Adaptive Technology CATALOG
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
PUNCHES and CHISELS Punches and Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
PUNCHES AND CHISELS Punches and Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. PPC250BK Punch and Chisel Set. PPC100AK Punch and Chisel Set. ncludes 24 pcs. in KB2179 kit bag: Includes 10 pcs. in KB2175 kit bag: PPC1A PPC106A PPC205A PPC820B PPC812B PPC828B PPC15B PPC3A PPC108A PPC206A PPC824B PPC816B PPC12B PPC19B PPC250BK PPC4A PPC110A PPC208A PPC12B PPC820B PPC13B PPC103A PPC112 PPC210A PPC14B PPC824B PPC14B PPC104A PPC203A PPC812B PPC15B PPC100AK PPC105A PPC204A PPC816B PPC19B PPCD70BK Punch and Chisel Set. PPC210BK Punch and Chisel Set. Includes 7 pcs. in KB2183 kit bag: Includes 22 pcs. in KB2178 kit bag: PPC103A PPC106A PPC110A PPC1A PPC105A PPC204A PPC816B PPC104A PPC107A PPC5A PPC106A PPC205A PPC820B PPC105A PPC108A PPC3A PPC108A PPC206A PPC824B PPC210BK PPC4A PPC110A PPC208A PPC828B PPC103A PPC112 PPC210A PPCD70BK PPC104A PPC203A PPC812B PPCS60BK Punch and Chisel Set. Includes 6 pcs. in KB2185 kit bag: PPC715BK Punch and Chisel Set. PPC203A PPC205A PPC208A Includes 16 pcs. in KB2182 kit bag: PPC204A PPC206A PPC210A PPC1A PPC104A PPC203A PPC208A PPC3A PPC105A PPC204A PPC812B PPC4A PPC106A PPC205A PPC816B PPC715BK PPC103A PPC108A PPC206A PPC820B PPCS60BK PPC50AK Punch and Chisel Set. -
Genuine Brunswick Parts Catalog 2021
2021-2022 GENUINE BRUNSWICK HARD WORKING PRODUCTS SINCE 1890 TABLE OF CONTENTS Section 1 – GS Pinsetter Parts GS Featured Products....................................................................................... 4 Elevator.................................................................................................... 6 Transport Band Assembly................................................................................... 8 Setting Table . 10 Ball Cushion and Pit Curtain . 14 Sweep Wagon .............................................................................................16 Drive Frame Assembly .....................................................................................18 Distributor.................................................................................................20 Ball Accelerator ...........................................................................................26 Electrical box ..............................................................................................28 Tools and Maintenance ....................................................................................30 Section 2 – A•2 Pinsetter Parts A•2 Featured Products.....................................................................................34 Mechanic Designed Products . 36 Gear box assembly.........................................................................................38 Detector assembly.........................................................................................48 Electronic Five -
Punches / Chisels the Anvil End on Heads of Snap-On® Punches and Chisels Are Machined to a Modified Parabolic Curve
Punches / Chisels The anvil end on heads of Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. Stock Hex Point/ Length Stock Hex Point/ Length No. Size, in. Edge, in. in. No. Size, in. Edge, in. in. Punch and Chisel Accessories PPC808A 1/4 1/4 5 Flat Chisels PPC1A — — 2 5/8 PPC812B 5/16 3/8 5 1/2 Chisel Gauge PPC816B 7/16 1/2 6 PPC5A — — 6 15/16 PPC820B 1/2 5/8 6 1/2 PPC1A PPC5A Punch/Chisel Holder PPC824B 5/8 3/4 7 1/4 11 7 Center Punches PPC3A 5/16 1/8 5 PPC828B /16 /8 8 PPC832B 7/8 1 9 PPC4A 7/16 3/16 6 BPPC1878 7/8 1 9 PPC6B 5/8 5/16 7 PPC820LB 1/2 5/8 16 Long Flat Chisels PPC714B 9/16 5/32 14 Pin Punches PPC103A 9/32 3/32 4 7/32 PPC104A 5/16 1/8 4 3/4 PPC105A 3/8 5/32 5 3 3 1 PPC106A /8 /16 5 /4 PPC12B 3/8 5/16 6 Half Round Nose Cape PPC107A 3/8 7/32 5 1/4 PPC108A 7/16 1/4 5 3/4 Chisels PPC110A 1/2 5/16 5 1/4 PPC112 9/16 3/8 5 1/4 Starter Punches PPC203A 5/16 3/32 5 1/2 3 1 3 PPC204A /8 /8 5 /4 PPC13B 5/16 1/4 5 5/8 3 5 Cape Chisels PPC205A /8 /32 6 PPC14B 3/8 5/16 6 PPC206A 7/16 3/16 6 1/4 PPC208A 1/2 1/4 6 3/4 PPC210A 9/16 5/16 7 1/4 PPC15B 7/16 7/32 6 Diamond Point Chisels PPC19B 3/8 1/8 5 3/4 PPC250AK PPC250AK Punch and Chisel Set Includes the following 25 pcs. -
