Manhattan Model: Plaza HD•S2 LET’S GET STARTED YOUR USER GUIDE WELCOME TO FREESAT

We are so pleased you bought this Manhattan The Plaza HD•S2 is packed with amazing Plaza HD•S2 Freesat receiver. features. Some of the highlights are:

Now you can enjoy: • Create your own personal Programme Guide using up to 8 favourites lists (see p22) • Quality state-of-the-art satellite TV receiver • One-touch reminders (p20) • Over 180 of your favourite channels • Timer, Auto Turn On & Auto Turn Off functionality (p29) • Picture perfect High Definition (selected channels) • BBC iPlayer & ITV Player • Easy plug and play set up TECHNICAL SUPPORT FOR • Expert customer support - visit freesat.co.uk YOUR PLAZA HD•S2 or call 0345 313 0051 Phone: 020 8450 0005 Not included: Web: www.manhattan-tv.com

• Monthly subscriptions (It’s free) You can submit a support request via our website 24 hours a • Lengthy contracts (It’s free forever) day. However, if your matter is urgent then please contact us by • Baffling, complicated technology (It’s simple) phone. We are open Monday to Friday from 9am to 5:30pm.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

2 CONTENTS

In The Box 5 Advanced Use 22 Your receiver 6 Using the favourites lists 22 1 Remote control 8 4 Display mode 24 TV/DTV 24 Changing the channel list 24 Preparation 10 The lock PIN 24 The satellite dish 10 Using the setup menus 25 2 Connecting your receiver 10 General menu section 25 Switching on 11 - Subtitles 26 Tuning in 12 - Subtitle language 26 - Information 26 Picture menu section 26 15 Everyday Use - Screen type 27 Turning on the receiver 15 - Display mode 27 3 Changing channels 15 - HDMI resolution 27 Changing the volume 16 - Scart mode 27 Browsing bar 16 Subtitles and Audio Description (AD) 17 Sound menu section 28 Using the channel list 18 - Audio language 28 Searching for a channel 18 - Audio description volume 28 Regional channels 18 - Dolby digital 28 Using the programme guide 19 - Lip-sync delay 28 Interactive TV services 21 - Balance 29

continued...

3 CONTENTS

Advanced Use (continued) 29 On Demand TV 32 Time menu section 29 Setting up for on demand TV 32 4 - Auto standby 29 5 Watching on demand TV 33 - Sleep timer 29 - Auto turn on 29 - Auto turn off 29 Non-Freesat Channels 35 - Time zone 30 Tuning in non-Freesat channels 35 System menu section 30 6 Watching non-Freesat channels 36 - Freesat installation 30 - Add non-Freesat channels 30 - Network configuration 30 Appendix A Safety 38 - Parental guidance 30 Appendix B Troubleshooting 40 - Hide adult channels 30 Appendix C Specifications 42 - Lock online content 31 Notes 43 - Set lock pin 31 - Software update via OAD 31 - OAD software manual scan 31 - Software update via USB 31 - Restore factory default 31

4 File Version: v3 2nd Generation Remote Control Date: 8/5/15 Manhattan Plaza HD-T2 & HD-S2 In The Box Author: Alex Arbab-Zadeh

Color Guide In your Plaza HD•S2 Freesat receiver pack youPlaza HD-T2should Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted Pantone 1797 CP 19 0A find the following items:Pantone 354 C 2X Pantone Yellow C 17 0C 43

2nd Generation Remote Control Pantone Process Cyan C 41 13 15 Manhattan Plaza HD-T2 & HD-S2 WATCH TV 42 45 18

Change the channel you are watching by the scheduled programmes using the and Manhattan Remoenteringt ethe C odesthree-digit channel number R earbuttons La toy outmove through the channelsPlaza HD-T2 Inverted PlaPlazaza HD H •D S2-S2 Re Inmvoeter tCedontrol Model: Plaza HD•S2 using the number buttons on the remote and the and buttons to move the orange 6 For assistance, please call 1B 1F control. Or, you can press the P or P highlight bar to show the programmes Standby - switches 1BACK Exits a menu and 0B FREE TV the Manhattan helpline on buttons to step through the channels in showing at different times. the receiver on and off. returns to the main menu. 020 8450 0005 order. 19 0A Press OK to switch to the programme J or visit our website at www.manhattan-tv.com Press the V and V buttons to turn the highlighted by the orange bar. If the Mute - silences the EXIT Exits a menu and IN UST A 17volume0 upC or down.43 You can turn off the programme is on at the time, the receiver receiver’s sound. returns to normal TV viewing. Pantone Cool Grey 1C 11 0D 10 sound altogether with the button. The will switch to that channel immediately. If Find out more about Freesat sound comes back on when you press the programme is scheduled for later on, at www.freesat.co.uk 41again. 13 15 a reminder is set. When the programme is 0, 1 … 9 - buttons TV/DTV Switches the Join in at about to start, a message is displayed on to directly select channels TV SCART output between J community.freesat.co.uk Button labels Freesat and the TV’s tuner. Follow Freesat on 0E 42When 4su5btitles1 8are available for a screen and, after a few seconds, the receiver and enter numeric value 1C 44 programme it is indicated by a automatically switches to the necessary in the set-up menus. IFFY www.twitter.com/freesat_TV (e.g. GUIDE, MENU, etc) symbol in the browsing bar at the bottom of channel. Like Freesat on 1B 1F YOUR QUICK START GUIDE www.facebook.com/freesat the screen0B when you switch channels (press V Turns the volume up. Manhattan ‘i’ at anytime whilst watching TV to display When you have finished with the programme Switches back to the Model: Plaz 16 40 1A the bar). Press the SUB button to display guide, return to normal TV viewing by last channel watched. V Turns the volume down. a HD•S2 1the1 subtitles0D menu10 and use the and pressing EXIT. Pantone 1797CP buttons to move the orange highlight bar to “English” if you want to turn on subtitles, or Displays your P P Switches to the next UN PACK 54 48 12 50 1C“Off” to0 tuErn off subt4i4tles, and then press OK. favourites lists. or previous channel. Moves one page up or down in the channel Unpack and check If audio description (a spoken description of list and programme guide. Remote body Pantone Black C 16 40 1A the contents of your the broadcast) is available for a programme MENU Displays the 1Manhattan Plaza HD•S2 Plaza HD•S2 receiver 01 02 03 it is indicated by an symbol in the main menu screen. with Matte nish abc def abc def abc def abc def File Version: v3 2nd Generation Remote Control L Freesat receiver pack: Date: 8/5/15 Manhattan Plaza HD-T2 & HD-S2 Author: Alex Arbab-Zadeh ET 54browsing48 bar.1 2To turn50 on audio description, AD Displays the available audio menu to choose between normal Color Guide Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted ’ press the AD button to display the available 2nd Generation Remote Control Date: 2/9z/14 S G Manhattan Plaza HD-T2 & HD-S2 Pantone 1797 CP Author: Alex Arbab-Zadeh WATCH TV 19 0A Pantone 354 C 2X Change the channel you are watching by the scheduled programmes using the and Manhattan audio menu and then select “English Audio sound and audioentering the three-digit description. channel number buttons to move through the channels Displays channel and Plaza HD • S2 Remote Control Model: Plaza HD•S2 Color Guide Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted 17 0C 43 using the number buttons on the remote and the and buttons to move the orange Pantone Yellow C 6 For assistance, please call control. Or, you can press the P or P highlight bar to show the programmes Standby - switches BACK Exits a menu and FREE TV the Manhattan helpline on

