Satcom Antenna Dm C175 Series Dual Mode Batwing

Total Page：16

File Type：pdf, Size：1020Kb

SATCOM ANTENNA DM C175 SERIES DUAL MODE BATWING UHF ANTENNA The DM C175 Dual Mode Batwing antenna represents the latest in airborne UHF Satcom antenna technology. Extremely lightweight and Mach 0.88 capable, the antenna provides for operation over the complete hemisphere with two separate antennas housed in one MIL-E-5400 qualified structure. A low angle monopole antenna provides coverage from 0 degrees to +40 degrees above the horizon. A separate crossed dipole antenna provides circularly polarized high angle coverage in the +40 degree to 90 degree (zenith) elevation sector. The high angle mode’s hybrid coupler and 50 ohm load termination are housed internally to the unit thereby greatly simplifying installation and reducing customer supplied system accessories to a coaxial switch and interconnecting cables. Ideally suited for rotary or fixed wing aircraft due to its lightweight, low drag profile, and ease of installation; the DM C175 is also suitable for shelter or shipboard applications. Several versions are available, including the most recent version, the DM C175-5, which features a strengthened housing for high vibration environments. SPECIFICATIONS Frequency Range Low Angle 225 – 400 MHz High Angle 240 – 400 MHz -5 Low Angle 225 – 400 MHz High Angle 243 – 318 MHz VSWR Low Angle 2.5:1 High Angle 1.5:1 Gain Low Angle Average within 2 dB of a quarter-wave stub ELECTRICAL High Angle +6.0 dBic typical Power 200 watts average Polarization Low Angle Vertical High Angle RHCP Connectors DM C175-1 Type N female; J8-low angle DM C175-5 J9 high angle Size See back of page Weight DM C175-1 7.5 lbs DM C175-5 8.0 lbs Qualification MIL-E-5400 class 2 MECHANICAL Drag 3.5 lbs at 45,000 ft, Mach 0.78 Color DM C175-X-1 White DM C175-X-2 Black 1000-155 (M59) Specifications subject to change without notice. Antenna Products EDO and Technologies GLOBAL TECHNOLOGY REACH SATCOM ANTENNA TABLE 1 CONNECTOR DM C175 SERIES DUAL MODE REF DES FUNCTION J8 LOW ANGLE MODE BATWING UHF ANTENNA J9 HIGH ANGLE MODE OUTLINE DIMENSIONS Inches (Centimeters) BUSHING 15.9 MAX 13.0 MAX 0.203 DIA (330.2) (5.15) (403.8) 0.34 (8.6) 8 PL 0.25 DIA (6.3) 6.20 ± 0.15 FWD (208.3) 0.93 MAX (23.6) 0.40 REF 1.75 ± 0.10 (10.2) 12.9 4.6 (44.5) 8 PL (327.7) (116.8) 3.3 (83.8) 4.1 1.1 0.203 DIA (104.1) 27.9) (5.16) 8 PL 2.594 1.718 (65.89) (43.64) 1.063 2.125 C 1.297 0.859 (32.94) (21.82) ABRASION 2.587 RESISTANT 5.125 (65.07) TAPE (130.17) 3 PL 7.688 2.56 (195.28) (65.0) Electronic Systems Group Antenna Products 455 Commack Road • Deer Park, NY 11729-4591 EDO and Technologies 631-595-6000 Fax 631-595-6180 GLOBAL TECHNOLOGY REACH http://www.edocorp.com.

Copy Link

Recommended publications

Antenna Systems Demonstrator Volume 1 Instructor's Manual ASD512-1
Antenna Systems Demonstrator - Volume 1 Instructor's Manual ASD512-1 Antenna Systems Demonstrator Volume 1 Instructor’s Manual ASD512-1 Feedback Feedback Instruments Ltd, Park Road, Crowborough, E. Sussex, TN6 2QR, UK. Telephone: +44 (0) 1892 653322, Fax: +44 (0) 1892 663719. email: [email protected] website: http://www.fbk.com Manual: 512-1 Ed C 082000 Printed in England by Fl Ltd, Crowborough Feedback Part No. 1160–005121 Notes Antenna Systems Demonstrator ASD512-1 PREFACE THE HEALTH AND SAFETY AT WORK ACT 1974 We are required under the Health and Safety at Work Act 1974, to make available to users of this equipment certain information regarding its safe use. The equipment, when used in normal or prescribed applications within the parameters set for its mechanical and electrical performance, should not cause any danger or hazard to health or safety if normal engineering practices are observed and they are used in accordance with the instructions supplied. If, in specific cases, circumstances exist in which a potential hazard may be brought about by careless or improper use, these will be pointed out and the necessary precautions emphasised. While we provide the fullest possible user information relating to the proper use of this equipment, if there is any doubt whatsoever about any aspect, the user should contact the Product Safety Officer at Feedback Instruments Limited, Crowborough. This equipment should not be used by inexperienced users unless they are under supervision. We are required by European Directives to indicate on our equipment panels certain areas and warnings that require attention by the user.
