 1989 Balkema, Rotterdam. ISBN 90 6191 898 7 The role of hydraulic modeling in development of innovative spillway concepts Philip H.Burgi Bureau of Reclamation, Denver, Colo., USA ABSTRACT: The use of hydraulic models to develop and verify the intricate design of waterways to pass flood flows has been closely associated with the development of hydraulic structures over the past 50 years. Since the mid-30's, the Bureau of Reclamation has used laboratory models to develop spillways for large dams such as Hoover, Grand Coulee, Glen Canyon, Yellowtail, and Morrow Point Dams. Documented reports and generalized design criteria have been developed to summarize the results of these investigations. In recent years, Reclamation has developed various innovative spillway concepts which have resulted in cost effective designs for hydraulic structures. This paper will summarize recent laboratory investigations for labyrinth, stepped, and fuse plug spillway concepts as well as retrofit concepts using aerators on spillways and downstream slope protection systems for overtopping low-head embankments. INTRODUCTION Physical model studies are used to investigate the anticipated performance of hydraulic structures.
[Show full text]
Hydraulic Hints & Trouble Shooting Guide
Vickers® General Product Support Hydraulic Hints & Trouble Shooting Guide Revised 8/96 694 General Hydraulic Hints . 3 Troubleshooting Guide & Maintenance Hints . 4 Chart 1 Excessive Noise . 5 Chart 2 Excessive Heat . 6 Chart 3 Incorrect Flow . 7 Chart 4 Incorrect Pressure . 8 Chart 5 Faulty Operation . 9 Quiet Hydraulics . 10 Contamination Control . 11 Hints on Maintenance of Hydraulic Fluid in the System. 13 Aeration . 14 Leakage Control . 15 Hydraulic Fluid and Temperature Recommendations for Industrial Machinery. 16 Hydraulic Fluid and Temperature Recommendations for Mobile Hydraulic Systems. 19 Oil Viscosity Recommendations . 20 Pump Test Procedure for Evaluation of Antiwear Fluids for Mobile Systems. 21 Oil Flow Velocity in Tubing . 23 Pipe Sizes and Pressure Ratings . 24 Preparation of Pipes, Tubes and Fittings Before Installation in a Hydraulic System. 25 ISO/ANSI Basic Symbols for Fluid Power Equipment and Systems. 26 Conversion Factors . 29 Hydraulic Formulas . 29 2 General Hydraulic Hints Good Assembly Pipes Tubing Do’s And Don’ts Practices Iron and steel pipes were the first kinds Don’t take heavy cuts on thin wall tubing of plumbing used to conduct fluid with a tubing cutter. Use light cuts to Most important – cleanliness. between system components. At prevent deformation of the tube end. If All openings in the reservoir should be present, pipe is the least expensive way the tube end is out or round, a greater to go when assembling a system. possibility of a poor connection exists. sealed after cleaning. Seamless steel pipe is recommended No grinding or welding operations for use in hydraulic systems with the Ream tubing only for removal of burrs.
[Show full text]
Hydraulics Manual Glossary G - 3
Glossary G - 1 GLOSSARY OF HIGHWAY-RELATED DRAINAGE TERMS (Reprinted from the 1999 edition of the American Association of State Highway and Transportation Officials Model Drainage Manual) G.1 Introduction This Glossary is divided into three parts: · Introduction, · Glossary, and · References. It is not intended that all the terms in this Glossary be rigorously accurate or complete. Realistically, this is impossible. Depending on the circumstance, a particular term may have several meanings; this can never change. The primary purpose of this Glossary is to define the terms found in the Highway Drainage Guidelines and Model Drainage Manual in a manner that makes them easier to interpret and understand. A lesser purpose is to provide a compendium of terms that will be useful for both the novice as well as the more experienced hydraulics engineer. This Glossary may also help those who are unfamiliar with highway drainage design to become more understanding and appreciative of this complex science as well as facilitate communication between the highway hydraulics engineer and others. Where readily available, the source of a definition has been referenced. For clarity or format purposes, cited definitions may have some additional verbiage contained in double brackets [ ]. Conversely, three “dots” (...) are used to indicate where some parts of a cited definition were eliminated. Also, as might be expected, different sources were found to use different hyphenation and terminology practices for the same words. Insignificant changes in this regard were made to some cited references and elsewhere to gain uniformity for the terms contained in this Glossary: as an example, “groundwater” vice “ground-water” or “ground water,” and “cross section area” vice “cross-sectional area.” Cited definitions were taken primarily from two sources: W.B.
