DOCSLIB.ORG

Common Name: TITANIUM TETRACHLORIDE HAZARD

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Common Name: TITANIUM TETRACHLORIDE HAZARD Common Name: TITANIUM TETRACHLORIDE CAS Number: 7550-45-0 RTK Substance number: 1864 DOT Number: UN 1838 Date: February 2000 ----------------------------------------------------------------------- ----------------------------------------------------------------------- HAZARD SUMMARY * Titanium Tetrachloride can affect you when breathed in. * If you think you are experiencing any work-related health * Titanium Tetrachloride is a CORROSIVE CHEMICAL problems, see a doctor trained to recognize occupational and contact can severely irritate and burn the skin and eyes diseases. Take this Fact Sheet with you. with possible eye damage. * Breathing Titanium Tetrachloride can irritate the nose WORKPLACE EXPOSURE LIMITS and throat. No occupational exposure limits have been established for * Breathing Titanium Tetrachloride can irritate the lungs Titanium Tetrachloride. This does not mean that this causing coughing and/or shortness of breath. Higher substance is not harmful. Safe work practices should always exposures can cause a build-up of fluid in the lungs be followed. (pulmonary edema), a medical emergency, with severe shortness of breath. WAYS OF REDUCING EXPOSURE * Titanium Tetrachloride is a REACTIVE CHEMICAL * Where possible, enclose operations and use local exhaust and an EXPLOSION HAZARD. ventilation at the site of chemical release. If local exhaust ventilation or enclosure is not used, respirators should be IDENTIFICATION worn. Titanium Tetrachloride is a colorless to pale yellow liquid. * Wear protective work clothing. It is used to make Titanium metal and other Titanium * Wash thoroughly immediately after exposure to Titanium containing compounds. Tetrachloride. * Post hazard and warning information in the work area. In REASON FOR CITATION addition, as part of an ongoing education and training * Titanium Tetrachloride is on the Hazardous Substance effort, communicate all information on the health and List because it is cited by DOT, DEP, NFPA and EPA. safety hazards of Titanium Tetrachloride to potentially * This chemical is on the Special Health Hazard Substance exposed workers. List because it is CORROSIVE and REACTIVE. * Definitions are provided on page 5. HOW TO DETERMINE IF YOU ARE BEING EXPOSED The New Jersey Right to Know Act requires most employers to label chemicals in the workplace and requires public employers to provide their employees with information and training concerning chemical hazards and controls. The federal OSHA Hazard Communication Standard, 1910.1200, requires private employers to provide similar training and information to their employees. * Exposure to hazardous substances should be routinely evaluated. This may include collecting personal and area air samples. You can obtain copies of sampling results from your employer. You have a legal right to this information under OSHA 1910.1020. TITANIUM TETRACHLORIDE page 2 of 6 This Fact Sheet is a summary source of information of all Request copies of your medical testing. You have a legal potential and most severe health hazards that may result from right to this information under OSHA 1910.1020. exposure. Duration of exposure, concentration of the substance and other factors will affect your susceptibility to Mixed Exposures any of the potential effects described below. * Because smoking can cause heart disease, as well as lung --------------------------------------------------------------------------- cancer, emphysema, and other respiratory problems, it may worsen respiratory conditions caused by chemical HEALTH HAZARD INFORMATION exposure. Even if you have smoked for a long time, stopping now will reduce your risk of developing health Acute Health Effects problems. The following acute (short-term) health effects may occur immediately or shortly after exposure to Titanium WORKPLACE CONTROLS AND PRACTICES Tetrachloride: Unless a less toxic chemical can be substituted for a hazardous * Contact can severely irritate and burn the skin and eyes substance, ENGINEERING CONTROLS are the most with possible eye damage. effective way of reducing exposure. The best protection is to * Breathing Titanium Tetrachloride can irritate the nose enclose operations and/or provide local exhaust ventilation at and throat. the site of chemical release. Isolating operations can also * Breathing Titanium Tetrachloride can irritate the lungs reduce exposure. Using respirators or protective equipment is causing coughing and/or shortness of breath. Higher less effective than the controls mentioned above, but is exposures can cause a build-up of fluid in the lungs sometimes necessary. (pulmonary edema), a medical emergency, with severe shortness of breath. In evaluating the controls present