buttons to step through the channels in showing at different times. the receiver on and off. returns to the main menu. Pantone 1797 CP Pantone Process Cyan C 020 8450 0005 01 02 03 order. 41 13 15 or visit our website at ET abc def abc def 19 0A Press OK to switch to the programme J 04 05 06 Pantone 354 C 2X www.manhattan-tv.com Description (MPEG)”. programme information. Press the V and V buttons to turn the highlighted by the orange bar. If the Mute - silences the EXIT Exits a menu and IN UST A mno mno mno mno returns to normal TV viewing. ghi ghi ghi ghi volume up or down. You can turn off the programme is on at the time, the receiver receiver’s sound. jkl jkl jkl jkl 17 0C 43 42 45 18 Pantone Yellow C sound altogether with the button. The will switch to that channel immediately. If Find out more about Freesat sound comes back on when you press the programme is scheduled for later on, 2nd Generation Remote Control at www.freesat.co.uk Pantone Process Cyan C 41again. 13 15 a reminder is set. When theDa tprogrammee: 19/8/14 is 0, 1 … 9 - buttons TV/DTV Switches the Join in at 1B 1F Manhattan Plaza HD-T2 & HD-S2 community.freesat.co.uk 0B about to start, a messageA uthois displayedr: Alex A rbaonb -Zadeh to directly select channels TV SCART output between J WATCH TV 42When 4su5btitle1s 8are available for a screen and, after a few seconds, the receiver and enter numeric value Freesat and the TV’s tuner. Follow Freesat on www.twitter.com/freesat_TV Digital text and interactive services are programme it is indicated by a automaticallyChange switches the channel to youthe arenecessary watching by the scheduledin the programmesset-up menus. using the and IFFY Manhattan Like Freesat on symbol in the browsing bar at the bottom of channel. entering the three-digit channel numberColor Guidebuttons to move through the channels Plaza HD-T2 Plaza HDPlaza • S2 HReDm-S2ote Control Remote Codes Rear Layout PlazaModel: H PlaDz-aT2 HD•S2 Inverted Plaza HD-S2 Inverted 1B 1F using the number buttons on the remote and the and buttons to move the orange YOUR QUICK START GUIDE www.facebook.com/freesat 11 0D 10 Sample 1: the screen0B when you switch channels (press 6 V Turns the volume up. Pantone Cool Grey 1C For assistance, please call control. Or, you can press the P or P highlight bar to show the programmes Standby - switches BACK Exits a menu and FREE TV the Manhattan helpline on ‘i’ at anytime whilst watching TV to display When you have finished with the programme Switches back to the Pantone 877C buttons to step through the channels in showing at different times. the receiver on and off. returns to the main menu. Pantone 1797 CP 020 8450 0005 the bar). Press the SUB button to display guide, returnorder. to normal TV viewing by last channel watched. V Turns the volume down. 0D Press OK to switch to the programme 19 0A J or visit our website at 1the1 subtitles menu10 and use the and pressing EXIT. Pantone 354 C 2X Button labels www.manhattan-tv.com Sample 2: Press the V and V buttons to turn the highlighted by the orange bar. If the Mute - silences the EXIT Exits a menu and IN UST A 0E buttons to move the orange highlight bar to volume up or down. You can turn off the programme is on at the time, the receiver receiver’s sound. returns to normal TV viewing. Pantone Yellow C 17 0C 43 1C 44 available from some Freesat channels, Pantone Cool Grey 2C Switches“English” if you want to turn on subtitles, between or sound altogether with the button. The will switch to Displays that channel your immediately. If (e.g.P GUID P E Switches, MEN toU the, e nexttc) Find out more about Freesat UNPACK Button labels MODE sound comes back on when you press the programme is scheduled for later on, at www.freesat.co.uk “Off” to0 turnE off subtitles, and then press OK. favourites lists. or previous channel. Moves one 04 05 06 1C 44 Pantone Process Cyan C Join in at Switches41 the1 3 15 (e.g. GUIDE, MENU, etc) again. a reminder is set. When the programme is 0, 1 … 9 - buttons page up or down in theTV/ channelDTV Unpack and check ghi jkl mno ghi jkl mno about to start, a message is displayed on to directly select channels TV SCART output between J community.freesat.co.uk 16 40 1A If audio description (a spoken description of list and programme guide. Follow Freesat on When subtitles are available for a screen and, after a few seconds, the receiver and enter numeric value Freesat and the4 TV’s2 tuner.45 18 the contents of your 16 40 1A Pantone 1797CP www.twitter.com/freesat_TV S the broadcast) is available for a programme programme it is indicated by a automaticallyMENU switches Displays to the the necessary in the set-up menus. IFFY 1Manhattan Plaza HD•S2 Plaza HD•S2 receiver Pantone 1797CP Like Freesat on it is indicated by an symbol in the symbol in the browsing bar at the bottom of channel.main menu screen. 1B 1F File Version: v3 FreesatYOUR receiver QUICK pack:2nd Generation RemoSteT ConAtrol RT GUIDE www.facebook.com/freesat the screen when you switch channels (press Sample 1: Turns the volume up.0DatBe: 8/5/15 5mm V Manhattan Plaza HD-T2 & HD-S2 54 48 12 50 54browsing48 bar.1 2To turn50 on audio description, AD Displays the available audio Author: Alex Arbab-Zadeh ‘i’ at anytime whilst watching TV to display WhenP youant haveone finished877C with the programme Switches back to the Manhattan and you can use them by following the on- Up, down, left, right - available screen display modes. Color Guide Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted

press the AD button to display the available the bar). Press the SUB button to display guide, return to normal TV viewing by last channel watched. menu to choose betweenV Turns normal the volume down. Pantone 1797 CP Model: Plaza HD•S2 19 0A Remote body Pantone Black C audio menu and then select “English Audio the subtitles menu and use the and pressing EXIT Displays. channel and sound andR audioemo description.te body11 Pa0DntPantone 3541 C 2X0 Black C Pantone Yellow C 17 0C 43 T Sample 2: 01 02 03 Pantone Process Cyan C 41 13 15 abc def abc def Description (MPEG)”. buttons to move the orange highlight bar to programmeabc information.def abc def 42 45 18 abc abc 01 02 03 abc abc “English” if you want to turn on subtitles, or Pantone Cool Grey 2C Displays your P P Switches to2nd Genetheration Remo nextte Control def def def def Date: 19/8/14 UNPACK 1B 1F Manhattan Plaza HD-T2 & HD-S2 Author: Alex Arbab-Zadeh 0B Button labels WATCH TV

Digital text and interactive services are Change the channel you are watching by the scheduled programmes using the and Manhattan entering the three-digit channel number buttons to move through the channels P0laza HD E• S2 Remote Control “Off” to turn off subtitles, and then press . or previous C olorchannel. Guide Plaza Moves HD-T2 P lazaone HD-S2 Remote Codes Rear Layout PlazaModel: H PlaDz-T2a HD•S2 Inverted Plaza HD-S2 Inverted favourites lists. and the and buttons to move the orange OK 6 using the number buttons on the remote Pantone Cool Grey 1C 11 0D 10 control. Or, you can press the P or P highlight bar to show the programmes Standby - switches BACK Exits a menu and For assistance, please call FREE TV the Manhattan helpline on

buttons to step through the channels in showing at different1 times.C the receiver on and off. returns to the main menu. 44 Pantone 1797 CP 020 8450 0005 order. Press OK to switch to the programme 19 0A J or visit our website at www.manhattan-tv.com (e.g. GUIDE, MENU, etc) Press the and buttons to turnPan thetone highlighted354 C 2X by the orange bar. If the Mute - silences the ButtonEXIT labels Exits a menu and V V IN UST A 0E pagevolume up up or down. Youor can turn off thedown programme is on at the time, thein receiver thereceiver’s sound. channel returns to normal TV viewing. 1C 44 Pantone Yellow C 17 0C 43 Find out more about Freesat Unpack and check available from some Freesat channels, Switches betweensound altogether with the button. The will switch to that channel immediately. If (e.g. GUIDE, MENU, etc) MODE sound comes back on when you press the programme is scheduled for later on, at www.freesat.co.uk Manhattan 04 05 06 Pantone Process Cyan C Join in at again. a reminder is set. When the programme is 0, 1 … 9 - buttons TV/DTV Switches41 the1 3 15 Model: Plaza HD•S2 ghi jkl mno ghi jkl mno ghi jkl mno ghi jkl mno about to start, a message is displayed on to directly select channels TV SCART output between J community.freesat.co.uk 16 40 1A When subtitles are available for a screen and, after a few seconds, the receiver and enter numeric value Freesat and the4 TV’s2 tuner.45 18 Follow Freesat on Pantone 1797CP www.twitter.com/freesat_TV list andprogramme it is indprogrammeicated by a automatically switches to the necessary inguide. the set-up menus. IFFY If audio description (a spoken description of Like Freesat on symbol in the browsing bar at the bottom of channel. 1B 1F www.facebook.com/freesat A the screen when you switch channels (press Sample 1: Turns the volume up.0B YOUR QUICK START GUIDE the contents of your V 54 48 12 50 and you can use them by following the on- Up, down, left, right - available screen display‘i’ at anytimemodes. whilst watching TV to display WhenP youant haveone finished877C with the programme Switches back to the

