T16 User Manual

Total Page:16

File Type:pdf, Size:1020Kb

T16 User Manual User Manual ® DNAble Reader & Desktop Application Version 1.0 March 2013 1 PREFACE This manual, as well as the hardware and software described in it, is provided under license and may be used and/or copied only in accordance with the terms of such license. The content of this manual is furnished for informational use only, is subject to change without notice and should not be construed as a commitment by Axxin Pty. Ltd. or EnviroLogix Inc. This document is provided as an operational summary to describe the use of the instrument accessed remotely using the supplied desktop software application. This document does not describe operation of the specific diagnostic test or provide any input to the requirements, safety or processing of the diagnostic test which is outside of the scope of Axxin Pty Ltd. EnviroLogix Inc. 500 Riverside Industrial Parkway Portland, ME 04103 Ph: 1-866-408-4597 (1-207-797-0300 outside U.S.) 1.1 CONVENTIONS SYMBOL NAME DESCRIPTION Indicative of a situation which, if not avoided, could result in injury Warning to the user and/or damage to the instrument. This symbol is used to indicate potentially hot instrument Hot Surface surfaces. USB USB 2.0 High Speed interface connector Connector Ethernet Wired Ethernet ,10/100 Mb/s connector Connector Power DC Power connector, for connection with supplied external Connector AC/DC power pack. 12V DC, 3.0 Amp maximum Critical information relating to procedures or use of the NOTE Information instrument. 1.2 ABBREVIATIONS ID Identification PC Personal Computer LCD Liquid Crystal Display PCB Printed Circuit Board LED Light-Emitting Diode USB Universal Serial Bus 2 of 21 DNAble Reader User Manual Version 1.0 2 WARNINGS AND SAFE USE Always operate the instrument on a surface that is level and dry and not in direct sunlight. Never move the instrument while there is a test in progress. To avoid damaging the instrument, never place objects on top of it. Warning: Do not use this device in close proximity to sources of strong electromagnetic radiation (e.g. unshielded intentional RF sources), as these may interfere with the proper operation. Warning: Any changes or modifications not explicitly approved by Axxin Pty Ltd could void the user's authority to operate this equipment Warning: If a USB extension cable is used with the instrument the total length should not exceed 3.0 meters. Warning: Hot Surfaces. The heater block in this instrument operates up to 65˚C and may cause contact burns or damage to materials in contact with these areas. Warning: This instrument is designed to operate only with the provided power supply plug pack. This module forms part of the system. Do not operate the system with a different power supply module. The correct power supply is required to maintain the safety and electromagnetic compatibility of the system. Warning: Risk of electrical shock. Do not operate the instrument or the power supply plug pack if it has been opened, damaged or exposed to moisture, condensation or rain. The external power supply plug pack is sealed with no user serviceable parts. Do not operate this module with any damaged or exposed parts. Warning: Do not open or attempt to repair the instrument or other accessories as there is a risk of damage to the instrument. This instrument does not contain serviceable parts and should be returned to the supplier for repair. Opening the instrument will also void the warranty. Real time clock coin battery included in the equipment will run for the operational life and is not a user replaceable item. Warning: Only operate the instrument for its intended purpose and in accordance with this user manual and warnings. Protection provided by the equipment may be impaired if the equipment is operated in a manner contradictory to the above. This instrument (including power supply) is designed to operate within the manufacturers specifications. Do not exceed the manufacturer’s specifications when in use. Warning: Position the unit with clear access to connectors. Keep connected cables clear of work areas such that tripping or catching will not pull the unit off its work bench. The mains socket outlet intended to use with the DNAble Readers external power pack should be located near the equipment and should be readily accessible. It’s recommended that the user unplug the DNAble Reader Instrument when not in use. Warning: USB and Ethernet Interfaces. If intended for connection to external equipment, please ensure that interfaces of such equipment are separated from mains by double the reinforced insulation and present no risk of electrical