in your workplace, consider: (1) how hazardous the substance is, (2) how much of the Chronic Health Effects substance is released into the workplace and (3) whether The following chronic (long-term) health effects can occur at harmful skin or eye contact could occur. Special controls some time after exposure to Titanium Tetrachloride and can should be in place for highly toxic chemicals or when last for months or years: significant skin, eye, or breathing exposures are possible. Cancer Hazard In addition, the following controls are recommended: * There is no evidence that Titanium Tetrachloride causes cancer in animals. This is based on test results presently * Where possible, automatically pump liquid Titanium available to the New Jersey Department of Health and Tetrachloride from drums or other storage containers to Senior Services from published studies. process containers. * Before entering a confined space where Titanium Reproductive Hazard Tetrachloride may be present, check to make sure that an * According to the information presently available to the explosive concentration does not exist. New Jersey Department of Health and Senior Services, Titanium Tetrachloride has not been tested for its ability Good WORK PRACTICES can help to reduce hazardous to affect reproduction. exposures. The following work practices are recommended: Other Long-Term Effects * Workers whose clothing has been contaminated by * Titanium Tetrachloride can irritate the lungs. Repeated Titanium Tetrachloride should change into clean exposure may cause bronchitis to develop with cough, clothing promptly. phlegm, and/or shortness of breath. * Contaminated work clothes should be laundered by individuals who have been informed of the hazards of MEDICAL exposure to Titanium Tetrachloride. * Eye wash fountains should be provided in the immediate Medical Testing work area for emergency use. * If there is the possibility of skin exposure, emergency If symptoms develop or overexposure is suspected, the shower facilities should be provided. following is recommended: * On skin contact with Titanium Tetrachloride, immediately wash or shower to remove the chemical. * Consider chest x-ray after acute overexposure. * Do not eat, smoke, or drink where Titanium Tetrachloride is handled, processed, or stored, since the Any evaluation should include a careful history of past and chemical can be swallowed. Wash hands carefully before present symptoms with an exam. Medical tests that look for eating, drinking, smoking, or using the toilet. damage already done are not a substitute for controlling exposure. TITANIUM TETRACHLORIDE page 3 of 6 PERSONAL PROTECTIVE EQUIPMENT * Titanium Tetrachloride is not compatible with OXIDIZING AGENTS (such as PERCHLORATES, WORKPLACE CONTROLS ARE BETTER THAN PEROXIDES, PERMANGANATES, CHLORATES, PERSONAL PROTECTIVE EQUIPMENT. However, for NITRATES, CHLORINE, BROMINE and FLUORINE); some jobs (such as outside work, confined space entry, jobs STRONG BASES (such as SODIUM HYDROXIDE and done only once in a while, or jobs done while workplace POTASSIUM HYDROXIDE); ALCOHOLS; and controls are being installed), personal protective equipment METALS. may be appropriate. * Store in tightly closed containers in a cool, dry, well- ventilated area. OSHA 1910.132 requires employers to determine the * Wherever Titanium Tetrachloride is used, handled, appropriate personal protective equipment for each hazard and manufactured, or stored, use explosion-proof electrical to train employees on how and when to use protective equipment and fittings. equipment. QUESTIONS AND ANSWERS The following recommendations are only guidelines and may not apply to every situation. Q: If I have acute health effects, will I later get chronic health effects? Clothing A: Not always. Most chronic (long-term) effects result * Avoid skin contact with Titanium Tetrachloride. Wear from repeated exposures to a chemical. protective gloves and clothing. Safety equipment suppliers/ Q: Can I get long-term effects without ever having short- manufacturers can provide recommendations on the most term effects? protective glove/clothing material for your operation. A: Yes, because long-term effects can occur from repeated * All protective clothing (suits, gloves, footwear, headgear) exposures to a chemical at levels not high enough to should be clean, available each day, and put on before make you immediately sick. work. Q: What are my chances of getting sick when I have been Eye Protection exposed to chemicals? * Wear indirect-vent, impact and splash resistant goggles A: The likelihood of becoming sick from chemicals is when working with liquids. increased as the amount of exposure increases. This is * Wear a face shield along with goggles when working with determined by the length of time and the amount of corrosive, highly irritating or toxic substances.
