DOCSLIB.ORG

Tall Oil Fatty Acid a Sustainable Solution for the Industry

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tall Oil Fatty Acid a Sustainable Solution for the Industry Tall Oil Fatty Acid A Sustainable Solution for the industry Pine Chemicals Overview - Kraft Pulping Process Digester Crude Sulfate Turpentine (CST) Wood Chips Terpenes Pulp & Paper Black Liquor Soap (BLS) Sodium Carboxylate Acidulation Carboxylic Acid (with H2SO4) Crude Tall Oil (CTO) 2 Pine Chemical Bio-Refinery Overview Crude Tall Oil Fractions Palmitic Heads Tall Oil Fatty Acids (TOFA) Distilled Tall Oil (DTO) Crude Tall Oil Rosin Acids (CTO) (TOR) Tall Oil Pitch 3 CHEMICALS + WORLD CLASS LONG LASTING OR STRATEGIC PULP INDUSTRY BIO-REFINERIES SUPPLY AGREEMENTS BLS/CTO/CST . 3 America . 2 Europe Excellent Sustainable Supply Diversified Quality & Product . Biobased, Traceable Security Portfolio . Non Edible/Non-GMO Consistency . Low Carbon Footprint . No Land Usage Change Sustainability benefits of Tall Oil Fatty Acids PALM FREE! 5 100% biobased and certified 6 Responsibly managed forests Soybean, Palm Oil cultivation may lead to deforestation, land use change (LUC). Consequence Pine Trees SYLFAT™ TOFA would be a larger GWP (Global Warming Potential), since forests would no longer be available as CO2 storage facilities. Rainforest -> SBO – Palm oil 7 Non food Tall Oil Fatty Acid derivatives are not in competition with the food chain. CTO is generated as by product from the paper pulp industry. Upgraded to industrial value add products such as TOFA, Dimer, Polyamides … delivering superior properties such as fast drying time / hardness / durability. 8 Minimal land use change: CO2 impact Rainforest SYLFAT™2 TOFA CO2 eq / Kg is 0.691kg of which LUC contribution is negligible 9 Carbon footprint savings: practical SOFA from Brazil @11,17 Kg CO2 eq/Kg SYLFAT™ 2 TOFA @ 0.691 Kg CO2 eq/kg 1000T SOFA replaced by 1000T SYLFAT™ 2 TOFA delivers 10479 T CO2eq reduction Return Brussels – New York 1 seat is equivalent of 0.86 T CO2 12185 returns Route 66 Harley Davidson road trip 1 trip is 0.53 T CO2 19772 trips https://www.carbonfootprint.com/calculator.aspx 10 non GMO sourced raw material Chain of custody • FSC (Forest Stewardship Council): The organization shall not use genetically modified organisms. • PEFC (Program for the endorsement of Forest Certification): The organization shall not include any material from genetic modified origin • SFI labeling (Sustainable Forest Initiative): Use of fiber from genetically modified forestry is not allowed 11 Legal Disclaimer Kraton Corporation and all of its affiliates, including Arizona Chemical, believe the information set forth herein to be true and accurate, but any recommendations, presentations, statements or suggestions that may be made are without any warranty or guarantee whatsoever, and shall establish no legal duty on the part of any Kraton affiliated entity. The legal responsibilities of any Kraton affiliate with respect to the products described herein are limited to those set forth in Kraton’s Conditions of Sale or any effective sales contract. NOTE TO USER: by ordering/receiving Kraton product you accept the Kraton Conditions of Sale applicable in the region. All other terms are rejected. Kraton does not warrant that the products described herein are suitable for any particular uses, including, without limitation, cosmetics and/or medical uses. Persons using the products must rely on their own independent technical and legal judgment, and must conduct their own studies, registrations, and other related activities, to establish the safety and efficacy of their end products incorporating any Kraton products for any application. Nothing set forth herein shall be construed as a recommendation to use any Kraton product in any specific application or in conflict with any existing patent rights. Kraton reserves the right to withdraw any product from commercial availability and to make any changes to any existing commercial or developmental product. Kraton expressly disclaims, on behalf of all Kraton affiliates, any and all liability for any damages or injuries arising out of any activities relating to the use of any information set forth in this publication, or the use of any Kraton products. KRATON and the Kraton logo are either trademarks or registered trademarks of Kraton Corporation, or its subsidiaries or affiliates, in one or more, but not all countries. ©2018-2019 Kraton Corporation 12.