shock. DNAble Reader User Manual Version 1.0 3 of 21 3 INTRODUCTION This document describes setup, configuration and operation of the DNAble Reader Instrument that works in conjunction with the Desktop software application. The DNAble Reader Instrument complies with the emission and immunity requirements described in IEC61326-2-6. The instrument manufacturer advises the user to assess the electromagnetic environment of the intended operational environment of the device prior to use. The instrument test set up is conducted on the DNAble Reader Desktop application and displays detailed test results of a test that can be exported or printed. When running a test, the desktop application displays live graphs of the tube measurements. The application will save and allow measured data, including a .csv file and graph images, to be exported. This document is provided as an operational guide to describe the use of the instrument. This document does not describe operation of the specific diagnostic test or provide any input to the requirements, safety or processing of any diagnostic test. See the specific product insert for assay procedure. NOTE 1 It is the manufacturer’s responsibility to provide equipment electromagnetic compatibility information to the customer or user. NOTE 2 It is the user’s responsibility to ensure that a compatible electromagnetic environment for the equipment can be maintained in order that the device will perform as intended. NOTE 3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 3.1 SAFE USE GUIDELINES The DNAble Reader Instrument is designed to operate safely under these conditions: Indoor use (protected from water) Pollution Category 2 Altitude up to 2000m Use with specified and supplied external AC/DC power adaptor only Temperature 10ºC to 30ºC Mains socket for AC/DC power pack should be Relative humidity 10% to 70% non-condensing readily accessible Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage Set up unit on a stable, level bench, in an office or laboratory environment Installation Categories (Overvoltage categories) II 4 of 21 DNAble Reader User Manual Version 1.0 3.2 LAYOUT Figure 1 Front View Figure 2 Back View DNAble Reader User Manual Version 1.0 5 of 21 3.3 INSTRUMENT SPECIFICATIONS Number of Tubes Configured for up to 16 tubes Measurement Technology Fluorescent - 3 Channel Color Touch Screen 3.5” Simple workflow management Ease of use; Color icon driver menus and prompts. Communications Cable Ethernet for Data Transfer USB Port for data export, barcode reader and printer Mini USB Port for Laptop connection Data storage Up to 99 results (configurable) Power 12V DC from external AC/DC supplied plug pack Battery power (optional) DC Voltage fluctuation ±10% DC Current consumption: 12V DC, 3.0 Amps Dimensions 380 mm (L) x 122 mm (W) x 139 mm (H) 14.0” (L) x 4.8” (W) x 5.4” (H) Weight 1.95 kg (4.1 Ib) Lifetime 3 year calibration life 5 year instrument life Printers Network Printer Operating Environment Indoor Use 10ºC to 30ºC 10% to 70% RH (non-condensing) 0 to 2000m altitude Pressure 0.763 bar (2000m) to 1.01 bar (sea level) Pollution category 2 Minimum light conditions of 100 LUX Maximum light intensity of 5,000 LUX Storage Environment 0ºC to 45ºC, 20% to 70% RH (non-condensing) for at least 7 days. Pressure 0.763 to 1.01 bar. 0 to 2000m altitude. Maximum duration 1 month (cumulative) Cleaning Isopropyl Alcohol (IPA), on a damp/lint-free wipe (no free liquid) 3.4 12V POWER SUPPLY ADAPTOR SPECIFICATIONS The DNAble Reader Instrument is operated using only the specified and supplied AC/DC power adaptor to ensure both the EMC and safety compliance of the product. The Axxin supplied power adapter, 12V DC, 3.5 Amps Part Number: P002090 Description: Power adapter input 100-240V AC~50/60Hz 1.2A. Output DC 12V, 3.5A Approval UL'CE; C-Tick; FCC and PSE 4 types plug to fit Australia type; UK type; US (Europe) type and China type. 6 of 21 DNAble Reader User Manual Version 1.0 Rated input voltage 100-240V AC Rated input frequency 50/60Hz Rated input current 1.2 Amps Operating Environment 0ºC to 40ºC 10% to 80% RH (non-condensing) Storage Environment -20ºC to 80ºC 10% to 90% RH (non-condensing) Output voltage 12V Output current: 3.5 Amps The supplied power adapter (P002090) is compliant with the following standards: ARCANUM COUNTRY CERTIFIED STATUS STANDARD UL USA MEET UL 60950-1 CSA Canada MEET CSA C22.2 NO.950 TUV Europe MEET TUV/VDE-EN60950-1 CE Europe MEET Declared& CE Mark PSE Japan / J60950(H19)/J55001(H14) BSMI Taiwan / CNS13438 CCC China / GB4943-2001 UK Britain MEET EN60950-1:2000 3.5 POWER BUTTON The DNAble instrument incorporates a front-mounted power button.