the bar). Press the SUB button to display guide, return to normal TV viewing by last channel watched. V Turns the volume down. the subtitles menu and use the and pressing EXIT. 16 40 Remote body11 1Pa0Dntone1A0 Black C buttons to move the orange highlight bar to Sample 2: 01 02 03 the broadcast) is available for a programme Displays the “English” if you want to turn on subtitles, or Pantone Cool Grey 2C Displays your P P Switches to the next UN PACK abc def abc def abc def abc def Button labels LET’S GET MENU “Off” to turn off subtitles, and then press OK. favourites lists. or previous channel. Moves0 Eone 1C 44 (e.g. GUIDE, MENU, etc) page up or down in the channel Unpack and check Manhattan Plaza HD•S2 Plaza HD•S2 receiver 04 05 06 If audio description (a spoken description of list and programme guide. the contents of your 1 16 40 1A ghi mno ghi mno ghi mno ghi mno the broadcast) is available for a programme Displays the 1 jkl jkl jkl jkl Pantone 1797CP MENU Pantone 1797CP Manhattan Plaza HD•S2 ghi Plaza HD•S2 jkrecleiver mno ghi jkl mno 04 05 06 ghi jkl mno ghi jkl mno screen prompts and pressing or the move the highlight bar in menus it is indicated by an symbol in the main menu screen. Freesat2nd re Gceneivereration Rpack:emote Control TEXT Date: 19/8/14 Manhattan Plaza HD-T2 & HD-S2 browsing bar. To turn on audio description, AD Displays5 the4 available48 audio12 50Author: Alex Arbab-Zadeh it is indicated by an symbol in the menu to choose between normal Color Guide Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 InvPelazrteda HD-S2 Inverted press the button to display the available move the highlight bar in menus main menu screen. AD Pantone 1797 CP 5mm screen prompts and pressing or the audio menu and then select “EnglishRemo Audiote body Pantone Black C sound and audio description. Pantone 354 C 2X 19 0A Displays channel and Pantone Yellow C 170C 43 2nd Generation Remote Control abc def abc def 01 02 03 Pantone Process Cyan C 411315 abc def abc def STARTED Description (MPEG)”. programme information. 07 08 09 424518 pqrs tuv wxyz Freesatpqrs rtuvecwxyeiverz pack: pqrs tuv wxyz pqrs tuv wxyz 1B 0B 1F W ATCH TV PSampleantone 1: 877C Digital text and interactive services are 6 enCu shitannegrig nteheg bt tBhy hnu re oae cha wn mcbtd hshrua mbea tnbee ntodtunreon hv ttoeb-dneeluls stiyttosc ghn toaniorstheuo n dtcuaresdPoh g tulo ahalnnn e zw d ateah Hplte crDnu ohinr eg• mrS2agbotm e Rmer e emso utesi CnongD troMal anhattanodete:l: Pla z 19/8/14a HD•S2 110D10 Additionalobcorudntetoro.nls. o O tormpI r,r oog syvntoerua pt m hcatemhn frore eopr Ssuacr otagneshssignv oeedt wtrhehb hoiynge n-cghl ha saianwgtnndh itdtc too iff Eel bahefftxisheS. tsr seramplei ento tm n ah t aesme Fthi niRom 2:nmwEeuE es.t a nhTnueVd . reF0ttho20uerr na M8s4a snh5is0ta a0005tntacen, phleelapslien ceal oln Pr e ass n bd uthettoPh nirg e tsbohs toy slis gtw thtedhuietcr noh Mrt anhtuoet g teeh -eba s proiler. nButIgfc retast hmEo texinhem P tslaae n b atels oneme IN nJ CUuoolS aTn AdG reeywotruw 2Cvrwinss.itm oaunrh waetbtasnit-et vat.com 0E Manhattan Plaza HD-T2 & HD-S2 available from some Freesat channels, MODE Switches betweensvounlu m dY beaou lut tpwo ptcrgoi aogloenln rts. r hdwTtaeuohmitcrwre nmw hn. reioe tto ffhcis e t tiohvheneat rat ’( sce h.tsogah.nn euGUID ntteidmeol. inmEo, ,mert MENmhead rli aeTUtcVe, lievyvti.eec Irw)f ingatFiww. n dw o.ufreet msoarte. caob.uoukt Freesat 1C 44 TEXT ghi jkl mno ghi jkl mno 04 asogua0nind. 5co math breeoues mp btriack ontgodr es aortd0m na i0irs rm,we t s61,cthee a…t l iy.msn W9 s syee -cohssagl heeubuenc ptdt rtuctooeehhl uSwseinastpsd n sp d i nufrtctioselotphg r bs rlelae aasJytmt nwteerdhmdee e ooe Tnn iV, s F rSeeCAJcsoomaRintT a imnn udatni t hety .freesat.co.uk 16401A ghi jkl mno ghi jkl mno When susbctiretenles an ard,een aatfvetare ilrn aub mflewee rfi cos eTrv caVaol’u nsPe dta unsinn, t tteonehh re.eI Frs e1797CPecFt-eiuYvpe r Follow Freesat on Up, down, left, right - available screen displaystpr hmodes.y inoem g sbtracheolrem enb meacrhuo whatw onneistme iniasgl .ty iobcanumeadi rlls ycawn atsui ttctwes.hedhitc cbbottohhyea san netomT lust ohe r(pnf s rn eteshsceYe OvossaUluRrmy QUI Ae uCputhowLiK aw kSnewTd FA.ftrRewacesTiet GUItabetor ook.Dcomn:E . coA/mfree/lfreesaetsax_Tt 5VA4481r25ba0 b-Zadeh and you can use them by following the on- s‘ithu’ eatb tba iabtlnure ).ayttost n pPrWgmimdreunehe i. essdston sewhnui ,nt d yahrgioiensel stutpd u cl h aurhw Snavysawa ennttote ihttcc hefi enh eniln oe wisgrmatch baTVeRademlhc tokwe T d.Vt i o tdo h tvi Petsp idtheea bhownlaeown tily onendastp gyr.og b Blackyr amm C e 07 08 09 b“OEunftftg”oli ntsosh ”.t uoifr m ny ooufvf ew s tauhnbleit sD oits.tirsolaep tnslua,g ryaensn hdoyin ogtu hsrlienu pagfg bSw a ht pv it troe i elbtcpu eusars,hsperit e vteosoisro UN tPu doAoCKs t wncheha inennn txelht .eaor M bchocdavenefnes oln e abcdef 010203 abcdef abcdef If audio description (a spoken deslicriptist ando np1 roogUt fhn erpaa comcnkmet aenn gdtus ci dhoef .cyko ur Displaysscreen prompts andthe pressing TEXT or the availablemove the highlight bar in menus audio tibthr oiesw b isrnd soadcainy inigmc abatbhetolesrd. t) T b oisy t aanurvsan cDir laoeeisnbp nalea.u yfdsoi ort head ep scmr oDriaeginupsrammntp im lotanoenuy ,sc e hMFrte heoesareaceion svah2eteva rbat pietlgatwenPbchzak lelaiP j:rHeckei lanDlvuzm •neradSo inH2oro mD•aSl ghijklmno 040506 ghijklmno ghijkl mno pre bssu ttothen to display the availables ound and audio description. YOUR USER GUIDE browsing bar. To turn on audio description, and in the programme guide, audio menu and then D sispelelacty s“ Ecnhgalinnshe lA aunddi o 070809 1D 00 14 programme information. LET’S GET button while watching the channel. This Description (MPEG)”. pqrtsuvwxyz pqrtsuvwxyz pqrtsuvwxyz pqrtsuvwxyz 54 48 12 Digi5tal text are and interacAtidditiv0 Swe sitceornalhveics eI nbsefotween available pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz available from some Freesscareet cnh adnisnepllasy, amnodd es. AD 07 08you can us0e Uthemp9, do bwny f,o lellfotwi, rniggh tthe - on-screen button while watching the channel. This pqrs and int uthev programmewxyz guide, pqrs tuv wxyz whmeproilnmeu p o wotsr fat bt usahecettmanhrllnd ivonod inpvcwg ie r ne t syt hs toheavsehui enc ath hgpiloia agr obnnebhgrllitooer gDaw lf hi.mmsrs teoTpe lmhbl etaiacteshe yrt sghd ia nuaicts heshtimpd uancleabe hs,ynt auanisunteb lsnaletds iel ttly epse m. enu 1D0014 pqrs tuv wxyz pqrs tuv wxyz or broadcaasnterd .p rogrammjklT“nehesib. ”“5 of” b0.7utmto hni mghustt and ha vwei dath. Additional Info Whsperer ovsser.i ncine ysgo, ure ht Sauevrnele ficttons i nstohheremd op Tawdahel Dtvi igTitaioihs Vitpositionlp a t vlilbhan itley easw )ix nQ.minGtinSt uarutsetg i eriMercnG sdakbr uuevaacmc y.iBidetiremoc tneiateavcof rirr Uotvesiknree lR csedoemo(tsthr owhtean lrH nte o wD de rteanoaci roMth edyn IHD-n ca TVecbtle displays a menu of services available from and allow you to browse the TSUBhe “5Displays” but the subtitlesttoYoon bueie gcan shh tbuto n .d fiSwitcwna n yads nmusto oadnhuhe pat o r lathe lef dfts he syu D oprosti suFihnpregeg lrea ebrtyashucsmaet tit mhev ocerhne acthe sagbhn syanecheduleda nnpginlrrseey tosul vspl ic is tnitrug.clern tehe . a Press th.e ibt utb ountttoo. n,n an Ddi spthelanyCUS sp trhesseT OMER00FFp Crhoogoras mesm oep tions within menus. 07 08 09 guide. vC2O.3DE that channel or broadcaster. channels and programmes. jkl menu to select 1a subtitleD 0 type.0 14 The “5” button must have a “nib” of 0.7m hight and width. Color Guide When you have finished with the interactive Quick Start Main User Batteries for the Remote HDMI cable to connect Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted jkl “nib” of 0.7m hight and width. menu to chooseservices, return to normal TVbetween viewing by OK Selects the option in a menu. normalTTEXThe position Displays interactive is marked withGuide Guide remote control control to an HD-ready TV press the AD button to display the available The positionpressing is TEXT marked or EXIT with. and digital text services Additional Info (where available). Displays the subtitlesYou can find out the programmes scheduledthe g rey ci rcle. the grey circle. Pantone 1797 CP and allow you to browse the to be shown on all the Freesat channels up to Switch off your receiver by pressing the Displays the channel list. displays a menu of services available from SUB LIST eight days ahead usingCUS theT OMERGUIDE bu00FFtton. button, and press the button again to turn 19 0A 5mm Remote body Pantone Black C Press the button and then pressCODE OK. Browse it on. CUSTOMER 00FF Pantone 354 C 2X GUIDE Displays the audio menu and then select “English Audio Displays channel and sound and audio description.programme guide. Chooses options within menus. CODE Pantone Yellow C 17 0C 43 v2.3 pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz channels and programmes. menu to select a subtitle type. 01 02 03 Pantone Process Cyan C 41 13 15 that channelDescription or broadcaster. (MPEG)”. programmeabc information.def abc def abc def abc def 07 08 09 1D 00 14 42 45 18 pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz R Sample 1: 1B 0B 1F W ATCH TV Pantone 877C Digital text and interactive services are Change the channel you are watching by Browse the scheduled programmes using Manhattan entering the three-digit channel number the and buttons to move through Plaza HD • S2 Remote Control Model: Plaza HD•S2 6 using the number buttons on the remote the channels and the and buttons to 11 0D 10 control. Or, you can press the or move the orange highlight bar to show the Standby - switches the Exits a menu and returns For assistance, please call Sample 2: FREE TV the Manhattan helpline on The “5” button must have a buttons to step through the channels in programmes showing at different times. receiver on and off. to the main menu. 020 8450 0005 order. Additional Info Pantone Cool Grey 2C or visit our website at Press to switch to the programme J Button labels www.manhattan-tv.com Press the and buttons to turn the highlighted by the orange bar. If the Mute - silences the Exits a menu and returns IN UST A 0E volume up or down. You can turn off the programme is on at the time, the receiver receiver’s sound. to normal TV viewing. 1C 44 will switch to that channel immediately. If Quick(e.g. GUIDE, MENU, etc) Start Find out more about Freesat Main User Batteries for the Remote HDMI cable to connect available from some Freesat channels, Switches betweensound altogether with the button. The