Load more

Recommended publications
  • MSDS for Retrotec Air Current Tester
    Material Safety Data Sheet For use with Retrotec’s Air Current Tester Emergency Phone Number (24 hours) CHEMTREC (800-424-9300) Protective Equipment: Wear self-contained breathing apparatus and full protective suit. Outside US: 703-527-3887 SECTION 1 SECTION 6 CHEMICAL IDENTIFICATION OF THE SUBSTANCE/PREPARATION ACCIDENTAL RELEASE MEASURES PRODUCT NAME: Titanium Tetrachloride Do not contact with water. Ventilate area. Wear protective equipment. Do not allow to enter COMMON NAME OR SYNONYMS: Titanium Chloride, Titanium (IV) Chloride drainage systems or water ways. Neutralize with soda ash, limestone etc. Wipe up and put into SPEX CATALOG NUMBER: VIL004 a sealed container for proper disposal. Wash spill site with water after material pick up is complete. Wear chemical resistant glasses, gloves and clothing. Manufacturer/Supplier SPEX CERTIPREP SECTION 7 203 Norcross Avenue HANDLING & STORAGE Metuchen, NJ 08840 Ensure good ventilation/exhaustion at work place. Have an immediate availability of an eye SPEX CERTIPREP LTD wash in case of emergency. Store at room temperature. Keep the container tightly closed. 2 Dalston Gardens Stanmore, Middlesex HA7 1BQ SECTION 8 England EXPOSURE CONTROLS/PERSONAL PROTECTION Tel: (0) 20 8204 6656 Wear goggles, protective apron and acid resistant gloves. Use under fume hood. In case of brief SECTION 2 exposure, use MSHA/NIOSH approved respirator. COMPOSITION/INFORMATION ON INGREDIENTS HAZERDOUS % TLV UNITS CAS # EINECS VOLUME SECTION 9 MATERIAL 3 PHYSICAL & CHEMICAL PROPERTIES TiCl4 ~100 0.5 mg/m [7550-45-0] 10ml Form: Liquid Appearance & odor: Transparent with acrid odor SECTION 3 % volatiles by vol. @ 21C: 100 HAZARD IDENTIFICATION Solubility: Reacts violently with water pH: No information found Corrosive.
    [Show full text]
  • Working with Hazardous Chemicals
    A Publication of Reliable Methods for the Preparation of Organic Compounds Working with Hazardous Chemicals The procedures in Organic Syntheses are intended for use only by persons with proper training in experimental organic chemistry. All hazardous materials should be handled using the standard procedures for work with chemicals described in references such as "Prudent Practices in the Laboratory" (The National Academies Press, Washington, D.C., 2011; the full text can be accessed free of charge at http://www.nap.edu/catalog.php?record_id=12654). All chemical waste should be disposed of in accordance with local regulations. For general guidelines for the management of chemical waste, see Chapter 8 of Prudent Practices. In some articles in Organic Syntheses, chemical-specific hazards are highlighted in red “Caution Notes” within a procedure. It is important to recognize that the absence of a caution note does not imply that no significant hazards are associated with the chemicals involved in that procedure. Prior to performing a reaction, a thorough risk assessment should be carried out that includes a review of the potential hazards associated with each chemical and experimental operation on the scale that is planned for the procedure. Guidelines for carrying out a risk assessment and for analyzing the hazards associated with chemicals can be found in Chapter 4 of Prudent Practices. The procedures described in Organic Syntheses are provided as published and are conducted at one's own risk. Organic Syntheses, Inc., its Editors, and its Board of Directors do not warrant or guarantee the safety of individuals using these procedures and hereby disclaim any liability for any injuries or damages claimed to have resulted from or related in any way to the procedures herein.