Recommended publications
  • UKUI: a Lightweight Desktop Environment Based on Pluggable
    2016 International Conference on Artificial Intelligence and Computer Science (AICS 2016) ISBN: 978-1-60595-411-0 UKUI: A Lightweight Desktop Environment Based on Pluggable Framework for Linux Distribution Jie YU1, Lu SI1,*, Jun MA1, Lei LUO1, Xiao-dong LIU1, Ya-ting KUANG2, Huan PENG2, Rui LI1, Jin-zhu KONG2 and Qing-bo WU1 1College of Computer, National University of Defense Technology, Changsha, China 2Tianjin KYLIN Information Technology Co., Ltd, Tianjin, China *[email protected] *Corresponding author Keywords: Desktop environment, Ubuntu, User interface. Abstract. Ubuntu is an operating system with Linux kernel based on Debian and distributed as free and open-source software. It uses Unity as its default desktop environment, which results in more difficulties of usage for Microsoft Windows users. In this paper, we present a lightweight desktop environment named UKUI based on UbuntuKylin, the official Chinese version of Ubuntu, for Linux distribution. It is designed as a pluggable framework and provides better user experience during human-computer interaction. In order to evaluate the performance of UKUI, a set of testing bench suits were performed on a personal computer. Overall, the results showed that UKUI has better performance compared with Unity. Introduction Linux is a freely available operating system (OS) originated by Linux Torvalds and further developed by thousands of others. Typically, Linux is packaged in a form known as a Linux distribution for both desktop and server use. Some of the most popular mainstream Linux distributions are Red Hat [1], Ubuntu [2], Arch [3], openSUSY [4], Gentoo [5], etc. There are several desktop environments available for nowadays modern Linux distributions, such as XFCE [6], GNOME [7], KDE [8] and LXDE [9].
    [Show full text]
  • System Requirements
    1. System Requirements . 2 1.1 Software Requirements . 3 1.1.1 Application Server Requirements . 4 1.1.2 Database Requirements . 5 1.1.3 Management Tool Requirements . 6 1.2 Hardware Requirements . 7 1.2.1 Small Deployments (Up to 200 Simultaneous Sessions) . 8 1.2.2 Medium Deployments (Up to 1,000 Simultaneous Sessions) . 9 1.2.3 Large Deployments (Up to 10,000 Simultaneous Sessions) . 10 1.3 Client Requirements . 11 1.3.1 The Client as a Terminal Server Requirements . 12 1.3.2 Windows Client Requirements . 13 1.3.3 Linux Client as a Terminal Server Requirements . 14 1.3.4 Linux Client Requirements (Monitoring of the GUI for X Window System) . 15 1.3.5 macOS Client Requirements . 16 1.3.6 Client Performance Numbers . 17 1 System Requirements Table of Contents Software Requirements Application Server Requirements Database Requirements Management Tool Requirements Hardware Requirements Small Deployments (Up to 200 Simultaneous Sessions) Medium Deployments (Up to 1,000 Simultaneous Sessions) Large Deployments (Up to 10,000 Simultaneous Sessions) Client Requirements The Client as a Terminal Server Requirements Windows Client Requirements Linux Client as a Terminal Server Requirements Linux Client Requirements (Monitoring of the GUI for X Window System) macOS Client Requirements Client Performance Numbers 2 Software Requirements Table of Contents Application Server Requirements Database Requirements Management Tool Requirements 3 Application Server Requirements • Windows Server 2019, Windows Server 2016 or Windows Server 2012 (x64 platform).