Load more

Recommended publications
  • Understanding Matboard
    FRAMING FUNDAMENTALS by Jared Davis, MCPF, GCF Understanding Matboard Being the best frame shop in your area starts with the best products. atboard is a fundamental compo- Mnent of almost every framed pic- ture. However, understanding the vast range of information and choices avail- able in matboards can be daunting. In this article, I aim to provide some useful insights about matboard to help you to dispel some of the myths and decipher some of the facts about this vital aspect of our profession. The two primary purposes for matboard that the introduction of a matboard can in- Different grades of matboard are are to provide protection for the artwork and crease both the size and level of value in the designed for to enhance the framing design. sale of a frame. different appli- cations. Under- 1) Protect. The last consumer survey con- standing which choice to make is ducted by the Professional Picture Fram- How Matboard is Made important to both ers Association found that the num- Matboards are comprised of layers of pa- your customer and your business. ber-one reason why a consumer chose to per of various thickness, laminated together. custom frame an artwork was to protect The papers and core of a matboard are made the item. Preservation, clearly, is of prima- from either unpurified wood pulp, purified al- ry importance to your customer. pha-cellulose wood pulp, or in the case of mu- 2) Enhance. A matboard can help the view- seum-grade board, cotton linter pulp. er to focus correctly on the image.
    [Show full text]
  • The Miracle Resource Eco-Link
    Since 1989 Eco-Link Linking Social, Economic, and Ecological Issues The Miracle Resource Volume 14, Number 1 In the children’s book “The Giving Tree” by Shel Silverstein the main character is shown to beneÞ t in several ways from the generosity of one tree. The tree is a source of recreation, commodities, and solace. In this parable of giving, one is impressed by the wealth that a simple tree has to offer people: shade, food, lumber, comfort. And if we look beyond the wealth of a single tree to the benefits that we derive from entire forests one cannot help but be impressed by the bounty unmatched by any other natural resource in the world. That’s why trees are called the miracle resource. The forest is a factory where trees manufacture wood using energy from the sun, water and nutrients from the soil, and carbon dioxide from the atmosphere. In healthy growing forests, trees produce pure oxygen for us to breathe. Forests also provide clean air and water, wildlife habitat, and recreation opportunities to renew our spirits. Forests, trees, and wood have always been essential to civilization. In ancient Mesopotamia (now Iraq), the value of wood was equal to that of precious gems, stones, and metals. In Mycenaean Greece, wood was used to feed the great bronze furnaces that forged Greek culture. Rome’s monetary system was based on silver which required huge quantities of wood to convert ore into metal. For thousands of years, wood has been used for weapons and ships of war. Nations rose and fell based on their use and misuse of the forest resource.
    [Show full text]
  • Basics of Kraft Pulping
    Lignin Wood is composed of many chemical components, primarily extractives, carbohydrates, and lignin, which are distributed nonuniformly as the result of anatomical structure. Lignin is derived from the Latin term lignum, which means wood.1 Anselme Payen (1838) was the first to recognize the composite nature of wood and referred to a carbon- rich substance as the “encrusting material” which embedded cellulose in the wood. Schulze (1865) later defined this encrusting material as lignin. Lignin has been described as a random, three-dimensional network polymer comprised of variously linked phenylpropane units.2 Lignin is the second most abundant biological material on the planet, exceeded only by cellulose and hemicellulose, and comprises 15-25% of the dry weight of woody plants. This macromolecule plays a vital role in providing mechanical support to bind plant fibers together. Lignin also decreases the permeation of water through the cell walls of the xylem, thereby playing an intricate role in the transport of water and nutrients. Finally, lignin plays an important function in a plant’s natural defense against degradation by impeding penetration of destructive enzymes through the cell wall. Although lignin is necessary to trees, it is undesirable in most chemical papermaking fibers and is removed by pulping and bleaching processes. 1.1.1 Biosynthesis Plant lignins can be broadly divided into three classes: softwood (gymnosperm), hardwood (angiosperm) and grass or annual plant (graminaceous) lignin.3 Three different phenylpropane units, or monolignols, are responsible for lignin biosynthesis.4 Guaiacyl lignin is composed principally of coniferyl alcohol units, while guaiacyl-syringyl lignin contains monomeric units from coniferyl and sinapyl alcohol.
