DOCSLIB.ORG

Guide to Blum Concealed Hinges

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Guide to Blum Concealed Hinges 299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 304 Understanding Concealed Hinges & Program CLIP top hinges for frameless and face frame construction. CLIP Tab Because of appearance, function and 6-way independent adjustability • Snap to attach door pull up to release European concealed hinges are now the industry standard for cabinet doors. Blum’s Clip Top hinge design also gives the added advantage of easy Depth adjustment door attachment and removal. In and out. • With Spiral-Tech depth adjustment, just one and three quarter revolu- tions of the screw creates 5mm of adjustment without loosening and Locks / Catches Hinges Knobs / Pulls Hinge retightening a fixing screw. Arm • Side adjustment is a flush screwhead that allows 4mm of adjustment. It also has an integral stop that prevents removal. Side to Side • Height adjustment is accomplished on the mounting plate Adjustment with a range of +/- 2mm. • For door thickness greater than 22mm a trial application is recommended or use the Thick door hinge (see pages 318-319) Hinge Cup Blind Corner Slides Lazy Susan / Frameless CLIP Mounting Plate Face Frame CLIP Mounting Plate Organizers Kitchen / Bath NOTE: For econom- Allows for face frame ical alternative face applications for Recycle frame concealed Waste / Waste all CLIP top hinges. hinge, see compact Height Adjustment Height Adjustment series hinges on next page. Office / Entertainment Basic Hinge Options Basic Mounting Plate Options Hinges per Door Frameless Face Frame Closet Shelf / 9/16 Wood, Decorative 0mm 9mm Fittings Bar Rail / Straight Arm Half Cranked Arm Also available in 3mm and 6mm. Overlay Full Inset Basic Hinge and Plate Combinations Frameless Construction Face Frame Construction half cranked straight half cranked half cranked Casters Lighting arm arm Levelers / arm straight arm arm 0mm 0mm 9mm 0mm face frame 9/16” 9mm inset plate plate plate plate plate Table Hdwe Table Side Panel Fasteners / Side Panel Door Door Door Full Overlay Half Overlay Full Inset Full Overlay, Face Frame Full Inset, Face Frame STEP 1: Install door using one of the four hinges, each with their own attachment method. Screw-on Press-in EXPANDO INSERTA Finishing Edgebanding Adhesives Abrasives / Bits / Blades Pre-attached expanding Depressing cover expands cup Use #6 wood screws. Pre-attached 8mm dowels, dowels. Pre-bore with for tool-free mounting. Pre- installed with Blum MINIPRESS. MINIPRESS. bore with MINIPRESS. Festool Continued on next page Shop Tools / Shop Tools HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 304 FAX: 800/207-0180 • www.hdlusa.com • 2020 299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 305 Call for volume pricing. (Cont.) For Non-Stock items see page 12 Concealed Hinges Knobs / Pulls Hinges STEP 2: Install mounting plate using STEP 3: Attach door to cabinet with one of three attachment methods. clip mechanism. Catches Slides Locks / *Screw-On EXPANDO INSERTA Note: All face frame plates are screw on. STEP 4: Adjust door for perfect fit. Lazy Susan / Blind Corner Cam Side adjustment Cam Height adjustment Cam Depth adjustment Turn screw on hinge to increase Rotate cam screw on plate to adjust Turn back screw on hinge to door overlay (4mm range) door position (4mm range)*. adjust door position (5mm)*. Kitchen / Bath Organizers Waste / Waste Recycle Entertainment *On non-cam mounting plates loosen screw(s), *On Clip Top hinges, loosen screw, Office / adjust door and retighten screws. adjust door and retighten screw. COMPACT Series Face Frame Hinges Shelf / Closet COMPACT 33 COMPACT 38N COMPACT 39C Decorative Small Wood, Overlays Large Overlays • 2 piece assembly Bar Rail / • Overlays Fittings Lighting 1 5 - Edge mount ⁄4" to 1 ⁄8" • 1 piece assembly • 1 piece assembly 3 3 3 9 - Face mount 1 ⁄8" + • Overlays from ⁄8" to ⁄4" • Overlays from 1" to 1 ⁄16" See page 336 See page 337 See page 338 STEP 1: Mount Hinge Levelers / COMPACT 33 - COMPACT 38N/39C - Casters Two Piece Hinges One Piece Hinges Fasteners / Mounting Plate HdweTable Adhesives Edgebanding Hinge and plates ordered seperately. Hinge STEP 2: Adjust door for perfect fit. Side adjustment possible on all COMPACT 38N and 39C have All COMPACT hinges are independ- COMPACT hinges except 38. series. cam depth adjustment. ently height adjustable on mount- COMPACT 38N/39C have cam side Abrasives / ing plates. Finishing adjustment. Blades Bits / Shop Tools / Shop Tools Festool HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 FAX: 800/207-0180 • www.hdlusa.com • 2020 305 299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 306 Volume Pricing Basic Hinges and Their Applications Available The Blum Concealed Hinge program is an extensive line of hinges for almost any cabinet door application. The hinges are made up of two parts, the hinge arm and the plate. Below you will see hinge arm and plate combinations for the most common applications in the three most popular opening angles. Other non-standard applications such as blind corner, thick door and bi-fold door are also available. See these and more on pages 318-322 Hinge Arm Styles Mounting Opening Angles Standard Boring Pattern Straight Screw On Hinge cup = 35mm Locks / CatchesArm Hinges Knobs / Pulls Half Depth = 13mm (1/2") Cranked Door Bore distance B=5mm (3/16") door Arm 35 Center point C = 22.5mm (7/8") 170˚ (Applies to 5/8" & 3/4" thick doors) B Degree C 120˚ Opening 110˚ Blind Corner Slides Lazy Susan / Frameless Cabinet Mounting Plates Face Frame Cabinet Mounting Plates 9mm Organizers 0mm Inset Kitchen / Bath 3mm Recycle Waste / Waste Frameless Cabinet Construction Office / Entertainment 5/8" (16mm) Overlay 1/4" (6.5mm) Twin Overlay Doors Inset half cranked arm straight arm half cranked arm Closet Shelf / 0mm 0mm 9mm plate plate plate Side Panel Wood, Decorative Door Hinge B071T3550 page 311 Hinge B071T3650 page 311 Hinge B071T3650 page 311 110˚ Plate B175H710 page 328 110˚*Plate B175H910 page 328 110˚ Plate B175H719 page 328 Fittings Bar Rail / Hinge B071T5550 page 314 Hinge B071T5650 page 314 Hinge B071T5650 page 314 120˚ Plate B175H710 page 328 120˚*Plate B175H910 page 328 120˚ Plate B175H719 page 328 Hinge B071T6550 page 316 Hinge B071T6650 page 316 Hinge B071T6650 page 316 170˚ Plate B175H710 page 328 170˚*Plate B175H910 page 328 170˚ Plate B175H719 page 328 Note: 110˚ also available w/ built in soft-close - pg 310 *Twin application screw required, see page 315 Note: 110˚ also available w/ built in soft-close - pg 310 Casters Lighting Levelers / Face Frame Cabinet Construction 1/2" (13mm) Overlay Inset Pricing & All Hinge Table Hdwe Table Fasteners / Applications straight arm half cranked arm 9/16” Pages 307-327 display many 3mm face 9mm inset styles of hinges for numerous frame plate plate applications. Pages include detailed specifications. Door 110˚ Hinge B071T3550 page 311 110˚ Hinge B071T3650 page 311 Pages 328 & 329 show the full Plate B175L6030.21page 329 Plate B175H5030.21 page 329 line of mounting plates. Hinge B071T5550 page 314 Hinge B071T5650 page 314 Finishing Edgebanding120˚ Adhesives 120˚ Abrasives / Plate B175L6030.21page 329 Plate B175H5030.21 page 329 If you need help, feel free Hinge B071T6550 page 316 Hinge B071T6650 page 316 to call our hinge experts at 170˚ Plate B175L6030.21page 329 170˚ Plate B175H5030.21 page 329 1-800-383-1009 Bits / Blades OBSERVATION NOTE: Moving from a straight arm hinge to a half cranked hinge or increasing the mounting plate height causes the door to move Festool towards the inside of the cabinet reducing the overlay. See charts detailing the overlay of arm/plate combinations on page 304 Shop Tools / Shop Tools HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 306 FAX: 800/207-0180 • www.hdlusa.com • 2020.
