Materials List

Jamaica Cottage Shop, Inc. 170 Winhall Station Road S. Londonderry, VT 05155 Voice 802-297-3760 Fax 802-297-2825 [email protected] 8x10 Run In Shed-Basic Material List Sills Pressure Treated &RUUXJDWHG5RR¿QJ [[¶5HDU )URQW6LOOV 3LHFHVRIURR¿QJ#´ [[¶*DEOH6LOOV 3LHFHVRIURR¿QJ#´ 3LHFHV5LGJH&DS#´ 3LHFHV5LGJH&DS#´ Walls-Hemlock [[¶3RVWV [[¶$QJOHEUDFHV Hardware [[¶%HDULQJ%HDPV EV')UDPLQJ1DLOV [[¶*DEOH%HDPV'RRU3RVWV%UDFHV OEV'+'*+DQG1DLOV*DOY [[¶1DLOHU'RRU%ORFNLQJ 5RR¿QJ6FUHZV [[¶1DLOHU'RRUKHDGHU ´+H[%LW

Roof-Hemlock Suggested Tools [[¶5DIWHUV 6NLOO 6DZ RU +DQG VDZ 6DZ]DOO RU FKDLQ VDZ [[¶5DIWHUV +DPPHU [[¶5LGJH 1DLOSXOOHU FDWVSDZRUFURZEDU [[¶&ROODU7LHV ¶ WDSH PHDVXUH &KDON OLQH ([WHQVLRQ &RUG7LQ [[¶6WUDSSLQJ Snips 6WDSOHJXQ Temp Bracing/ Extra Lumber 3HQFLO [[¶+HPORFN 6SHHG6TXDUH)RXUIRRWOHYHO&RUGOHVV'ULOO [[¶3LQH ó´GULYHELWIRUGULOO 3KLOOLSV

Siding-Pine [[¶ [[¶ [[¶

Trim-Pine [[¶)DVFLD [[¶&RUQHU'RRU7ULP [[¶&RUQHU'RRU7ULP [[¶&RUQHU'RRU7ULP

8x12 Run in Shed Basic – Materials List

Floor (PT) Walls (Hemlock) Roof (Hemlock) Siding (Pine) Trim (Pine) Extra (Hemlock) (1) 4x6x12’ (6) 4x4x8’ (7) 2x6x8’ (14) 1x12x8’ (10) 1x4x8’ (2) 1x4x12’ (2) 4x6x8’ (3) 4x4x6’ (7) 2x6x4’ (11) 1x12x10’ (2) 1x4x6’ (3) 1x4x10’ (2) 4x6x28” (2) 4x4x12’ (8) 1x4x12’ (6) 1x12x12’ (2) 2x4x8’ (10) 2x4x8’ (5) 1x6x4’ (4) 1x8x8’ (1) 1x12x12’ (Pine) Pine: (1) 1x6x4’ (1) 1x8x12’

Suggested Tools Contact us today to Please contact us Skill Saw or Hand saw Pencil purchase a Hardware with any mistakes Saw-z-all or chain saw Speed Square Package to match this set of or discrepancies in Hammer Four-foot level these plans. We Nail puller (cats paw or crow bar) Cordless Drill plans. strive to provide 25’ tape measure ¼” drive bit for drill Chalk line #2 Phillips our clients with a Extension Cord #3 Square Drive quality product Tin Snips Razor Knife and encourage Staple gun Chisel feedback.