[Show full text]
780 Solid Waste Maintenance Technician
780 Solid Waste Maintenance Technician Nature of Work This is skilled mechanical and maintenance work performing a variety of activities associated with the repair and routine maintenance of a variety of solid waste trucks and machinery used for solid waste operations. Activities associated with the job include performing routine preventive maintenance, safety inspections and repair work on all trucks, machinery and equipment, changing and repairing large truck tires, and assisting with building maintenance and repair activities. Additional activities include diagnosing vehicle components and/or equipment malfunctions, performing minor body work and welding and fabricating parts when required, repairing hydraulic equipment located at convenience centers and assisting with transfer station and landfill operations when necessary. Job duties require considerable knowledge and experience in vehicle repair and maintenance, hydraulics, welding, air conditioning repair and metal fabrication, considerable knowledge of building maintenance and repair activities, good organizational, interpersonal and decision making skills and sufficient strength and agility to perform the physically demanding aspects of the job in a variety of weather conditions. Job performance is evaluated by the Solid Waste Director through review of daily repair work and preventive maintenance activities on trucks and machinery, level of support provided for building maintenance activities, accuracy of job related information related to the procurement and purchase of parts and equipment, diagnostic capabilities and quality of the repair work performed. Illustrative Examples of Work -Performs minor repair work and preventive maintenance activities on solid waste trucks, vehicles, machinery and equipment. -Troubleshoots and diagnoses equipment malfunctions to determine needed repairs. -Rebuilds and/or repairs electrical, cooling, suspension, and braking components and systems.
[Show full text]
Estimating Reversible Pump-Turbine Characteristics
A WATER RESOURCES TECHNICAL PUBLICATION ENGINEERING MONOGRAPH NO. 39 Estimating Reversible Pump-TurbineCharacteristics UNtTED STATES DEPARTMENT OF THE INTERIOR BUREAU OF RECLAMATlON MS-230 (l-76) Bureau of Reclamation TECHNICAL REiPORT STANDARD TITLE PAG 3. RECIPIENT’S CATALOG NO. 4. TITLE AND SUBTITLE 5. REPORT DATE Estimating Reversible Pump-Turbine December 1977 Characteristics 6. PERFORMING ORGANIZATION CODE 7. AUTHOR(S) 6. PERFORMING ORGANIZATION REPORT NO. R. S. Stelzer and R. N. Walters Engineering Monograph 39 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. WORK UNIT NO. Engineering and Research Center Bureau of Reclamation 11. CONTRACT OR GRANT NO. Denver, CO 80225 13. TYPE OF REPORT AND PERIOD COVERED 2. SPONSORING AGENCY NAME AND ADDRESS Same 14. SPONSORING AGENCY CODE 5. SUPPLEMENTARY NOTES 6. ABSTRACT The monograph presents guidelines for designers who plan or maintain pump-turbine installations. Data are presented on recent installations of pump-turbines which include figures showing operating characteristics, hydraulic performance, and sizing of the unit. Specific speed, impeller/ runner diameter, and the best efficiency head and discharge were aelectei as the criteria that characterize the unit performance. 7. KEY WORDS AND DOCUMENT ANALYSIS I. DESCRIPTORS-- / pumped storage/ *pump turbines/ powerplants/ reversible turbines/ Francis turbines/ pumps/ power head/ turbine efficiency/ specific speed/ cavitation index/ hydraulic machinery/ design criteria ). IDENTIFIERS-- / Flatiron Powerplant, CO/ Mt. Elbert Pumped-Storage Power- plant, CO/ Grand Coulee Pumping Plant, WA/ San Luis Pumping-Generating/ Senator Wash Dam, CA/ :. COSATI Field/Group 13G COWRR: 1307.1 6. DISTRIBUTION STATEMENT 19. SECURITY CLASS pt. NO. OF PAGI ITHIS REPORT) \voiloble from the National Technical Information Service, Operations UNCLASSIFIED division, Springfield.
