DOCSLIB.ORG

Date: 13 June 2016 the New Quattroporte: Restyling and Range

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Date: 13 June 2016 the New Quattroporte: Restyling and Range Date: 13 June 2016 The new Quattroporte: restyling and range strategy for a new product experience After three and a half years of unprecedented success in the international markets, the Quattroporte has undergone a substantial restyling that accentuates its elegance without altering its signature Maserati personality. The restyled Quattroporte, representing the quintessence of Italian sport saloons, will be available from June 2016 and is destined to continue a success story that started in 2013. Since its initial launch, the iconic Maserati flagship model has been delivered to over 24,000 customers in 72 countries. The exterior of the restyled Quattroporte is recognisable with a new bumper design with matte black profile at the front and the matte black extractor at the rear. The front grille is more pointed and imposing, and it introduces new vertical chrome elements that contrast with the deepness of the shark nose effect. Other distinguishing details of the new Quattroporte are the matte black side skirts and the exterior mirrors, which have been slightly restyled to incorporate new technical elements. An electrically adjustable Air Shutter has been fitted in the front grille between the air vents and the engine’s radiator. The Air Shutter provides optimal control of the engine’s fluid temperature and, together with the optimization of the new front and rear bumpers, air conveyor and flat bottom, improves the aerodynamic drag of the car by 10%. The improvements to the interior were introduced to enhance the purity of the model by underlining only the functional parts. This takes place through the clean integration of the new interface elements with the infotainment area and tunnel console. Specifically, the redesigned central dashboard now accommodates a capacitive high resolution 8.4” screen with multi touch function. This area is now characterized by a continuous technical element that integrates the screen, new climate control and new drawer in a single seamless design, emphasizing the pure volume composition typical of the Quattroporte. The central, lower console has also been redesigned and now features a rotary knob for volume and function control, a new lid and phone storage compartment. The stylistic approach to these functional elements permits a minimalist design approach for the centre of the dashboard. The new infotainment system is compatible with both the Apple CarPlay and Android Auto smartphone mirroring functions. A new package of Advanced Driver Assistance Systems is available as an option in the new Quattroporte. It includes Adaptive Cruise Control with Stop&Go, Lane Departure Warning, Forward Collision Warning with Advanced Brake Assist and Automated Emergency Braking. An additional new Surround View Camera is available as an option in combination with the Driver Assistance package. All Quattroporte cars are now equipped with an Air Quality Sensor, a feature that substantially improves comfort levels for the occupants on-board. This system combines an intelligent sensor and a signal analysis system that calculates the external pollution levels and prevents polluted air and toxic gases from entering the cabin. GranLusso and GranSport, two distinct new worlds. Since its beginnings Maserati has represented the perfect blend of luxury and sportiness thanks to its race-bred engineering. With the restyling of the flagship Quattroporte, Maserati launches a new range strategy to offer its highly demanding clientele the additional choice of two unique trim options that emphasize the two key pillars of the brand’s DNA: GranLusso and GranSport. The two highly distinctive trims are available as an upgrade for all Quattroporte V6 powertrain versions (Quattroporte Diesel, Quattroporte, Quattroporte S, Quattroporte S Q4). Both trims will be priced at the same level across the range. The top of the range version, the Quattroporte GTS, which features the twin-turbo V8, will be available exclusively with either the GranLusso or GranSport trims as part of the standard equipment. Each trim level was conceived to meet the needs of customers that seek a distinctive and unique product in the executive saloon