Moreviz HMD Guide

Create tangible visions. Create tangible visions.

moreViz HMD Guide

more3D GmbH & Co. KG Mainzer Straße 276 53179 Bonn Germany

Tel +49 (0) 221 677 87 97 0 Fax +49 (0) 221 677 87 97 9 Email [email protected] www.more3d.com moreViz Software Create tangible visions.

moreViz Guide table of content

Table of content / Preface 2 Thank you very much for using moreViz - the universal VR Software bridge for CAD

VR HMD Comparison 3 moreViz bridges your app directly 1:1 into your existing VR environment. This guide VR System Requirements 5 aims at HMD (Head Mounted Display) users. For VR Powerwall and CAVE please refer NVidia Quadro Configuration 6 to the matching guide, provided by your more3D representative or alternatively to be found in the installation directory of the moreViz software. moreViz Server Control Configuration 7 moreViz basically consists of two components for HMD: Client: Vive / VivePro Configuration 8 Client: Oculus Rift with SteamVR Configuration 9 1. The moreViz Client Client: Bridge App GUI into VR 10 The moreViz Client receives the graphics data stream from the CAD application and renders it in VR. It needs to be launched before you start your CAD app. App Configuration: NX 11 App Configuration: Plant Simulation 12 2. The moreViz Server Control App Configuration: Process Simlulate 13 The moreViz Server control is used for configuring the connection type between your App Configuration: JT2Go 14 app and the VR Client. The moreViz Server control also features the moreViz Application App Configuration: Teamcenter Visualization 15 enabler which lists and enables your apps for VR Bridging. The server control should be App Configuration: SAP Visual Enterprise 16 automatically run on system startup, it uses only very little system resources and does not App Configuration: Catia / Delmia 17 establish any network connections to the internet. App Configuration: Catia Composer (Player) 18 App Configuration: IPS Cable Simulation 19 App Configuration: Creo View Express 20 App Configuration: Sketchup 21 App Configuration: visTABLE 22 App Configuration: TecPlot 23 App Configuration: Alias Design 24 App Configuration: ICEM Surf 25 App Configuration: Fledermaus 26 App Configuration: SimPack 27 App Configuration: Moldflow Communicator 28 App Configuration: Acute3D Viewer 29 App Configuration: Meshlab 30

Guide: Daily Use / FAQ 31

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

VR HMD Comparison

This quick guide lines out the differences be- With over 15 years of experience, more3D provides superior stereoscopic and virtual reality tween the Oculus Rift, HTC Vive and Vive Pro. software and solutions to clients in industry, trade and media. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. Please note that the resolution is a two dimen- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. sional value, see “pixel count” for total number of pixels. A higher resolution / pixel count stands for a sharper / better video quality.

Oculus Rift CV1 HTC Vive HTC Vive Pro

Display Type: OLED Display Type: OLED Display Type: AMOLED

Resolution: 2160x1200 px Resolution: 2160x1200 px Resolution: 2880x1600 px Per Eye Resolution: 1080x1200 px Per Eye Resolution: 1080x1200 px Per Eye Resolution: 1440x1600 px Pixel Count: 2.592.000 px Pixel Count: 2.592.000 px Pixel Count: 4.608.000 px

Refresh Rate: 90 Hz Refresh Rate: 90Hz Refresh Rate: 90Hz Field of View: 110° Field of View: 110° Field of View: 110°

Tracking Tech: Oculus Sensors Tracking Tech: Lighthouse Tracking Tech: Lighthouse Tracking Area: 2.2 x 2.2 m Tracking Area: 5 x 5 m Tracking Area: 5 x 5 m

Controllers: Touch, Xbox Controllers: Vive, Generic Gamepad Controllers: Vive, Generic Gamepad

Audio: Built-In Audio: Headphone connector Audio: Built-In Microphone: Built-In Microphone: Built-In Microphone: Built-In (Dual)

Req. connectors: 1x HDMI Req. connectors: 1x HDMI or DisplayPort Req. connectors: 1x DisplayPort 1x USB Headset 1x USB ConnectBox 1x USB ConnectBox 3x USB for Camera 1x Power ConnectBox 1x Power ConnectBox 2x Power Camera 2-4x Power Camera Native VR: Oculus Home SteamVR compatible: Yes Native VR: SteamVR Native VR: SteamVR

Install requirements: Connection to Facebook Install requirements: Connection to Steam Install requirements: Connection to Steam

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

VR HMD Comparison

Lenovo Explorer Pimax 5K Pimax 8K

Display Type: LCD Display Type: CLPL (custom LCD) Display Type: CLPL (custom LCD)

Resolution: 2880 x 1440 px Resolution: 5120 x1440 px Resolution: 7680 x 2160 px Per Eye Resolution: 1440 x 1440 px Per Eye Resolution: 2560 x1440 px Per Eye Resolution: 3840 x 2160 px Pixel Count: 4.147.200 px Pixel Count: 7.372.800 px Pixel Count: 16.588.800 px