When you have finished with the interactive MODE sound comes back on when you press the programme is scheduled for later on, at www.freesat.co.uk 04 05 06 Join in at again. a reminder is set. When the programme is 0, 1 … 9 - buttons to Switches the TV SCART ghi jkl mno ghi jkl mno about to start, a message is displayed on directly select channels and output between Freesat and the J community.freesat.co.uk 16 40 1A ghi jkl mno ghi jkl mno jkl Follow Freesat on When subtitles are available f or screena and, after a few seconds, the receiver enter numeric value in the set-up TV’s tuner. Pantone 1797CP programme it is indicated b y a automatically switches to the necessary menus. IFFY www.twitter.com/freesat_TV symbol in the browsing bar at the bottom of channel. Like Freesat on the screen when you switch channels (press Turns the volume up and YOUR QUICK START GUIDE www.facebook.com/freesat 54 48 12 50 “nib” of 0.7m hight and width. and you can use them by following the on- Up, down, left, right - available screen display‘i’ at anytimemodes. whilst watching TV to display When you have finished with the programme Switches back to the last down. the bar). Press the button to display the guide, return to normal TV viewing by channel watched. subtitles menu and use the and pressing . Guide Guide remote control control to an HD-ready TV Remote body Pantone Black C Displays interactive buttons to move the orange highlight bar to Switches to the next or 01 02 03 Selects the option in a menu. abc def abc def abc def abc def “English” if you want to turn on subtitles, or Displays your favourites previous channel. Moves one UN PACK STARTED services, return to normal TV viewing by TEXT OK “Off” to turn off subtitles, and then press . lists. page up or down in the channel 07 08 09 list and programme guide. Unpack and check If audio description (a spoken description of the contents of your the broadcast) is available for a programme Displays the main menu 1 Manhattan Plaza HD•S2 ghi Plaza HD•S2jk relceiver mno ghi jkl mno 04 05 06 ghi jkl mno ghi jkl mno screen prompts and pressing or the move the highlight bar in menus it is indicated by an symbol in the screen. Displays the available audio 2nd Generation Remote Control TEXT Freesat receiver pack: Date: 19/8/14 Manhattan Plaza HD-T2 & HD-S2 browsing bar. To turn on audio description, menu to choose between normal Author: Alex Arbab-Zadeh press the button to display the available Color Guide Plaza HD-T2Plaza HD-S2Remote CodesRear LayoutPlaza HD-T2P Inlazaver tHedD-S2 Inverted sound and audio description. Pantone 1797 CP Pantone 354 C 2X 19 0A audio menu and then select “English Audio Displays channel and Pantone Yellow C 170C43 Pantone Process Cyan C 411315 07 08 09 and in the programme guide, Description (MPEG)”. programme information. pqrs 4tu245v18 wxyz pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz 1D 00 14 1B 1F The position is marked with Digital text and interactive services are Switches between available SPamntpolnee 1: 877C 0B button while watching the channel. This Sample 2: 110D10 and digital text services Additional Info Pantone Cool Grey 2C pressing or . available from some Freesat channels, and screen display modes. (e.gB. utGUIDtonE la, MbelsENU, etc) 1C0E44 wxyz wxyz Pantone 1797CP 16401A pqrs tuv pqrs tuv TEXT EXIT you can use them by following the on-screen Up, down, left, right - 54481250 RemoPtaen btoondey Black C 07 08 09 abdcef abdcef 010203 abdec f abdcef and in the programme guide, prompts and pressing or the button move the highlight bar in menus ghjiklmno ghjiklmno 040506 ghjiklmno ghjiklmno 1D 00 14 button while watching the channel. This pqtrusvwxyz pqtrusvwxyz 070809 pqtrusvwxyz pqtrusvwxyz pqrs tuv wxyz pqrs tuv wxyz Additional Info pqrs tuv wxyz pqrs tuv wxyz while watching the channel. This displays a and in the programme guide, and Displays the subtitles menu 1D0014 jklT“niheb ”“ 5o”f b0ut.7mton hig musht andt ha vwidth.e a menu of services available from that channel allow you to browse the channels Ttohe select “5 a subtitle” but type.ton must have a theThe gporesyi tcioirncl ise. marked with CUCSODET0OM0FFER or broadcaster. and programmes. jkl “nib” of 0.7m hight and width. When you have finished with the interactive Displays interactive and Quick Start Main User Batteries for the Remote HDMI cable to connect services, return to normal TV viewing by Selects the option in a menu. Tdigitalhe positiontext services (where is marked withGuide Guide remote control control to an HD-ready TV Additional Info pressing or . available). (where available). Displays the subtitlesYou can find out the programmes scheduled the grey circle. You can find out the programmes scheduled and allow you to browse the to be shown on all the Freesat channels up Switch off your receiver by pressing the Displays the channel list. displays a menu of services available from TSUBhe “5” button must have a the grey circle. to eight days ahead using the button. button, and press the button again to turn Press the button and then press . it on. CUSTOMER 00FF Displays the programme Chooses options within menus. guide. CODE v2.3 T to be shown on all the Freesat channels up to Switch off your receiver by pressing the that channelLIST or broadcaster. Displays the channel list. channels and programmes. menu to select a subtitle type. YOUR USER GUIDE jkl 1D 00 14 CUSTOMER 00FF eight days ahead using the button. and press the button again to turnThe “5” button must have a “nib” of 0.7m hight and width. GUIDE button, When you have finished with the interactive Quick Start Main User Batteries for the Remote HDMI cable to connect jkl “nib” of 0.7m hight and width. CODE Press the button and then press OK. Browse it on. services, return to normal TV viewing by OK Selects the option in a menu. TTEXThe position Displays interactive is marked withGuide Guide remote control control to an HD-ready TV Additional Info The positionpressingGUIDE is TEXT mar kedor EXIT withDisplays. the and digital text services You can find out the programmes scheduled (where available). E Displays the subtitlesthe grey ci rclprogrammee. guide. Chooses options withinthe menus. grey circle. and allow you to browse the to be shown on all the Freesat channels up to Switch off your receiver by pressing the Displays the channel list. displays a menu of services available from SUB LIST CUSTOMER 00FF eight days ahead using the GUIDE button. button, and press the button again to turn v3.1 Press the button and then press . Browse it on. Y CODEOK CUSTOMER 00FF GUIDE Displays the programme guide. Chooses options within menus. OUR USER GUIDED CODE that channel or broadcaster. channels and programmes. menu to select a subtitle type. v2.3 1D 00 14 1D 00 14 When you have finished with the interactive Quick Start Main User Batteries for the Remote HDMI cable to connect services, return to normal TV viewing by OK Selects the option in a menu. TEXT Displays interactive Guide Guide remote control control to an HD-ready TV The “5” button must have a pressing TEXT or EXIT. and digital text services jkl You can find out the programmes scheduled (where available). “nib” of 0.7m hight and width. to be shown on all the Freesat channels up to Switch off your receiver by pressing the LIST Displays the channel list. eight days ahead using the GUIDE button. button, and press the button again to turn The position is marked with Press the button and then press OK. Browse it on. GUIDE Displays the the grey circle. programme guide. Chooses options within menus. v3.1 CUSTOMER 00FF CODE HDMI cable to connect to Batteries for the Quick Start Guide Main User Guide an HD-ready TV remote control Remote control

Plaza HD•S2 receiver

5 YOUR RECEIVER Manhattan Plaza HD•S2 Front POWER INDICATOR LIGHT (red for standby, blue for on)

CHANNEL CHANGE UP/DOWN The up/down arrows on the front are for changing channel

STANDBY Switch the receiver on and off 6

Manhattan Plaza HD•S2 Rear

LNB IN ETHERNET POWER CABLE Input for connection to Network socket for For connection to a mains satellite dish connection to the Internet plug socket

USB Socket for upgrading the receiver’s software

HDMI Output for connection to a HD-ready television

OPTICAL S/PDIF Optical audio output for TV SCART connection to a digital audio Output for connection to a system non-HD television 7 File Version: v3 2nd Generation Remote Control Date: 8/5/15 Manhattan Plaza HD-T2 & HD-S2 Author: Alex Arbab-Zadeh

Color Guide Plaza HD-T2 Plaza HD-S2 Remote Codes Rear Layout Plaza HD-T2 Inverted Plaza HD-S2 Inverted

Pantone 1797 CP REMOTE CONTROL 19 0A Pantone 354 C 2X Pantone Yellow C 17 0C 43 Standby - switches the receiver on and off.

Pantone Process Cyan C 41 13 15 Mute - silences the receiver’s sound. 42 45 18

1B 1F 0B 0, 1 … 9 - buttons to directly select channels, enter numeric value in the set-up menus and to enter your postcode. Pantone Cool Grey 1C 11 0D 10

Button labels 0E Switches back to the last channel watched. (e.g. GUIDE, MENU, etc) 1C 44 16 40 1A Pantone 1797CP Displays your favourites lists and adds channels to them in 54 48 12 50 the channel list. Remote body Pantone Black C with Matte nish abc def abc def 01 02 03 abc def abc def MENU Displays the main menu screen. ghi jkl mno ghi jkl mno 04 05 06 ghi jkl mno ghi jkl mno 5mm 07 08 09 Displays channel and programme information. Additional Info pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz pqrs tuv wxyz 1D 00 14 The “5” button must have a jkl “nib” of 0.7m hight and width. The position is marked with the grey circle. CUSTOMER 00FF CODE 8 Up, down, left, right - move the highlight bar in menus V Turns the volume up. and in the programme guide, and allow you to browse the channels and programmes. V Turns the volume down.

OK Selects the option in a menu.

P P Switches to the next or previous channel. Moves one page up or down in the channel list. LIST Displays the channel list.

AD Displays the available audio menu to choose between GUIDE Displays the programme guide. normal sound and audio description.

BACK Exits a menu and returns to the main menu. MODE Switches between available screen display modes.

EXIT Exits a menu and returns to normal TV viewing. SUB Displays the subtitles menu to select a subtitle type.

