299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 304 Understanding Concealed Hinges & Program CLIP top hinges for frameless and face frame construction. CLIP Tab Because of appearance, function and 6-way independent adjustability • Snap to attach door pull up to release European concealed hinges are now the industry standard for cabinet doors. Blum’s Clip Top hinge design also gives the added advantage of easy Depth adjustment door attachment and removal. In and out. • With Spiral-Tech depth adjustment, just one and three quarter revolu- tions of the screw creates 5mm of adjustment without loosening and Locks / Catches Hinges Knobs / Pulls Hinge retightening a fixing screw. Arm • Side adjustment is a flush screwhead that allows 4mm of adjustment. It also has an integral stop that prevents removal. Side to Side • Height adjustment is accomplished on the mounting plate Adjustment with a range of +/- 2mm. • For door thickness greater than 22mm a trial application is recommended or use the Thick door hinge (see pages 318-319) Hinge Cup Blind Corner Slides Lazy Susan / Frameless CLIP Mounting Plate Face Frame CLIP Mounting Plate Organizers Kitchen / Bath NOTE: For econom- Allows for face frame ical alternative face applications for Recycle frame concealed Waste / Waste all CLIP top hinges. hinge, see compact Height Adjustment Height Adjustment series hinges on next page. Office / Entertainment Basic Hinge Options Basic Mounting Plate Options Hinges per Door Frameless Face Frame Closet Shelf / 9/16 Wood, Decorative 0mm 9mm Fittings Bar Rail / Straight Arm Half Cranked Arm Also available in 3mm and 6mm. Overlay Full Inset Basic Hinge and Plate Combinations Frameless Construction Face Frame Construction half cranked straight half cranked half cranked Casters Lighting arm arm Levelers / arm straight arm arm 0mm 0mm 9mm 0mm face frame 9/16” 9mm inset plate plate plate plate plate Table Hdwe Table Side Panel Fasteners / Side Panel Door Door Door Full Overlay Half Overlay Full Inset Full Overlay, Face Frame Full Inset, Face Frame STEP 1: Install door using one of the four hinges, each with their own attachment method. Screw-on Press-in EXPANDO INSERTA Finishing Edgebanding Adhesives Abrasives / Bits / Blades Pre-attached expanding Depressing cover expands cup Use #6 wood screws. Pre-attached 8mm dowels, dowels. Pre-bore with for tool-free mounting. Pre- installed with Blum MINIPRESS. MINIPRESS. bore with MINIPRESS. Festool Continued on next page Shop Tools / Shop Tools HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 304 FAX: 800/207-0180 • www.hdlusa.com • 2020 299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 305 Call for volume pricing. (Cont.) For Non-Stock items see page 12 Concealed Hinges Knobs / Pulls Hinges STEP 2: Install mounting plate using STEP 3: Attach door to cabinet with one of three attachment methods. clip mechanism. Catches Slides Locks / *Screw-On EXPANDO INSERTA Note: All face frame plates are screw on. STEP 4: Adjust door for perfect fit. Lazy Susan / Blind Corner Cam Side adjustment Cam Height adjustment Cam Depth adjustment Turn screw on hinge to increase Rotate cam screw on plate to adjust Turn back screw on hinge to door overlay (4mm range) door position (4mm range)*. adjust door position (5mm)*. Kitchen / Bath Organizers Waste / Waste Recycle Entertainment *On non-cam mounting plates loosen screw(s), *On Clip Top hinges, loosen screw, Office / adjust door and retighten screws. adjust door and retighten screw. COMPACT Series Face Frame Hinges Shelf / Closet COMPACT 33 COMPACT 38N COMPACT 39C Decorative Small Wood, Overlays Large Overlays • 2 piece assembly Bar Rail / • Overlays Fittings Lighting 1 5 - Edge mount ⁄4" to 1 ⁄8" • 1 piece assembly • 1 piece assembly 3 3 3 9 - Face mount 1 ⁄8" + • Overlays from ⁄8" to ⁄4" • Overlays from 1" to 1 ⁄16" See page 336 See