    [Show full text]
  • Endeavouros.Pdf] Page: 1 of 10
    Distro Telemetry Watch [dtw 07-EndeavourOS.pdf] Page: 1 of 10 Distro : EndeavourOS Wikipedia : https://en.wikipedia.org/wiki/EndeavourOS Website : https://endeavouros.com/ Twitter : https://twitter.com/OsEndeavour Status : May 2021 Author : summertime tech CPU : Tested on x86 – 64bits One Installable .iso for all desktops: endeavouros-2021.02.03-x86_64.iso Xfce is default desktop install via offline Other desktops install via Online netinstall Including Update Conclusion: Because of the built-in(*) telemetry this distro is only suitable for use in DEV- & TEST environments. At this moment there is no .iso without telemetry, so distro is not useable in ACC- & PROD environments. (*) if it was not built-in but “only” in Repo there are methods to block specific packages: <read article> ; for long-term solution ask/tweet distro to remove telemetry package from Repo Distro is not “Privacy by Design” ; Overview & Suggestions for improvements: <read here> Cat.0 Telemetry Xfce See Cat.3 & 4 MATE See Cat.3 & 4 KDE See Cat.3 & 4 GNOME See Cat.3 & 4 Cinnamon See Cat.3 & 4 Budgie See Cat.3 & 4 Deepin See Cat.3 & 4 i3-wm See Cat.3 & 4 LXQt See Cat.3 & 4 Distro Telemetry Watch [dtw 07-EndeavourOS.pdf] Page: 2 of 10 Cat.1 Telemetry N/A Cat.2 Telemetry N/A Cat.3 Telemetry Xfce → Log Tools; via Menu; App System; App EndeavourOS Log Tools with range of options including “Remove personal data from logs” default <off>; User set to <on>; option “Send logs to internet” default <off>; User don’t change. See screenshots below and Annex-1 Img6 & Img7 → Log Tools can’t be deleted.
    [Show full text]
  • Op E N So U R C E Yea R B O O K 2 0
    OPEN SOURCE YEARBOOK 2016 ..... ........ .... ... .. .... .. .. ... .. OPENSOURCE.COM Opensource.com publishes stories about creating, adopting, and sharing open source solutions. Visit Opensource.com to learn more about how the open source way is improving technologies, education, business, government, health, law, entertainment, humanitarian efforts, and more. Submit a story idea: https://opensource.com/story Email us: [email protected] Chat with us in Freenode IRC: #opensource.com . OPEN SOURCE YEARBOOK 2016 . OPENSOURCE.COM 3 ...... ........ .. .. .. ... .... AUTOGRAPHS . ... .. .... .. .. ... .. ........ ...... ........ .. .. .. ... .... AUTOGRAPHS . ... .. .... .. .. ... .. ........ OPENSOURCE.COM...... ........ .. .. .. ... .... ........ WRITE FOR US ..... .. .. .. ... .... 7 big reasons to contribute to Opensource.com: Career benefits: “I probably would not have gotten my most recent job if it had not been for my articles on 1 Opensource.com.” Raise awareness: “The platform and publicity that is available through Opensource.com is extremely 2 valuable.” Grow your network: “I met a lot of interesting people after that, boosted my blog stats immediately, and 3 even got some business offers!” Contribute back to open source communities: “Writing for Opensource.com has allowed me to give 4 back to a community of users and developers from whom I have truly benefited for many years.” Receive free, professional editing services: “The team helps me, through feedback, on improving my 5 writing skills.” We’re loveable: “I love the Opensource.com team. I have known some of them for years and they are 6 good people.” 7 Writing for us is easy: “I couldn't have been more pleased with my writing experience.” Email us to learn more or to share your feedback about writing for us: https://opensource.com/story Visit our Participate page to more about joining in the Opensource.com community: https://opensource.com/participate Find our editorial team, moderators, authors, and readers on Freenode IRC at #opensource.com: https://opensource.com/irc .
