WELDING GTAW Gas Tungsten Arc Welding

Total Page：16

File Type：pdf, Size：1020Kb

Adult Education 2016 Chris Overfelt’s classes are held at Burton Center for Arts & Technology, Bldg. B, Room 345 ● WELDING GTAW ● Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. GTAW is most commonly used to weld thin sections of stainless steel and non-ferrous metals such as aluminum, magnesium, and copper alloys. The GTAW Class is 20 hours and the tuition is $400. GTAW A: Nov. 07, 14, 19, and 21, 2016 Monday classes 6PM – 10PM Saturday class 8AM - 4:30PM Bring safety glasses. Must be at least 18 years old. Basic math and reading is required. MAXIMUM 10 students. Please register in advance; tuition must accompany registration. You may register in person with cash or check or by mail with registration form and check. Checks are made payable to BCAT. Refunds are automatic when courses are filled or canceled. Refunds will not be given if the office is not notified 48 hours in advance or for participant’s withdrawal after class has begun. ------------------------------------------------------------------------------------------------------------------------------------------- ____ GTAW A: May 23, 26, June 2, 6 and 9, 2016 May also register and pay at: www.myschoolbucks.com ___________________________________________________________________________________ Name E-mail Address ___________________________________________________________________________________ Street Address City, State, and Zip Code ___________________________________________________________________________________ Home Phone Work Phone Cell Phone Cash Check - make checks payable to: BCAT ($50 returned check fee) Roanoke County Public Schools does not discriminate with regard to race, color, national origin, sex, or handicapping condition in an educational and/or employment policy or practice. Questions and/or complaints should be addressed to the Assistant Superintendent of Administration/Title IX Coordinator at (540) 562-3900 ext. 10121 or the Associate Director of Pupil Personnel Services/504 Coordinator at (540) 562-3900 ext. 10182. 1760 Roanoke Boulevard, Salem, VA 24153-6418 (540) 562-3900, ext. 29009 [email protected] .

Copy Link

Recommended publications

Fundamentals of Joining Processes
Outline ME3072 – MANUFACTURING ENGINEERING II BSc Eng (Hons) in Mechanical Engineering • Introduction to Welding Semester - 4 • Fusion-Welding Processes • Solid-State Welding Processes Fundamentals of Joining • Metallurgy of Welding Processes • Weld Quality • Brazing & Soldering Prepared By : R.K.P.S Ranaweera BSc (Hons) MSc Lecturer - Department of Mechanical Engineering University of Moratuwa 2 (for educational purpose only) Joining Processes Classification of Joining Processes 3 4 1 Introduction to Welding • Attention must be given to the cleanliness of the metal surfaces prior to welding and to possible • Is a process by which two materials, usually metals oxidation or contamination during welding process. are permanently joined together by coalescence, which is induced by a combination of temperature, • Production of high quality weld requires: pressure and metallurgical conditions. Source of satisfactory heat and/or pressure Means of protecting or cleaning the metal • Is extensively used in fabrication as an alternative Caution to avoid harmful metallurgical effects method for casting or forging and as a replacement for bolted and riveted joints. Also used as a repair • Advantages of welding over other joints: medium to reunite metals. Lighter in weight and has a great strength • Types of Welding: High corrosion resistance Fusion welding Fluid tight for tanks and vessels Solid-state (forge) welding Can be altered easily (flexibility) and economically 5 6 • Weldability has been defined as the capacity of • Steps in executing welding: metal to be welded under the fabrication conditions Identification of welds, calculation of weld area by stress imposed into a specific, suitably designed structure analysis, preparation of drawings & to perform satisfactorily in the intended service.
[Show full text]
Guidelines for the Welded Fabrication of Nickel-Containing Stainless Steels for Corrosion Resistant Services
NiDl Nickel Development Institute Guidelines for the welded fabrication of nickel-containing stainless steels for corrosion resistant services A Nickel Development Institute Reference Book, Series No 11 007 Table of Contents Introduction ........................................................................................................ i PART I – For the welder ...................................................................................... 1 Physical properties of austenitic steels .......................................................... 2 Factors affecting corrosion resistance of stainless steel welds ....................... 2 Full penetration welds .............................................................................. 2 Seal welding crevices .............................................................................. 2 Embedded iron ........................................................................................ 2 Avoid surface oxides from welding ........................................................... 3 Other welding related defects ................................................................... 3 Welding qualifications ................................................................................... 3 Welder training ............................................................................................. 4 Preparation for welding ................................................................................. 4 Cutting and joint preparation ...................................................................