Refresh Rate: 90 Hz Refresh Rate: 90Hz Refresh Rate: 90Hz Field of View: 110° Field of View: 200° Field of View: 200° Tracking Tech: InsideOut (no cam) Tracking Tech: Lighthouse Tracking Tech: Lighthouse Tracking Area: 3.5 x 3.5 m Tracking Area: 5 x 5 m Tracking Area: 5 x 5 m

Controllers: Windows MR controllers Controllers: Vive, Pimax Controls Controllers: Vive, Pimax Controls

Audio: Connector ready Audio: Connector Ready Audio: Connector Ready Microphone: Connector ready Microphone: Built-In Microphone: Built-In

Req. connectors: 1x HDMI Req. connectors: 1x DisplayPort 1.4 Req. connectors: 1x DisplayPort 1.4 1x USB Headset 1x USB 2/3 1x USB 2/3 1x Bluetooth Native VR: none Native VR: none Native VR: Windows Mixed Reality SteamVR compatible: Yes SteamVR compatible: Yes SteamVR compatible: Yes Install requirements: Connection to Steam Install requirements: Connection to Steam Install requirements: Win10 1803+, non-N, non-LSTC Notes: High FOV, High Res, Req. Strong GPU Notes: High FOV, High Res, Req. Strong GPU 8K native res is “only” upscaled 5K input.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

VR System Requirements

The moreViz software has the same system re- With over 15 years of experience, more3D provides superior stereoscopic and virtual reality quirements like the original application that’s to software and solutions to clients in industry, trade and media. be bridged into VR. moreViz works by copy- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ing the graphic commands of the actual ap- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. plication (e.g. Plant Simulation, Catia, NX,...). To output 3D to a projector, it is recommended to have an Nvidia Quadro card for best per- Here’s the official requirements by HTC forHTC Vive and HTC Vive Pro: formance.

As both Oculus and HTC are not directly listing professional graphics boards, we’re providing this list of VR-ready professional graphics board by Nvidia: GV100 GP100 P6000 P5000 P4000 M6000 24GB M5000 HTC provides a compatiblity checker app here. We have seen M4000 & K6000 GPUs to work as well, yet they are not officially supported by Here’s the official requirements by Oculus forOculus Rift: Nvidia.

AMD lists the following GPUs to be VR-Ready: Radeon Pro WX 9700 Radeon Pro SSG Radeon Pro WX 7100 AMD FirePro W9100 Radeon Pro Duo

Our basic recommendation is as follows:

For HMD (Vive / Rift): Quad Core CPU with 3.5Ghz or better 16GB Ram in Quad Channel or better SATA or M.2 SSD or better Geforce GTX 1080Ti or Quadro P5000

For Powerwall: Quad Core CPU with 3.5Ghz or better 16GB Ram in Quad Channel or better SATA or M.2 SSD or better Oculus provides a compatiblity checker app here. Quadro P4000 or better (no Geforce)

For CAVE: Hexa / Octa Core CPU with 3.4Ghz Please do not hesitate to contact us for technical assistance: [email protected] 32GB Ram or better SATA or M.2 SSD or better Quadro P5000 or better (no Geforce)

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

NVidia Quadro Confi guration Guide

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts.

This quick guide will explain which confi gura- 3. In the Select the “Global Preset” and set it to tion for Quadro Cards is necessary for Nvidia “Workstation App - Dynamic Streaming” Quadro Cards. Failure to follow the Guide will result in:

* No Tracking * Distorted Image * No Direct-Data Link in between your app and the VR environment 4. Click “Apply” and restart your computer.

1. Right click on your desktop, select “Nvidia 5. For Quad Buffer output modes in CAVE or Control Panel” Powerwall, make sure to set “Stereo Enable” to “Enable” and “Stereo Output Mode” matching to your 3D Output Device.

Please do not hesitate to contact us for technical assistance: [email protected] For sales related questions, please contact [email protected] For general inquiries, we’ll be at your service at [email protected]

2. In the left hand list, select “Manage 3D Set- tings”

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Server Control Configuration

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 6. The “Info” tab gives general information license on installation. about the software, the license and hardware.

This guide describes how to setup the moreViz Server Control matching to your environment.

1. Start the moreViz Server Control (start menu)

2. Notice the moreViz-Tray icon (next to system 4. The “Hotkeys” tab allows to define custom time) and right-click it, select “Properties”. hotkeys. Please note that defined keys will be systemwide unavialable as long as server con- 7. To complete the moreViz software setup, trol is active. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide Daily Use Guide

Do not hesitate to contact us for technical assistance at [email protected].

3. Select the connection Type. TCP/IP sends the graphic data to the specified IP adresses and ports. Useful for CAVE, cluster and remote sessions. UDP broadcasts the graphic data into the local network. Recommended for Cluster. Recommen- 5. The “Startup” Tab allow to have the moreViz dation: Use seperate network from company server control automatically start with Windows. network. This is highly recommended, it only uses 10MB Shared Memory: Transmit the data on local PC of Ram and does not establish any network con- using Shared Memory. Fastest method, best for nections outside of user-specified range. Further HMD. it is possible to disable the “more3D” software splash screen. If you ever encounter the loading process to timeout (transferring 3D data from your App to HMD), try TCP/IP as connection type. It has the biggest timeout tolerance.