    [Show full text]
  • For Dr Landau's PHYS8602 Course
    For Dr Landau’s PHYS8602 course Shan-Ho Tsai ([email protected]) Georgia Advanced Computing Resource Center - GACRC January 7, 2019 You will be given a student account on the GACRC’s Teaching cluster. Your username will be your UGA MyID and the password is your UGA MyID password. You will be able to access/use this account for the duration of the course. At the end of the semester your account will be deleted, so make sure to transfer (download) any files that you would like to keep to your local machine/drive by the end of the semester. 1 Machine characteristics • Machine name: Teaching cluster • Login node (node where you login to) name: teach.gacrc.uga.edu • Operating System: 64-bit Linux (CentOS 7.6) • Types of nodes: – The login node is an Intel Xeon. – The compute nodes (nodes where your programs will run) are Intel Xeons. – The cluster also has two interactive nodes, which are AMD Opterons. These nodes are used to run applications that have a graphical front-end, such as graphing programs. • NOTE: No jobs should be run on the login node!!! 2 Where do I find documentation about GACRC and the teaching cluster? • Webpage: http://gacrc.uga.edu/ Provides a general overview of GACRC. • Wiki: https://wiki.gacrc.uga.edu/wiki/Main Page Provides documentation about the teaching cluster, including how to connect to it, how to transfer files, how to compile code, how to run jobs, what software packages are installed, etc. • Training Opportunities: https://wiki.gacrc.uga.edu/wiki/Training GACRC provides free training workshops on how to use computing clusters, how to use Linux, etc.
    [Show full text]
  • Kali Linux 2021.1 Release (Command-Not-Found)
    Published on Tux Machines (http://www.tuxmachines.org) Home > content > Kali Linux 2021.1 Release (Command-Not-Found) Kali Linux 2021.1 Release (Command-Not-Found) By Roy Schestowitz Created 24/02/2021 - 11:16pm Submitted by Roy Schestowitz on Wednesday 24th of February 2021 11:16:42 PM Filed under GNU [1] Linux [2] Security [3] How you choose to interact with Kali is completely up to you. You may want to access Kali locally or remotely, either graphically or on the command line. Even when you pick a method, there are still options you can choose from, such as a desktop environment. By default, Kali uses Xfce, but during the setup process, allows for GNOME, KDE, or no GUI to be selected. After the setup is complete, you can install even more. We have pre-configurations for Enlightenment, i3, LXDE, and MATE as well. [...] When we use Kali, we spend a significant amount of time using the command line. A lot of the time, we do it using a local terminal (rather than in a console or remote SSH). With the options of desktop environments, there are also choices when it comes to the terminals (same with what shell to use). [4] Also: Kali Linux 2021.1 released: Tweaked DEs and terminals, new tools, Kali ARM for Apple Silicon Macs [5] GNU Linux Security Source URL: http://www.tuxmachines.org/node/148105 Links: [1] http://www.tuxmachines.org/taxonomy/term/144 [2] http://www.tuxmachines.org/taxonomy/term/63 [3] http://www.tuxmachines.org/taxonomy/term/59 [4] https://www.kali.org/blog/kali-linux-2021-1-release/ [5] https://www.helpnetsecurity.com/2021/02/24/kali-linux-2021-1-released/.