[Show full text]
Basic Hydraulics and Components
Pub.ES-100-2 BASIC HYDRAULICSANDCOMPONENTS BASIC HYDRAULICS AND COMPONENTS OIL HYDRAULIC EQUIPMENT ■ Overseas Business Department Hamamatsucho Seiwa Bldg., 4-8, Shiba-Daimon 1-Chome, Minato-ku, Tokyo 105-0012 JAPAN TEL. +81-3-3432-2110 FAX. +81-3-3436-2344 Preface This book provides an introduction to hydraulics for those unfamiliar with hydraulic systems and components, such as new users, novice salespeople, and fresh recruits of hydraulics suppliers. To assist those people to learn hydraulics, this book offers the explanations in a simple way with illustrations, focusing on actual hydraulic applications. The first edition of the book was issued in 1986, and the last edition (Pub. JS-100-1A) was revised in 1995. In the ten years that have passed since then, this book has become partly out-of-date. As hydraulic technologies have advanced in recent years, SI units have become standard in the industrial world, and electro-hydraulic control systems and mechatronics equipment are commercially available. Considering these current circumstances, this book has been wholly revised to include SI units, modify descriptions, and change examples of hydraulic equipment. Conventional hydraulic devices are, however, still used in many hydraulic drive applications and are valuable in providing basic knowledge of hydraulics. Therefore, this edition follows the preceding edition in its general outline and key text. This book principally refers hydraulic products of Yuken Kogyo Co., Ltd. as example, but does mention some products of other companies, with their consent, for reference to equipment that should be understood. We acknowledge courtesy from those companies who have given us support for this textbook.
[Show full text]
16-1 Attachment 3 Glossary of Terminology for Hydraulics & Scour
Memo to Designers 16-1A • December 2017 LRFD SupersedesSupersedes MemoMemo toto DesignersDesigners 1-231-23 DatedDated OctoberOctober 20032003 Attachment 3 Glossary Of Terminology For Hydraulics & Scour Definitions (refer to AASHTO LRFD-BDS-CA Section 2.2) Common terminology has been defined below for easy reference. Abutment Scour Abutment scour is essentially a form of scour at a short contraction. Accordingly, scour is closely influenced by flow distribution through the short contraction and by turbulence generated and dispersed in the form of eddies and vortices, by flow entering the short contraction. Aggradation General and progressive buildup (long term) of the longitudinal profile of a channel bed due to sediment deposition. Backwater The increase in water surface elevation relative to its elevation occurring under natural channel and floodplain conditions. It is induced by a bridge or other structure that obstructs or constricts the free flow of water that occurs in a channel. Bank Protection: Engineering works for the purpose of protecting streambanks from erosion. Base Flood Discharge associated with the 100-year flood recurrence interval. Base floodplain Floodplain associated with the flood with a 100-year occurrence interval. Bedrock The solid rock exposed at the surface of the earth or overlain by soils and unconsolidated material. Bridge Waterway The cross-sectional area of a bridge opening available for flow, as measured below a specified stage and normal to the principal direction of flow. Bulking Increasing the water discharge to account for high concentrations of sediment in the flow. Channel Profile A plot of the stream channel elevations relative to distance separating them along the length of the channel that generally can be assumed as a channel gradient.