Click the link below the IP adress mask to watch a video tutorial about moreViz HMD on Youtube.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

Client: HTC Vive and VivePro Configuration

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. 1. Launch the moreViz Client. You can do so Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. with the Desktop Icon or the start menu program group more3D -> moreViz. 7. moreViz only requires one VR controller. You Base: Set application’s/model’s base length unit can identify the active controller very easily: the (known apps do not show the option) one showing the yellow arrow on the touchpad Scale: Makes the geometry smaller or bigger is enabled for moreViz. View: Switch between 1:1 mirroring and inde- pendent position / rotation in VR and app 2. Right Click into the grey client window. The (shows only for supported applications) client will show its context menu. Speed: Set movement speed slower / faster Laser: Toggles the red line on the controller Dist: Enables to measure two or three points Clip: Allows to clip away geometry on a plane Flags: Add / Remove / GoTo Point of interest 3. (Optionally) Select “Restore” to send the cli- Select general movement direction on the touch- ent into windowed mode. pad. Pull the trigger to move into selected movement direction, based on controller direction. 4. Select “General Settings”. Set the “Output Push and hold the side button to couple to ge- Type” to “SteamVR”. ometry to the controllers position and rotation. The VR menu options are selected with the tou- pad, execution of selected function is done with the trigger.

8. The In-VR menu lets you set your preferences per app. To select options use the controller’s touchpad, to activate an option, pull the trigger.

Reset: Reset Position / Scale / Speed to default

5. Depending on your graphic board performance and model complexity, a higher value for “Pixel Density” is recommendable. With a Pixel Density of 1.0 moreViz will render exactly for the resolution of Vive / VivePro. With a value of e.g. 1.25 moreViz will render at 125% of the actual HMD resolution, causing a higher workload for the GPU and simultaneosly upgrading the image quality. Decreasing to a value smaller than one will increase render performance (FPS) but also reduce image quality.

6. After finishing the configuation: Please restart the client to make sure new settings are in effect.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

Client: Oculus Rift through SteamVR Configuration

1. Launch the moreViz Client. You can do so 5. Depending on your graphic board perfor- with the desktop icon or the start menu program mance and model complexity, a higher value group more3D -> moreViz. for “Pixel Density” is recommendable. With a Pixel Density of 1.0 moreViz will render exactly for the resolution of the Rift. With a value of 1.25 moreViz will render at 125% of the actual HMD resolution, causing a higher workload for the GPU and simultaneosly upgrading the image quality.

6. After finishing the configuation: Please restart the client to make sure new settings are in effect.

2. Right Click into the grey client window. The 7. moreViz requires one VR controller. You can client will show its context menu. identify the active controller very easily: the one 8. moreViz’es basic control in the VR scene is showing the yellow indicators is active for mor- pretty straight forward. Simply point the control- eViz. ler into a direction and pull the “move-trigger” on your index-finger. Push the joystick to select a different movement direction. The joystick shows the currently selected direction. To move or rotate the world, simply pull the “Couple World” Trigger on your index finger. Open and Close the VR Menu by pressing B or Y button (right/ left hand controls). Navigate the VR Menu with the joystick, pull the tigger at the index finger to 3. (Optionally) Select “Restore” to send the cli- select an option. ent into windowed mode.

4. Select “General Settings”. Set the “Output 9. The In-VR menu lets you set your preferences Type” to “SteamVR”. per app. To select options use the controller’s joystick, to activate an option, pull the trigger.

Reset: Reset Position / Scale / Speed to default Base: Set application’s/model’s base length unit (known apps do not show the option) Scale: Makes the geometry smaller or bigger View: Switch between 1:1 mirroring and inde- pendent position / rotation in VR and app (shows only for supported applications) Speed: Set movement speed slower / faster Laser: Toggles the red line on the controller Dist: Enables to measure two or three points Clip: Allows to clip away geometry on a plane Flags: Add / Remove / GoTo Point of interest

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz Software Create tangible visions.

Client: Bridge your App into VR

Download the free open-source software “Open- VRDesktopDisplayPortal” (OVRD) from here. Download and extract to any location of prefer- ence. Now startup the components in this sequence: 1. moreViz Server Control 2. moreViz Client 3. Your App 4. OVRD

Your app must be on top of the screen, it must not be covered by other windows. It has proven very useful to create an undocked window containing the main functions from your app. When bridging the entire GUI of your app, it is recommended to have a rather small, windowed layout.