page 337 See page 338 STEP 1: Mount Hinge Levelers / COMPACT 33 - COMPACT 38N/39C - Casters Two Piece Hinges One Piece Hinges Fasteners / Mounting Plate HdweTable Adhesives Edgebanding Hinge and plates ordered seperately. Hinge STEP 2: Adjust door for perfect fit. Side adjustment possible on all COMPACT 38N and 39C have All COMPACT hinges are independ- COMPACT hinges except 38. series. cam depth adjustment. ently height adjustable on mount- COMPACT 38N/39C have cam side Abrasives / ing plates. Finishing adjustment. Blades Bits / Shop Tools / Shop Tools Festool HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 FAX: 800/207-0180 • www.hdlusa.com • 2020 305 299-309 hdl_c025-32 - 2004 3/2/20 10:35 AM Page 306 Volume Pricing Basic Hinges and Their Applications Available The Blum Concealed Hinge program is an extensive line of hinges for almost any cabinet door application. The hinges are made up of two parts, the hinge arm and the plate. Below you will see hinge arm and plate combinations for the most common applications in the three most popular opening angles. Other non-standard applications such as blind corner, thick door and bi-fold door are also available. See these and more on pages 318-322 Hinge Arm Styles Mounting Opening Angles Standard Boring Pattern Straight Screw On Hinge cup = 35mm Locks / CatchesArm Hinges Knobs / Pulls Half Depth = 13mm (1/2") Cranked Door Bore distance B=5mm (3/16") door Arm 35 Center point C = 22.5mm (7/8") 170˚ (Applies to 5/8" & 3/4" thick doors) B Degree C 120˚ Opening 110˚ Blind Corner Slides Lazy Susan / Frameless Cabinet Mounting Plates Face Frame Cabinet Mounting Plates 9mm Organizers 0mm Inset Kitchen / Bath 3mm Recycle Waste / Waste Frameless Cabinet Construction Office / Entertainment 5/8" (16mm) Overlay 1/4" (6.5mm) Twin Overlay Doors Inset half cranked arm straight arm half cranked arm Closet Shelf / 0mm 0mm 9mm plate plate plate Side Panel Wood, Decorative Door Hinge B071T3550 page 311 Hinge B071T3650 page 311 Hinge B071T3650 page 311 110˚ Plate B175H710 page 328 110˚*Plate B175H910 page 328 110˚ Plate B175H719 page 328 Fittings Bar Rail / Hinge B071T5550 page 314 Hinge B071T5650 page 314 Hinge B071T5650 page 314 120˚ Plate B175H710 page 328 120˚*Plate B175H910 page 328 120˚ Plate B175H719 page 328 Hinge B071T6550 page 316 Hinge B071T6650 page 316 Hinge B071T6650 page 316 170˚ Plate B175H710 page 328 170˚*Plate B175H910 page 328 170˚ Plate B175H719 page 328 Note: 110˚ also available w/ built in soft-close - pg 310 *Twin application screw required, see page 315 Note: 110˚ also available w/ built in soft-close - pg 310 Casters Lighting Levelers / Face Frame Cabinet Construction 1/2" (13mm) Overlay Inset Pricing & All Hinge Table Hdwe Table Fasteners / Applications straight arm half cranked arm 9/16” Pages 307-327 display many 3mm face 9mm inset styles of hinges for numerous frame plate plate applications. Pages include detailed specifications. Door 110˚ Hinge B071T3550 page 311 110˚ Hinge B071T3650 page 311 Pages 328 & 329 show the full Plate B175L6030.21page 329 Plate B175H5030.21 page 329 line of mounting plates. Hinge B071T5550 page 314 Hinge B071T5650 page 314 Finishing Edgebanding120˚ Adhesives 120˚ Abrasives / Plate B175L6030.21page 329 Plate B175H5030.21 page 329 If you need help, feel free Hinge B071T6550 page 316 Hinge B071T6650 page 316 to call our hinge experts at 170˚ Plate B175L6030.21page 329 170˚ Plate B175H5030.21 page 329 1-800-383-1009 Bits / Blades OBSERVATION NOTE: Moving from a straight arm hinge to a half cranked hinge or increasing the mounting plate height causes the door to move Festool towards the inside of the cabinet reducing the overlay. See charts detailing the overlay of arm/plate combinations on page 304 Shop Tools / Shop Tools HARDWARE DISTRIBUTORS LTD.SM • Phone: 800/383-1009 306 FAX: 800/207-0180 • www.hdlusa.com • 2020.