segment. GranLusso and GranSport are immediately recognisable thanks to their distinct exterior design and unique interiors. GranLusso trim The GranLusso trim reinterprets the concept of luxury in a race-bred engineered luxury saloon by enhancing the exterior finish and improving in-cabin comfort for driver and passengers. It offers a higher level of luxury using exclusive materials and special features in the finest tradition of Italian craftsmanship. GranLusso is distinctive for a new front lower fascia design with an elegant floating bridge element and a delicate spoiler, detailed by the chrome bumper finish and the body colour bumper profiles. The profile incorporates side skirts, while on the rear the look is even cleaner, characterized by a sculptured retroreflector and a body coloured spoiler; the exterior look is completed by 20” Mercurio rims and black painted brake calipers. In the cabin, the soul of the GranLusso is epitomised by the Ermenegildo Zegna Edition interior that features a patented silk fabric, unique in the industry, on the seats, doors, headliner and sun visors; the seat tailoring details and the label behind the sun visors make this version unique and exclusive. The cabin ambience is further refined thanks to the exclusive open pore Radica wood on the dashboard and the leather steering wheel with wooden inserts. The trim integrates comfort- oriented equipment like the power foot pedals, the electric rear sunblind, the four-zone air conditioning, the heated rear seat and the extended keyless entry. GranSport trim The GranSport trim underscores the sporty character of the Quattroporte while enhancing the aggressive appearance of the car. Thanks to new exterior design cues and interior content that reflect the legendary racing heritage of the Maserati brand. On the front of the Quattroporte GranSport, the dedicated restyling for the centre and side air intakes improves the cooling function while showcasing an aggressive front area. The lower fascia is linked to the grille with aerodynamic inspired splits. The back is characterized by an evident composition between a centre fuselage and two side pockets that focus the attention on the exhausts. An aggressive black piano spoiler completes the rear view. The Quattroporte GranSport is fitted with 21” Titano rims and features a glossy black finish on the bumpers, red brake calipers and blue inserts in the front Trident and side Saetta badge as well as blue Tridents on the wheel centres. As an option, the front grille of the GranSport can be ordered in a glossy black finish. The interior of the Quattroporte GranSport includes redesigned front and rear seats, with their sculptured profiles, to improve sporty driving performances while a new sport steering wheel, in carbon fibre or full leather, creates a strong identity. Thanks to the high gloss Piano Black wood trim on the dashboard, the brand new sport seats, the sport steering wheel fitted with aluminium gearbox paddles and the stainless steel sport pedals, the interior of the Quattroporte GranSport guarantees a truly sporty experience. A further opportunity for customization is available in the form of the optional Exterior Carbon Pack for the GranSport trim, to further enhance the sporty exterior. This pack features external mirrors, door handles and b-pillar cover plus the profile of the front bumper in carbon fibre. Engine-wise, the Quattroporte remains faithful to its traditions with a very wide range of engines and transmissions starting with the Quattroporte GTS, powered by the immense 530 hp 3.8 litre Ferrari-produced V8 Twin-Turbo with rear wheel drive, capable of a peak torque of 710 Nm and able to propel the car to 310 km/h, accelerating from 0 to 100 km/h in a mere 4.7 seconds. The Quattroporte is also available with the 410 hp 3.0 litre Ferrari-produced V6 Twin-Turbo, with rear wheel drive (Quattroporte S) or with Q4, the intelligent all-wheel-drive system available for the Quattroporte S Q4. At the top of the class for both versions are the 550 Nm of torque and the 286 km/h top speed, with the S Q4 variant accelerating from 0-100 km/h in 4.9 seconds and the rear-wheel drive Quattroporte S version in 5.1 seconds. Based on the same V6 architecture, the Quattroporte is also available in specific markets with 350 hp, 20 hp more than in the previous version, capable of delivering