    [Show full text]
  • ( 12 ) United States Patent
    US009902815B2 (12 ) United States Patent ( 10 ) Patent No. : US 9 ,902 , 815 B2 Tamminen et al. ( 45 ) Date of Patent: Feb . 27 , 2018 ( 54 ) FUNCTIONALIZED LIGNIN AND METHOD ( 58 ) Field of Classification Search OF PRODUCING THE SAME ??? . .. C07G 1 / 00 See application file for complete search history . @(71 ) Applicant : Teknologian tutkimuskeskus VTT , VTT (FI ) ( 56 ) References Cited U . S . PATENT DOCUMENTS @(72 ) Inventors : Tarja Tamminen , Espoo (FI ) ; Jarmo Ropponen , Espoo (FI ) ; Eva - Lena Hult , 2 ,429 , 102 A 10 / 1947 Lewis et al. Espoo ( FI) ; Kristiina Poppius- Levlin , 3 , 149 , 085 A 9 / 1964 Ball et al . Espoo (FI ) 4 ,017 ,430 A * 4 / 1977 Briggs .. .. .. 530 / 502 5 ,773 , 590 A * 6 / 1998 Hart 530 / 500 6 ,172 ,204 B1 * 1 /2001 Sarkanen et al. 530 /500 @(73 ) Assignee : Teknologian tutkimuskeskus VTT Oy, 2010 /0105798 A1 * 4 /2010 Hasegawa . .. .. 522 / 99 Espoo (FI ) 2010 /0152428 A1* 6 / 2010 Gifford et al . .. .. .. 530 / 504 2010 / 0204368 A1 * 8 / 2010 Benko et al. .. .. .. .. .. .. .. 524 / 73 ( * ) Notice : Subject to any disclaimer, the term of this 2010 / 0331531 A1 * 12 / 2010 Mykytka .. .. 530 / 501 patent is extended or adjusted under 35 2011/ 0263836 A1 * 10 / 2011 Vuorenpalo et al. .. .. 530 / 500 U . S . C . 154 ( b ) by 33 days. 2012 /0012035 A1 * 1 / 2012 Blank et al. .. .. 106 / 802 ( 21) Appl. No. : 14 /348 , 904 OTHER PUBLICATIONS (22 ) PCT Filed : Oct. 8 , 2012 Holmbom ( Journal of the American Oil Chemists Society , 1977 , p . 289 - 293 ) . * Stenberg et al . (Surface Coatings International Part B : Coatings ( 86 ) PCT No. : PCT/ FI2012 /050965 Transactions , vol. 88 , B2 , 83 - 156 , 2005 ) .
    [Show full text]
  • The Use of Old Corrugated Board in the Manufacture of High Quality White Papers
    Western Michigan University ScholarWorks at WMU Paper Engineering Senior Theses Chemical and Paper Engineering 12-1983 The Use of Old Corrugated Board in the Manufacture of High Quality White Papers Rene H. Kapik Western Michigan University Follow this and additional works at: https://scholarworks.wmich.edu/engineer-senior-theses Part of the Wood Science and Pulp, Paper Technology Commons Recommended Citation Kapik, Rene H., "The Use of Old Corrugated Board in the Manufacture of High Quality White Papers" (1983). Paper Engineering Senior Theses. 209. https://scholarworks.wmich.edu/engineer-senior-theses/209 This Dissertation/Thesis is brought to you for free and open access by the Chemical and Paper Engineering at ScholarWorks at WMU. It has been accepted for inclusion in Paper Engineering Senior Theses by an authorized administrator of ScholarWorks at WMU. For more information, please contact wmu- [email protected]. THE USE OF OLD CORRUGATED BOARD IN THE MANUFACTURE OF HIGH QUALITY WHITE PAPERS by Rene' H. Kapik A Thesis submitted in partial fulfillment of the course requirements for The Bachelor of Science Degree Western Michigan University Kalamazoo, Michigan December, 1983 ABSTRACT Clean corrugated board waste was fractionated into its softwood/ hardwood fiber components, repulped using a kraft pulping process, and bleached using a CEHD bleaching sequence in an effort to produce high brightness fiber suitable for use in medium to high quality white paper. The papers produced had almost equivalent mechanical strengths and opacity, but possessed unsatisfactory brightness and cleanliness when compared to commercially manufactured,:. bleached kraft pulps of identical softwood/hardwood contents. Based on this experimental data, the use of recycled fiber from corrugated board as a fiber substitute in the manufacture of high quality printing and writing papers is not recommended due to its inferior brightness and cleanliness.