[Show full text]
Keyhole Gas Tungsten Arc Welding: a New Process Variant Brian Laurence Jarvis University of Wollongong
University of Wollongong Research Online University of Wollongong Thesis Collection University of Wollongong Thesis Collections 2001 Keyhole gas tungsten arc welding: a new process variant Brian Laurence Jarvis University of Wollongong Recommended Citation Jarvis, Brian Laurence, Keyhole gas tungsten arc welding: a new process variant, Doctor of Philosophy thesis, Faculty of Engineering, University of Wollongong, 2001. http://ro.uow.edu.au/theses/1833 Research Online is the open access institutional repository for the University of Wollongong. For further information contact the UOW Library: [email protected] Keyhole Gas Tungsten Arc Welding: a new process variant. tSS!1' This photograph is an end-on view of keyhole GTAW on 8mm wall-thickness stainless steel pipe. Certification I, Brian Laurence (Laurie) Jarvis, declare that this thesis, submitted in fulfilment of the requirements for the award of Doctor of Philosophy, in the Department of Mechanical Engineering, University of Wollongong, is wholly my own work unless otherwise referenced or acknowledged. The document has not been submitted for qualifications at any other academic institution. Brian Laurence Jarvis 15m July 2001. Keyhole Gas Tungsten Arc Welding: a new process variant By Brian Laurence Jarvis B.Sc. (Hons) Flinders University, 1975 Thesis Submitted in fulfilment of the requirements for the degree of Doctor of Philosophy in Mechanical Engineering, Faculty of Engineering, University of Wollongong June 2001. Wollongong, New South Wales 1 Dedication To my Mother and Father Acknowledgements I wish to thank my adviser and supervisor, Professor Michael West, for his support and direction during this investigation. Special thanks are also due to my co-supervisor, colleague and friend, Dr Nasir Ahmed for laying the foundations for this work, and for his continued encouragement and support.
[Show full text]
Welding and Joining Guidelines
Welding and Joining Guidelines The HASTELLOY® and HAYNES® alloys are known for their good weldability, which is defined as the ability of a material to be welded and to perform satisfactorily in the imposed service environment. The service performance of the welded component should be given the utmost importance when determining a suitable weld process or procedure. If proper welding techniques and procedures are followed, high-quality welds can be produced with conventional arc welding processes. However, please be aware of the proper techniques for welding these types of alloys and the differences compared to the more common carbon and stainless steels. The following information should provide a basis for properly welding the HASTELLOY® and HAYNES® alloys. For further information, please consult the references listed throughout each section. It is also important to review any alloy- specific welding considerations prior to determining a suitable welding procedure. The most common welding processes used to weld the HASTELLOY® and HAYNES® alloys are the gas tungsten arc welding (GTAW / “TIG”), gas metal arc welding (GMAW / “MIG”), and shielded metal arc welding (SMAW / “Stick”) processes. In addition to these common arc welding processes, other welding processes such plasma arc welding (PAW), resistance spot welding (RSW), laser beam welding (LBW), and electron beam welding (EBW) are used. Submerged arc welding (SAW) is generally discouraged as this process is characterized by high heat input to the base metal, which promotes distortion, hot cracking, and precipitation of secondary phases that can be detrimental to material properties and performance. The introduction of flux elements to the weld also makes it difficult to achieve a proper chemical composition in the weld deposit.
[Show full text]
Welding Core: Gas Tungsten Arc Welding (GTAW) Course Outcome Summary
Welding Core: Gas Tungsten Arc Welding (GTAW) Course Outcome Summary Course Information Description Through classroom and/or lab/shop learning and assessment activities, students in this course will: explain the gas tungsten arc welding process (GTAW); demonstrate the safe and correct set up of the GTAW workstation; relate GTAW electrode and filler metal classifications with base metals and joint criteria; build proper electrode and filler metal selection and use based on metal types and thicknesses; build pads of weld beads with selected electrodes and filler material in the flat position; build pads of weld beads with selected electrodes and filler material in the horizontal position; perform basic GTAW welds on selected weld joints; and perform visual inspection of GTAW welds. Types of Instruction Instruction Type Credits 3 Competencies 1. Explain the gas tungsten arc welding process (GTAW) Properties Domain: Cognitive Level: Synthesis You will demonstrate your competence: o through an instructor-provided written or oral evaluation tool Your performance will be successful when: o you differentiate between types and uses of current o you identify the advantages and disadvantages of GTAW o you identify types of welding power sources o you identify different components of a GTAW workstation o you describe basic electrical safety 2. Demonstrate the safe and correct set up of the GTAW workstation Properties Domain: Cognitive Level: Application You will demonstrate your competence: o in a lab or shop setting o using a GTAW workstation Your performance will be successful when: o you demonstrate proper inspection of equipment o you demonstrate proper use of PPE o you demonstrate proper placement of workpiece connection o you check for proper setup of equipment o you inspect area for potential hazards/safety issues o you troubleshoot GTAW equipment and perform minor maintenance 3.