[Show full text]
Elliptical Polarization Is Your Best Dollar Value Summary the Good Old Days of VHF in the Analog World VHF Worked Well in the Analog World
Bill Ammons The Spectrum Repack: Broadcasters Clinic 2016 Is there a move to VHF in your future? Maybe a move to VHF in your future? A quick look back at the analog era model, what worked, what did not How big is that VHF antenna? Why one’s VHF reception failed after the DTV conversion, and how to fix it How much Effective Radiated Power, (ERP), is now reaching your viewers New challenges in getting through to your viewers Elliptical polarization is your best dollar value Summary The good old days of VHF in the analog world VHF worked well in the analog world. The picture was not perfect on the outer edges of the market…but it worked. Ghosting was common, something the digital world has solved. Outdoor antennas were the norm; you could walk into Sears, and come out with one a few minutes later. “Rabbit-Ears” antennas were sold everywhere. A once-common sight was the Radio Shack VU-90 Antenna. (I worked for Radio Shack for a few years, and sold tons of those “magical” antennas.) On the TV station side of life most stations on high band VHF, had a 12-bay batwing antenna, with a 30+ kW transmitter. For low band a 4 or 6 bay batwing got stations up to the maximum power of 100 kW. This was beach front property at the time. VU-90 The most important thing about the Analog TV Era Grandma knew how to position the rabbit ears antenna on top of her TV. This was to get the best picture to watch the Lawrence Welk show…he was on channel 8.
[Show full text]
American Journal of Engineering Research (AJER) 2015 3D Design & Simulation of Printed Dipole Antenna
American Journal of Engineering Research (AJER) 2015 American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN : 2320-0936 Volume-4, Issue-9, pp-76-80 www.ajer.org Research Paper Open Access 3D Design & Simulation of Printed Dipole Antenna Protap Mollick1, Amitabh Halder2, Mohammad Forhad Hossain3, Anup Kumar Sarker4 1(CSE, American International University-Bangladesh, Bangladesh) 2, 3, 4 (EEE, American International University-Bangladesh, Bangladesh) ABSTRACT: This paper represents design of a printed dipole antenna with both lambda by 2 & half dipole. In this research paper the impedance increases with combined design on the FR-4 substrate and ground plane. The main feature of printed dipole antenna is there is a feeder between the radiant elements. Average impedance about 73 ohm, which is very large form other antenna. For vertical earth position impedance decreases about 36 ohm. Applied AC voltage forwarding bias dipole antenna gains are high but when reverse bias condition gains are low. Between ropes to station there is need extra insulator that abate high impedance current flow to dipole antenna. Feed lines are approximately 75 ohm and the main length between two poles are 143 meter. The radius of two pole line is very thin it’s about 2.06 meter. Transmission lines are added in the last portion of feed lines, which situated apposite of two poles. Designs are simulated by hfss and solving equations are done my matlab. Keywords–Rabbit ears, folded dipole, omnidirectional, azimuthal direction, 3db gain. I. INTRODUCTION In radio and telecommunications a dipole antenna or doublet is the simplest and most widely used class of antenna.