    [Show full text]
  • Paper Recycling Technology Detailed Part 1A
    Paper Recycling Technology and Science Dr. Richard A. Venditti Paper Science and Engineering Forest Biomaterials Department North Carolina State University Lecture: Paper recycling and technology course introduction and objectives Dr. Richard Venditti Faculty member in the Paper Science and Engineering Program in the Forest Biomaterials Department at North Carolina State University PhD in Chemical Engineering, BS in Pulp and Paper Science and Chemical Engineering Research areas: � Paper recycling � Utilization of forest/agricultural materials for new applications � Life cycle analysis Named a TAPPI Fellow in 2012 Relevant research projects: – The detection of adhesive contaminants – The changes in fibers upon recycling – Automatic sorting of recovered papers – Flotation deinking surfactants – Agglomeration deinking – Screening phenomena and pressure sensitive adhesives – Deposition of adhesive contaminants – Neural networks to control deinking operations – Sludge conversion to bio-ethanol and to bio- materials Course Outline The US Paper Recycling Industry Recovered Paper Grades and Contaminants Effect of Recycling on Fibers/Paper Unit Operations � Pulping, Cleaning, Screening, Washing, Flotation, Dispersion, Bleaching, ….. Image Analysis, Deinking Chemicals System Design Advanced/Additional Topics Course Activities Viewing of the Videos of Lectures � Base lectures by Venditti � Guest lectures from industry leaders Homework assignments Final Exam Critical Issues in Recycling: Going deeper into the recovered paper stream
    [Show full text]
  • A Review of Wood Biomass-Based Fatty Acidsand Rosin Acids Use In
    polymers Review A Review of Wood Biomass-Based Fatty Acids and Rosin Acids Use in Polymeric Materials Laima Vevere *, Anda Fridrihsone , Mikelis Kirpluks and Ugis Cabulis Polymer Department, Latvian State Institute of Wood Chemistry, 27 Dzerbenes Str., LV-1006 Riga, Latvia; [email protected] (A.F.); [email protected] (M.K.); [email protected] (U.C.) * Correspondence: [email protected]; Tel.: +371-28869638 Received: 26 October 2020; Accepted: 14 November 2020; Published: 16 November 2020 Abstract: In recent decades, vegetable oils as a potential replacement for petrochemical materials have been extensively studied. Tall oil (crude tall oil, distilled tall oil, tall oil fatty acids, and rosin acids) is a good source to be turned into polymeric materials. Unlike vegetable oils, tall oil is considered as lignocellulosic plant biomass waste and is considered to be the second-generation raw material, thus it is not competing with the food and feed chain. The main purpose of this review article is to identify in what kind of polymeric materials wood biomass-based fatty acids and rosin acids have been applied and their impact on the properties. Keywords: crude tall oil; tall oil; fatty acids; rosin acids; polymer materials 1. Introduction The success of plastics as a commodity has been significant and polymer materials are a part of everyday life. The advantages of polymers over other materials can be attributed to their adjustable properties, low cost and ease of processing. Worldwide, the manufacturing of polymers grows every year, reaching almost 360 million tonnes in 2018 [1]. In the light of environmental challenges of the 21st century, the development of novel low-cost and scalable monomers from renewable resources is essential.