1. Select the app window to bridge into VR 6. Set transparency between 0 and 1. 2. On Windows7, set to GDI Indirect. 7. Scale the size of the in-VR GUI. 3. Position the in-VR GUI along X, Y and Z axis. 8. Save and load Presets. 4. Rotate the in-VR GUI along X, Y and Z axis. 5. Select “World”, this places the in-Vr GUI in Please do not hesitate to contact us for technical To operate the inVR GUI, use the secondary con- your room-scale environment. assistance and support at : troller (the controller not used to operate mor- Alternatively it is possible to have the GUI float [email protected] eViz, see point 10 on the first page). above one VR controller (“Controller”) To left click: pull the trigger. Another option is to have the GUI glued to a Thank you for reading this guide. We hope you To right click: click the touchpad. position in the HMD (“Screen”). enjoy the new way to see your digital work.

We have many tutorial videos available on our youtube channel: more3DStereo.

Seeing the complete configuration can be eas- ier than reading your way through the texts.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: NX

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day We have many tutorial videos available on our license on installation. youtube channel: more3DStereo.

Please proceed as follows: 1. Start the moreViz Server Control (start menu)

5. Place the checkmark in the “enabled” column for NX / ugraf.exe.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select “moreViz Applica- tion Enabler”.

Seeing the complete configuration can be easi- 6. Click “Save & Close” er than reading your way through the texts.

7. NX is now properly confi gured for use with moreViz.

8. To complete an initial moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide 3. Click “Locate known Apps”. moreViz will Quadro Confi guration Guide search the standard program fi les folders for Daily Use Guide known NX installation locations and add them to the list. 9. Do not hesitate to contact us for technical assistance at [email protected].

4. If your NX is installed to a non standard directory, please click “Add Application”, locate your “ugraf.exe” fi le. It is usually located in “X:\Program Files\Siemens\NX 10.0\UGII”, “X:\Program Files\Siemens\NX 11.0\NXBIN”, “X:\Program Files\Siemens\NX 12.0\NXBIN”

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Plant Simulation

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day 4. Exit Plant Simulation. 9. Place the checkmark in the “enabled” column license on installation. for your app. 5. Start the moreViz Server Control (start menu) Please proceed as follows:

1. Launch Plant Simulation

2. Click on “File” and “Preferences” 10. Click “Save & Close”

6. Notice the moreViz-Tray icon (next to system 11. Plant Simulation is now properly confi gured time) and right-click it, select for use with moreViz. “moreViz Application Enabler”. 12. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Confi guration Guide Daily Use Guide

13. Do not hesitate to contact us for technical assistance at [email protected].

7. Click “Locate known Apps”. moreViz will search the standard program fi les folders for We have many tutorial videos available on our known Plant Simulation installation locations youtube channel: more3DStereo. and add them to the list.

3. Switch to the “3D” Tab and set the “OpenGL Version” to 1.5

8. If your Plant Simulation is installed to a non standard directory, please click “Add Applica- tion”, locate your “Plant Simulation.exe” fi le.

Seeing the complete configuration can be easi- er than reading your way through the texts.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Process Simulate

7. Click “Locate known Apps”. moreViz will 9. Place the checkmark in the “enabled” column search the standard program files folders for for Process Simlate / Tune.exe. known Process Simulate installation locations and add them to the list.

3. Switch to the “Performance” Tab and set the 10. Click “Save & Close”, Process Simlate is “OpenGL Accelerastion Level” to “V1.5”, drag now properly configured for use with moreViz. te the “Level of Details “ Slider all to the left for best Quality. 11. When working in VR: make sure Process Simlate is running in perspective view mode. 8a. If your Process Simulate is installed to a non standard directory, please click “Add Applica- tion”, locate your “Tune.exe” file. It is usually located in “X:\Program Files\TecnomatixShared\ TecnomatixCurrent\eMPower” or “X:\Program 12. To complete the moreViz software setup, Files\Tecnomatix_13.1\eMPower”. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide Daily Use Guide

13. Do not hesitate to contact us for technical assistance at [email protected].

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: JT2Go

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day 6. Notice the moreViz-Tray icon (next to system license on installation. time) and right-click it, select “moreViz Application Enabler”. Please proceed as follows: 1. Launch JT2Go and load a model. 2. Right-click into the viewport and select “Performance” -> “Edit”

7. Click “Locate known Apps”. moreViz will search the standard program fi les folders for known JT2Go installation locations and add them to the list. 9. Place the checkmark in the “enabled” column for JT2Go / VisView_NG.exe.

3. Switch to the “Troubleshoot” Tab and set the “Effective OpenGL Version” to “1.5” and click “OK”. 10. Click “Save & Close” 8a. If your JT2Go is installed to a non standard directory, please click “Add Application”, 11. JT2Go is now properly confi gured for use locate your “VisView_NG.exe” fi le. It is usually with moreViz. located in “X:\Program Files\Siemens\JT2Go\ Products\JT2Go”. 12. When operating Jt2Go in VR, we recom- mend to set the “Performance” of TcVis to “Part Investigation”

13. To complete the moreViz software setup, 4. Exit Jt2Go. make sure you’ve followed these guides as well: 5. Start the moreViz Server Control (start menu) moreViz Server Control / Network Guide 8b. After adding your non-standard-directory moreViz Client: Vive / Oculus / Cave Guide version of JT2Go, please click the “Browse” but- Quadro Confi guration Guide ton in the VisView_NG.exe’s row. Navigate to Daily Use Guide the “Program” subdirectory and click OK. It is usually located either here: “X:\ Program Files\ 14. Do not hesitate to contact us for technical Siemens\JT2Go\Program“. assistance at [email protected].

