M7 PA9048P User Manual

Total Page：16

File Type：pdf, Size：1020Kb

PA-9048 User's Manual Dimensions 59mm x158mm(2-11/32 x 6-3/16 inch) Net Weight 318g=0.70 lbs Gross Weight 368g=0.81 lbs PA-9048 Nosepiece 2.4mm(3/32),3.2mm(1/8) 4.0mm(5/32),4.8mm(3/16) Hex Shank 1/4" (6.35 mm) RIVETER ADAPTOR Cordless Drill 12V 14.4V 18V Reversible electric 3/8"Drill Reversible pneumatic 3/8"Drill Min. Torque Strength 11 Nm = 8 ft/Ibs Max. rpm 1,000 rpm 1 5 2 4 Safety Instructions 3 3 PleasePlease notenote thethe followingfollowing safetysafety instructionsinstructions toto avoidavoid malfunctions,damagemalfunctions,damage or orphysical physical injury: injury: 1 Hex Shank 1/4 (6.35 mm) 2 Housing PA+GF 3 Nosepiece 2.4mm , 3.2mm, 4.0mm, 4.8mm 1.1.P lePleasease observe observe all safetysafety notes notes of theof the used used driving driving tool (drill.) 4 Sight Window Blind Rivet Loading tool(drill) 5 Wrench 1PC 2.2.A lwAlwaysays switch switch offoff the drivingdriving tool tool and and pull pu thell the power power plugplug before before maintaining maintaining the the blind blind rivet rivet attachment, attachment, e.g. e.g. changing the nose pieces or when not in use. changing the nose pieces or when not in use. Operational Instructions 3.3.Only Only use use the the blind blind rivet rivet attachment attachment as as indicated indicated in in this 1. Insert the rivet into the tool. manualthis manual for setting for setting blind nuts.blind Thenuts. unit The is unit not designedis not for 1 continuous,designed professionalfor continuous, use. professional use. 4.4.Always Always secure secure the the work work piece. piece. 5.5.Do Do not not we wearar lolooseose clot clothinghing oror jewellry.jewellry. Tie Tie up up hair ha orir or clothingclothing so so it cannotit cannot get get caught caught in inmoving moving parts. parts. 2 2. Position the rivet into the hole. 6.6.Only Only use use the the bli blindnd rivetrivet attacattachmenthment with thethe includedincluded Ensure the drill is in forwards gear. nosepieces.nosepieces. While holding the body of the attachment with the handle to stop it 7.7.Should Should the the unit unit become become damaged damaged do do not not use use it itand and have from rotating, press the trigger. it haverepair ited repaired by a prbyofess a professionalional or contact or contact our our customer This will fasten the rivet. suppcustomerort dep supportartment. department. Do not disass Do embnot disassemblele the unit or the try repairingunit or try it yourself. repairing it yourself. 3 3. IMPORTANT!! Change the drill to reverse. While 8. Suitable for aluminium, aluminium / steel and all steel still holding the body of the rivets. attachment with the handle to stop it from rotating, press trigger. 9. Not suitable for stainless steel rivets. This will eject the mandrel. 10. Not for use with impact drivers or drills in hammer mode. View the demonstration video at www.mighty-seven.com .

Copy Link

Recommended publications

Overview of Current Challenges in Self-Pierce Riveting of Lightweight Materials †
Proceedings Overview of Current Challenges in Self-Pierce Riveting of Lightweight Materials † Mathias Jäckel *, Thomas Grimm, Ronald Niegsch and Welf-Guntram Drossel Department Mechanical Joining of the Fraunhofer Institute for Machine Tools and Forming Technology IWU, Nöthnitzer Str. 44, 01187 Dresden, Germany; [email protected] (T.G.); [email protected] (R.N.); [email protected] (W.-G.D.) * Correspondence: [email protected] † Presented at the 18th International Conference on Experimental Mechanics, Brussels, Belgium, 1–5 July 2018. Published: 9 May 2018 Abstract: This paper shows an overview of different analyses regarding current challenges at self-pierce riveting with solid rivets as well as semi-tubular rivets of lightweight materials like aluminum die casting, carbon fiber reinforced plastic and 7xxx series aluminum alloy. The joining process analyses will demonstrate the cause and the development as well as the influence on joint quality of individual joining process-induced defects. In addition, methods are described how these imperfections can be avoided or reduced. Keywords: mechanical joining; lightweight materials; self-pierce riveting 1. Introduction The importance of environment friendly mobility strengthens the need of lightweight design in the automotive industry. Due to this need, lightweight materials such as aluminum and carbon fiber reinforced plastics (CFRP) are used more and more in automotive car body constructions. According to the limited weldability, joining these materials by mechanical joining techniques such as self-pierce riveting with solid (SPR-S) or semi-tubular rivets (SRP-ST) has been established. The challenge in this regard is that these materials have limited forming capacities (e.g., aluminum die casting, CFRP) or vulnerability regarding stress corrosion cracking (e.g., 7xxx series aluminum alloy), while the joining processes locally induce large plastic deformations and tensile stresses.