a powerful drive with a torque of 500 Nm, acceleration from 0 to 100 km/h in 5.5 seconds and a faster top speed of 270 km/h. The range is completed by the Quattroporte Diesel; equipped with a 3.0-litre V6 Turbo, it delivers 600 Nm of torque with 275 hp, retaining a top speed of 252 km/h and a quick 0-100 km/h figure of just 6.4 seconds. All versions of the Quattroporte are fitted with state-of-the-art ZF eight-speed automatic transmission and electronically-controlled Skyhook shock absorbers; with an ideal 50:50 weight distribution and an extensive use of aluminium in the chassis, body and suspension, performance and comfort are again unparalleled. The New Quattroporte. By Maserati. Exterior restyling Cx improved by 10% with the adoption of electric Air Shutter New GranLusso trim with individual contents New GranSport trim with individual contents New infotainment system with high resolution 8.4” capacitive touch screen Redesigned central console with rotary knob Standard Air Quality Sensor on all versions Advanced
Load more

Recommended publications
  • Tire Rule for Ponderosa (KY) Speedway | April 14, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56
    Tire Rules: Tire Rule for Ponderosa (KY) Speedway | April 14, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Florence (KY) Speedway | April 15, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Crossville (TN) Speedway | April 21, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Volunteer (TN) Speedway | April 22, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Smoky Mountain (TN) Speedway | May 4, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Boyd's (GA) Speedway | May 26, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Dixie (GA) Speedway | May 27, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 Tire Rule for Rome (GA) Speedway | May 28, 2017 Hoosier Racing Tire: 1350, 1600 American Racer: 48, 56 *** Tires will be checked for soaking and by durometer for hardness before each car goes on the track for qualifying or any racing action. Weight Rules: 2350# - Open Motor 2300# - Steel Block/Aluminum Head - Spec Motor Only (8" spoiler allowed, 12" sides) 2250# - CT525 Motor (8" spoiler allowed) 2250# - All Steel Motor or Crate Motor (8" spoiler allowed, 12" sides) 1. 1# per lap burnoff + 5 lbs. in B-Mains and Feature 2. Use of a Hans Device = 30# Weight Break 3. Use of working Fire Extinguisher = 20# Weight Break Body Rules: 1. The rules and/or regulations set forth herein do not express or imply warranty of safety, from publication of, or, compliance with these rules and/or regulations.
    [Show full text]
  • Civic Jdm Rear Licence Plate Holder
    Civic Jdm Rear Licence Plate Holder Derek is clean consanguineous after crosswise Christian blob his dependant hypocritically. Achondroplastic Filip decree approximately. Caucasoid Munmro never outfrowns so obtusely or scramblings any grinders thankfully. We missing a huge selection of Genuine Honda Parts across the entire footprint of Honda models, Tomei, and accessories. If we can change according to block the size number plates do look like. JDM front end conversion with the license plate holder area shaved off? If you must wear a problem calculating your jdm engine bay sold secondhand to see and margins for authenticity in. In order to use this website and its services, and clickbait titles. Your jdm rear of a pair of this? Consumer Reports or Google Reviews. Your order to respectfully share your desire is too large to avoid vague, plastic that included. All the licence plate holder, and ukdm categories which can always have ordered has deliberately selected a pair of several cars is to. Availability: In Stock; Qty. Car & Truck Suspension & Steering Parts 96-00 Honda Civic. You have exceeded the Google API usage limit. Cox Motor Parts, please specify when ordering. Copyright the rear license plate off the actually stamped for honda? Actual product may vary. Copyright The Closure Library Authors. EBay Motors Parts Accessories Car Truck Parts DecalsEmblemsLicense Frames License Plate Frames. Product is it legal minimum of honda. All, those stroke, rear disc conversion and very much more. Honda civic rear disc brakes of your jdm front or register to eliminate any other similar bolts for the licence plate to the subreddit may not satisfied with intake for the reason.