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Teamcenter Visualization / TcVis / Connect

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will usually provide the download link with- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. in one business day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. This guide targets all versions of TcVis (Base/ Pro/Mockup) and also Applies to Teamcenter Connect and its derivates. 6. Notice the moreViz-Tray icon (next to system time) and right-click it, select “moreViz Application Enabler”. Please proceed as follows: 1. Launch TcVis and load a model. 2. Right-click into the viewport and select “Performance” -> “Edit”

7. Click “Locate known Apps”. moreViz will search the standard program fi les folders for known TcVis installation locations and add them to the list. 9. Place the checkmark in the “enabled” column for TcVis / VisView_NG.exe.

3. Switch to the “Troubleshoot” Tab and set the “Effective OpenGL Version” to “1.5” and click “OK”. 10. Click “Save & Close”

8a. If your TcVis is installed to a non standard 11. TcVis is now properly confi gured for use directory, please click “Add Application”, lo- with moreViz. cate your “VisView_NG.exe” fi le. It is usually located in “X:\Program Files\Siemens\Team- 12. When operating TcVis in VR, we recom- center11.3\Visualization\Products\Mockup”. mend to set the “Performance” of TcVis to “Part Investigation”

13. To complete the moreViz software setup, 4. Exit TcVis. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide 5. Start the moreViz Server Control (start menu) 8b. After adding your non-standard-directory moreViz Client: Vive / Oculus / Cave Guide version of TcVis, please click the “Browse” but- Quadro Confi guration Guide ton in the VisView_NG.exe’s row. Navigate to Daily Use Guide the “Program” subdirectory and click OK. It is usually located either here: “X:\Program Files\ 14. Do not hesitate to contact us for technical Siemens\Teamcenter11.3\Visualization\Pro- assistance at [email protected]. gram“.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: SAP Visual Enterprise Viewer / Author

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 6. Click “Locate known Apps”. moreViz will We have many tutorial videos available on our license on installation. search the standard program files folders for youtube channel: more3DStereo. known SAP Visual Enterprise installation loca- Please proceed as follows: tions and add them to the list.

1. Launch SAP Visual Enterprise Viewer/Author and load a model.

2. Right click into the viewport, select “Prefer- ences -> Display Renderer -> OpenGL”

7. If your SAP Visual Enterprise is installed to a non standard directory, please click “Add Application”, locate your “VEViewer.exe” or “VEAuthor.exe” file. Seeing the complete configuration can be easi- er than reading your way through the texts.

3. Exit SAP Visual Enterprise Viewer / Author. 8. Place the checkmark in the “enabled” column 4. Start the moreViz Server Control. for your app.

9. Click “Save & Close”

10. SAP Visual Enterprise is now properly con- 5. Notice the moreViz-Tray icon (next to system figured for use with moreViz. time) and right-click it, select “moreViz Application Enabler”. 11. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide Daily Use Guide

Do not hesitate to contact us for technical assistance at [email protected].

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Catia / Delmia

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day license on installation. 9. To complete the moreViz software setup, make sure you’ve followed these guides as well: Please proceed as follows: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide 1. Start the moreViz Server Control. Quadro Configuration Guide Daily Use Guide

5. Place the checkmark in the “enabled” column Do not hesitate to contact us for technical as- for your app. sistance at [email protected].

We have many tutorial videos available on our 2. Notice the moreViz-Tray icon (next to system youtube channel: more3DStereo. time) and right-click it, select “moreViz Application Enabler”. 6. Click “Save & Close”

7. Catia / Delmia is now properly configured for use with moreViz.

8. When working in VR, please make sure to set the Visualization mode in Catia to “Perspec- tive”, you can find it in View -> Render Style:

Seeing the complete configuration can be easi- 3. Click “Locate known Apps”. moreViz will er than reading your way through the texts. search the standard program files folders for known Catia / Delmia installation locations and add them to the list.

4. If your Catia/Delmia is installed to a non standard directory, please click “Add Applica- tion”, locate your “CNext.exe”. The standard path is X:\Program Files\Dassault Systemes\ Bxx\win_b64\code\bin (xx = version number).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Catia Composer (Player)

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day 10. Click “Save & Close”, Catia Composer license on installation. (Player) is now properly confi gured for use with moreViz. Please proceed as follows: 1. Launch Catia Composer (Player) 11. When working in VR: make sure Catia 2. Click “Help” and “Application Preferences” Composer (Player) is running in perspective view mode.