    [Show full text]
  • Heat of Formation of Titanium Tetrachloride Waiter H
    Journal of Research of the National Bureau of Standards Vol. 62, No. 1, January 1959 Research Paper 2928 Heat of Formation of Titanium Tetrachloride WaIter H. Johnson, Raymond A. Nelson, and Edward 1. Prosen The heat of formation of gaseous titanium tetrachloride has been measured by the reaction of metallic titanium with gaseous chlorine in a calorimeter. The value for the heat of formation obtained in t his investigation corresponds to the reaction: Ti(c) + 2Clz( g) = TiCI4(g), ilHf °(25° C) =-763.2 ± 2.9 kj/ mole (- 182.4 ± O.7 kcal(mole) . Earlier data are discussed briefly. 1. Introduction The following results were obtained in volume per­ cent: H 2, 0.00; CO, 0.00; (N2 + 0 2 + A), 0.01. The This investigation is part of a program on the purity of a second sample was determined to be determination of the tJlermodynamic properties of 99.99 mole percent from cryoscopic measure~ncnts titanium compounds sponsored by the Office of by Gaylon S. Ross of the Pure Substances SectIOn of Naval Research; it is also a part of the work of the the Chemistry Division. thermochemical laboratory of the Bureau on the A sample of the helium, taken directly from the determination of the heats of formation of compounds cylinder, was found to contain less Lhan 0.01 percent of importance to science and industry .. of oxygen and nitrogen from an anal)'sis by Vemon The heat of formation of TiC14 may be obtained H. Dibclcr of the Mass Spectrometry Section of the by several different methods, each having certain Atomic and Radiation Physics Divisi on.
    [Show full text]
  • Safety Data Sheet Material Name: TICL4 SDS ID: ADC23550
    Safety Data Sheet Material Name: TICL4 SDS ID: ADC23550 Section 1 - PRODUCT AND COMPANY IDENTIFICATION Material Name TICL4 Synonyms TITANIUM TETRACHLORIDE; TITANIUM CHLORIDE; TITANIC CHLORIDE; TETRACHLOROTITANIUM; TITANIUM CHLORIDE (TiCl4) (T-4)-; TITANIUM(IV) CHLORIDE; T-308; SMOKE STICKS #15-049; UN 1838; Cl4Ti Chemical Family inorganic, halogenated Product Use semiconductor manufacture Restrictions on Use None known. Details of the supplier of the safety data sheet Entegris, Inc. 129 Concord Road Building 2 Billerica, MA 01821 USA Telephone Number: +1-952-556-4181 Telephone Number: +1-800-394-4083 (toll free within North America) Emergency Telephone Number: CHEMTREC - U.S. - 1-800-424-9300 CHEMTREC - Intl. - 1-703-527-3887 E-mail: [email protected] Section 2 - HAZARDS IDENTIFICATION Classification in accordance with paragraph (d) of 29 CFR 1910.1200. Acute Toxicity - Oral - Category 4 Acute Toxicity - Inhalation - Vapor - Category 1 Skin Corrosion/Irritation - Category 1 Serious Eye Damage/Eye Irritation - Category 1 Specific target organ toxicity - Single exposure - Category 3 ( respiratory system ) GHS Label Elements Symbol(s) Signal Word Danger Hazard Statement(s) ____________________________________________________________ Page 1 of 10 Issue date: 2018-12-03 Revision 3.2 Print date: 2018-12-03 Safety Data Sheet Material Name: TICL4 SDS ID: ADC23550 Fatal if inhaled. Harmful if swallowed. Causes severe skin burns and eye damage. May cause respiratory irritation. Precautionary Statement(s) Prevention Do not breathe vapor or mist. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Do not eat, drink or smoke when using this product. Wear respiratory protection. Wear protective gloves/protective clothing/eye protection/face protection.