650 board feet of 1” random width and length rough sawn boards, siding, roofing boards, doors, trim, ridge & bracing

Roofing Metal Hardware Package Five sheets of 36” coverage corrugated metal roofing @ 97” Five sheets of 36” coverage corrugated metal roofing @ 42” 14 feet of ridge cap 275 painted screws 1 ½” x ¼” drive with rubber gasket

Nails 5 lbs 3 1/2" spikes (16’s) 8 lbs 2 3/8” galvanized (6’s) 5 lbs 3 ½” galvanized (16’s)

An allowance for mistakes and waste has been included

www.JamaicaCottageShop.com Page 7 Jamaica Cottage Shop, Inc. 170 Winhall Station Road S. Londonderry, VT 05155 Voice 802-297-3760 Fax 802-297-2825 [email protected] 10x10 Run In Shed-Basic Material List Sills Pressure Treated &RUUXJDWHG5RR¿QJ [[¶*DEOH )URQW6LOOV 3LHFHVRIURR¿QJ#´ [[¶%HDULQJ6LOOV 3LHFHVRIURR¿QJ#´ 3LHFHV5LGJH&DS#´

Hardware Walls-Hemlock EV')UDPLQJ1DLOV [[¶3RVW OEV'+'*+DQG1DLOV*DOY [[¶3RVWV 5RR¿QJ6FUHZV [[¶%HDPV ´+H[%LW [[¶%UDFHV [[¶1DLOHUV%ORFNLQJ [[¶+HDGHU%UDFHV Suggested Tools 6NLOO 6DZ RU +DQG VDZ 6DZ]DOO RU FKDLQ VDZ +DPPHU Roof-Hemlock 1DLOSXOOHU FDWVSDZRUFURZEDU [[¶5DIWHUV ¶ WDSH PHDVXUH &KDON OLQH ([WHQVLRQ &RUG7LQ [[¶5LGJH Snips [[¶&ROODU7LHV 6WDSOHJXQ [[¶6WUDSSLQJ 3HQFLO 6SHHG6TXDUH)RXUIRRWOHYHO&RUGOHVV'ULOO ó´GULYHELWIRUGULOO Temp Bracing/ Extra Lumber 3KLOOLSV [[¶+HPORFN [[¶3LQH [[¶

Siding-Pine [[¶ [[ [[¶ [[¶ [[¶

Trim-Pine [[¶)DVFLD [[¶)DVFLD [[¶&RUQHU'RRU7ULP [[¶&RUQHU'RRU7ULP

These plans are designed for Rough Sawn Lumber. Using dimensional lumber will require re-figuring measurements. www.JamaicaCottageShop.com 3DJH Jamaica Cottage Shop, Inc. 170 Winhall Station Road S. Londonderry, VT 05155 Voice 802-297-3760 Fax 802-297-2825 [email protected] 10x12 Run In Shed-Basic Material List Sills Pressure Treated &RUUXJDWHG5RR¿QJ [[¶6LOOV 3LHFHVRIURR¿QJ#´ 3LHFHVRIURR¿QJ#´ 3LHFHV5LGJH&DS#´

Walls-Hemlock Hardware [[¶3RVWV %HDPV EV')UDPLQJ1DLOV [[¶'RRU)UDPLQJ OEV'+'*+DQG1DLOV*DOY [[¶$QJOH%UDFHV *DEOH%HDPV 5RR¿QJ6FUHZV ´+H[%LW

Roof-Hemlock Suggested Tools [[¶5DIWHUV 6NLOO 6DZ RU +DQG VDZ 6DZ]DOO RU FKDLQ VDZ [[¶5DIWHUV +DPPHU [[¶5LGJH 1DLOSXOOHU FDWVSDZRUFURZEDU [[¶&ROODU7LHV ¶ WDSH PHDVXUH &KDON OLQH ([WHQVLRQ &RUG7LQ [[¶6WUDSSLQJ Snips 6WDSOHJXQ 3HQFLO Temp Bracing/ Extra Lumber 6SHHG6TXDUH)RXUIRRWOHYHO&RUGOHVV'ULOO [[¶+HPORFN ó´GULYHELWIRUGULOO [[¶3LQH 3KLOOLSV [[¶