TV/DTV Switches the TV SCART output between Freesat and TEXT Displays interactive and digital text services (where the TV’s tuner. available).

Red, green, yellow, blue – Chooses options within menus.

9 Preparation CONNECTING YOUR RECEIVER This section explains how to set up your Plaza HD•S2 Place your Plaza HD•S2 receiver on a firm, level surface close to the to receive Freesat channels. television, a mains electricity socket, and the cable from the dish. (See Appendix A – Safety.) 2THE SATELLITE DISH

To receive Freesat, you must connect your Plaza HD•S2 receiver to an appropriate satellite dish, fixed in position and accurately pointed at the 28.2° East satellite position.

For safety reasons and to provide reliable reception, we strongly Connect the cable from your dish to the LNB IN socket at the back recommend that you have your dish installed by a professional. of the receiver (if the dish cable is fitted with a wall socket inside You may be able to use a satellite dish already installed at your your home, you will need a connecting cable, which you can get home. If you have any questions about the dish, please consult from your installer). your installer. 10 To watch On Demand TV services including BBC iPlayer and ITV Player, HINT: The “F-connector” used for the satellite dish cable the Plaza HD•S2 must be connected to your internet router or hub connection has a central wire that is inserted into the hole using an ethernet cable (not supplied). Plug one end of the ethernet in the LNB IN socket while the collar is screwed onto the cable into the ETHERNET socket at the back of the Plaza HD•S2, and socket. When screwing on the collar, make sure that the the other into your hub or router. Make sure the connections are fully central wire goes into the socket hole and is not bent to pushed in - you’ll hear a click as they lock into place. Consult your one side. router or hub’s documentation for further guidance.

If your receiver is not located near your hub or router, you could use Turn off your television and connect the HDMI cable supplied HomePlug powerline adapters to extend your home network using between the HDMI socket at the back of your Plaza HD•S2 receiver the ring main of your house. Another option is to use a Wireless and an HDMI socket on your television. There may be more than Ethernet Bridge to bridge the Ethernet socket of the Plaza HD•S2 one HDMI socket on your television. If you are not sure which to to Wi-Fi, enabling it to connect wirelessly to your home network. use, check the television’s manual. For more information, please consult with your installer or retailer. If you require support for these devices, you will need to contact the manufacturer. The Plaza HD•S2 does not support USB Wi-Fi dongles. HINT: If your television has no HDMI socket, then it must be connected to the receiver by SCART cable, and you will SWITCHING ON not be able to watch Freesat channels in high definition.

Plug the power cable from the rear of the Plaza HD•S2 into an available mains socket that is turned off.

You can also connect the Plaza HD•S2 receiver to a stereo or surround sound system, so that you can listen to the TV sound through the sound system instead of (or as well as) the television’s speakers. If you connect an optical lead (not supplied) between the Take off the battery compartment cover from the back of the S/PDIF sockets on your receiver and digital sound system, you can Plaza HD•S2 remote control by lifting it up while pushing the catch. listen to the TV sound in digital audio quality, or even in surround Insert the two AAA batteries supplied, as shown on the inside of sound, depending on the broadcast and your sound system. the compartment, and replace the compartment cover. 11 SWITCHING ON (continued) After a few seconds, the receiver’s first Freesat installation screen Turn on your TV set and choose the HDMI input (see your shown below will appear on the television screen: television’s manual for guidance).

HINT: If you do not see this screen on your television, see ‘Troubleshooting’ on page 40.

TUNING IN When the first installation screen is displayed, use the or Switch on the mains socket the Plaza HD•S2 is connected to. buttons to select the screen format of your television (16:9 Widescreen or the squarer 4:3 Traditional). Then press the button to highlight the HDMI Resolution selection box, and use the or buttons to select the correct resolution for your television. Press to select the “Next” button and then press OK to display the next installation screen. 12 HINT: You should set the HDMI resolution to the highest that your television can display (see your television’s manual). If in doubt, set the resolution to 720p.

Enter your postcode using the number buttons on the remote control, or press the red button to use the on-screen soft keyboard. You do not need to enter a space. Once you have entered your postcode, press the button and then press OK to proceed.

The signal check screen shows the strength and quality of the Freesat signal received from your satellite dish. If the signal lock fails, switch HINT: Enter your postcode with the number buttons by the receiver off at the mains and try reconnecting the cable from your pressing the correct button on the remote a number of satellite dish to the LNB IN socket. If the connection is OK but the times to produce the relevant letter (printed above each signal lock still fails, you should consult your dealer or installer. button), or number, in the same way as ‘texting’ with a mobile phone. For example, for an ‘S’, you would press the When the signal lock is successful, press OK to proceed. 7 button four times. If you make a mistake, the button deletes the last character entered. Please note that in the extremely unlikely event of a major change to the broadcast of Freesat, for example because of satellite failure, it is possible the receiver won’t be able to automatically install. In such a situation, you can manually enter the information needed for the receiver to install by pressing the red button after the signal check fails. Such an event With the on-screen soft keyboard, enter each letter and number would almost certainly be national news, and you can check our website (www.manhattan- of the postcode by highlighting it on the keyboard using the tv.com) where this would be clearly stated along with instructions of what to do.

13 TUNING IN (continued)

and buttons, then pressing OK . The red button deletes the last letter entered and the green button confirms the whole postcode.

The setup completion screen confirms the lock PIN you have set. Press the OK button and your Plaza HD•S2 receiver is now ready for you to watch Freesat digital TV.

Your Plaza HD•S2 receiver will take a couple of minutes to find and store the available Freesat channels. The number of Freesat HINT: When new Freesat channels are introduced, you do TV and radio channels found is shown on the screen as the scan not need to retune your Plaza HD•S2 receiver because it is proceeds, along with an indication of how far the scan has to go. automatically updated. When the scan is complete, press the OK button to proceed.

To use the parental guidance function, locked channels & online content, hidden adult channels or restore to factory default, you need to create a PIN. Enter your choice of PIN by pressing the required number button 0, 1 … 9 for each of the four PIN digits, then press OK to proceed.

14 Everyday Use CHANGING CHANNELS Step through the channels by pressing the P or P buttons on

This section describes the day-to-day use of your Plaza the remote control or the and buttons on the front of the HD•S2 receiver – how to select the channels that you Plaza HD•S2 receiver. want to watch, view the programme schedules, and 3 control the basic features. If you know the channel’s number, you can switch directly to the channel you want by using the number buttons on the remote control. As you enter a channel number, each digit appears at TURNING ON THE RECEIVER the top left of the screen to show the number button you have pressed. All the Freesat channel numbers have three digits and Press the button on the remote control or the button on the the first channel is 101. The radio stations are stored from channel front of the receiver. The power light on the front panel changes from number 700. red to blue when the receiver is powered up. Press the button to switch from the channel you are currently You can turn off the Plaza HD•S2, so it goes into standby, by pressing watching to the channel you were watching before. the button on the remote control or the button on the receiver. When the receiver is in standby, the power light on the front panel turns red. The Plaza HD•S2 uses less power when in standby.

HINT: You should leave the Plaza HD•S2 receiver plugged in with the socket switched on, at all times (except when there HINT: There are some channel numbers missing in the is lightning – see Appendix A). When you are not using the channel list because spaces are left for future channels to receiver, put it in standby by pressing the button on the join Freesat. remote control or the button on the front of the receiver.

HINT: If you enter a number that does not exist, the HINT: To save power, the Plaza HD•S2 receiver will automatically channel will not change. switch to standby if it is not used for a long time. This feature can be disabled – see the Advanced Use section of this guide.

15 CHANGING CHANNELS (continued) It shows: There are other ways to change channel: • the name and number of the channel • Use the browsing bar at the bottom of the screen (see below) • the name of the programme you are watching • Use the on-screen channel list (see page 18) • the start and finish time of the programme • Use the programme guide (see page 19) • the progress through the programme • the date and time CHANGING THE VOLUME You can increase or decrease the volume by using the V and V buttons on the remote control. The sound is silenced by pressing the button and restored to its previous level by pressing the button again.

HINT: You can also display the browsing bar by pressing HINT: The mute control also affects the sound supplied to or on the remote control while you are watching TV. the VCR SCART socket, and so using this control while a programme is being recorded will affect the recording. The information bar may also display symbols to indicate:

BROWSING BAR The programme is in High Definition. Subtitles are available. Whenever you change channel, the Plaza HD•S2 briefly displays a Audio Description is available. browsing bar at the bottom of the screen that contains information Dolby Digital audio is available. about the current channel and programme. You can press the Parental guidance is advised as the programme contains button at anytime to display the bar again. language or scenes that may not be suitable for children (press for further details). The channel is locked (see the Advanced Use section). An HD version is available on another channel (press for further details). 16 While the bar is displayed, press the button to see details of the If you want to turn on subtitles, first display the subtitles menu by next programme, and the button to go back again. To see what pressing the SUB button and then use the and buttons is on another channel, press the or buttons. To change to to highlight “English” (or “English Teletext” for larger subtitles), this channel, press OK while the bar is still displayed. To remove and press OK. To turn off subtitles, select “Off” from the subtitles the bar from the screen at anytime, press EXIT. menu and press OK.

While the browsing bar is displayed, press again to display more information about the selected programme, including a short summary. Pressing the button once more removes the extra information from the screen.

Some programmes have an extra soundtrack to tell people who are HINT: When the extra programme information is displayed, blind or partially sighted what is happening on screen. Channels you can still press or to see what is on now or next and with this audio description available show the symbol in the and to see what is on other channels. information bar.