    [Show full text]
  • Tall Oil Production and Processing
    TALL OIL PRODUCTION AND PROCESSING Tall oil is a mixture of mainly acidic compounds found, like turpentine, in pine trees and obtained as a by-product of the pulp and paper industry. It is used as a resin in many different industries, including mining, paper manufacture, paint manufacture and synthetic rubber manufacture. It is extracted at the pulp and paper mill, and undergoes the first two processing steps there. Step 1 - Extraction of tall oil soap The "black liquor" from the paper making process is concentrated and left to settle. The top layer is known as "tall oil soap", and is skimmed off. The rest is recycled for further use in paper making. Step2 - Production of crude tall oil The tall oil soap is reacted with acid to form crude tall oil. The following reaction occurs: + + R—COONa + H3O → R—COOH + H2O + Na The acids formed from this reaction, along with small quantities of other compounds of similar volatility, make up the crude tall oil. All crude tall oil produced in New Zealand is then sent to a plant in Mt. Maunganui to complete processing. Step 3 - Crude tall oil distillation The oil is distilled into five components with different boiling points: heads (which boils first), then fatty acids, distilled tall oil (a mixture of fatty and resin acids), resin acids (collectively known as rosin) and pitch (the residue). All of these can be used in various industries as is, but some of the rosin is also further processed on site. Step 4 - Production of rosin paper size "Paper size" is the substance that stops all paper from behaving like blotting paper.
    [Show full text]
  • F1y3x CHAPTER 48 PAPER and PAPERBOARD
    )&f1y3X CHAPTER 48 PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD X 48-l Notes 1. This chapter does not cover: (a) Articles of chapter 30; (b) Stamping foils of heading 3212; (c) Perfumed papers or papers impregnated or coated with cosmetics (chapter 33); (d) Paper or cellulose wadding impregnated, coated or covered with soap or detergent (heading 3401), or with polishes, creams or similar preparations (heading 3405); (e) Sensitized paper or paperboard of headings 370l to 3704; (f) Paper impregnated with diagnostic or laboratory reagents (heading 3822); (g) Paper-reinforced stratified sheeting of plastics, or one layer of paper or paperboard coated or covered with a layer of plastics, the latter constituting more than half the total thickness, or articles of such materials, other than wallcoverings of heading 48l4 (chapter 39); (h) Articles of heading 4202 (for example, travel goods); (ij) Articles of chapter 46 (manufactures of plaiting material); (k) Paper yarn or textile articles of paper yarn (section XI); (l) Articles of chapter 64 or chapter 65; (m) Abrasive paper or paperboard (heading 6805) or paper- or paperboard-backed mica (heading 6814) (paper and paperboard coated with mica powder are, however, to be classified in this chapter); (n) Metal foil backed with paper or paperboard (section XV); (o) Articles of heading 9209; or (p) Articles of chapter 95 (for example, toys, games, sports equipment) or chapter 96 (for example, buttons). 2. Subject to the provisions of note 6, headings 480l to 4805 include paper and paperboard which have been subjected to calendering, super-calendering, glazing or similar finishing, false water-marking or surface sizing, and also paper, paperboard, cellulose wadding and webs of cellulose fibers, colored or marbled throughout the mass by any method.
    [Show full text]
  • What's a Tree Done for You Lately?