    [Show full text]
  • (12) Ulllted States Patent (10) Patent N0.: US 8,083,260 B2 Haynes (45) Date of Patent: Dec
    US008083260B2 (12) Ulllted States Patent (10) Patent N0.: US 8,083,260 B2 Haynes (45) Date of Patent: Dec. 27, 2011 (54) COMBINATION TRUNK COVER WITH 4,376,546 A 3/1983 Guccione et a1. SPOILER AND SCROLLING DISPLAY 4,574,269 A * 3/1986 Miller ......................... .. 362/503 4,607,444 A * 8/1986 Foster ........................... .. 40/550 . 4,925,234 A 5/1990 Park et al. (76) Inventor: R1c¢ard0V-Haynes,Med1na,OH (US) 4,958,881 A 4 9/1990 Piros ,,,,,,,,,,,,,,,,,,,,,,,,,,,,, H 296/98 4,966,406 A * 10/1990 Karasik et al. ................ .. 296/98 ( * ) Notice: Subject to any disclaimer, the term of this 5,016,145 A 5/ 1991 Singleton patent is extended or adjusted under 35 5,076,196 A * 12/1991 Chan ......................... .. 116/28 R U_S_C_ 154(1)) by 253 days_ 5,129,678 A * 7/1992 Gurbacki .................... .. 280/770 5,158,324 A 10/1992 Flesher _ 5,398,437 A * 3/1995 Bump et al. .................. .. 40/582 (21) APP1-NO-- 12/4201129 5,424,924 A * 6/1995 Ewing etal. 362/545 _ 5,533,287 A * 7/1996 Cole ............................. .. 40/591 (22) Flled: Apr. 8, 2009 6,056,425 A 5/2000 Appelberg 6,371,547 B1 4/2002 Halbrook (65) Prior Publication Data 7,063,375 B2 6/2006 Dringenberg et al. 7,095,334 B2 8/2006 Pederson US 2010/0019479 A1 Jan. 28, 2010 7,154,383 B2 12/2006 Berquist 7,175,229 B2 2/2007 Garcia - - 7,213,870 B1 5/2007 Williams Related US. Application Data 7,233,849 B2 6/2007 Hill et a1‘ (60) Provisional application No.
    [Show full text]
  • Saab 9-3 M03- Fog Lights
    900SCdefault Installation instructions MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Fog lights Accessories Part No. Group Date Instruction Part No. Replaces 12 787 092 9:35-05 May 03 12 789 095 12 789 095 Oct 02 F980A110 Saab 9-3 M03- 2 12 789 095 2 3 1 F930A248 1 Fog light L 2 Fog light R 3 Nuts (x4) The following part is also required (ordered separately) Light Switch Position Saab 9-3 M03- 12 789 095 3 2 2 2 2 2 2 3 2 F980A112 1 Raise the car. 2 Remove the spoiler shield, unplug the bumper connector and remove it from the holder on the spoiler shield. Cars with headlamp washers: Unhook the hose from the spoiler shield. 3 Clip the cable ties securing the connectors. Saab 9-3 M03- 4 12 789 095 4 4 5 4 6 6 4 7 F930A249 4 Remove the lower grille by bending in the locking tabs. Remove the temperature sensor from the grille. 5 Remove the covers. 6 Insert the fog light into the casing and fit the nuts. 7 Attach the connectors. Saab 9-3 M03- 12 789 095 5 9 8 8 9 9 F980A114 8 Fit the temperature sensor and the lower grille. 14 Adjust the fog lights and check their function Make sure the locking tabs fasten properly. according to car specifications. 9 Lift up the spoiler shield, fit the bumper connector Example: In Europe, as per vehicle testing into the holder and plug in the connector. requirements, fog lights may be used if the park- Cars with headlamp washers: Hook the hose ing lights, dipped or main beams have been to the spoiler shield.
    [Show full text]
  • Vespa-S150 2010-2014 (USA)
    SPARE PARTS CATALOGUE Vespa S 150 4T ie College 2009 - 2013 (USA) Chassis prefix: ZAPM688F Engine prefix: M683M Vespa S 150 EVPF000US1 Chassis prefix: ZAPM688F Vespa S 150 Engine prefix: M683M EVPF000US1 - Vespa S 150 4T ie College 2009 - 2013 (USA) Index Finished products........................................................................................................................................................................... 4 Alphanumeric index....................................................................................................................................................................... 5 Engine........................................................................................................................................................................................... 