The Times They Are A-Changin'
www.machinery.co.uk January 2020 OVER A CENTURY OF MANUFACTURING TECHNOLOGY INSIGHT January 2020 Volume 178 Number 4292 MACH 2020 Statement Getting more facility opens comfortable in Sodick Europe’s its new home new UK HQ p14 p18 MACHINERY Profi ling Two fi rms fi re up UK fi rsts p31 www.machinery.co.uk THE TIMES THEY ARE A-CHANGIN’ THE LAST 12 MONTHS’ COVERAGE IN MACHINERY POINTS TO A DECADE OF CHANGE BREXIT unce rtainty? Let us take the worry out of the current situation for up to three years. Rent or finance a new XYZ Machine Tool with the ability to terminate the agreement and give it back after one, two or three years with NO penalty.* *Subject to status terms and conditions apply ProtoTRAK® ® ® Now with NEW XYZ ProtoTRAK XYZ ProtoTRAK XYZ 2-OP screen KMX Turret Mills RMX Bed Mills Mobile CNC touch 3 Models available. 750mm to 1,500 mm travel 4 Models available. XYZ Vertical Machining Centres 500mm to 10,000 mm travel 10 Models available. To learn more please call 01823 674200 MACHINE TOOL DEMOS ARE AVAILABLE AT ANY OF THE XYZ UK SHOWROOMS DEVON BLACKBURN NUNEATON SHEFFIELD & WITH EVERY NEW XYZ MACHINE TOOL YOU GET: ■ Proven quality & reliability with over 25,000 UK installations. BREXIT unce rtainty? ■ UK sales and service back-up. ■ Free CNC training. Don’t forget Manual or NC ■ Finance packages to suit. we still sell... ■ Part exchange. ■ Full warranty. ■ Extended warranties. ■ Nationwide service engineers. ■ Programming helplines. ■ Same day spares despatch. XYZ Manual Mills, Lathes and Grinders 780mm swing and 160 mm Spindle Bore ® ® XYZ ProTURN RLX Lathes XYZ ProTURN RLX 780 Lathe NEW 350mm to 780mm swing. -
Section 1 Class List Section 2 Class List
St Cloud Technical and Community College Medium/Heavy Truck Program Registration Guide Fall Semester 2020 Listed below are the classes that you should register for in fall semester. Unless denoted “optional” all classes listed for fall semester are required in order to advance to spring semester in the program. You may choose to register in Section 1 or Section 2. Sections fill on a “first come, first serve” basis. Register early to secure the optimal schedule for you. If you see a class listed, and believe that you’ve taken the class at a different institution, please review your DARS report in eServices to ensure that the class transferred to SCTCC to fulfill the program requirement. If it did not transfer, please register for the class as instructed. Instructions for how to access and interpret a DARS report can be found at the link provided in your welcome letter. Please refer to the registration access code provided in your welcome letter when registering for classes. Contact the Academic Advising Center at [email protected] with your questions about the class schedule or for assistance with registration. SECTION 1 CLASS LIST Course ID Course Name Course Number Section Credits 000042 General Service (1st half of semester) TRAN1503 3 3 000034 Elec. & Electronic Principles (1st half of TRAN1504 3 3 semester) 000049 Mobile Hydraulics (1st half of semester) MHTT1507 1 3 000055 Truck Electrical Systems (2nd half of semester) MHTT1522 1 2 000057 Truck and Trailer PM (2nd half) MHTT1526 1 3 000052 Transportation Haz Mat (full semester) TRAN1518 3 1 *000550 Stretch Analytical Writing I (full semester) ENGL1308 3 3 Total Credits 18 SECTION 2 CLASS LIST Course ID Course Name Course Number Section Credits 000043 General Service (1st half of semester) TRAN1503.04 4 3 000034 Elec. -
Promotion Valid from 1St June to 31St August 2020
