Innovative structural fastening Distinctly quieter and appreciably easier-to-use: the new -rivet system from SFS intec The new SRB screw-rivet: quieter than a conventional as strong as a structural rivet

The benefits to you: Single-side assembly Single hand operation Quiet installation no break-off noise Torque is taken up by the power – no wrist strain Narrow drive unit enables ease of operation in confined spaces Complete corrosion protection – there is no exposed break-off zone Re-tightening possible

The innovative solution Simple, quiet installation from SFS intec: The equipment consists of a conven- We combined the advantages tional air-powered tool, fitted with a of threaded with those of special drive unit. The screw-rivet is rivets to produce the SRB screw-rivet; held in place magnetically, enabling it a pre-assembled two-part fastener. SRB – ergonomic security to be inserted safely and ergonomically During the insertion operation, the The screw-rivets are fixed securely with one hand. sleeve of the rivet, with the assem- from a single side. The screw element At a pre-set torque the sleeve is bled screw, is deformed to produce remains in the rivet sleeve, offering deformed, creating the seal. Once this an enlarged blind side bearing area. tremendous shear strength, while the deformation and sealing process is The fastener can also be re-tightened chrome VI-free surface finish affords complete, the installation is finished, if required. a high resistance to corrosion. and the tool cannot over-torque. Structural fixing In vehicle building, components which are subject to dynamic loads are fitted using structural rivets. These are inserted using heavy, cumbersome installation . Cutting off the rivet face is accompanied by a loud noise of up to 100 decibels; and what’s more, the cut surface is exposed to corrosion.

Appreciably easier to use – hear the difference ! The new SRB screw-rivet system enab- les fatigue-free, ergonomic installation with a simple air-tool. Strain on the wrist is minimal, because the torque is taken up by the power tool. Quiet, speedy installation makes for really efficient work. The absence of a cut face means complete corrosion protection. SFS intec AG / FasteningSystems-Industry / CH-9435 Heerbrugg / [email protected] /www.sfsintec.biz Heerbrugg /[email protected] SFS intec AG /CH-9435 /FasteningSystems-Industry of theneedstransportindustry. years increasingtheirunderstanding technical specialistswhohave spent partner. You willbesupportedby makepromising quality usareliable in-house manufacture anduncom- new, innovative products.Flexible, develop theideasandsynergiesfor many othersectors,we seekoutand system supplyindustry, aswell as turers fromthetransportand vehicle Working directlywithleadingmanufac- perience ofwhatisneededinpractice. technology, we have realex- As specialistsinfastener andcold SFS intec: your competent partner for thetransport industry Innovative fastener technology Properly fitted, withoutfail on request. for specificprojectscanalsobequoted from 4mmto12 mm.Speciallengths in four lengthswithclampingzones SRB screw-rivets themselves, available special drive unit,togetherwiththe a light-weight airtoolequippedwitha The completeSRBsystem consistsof A carefully thought-outsystem Range offasteners Dimensions andcharacteristics SRB– TT SRB– TT SRB– TT SRB– TT yeMaterial Type carbon

–1026510 –10,0 –12 –26,5 –10245 –10,0 –24,58–10 –10225 –10,0 –22,56 8 –10205 –10,0 –20,54 6 ∅ oeDiameter Code lmigfreSersrnt Tensile breaking Shearstrength Clamping force Turn ideas into reality. d ’0 850N19’000 N N 28’500 N 5’000

mm Sleeve length L

mm Clamping zone mm strain

© SFS intec, iTI, 09/08, 900788, E Technical changes reserved Printed in Switzerland