10 Table 01.02 - Engine, assembly..............................................................................................................................................10 Table 01.05 - Crankcase..........................................................................................................................................................11 Table 01.06 - Crankshaft.........................................................................................................................................................13 Table 01.07 - Cylinder-piston-wrist pin unit...........................................................................................................................14 Table 01.10 - Head unit
    [Show full text]
  • Design and Analysis of a New Rear Spoiler for Su Vehicle Mahindra Bolero Using Cfd
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 03 Issue: 06 | June-2016 www.irjet.net p-ISSN: 2395-0072 DESIGN AND ANALYSIS OF A NEW REAR SPOILER FOR SU VEHICLE MAHINDRA BOLERO USING CFD Kelbessa Kenea Deressa1, Kiran Kumar Sureddy2 1 Head of the Department, Department of Mechanical Engineering, Bulehora University, Ethiopia 2Lecturer, Department of Mechanical Engineering, Bulehora University, Ethiopia Abstract-Environmental issues and increased fuel are flowing underneath the vehicle which generally reduces driving forces for the automotive manufactures to develop aerodynamic lift and drag. Spoilers are often fitted to race and high-performance sports cars, although they have more fuel efficient vehicles with lower emissions. The need become common on passenger vehicles as well. Some for fuel efficiency is a rapidly increasing trend in spoilers are added to cars primarily for styling purposes automotive industries in the recent years. Therefore, and have either little aerodynamic benefit or even make the extensive research is undergoing for development of aerodynamics worse. Spoilers on the rear of a car are aerodynamically optimized vehicle designs. One of the known as wings when the fascia that produces the drag and design goals of the spoiler is to reduce drag and increase fuel down-force is physically separate from the body. A few years ago when oil crisis was not a problem, cars were efficiency. The drag coefficient is an important factor that mainly designed for high-speed maneuver, comfort, and determines the fuel efficiency of a vehicle in close safety. However, with the recent impact due to the proximity to the ground.
    [Show full text]
  • (56 GRE, 4-7 April 2006 Agenda Item 1.1.) PROP
    Informal document No. GRE-56-31 Transmitted by the Chairman of (56th GRE, 4-7 April 2006 the informal group agenda item 1.1.) PROPOSAL FOR A NEW GLOBAL TECHNICAL REGULATION (gtr) LIGHTING AND LIGHT-SIGNALLING DEVICES FOR ROAD VEHICLES: INSTALLATION PROVISIONS FOR VEHICLES OTHER THAN MOTORCYCLES Note: The text reproduced below was adopted by the informal group on the global technical regulation (gtr) on installation of lighting and light-signalling devices at its ninth informal meeting. After consideration at the fifty-sixth GRE session, it will be distributed with an official symbol ECE/TRANS/WP.29/GRE/2001/6/Rev.6 at GRE October 2006 session. The experts are invited to send their comments concerning this document to the Chairman of the informal group by end of May 2006 ([email protected]). It is expected that for further development of this document the 10th informal meeting of the informal group may be organized in June 2006 (Ottawa) or a teleconference, if appropriate. page 2 DRAFT GLOBAL TECHNICAL REGULATION ON LIGHTING AND LIGHT-SIGNALLING DEVICES FOR ROAD VEHICLES: INSTALLATION PROVISIONS FOR VEHICLES OTHER THAN MOTORCYCLES TABLE OF CONTENT: 1. SCOPE AND PURPOSE 2. APPLICATION 3. DEFINITIONS 4. GENERAL SPECIFICATIONS 5. INDIVIDUAL SPECIFICATIONS 5.1. DRIVING BEAM HEADLAMP 5.2. PASSING BEAM HEADLAMP 5.3. FRONT FOG LAMP 5.4. REVERSING LAMP 5.5. DIRECTION INDICATOR LAMP AND HAZARD WARNING SIGNAL 5.6. MIDDLE-SIDE DIRECTION INDICATOR 5.7. STOP LAMP AND CENTRE STOP LAMP 5.8. REAR REGISTRATION PLATE ILLUMINATING DEVICE 5.9. FRONT POSITION LAMP 5.10. REAR POSITION LAMP 5.11.