[Show full text]
Metabo Introduces the 18V Brushless Rivet
Contact: Andrea Brogan Metabo Corp. Phone: (610) 436-5900 1231 Wilson Dr. Fax: (610) 436-9072 West Chester, PA 19380 [email protected] www.metabousa.com PRESS RELEASE Metabo introduces the 18V Brushless Blind Rivet Gun Compact, powerful and ergonomic solution for riveting July 2018 – West Chester, PA - Metabo Corporation, a leading international manufacturer of industrial grade cordless and corded power tools and accessories, introduces the 18V Brushless Blind Rivet Gun. The 18V Brushless Blind Rivet Gun (NP 18 LTX BL 5.0) is perfect for securing steel/stainless steel or aluminum in place. It can rivet up to 3/16” in steel and ¼” in aluminum. And with a compact 4.0 Ah LiHD (Lithium High Density) battery, it can secure 2,000 3/16” rivets on a single charge and has a pulling force of 2,250 lbs. “Metabo has thought of everything when creating this cordless tool. It is not only as fast as an air tool but is a problem solver on many levels. Metabo revolutionizes the sheet metal assembly process by making it cordless,” says Antoine Derché, Metabo’s Director of Product and Marketing. This one-handed rivet gun is extremely fast, lightweight and balanced for maximized ergonomics. It includes safety features, such as; hand protection guard, balancing loop, integrated nose piece storage and a LED light for illumining work. It also has a transparent container attached to the back for convenient storage of pins that doubles as a tool for quick changing nose pieces. The 18V Brushless Blind Cordless Rivet Gun, when combined with the Metabo 18V High-speed Drill (BE 18 LTX 6) creates a powerful duo for all your riveting needs! The 18V High-speed Drill has a no-load speed of 4,000 rpm, 35 inch lbs.
[Show full text]
ASTM-B-211 Aluminum
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: B211/B211M − 19 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire1 This standard is issued under the fixed designation B211/B211M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the U.S. Department of Defense. 1. Scope* 2.2 ASTM Standards:3 B221 Specification for Aluminum and Aluminum-Alloy Ex- 1.1 This specification2 covers rolled or cold-finished bar, truded Bars, Rods, Wire, Profiles, and Tubes rod, and wire in alloys (Note 1) and tempers as shown in Table B221M Specification for Aluminum and Aluminum-Alloy 2 [Table 3]. Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric) NOTE 1—Throughout this specification use of the term alloy in the B316/B316M Specification for Aluminum and Aluminum- general sense includes aluminum as well as aluminum alloy. Alloy Rivet and Cold-Heading Wire and Rods NOTE 2—The term cold finished is used to indicate the type of surface B557 Test Methods for Tension Testing Wrought and Cast finish, sharpness of angles, and dimensional tolerances produced by Aluminum- and Magnesium-Alloy Products drawing through a die.