Load more

Recommended publications
  • Full Catalog Euro & Framed Series Cabinetry
    Full Catalog Euro & Framed Series Cabinetry www.harbordistributors.com Harbor Distributors, Inc. 3751 62nd Avenue N Pinellas Park, FL 33781 Ph: 727.539.1517 Fx: 727.539.1531 [email protected] TABLE OF CONTENTS **Click category headings to go to that section. Click our logo to go back to contents.** 1. Quick Reference • Reference and tips from HDI .................................................................................................1.02-1.03 2. Kitchen at a Time Program • Ordering Process..................................................................................................................................2.02 • Order Lead Times..................................................................................................................................2.03 • Order Pick-Up Procedures...................................................................................................................2.04 • Shipping Program........................................................................................................................2.05-2.06 • Display Program ...................................................................................................................................2.07 3. HDI Euro Series • In Stock Door Styles...............................................................................................................................3.02 • Standard Product.........................................................................................................................3.03-3.04
    [Show full text]
  • Construction & Material Testing Standards
    CONSTRUCTION & MATERIAL TESTING STANDARDS (2017) FOR KITCHEN CABINETS AND VANITIES Our certificate and seal of compliance is the best way to ensure your potential clients know that they can trust you. CERTIFICATION MARK Certification will be awarded upon completion and passing of all requirements outlined in the standard. Once approval is granted, the manufacturer will be allowed to display the CKCA “Quality Assured” logo on the product, as well as eligible company media (e.g. brochures, website, and cabinets). TABLE OF CONTENTS 1.0 sCOpe ...................................................................................................................................................... 4 1.1 General ............................................................................................................................................ 4 2.0 terms & definitiOns ........................................................................................................................... 5 2.1 General Terms .................................................................................................................................. 5 2.2 Finishing Definitions .......................................................................................................................... 5 2.3 Construction Terms ........................................................................................................................... 7 3.0 GenerAL reQUirements & AppeArAnCe .........................................................................................
    [Show full text]
  • Executive and Simplicity Frameless Cabinetry Features and Construction Details
    Executive and Simplicity Frameless Cabinetry Features and Construction Details Frameless Cabinetry: • Frameless construction with full overlay doors and drawers. • Wall cabinets are 12” deep, base cabinets are 24” deep as standard. Warranty: • Limited Lifetime Warranty Cabinet Construction: • 3/4” CARB 2 birch plywood, or ¾” low emission particle board, is used for all structural cabinet components except the back, which is a matching fully captured ¼” panel. • All Panels are joined using wooden dowel and glue construction method, with screws and biscuit joints where the method is practical, (range hoods, some corner cabinets, face frames). • Center stiles are standard on wall, base and tall cabinets 39” and wider and will match the door face (edges will match the cabinet interior). • Mounting rails are dowelled into the back of the cabinet for added stability. • Finished side panels are 3/4” maple melamine interiors and wood veneer exteriors. Cabinet Tops and Bottoms: • 3/4” CARB 2 birch plywood, or ¾” low emission particle board, doweled and glued into the side panels. No tops on base and vanity cabinets. • Bottom panels are 3/4” CARB 2 birch plywood, or ¾” low emission particle board Shelf Construction: • Shelves are 3/4” and match the cabinet interior on top and bottom surfaces and front edge banded edge. They are adjustable every 32mm using 5mm metal pin system. • Wall and Tall cabinets have full depth adjustable shelves. • Base and vanity cabinets have a 14 7/8” deep adjustable shelves. Drawer Construction: • Drawer front, back and sides are 5/8” solid birch. Drawer bottom is 1/4” thick. The drawer sides are dovetailed and glued.