    [Show full text]
  • (III). the Reactions of Titanium Tetrachloride with Piperidine and Diphenylamine
    DAEHAN HWAH스 K HWOEjEE (Journal of the Korean Chemical Society) Vol. 18, No. 6, 1974 Printed in Republic of Korea ' 유기티탄 화학 (제 3 보 ). 사염화티탄과 피페러딘 및 디페닐아민과 의 반응 魚勇善* •李厚成•孫蓮秀 한국과학기 술연 구소 (1974. 3. 28 접수 ) Organotitanium Chemistry (III). The Reactions of Titanium Tetrachloride with Piperidine and Diphenylamine Young Sun Uh, Hoosung Lee and Youn Soo Sohn* Korea Institute of Science and Technology, Seoul, Korea (Received March 28, 1974) 요 약 . 사염화티 탄과 피페리딘 및 디페닐아민의 반응을 반응생성물들을 분리하여 규명함으로써 설명 하였 다 . 사염 화티 탄과 피페 리딘은 부가반응과 치 환반응이 다음과 같이 동시 에 일어 남을 알 수 있었다 . TiCL + C5H10NH 一 > TiC14-C5H10NH TiCU + C5H10 —> TiCl3-NC5H10+HCl 부가반응은 비교적 빨리 일어나며 수분내에 반응이 완결되는데 비하여 치환반응은 매우 느리게 일 어난다 . 위의 두 반응생성물을 모두 분리하여 화학분석결과와 핵자기공명 및 적외선 스펙트럼을 고 찰 함으로써 완전히 규명하였다 . 이들 반응생성물에는 모두 피페리딘의 염화수소염이 공침됨을 알 수 있었다 . 그러나 디페닐아민의 경우 , 위의 반응과 아주 비슷하게 일어나지만 부가반응 생성물은 순수 하게 얻을 수 있었다 . Abstract. The direct reactions of titanium tetrachloride with piperidine and diphenylamine in dichloromethane have been studied by examining the isolated reaction products. In the reaction with piperidine, titanium tetrachloride undergoes both addition and substitution reactions as in the following: TiCl4 丄 C5H10NH —> TiCl4-C5H10NH TiCl4 - C5H10NH —> TiCl3-NC5H10+HCl The addition reaction is relatively fast and completed in minutes whereas the substitution reaction is very slow. The both reaction products coprecipitated with piperidine hydrochloride formed during the substitution reaction were isolated and characterized. The reaction with diphenylamine resembles to the above reaction but the addition compound could be obtained in pure crystal form.
    [Show full text]
  • A Comparative Study on the Chloride Effectiveness of Synthetic Rutile and Natural Rutile Manufactured from Ilmenite
    www.nature.com/scientificreports OPEN A comparative study on the chloride efectiveness of synthetic rutile and natural rutile manufactured from ilmenite ore Eun Jin Jung1*, Jinyoung Kim1 & Ye Rin Lee2 Studies on continuous and selective chlorination by using ilmenite have been actively conducted because the efcient removal of FeO from ilmenite(FeTiO3) ore using selective chlorination not only improves the reaction purity of TiCl4 but it also leads to price competitiveness compared to TiCl4 synthesized from natural rutile. The chlorination of synthetic rutile with FeO removed was compared with that of natural rutile to examine the reaction efciency. The selective chlorination efciency depends on the input amounts of coke and Cl2, as shown by thermodynamic calculation, when FeO is selectively removed. It was found that manufacturing of TiCl4 was easier by using the synthetic rutile, because it had greater porosity than natural rutile. Relatively greater pore volumes were found in the synthetic rutile than in natural rutile. It was confrmed that the reaction efciency of chlorination for TiCl4 production was directly related to the diference in the porosity distribution between the titanium ores, as verifed by a kinetic comparison of synthetic and natural rutiles. Ilmenite(FeTiO3) ore is a raw material for producing TiCl4 through the chlorination method and the sulfuric acid reaction method. TiCl 4 is used as a raw material for producing metallic titanium through the Kroll process 1–5 or for producing TiO2 used as a catalyst or pigment . Until now, high-grade rutile ore has been used for manu- facturing TiCl4. Te advantages of having low prices and extensive reserves have led to active research using the ilmenite ore.