[Show full text]
Blind Rivet Nuts Blind Rivet Nuts Easily Adaptable for Your Materials and Production Processes
Blind Rivet Nuts Blind Rivet Nuts Easily adaptable for your materials and production processes. Performance Fasteners For Versatile Assembly Everywhere that you need to join components reliably and efficiently the POP Avdel product range offers innovative fastening systems and the most suitable installation tools and assembly stations. Wherever you need high quality, load bearing threads in thin materials, POP Avdel Blind Rivet Nut Systems offer the ideal solution. Installation Quickly and reliably installed without rework or damage to the parent application, even with painted sheet materials and tubes where there is no blind side access. Applications Our blind rivet nuts are most commonly used in the automotive, vehicle, electronics chassis manufacturing, equipment manufacturing and shipbuilding industries. The wide variety of POP Avdel blind rivet nuts provides perfect engineering results and economic solutions in every application. Mission STANLEY Engineered Fastening provides assembly systems that simplify your production process and improve the quality of your products. We are not just a provider of fasteners and equipment, together we are a design and development partner for our customers engineering teams. - 2 - stanleyengineeredfastening.com Table of Contents Systems Range Overview Blind Rivet Nuts 4 Benefits of Assembly 5 Design Features and Benefits 6 Customised Designs 7 Design Parameters 8 Selecting a Blind Rivet Nut 9 Selection Guide 10-12 The Range of POP Avdel Eurosert® 13 Blind Rivet Nuts Nutsert® 14 Hexsert®/Euro Hexsert®
[Show full text]
Magnesium Casting Technology for Structural Applications
Available online at www.sciencedirect.com Journal of Magnesium and Alloys 1 (2013) 2e22 www.elsevier.com/journals/journal-of-magnesium-and-alloys/2213-9567 Full length article Magnesium casting technology for structural applications Alan A. Luo a,b,* a Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA b Department of Integrated Systems Engineering, The Ohio State University, Columbus, OH, USA Abstract This paper summarizes the melting and casting processes for magnesium alloys. It also reviews the historical development of magnesium castings and their structural uses in the western world since 1921 when Dow began producing magnesium pistons. Magnesium casting technology was well developed during and after World War II, both in gravity sand and permanent mold casting as well as high-pressure die casting, for aerospace, defense and automotive applications. In the last 20 years, most of the development has been focused on thin-wall die casting ap- plications in the automotive industry, taking advantages of the excellent castability of modern magnesium alloys. Recently, the continued expansion of magnesium casting applications into automotive, defense, aerospace, electronics and power tools has led to the diversiﬁcation of casting processes into vacuum die casting, low-pressure die casting, squeeze casting, lost foam casting, ablation casting as well as semi-solid casting. This paper will also review the historical, current and potential structural use of magnesium with a focus on automotive applications. The technical challenges of magnesium structural applications are also discussed. Increasing worldwide energy demand, environment protection and government regulations will stimulate more applications of lightweight magnesium castings in the next few decades.
[Show full text]
Alloys for Pressure Die Casting RHEINFELDEN ALLOYS
Primary Aluminium Alloys for Pressure Die Casting RHEINFELDEN ALLOYS Table of contents RHEINFELDEN ALLOYS – Aluminium Alloys for Pressure Die Casting General 2 ALUMINIUM RHEINFELDEN group 3 RHEINFELDEN FAST ALLOYS 4 Forms of delivery 5 Customer support and research and development 6 – 7 Aluminium casting alloys by RHEINFELDEN ALLOYS 8 – 9 Profile of the alloys for the die casters 10 Publications Alloys 11 – 20 Castasil ®-37 – AlSi9MnMoZr 21 – 24 Castasil ®-21 – AlSi9Sr 25 – 36 Silafont ®-36 – AlSi10MnMg 37 – 38 Silafont ®-38 – AlSi9MnMgZn 39 – 40 Castaman ®-35 – AlSi10MnMg 41 – 42 Thermodur ®-72/-73 – AlMg7Si3Mn – AlSi11Cu2Ni2Mg2Mn 43 – 53 Magsimal ®-59 – AlMg5Si2Mn Processing datasheets 54 Technical informations / Processing datasheets 55 Castasil ®-37 56 Castasil ®-21 57 Silafont ®-36 58 Silafont ®-38 59 Thermodur ®-72 60 Magsimal ®-59 Technical information 61 – 62 Surface coating 63 Joining techniques for die castings 64 Eight target levels for HPDC 65 Disclaimer and imprint 1 ALUMINIUM RHEINFELDEN group “Progress by tradition” Our policy ALUMINIUM RHEINFELDEN group: This history of aluminium Our RHEINFELDEN ALLOYS GmbH & Co. KG innovative char- in Germany started at Rheinfelden. In 1898 Europe’s first acter is what allows us to adapt rapidly to fast changing market river power station brought about the establishment of the first needs. The agility of a private family owned operated company, aluminium smelter in Germany, at Rheinfelden, Baden. the central geographic location in the European cast metal The company has always operated in three business segments market, the know-how and experience of our team, are factors and in October 2008 restructuring turned ALUMINIUM making a difference for Customers looking for reliable tradition RHEINFELDEN GmbH into a holding company and the former and modern innovation.