[Show full text]
BBG) Operations and Stations Division (T/EOS) Monthly Reports, 2011-2014
Description of document: Broadcasting Board of Governors (BBG) Operations and Stations Division (T/EOS) Monthly Reports, 2011-2014 Request date: 01-March-2014 Released date: 18-July-2014 Posted date: 20-October-2014 Source of document: BBG FOIA Office Room 3349 330 Independence Ave. SW Washington, D.C. 20237 Fax: (202) 203-4585 The governmentattic.org web site (“the site”) is noncommercial and free to the public. The site and materials made available on the site, such as this file, are for reference only. The governmentattic.org web site and its principals have made every effort to make this information as complete and as accurate as possible, however, there may be mistakes and omissions, both typographical and in content. The governmentattic.org web site and its principals shall have neither liability nor responsibility to any person or entity with respect to any loss or damage caused, or alleged to have been caused, directly or indirectly, by the information provided on the governmentattic.org web site or in this file. The public records published on the site were obtained from government agencies using proper legal channels. Each document is identified as to the source. Any concerns about the contents of the site should be directed to the agency originating the document in question. GovernmentAttic.org is not responsible for the contents of documents published on the website. Broadcasting 330 Independence Ave.SW T 202.203.4550 Board of Cohen Building, Room 3349 F 202.203.4585 Governors Washington, DC 20237 Office of the General Counsel Freedom ofInformation and Privacy Act Office July 18, 2014 RE: Request Pursuant to the Freedom of Information Act - FOIA #14-023 This letter is in response to your Freedom of Information Act (FOIA) request to the Broadcasting Board of Governors (BBG), dated March 1, 2014.
[Show full text]
Space & Electronic Warfare Lexicon
1 Space & Electronic Warfare Lexicon Terms 2 Space & Electronic Warfare Lexicon Terms # - A 3 PLUS 3 - A National Missile Defense System using satellites and ground-based radars deployed close to the regions from which threats are likely. The space-based system would detect the exhaust plume from the burning rocket motor of an attacking missile. Forward-based radars and infrared-detecting satellites would resolve smaller objects to try to distinguish warheads from clutter and decoys. Based on that data, the ground-based interceptor - a hit-to-kill weapon - would fly toward an approximate intercept point, receiving course corrections along the way from the battle management system based on more up-to-date tracking data. As the interceptor neared the target its own sensors would guide it to the impact point. See also BALLISTIC MISSILE DEFENSE (BMD.) 3D-iD - A Local Positioning System (LPS) that is capable of determining the 3-D location of items (and persons) within a 3-dimensional indoor, or otherwise bounded, space. The system consists of inexpensive physical devices, called "tags" associated with people or assets to be tracked, and an infrastructure for tracking the location of each tag. NOTE: Related technology applications include EAS, EHAM, GPS, IRID, and RFID. 4GL - See FOURTH GENERATION LANGUAGE 5GL - See FIFTH GENERATION LANGUAGE A-POLE - The distance between a missile-firing platform and its target at the instant the missile becomes autonomous. Contrast with F-POLE. ABSORPTION - (RF propagation) The irreversible conversion of the energy of an electromagnetic WAVE into another form of energy as a result of its interaction with matter.
[Show full text]
Crossed Dipole Antennas: a Review
See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/282776048 Crossed Dipole Antennas: A review Article in IEEE Antennas and Propagation Magazine · October 2015 DOI: 10.1109/MAP.2015.2470680 CITATIONS READS 32 7,482 3 authors: Son Xuat Ta Ikmo Park VNU University of Science Ajou University 78 PUBLICATIONS 642 CITATIONS 187 PUBLICATIONS 2,123 CITATIONS SEE PROFILE SEE PROFILE R.W. Ziolkowski The University of Arizona 562 PUBLICATIONS 12,913 CITATIONS SEE PROFILE Some of the authors of this publication are also working on these related projects: Artificial Metamaterials View project Metasurface-Inspired Antennas View project All content following this page was uploaded by Son Xuat Ta on 16 November 2015. The user has requested enhancement of the downloaded file. Son Xuat Ta, Ikmo Park, and Richard W. Ziolkowski Crossed Dipole Antennas A review. rossed dipole antennas have been THE HISTORY OF CROSSED widely developed for current and DIPOLE ANTENNAS future wireless communication sys- The crossed dipole is a common type of mod- tems. They can generate isotropic, ern antenna with an radio frequency (RF)- Comnidirectional, dual-polarized (DP), and to millimeter-wave frequency range. The circularly polarized (CP) radiation. More- crossed dipole antenna has a fairly rich and over, by incorporating a variety of primary interesting history that started in the 1930s. radiation elements, they are suitable for The first crossed dipole antenna was devel- single-band, multiband, and wideband oper- oped under the name “turnstile antenna” ations. This article presents a review of the by Brown [1]. In the 1940s, “superturnstile” designs, characteristics, and applications antennas [2]–[4] were developed for a broader of crossed dipole antennas along with the impedance bandwidth in comparison with recent developments of single-feed CP con- the original design.