[Show full text]
Welding of Aluminum Alloys
4 Welding of Aluminum Alloys R.R. Ambriz and V. Mayagoitia Instituto Politécnico Nacional CIITEC-IPN, Cerrada de Cecati S/N Col. Sta. Catarina C.P. 02250, Azcapotzalco, DF, México 1. Introduction Welding processes are essential for the manufacture of a wide variety of products, such as: frames, pressure vessels, automotive components and any product which have to be produced by welding. However, welding operations are generally expensive, require a considerable investment of time and they have to establish the appropriate welding conditions, in order to obtain an appropriate performance of the welded joint. There are a lot of welding processes, which are employed as a function of the material, the geometric characteristics of the materials, the grade of sanity desired and the application type (manual, semi-automatic or automatic). The following describes some of the most widely used welding process for aluminum alloys. 1.1 Shielded metal arc welding (SMAW) This is a welding process that melts and joins metals by means of heat. The heat is produced by an electric arc generated by the electrode and the materials. The stability of the arc is obtained by means of a distance between the electrode and the material, named stick welding. Figure 1 shows a schematic representation of the process. The electrode-holder is connected to one terminal of the power source by a welding cable. A second cable is connected to the other terminal, as is presented in Figure 1a. Depending on the connection, is possible to obtain a direct polarity (Direct Current Electrode Negative, DCEN) or reverse polarity (Direct Current Electrode Positive, DCEP).
[Show full text]
Laser Assisted Non-Consumable Arc Welding Process Development
-- I I e Laser Assisted Non-Consumable Arc Welding Process Development Phillip W. Fuerschbach Frederick. M. Hooper Sandia National Laboratories Albuquerque, New Mexico 87185-0367p .- I - Introductioit - *- - - The employmenbaf Laser Beam Welding (LBW) for many traditionaQr&dpg ~ applications-_ is often limited by the inability of LBW to compensate for variations in the weld joint gap. This limitation is associated with fluctuations in the energy transfer efficiency along the weld joint. Since coupling of the laser beam to the workpiece is dependent on the maintenance of a stable absorption keyhole, perturbations to the weld pool can lead to decreased energy transfer and resultant weld defects. Because energy transfer in arc welding does not similarly depend on weld pool geometry, it is expected that combining these two processes together will lead to an enhanced fusion welding process that exhibits the advantages of both arc welding and LBW. Procedure Process development experiments have been made with an gas tungsten arc welding torch directed at a 60" angle to the side of a pulsed Nd:YAG laser beam. The laser beam was focused with a 150 mm focal length lens at the arc anode spot. Subsequent to these experiments a prototype plasma arc torch was designed and constructed which can also coaxially deliver the focused laser beam. This torch was designed to protect the tungsten electrode and to facilitate omni-directional torch motion. Bead on plate welds on 6061 aluminum, 1.25 mm sheet were made with both of the above set-ups and then metallographically sectioned and examined. A balance of 25% laser power and 75% arc power -- was used for most testing.