7. Click “Locate known Apps”. moreViz will search the standard program fi les folders for 3. Switch to the “Hardware Support” Tab and known Catia Composer (Player) installation lo- set the “OpenGL Accelerastion Level” to “Stand- cations and add them to the list. ard”. Uncheck the “Enable P-Buffers” checkbox.

12. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Confi guration Guide 8. If your Catia Composer (Player) is installed Daily Use Guide to a non standard directory, please click “Add Application”, locate your “ComposerPlayer. 13. Do not hesitate to contact us for technical exe”/ “CatiaComposer.exe” fi le. It is usually lo- assistance at [email protected]. cated in “X:\Program Files\Dassault Systemes\ CATIAComposer\x.x\Bin”. 4. Exit Catia Composer (Player).

5. Start the moreViz Server Control (start menu)

9. Place the checkmark in the “enabled” column for Catia Composer (Player) / ComposerPlayer. 6. Notice the moreViz-Tray icon (next to system exe. time) and right-click it, select “moreViz Application Enabler”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: IPS

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day license on installation.

Please proceed as follows: 1. Start the moreViz Server Control (start menu)

5. Place the checkmark in the “enabled” column for IPS.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select “moreViz Applica- tion Enabler”. 6. Click “Save & Close”.

7. moreViz is now properly confi gured for use with IPS.

3. Click “Locate known Apps”. moreViz will Do not hesitate to contact us for technical as- search the standard program fi les folders for sistance at [email protected]. known IPS installation locations and add them to the list.

4. If your IPS is installed to a non standard directory, please click “Add Application”, locate the “IPS.exe” fi le. It’s usually located in X:\IPS x.x (xx =version, e.g. IPS 3.5).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Creo View Express

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day 8b. Go to the “Active View” bullet point on top, license on installation. then “Model” in the left hand list, then set the “View Mode” to “Perspective”. Please proceed as follows: 1. Start the moreViz Server Control (start menu)

5. Place the checkmark in the “enabled” column for Creo View Express / productview.exe.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select “moreViz Applica- tion Enabler”.

6. Click “Save & Close”

7. moreViz is now properly confi gured for use with Creo View Express. To complete an initial moreViz software setup, make sure you’ve followed these guides as well: 8a. Make sure that Creo View Express is run- moreViz Server Control / Network Guide ning in perspective view mode. Load a model, moreViz Client: Vive / Oculus / Cave Guide then click on “File” and select “Options” Quadro Confi guration Guide Daily Use Guide

3. Click “Locate known Apps”. moreViz will 9. Do not hesitate to contact us for technical as- search the standard program fi les folders for sistance at [email protected]. known Creo View Express installation locations and add them to the list.

4. If your Creo View Express is installed to a non standard directory, please click “Add Ap- plication”, locate the “productview.exe” fi le. It’s usually located in X:\PTC\Creo 5.0\View Express\i486_nt\obj.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Sketchup

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to [email protected]. software and solutions to clients in industry, trade and media. We will provide the download link within 1 busi- We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. ness day. Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefi ts. After downloading, simply run the fi le and follow the instructions on-screen. The installer will automatically create a 14-day license on installation.

Please proceed as follows: 1. Start the moreViz Server Control (start menu)

5. Place the checkmark in the “enabled” column for Sketchup.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select “moreViz Applica- tion Enabler”.

6. Click “Save & Close”.

7. moreViz is now properly confi gured for use with Sketchup.

To complete an initial moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Confi guration Guide 3. Click “Locate known Apps”. moreViz will Daily Use Guide search the standard program fi les folders for known Sketchup installation locations and add Do not hesitate to contact us for technical as- them to the list. sistance at [email protected].

4. If your Sketchup is installed to a non standard directory, please click “Add Applica- tion”, locate the “SketchUp.exe” fi le. It’s usually located in X:\SketchUp\SketchUp 20xx (xx =year/version).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: visTABLE 2.6+

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 9. Disable “Show Environment” (“Umgebung license on installation. anzeigen” in German).

Please proceed as follows:

1. Start the moreViz Server Control.

5. Place the checkmark in the “enabled” column for visTABLE / 3dc64.exe. 10. Now close visTABLE and the 3dc64.exe. For the daily use, launch the software components in the following order: a) moreViz Server Control 2. Notice the moreViz-Tray icon (next to system b) moreViz Client time) and right-click it, select 6. Click “Save & Close” c) 3dc64.exe custom shortcut “moreViz Application Enabler”. d) visTABLE 7.1 If you have installed Vistable into its stand- or simply use the VBS file from the support pack- ard directory, you can skip Step 7.2 and in- age. stead download this support package. Copy the “Vistable_OpenGL.lnk” to “C:\Program 11. To complete the moreViz software setup, Files (x86)\visTABLE\2.0\bin\”. Keep the vista- make sure you’ve followed these guides as well: ble_VR_start.vbs on your desktop. moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide 7.2 Create a shortcut to 3dc64.exe and open Quadro Configuration Guide its properties. Add the following paramter in Daily Use Guide the target line: -8c1b014c-2b6d-442c-a6b7- 3. Click “Locate known Apps”. moreViz will 06e3112f5eeb, so the full path looks like this: Do not hesitate to contact us for technical as- search the standard program files folders for “X:\Program Files (x86)\visTABLE\2.x\ sistance at [email protected]. known visTABLE installation locations and add bin\3dc64.exe” -8c1b014c-2b6d-442c-a6b7- them to the list. 06e3112f5eeb. Hint: You can copy and paste We have many tutorial videos available on our the GUID / letter-number sequence from this youtube channel: more3DStereo. PDF. Launching this shortcut launches the 3D viewer of VisTABLE in OpenGL mode - which is required for VR bridging with moreViz.