[Show full text]
July 1990 $2.50 53.50 Canada
JULY 1990 $2.50 53.50 CANADA in this issue: ..r .w . r. ! r..olli I. ir .. ..",..2' rrelelree4 .KM. reew. .. '.e w , igee reeleimem dele .,. w .. `-'"a . í,,i.. re are 1.wwT.+r.w. + . s-i..r..r.M.4! 1 a s 1999.800.00 999 aa .Ï:l ---x,a..u5z-_....-. THE BEST OF BOTH WORLDS. The pacesetting IC -R9000 truly reflects operator -entered notes and function menus. Professional Quaky Throughout. The revolutionary ICOM's long-term commitment to excellence. Features a subdisplay area for printed modes IC -R9000 features W Shift, IF Notch, a fully This single -cabinet receiver covers both local such as RTTY, SITOR and PACKET adjustable noise blanker, and more. Ile Direct area VHF/UHF and worldwide MFt}IF (external T.U. required). Digital Synthesizer assures the widest dynamic bands. It's a natural first choice for elaborate Spectrum Scope. Indicates all signal activities range, lowest noise and rapid scanning. Designed communications centers, professional service within a +/-25, 50 or 100KHz range of your for dependable long-term performance. Backed facilities and serious home setups alike. Test - tuned frequency. It's ideal for spotting by a full one-year warranty at any one of tune ICOM's IC -R9000 and experience a random signals that pass unnoticed with ICOM's four North American Service Centers! totally new dimension in top -of -the -line ordinary monitoring receivers. receiver performance! 1000 Multi-Function Meanies. Store Complete Communications Receiver. Covers frequencies, modes, and tuning steps. 100KHz to 1999.8MHz, all modes, all O Includes an editor for moving contents frequencies! The general coverage IC -R9000 between memories, plus an on -screen receiver uses 11 separate bandpass filters in notepad for all memory locations.
[Show full text]
Antennas and Wave Propagation
Antennas and Wave Propagation By: Harish, A.R.; Sachidananda, M. Oxford University Press © 2007 Oxford University Press ISBN: 978‐0‐19‐568666‐1 Preface Antennas are a key component of all types of wireless communication—be it the television sets in our homes, the FM radios in our automobiles, or the mobile phones which have become an almost integral part of most people’s daily lives. All these devices require an antenna to function. In fact, it was an antenna which led Arno Penzias and Robert Wilson to their Nobel Prize winning discovery of cosmic background radiation. The study of antennas and their field patterns is an important aspect of understanding many applications of wireless transmission technology. Antennas vary widely in their shapes, sizes, and radiation characteristics. Depending on the usage requirements, an antenna can be a single piece of wire, a huge reflective disc, or a complex array of electrical and electronic components. The analysis of antennas is almost invariably concomitant with the study of the basic concepts of the propagation of electromagnetic waves through various propagation media and the discontinuities encoun- tered in the path of propagation. About the Book Evolved from the lecture notes of courses taught by the authors at the Indian Institute of Technology Kanpur over several years, Antennas and Wave Propagation is primarily meant to fulfil the requirements of a single-semester undergraduate course on antennas and propagation theory. It is assumed that the reader has already gone through a basic course on electromagnetics and is familiar with Maxwell’s equations, plane waves, reflection and refraction phenomena, transmission lines, and waveguides.
[Show full text]
Modern Antenna Design
MODERN ANTENNA DESIGN Second Edition THOMAS A. MILLIGAN IEEE PRESS A JOHN WILEY & SONS, INC., PUBLICATION MODERN ANTENNA DESIGN MODERN ANTENNA DESIGN Second Edition THOMAS A. MILLIGAN IEEE PRESS A JOHN WILEY & SONS, INC., PUBLICATION Copyright 2005 by John Wiley & Sons, Inc. All rights reserved. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400, fax 978-646-8600, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and speciﬁcally disclaim any implied warranties of merchantability or ﬁtness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate.