[Show full text]
Tig Welding of Aluminum Alloys for the Aps Storage Ring-A Uhv Application
· -----, The submittl!d manuscript ,1:::;5 been authored L8-254 by a contractor of the U. S. Government under contract No. W-31-109-ENG·38. Accordingly, the U. S. Government retains a nonexclusive, roya!ty~free license to publish or reproduce the published form of this contribution, Of allow others to do so, for U. S. Government purposes. TIG WELDING OF ALUMINUM ALLOYS FOR THE APS STORAGE RING-A UHV APPLICATION GEORGE A. GOEPPNER Accelerator Systems Division Advanced Photon Source Argonne National Laboratory May 29,1996 TIG WELDING OF ALUMINUM ALLOYS FOR THE APS STORAGE RING-A UHV APPLICATION GEORGE A. GOEPPNER Accelerator Systems Division INTRODUCTION The Advanced Photon Source (APS) incorporates a 7-GeV positron storage ring 1104 meters in circumference. The storage ring vacuum system is designed to maintain a pressure of 1 nTorr or less with a circulating current of 300 rnA to enable beam lifetimes of greater than 10 hours. 1 The vacuum chamber is an aluminum extrusion of 6063T5 alloy. There are 235 separate aluminum vacuum chambers in the storage ring connected by stainless steel bellows assemblies. Aluminum was chosen for the vacuum chamber because it can be economically extruded and machined, has good thermal conductivity, low thermal emissivity, a low outgassing rate, low residual radioactivity, and is non-magnetic. The 6063 aluminum-silicon magnesium alloy provides high strength combined with good machining and weldability characteristics. The extrusion process provides the interior surface finish needed for the ultrahigh vacuum (UHV) environment.2 There are six different vacuum chambers with the same extrusion cross section.
[Show full text]
ON the EFFECT of ENVIRONMENTAL PRESSURE on GAS TUNGSTEN ARC WELDING PROCESS by G6khan G6ktug
ON THE EFFECT OF ENVIRONMENTAL PRESSURE ON GAS TUNGSTEN ARC WELDING PROCESS by G6khan G6ktug B.Sc. in Civil Engineering, istanbul Technical University istanbul, 1986 S.M. in Civil Engineering, MIT Cambridge, 1990 SUBMITTED TO THE DEPARTMENT OF OCEAN ENGINEERING IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREES OF OCEAN ENGINEER and MASTER OF SCIENCE IN NAVAL ARCHITECTURE AND MARINE ENGINEERING at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY The author hereby grants to MIT June 1994 permission to reproduce and to a) 1994 GSkhan Gktu distribute publicly paper and All rights res rved electronic copies of this thesis document In whcle or in part. Signature of Author Department of Ocean Engineering June, 1994 Certified by .. Koichi Masubuchi Thesis Supervisor Accepted by ' A. Douglas ma-ri-ielal for Graduate Studies ON THE EFFECT OF ENVIRONMENTAL PRESSURE ON GAS TUNGSTEN ARC WELDING PROCESS by G6khan G6ktug Submitted to the Department of Ocean Engineering in June, 1994 in partial fulfillment of the requirements for the degrees of Ocean Engineer and Master of Science in Naval Architecure and Marine Engineering. Abstract With the increesing need for methods that will assist the construction and repair of space structures, gas tungsten arc welding (GTAW) is considered to be a possible process. This thesis reviews the experimental work performed in Welding Systems Laboratory (WSL) at MIT and Takamatsu National College of Technolgy (TNCI), Japan. To study the basic relation between pressure and the arc behaviour of GTAW, a pressure vessel installed at WSL was used to simulate high pressure (hyperbaric) and low pressure (vacuum) conditions. The arc shape of the GTAW was monitored by a 35 mm camera installed outside the vessel as welding was conducted at different levels of pressure.
[Show full text]
Welding Technology (WELD) 1
Welding Technology (WELD) 1 WELD 0004. Welding Operator Orientation WELDING TECHNOLOGY Units: 0.5 Prerequisite: Completion of WELD 2A and 5A with grades of "C" or better (WELD) Hours: 9 lecture Orientation course to prepare students for enrollment in WELD 84 (pass/ WELD 0001A. Introductory Welding for Metalworking no pass grading) (not transferable) Units: 2 WELD 0005A. Introduction to Shielded Metal Arc Welding (SMAW) - Formerly known as WELD 15 Career Path Hours: 72 (18 lecture, 54 laboratory) Units: 2 Hands-on survey class that focuses on the three common welding Formerly known as WELD 20 processes of Shielded Metal Arc Welding, Gas Metal Arc Welding, Advisory: Concurrent enrollment in WELD 1A or previous welding and Gas Tungsten Arc Welding, including correct setup and "how to" experience techniques. Plasma Arc Cutting and Oxyacetylene Cutting processes Hours: 72 (18 lecture, 54 laboratory) are also covered. This class is a survey of basic welding, cutting and An introduction to the principles of shielded metal arc welding (SMAW), fabrication used by the welding industry, metalworking artists, and setup/use of SMAW equipment, and safe use of tools and equipment interested hobbyists. Perfect for students who have never welded before. including oxyacetylene cutting. Provides instruction in welding carbon (CSU) steel weld joints in various positions. This is a required foundation WELD 0001B. Principles of Fabrication welding technology course for students who wish to pursue a career in Units: 2 structural or pipe welding outdoors at various construction sites. (C-ID Formerly known as WELD 70 WELD 101X) (not transferable) Prerequisite: Completion of WELD 1A and completion of WELD 2A, WELD WELD 0005B.