[Show full text]
Hydraulic Tools Riveting Machines
EN 2.004.0 / 02.19 Riveting Machines Riveting Hydraulic Tools EN 2.004.0 / 02.19 Your partner for expertise in components, complete systems and service With more than 9,000 employees, 48 subsidiaries and over 500 sales and service partners worldwide, we are in close contact with our customers, HYDAC SERVICENTER providing engineering advice, production, installation and service. Robust, durable and extremely versatile Riveting can be used to join various materials. This method can be used regardless of the chemical composition or any previous surface treatment of the parts that are to be joined. It is also possible to join more than two components. A rivet connection is a permanent connection, so the connected parts can only be separated by destroying the rivet. The rivet is the simplest and the cheapest connection element. A rivet connection is a permanent bond and can be created without sparks or vapours being generated, unlike a weld, for example. Complete systems and individual components Our service portfolio includes extensive consultation, calculation, modelling, design and construction for all types of mobile and stationary hydraulic systems for cold- and hot-riveting. The range of services that we provide also includes commissioning on the customer’s premises and comprehensive after-sales and spare part support. Production Design LIFE CYCLE MANAGEMENT Engineering Services 02.19 / EN 2.004.0 2 Mobile riveting machines The diverse range of applications for mobile riveting machines covers: l Lorry frame construction l Wagon construction l Pylons l Bridge building and similar applications. Our mobile riveting machines are particularly useful for complex geometries and hard-to-access areas.
[Show full text]
Index Rivets & Inserts
IBS, INCORPORATED IBS, INCORPORATED Index Rivets & Inserts T Thread Inserts A Helical Coarse W-23 Fine W-23 Accessories General Information W-22 Heavy Duty Nutsert Tool Installation W-22 Mandrels & Nosepieces W-16 Kits, Coarse W-23 Rivet Nut Gun Kits, Fine W-23 Mandrels & Nosepieces W-19, W-23, W-24, W-25, Kits, Metric W-23 W-26, W-27 Metric W-23 R Assortments Nutserts R Nutserts Knurled W-17 Aluminum Nutserts W-18 Steel & Aluminum W-16 I Knurled Nutserts W-18 Thread Repair I Rivets, Pop Heavy Wall W-25 V Aluminum W-7 Installation & Removal W-24 V Multi-Grip Rivets W-12 Self-Tapping Threaded Inserts W-20 Multi-Grip & Tri-Fold Rivets W-12 Thin Wall W-26 E Steel W-7 Tools E Thread Inserts Hand T Thread Repair Rivet Nut Gun Mandrels & Nosepieces W-19 T Fill-In Segments W-27 Heavy Duty Nutsert Tool W-16 Self-Tapping Threaded Inserts W-21 Mandrels & Nosepieces W-16 S with Cabinets W-27 RiveDrill™ Riveter Drill Attachment W-11 S Rivet Nut Gun W-19 & B Mandrels & Nosepieces W-19 & Back-Up Washers Swivel Head Professional Rivet Tool W-8 I Aluminum Round W-8 I N N Nutsert Tool N Heavy Duty W-16 S S R E RiveDrill™ Riveter Drill Attachment W-11 E Riveters Rivet Nut Gun W-19 R Swivel Head Professional Rivet Tool W-8 R Rivet Nuts T Flanged W-14 T “Nutsert” W-16 Systems & Installation W-13 S “Thin Skin” W-15 S Rivets, Buttonhead W-4 Alum.
[Show full text]
Rivet Handbook
RIVET HANDBOOK BLIND RIVETS RIVET HANDBOOK Introduction 5a Rivet Fastening Explanation of “blind” side fastening Concepts Installation Grip Range Break Loads Galvanic Corrosion Removal of Blind Rivets Standards 5b Rivets Material types Sizes and codes Mechanical properties Head types Special types 5c Rivet Tools Hand tools Pneumatic tools PAGE 2 RIVET BLIND RIVETS HANDBOOK 5a Rivet Fastening Concepts Introduction • Although bolting is the most common from of fastening in the world, it is restricted in usage because of the need to screw a nut on the end. There are many applications where the back of the job cannot be accesses, such as fastening to tubing or walls. • In these cases, the most common solution is to use Blind Rivets to fasten the job. Blind rivets are termed so because there is no need for access to the rear or ‘blind’ side of the joint. • The use of rivets in fastening most applications has been proven to be superior and extremely cost effective when compared with other methods of fastening. Welding, sheet metal screws, bolts and nuts and solid rivets all require extensive labour. There are three main reasons why blind rivets are used. 1. Low Installed cost. Up to 15 rivets per minute can be installed without any specialised labour. The unit cost is also much lower than other types of fastener. 2. Versatility Blind rivets are available in many types, sizes and materials to meet the requirements of the most demanding applications. 3. Reliability Materials are permanently clamped and provided the correct rivet is used can withstand severe vibration and environmental conditions.