    [Show full text]
  • Macarthur Pewter Glaze Shaker Dove Grey Melvern Espresso
    Shaker Dove Grey Melvern Espresso MacArthur Pewter Glaze Woodmark knows Pros. Rely on the experts. We know that every Pro is different, and every Pro project requires different resources. Our versatile cabinetry lines of We also know that two of the most Hampton Bay, Hampton Bay important criteria for you when buying are Designer Series and Woodmark everyday low prices that do not depend on PRO give you the style, prices limited promotions and timing. You know a and construction you need to good deal when you see one, which is why get your specific job done, and our PROfolio™ program offers one of the best—including a complete line of offerings done right. at exclusive everyday low prices and options for easy delivery. Features of our PROfolio program: • Plywood construction available in Woodmark PRO® • A guaranteed deliver-by date with American Woodmark PROXpress™ • Jobsite delivery • Volume discounts available • Best-in-class service 1 Hampton Bay Collections Hampton Bay Construction Shaker Wall Cabinets 1 6 1 Top/Bottom Panels: 3/8" engineered wood fully encapsulated in the face frame, back and side panels. 2 Face Frame: Pocket screw construction with 3/4" 3 thick, 1½" wide material. 3 Back Panel: Full 3/8" back panel fully encapsulated into top and bottom panels for strength. 4 Interiors: Natural maple laminate finish on engineered wood. 5 Shelves: 3/4" thick adjustable shelves with metal 8 5 shelf pins. 6 Hinges: Fully concealed and adjustable. 4 Brindle Dove Gray RTF Java Satin White RTF 7 End Panels: Finished cabinetry – 1/2" engineered 7 • Full overlay • Full overlay • Full overlay • Full overlay wood with laminated exterior to match cabinet finish.
    [Show full text]
  • A Trusted Brand with a Frameless Appeal 2 Welcome to a World of Options
    A TRUSTED BRAND WITH A FRAMELESS APPEAL 2 WWW.THOMASVILLECABINETRY.COM WELCOME TO A WORLD OF OPTIONS THE WORLD OF THOMASVILLE CABINETRY®. Whether the space is a small urban loft in need of more storage space, or a large suburban kitchen designed to entertain, you need a trusted brand of cabinets that will deliver. Thomasville Nouveau™ cabinetry offers just that. Featuring frameless construction, Thomasville Nouveau gives you unobstructed access to more space than ever before. With styles and finishes that are edgy and on trend with today’s latest designs to more transitional styling for comfortable easy living, Thomasville has a solution to meet your needs, respect your budget and exceed your expectations. LIVING IN THOMASVILLE HAS NEVER BEEN EASIER. THE VALUE OF THOMASVILLE 3 4 WWW.THOMASVILLECABINETRY.COM LAKEFIELD MAPLE GYPSUM & PEBBLE Available in cherry, maple, oak, rustic alder and rift oak. Full overlay, recessed center panel door, standard 5-piece drawer front. NOUVEAU 5 JULES ACRYLIC INDIGO METALLIC AND TALLOW Available in cherry, maple, oak, rift oak, white oak, bamboo, MDF, and acrylic. Full overlay, slab door, standard slab drawer front. 6 WWW.THOMASVILLECABINETRY.COM CARLISLE HORIZONTAL MELAMINE WOODGRAIN TEXTURED TWEED NOUVEAU 7 SCOTIA MAPLE WISTERIA Available in cherry and maple. Full overlay, mitered, recessed center panel door, standard 5-piece drawer front. 8 WWW.THOMASVILLECABINETRY.COM NOUVEAU 9 10 WWW.THOMASVILLECABINETRY.COM BRUNSWICK MAPLE GROTTO Available in cherry, maple, rustic alder and rift oak. Full overlay, wide rail, recessed center panel door, standard 5-piece drawer front. NOUVEAU 11 CROSSE HIGH GLOSS THERMOFOIL GLOSS LILLY Available in high gloss thermofoil.