    [Show full text]
  • Desktop Environments Jeffery Russell and Tim Zabel
    Desktop Environments Jeffery Russell and Tim Zabel Please sign in! http://bit.ly/ritlug-2020 Keep up with RITlug outside of meetings: ritlug.com/get-involved, rit-lug.slack.com Desktop Environments: when terminals just won't do it What makes a desktop environment (DE)? A desktop environment typically contains two major components: - Window Manager Manages windows, icons, menus, pointers - Widget Toolkit - Used to write applications with a unified look and behavior GNOME 3 - Easy to use - “Most” Popular - Great Companability - Nautilus as default file manager KDE Plasma - Uses Dolphin file manager - Easy to use - Very uniform software stack like GNOME Xfce - Lightweight - Easy to use - Thunar file manager Cinnamon - Fork of GNOME 3 - Nemo File Manager - Crist look - Tons of desklets - Very stable MATE - Extension of GNOME 2 - Caja File Manager Unity - Not technically its own DE but a shell extension for GNOME - This is known for giving Ubuntu its iconic sidebar LXQt - Very Lightweight - Easy to use Pantheon - DE designed for Elementary OS - OSX like interface - Looks amazing - Due to simplicity, it is missing some things that are commonplace in other DEs (limited customizations) Deepin - Simple - Very elegant - Developed by a Chinese community Performance? Source: https://itsfoss.com/linux-mint-v s-ubuntu/ Equinox (EDE) - Very lightweight - Last stable release was in 2014 - Reminiscent of windows 9x interface Questions? Window Managers WMs ● Specifically controls placement and appearance of windows ● Doesn’t come with any other integrated tools
    [Show full text]
  • Distro-Hopping Szempontok a Megfelelő Disztribúció Megtalálásához 1 / 13 Distro-Hopping
    Distro-hopping szempontok a megfelelő disztribúció megtalálásához 1 / 13 Distro-hopping 2 / 13 Probléma a gyakori distro-hoppal: Rengeteg elpazarolt idő ● Telepítési, beállítási folyamat: rendszer + szükséges csomagok: különböző distro, különböző csomagnév → általában nem kerülhető el, hogy egyesével mindent újra beállítsunk ● Tanulási folyamat: – különböző csomagkezelők, különböző alkalmazás telepítési módok, más beállítás fájlok (más elérhetőség, más szintaxis), más alapértelmezett alkalmazások, más workflow, … – de ez nem hasznos tudás (kivéve talán az adaptációs képesség fejlődése) ● Backup-restore folyamat: adatok átmentése, potenciális adatvesztés (bénázás miatt) 3 / 13 Distro-hop lényege: Megtalálni a megfelelő disztribúciót ● Akár hosszú évekre megtalálni egy olyan distrot, ami – a legtöbb munkafolyamatunknak megfelelő, jól kiismerhető – kellően stabil és folyamatos működést tud biztosítani – minimális a fenntartási / karbantartási költsége ● Nincs tökéletes választás. ● Ha van telepítés nélkül kipróbálható (Live USB) változat, érdemes néhány napig így kipróbálni a tényleges váltás előtt (a változások általában menthetőek) 4 / 13 Desktop Environment (DE) Awesome, Budgie, Cinnamon, Deepin, GNOME, i3, KDE, LXDE, LXQt, MATE, Pantheon, Openbox, Xfce, … ● DE váltási okok: – A megszokott felület és workflow jelentősen megváltozik (pl: gnome 2 → gnome 3) – Meglátunk egy jobban kinéző, vagy valami oknál fogva praktikusabbnak tűnő felületet ● Distro váltás DE váltás miatt? DE != distro ● Érdemes eleve olyan disztribúciót választani, ahol
    [Show full text]
  • Tiling Window Managers
    Overview Window Managers Tiling Algorithms Getting Started Demos Meta Tiling Window Managers Aline Abler April 4, 2016 Tiling Window Managers 1 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta Table of Contents What will we learn today? I What is a window manager? I What makes it tiling? I Why is tiling cool? I How does it work? I How do I put it on my system? I Which one should I use? Tiling Window Managers 2 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta Functionality of Window Managers Well, it manages windows You already have one Tiling Window Managers 3 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta Functionality of Window Managers Stacking Window Managers Each window is freely draggable and resizable Tiling Window Managers 4 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta Functionality of Window Managers When do we call it tiling? I Windows are arranged for you I They always take up the entire screen I You always see all of them How is that better? Tiling Window Managers 5 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta How to tile windows Tiling approaches List vs. Tree Tiling Window Managers 9 Aline Abler Overview Window Managers Tiling Algorithms Getting Started Demos Meta How to tile windows List based tiling I Windows are internally represented as ordered list I Arrangement is based on their positions in the list I Numerous ways to do this Tiling Window Managers
    [Show full text]
  • 3 Installing PC-BSD®