Siding-Pine [[¶ [[¶ [[¶ [[¶

Trim-Pine [[¶)DVFLD [[¶)DVFLD [[¶&RUQHU'RRU7ULP [[¶&RUQHU'RRU7ULP

10x14 Run in Shed Basic – Materials List Floor (PT) Walls (Hemlock) Roof (Hemlock) Siding (Pine) Trim (Pine) Extra (Hemlock) (2) 4x6x12’ (2) 4x4x14’ (6) 1x4x14’ (9) 1x12x12’ (4) 1x8x16’ (2) 1x4x12’ (1) 4x6x14’ (3) 4x4x12’ (2) 1x6x10’ (12) 1x12x10’ (2) 1x4x16’ (3) 1x4x10’ (2) 4x4x10’ (8) 2x6x14’ (3) 1x12x16’ (2) 1x4x14’ (2) 2x4x8’ (1) 4x4x8’ Pine: (2) 1x12x14’ (1) 1x4x12’ (1) 1x12x14’ (Pine) (1) 2x4x14’ (1) 1x8x14’ (1) 1x6x8’ (1) 1x4x8’ (5) 2x4x10’ (1) 1x8x16’ (1) 1x10x12’ (1) 1x8x4’ (Rip to 1x5)

Please contact us Suggested Tools

with any mistakes Skill Saw or Hand saw Pencil or discrepancies in Saw-z-all or chain saw Speed Square these plans. We Hammer Four-foot level strive to provide Nail puller (cats paw or crow bar) Cordless Drill our clients with a 25’ tape measure ¼” drive bit for drill Chalk line #2 Phillips quality product Extension Cord #3 Square Drive and encourage Tin Snips Razor Knife feedback. Staple gun Chisel

650 board feet of 1” random width and length rough sawn boards, siding, roofing boards, doors, trim, ridge & bracing Contact us today to Roofing Metal purchase a Hardware Five sheets of 36” coverage corrugated metal roofing @ 116” Package to match this set of Five sheets of 36” coverage corrugated metal roofing @ 47” plans. 16 feet of ridge cap 350 painted screws 1 ½” x ¼” drive with rubber gasket

Nails 5 lbs 3 1/2" spikes (16’s) 8 lbs 2 3/8” galvanized (6’s) 5 lbs 3 ½” galvanized (16’s)

An allowance for mistakes and waste has been included

Hardware Package

www.JamaicaCottageShop.com Page 7 Jamaica Cottage Shop, Inc. 170 Winhall Station Road S. Londonderry, VT 05155 Voice 802-297-3760 Fax 802-297-2825 [email protected]

Floor- Pressure treated Hardware and Millwork 3-4x6x12’ Sills 1-4x6x10’ 6 - Metal Roof @47” Long 6-Metal Roof @ 116” Long 1- Metal Roof @47” Long -Ripped to 32” W Walls-Hemlock 1- Metal Roof @116” Long -Ripped to 32” W 2-4x4x16’ 2-Pieces Ridge Cap @123” 3-4x4x12’ 1-Piece @ 2’ 3-4x4x10’ 4-4x4x8’ 5lbs- 16d Framing Nails 5-2x4x10’ 8lbs-6d HDG Nails 2-2x4x8’ 5lbs-16D Galv Nails 400- Roofing screws Roof-Hemlock 11-2x6x14’ Rafters 16-1x4x10’ Strapping 1-#2 Sq drive bit 3-1x6x10’ 1-1/4” Hex bit 2-1x8x10’ Pine

Temp Bracing/ Extra Lumber 2-2x4x8’ 3-1x4x10’ 2-1x4x12’ 1-1x12x14’

Suggested Tools Skill Saw or Hand saw Siding-Pine Saw-z-all or chain saw 10-1x12x12’ Hammer 12-1x12x10’ Nail puller (cats paw or crow bar) 13-1x12x8’ 25’ tape measure 1-1x8x8’ Chalk line 1-1x6x8’ Extension Cord Trim-Pine Tin Snips 4-1x8x12’ Staple gun 3-1x8x10’ Pencil 1-1x8x8’ Speed Square 4-1x4x12’ Four-foot level 2-1x4x10’ Cordless Drill 5-1x4x8’ ¼” drive bit for drill #2 Phillips #3 Square Drive Razor Knife Chisel