    [Show full text]
  • HOLIDAY KITCHENS FRAMELESS CABINET SPECIFICATIONS Box
    HOLIDAY KITCHENS FRAMELESS CABINET SPECIFICATIONS Box Construction 3/4” thick sides, tops & bottoms 8mm wood dowels hold tops & bottoms between sides 1/4" backs glued into grooves in the sides, tops & bottom. Hanging System 2 13/16” wide x 1/2" thick hanger strips Wall cabinets have hanger strips at top & bottom Base cabinets have one hanger strip at top Optional: European J-Channel or J-Track Track hanging system Wall Cabinets 12"D Visible edges on tops & bottoms of sides banded to match finish Front edges banded to match doors Base Cabinets 24" D | 3/4" thick front & back top rails Front edges banded to match doors Shelves Full depth / adjustable 3/4” thick w/ front edge banded to match interior Doors and Drawer Fronts for Frameless In addition to solid wood doors, Holiday Kitchens offers non-wood door styles Wood Veneered Exotic Solid Real Woods Laminate Rigid Thermofoil | Hi Gloss Rigid Themrofoil | 5-Pc Rigid Thermofoil Five-Piece Thermofoil Metal Acrilux Acrylic Drawer Box Options for Frameless Same as Framed Construction Tandembox Drawer & Roll Out for Frameless Only Double-walled gray epoxy powdercoated metal sides 5/8” thick bottom & back Particleboard w/ gray melamine applied Drawer front attached to sides. Adjustable horizontally & vertically Full extension self closing w/ soft close guides Material Options for Frameless Construction **All Material Options Available w No Added Formaldehyde** White Melamine Particle board cabinet box w/ PVC edge banding White Melamine Interiors & cabinet bottoms Natural Maple Melamine Particle board cabinet box w/ PVC banding Natural Maple Melamine interiors & Natural Maple wall cabinet bottoms Plywood Premium plywood box construction w/ PVC edge banding Finished Natural Maple Veneer interiors.
    [Show full text]
  • Reflect Your Personality Baths 26
    www.imprezzacabinets.ca Kitchens 4 reflect your personality Baths 26 Axesso Organization 30 Your preferences are as different as your fingerprint. Think about the Embellishments 34 recipes you love or the clothes that look just right on you. Imprezza Construction 38 extends its choices to match your personality. From quiet to bold, we Door Styles 42 have a style for you. Finishes 46 confident Self-assurance in the kitchen starts with a work space guaranteed to exceed expectations. When function and beauty collide, the results are astounding. Maddock offers crisp lines for a new take on shaker styling, and pairing linear elements adds a strong statement of confidence. In a work space with a can- do attitude, who knows what your next kitchen creation will be! Maddock Maple Winter and Thunder 5 The well-mannered kitchen—everyone’s favourite gathering spot—is now very practical, quite glamorous, and a dream for hosting, cooking and entertaining. Our Tequila stain with Peppercorn Glaze wraps this clever use of space in mellow warmth, a subtle complement to chic grays. tasty Mouldings are a feast for glaze lovers. Carrington’s rich, raised-panel goodness mixes with the spicy elegance of Tequila with Peppercorn for artistic depth, touches of heat, and a fresh look. The fine black glaze deepens the gentle colour of the finish. Yummy. Traditional or transitional, Carrington is available on Alder, Cherry and Maple. 6 Carrington Cherry Tequilla Peppercorn easygoing Surprisingly friendly, opaque finishes define a space, complementing both modern details and traditional conveniences. Black creates instant lines and shapes a space visually.