    [Show full text]
  • INTI065.5 TITANIUM TETRACHLORIDE 1M in Toluene
    Gelest, Inc. GELEST, INC. 11 East Steel Rd. Morrisville, PA 19067 Phone: (215) 547-1015 MATERIAL SAFETY EMERGENCY TELEPHONE DATA SHEET CHEMTREC: 1-800-424-9300 NAME USED ON LABEL: TITANIUM TETRACHLORIDE 1M in toluene - INTI065.5 CHEMICAL NAME: TITANIUM TETRACHLORIDE 1M in toluene SYNONYMS: TITANIUM IV CHLORIDE, toluene solution CHEMICAL FAMILY: TITANIUM COMPOUND FORMULA: Cl4Ti HMIS CODES HEALTH: 3 FLAMMABILITY: 3 REACTIVITY: 2 INGREDIENTS IDENTITY CAS NO. % TLV OSHA PEL TOLUENE 108-88-3 79-82 TWA- 100ppm TWA- 200ppm TITANIUM TETRACHLORIDE 755045-0 18-21 not established not established (OSHA PEL for hydrogen chloride, TWA: 5ppm) PHYSICAL DATA Boiling Point: 136.4°C Freezing Point: -24°C Specific Gravity: 0.965 Vapor Pressure,20°: 1.27 kPa Vapor Density (air = 1): 1.07 Solubility in water: reacts violently % volatiles: 100% Evaporation rate: not determined Molecular Weight: 189.71 Other: NA Appearance & Color: Clear to straw liquid with acrid odor of hydrogen chloride, forms dense white fumes on contact with air. FIRE & EXPLOSION DATA Flash Point, COC: 8°C(46°F) Autoignition Temp.: 535°C (toluene) Flammability Limits-(toluene) LEL: 1.27% UEL: 7% Extinguishing Media: Alcohol resistant foam, carbon dioxide, dry chemical. Use of high expansion foam (100:1) is recommended to cover flames. Special Fire Fighting Procedures: Use only dry media to extinguish flames. Water spray or fog should only be used to knock down fumes in areas downwind from the fire. Avoid eye and skin contact. Do not breathe fumes or inhale vapors. Unusual Fire and Explosion Hazards: Irritating dense white fumes of titanium dioxide and hydrogen chloride develop when material is exposed to water or open flame.
    [Show full text]
  • High Aspect Ratio Tio2 Nanowires Tailored in Concentrated Hcl Hydrothermal Condition for Photoelectrochemical Water Splitting
    RSC Advances This is an Accepted Manuscript, which has been through the Royal Society of Chemistry peer review process and has been accepted for publication. Accepted Manuscripts are published online shortly after acceptance, before technical editing, formatting and proof reading. Using this free service, authors can make their results available to the community, in citable form, before we publish the edited article. This Accepted Manuscript will be replaced by the edited, formatted and paginated article as soon as this is available. You can find more information about Accepted Manuscripts in the Information for Authors. Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content. The journal’s standard Terms & Conditions and the Ethical guidelines still apply. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains. www.rsc.org/advances Page 1 of Journal7 Name RSC Advances Dynamic Article Links ► Cite this: DOI: 10.1039/c0xx00000x www.rsc.org/xxxxxx ARTICLE TYPE High aspect ratio TiO2 nanowires tailored in concentrated HCl hydrothermal condition for photoelectrochemical water splitting Jinzhan Su*, Liejin Guo Received (in XXX, XXX) Xth XXXXXXXXX 20XX, Accepted Xth XXXXXXXXX 20XX 5 DOI: 10.1039/b000000x TiO2 nanowire/nanorod array grown on FTO substrate by hydrothermal reaction have attracted great attentions because of their favorable application in DSSC and quantum dot solar cells. In this paper, discrete vertically aligned TiO2 nanowire arrays with their length as long as 7.2 µm and their diameter less than 100 nm were successfully synthesized on FTO substrate by hydrothermal method.