Promotion valid from 1st June to 31st August 2020 2020 Promotion WORKSHOP BENCH GRINDERS SEE PAGE 4 SAVE UP TO 51% OFF LIST PRICE! NEW MAGNETIC RECEIVE A FREE ITEM DRILLS WITH SELECTED PRODUCTS! SEE PAGE 3 ® Pillar Drills View our full range of Pillar Drills online at www.sealey.co.uk Bench Pillar Drills Floor Pillar Drills (GDM140F, (GDM50B & GDM120B) GDM160F & GDM200F) • Suits light industrial, agricultural and • 16mm(5/8") Capacity chuck No. MT2. woodworking applications. • Fitted with no-load voltage switch and locking • Fitted with rack and pinion feed cover to prevent accidental starting. SAVE UP TO shafts with adjustable preset depth control for repetitive work. £275 OFF LIST Model No. Model No. GDM120B GDM140F Fitted with safety switch. Chuck No. of Spindle to Spindle Overall Model No. Motor Power List Price Exc. VAT Inc. VAT Size Speeds Centre Column Travel Height GDM50B 16mm 5 127mm 60mm 750mm 220W(370W) £342.95 £219.95 £263.94 GDM120B 16mm 16 165mm 80mm 960mm 350W(550W) £469.95 £299.95 £359.94 GDM140F 16mm 12 127mm 60mm 1500mm 220W(370W) £449.95 £269.95 £323.94 GDM160F 16mm 16 165mm 80mm 1580mm 350W(550W) £535.95 £349.95 £419.94 Enter our competition at www.sealey.co.uk/competitions. Competition closes 30th September 2020. GDM200F 16mm 16 178mm 80mm 1630mm 450W(650W) £664.95 £389.95 £467.94 Drill Bit Sharpener Bench Mounting Drill Bit Table/Workbench Grinding Sharpener C-Clamp with Attachment Swivel Foot • Provides quick and precise sharpening of 3-19mm(1/8-3/4") HSS twist drill bits. -
A Catalog of Performance Objectives, Performance Conditions, and Performance Guides for Machine Tool Operations
DOCUMENT RESUME ED 235 377 CE 037 295 AUTHOR Stadt, Ronald; And Others TITLE A Catalog of Performance Objectives, Performance Conditions, and Performance Guides for Machina Tool Operations. INSTITUTION Illinois State Board of Education, Springfield. Dept. of Adult, Vocational and Technical Education.; Southern I,11inois Univ., Carbondale. Dept. of Vocational Education Studies. PUB DATE Oct 83 NOTE 325p. PUB TYPE Guides Non-Classroom Use (055 EDRS PRICE MF01/PC13 Plug Postage. DESCRIPTORS *Behavioral Objectives; *Equipment; *Evaluation Criteria; Hand Tools; Job Analysis; Machinery Industry; *Machine Tool Operators; Machine'Tools; *Machinists; Metal Working; *Occupational Information; Performance Factors; Performance Tests; Postsecondary Education; Secondary Education; Specifications; Task Analysis; Vocational Education ABSTRACT This catalog provides performance objectives, tasks, standards, and performance guides associated with current occupational information relating to the job content of machinists, specifically tool grinder operators, production lathe operators, and production screw machine operators. The catalog if; comprised of 262 performance objectives, tool and equipment lists, and performance guides that were prepared from job-related task statements from the occupational inventory. Each performance objective contains the condition under which the student will perform the objective, the performance required of the worker in the job environment, and a job-relevant standard for measuring successful performance of the objective. The source of the standard for each objective is - documented. Tha tool and equipment list includes the required tools and equipment for completing the performance guides. 'Accessories included are the necessary tools and machinery parts used with a basic machine. The performance guides that accompany the tasks provide proceducal steps identified as subordinate to task performance. -
Everything Is on Sale! Thurs 16Th to Sat 18Th
Australian owned & operated since 1930 “Setting the standard for Quality & Value” Metal Sheet Metal Wood Cutting Machine Tool Measuring Workshop Lifting School & TAFE Working Fabrication Working Tools Accessories Equipment & Automotive Handling Equipment VJ-680 NOTCHER ATTACHMENT Hydraulic Vehicle PACKAGE DEAL EXTENDED FREE Positioning Jacks SAUSAGE TRADING! Order Code: A332 $ 229 Pipe & +HSS SAVE $46 Tube Hole Saw Refer page 2 Notcher Set (D102) SAVE Attachment (P090) Order Code K4010 SATURDAY TH SOLD 16% $ 18 NOV SIZZLE! IN PAIRS off RRP 176 SAVE $66 Refer page 16 TIL 4PM! ONLINE OR IN STORE THURS 16TH DAY SALE TO SAT 18TH 3 EVERYTHING IS