    What’s a Tree Done For You Lately? Some common products we get from trees and how they are made Scott Leavengood Director, Oregon Wood Innovation Center, Oregon State University This publication is on-line at http://owic.oregons tate.edu/teachers.php Introduction Products from trees are all around us. Some items are easy to recognize as products we get from trees - This publication will serve as valuable lumber, plywood, and paper, for example. Other background material for several activities in the items such as cellophane, a rayon scarf, and a Project Learning Tree (PLT) Pre K-8 chocolate bar, may not be as easy to recognize as a Environmental Education Activity Guide (1993, product from trees. American Forest Foundation, Washington, D.C.). In particular, the publication is well- This publication will help educators teach students suited to activities 12 and 13, Tree Treasures, about the variety of products we obtain from trees and We All Need Trees, respectively. and how the products are made. It serves as a reference for anyone who wants to know more Number 12 - Tree Treasures about products we obtain from trees. Objectives: 1) identify and categorize products derived from Products from trees may be categorized as: trees, 2) find out which forest products are recyclable • products from wood fiber - for example, paper or reusable, and products and purified cellulose products (rayon, 3) recommend actions for conserving forest cellophane, food additives, and resources. pharmaceuticals); Number 13 - We All Need Trees • products derived
    [Show full text]
  • Tall Oil Soap Recovery TAPPI Kraft Recovery Short Course
    Tall Oil Soap Recovery TAPPI Kraft Recovery Short Course C.D. Foran, Arizona Chemical Co., Savannah GA Slide 1 Tall oil soap is a mixture of the sodium salts of rosin acids, fatty acids and neutrals that separates from kraft black liquor. Composition of Crude Tall Oil Northern New Southern USA & Zealand & USA Canada Scandinavia Chile Acid Number 165 135 132 158 Resin Acids % 41 30 23 43 Fatty Acids % 51 55 57 40 Neutrals % 8 15 20 14 1 Slide 2 How Much Tall Oil Can Be Recovered ? Soap Recovery Tall Oil Tall Oil 52 26 51 25.5 kg/1000 kg lb/ ODT Region 50 25 OD Wood Wood 49 24.5 Piedmont 24 48 48 24 47 23.5 kg CTO/ODt Pine Wood Pine CTO/ODt kg Coastal 26 52 Lb. CTO/ODT Pine Wood46 23 45 22.5 Canada 11.5 23 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Average Southwestern 31.5 63 Impact of Storage Time on West of 7.5 15 Tall Oil Loss 100% Cascades 80% 60% NZ & Chile 12 24 40% Tall Oil Loss Tall Finland 18.5 37 20% 0% 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Sweden 25 50 Storage Time (weeks) Outside Chips Roundwood Chips Slide 3 Why Should Tall Oil Soap Be Recovered ? •To improve pulp and paper mill operations •To reduce the toxicity of pulp mill effluents, •To reduce accidents due to slips and falls. •To increase mill revenue 2 Slide 4 Tall Oil Soap Should Be Recovered To Improve Pulp and Paper Mill Operations : Impact of Improved Soap Removal on Evaporator Overall Heat Transfer 1.
    [Show full text]
  • SUSTAINABILITY REPORT 2020 We Create Green Value Contents
    SUSTAINABILITY REPORT 2020 We create green value Contents SUMMARY Key figures 6 Norske Skog - The big picture 7 CEO’s comments 8 Short stories 10 SUSTAINABILITY REPORT About Norske Skog’s operations 14 Stakeholder and materiality analysis 15 The sustainable development goals are an integral part of our strategy 16 Compliance 17 About the sustainability report 17 Sustainability Development Goals overview 20 Prioritised SDGs 22 Our response to the TCFD recommendations 34 How Norske Skog relates to the other SDGs 37 Key figures 50 GRI standards index 52 Independent Auditor’s assurance report 54 Design: BK.no / Print: BK.no Paper: Artic Volum white Editor: Carsten Dybevig Cover photo: Carsten Dybevig. All images are Norske Skog’s property and should not be used for other purposes without the consent of the communication department of Norske Skog Photo: Carsten Dybevig SUMMARY BACK TO CONTENTS > BACK TO CONTENTS > SUMMARY Key figures NOK MILLION (UNLESS OTHERWISE STATED) 2015 2016 2017 2018 2019 2020 mills in 5 countries INCOME STATEMENT 7 Total operating income 11 132 11 852 11 527 12 642 12 954 9 612 Skogn, Norway / Saugbrugs, Norway / Golbey, France / EBITDA* 818 1 081 701 1 032 1 938 736 Bruck, Austria / Boyer, Australia / Tasman, New Zealand / Operating earnings 19 -947 -1 702 926 2 398 -1 339 Nature’s Flame, New Zealand Profit/loss for the period -1 318 -972 -3 551 1 525 2 044 -1 884 Earnings per share (NOK)** -15.98 -11.78 -43.04 18.48 24.77 -22.84 CASH FLOW Net cash flow from operating activities 146 514 404 881 602 549 Net cash flow
    [Show full text]