[Show full text]
Near East University Docs
NEAR EAST UNIVERSITY Faculty of ;Engineering Department of Electrical and Electronic Englneering TV AND fM TRANSMITT1ING ANTENNAS Graduation Project EE - 400 Student: ERGUN OZDEMi'.R (961187) Supervisor: Prof, Dr SAMEER IKHDAIR Lefkosa 20()3( ' ACKNOWLEDGEMENTS It is my pleasure to take this opportunity to express my greatest gratitude to many individuals who have given me a lot of supports during my four-year Undergraduate program in the Near East University. Without them, my Graduation Project would not have been successfully completed on time. First of all, I would like to express my thanks to my supervisor Prof Dr. Sameer Ikhdair for supervising my project. Under the guidance of him I successfully overcome many difficulties and I learned a lot about antennas. In each discussion, he used to explain the problems and answer my questions. He always helped me a lot and l felt remarkable progress during his supervision. On this note I would like to gratitude to the Near East University for thy awareness that they granted to us. I would also like to thank my teachers who supported me and taught me the true meaning of determination especially Prof Dr. Fakhreddin Mamedov, Mr. Ozgur Ozerdem, Assoc. Prof Dr. Kadri Buruncuk, I am forever in their gratitude for having the belief in 111e and for not giving up on me. I also want to thank all my friends who supported and helped me all the time. Finally, special thanks for my family, especially my parents for being patientful during my undergraduate degree study. I could never have completed my study without their encouragement and endless support.
[Show full text]
UHF Slot Antennas for the U.S
Company Project Summaries Products o UHF Antennas o VHF Antenna o Filters o Combiners JAMPRO ANTENNAS Oldest U.S. broadcast Antenna Company Since 1954 Jampro has designed, tested and manufactured FM and TV broadcast systems thereby establishing itself as a leader in RF technology throughout the world. From Alabama to Afghanistan; Jampro has over 15,000 active worldwide installations. DTV Ready Since 1993 Commitment to innovative solutions for DTV JAMPRO was the first to develop antennas that would accommodate a DTV signal while conserving tower loading. Only domestic U.S. manufacturer of complete DTV systems Jampro was the first U.S. manufacturer to design, test and build a broadband UHF panel antenna in the United States. A UHF antenna panel, combiner and waveguide ensures total DTV system integrity and quality. First to introduce and develop Circular Polarization to TV One of the largest contributions to the broadcast industry was the development of Circular Polarization for TV when helical Spiral antenna was introduced. Today, many Spiral antennas are in service including WBBM, WLS and the #1 independent station in the United States - KTVK in Phoenix, Arizona. One of the largest number of slot antennas delivered More than 20 years ago, Jampro began designing and producing UHF Slot antennas for the U.S. domestic market. Today, there are hundreds of slot antennas in service around the world. Largest number of batwing antennas produced * Leading the way again in VHF broadcasting was the development and production of the Batwing antenna. Jampro has been manufacturing Batwing antennas longer than any other RF manufacturer in the world.
[Show full text]
Open Mohamed Alkhatib- MS Thesis
The Pennsylvania State University The Graduate School College of Engineering A NEW OPTIMIZED DOUBLE STACKED TURNSTILE ANTENNA DESIGN A Thesis in Electrical Engineering by Mohamed Alkhatib 2016 Mohamed Alkhatib Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science August 2016 ii The thesis of Mohamed Alkhatib was reviewed and approved* by the following: James K. Breakall Professor of Electrical Engineering Thesis Advisor Julio V. Urbina Associate Professor of Electrical Engineering Victor Pasko Professor of Electrical Engineering Graduate Program Coordinator *Signatures are on file in the Graduate School iii ABSTRACT The Turnstile Antenna is one of the many types of antennas that have been developed to be primarily used for omnidirectional very high frequency (VHF) communication. The basic turnstile consists of two horizontal half-wave antennas (half-wave dipoles) mounted at right angles of each other on the same plane. When these dipoles are excited with equal currents that are 90 degrees out of phase, the typical figure-eight radiation pattern of the two diploes are merged into an almost circular radiation pattern. Typically, however, the gain of such an antenna is not very high in the horizontal direction, thus to increase the gain in the horizontal and to eliminate the gain in vertical direction, pairs of the same dipole antenna are stacked vertically and are separated by a distance, thus creating the Stacked Turnstile Antenna. In the original stacked turnstile antenna design, both 50 ohm and 75 ohm cables are used to connect the dipoles, using quarter wave impedance matching transformers, which leads to inaccurate radiation patterns and a higher VSWR.
[Show full text]