[Show full text]
Rivet Quality in Robotic Installation
Ad89-640 Rivet Quality in Robotic Installation Authors John Hartmann, Peter Zieve - Electroimpact Inc. ABSTRACT The concentric technology drill, insert and upset end effector opens up new avenues of riveting automation. A complete riveting cycle can be performed through a continuous clampup with a compact end effector. The drill motor is placed in the center of the electromagnetic riveting head. This eliminates the requirement for a bulky shuttle mechanism. Proposed applications for this technology are discussed. Aerospace companies have been concerned about the certification of rivets formed with the electromagnetic impulse process. Electroimpact now has both interference and fatigue results from tests independently performed by several aerospace companies. The results are quite favorable if the correct forming parameters are employed. These results are presented to the extent that release can be secured from the sponsoring companies. Electroimpact also has an in house fatigue testing capability which supplements the test results. For example flat forming dies yield inadequate interference and mediocre fatigue results. The use of cupped forming dies is extremely preferential when employing this process. The process variables which must be controlled when employing the Electroimpact process are outlined. INTRODUCTION The significant increase in demand for aircraft in the late 1980’s has led aircraft manufacturers to look for means of increasing production speed. In addition the Aloha Airlines accident has increased the awareness of fastener fatigue. Electromagnetic riveting systems provide solutions in these two areas. The lightweight and low recoil of the Low Voltage Electromagnetic Riveter (LVER) allows use of robots or positioners considerably lighter than required by hydraulic squeeze presses.
[Show full text]
Encyclopedia of Aluminum and Its Alloys, First Edition DOI: 10.1201/9781351045636-140000309 Copyright © 2018 by Taylor & Francis
Field Trials of Aerospace Fasteners in Mechanical and Structural Applications George Nadim Melhem School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052 Australia: Perfect Engineering Pty Ltd, 14 Dick St, Henley, NSW 2111 Paul Richard Munroe and Charles Christopher Sorrell School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052, Australia Alsten Clyde Livingstone School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, NSW 2007, Australia; Perfect Engineering Pty. Ltd., 14 Dick Street, Henley, NSW 2111, Australia Abstract The present work reports ﬁndings for the application of specialized aerospace aluminum rivets, manufactured from Al 7075 (Al-Zn-Mg-Cu) T6 alloy stem/mandrel, with an Al 5056 (Al-Mg) shank or sleeve, which were used for construction rectiﬁcation of an outdoor louver façade on a high-rise building. These specialized rivets were used to replace failed conventional construc- tion rivets, which consisted of sleeve and mandrel comprised of either all-steel, all-aluminum, or aluminum-steel. The building is in close vicinity to the ocean and exposed to extremely high wind loading, making the rivets susceptible to failure by corrosion and fatigue. The focus of the present work is to report the examination of the specialized replacement rivets following an in-service lifetime of 12 years. The examination revealed that the replacement rivets (mandrel and sleeve) remained intact and uncontaminated, essentially free of corrosion. It is likely that sunlight exposure and the composite nature of the rivets enhanced the performance through age hardening. Analysis of the rivets included visual inspection, optical microscopy, Vickers microhardness testing, and transmission electron microscopy.
[Show full text]
Huck Full Line Catalog.Pdf
Lockbolts, Structural Blind Fasteners and Tooling Holding Your World Together Howmet Fastening Systems 3 Huck® is more than just high-strength fasteners. We provide solutions for preci- sion-engineered, vibration-resistant joining. Whether it’s designed for parabolic troughs or for reliable, cost-effective fleet maintenance, Huck is the strongest, most trusted fastening solution in the world. We are proud to offer you the full Huck line with flexible, convenient ordering options. Table of Contents HuckBolt® 4 Magna-Bulb® 35 BobTail® 7 HuckLok® 38 C50L® 12 Auto-Bulb® 41 C6L® 16 Magna-Tite® 43 Magna-Grip® 21 BOM® 46 Hucktainer® 25 FloorTight® 49 Huck Structural Blind Rivets 30 Huck® Tools 52 Magna-Lok® 31 4 Huck® HuckBolts® It’s the proven reliable, vibration-resistant locking performance that has made the Huck® brand famous. You’ll find it in every HuckBolt®. Delivering uniform, consistent clamp load and high shear and tensile strength, HuckBolts are ideal for applications ranging from general manufacturing to high-vibration environments such as HVAC, trailer and container assembly, rotating equipment, shopping carts, railroad and transit cars, geodesic structures, and many others. HuckBolts feature an exclusive locking groove design that ensures a tight, permanent fit. In addition to superior fastening performance regardless of which lockbolt type you require, HuckBolts have been proven to reduce labor and installation costs, along with rework and warranty expenses. Stronger, easier to install, and more durable than welding, adhesives, or conventional threaded fastening systems, HuckBolts have been the professionals’ choice for decades. Howmet Fastening Systems 5 A Strong Family of Fasteners Engineered for a wide range of applications, HuckBolts de- liver superior joining strength, shear, and tensile strength for an unmatched fastening solution.
[Show full text]