    [Show full text]
  • Profolio Brochure
    Shaker Dove Grey Melvern White Westerly Maple Rye & Painted Linen Woodmark knows Pros. Rely on the experts. We know that every Pro is different, and every Pro project requires different resources. Our versatile cabinetry lines of We also know that two of the most Hampton Bay, Hampton Bay important criteria for you when buying are Designer Series and Woodmark everyday low prices that do not depend on PRO give you the style, prices limited promotions and timing. You know a and construction you need to good deal when you see one, which is why get your specific job done, and our PROfolio™ program offers one of the best—including a complete line of offerings done right. at exclusive everyday low prices and options for easy delivery. Features of our PROfolio program: • Plywood construction available in Woodmark PRO® • A guaranteed deliver-by date with American Woodmark PROXpress™ • Jobsite delivery • Volume discounts available • Best-in-class service 1 Hampton Bay Collections Hampton Bay Construction Shaker Wall Cabinets 1 6 1 Top/Bottom Panels: 3/8" engineered wood fully encapsulated in the face frame, back and side panels. 2 Face Frame: Pocket screw construction with 3/4" 3 thick, 1½" wide material. 3 Back Panel: Full 3/8" back panel fully encapsulated into top and bottom panels for strength. 4 Interiors: Natural maple laminate finish on engineered wood. 5 Shelves: 3/4" thick adjustable shelves with metal 8 5 shelf pins. 6 Hinges: Fully concealed and adjustable. 4 Brindle Dove Gray RTF Java Satin White RTF 7 End Panels: Finished cabinetry – 1/2" engineered 7 • Full overlay • Full overlay • Full overlay • Full overlay wood with laminated exterior to match cabinet finish.
    [Show full text]
  • Frameless Cabinets
    FRAMELESS CABINETS Frameless Construction 8 6 !0 5 9 !1 1 4 2 4 5 1 2 3 7 1 Hinges – Frameless, fully concealed 7 Toe kick support – 5/8" Particleboard 2 End Panels – 5/8" particleboard 8 Corner Blocks – Triangular Nylon 3 Base Bottoms – 5/8" particleboard 9 Drawer Guides – Epoxy, 75lb capacity 4 Shelves – 5/8" particleboard, wall and base adj !0 Drawer Box – 1/2" particleboard 5 Wall Tops/Bottoms – 5/8" particleboard !1 Drawer Bottom – 1/8" hardboard 6 Backs – 1/8" hardboard 15167 Business Ave republicelite.com Addison, TX 75001 (972) 606-9667 office c /republicelitemultifamilyinteriors (972) 735-0934 fax i /company/republicelite [email protected] f /republicelitemf FRAMELESS CABINETS Frameless Door Styles Manhattan St. Barts Shaker-TF Slab thermofoil door with Slab thermofoil door Shaker style rounded edge profile. with 45 degree front thermofoil door Slab drawer head. bevel edge profile. with recessed (Beach Linen shown) Slab drawer head. panel look. (Matte White shown) Slab drawer head. (Matte White shown) Key West Shaker - Maple Peyton - Maple Raised panel Shaker style maple Slab maple thermofoil door with mortise and tenon door veneered door 45 degree front bevel with 2” wide door rail. with square edge. edge profile. Slab drawer head. Slab drawer head. Slab drawer head. (Cinnamon shown) (Cinnamon shown) (Slate shown) Aspen Flat melamine laminate 5/8” particleboard door with square edge, and hot air edge banding. Slab drawer head. (High Gloss White shown) Note: Variation in color and grain may differ from actual product. 15167
    [Show full text]
  • Architectural Woodwork Standards, 2Nd Edition
    Architectural Woodwork Standards CASEWORK 10S E C T I O N SECTION 10 Casework table of contents INTRODUCTORY INFORMATION Cabinet and Door Interface Style Terminology ...................................288 Guide Specifications ...........................................................................284 Flush Overlay ...............................................................................288 Introduction .........................................................................................285 Overlay .........................................................................................288 Casework Categories ..........................................................................285 Face Frame Construction .............................................................288 Wood Casework ...........................................................................285 