To turn on audio description, press the AD button to display the SUBTITLES AND AUDIO DESCRIPTION available audio menu and then select “English Audio Description (MPEG)”. Many Freesat programmes are broadcast with subtitles for people who are deaf or hard of hearing. Channels with subtitles available show the symbol in the information bar. 17 USING THE CHANNEL LIST Display the on-screen channel list by pressing the LIST button on HINT: Move a page at a time through the channel list by the remote control. This lists the channels on the left-hand side of using the P and P buttons. the screen, in number order, and displays a preview window of the currently selected channel on the right-hand side of the screen. You can return to watching TV at any time by pressing the EXIT button. TV and radio channels are stored in separate lists. Switch between the TV and radio channel lists by pressing the or buttons. The name of the list is displayed at the top of the screen.

SEARCHING FOR A CHANNEL You can search for a channel by name, or a part of its name. Press the green button while on the channel list screen and enter the word that you want to search for using the on-screen keyboard.

The receiver shows a list of all channels with the search word within their name, for you to choose from in the normal way. You can press or to see the search results for the different channel lists. Press to clear the search.

REGIONAL CHANNELS With Freesat, some channels, such as BBC1, broadcast regional HINT: You can also display the channel list by pressing the variations of their channels. The initial regional variations are OK button while watching TV. based on the postcode that you entered when you installed the Plaza HD•S2.

Use the or buttons on the remote control to highlight a You can replace the regional variation of a channel in the channel channel then press OK to view it in the preview window. Press OK list by pressing the blue button while the channel is highlighted. again to exit the channel list and watch the channel full-screen. The current list will change to show the regional variations of that channel (if available). 18 The Plaza HD•S2 programme guide displays details of all programmes showing on Freesat channels for the next week ahead.

To access the guide, press the GUIDE button on the remote control. Choose the section of the guide you want to look at – either all channels or a specific channel genre – by pressing the , , or buttons to highlight the section, and then OK to select it.

Choose the region that you want from the list by moving the highlight bar through the list with the and buttons and then pressing OK , or press BACK to leave the region setting unchanged.

USING THE PROGRAMME GUIDE

HINT: You can skip the genre choice stage by pressing the GUIDE button a second time, to jump straight to the programme guide for all of the channels.

The programme guide shows a table of the programmes, with each page showing eight channels over a two-hour period. 19 USING THE PROGRAMME GUIDE (continued) HINT: Programmes in standard definition that are also Information on the highlighted programme is shown above the available on another channel in HD are labelled in the table and you can read a full summary by pressing the button. schedules with an symbol. You can see the time and Press again to remove the summary box. channel that the HD version is broadcast by highlighting the programme and pressing . The current date and time is displayed at the top right of the screen and an orange line at the top of the table shows the present time in the schedule. If the programme is scheduled for later on, a reminder is set so that when the programme is about to start, a message is displayed You look through the scheduled programmes using the and on-screen and, after a few seconds, the receiver automatically buttons to move through the channels and the and buttons to switches to the relevant channel. In the programme guide a is highlight programmes showing at different times. shown next to a programme with a reminder set.

HINT: You can jump through the list more quickly using the P or P buttons to move to the next or previous page.

The green and red buttons move the highlight bar through the schedule two hours forward or back, and the blue and yellow buttons move a day forward or back.

As you move the highlight bar through the schedule, the You can see a list of all the programmes with reminders set programme summary shown above the list changes to reflect the by pressing the button, and you can cancel a reminder by programme highlighted. highlighting it and pressing the red button. Pressing again or BACK leaves the reminder list and returns to the programme guide. Press OK to switch the receiver to the channel and programme You can also cancel a reminder by highlighting the programme in highlighted. If the programme is on at the time, the receiver will the programme guide and pressing OK again. switch to that channel immediately. You can set as many reminders as you want but if you try to set a reminder on one channel for the same time as one you have already set on another channel, a warning is displayed on the screen. 20 You leave the programme guide and return to watching TV by pressing BACK or EXIT button.

INTERACTIVE TV SERVICES Several Freesat channels broadcast a range of digital text and interactive services, such as news, weather, games, sports information and video, alongside normal TV. If interactive services are available, they will be indicated by an on-screen prompt – usually a red button in the top right-hand corner of the screen.

You can use the interactive options by pressing TEXT or the red button while watching the TV channel. This will display a menu of the services available.

When you have finished with the interactive services, return to watching normal TV by pressing TEXT again or the EXIT button.

21 Advanced Use Highlight the channel that you want to include in a favourites list, and press the button to show the eight lists available. Highlight This section explains how to get the most out of your the list that you want to include the channel in and press to add Plaza HD•S2 receiver. the channel to that list (a star will appear next to it). You can add a channel to as many lists as you like. Channels can be removed 4 from favourites lists by highlighting a list and pressing the USING THE FAVOURITES LISTS button again. Press OK to store the changes to the lists, or press BACK to cancel. The favourites lists make it easier for you to choose the channel that you want to watch, by limiting the on-screen list to just a few You can rename the favourites lists to suit their contents (for example, channels, such as those of a particular type, or that one member the type of channels in the list, or the name of person who has chosen of the family watches the most. them). With the list highlighted, press the red button and enter the name that you want for that list using the on-screen keyboard. The Plaza HD•S2 provides eight favourites lists, and it only takes a short time to set up the lists before they can be used. First, display Once favourites lists have had channels assigned to them, they the channel list, by pressing the LIST button. can be used in three ways.

22 1. In the channel list, favourites lists can be selected in the same way as the Freesat TV and radio channel lists, by pressing the or buttons. Press OK to view a selected channel, to change the favourites lists it is assigned to, or PIN lock it by pressing the yellow button. Red deletes the selected channel from the current favourites list and green renames the current list.

2. During normal TV viewing, you can quickly choose a channel from the favourites lists by pressing the button. Use or to switch to the other lists, highlight the channel you want to watch, then press OK.

3. The programme guide can be filtered to only display the channels on a favourites list. Press GUIDE to display the genre HINT: The channels in a favourites list appear in the same screen, then press the button on the remote control to display order as in the normal channel list, regardless of the order your favourites lists. Highlight the list you want to choose, and you added them. press OK. Press BACK from the guide to choose a different list. 23 THE LOCK PIN If you have set up your receiver for a 16:9 Widescreen TV, the Some of the Plaza HD•S2’s functions can be locked to avoid options are: accidental changes to the receiver’s setup, and you can lock particular channels to prevent some family members, such as • Auto - the broadcaster chooses the best display format. children, from watching them. • Widescreen - a 4:3 broadcast is stretched to fill the 16:9 screen. • Pillarbox – a 4:3 broadcast is shown unaltered with black bars To use a locked menu function or watch a locked channel, you need on each side. to enter the four-digit PIN that you set when you first installed the Plaza HD•S2. You can change the lock PIN, without re-installing If you have set up your receiver for a 4:3 Traditional TV, the options are: the receiver, as explained later in this section. • Auto - the broadcaster chooses the best display format. • Centre Cut-out - a 16:9 broadcast is cropped to show only the centre of the image. • Letterbox - a 16:9 broadcast is shown unaltered with black bars above and below it.

TV/DTV If your TV is connected to the Plaza HD•S2’s TV SCART socket, pressing the TV/DTV button switches the channel displayed on the television between the signal from the aerial (TV) and digital television from Freesat (DTV). This button has no effect if your TV is connected to the receiver’s HDMI socket.

DISPLAY MODE CHANGING THE CHANNEL LIST Most Freesat programmes are broadcast using a widescreen 16:9 format, The channel list contains all the Freesat channels that the Plaza designed for a widescreen TV. If you watch a widescreen broadcast on a HD•S2 found when it was first installed, and may include some squarer 4:3 television, or a 4:3 broadcast on a widescreen TV, the Plaza channels that you do not watch, do not want to include in the on- HD•S2 provides a choice of how the image is displayed. Pressing the screen list, or do not want some members of your family to watch. MODE button will take you through the three available options. 24 USING THE SETUP MENUS If you want to alter the channel list, first press theLIST button to display the channel list screen. To remove a channel, highlight it You display the Plaza HD•S2’s setup menu by pressing the MENU and press the red button to delete the channel. You need to confirm button on the remote control. This shows the five sections in a your choice to ensure you don’t delete a channel accidentally. bar across the top of the screen with the first section highlighted in orange. The menu options for the highlighted section are listed below, along with a picture representing that section.

You can choose between the menu sections by pressing the or buttons to move the highlight along the section bar. You choose an option within the section shown by pressing the button to move the highlight bar through the option list. Some of the selections available from different menu sections are for advanced use of the Plaza HD•S2. We recommended that you take the time to read this section carefully before you make any changes.

GENERAL MENU SECTION

Highlight the option you want to alter using the and buttons. When you have finished making the changes you want, leave the You can lock a channel to prevent it being selected for viewing menu system by pressing BACK or EXIT. without first entering the lock PIN. Highlight the channel and press the yellow button to lock it. A padlock symbol is shown next to all locked channels in the channel list.

HINT: If you want to unlock a channel that you have locked before, highlight it in the channel list and press the yellow button. You will need to enter the PIN to complete the process.

25 SUBTITLES INFORMATION Press OK to switch on subtitles for all channels that provide them. Press OK to show technical information about your receiver, including Switch subtitles off by pressing OK again. the Helpline phone number, signal strength and quality readings.

SUBTITLE LANGUAGE HINT: We recommend that you have this screen displayed The Freesat channels can broadcast with subtitles available in a on your TV if you need to phone the Plaza HD•S2 helpline. number of languages. The Plaza HD•S2 is set to English subtitles, but you can change this setting by pressing OK to show the subtitle language menu.

Use and to highlight the language you want for subtitles (if available) and press OK.

PICTURE MENU SECTION Highlight the option you want to alter using the and buttons. When you have finished making the changes you want, leave the menu system by pressing BACK or EXIT.