[Show full text]
Hydraulics Heroes
Hydraulics Heroes An introduction to five influential scientists, mathematicians and engineers who paved the way for modern hydraulics: our hydraulics heroes. www.hydraulicsonline.com Hydraulics Online e-book series: Sharing our knowledge of all things hydraulic About Hydraulics Online Hydraulics Online is a leading, award-winning, ISO 9001 accredited provider of customer-centric fluid power solutions to 130 countries and 24 sectors worldwide. Highly committed employees and happy customers are the bedrock of our business. Our success is built on quality and technical know-how and the fact that we are 100% independent – we provide truly unbiased advice and the most optimal solutions for our customers. Every time. RITISH B T E R G U S A T T I Q R E U H A L Y I T Hydraulics Heroes We invite you to meet five of our hydraulics heroes: Hydraulics Online e-book series: Benedetto Castelli (c.1577 – 1642) Sharing our knowledge of all things hydraulic Blaise Pascal (1623 – 1662) Joseph Bramah (1748 – 1814) Jean Léonard Marie Poiseuille (1799 – 1869) William Armstrong (1810 – 1900) Hydraulics Online e-book: Hydraulics Heroes P. 3 www.hydraulicsonline.com Benedetto Castelli Benedetto Castelli (c.1577 – 1642) is celebrated for his work in astronomy and hydraulics. His most celebrated work is Della Misura delle Acque Correnti – On the Measurement of Running Water – which was published in 1629. In this work, Castelli established the continuity principle, which is still central to all modern hydraulics. A supporter and colleague of Galileo, Benedetto was born the eldest of seven children of a wealthy landowner. It is not known exactly when he was born, but it is thought to be 1577 or 1578.
[Show full text]
Hydraulic Machinery • Turbine Is a Device That Extracts Energy from a Fluid (Converts the Energy Held by the Fluid to Mechanical Energy)
Hydraulic Machines power point presentation Slides has been adapted from Hydraulic Machines, K. Subramanya 2016-2017 Prepared by Dr. Assim Al-Daraje 1 Chapter (1 Part 1) Prepared by Dr. Assim Al-Daraje INTRODUCTION 2 Hydraulic machinery • Turbine is a device that extracts energy from a fluid (converts the energy held by the fluid to mechanical energy) • Pumps are devices that add energy to the fluid (e.g. pumps, fans, blowers and compressors). 3 INTRODUCTION Fluid-flow machines are very broadly classified as turbo-machines and positive displacement machines. A turbo-machine is a device that adds energy to a fluid or extracts energy from the fluid by virtue of a rotating system of blades. These machines require a rotating element called rotor and relative motion between the fluid and the rotor. 4 If the machine adds energy it is called a pump; if it extracts energy it is called a turbine. The fluid to be pumped can be in incompressible mode throughout its passage in the machine or compressibility effects may come in to picture at different phases of its interaction in the machine. If the fluid is water, the pump device is labeled as water pump. 5 Turbines • J.V. Poncelet first introduced the idea of the development of mechanical energy through hydraulic energy • Modern hydraulic turbines have been developed by L.A. Pelton (impulse), G. Coriolis and J.B. Francis (reaction) and V Kaplan (propeller) 6 A-Pelton Wheel, B-Francis, Turbine, C-Kaplan Turbine 7 Pelton (impulse) 8 9 Kaplan (propeller) 10 11 Turbines • Hydro electric power is the most remarkable development pertaining to the exploitation of water resources throughout the world • Hydroelectric power is developed by hydraulic turbines which are hydraulic machines.
[Show full text]
Chapter 1 Overview of Hydraulics and Objective of the Notes
1.1 Chapter 1 Overview of hydraulics and objective of the notes 1.1 Introduction In these notes, we shall not be using a lot of detailed written text or explanations except where we feel it is absolutely necessary. We shall, in many cases, present equations without proof as the derivations are done in great detail in the cited references. 1.2 Advantages and disadvantages Hydraulic systems have many well defined advantages over their mechanical or electrical counterparts. They have a very good power to weight ratio; that is they can deliver a significant power to a load with a relatively small mass. This makes them very appealing for aircraft applications where weight is all important. The components are self lubricating which helps assist in prolonging the life of the components (for a clean fluid that is) and for smooth positioning applications. The movement of the fluid helps to draw away heat from “hot spots”. The systems can operate in a very wide range of operating environments such as those found in extreme temperature variations (performance can degrade though). Sudden starts, stops and especially, reversal of motion can readily be accommodated by hydraulic systems Hydraulic systems can readily be interfaced with electronic or microprocessor based controllers. However, hydraulic systems suck when it comes to efficiency. They are most certainly less efficient than both mechanical and electrical transmission systems. Overall efficiencies in the order of 60-70% are not uncommon in individual components and this efficiency can be cut in half depending on the type of circuit they are used in.
[Show full text]