Flush Inset ....................................................................................288 Decorative Laminate Casework ...................................................285 Layout Requirements of Grained or Patterned Faces by Grade .........289 Solid Phenolic Casework ..............................................................285 Stile and Rail ................................................................................289 Contract Documents ...........................................................................285 Flush Panel ..................................................................................289 Design Professional’s Responsibility
    [Show full text]
  • Homecrest Cabinetry's Design Checklist
    LIMITED LIFETIME WARRANTY Homecrest Cabinetry® is a certified brand in the Kitchen Cabinet Manufacturers Association (KCMA) Environmental Stewardship Program. The program recognizes companies that demonstrate an ongoing commitment to environmental practices and sustainability. SPECIFICATIONS GUIDE SPECIFICATIONS VISIT US AT: HOMECRESTCABINETRY.COM All orders taken are subject to approval by Homecrest and, after acceptance, are not subject to change without our consent. Homecrest carefully inspects and packages all merchandise and will ship via the best transportation facility available as it determines. Any claim for transportation damage must be handled with the carrier. No merchandise returns to Homecrest Cabinetry without prior written approval. Styles, product availability and construction may vary slightly from those shown in this book due to material availability and/or design evolution. Specifications are subject to change without notice. Customer service is available if your design requires verification of product availability and specifications. Prices effective 1.2.2019 MBCI Customer Service Operating Hours: Mon-Fri, 8:00AM – 6:00PM EST MBCI Customer Service Phone: 1.855.722.2148 MBCI Customer Service Fax: 1.800.737.1500 Designer ID#: Customer Account #: Sales Rep: homecrestcabinetry.com #homecrestcabinetry SPECIFICATIONS GUIDE © 2019 MasterBrand Cabinets, Inc. HCPRSPEC0119 2018-10/WDS/6.9M Dear Homecrest® Partner: Our January 2019 Product Launch will deliver continuous improvement changes that affect touch points throughout Homecrest’s
    [Show full text]
  • Understanding Concealed Hinges & Program
    Clip Top Understandinghinges for frameless Concealed and Hinges & Program face frame construction. Clip Tab • Snap to attach door pull up to release Because of appearance, function and 6-way independent adjustability European concealed hinges are now the industry Depth adjustment standard for cabinet doors. Blum’s Clip Top hinge design also In and out. gives the added advantage of easy door attachment and removal. • With Spiral-Tech depth adjustment, just one and three quar- Hinge ter revolutions of the screw creates 5mm of adjustment with- Arm out loosening and retightening a fixing screw. • Side adjustment is a flush screwhead that allows 4mm of Side to Side adjustment. It also has an integral stop that prevents removal. Adjustment • Height adjustment is accomplished on the mounting plate with a range of +/- 2mm.removal. Hinge • For door thickness greater than 22mm a trial application is Cup recommended or use the Thick door hinge Frameless Clip Mounting Plate Face Frame Clip Mounting Plate NOTE: For economical Allows for face frame alternative face frame con- applications for cealed hinge, see compact all clip top hinges. Height Adjustment series hinges on next page. Height Adjustment Basic Hinge Options Basic Mounting Plate Options Hinges per Door Frameless Face Frame 9/16 0mm 9mm Straight Arm Half Cranked Arm Also available in 3mm and 6mm. Overlay Full Inset Basic Hinge and Plate Combinations Frameless Construction Face Frame Construction straight arm half cranked arm half cranked arm straight arm half cranked arm 9/16” 0mm plate 0mm plate 9mm plate 0mm face frame plate 9mm inset plate Side Panel Side Panel Door Door Door Full Overlay Half Overlay Full Inset Full Overlay, Face Frame Full Inset, Face Frame STEP 1: Install door using one of the four hinges, each with their own attachment method.
    [Show full text]