ON SALE! NOVEMBER 2017 WELDING PACKAGE DEAL GSP-795 NEW Pneumatic PACKAGE DEALS Round SAVE Padded DIGITAL READOUT & SCALES Order Code: K019 19% + Stool off RRP $499 SAVE $84 Order Code: A359 Multi-Function Digital $ Readout & Scales VIPER 150 Multi-Function Gasless Flux Core MIG 89 Suits lathes & mills SAVE $21 Inverter Welder-MIG-MMA Ø0.8mm Welding Wire Refer page 21 (W245) (W145) Refer page 2 Digital Calipers - 150mm / 6” TiGer 2000S Metric, Inch & Fraction Wetstone Grinder NEW Order Code: M738 SAVE $ 24% 29 off RRP 2-Axis DRO 3-Axis DRO 200MM / 8” SAVE $9.50 2 x Scales (170-1020mm) 3 x Scales (170-1020mm) ALSO ON SALE Refer page 23 1 x Bracket Kit 1 x Bracket Kit Order Code: W859 + + Order Code: K5200 Order Code: K5202 $ ALL 149 $ $ SAVE $49 440 550 THIS AND Refer page 29 HUGE SAVING HUGE SAVING MORE AT THE SALE & receive - AMY $70 FREE Staff Member www.machineryhouse.com.au/signup DISCOUNT VOUCHERS UNIQUE PROMO CODE machineryhouse.com.au 3DSN17 SYDNEY BRISBANE MELBOURNE PERTH (02) 9890 9111 (07) 3274 4222 (03) 9212 4422 (08) 9373 9999 ONLINE OR INSTORE! 1/2 Windsor Rd, Northmead 625 Boundary Rd, Coopers Plains 1 Fowler Rd, Dandenong 11 Valentine St, Kewdale Specifications & Prices are subject to change without notification. -
Tooling Catalogue
TOOLING CATALOGUE www.wdhearn.co.za SUPPLIERS OF MACHINE TOOLS AND METROLOGY EQUIPMENT A G S Adjustable coolant hose ............... 65 Gauge blocks .................................... 78 Screw plug gauges ........................ 81 Air tapping machine .......................107 Geared head drilling machine ... 103 Screw ring gauges ........................ 82 Angle plates ........................................ 58 Granite surface plate .................. 80 Side and face cutters .................... 38,39 Automatic band saw ....................... 101 Ground parallels ............................. 58 Sidelock holders: ISO, BT ............ 53 Slitting saws ..................................... 39 B H Solid carbide cutters .................... 46 Bandsaw blades ...............................7 Hacksaw blades ............................. 7 Soluble oil ........................................... 64 Belt and disc sander ....................... 105 Height gauges .................................. 75,76,80 Stainless rule ................................... 80 Belt drive drilling machine ........... 104 Hole saws and arbors .................. 6 Static holders - Evermore .......... 93-98 Bench grinders and stand ........... 105 Horizontal band saw ..................... 101,102 Straight edge ................................... 80 Bevel protractor .............................. 77 Surfaces grinders ......................... 100 Bore gauge ........................................ 72,73 I Boring bar holders Input tools ......................................... -
Precision-Specialty-Tooling-Product
A E Micrometers Outside ................................................ 112-113 T Aluminium Cutting Lubricants .........................................133 Earth / Grounding clamps ..................................................62 Micrometers Outside - Digital .......................................... 114 Tap Magic Cutting Fluids .................................................101 Abrasive Backing Pads .............................................131-132 Edge and Centre Finder ..................................................123 Micrometers Three Point ................................................. 112 Tap and Die Wrenches .....................................................129 NEW Abrasive Cutting Discs Curve cut ...................................138 Engineers Squares ..........................................................108 Mig-Tig rests .......................................................................... Tape Adhesive Backed .................................................... 117 Abrasive restorers ............................................................133 Engineers Chalk .................................................................20 64............................................................................................ Tapered Spindles .............................................................134 Adjustable Reamers ........................................................104 Engineers Scribers .......................................................... 118 Milling Vice ......................................................................124 -