    [Show full text]
  • Protect Laboratory Chemicals from Use in a Terrorist Attack
    Protect Laboratory Chemicals from Use in a Terrorist Attack Overview Chemicals and reagents used for research and development, testing, monitoring, or education are critical to production, nonproduction, diagnostic, and pharmaceutical laboratory services. However, in the wrong hands, some of these same chemicals can be used for great harm. What Is CFATS? In 2006, Congress authorized the U.S. Department of Homeland Security (DHS) to establish the Chemical Facility Anti-Terrorism Standards (CFATS) program. Managed by the Cybersecurity and Infrastructure Security Agency (CISA), the CFATS program identifies and regulates high-risk chemical facilities to ensure that security measures are in place that reduce the risk of certain chemicals being weaponized. Appendix A of the CFATS regulation lists more than 300 chemicals of interest (COI) and their respective screening threshold quantity (STQ), concentration, and security issues. If released, stolen or diverted, and/or used as a contaminant, these COI have the potential to cause significant loss of human life and/or health consequences. Any individual or facility in possession of COI that meets or exceeds the STQ and concentration must report those chemicals to CISA through an online survey called a Top-Screen. COI Commonly Found in Laboratories Laboratories that use COI are considered chemical facilities under CFATS and may be subject to its regulations. Some of the commonly reported COI include, but are not limited to: • Aluminum (powder) • Sarin • Ammonium perchlorate • Sodium nitrate • DF (Methyl phosphonyl difluoride) • Soman [o-Pinacolyl • HN1, HN2, and HN3 (Nitrogen mustard-1, 2, 3) methylphosphonofluoridate] • Hydrogen fluoride (anhydrous) • Sulfur Mustard (Mustard gas (H)) • Hydrogen peroxide (conc.
    [Show full text]
  • Synthesis and Characterization of Tio2 Nanoparticles for the Reduction of Water Pollutants
    materials Article Synthesis and Characterization of TiO2 Nanoparticles for the Reduction of Water Pollutants Gigliola Lusvardi 1,*, Corrado Barani 2, Federica Giubertoni 2 and Giulia Paganelli 1 1 Department of Chemistry and Geological Sciences, University of Modena and Reggio Emilia, Via G. Campi 103, 41125 Modena, Italy; [email protected] 2 Barchemicals, Via S. Allende 14, 41051 Castelnuovo Rangone (MO), Italy; [email protected] (C.B.); [email protected] (F.G.) * Correspondence: [email protected], Tel.: +39-059-205-8549 Received: 30 August 2017; Accepted: 18 October 2017; Published: 20 October 2017 Abstract: The aim of this manuscript was the optimization of the synthesis of TiO2 nanoparticles (TiO2 NPs) with conditions that could be easily reproducible at the industrial level. Several procedures were tested and those with C12H28O4Ti and CO(NH2)2 as precursors seemed the most promising and, consequently, were improved with different molar ratios, lower temperatures and the addition of NH4Cl as a secondary dopant of nitrogen. The obtained samples were studied with analytical techniques such as X-ray powder diffraction (XRPD) and field emission scanning electron microscopy (FESEM). To complete the study, dye degradation and bacteriological tests were also performed. The results indicate that it is possible to obtain TiO2 NPs at lower temperatures with respect to those used in the literature; the best candidate that could satisfy all the requirements was a sample with a ◦ molar ratio of C12H28O4Ti:CO(NH2)2 at 2:1 and obtained at 50 C. Keywords: TiO2; nanoparticles; photocatalysis; pollutants 1. Introduction Nanotechnologies are a set of methods and techniques for the treatment of matter and aimed at obtaining materials with novel functionalities and improved characteristics.