    [Show full text]
  • Honolulu Police Department Policy Law Enforcement
    HONOLULU POLICE DEPARTMENT POLICY LAW ENFORCEMENT OPERATIO NS 1 July 29, 201s Policy Number 4.141 POLICE SUBSIDIZED VEHICLES POLICY Privately owned automobiles used for police service (subsidized vehicles) shall comply with the specifications and guidelines established herein. PROCEDURE I. APPROVED VEHICLE LISTS A. Unless otherwise approved in writing by the Chief of Police, the only authorized subsidized vehicles are those specified on the attached approved vehicle lists. Vehicles are listed by year and model. B. Officers may propose vehicles to be considered for the approved vehicle lists. 1. The proposal shall be in the form of a memorandum and submitted to the commander of the Information Technology Division (ITO). 2. The proposed vehicle shall comply with all of the standards, specifications, restrictions, etc., established in this directive. It shall also be readily available for physical inspection by the ITO at the time the proposal is submitted. I I. GENERAL SPECIFICATIONS A. Wheelbase The wheelbase shall be no less than 100 inches. B. Engine Size 1. Engines with eight cylinders shall have a maximum displacement of 400 cubic inches. PUBLIC VERSION Security procedures and information redacted pursuant to HRS Section 92F 13(3). July 29, 2015 Policy Number 4.14 Page2 2 . Engines shall have a minimum of four cylinders. C. Fuel 1. Only gasoline engines are acceptable. 2. The department dispenses only 89 octane-level gasoline for all subsidized vehicles. D. Tire Size Tires shall fit the standard rim for the vehicle, not exceed ten inches in width, and not extend beyond the width of the fenders. Rim and tire sizes shall be the same for all four wheels with the only exception being noted for a specific vehicle on the approved vehicle lists.
    [Show full text]
  • Design and Fabrication of Adaptive Spoiler for Go - Kart Vehicles
    INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 9, ISSUE 03, MARCH 2020 ISSN 2277-8616 Design And Fabrication Of Adaptive Spoiler For Go - Kart Vehicles K.S. Karthi Vinith, P. Sathiamurthi Abstract: The vehicle accident also occurs due to over speed in the cornering, particularly in high speed cars (formula cars). The main objective of project is to replace the DRAG REDUCTION SYSTEM (DRS) in formula cars. The DRS system cost over 2 to 5 lakhs depends upon the formula Race type. On fixing of adaptive spoiler in formula cars it reduces cost and increase the performance and Drag during turning. The major source to reduce the speed of the vehicle is braking system. Another source that can be utilized to decelerate the vehicle on high speed travelling is aerodynamics. Adaptive Spoiler is one major solution for decelerating the vehicle using aerodynamics. Adaptive Spoiler serves to be efficient when compared with conventional spoiler. However, the use of adaptive spoiler with compact and cost effective design is rare in vehicles. The operation of Adaptive Spoiler is based on hydraulic motors and sensors are one of its major drawbacks and it’s not yet equipped in economic passenger cars. The use of adaptive spoiler in super cars is much costlier and does not fall in the economic category. The tilting operation will be controlled by the steering wheel using cable mechanism. The Adaptive Spoiler is pivoted at the center, using a C-clamp. When the steering wheel rotates, the 2 cables attached at both ends of the steering column will push and pull the cables at specific ends in order to tilt the spoiler.
    [Show full text]
  • Effect of Spoiler Design on Hatchback Car
    EFFECT OF SPOILER DESIGN ON HATCHBACK CAR Ashpak Kazi1*, Pradyumna Acharya2, Akhil Patil3 and Aniket Noraje4 1,2,3,4 Department of Automotive Engineering, School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu, India, 632014 Abstract- The aerodynamic aspects of automobiles have received more interest recently. Detailed knowledge of vehicle aerodynamics is more important to improve fuel efficiency and enhance stability of vehicle at high speed cruising. Additionally it provides improved external aesthetics. There are different ways to improve the aerodynamic performance of a car like using spoilers, air dam, diffuser etc. This paper deals with effect of addition of spoiler on Volkswagen Polo car in terms of coefficient of drag and lift. Main purpose of spoiler is to generate down force or negative lift. More down force is good but at the same time drag produced must be minimum. It is more important to maximize the down force to drag ratio. The VW Polo car was analyzed for two cases namely with and without spoiler. Creo 2.0 was used for modeling and Ansys Fluent 15 was used for CFD analysis. Validation was done with ahmed body. k-ω shear stress transport turbulence model was used for simulation. The results showed the effect of introduction of rear spoiler on drag and lift. Keywords- Spoiler, k-ω turbulence model, polyhedral mesh, Ansys fluent 15, Creo 2.0 *Corresponding Author : Ashpak Kazi I. INTRODUCTION When vehicle is running at speeds greater than 100 kmph it leads to uncontrollable lift and pitching moments hence high drag is produced. Lift is generated due to high velocity low pressure air flowing at the top of the vehicle and low velocity high pressure air flowing at bottom of the vehicle.