26 HINT: This menu option has the same effect as the MODE button.

HDMI RESOLUTION

Press OK to show the HDMI resolution menu and use the and buttons to choose the correct resolution for your TV. You should set the HDMI resolution to the highest that your television can display (see your television’s manual). If in doubt, set the resolution to 720p. Press OK to confirm your choice.

HINT: If you set an incompatible resolution or move your receiver to a different TV that doesn’t support the active SCREEN TYPE resolution, ensure the receiver is turned on and then press Press OK to show the screen type menu and use the and and hold the MODE button for 10 seconds. The resolution buttons to choose between 16:9 Widescreen and 4:3 Traditional. will be changed to 720p, which is supported by all HD Press OK to confirm your choice. televisions.

SCART MODE HINT: This setting overrides the screen type you selected when you first installed the receiver. Press OK to show the SCART mode menu and use the and buttons to choose between Composite and RGB for the correct output for a television connected to the receiver’s TV SCART DISPLAY MODE output. Press OK to confirm your choice.

Press OK to show the display mode menu and use the and buttons to choose between Auto, Centre Cut-Out, and HINT: The RGB setting will usually produce the best quality Letterbox, if the screen type is set to 4:3 Traditional, or between SCART picture but a few televisions cannot accept this Auto, Widescreen, and Pillarbox if the screen type is set to 16:9 signal (see your TV manual). This setting has no effect on Widescreen. Press OK to confirm your choice. See Advanced Use - the receiver’s HDMI output. Display Mode (page 22) for more information. 27 SOUND MENU SECTION DOLBY DIGITAL Highlight the option you want to alter using the and buttons. Press OK to switch on the Dolby Digital surround sound output When you have finished making the changes you want, leave the from the S/PDIF and HDMI sockets, for all programmes that menu system by pressing BACK or EXIT. provide it (channels with Dolby Digital sound available show the symbol in the information bar). Switch off Dolby Digital by pressing OK again. Only turn this on if you have connected your Plaza HD•S2 to a product that supports Dolby Digital.

Warning! If you switch Dolby Digital on and your TV or sound system does not support it, you will not hear any audio on HD channels.

HINT: The volume level of Dolby Digital is fixed, therefore you cannot use the volume control buttons when you watch programming with Dolby Digital.

LIP-SYNC DELAY If you are using the S/PDIF output with a sound system and find AUDIO LANGUAGE the sound and picture falling out of sync, you can delay the sound The Freesat channels can broadcast in a number of languages. The output by a small amount to compensate. Plaza HD•S2 is set to the English, but you can change this setting by pressing OK to show the audio language menu. Press OK to show the lip-sync delay menu on top of the normal TV picture, then use the and buttons to adjust the amount of Use and to move the orange highlight bar to the language audio delay in 10ms steps from 0-250ms. Press OK to confirm you want for the soundtrack and press OK. your choice and return to the sound menu.

28 BALANCE SLEEP TIMER

You can alter the volume balance between the left and right stereo Press OK to show the sleep timer menu and use the and buttons sound outputs by pressing OK to show the balance menu and using to choose a time up to 90 minutes after which the receiver automatically the or buttons to alter the balance in favour of the right side switches itself to standby. Press OK to confirm your choice. (positive) or left side (negative). Press OK to confirm the setting. AUTO TURN ON TIME MENU SECTION You can set the Plaza HD•S2 to switch on automatically at a Highlight the option you want to alter using the and buttons. particular time. Press OK to show the auto turn on menu and use When you have finished making the changes you want, leave the the or buttons to set the timer to turn the receiver on once, menu system by pressing BACK or EXIT. every day, each week, on weekdays, weekends, or particular days of the week. Then use the and buttons, along with the , and the number buttons to set the switch-on time, the channel source (freesat TV or radio), the channel number and the sound volume. Press OK to confirm.

AUTO TURN OFF You can set the receiver to switch off automatically at a particular time. Press OK to show the auto turn off menu and use the or buttons to set the timer to turn the receiver off once, every day, each week, on weekdays, weekends, or particular days of the week. Then use the and buttons, along with the , and number buttons to set the switch-off time. Press OK to confirm.

AUTO STANDBY To conserve power, the Plaza HD•S2 will switch to standby after three hours if no buttons are pressed on the remote control or front panel. The Auto standby function is normally turned on, and can be turn off by pressing the OK button. 29 TIME ZONE FREESAT INSTALLATION

If the Plaza HD•S2 is used outside of the UK, you should set Press OK to retune all the Freesat channels. If you retune Freesat, the time zone so the local time is correctly displayed. Press OK you will lose all channels from the favourites lists (but not the to show the time zone menu and use the and buttons to lists’ names), remove any channel locks you have set, and restore highlight the correct European time zone for your location. Press channels deleted from the channel list. OK to confirm your choice. ADD NON-FREESAT CHANNELS SYSTEM MENU SECTION See the Non-Freesat Channels section of this guide (page 35) for Highlight the option you want to alter using the and buttons. full details of how you can add and watch non-Freesat channels. When you have finished making the changes you want, leave the menu system by pressing BACK or EXIT. NETWORK CONFIGURATION See the On Demand TV section of this guide (page 32) for full details of how you can connect to and watch online services.

PARENTAL GUIDANCE

Press OK to turn on or off the parental guidance lock. This prevents watching any programme broadcast with a parental guidance warning, or displaying the system menu, without first entering the lock PIN.

HIDE ADULT CHANNELS

Press OK to hide or show the adult Freesat channels. If you set the Plaza HD•S2 to hide adult channels, all adult genre channels are removed from the programme guide and the channel list, and they cannot be selected by putting in the channel number or by skipping through the channels with the P and P buttons.

30 SOFTWARE UPDATE VIA USB

HINT: To prevent other users resetting this function and Press OK to load new software for the receiver from a storage showing the adult channels, we recommend that if you hide device connected to the USB socket on the back of the receiver. the adult channels, you also turn on the parental guidance lock. The device must be formatted with the FAT32 file system. Please refer to the documentation from your operating system for more information.

LOCK ONLINE CONTENT We recommended you use a USB stick as many Hard Disks require more power than a single USB socket can provide. If using such a Press OK to turn on or off the online content lock that prevents hard disk, please ensure it has an external power supply. any online services being viewed without first entering the lock PIN. See the On Demand TV section of this guide (page 32) for RESTORE FACTORY DEFAULT more details of how you can connect to and watch online services. Press OK to revert all the receiver settings to what they were when SET LOCK PIN you first got your receiver and to start the installation procedure described in the Preparation section of this guide. Press OK to show the set lock PIN menu. Change the PIN used by first entering the current PIN and then entering and confirming You must enter the lock PIN, and then confirm in another your choice of new PIN. menu, to start the process because it will delete all channels, favourite channels, favourite channel list names, and the receiver SOFTWARE UPDATE VIA OAD configuration.

Press OK to turn on or off the automatic software update.

OAD SOFTWARE MANUAL SCAN

Press OK to immediately search for new software to download.

31 On Demand TV

This section explains how to set up the Plaza HD•S2 to watch On Demand TV services, such as the BBC iPlayer and ITV Player catch-up services. You must have a 5 broadband Internet connection in your home to watch on demand TV.

HINT: You can read the latest information about Freesat online TV services on the Freesat information page on channel 999.

SETTING UP FOR ON DEMAND TV If your broadband modem/router is not compatible with DHCP (Dynamic Host Configuration Protocol), you will need to set Ensure the ETHERNET socket at the back of the Plaza HD•S2 is the addresses manually. Use the or buttons to change the connected to your router or hub. See the Connecting your receiver configuration to “Static” and for each of the addresses in turn (IP section (page 10) for more information. Address, Subnet Mask, Router Address, and DNS Address) press to highlight the address and then the red button to edit the address.

HINT: If the receiver has made a connection with your Highlight each of the four “octets” that is to be changed, enter modem or home network, one or both of the small green the number required using the number buttons, and press OK and orange lights immediately above the RJ-45 socket will to confirm that address. When all four addresses have been set light and/or flicker. correctly, press OK to set the configuration and return to the system menu page.

Press the MENU button on the remote control and then press to display the System menu. You should check that the Network HINT: Consult the manual or supplier for your modem/ Configuration menu option shows “DHCP” to automatically router or network for help choosing the correct addresses. configure the network connection. 32 WATCHING ON DEMAND TV You can check that the receiver has successfully connected to the Internet from the technical information page. Press to display You can switch to On Demand TV either through the interactive the General menu (or, if you are no longer on the System menu services on a channel providing online TV, or through an online page, first press MENU) and use the button to highlight the channel chosen by number or using the channel list or programme “Information” option, then press OK. guide.

If the IP address item shows a number in four sections separated by dots, then the receiver is connected to your local network. If online HINT: The online TV channels are numbered from 900 and services still do not work, you should check your router’s connection are in the On Demand section of the programme guide to the internet. If “Not Connected” is shown, you should carefully check the broadband connection and the Network Configuration. When you switch to an On Demand TV channel, it may take a few seconds longer to show the picture than a Freesat satellite channel. You will then need to progress through a series of menus, using the number buttons, the coloured buttons, , , and , and the OK button, to find and start the programme you want to watch. You go through these menus in a different way depending on the online broadcaster. 33 WATCHING ON DEMAND TV (continued)

34 Non-Freesat Channels or by allowing the Plaza HD•S2 to scan all the transponders for non-Freesat channels. Choose between a manual scan or an This section explains how to set up your Plaza HD•S2 automatic scan by pressing the or buttons. receiver to receive channels that are not included with Freesat. As well as receiving the many Freesat If you choose a manual scan, you should enter the frequency and 6 channels, the Plaza HD•S2 can also be used to watch symbol rate of the transponder to scan, using the number buttons, other channels, as long as they are broadcast from the and its polarization by using the or buttons. You can move same satellites as Freesat and are free. between the three items using the and buttons. When you have entered the tuning information, press OK to start the scan. TUNING IN NON-FREESAT CHANNELS Go to the Add Non-Freesat Channels menu by pressing MENU, then to display the system menu, and to highlight the option to add non-Freesat channels, then press OK.