    [Show full text]
  • The First Report of Lewis Acid Reagents in the Intramolecular Rauhut-Currier Reaction Andrew T
    Bryn Mawr College Scholarship, Research, and Creative Work at Bryn Mawr College Chemistry Faculty Research and Scholarship Chemistry 2015 The first report of Lewis acid reagents in the intramolecular Rauhut-Currier reaction Andrew T. Krasley William Paul Malachowski Bryn Mawr College, [email protected] Let us know how access to this document benefits ouy . Follow this and additional works at: http://repository.brynmawr.edu/chem_pubs Part of the Chemistry Commons Custom Citation A. T. Krasley and W. P. Malachowski, “The first report of Lewis acid reagents in the intramolecular Rauhut–Currier reaction,” Tetrahedron Letters 56.44 (2015): 6073-6076. This paper is posted at Scholarship, Research, and Creative Work at Bryn Mawr College. http://repository.brynmawr.edu/chem_pubs/19 For more information, please contact [email protected]. The first report of Lewis acid reagents in the intramolecular Rauhut-Currier reaction Andrew T. Krasley and William P. Malachowski* Chemistry Department, Bryn Mawr College, Bryn Mawr, PA 19010, USA [email protected] Abstract: The first report of Lewis acid use in intramolecular Rauhut-Currier reactions is described. Titanium Lewis acids lead to rapid Rauhut-Currier reactions in the case of two classic substrates. More importantly, titanium and tin Lewis acids were the only successful reagent for a more complex substrate, thereby illustrating the potential for Lewis acid reagents to facilitate challenging intramolecular Rauhut- Currier reactions that fail with traditional reagents. Graphical abstract: Keywords: Lewis acid, Rauhut-Currier, conjugate addition, bicarbocyclic synthesis Lewis acids are an extremely effective reagent for a variety of chemical transformations and the wealth of review articles1 describing their many applications serves to illustrate their value.
    [Show full text]
  • 53. Water Reactive Materials
    SYMPOSIUM SERIES No. 150 # 2004 IChemE WATER REACTIVE MATERIALS — INCORPORATION INTO SAFETY AND ENVIRONMENTAL RISK ASSESSMENTS Lyn Fernie, Paul Wright and Theo Kapiasà AK EHS & Risk, Aker Kvaerner Engineering Services Ltd, Ashmore House, Stockton on Tees, TS18 3RE ÃIndependent Water reactive chemicals are generally aggressive materials that are used widely in the process industries. Common water reactive substances are sulphur trioxide, oleum, titanium tetrachloride, silicon tetrachloride, chlorosulphonic acid, chloroace- tyl chloride and phosphorus trichloride. When released to the atmosphere, water reactive materials generally react readily with any free ground water, substrate water and atmospheric water. The exact nature, kinetics and thermodynamics of these reactions govern the subsequent consequences of a release. Consequence modelling and dispersion analysis of water reactive materials is notoriously difficult due to the uncertainties surrounding the reaction with water. Very little experimental data are available on the release behaviour of many water reactive materials. There are often discrepancies and gaps in the data available on the liquid phase hydrolysis reaction; these discrepancies can be as extreme as whether the reaction is exothermic or endothermic. This paper will use a case study to show how the behaviour of water reactive materials has been incorporated into safety and environmental risk assessments, in particular for the purposes of the predictive aspects of COMAH Safety Reports. KEYWORDS: COMAH, reactive, consequence, dispersion, predictive, hydrolysis. THE REQUIREMENT TO MODEL WATER REACTIVE CHEMICALS The COMAH Regulations 19991 require that operators demonstrate that they have ident- ified potential major accident hazards and taken measures to prevent them and limit their consequences. Schedule 4 Part 2 Para 4b also requires an “assessment of the extent and severity of the consequences of identified major accidents”.
    [Show full text]