    [Show full text]
  • CAL ZN-5144-Supplement.Pdf
    0 .. Novemb2r ~ 7, 1972 Cornell AerO'1autjc.Ji Laboratory (CAL) changed jts name to Caj~pan CorporatIon and converted to for-profit OCe~,1t10r,::; C<'l:s.pan is dedlcat€!d r0 carrvlng on CAL's tor.g-~~andin') tradition of advanced research and development tron) arl i"rJeD~nd.sn{ \"t.::;,,, .. point_ All Dt CA L's civerse scienTific and enq;neering progralT1s for governrTlent af1rj ,ndustrv are beIng :Or)tlr'LJe'J '.' "'-I~: _~~,..':;<"" e~-":t'5, '::1f'CtrO~.!;'S arlO aVlon:;:s. ~omputer SClef"'Ges, "transportatio'l ann 'J":!!lic!e research, ar~d the environ­ mental SCi~"CI?~, C:-lI'.~r'Mr) It.; composeCI of the same staff, management. and facilities as CAL.- which operated $ince 1946 undl:!r fe,jeral !ncur~12 tax ~>":8mption. A Supplement To AN EVALUA TlON OF THE SAFETY PERFORMANCE OF TRICYCLES AND MINIBIKES Prepared For: DEPARTMENT OF HEALTH, EDUCATION AND WELFARE FOOD AND DRUG ADMINISTRATION BUREAU OF PRODUCT SAFETY ROCKVILLE, :\1ARYLAND 20852 NOVEMBER 1972 CONTRAC1 NO. FDA 72·91 PREPARED BY: ~~'.'~ APPROVED BY: R.S. Rice, Hec.i K.D. Bird, Head Vehicfe Dynamics Section Vel1Jcle Research Department /(, tYt~~&J ~ f R.D. Roland Research Engineer FOREWORD This docum ent is a supplementary volum e to the principal tech­ nical report, An Evaluation of the Safety Performance of Tricycles and Mini­ bikes, Calspan Report No. ZN-5l44-K-l on the work performed under Contract No. FD.:-\ 72-91 for the Bureau of Product Safety, Food and Drug Administration. Most of the observations and evaluations given herein were made by the test rider, Mr.
    [Show full text]
  • MY20 Panigale V2 DEF ENG.Pdf
    Panigale V2 | 3 Index 5 Panigale V2: Red Essence 16 First-class technology and electronics 6 Perfect balance of power and elegance 21 Riding Modes: each to their own riding style 10 Ducati Superquadro: efficient on track, smooth 22 Servicing and maintenance and enjoyable on the road 25 Technical data and equipment 13 The integration of a multifunctional frame 30 Accessories 14 Chassis: top quality components 36 Apparel 5 | Panigale V2 Panigale V2: Red Essence The Panigale twin has been given Equipment also includes a new a thorough makeover. Renamed electronics package that incorporates the Panigale V2, it adopts a totally ABS “Cornering” in addition to the new design, features sophisticated Quickshift (now with downshift function), electronics based on a 6-axis IMU and, engine brake traction control and anti- thanks to a more comfortable rider seat wheelie function. These controls are and updated suspension set-up, offers integrated into the Riding Modes (Race, better yet safer sports performance Sport and Street) and can be managed while making road riding more enjoyable via the new 4.3” colour TFT display that and user-friendly than ever. ensures more intuitive menu navigation, settings adjustment and Riding Mode The name tells Ducati twin-cylinder identification. enthusiasts that the bike is powered by the 955 cc Superquadro. Key features of the new Panigale V2 Include the single- sided swingarm and new exhaust with under-engine silencer, compact and with a single lateral exit, which stand out at first glance. A muscular yet elegant new design envelops the mechanics and emphasises the compact dimensions of the twin.
    [Show full text]