HINT: The tuning information for non-Freesat channels may be printed in specialist magazines, or given on a specific channel’s website.

You can add non-Freesat channels either by manually entering the tuning details for an individual transponder (a group of channels) If you choose an automatic scan, just press OK to start the scan. 35 TUNING IN NON-FREESAT CHANNELS (continued) bar displays the Manhattan logo instead of the Freesat logo. The Plaza HD•S2 will take a few seconds to complete a Manual Scan and about five minutes to finish an Auto Scan. While it is scanning, the receiver displays the number of TV and radio channels found so far. When it is finished, the receiver will display a list of all the channels found.

While watching a non-Freesat channel, you can step through the other non-Freesat channels by pressing the P or P buttons.

You can also switch directly to the channel you want using the number buttons. All the non-Freesat channel numbers have four digits. If you enter only the three digits of a Freesat channel, the You can choose to watch a non-Freesat channel from this list by receiver will switch to that Freesat channel. moving the orange bar using the and buttons to highlight the channel you want and pressing OK, or return to watching TV by pressing BACK or EXIT. HINT: Non-Freesat TV channels are stored from channel number 3001 and non-Freesat radio channels from 4001. WATCHING NON-FREESAT CHANNELS Non-Freesat channels and Freesat channels are stored separately While watching a Freesat channel you cannot enter a four-digit in the receiver but you can switch between them quite easily. channel number to switch to a non-Freesat channel, but you can When you are watching a non-Freesat channel, the information press the button to switch to the channel you last watched, 36 whether it was a freesat or non-freesat channel.

You can browse through the non-Freesat channels and programmes in the same way as you browse the Freesat channels. Press or or to display the information bar and then press the or buttons to see what is showing at the moment on any of the other non-Freesat channels, and to see the programmes on next.

HINT: The programme guide does not display non-Freesat channels.

When you have some non-Freesat channels stored, the channel If you put your favourite Freesat channels and your favourite non- list displays both Freesat and non-Freesat channels. If you have Freesat channels in the same favourites list, you can switch from created any favourites lists, they will also be displayed. Go to the one to the other freely and easily. channel list by pressing the LIST button.

Now pressing or will take you through the channel lists available:

• Freesat TV Channels • Freesat Radio Channels • non-Freesat TV Channels • non-Freesat Radio Channels • favourites lists (if created)

You can use the same channel list functions for any of the lists, so you can search the non-Freesat channels for a word, lock or delete a channel, or add it to your favourites lists. 37 Appendix A – Safety VENTILATION POWER Slots and openings in the receiver’s cover are for ventilation. Ensure Your receiver requires a 100V to 240V AC ~ 50Hz mains supply and is a minimum distance of 5cm around the apparatus for sufficient fitted with a moulded plug. The mains plug is used as the disconnect ventilation. Ensure the ventilation is not impeded by covering the device and shall remain readily operable. The USB port maximum load is ventilation opening with items such as newspapers, table-cloths, 500mA under normal operation. curtains, etc. Failure to follow these instructions could lead to the receiver overheating. CABLES CLEANING Make sure all cables are positioned so they are not likely to be walked on, crushed or damaged by things placed on or against Unplug the receiver before you clean it with a lightly dampened them. Pay particular attention to the power cable where it goes cloth. Do not use liquid or aerosol cleaners. into the socket and where it comes out of the receiver. Do not connect or adjust cables to the receiver when it is plugged in. LIGHTNING

TEMPERATURE AND MOISTURE If there is a storm or lightning, unplug the receiver.

Use the apparatus only in moderate climates (not in tropical SERVICING climates). Do not allow it to get wet as this is dangerous. Do not expose the apparatus to dripping or splashing. Do not place Make sure that anyone who services your receiver is qualified to do objects filled with liquids, such as vases, on the apparatus. so. Do not remove the cover yourself – you could get an electric shock.

HEAT AND FLAMES REPLACEMENT PARTS

Do not place the apparatus near to naked flames or sources of If your receiver needs repairing, make sure the person carrying out intense heat, such as an electric fire. Do not place naked flame the repair uses parts which are specified by us or which have the sources, such as lighted candles on the apparatus. Batteries shall same specifications as the original part. Other parts may cause a not be exposed to excessive heat such as sunshine, fire or the like. fire, electric shock or other dangers.

38 ELECTRICAL SAFETY The wire which is coloured brown or red must be connected to the Your receiver requires a 100V to 240V AC ~ 50/60Hz mains supply terminal which is marked with the letter L or coloured Red. No and is fitted with a moulded plug. If the plug breaks or becomes connection is to be made to the Earth terminal of the plug as this damaged do not use it. If you change the fuse in the plug ensure product is double insulated. you refit the fuse cover. If the plug requires replacement please follow these instructions. The wires in the mains lead are coloured If a 13 Amp (BS1363) Plug is used, fit an ASTA approved (BS1362) in accordance with the following code: 3 Amp fuse only. Your product is fitted with a moulded plug. If it requires replacement please cut off and dispose of safely, then BLUE - Neutral rewire as shown opposite. BROWN - Live NO CONNECTION PROTECTING THE ENVIRONMENT (EARTH)

FUSE

BLUE If you one day find that your receiver or remote control needs (NEUTRAL) replacing, or are of no further use to you, do not throw them BROWN (LIVE) out with your household waste. Under the Waste Electrical and Electronic Equipment (WEEE) regulations, your local council must provide a suitable recycling centre. OUTER CABLE SLEEVE GRIP

As the colours in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Do not throw batteries in the bin or on a fire. Make sure that you The wire which is coloured blue or black must be connected to dispose of batteries safely at a local recycling centre. You can also the terminal which is marked with the letter N or coloured Black. recycle batteries at many supermarkets. 39 Appendix B – Troubleshooting

PROBLEM POSSIBLE CAUSE WHAT TO DO Power light off Power supply cable disconnected. Check the power supply cable. Check the mains adapter is plugged in and mains Receiver not switched on. socket is turned on. Turn on receiver. No set up screen Check HDMI/SCART cable connection HDMI/SCART cable disconnected. to receiver and television. Television not switched to HDMI/SCART input. Select television’s HDMI/SCART input. Cable from the satellite dish Check the cable connections at receiver and dish. Signal lock failed disconnected. Consult your installer if necessary. Dish in the wrong position. Reinstall the dish. Consult your installer if necessary. Postcode tables are not being transmitted. Use green Not accepting postcode Broadcast error. Default Channels button to activate default tuning. Cable from the satellite dish Check the cable connections at receiver and dish. disconnected. Consult your installer if necessary. ‘No signal’ message Dish damaged or in the wrong position. Check the dish. Consult your installer if necessary. Read the warning box on page 13 & check our Freesat satellite failure. website at www.manhattan-tv.com Check HDMI/SCART cable connections HDMI/SCART cable disconnected. No picture or sound at receiver and television. Television not switched to HDMI/SCART input. Select television’s HDMI/SCART input. Selected an incompatible HDMI Whilst the receiver is on, press and hold No picture via HDMI resolution – many TVs don’t support the MODE button for 10 seconds and the 1080p or 1080i, but only 720p. resolution will be changed to 720p.

40 PROBLEM POSSIBLE CAUSE WHAT TO DO Mismatched screen format or that is how the Using the Picture menu, choose the correct screen Full picture not visible programme is being broadcast. type and display mode to suit your TV (see page 27). Tuned to an SD channel. Tune to an HD channel. TV picture not HD TV not capable of HD. Connect the receiver to an HD-Ready TV. TV connected by SCART. Connect the TV with the HDMI lead. Receiver in standby. Switch on the receiver. Remote control not aimed at the Aim the remote control at the receiver. No response with remote receiver correctly. control Remote sensor on the front of the receiver is Check for obstructions in front of the receiver. obstructed. Receiver switches off after Auto Standby is on. Turn off the Auto Standby in the Time menu. 3 Hrs Wrong channel number used. Choose the channel from Channel List. Cannot view a channel Enter your PIN. If you have forgotten it, Channel locked. please contact us for the Master PIN. No information for a channel Information on the channel not downloaded. Wait for the download. in the programme guide You are on a non-Freesat channel. Select a Freesat channel. No digital text or interactive Services not available on chosen channel. Switch to a channel broadcasting interactive services. services BBC iPlayer or ITV Player Check broadband connection and network No connection to Internet. won’t load configuration in system menu. Can’t access System menu You have forgotten your PIN. Please contact us for the Master PIN.

41 Appendix C – Specifications

Standard DVB-S/S2 Input frequency 950~2150MHz Tuner Input connector F type, female 75 ohm LNB supply 13V/18V (maximum 350mA), short-circuit protected Digital signal input level -65dBm to -20dBm HDMI output Resolution 576i / 576p / 720p / 1080i /1080p Video SCART output TV (CVBS/RGB) Aspect ratio 16:9 Widescreen & 4:3 Traditional TV & VCR SCART output Audio left and right Audio Optical S/PDIF output Dolby Digital, Dolby Digital + & PCM USB Host 2.0 (5V@500mA max). For software upgrade only. Internet Connectivity Ethernet RJ-45 10/100 Base-T Power Mains input voltage 100-240V AC~ 50/60Hz Requirements Power consumption Max 20W (LNB with 350mA) Dimensions Width x Depth x Height 210mm x 137mm x 41mm Weight Receiver only 550 grams

42 Notes

43 HELPLINE: 020 8450 0005 ONLINE: www.manhattan-tv.com

Find out more about Freesat at www.freesat.co.uk

Follow Freesat on www.twitter.com/freesat_TV

Like Freesat on www.facebook.com/freesat

v3.4