[Show full text]
Gas Tungsten Arc Welding Production Welder Certificate - 18 Credits Program Area: Integrated Manufacturing Welding (Fall 2021)
Gas Tungsten Arc Welding Production Welder Certificate - 18 credits Program Area: Integrated Manufacturing Welding (Fall 2021) ***REMEMBER TO REGISTER EARLY*** Program Description Required Courses This certificate will provide the student with Number Name Credits Term entry level skills and knowledge to perform Blueprint Reading for WLDG 1500 3 as a gas tungsten arc welder (GTAW) with Welders minimal supervision in all positions on Gas Tungsten Arc Welding WLDG 1520 3 ferrous and nonferrous metals. I Gas Tungsten Arc Welding WLDG 1522* 3 This 18-credit Certificate seamlessly transfers to II the Welding Diploma (65 credits). Gas Tungsten Arc Welding WLDG 1524* 3 III Program Outcomes GTAW Fabrication WLDG 1582* 3 • Utilize safe working techniques and Methods practices Technical Choose any from CADE, 3 • Read prints and interpret welding symbols Electives INMG, MTCC or WLDG • Use measuring and layout tools properly Total Credits 18 • Operate welding tools and equipment *Requires a prerequisite or a concurrent course • Apply metallurgy principles to welding and metal fabrication processes • Determine the quality of welds • Utilize computerized equipment for welding and cutting Pre-program Requirements Successful entry into this program requires a specific level of skill in the areas of English, mathematics, and reading. Program entry will depend, in part, on meeting the prerequisites listed below: English/Reading: • Eligible for ENGL/READ 0955 – Read/Write College Prep: Advanced, or • Completion of ENGL/READ 0950 or 0955 (or equivalent course or higher). ENGL/READ 0950 may be taken concurrently with Semester I coursework. There are other ways to qualify. Visit Course Placement (lsc.edu/course-placement) to find out more.
[Show full text]
Comparison of Ti-5Al-5V-5Mo-3Cr Welds Performed by Laser Beam, Electron Beam and Gas Tungsten Arc Welding
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 63 ( 2013 ) 397 – 404 The Manufacturing Engineering Society International Conference, MESIC 2013 Comparison of Ti-5Al-5V-5Mo-3Cr Welds Performed by Laser Beam, Electron Beam and Gas Tungsten Arc Welding a, b a b b c T. Pasang *, J.M.Sánchez Amaya , Y. Tao , M.R. Amaya-Vazquez , F.J. Botana , J.C Sabol , c d W.Z. Misiolek , O. Kamiya aDept. of Mechanical Eng., AUT University, Auckland 1020, New Zealand bUniversidad de Cádiz. Departamento de Ciencia de los Materiales e Ingeniería Metalúrgica y Química Inorgánica. Avda. República Saharaui s/n, 11510-Puerto Real, Cádiz, Spain cInstitute for Metal Forming, Lehigh University, 5 East Packer Avenue, Bethlehem, PA 18015, USA dDepartment of Mechanical Engineering, Akita University, Akita City, Japan Abstract Welding characteristics of Ti-5Al-5V-5Mo-3Cr (Ti5553) alloy has been investigated. The weld joints were performed by laser beam (LBW), electron beam (EBW) and gas tungsten arc welding (GTAW). Regardless of the welding method used, the welds showed low hardness values with coarse columnar grains in the fusion zone (FZ) and retained equiaxed beta phase within the heat affected zone (HAZ). Larger grains were present at the near HAZ compared with far HAZ (near base metal). The strengths of the welded samples were lower than the base metal. Fracture occurred at the weld zones with transgranular and microvoid coalescence fracture mechanism. © 2013 The Authors. PublishedPublished by by Elsevier Elsevier Ltd. Ltd. Selection and peer-reviewpeer-review underunder responsibility responsibility of of Universidad Universidad de de Zaragoza, Zaragoza, Dpto Dpto Ing Ing Diseño Diseño y Fabriy Fabricacioncacion.
[Show full text]