    PC-BSD® 9.1 Users Handbook Page 2 of 308 Table of Contents 1 Introduction ........................................................................................................................................... 11 1.1 Goals and Features ........................................................................................................................ 11 1.2 What's New in 9.1 ......................................................................................................................... 12 1.3 PC-BSD® Releases ....................................................................................................................... 13 1.4 PC-BSD® for Linux Users ............................................................................................................ 14 1.4.1 Filesystems ........................................................................................................................... 14 1.4.2 Device Names ....................................................................................................................... 16 1.4.3 Feature Names ...................................................................................................................... 16 1.4.4 Commands ............................................................................................................................ 16 1.4.5 Additional Resources ............................................................................................................ 17 2 Pre-Installation Tasks ...........................................................................................................................
    [Show full text]
  • Latest Technologies in the HPC World on Windows
    VSC documentation Documentation Release 1.0 VSC (Vlaams Supercomputing Center) Sep 03, 2021 Contents 1 Getting access 1 1.1 Required steps to get access.......................................1 1.2 VSC accounts..............................................1 1.3 How to request an account?.......................................1 1.4 Next steps................................................4 1.5 Additional information..........................................4 2 Access and data transfer 7 2.1 Logging in to a cluster..........................................7 2.2 Data storage............................................... 13 2.3 Transferring data............................................. 16 2.4 GUI applications on the clusters..................................... 24 2.5 VPN................................................... 24 3 Software stack 25 3.1 Using the module system......................................... 25 4 Running jobs 31 4.1 Job script................................................. 31 4.2 Submitting and monitoring a job..................................... 32 4.3 Job output................................................ 37 4.4 Troubleshooting............................................. 38 4.5 Advanced topics............................................. 40 5 Software development 43 5.1 Programming paradigms......................................... 43 5.2 Development tools............................................ 50 5.3 Libraries................................................. 72 5.4 Integrating code with software packages................................
    [Show full text]
  • I3 Window Manager (I3wm)
    i3 Window Manager (i3wm) Sumner Evans October 4, 2018 Mines Linux Users Group Let’s Talk About Window Management Why do we use windows? • Windows separate information on a screen • Windows allow you to easily switch between tasks Most modern OSes have workspaces as well. Workspaces refer to the grouping of windows in some window managers. 1 1https://en.wikipedia.org/wiki/Workspace#Graphical_interfaces What’s the normal motif for windows? • Opening a window: go to some menu somewhere, navigate through a ton of menus, click a button • Closing a window: click the X button (or Alt + F4) • Moving a window: find the title bar, click-and-drag • Resizing a window: find the little thingy in the corner, click-and-drag • Snapping a window to the side of the screen: find the title bar, drag it to the window to the side, hope that your desktop environment supports window snapping What’s the normal motif for windows? • Opening a window: go to some menu somewhere, navigate through a ton of menus, click a button • Closing a window: click the X button (or Alt + F4) • Moving a window: find the title bar, click-and-drag • Resizing a window: find the little thingy in the corner, click-and-drag • Snapping a window to the side of the screen: find the title bar, drag it to the window to the side, hope that your desktop environment supports window snapping What’s the normal motif for windows? • Opening a window: go to some menu somewhere, navigate through a ton of menus, click a button • Closing a window: click the X button (or Alt + F4) • Moving a window: find
    [Show full text]