8. Launch VisTABLE. Launch the newly created/ downloaded shortcut. Load a visTABLE file. 4. If your VisTABLE is installed to a non stand- Click the three bars in the top left corner and ard directory, please click “Add Application”, select “Settings” (“Einstellungen” in German). locate your “3dc64.exe”. The standard path is X:\Program Files (x86)\visTABLE\2.x\bin\” (x = version number).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: TecPlot

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 8. To complete the moreViz software setup, license on installation. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide Please proceed as follows: moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide 1. Start the moreViz Server Control. Daily Use Guide

5. Place the checkmark in the “enabled” column Do not hesitate to contact us for technical as- for TecPlot / tec360.exe. sistance at [email protected].

We have many tutorial videos available on our youtube channel: more3DStereo. 2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch Tec- Plot. Load a TecPlot project file. In TecPlot, click on “View” -> “3D View Details” and place the checkmark at “Use Perspective”.

3. Click “Locate known Apps”. moreViz will search the standard program files folders for known TecPlot installation locations and add them to the list.

4. If your TecPlot is installed to a non standard directory, please click “Add Application”, locate your “tec360.exe”. The standard path is X:\Program Files\Tecplot\Tecplot 360 EX 2017 R1\bin”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Autodesk Alias Design

Please proceed as follows:

1. Start the moreViz Server Control.

5. Place the checkmark in the “enabled” column for Alias / Alias.exe.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch TAli- as. Load a Alias project file. Enjoy VR!

A 8. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide Daily Use Guide

3. Click “Locate known Apps”. moreViz will Do not hesitate to contact us for technical as- search the standard program files folders for sistance at [email protected]. known TecPlot installation locations and add them to the list. We have many tutorial videos available on our youtube channel: more3DStereo.

4. If your Alias is installed to a non standard directory, please click “Add Application”, locate your “Alias.exe”. The standard path is X:\Pro- gram Files\Autodesk\AliasDesign2019\bin”. Depending on your Alias Version the pathname might be different, yet the “bin” subfolder in the Alias”Version”“Year” (e.g. AliasDesign2019) level is where we find the targeted “Alias.exe”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: ICEM Surf

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 8. To complete the moreViz software setup, license on installation. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide Please proceed as follows: moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide 1. Start the moreViz Server Control. Daily Use Guide

5. Place the checkmark in the “enabled” column Do not hesitate to contact us for technical as- for ICEM Surf / ICEMSurf.exe. sistance at [email protected].

We have many tutorial videos available on our youtube channel: more3DStereo. 2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch ICEM Surf. Load a ICEM Surf project file. In ICEM Surf, click on “View” (eye symbol with three arrows in lower button bar).

Then the “Perspective” option “Central” (instead of “Parallel”. 3. Click “Locate known Apps”. moreViz will search the standard program files folders for known ICEM Surf installation locations and add them to the list.

4. If your ICEM Surf is installed to a non standard directory, please click “Add Application”, locate your “ICEMSurf.exe”. The standard path is X:\Program Files\ICEM\win_b64\code\ bin”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Fledermaus

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 8. To complete the moreViz software setup, license on installation. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide Please proceed as follows: moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide 1. Start the moreViz Server Control. Daily Use Guide

5. Place the checkmark in the “enabled” column Do not hesitate to contact us for technical as- for Fledermaus / Fledermaus.exe. sistance at [email protected].

We have many tutorial videos available on our youtube channel: more3DStereo. 2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch Fledermaus. Load a Fledermaus project file. In Fledermaus, click on “View” and select “Proper- ties”. Set the “Projection Type” to “Perspective”.

3. Click “Locate known Apps”. moreViz will search the standard program files folders for known Fledermaus installation locations and add them to the list.

4. If your Fledermaus is installed to a non standard directory, please click “Add Application”, locate your “Fledermaus.exe”. The standard path is X:\Program Files\QPS\Fledermaus\ bin”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: SimPack

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 8. To complete the moreViz software setup, license on installation. make sure you’ve followed these guides as well: moreViz Server Control / Network Guide Please proceed as follows: moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide 1. Start the moreViz Server Control. Daily Use Guide

5. Place the checkmark in the “enabled” column Do not hesitate to contact us for technical as- for SimPack / simpack-gui.exe. sistance at [email protected].