Here Find Many Users' Tips About Setting up Or Repairing Atlas Metal Lathes
Here find many users' tips about setting up or repairing Atlas metal lathes. The repair and fitting of Atlas metal lathes is the primary subject of this file, but many practices discussed here might be useful for other brands also. The file here called "Atlas Parts General" has contact information for Clausing (Atlas bought Clausing and adopted their more prestigious name). Lots of parts, original or newly made, at better prices than anywhere else. Clausing personnel know a great deal about their old Atlas products and have the majority of spare parts still in stock. Some are original and some are more recently manufactured. And if not in stock (which is more likely in the case of some accessory products like collet closers), they can probably provide a copy of the specifications so you could make one. And in most cases, parts from Clausing are much cheaper than available elsewhere. It makes sense to support this company that so cares for its clients and ancient products -- it is a very rare company indeed. Also, there are discussions in the text file "Atlas Parts General" as to how some parts may be repaired or even made from scratch. There are some repair discussions about the nuts involved for threading, half-nuts or split-nuts (hyphen optional), in the text file on this site called "Thread Dial and Half Nuts". I hope that Atlas owners will learn to read as well as think outside the box. The perfect solution to your Atlas lathe's problem might be completely solved in another group devoted to Taig or Sherline or Myford or Logan or South Bend or 7 X 10...12...whatever Minilathes or ......., and v.v. -
Virtual Flyer
VIRTUAL FLYER NEW! SQUARE T4-12 FEATURING PRODUCTIVITY KITS SAVE UP TO $425 MORE ROOM FOR LARGER INSERTS! SQUARE SHOULDER MILLING PAGE 5 PAGES 28 & 29 C-Clamps Air Hose Ratchets SPECIAL STARTING AT PURCHASE $ 85 1 30 PAGE 25 SALE STARTING AT $ 40 $10 25 29 PAGE 41 PAGE 52 Prices Effective April 1, 2016 Thru June 30, 2016 HOT BUYS HOT BUYS Gloves 135° Heavy Duty 16810 16810 Select Shoulder Spilt Cow: Split Point High Speed Steel ● Shoulder Leather ● Heavy Yellow Fabric Jobber Drill Sets ● 2-1/2“ Rubberized safety cuff ● 29 Pc sets 3120 Split Leather Driver: ● 1/16“ - 1/2“ by 64ths 25 ● Cow Split Leather ● Complete with metal index ● Straight Thumb ● Regular grade ● Slip-on cuffs 3120 Finish Order No. Regular Price SALE ● Unlined styles Gold & Black Finish AP50DY162HD 93.65 69.95 ● Shirred elastic backs Surface Treated AP50C162HDSP 125.30 89.95 ● Color-coded hem to identify size CT874 Style - 16810 Select Shoulder Split Cow Size Order No. Regular Price SALE 1 SALE 12 SALE 144 Large KB5116810L 7.00 6.30 5.95 5.25 Refractometers Style - 3120 Split Leather Driver ● Lightweight aluminum construction Size Order No. Regular Price SALE 1 SALE 12 SALE 144 ● Ergonomic, comfortable & easy operation Small KB513120S 5.75 5.18 4.89 4.31 ● Anti-slip, rugged body with durable & hygienic grip Medium KB513120M 5.75 5.18 4.89 4.31 ● Translucent viewing colored background Large 5.75 5.18 4.89 4.31 KB513120L ● Hard plastic portable carrying case with sampler included X-Large 6.10 5.49 4.58 4.58 KB513120XL ● Comfortable eyepiece for easy viewing PS635 ● Available in 0-10 & 0-32 Brix scale ● Lifetime warranty against manufacturer defects Hand Soap or Liquid Pumice ● Features Auto Temperature Compensation (ATC) for shops ● Tough on dirt but soft on hands, 10187 with varying temperatures formulated with moisturizers ● ame dirt and grime fighting soap 10185 Brix Scale Order No.