We have many tutorial videos available on our youtube channel: more3DStereo. 2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch Sim- Pack. Load a SimPack project file. In SimPack, click on “View” and select “Properties”. Set the “Projection Type” to “Perspective”.

3. Click “Locate known Apps”. moreViz will search the standard program files folders for known SimPack installation locations and add them to the list.

4. If your SimPack is installed to a non standard directory, please click “Add Application”, locate your “simpack-gui.exe”. The standard path is X:\Program Files\Simpack-20xx\run\bin\ win64” (xx= year release number, e.g. 18).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Autodesk Moldflow Communicator

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. The installer will automatically create a 14-day 8. Go To “Viewing Options” and tick the license on installation. checkbox at “Use Perspective Mode for new windows”. Please proceed as follows:

1. Start the moreViz Server Control.

5. Place the checkmark in the “enabled” column for Moldflow / mfresview.exe.

9. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide 3. Click “Locate known Apps”. moreViz will Daily Use Guide search the standard program files folders for known Moldflow installation locations and add Do not hesitate to contact us for technical as- them to the list. sistance at [email protected].

We have many tutorial videos available on our youtube channel: more3DStereo.

4. If your Moldflow is installed to a non standard directory, please click “Add Application”, locate your “mfresview.exe”. The standard path is X:\Program Files\Autodesk\Moldflow Com- municator 20xx\bin” (xx= year release number, e.g. 18).

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Acute3D Viewer

Please proceed as follows:

1. Start the moreViz Server Control.

5. Place the checkmark in the “enabled” column for Acute3D Viewer / CCViewer.exe.

8. To complete the moreViz software setup, make sure you’ve followed these guides as well: moreViz Server Control / Network Guide moreViz Client: Vive / Oculus / Cave Guide Quadro Configuration Guide Daily Use Guide

3. Click “Locate known Apps”. moreViz will Do not hesitate to contact us for technical as- search the standard program files folders for sistance at [email protected]. known Acute3D Viewer installation locations and add them to the list. We have many tutorial videos available on our youtube channel: more3DStereo.

4. If your Acute3D Viewer is installed to a non standard directory, please click “Add Applica- tion”, locate your “CCViewer.exe”. The standard path is X:\Program Files\Bentley\Acute3D Viewer\bin”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge Create tangible visions.

moreViz Setup Guide: Meshlab

To download the latest Version of moreViz, With over 15 years of experience, more3D provides superior stereoscopic and virtual reality please send us a request to software and solutions to clients in industry, trade and media. [email protected]. We create solutions for 3D VR CAVE, 3D projection, 3D monitors, 3D TVs, 3D HMDs. We will provide the download link within 1 busi- Inspire your customers and colleagues with 3D VR visualisation and its sustainable benefits. ness day. After downloading, simply run the file and follow the instructions on-screen. tion Guide The installer will automatically create a 14-day Daily Use Guide license on installation. Do not hesitate to contact us for technical as- Please proceed as follows: sistance at [email protected].

1. Start the moreViz Server Control. We have many tutorial videos available on our youtube channel: more3DStereo. 5. Place the checkmark in the “enabled” column for Meshlab / Meshlab.exe.

2. Notice the moreViz-Tray icon (next to system time) and right-click it, select 6. Click “Save & Close” “moreViz Application Enabler”. 7. Start the moreViz client and then launch Meshlab.

3. Click “Locate known Apps”. moreViz will search the standard program files folders for known Meshlab installation locations and add them to the list.

4. If your Meshlab is installed to a non standard directory, please click “Add Application”, locate your “Meshlab.exe”. The standard path is X:\Program Files\VCG\MeshLab”.

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com moreViz VR Bridge

moreViz HMD daily use guide / FAQ

3. The graphics inside VR look broken * Check if you properly configured the OpenGL version for your app.

4. Movement in VR is very slow * Check if the scaling of the app is correct. 2. When the tray icon of the moreViz Server When the scaling is too big, movement will Control moreViz is available in the tray bar, the seem very slow and stereo effect (“3D”) is very software is ready for operation. little. Try scaling smaller. Seeing the complete configuration can be easi- 5. Graphics inside VR are stretched vertically er than reading your way through the texts. * Set your app to perspective mode

3. Launch your moreViz Client. 6. General Performance in VR is low / laggy Make sure its configured for * VR is expensive on the hardware. Try reduc- your output device. ing the amount of data you’re pushing. E.g. remove standard bolts/screws/nuts from your 4. Run your app and load a model. Make sure model file. Further, try using a simple shaded its set to perspective projection mode. Look up mode. Disable SteamVR Home Beta (Vive). the detail guide for details on your app.

5. Enjoy VR

more3D GmbH & Co.KG Mainzer Straße 276 Fon +49(0)221 677 8797-0 [email protected] 53179 Bonn, Germany Fax +49(0)221 677 8797-9 www.more3d.com