6630 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices

Records generated from this meeting ADDRESSES: The Department of Commerce, 1401 Constitution Avenue may be inspected and reproduced at the Commerce’s FY 2018 Service Contract NW, Washington, DC 20230; telephone: Regional Programs Unit Office, as they Inventory is included in the (202) 482–0698. become available, both before and after government-wide inventory available at: SUPPLEMENTARY INFORMATION: the meeting. Records of the meeting will https://www.acquisition.gov/service- be available via https:// contract-inventory, which can be Background www.facadatabase.gov/FACA/ filtered to display the FY 2018 Commerce published the Preliminary FACAPublicViewCommitteeDetails?id= inventory for each agency. In addition to Results of this administrative review in a10t0000001gzlZAAQ under the the link to access DOC’s FY 2018 service the Federal Register on August 5, 2020.1 Commission on Civil Rights, Illinois contract inventory, the FY 2017 We invited parties to comment on the Advisory Committee link. Persons Analysis Report and Plan for analyzing Preliminary Results. No interested party interested in the work of this Committee the FY 2018 data is on the Office of submitted comments or requested a are directed to the Commission’s Acquisition Management homepage at hearing in this administrative review. website, http://www.usccr.gov, or may the following link http:// On April 24, 2020, Commerce tolled all contact the Regional Programs Unit at www.osec.doc.gov/oam/. OFPP’s deadlines in administrative reviews by the above email or street address. guidance memo on service contract 50 days.2 On July 21, 2020, Commerce inventories is available at: http:// tolled all deadlines in administrative Agenda www.whitehouse.gov/sites/default/files/ reviews by an additional 60 days,3 I. Welcome & Roll Call omb/procurement/memo/service- thereby extending the deadline for these II. Chair’s comments contract-inventories-guidance- final results until January 19, 2021. III. Discussion: Education Project 11052010.pdf. Commerce conducted this review in IV. Next Steps FOR FURTHER INFORMATION CONTACT: accordance with section 751(a)(1)(A) of V. Public Comment the Tariff Act of 1930, as amended (the VI. Adjournment Questions regarding the service contract inventory should be directed to Virna Act). Dated: January 15, 2021. Winters, Director for Acquisitions Scope of the Order David Mussatt, Policy and Oversight Division at 202– The merchandise covered by the order Supervisory Chief, Regional Programs Unit. 482–4248 or [email protected]. [FR Doc. 2021–01388 Filed 1–21–21; 8:45 am] is aluminum extrusions from . The Barry E. Berkowitz, complete description of the scope is BILLING CODE;P Senior Procurement Executive and Director, provided at Appendix I of this notice. Office of Acquisition Management. Changes Since the Preliminary Results [FR Doc. 2021–01308 Filed 1–21–21; 8:45 am] DEPARTMENT OF COMMERCE As no party submitted comments on BILLING CODE P the Preliminary Results, Commerce Office of the Secretary made no changes for these final results [Docket No.: 200723–0198] DEPARTMENT OF COMMERCE of review. Rescission of Review Public Availability of Department of International Trade Administration Commerce FY 2018 Service Contract In the Preliminary Results, we stated Inventory Data [C–570–968] our intention to rescind the review with respect to companies named in the AGENCY: Office of the Secretary, Aluminum Extrusions From the Initiation Notice for which all review Department of Commerce. People’s Republic of China: Final Results of Countervailing Duty requests were timely withdrawn in ACTION: Notice of Public Availability of accordance with 19 CFR 351.213(d)(1). Administrative Review and Rescission FY 2018 Service Contract Inventories These companies are listed in Appendix of Review, in Part; 2018 Data. II of this notice. For these companies, SUMMARY: In accordance with Section AGENCY: Enforcement and Compliance, Commerce is rescinding the 743 of Division C of the Consolidated International Trade Administration, administrative review and will assess Appropriations Act of 2010 (Pub. L. Department of Commerce. duties at rates equal to the rates of the 111–117), the Department of Commerce SUMMARY: The Department of Commerce cash deposits for estimated (DOC) is publishing this notice to advise (Commerce) has completed its countervailing duties required at the the public of the availability of the administrative review of the time of entry, or withdrawn from Fiscal Year (FY) 2018 Service Contract countervailing duty (CVD) order on warehouse, for consumption, during the Inventory data, a report that analyzes aluminum extrusions from the People’s POR, in accordance with 19 CFR 4 DOC’s FY 2017 Service Contract Republic of China (China) for the period 351.212(c)(1). Inventory and a plan for the analysis of of review (POR) January 1, 2018 through 1 FY 2018 Service Contract Inventory. December 31, 2018, and determines that See Aluminum Extrusions from the People’s countervailable subsidies are being Republic of China: Preliminary Results of the The service contract inventory Countervailing Duty Administrative Review, provides information on service contract provided to producers and exporters of Rescission of Review, in Part, and Intent to Rescind, actions over $150,000 made in FY 2018. aluminum extrusions. The final net in Part; 2018, 85 FR 47349 (August 5, 2020) The information is organized by countervailable subsidy rates are listed (Preliminary Results), and accompanying Preliminary Decision Memorandum. function to show how contracted below in the section titled ‘‘Final Results of Administrative Review.’’ 2 See Memorandum, ‘‘Tolling of Deadlines for resources are distributed throughout the Antidumping and Countervailing Duty agency. The inventory has been DATES: Applicable January 22, 2021. Administrative Reviews in Response to Operational developed in accordance with guidance FOR FURTHER INFORMATION CONTACT: Adjustments Due to COVID–19,’’ dated April 24, on service contract inventories issued Davina Friedmann, AD/CVD 2020. 3 See Memorandum, ‘‘Tolling of Deadlines for on November 5, 2010, by the Office of Operations, Office VI, Enforcement and Antidumping and Countervailing Duty Management and Budget’s Office of Compliance, International Trade Administrative Reviews,’’ dated July 21, 2020. Federal Procurement Policy (OFPP). Administration, U.S. Department of 4 See Preliminary Results, 85 FR 47349, 47350.

VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 PO 00000 Frm 00019 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices 6631

Final Results of Administrative Review disclosed under APO in accordance extrusions include, but are not limited to, with 19 CFR 351.305(a)(3), which extrusions that are mill finished (i.e., without In accordance with 19 CFR any coating or further finishing), brushed, 351.221(b)(5), we determine the continues to govern business proprietary information in this segment buffed, polished, anodized (including following final net subsidy rates for the brightdip anodized), liquid painted, or 2018 administrative review: 5 of the proceeding. Timely written powder coated. Aluminum extrusions may notification of return or destruction of also be fabricated, i.e., prepared for assembly. Final APO materials or conversion to judicial Such operations would include, but are not Company ad valorem protective order is hereby requested. limited to, extrusions that are cut-to-length, rate Failure to comply with the regulations machined, drilled, punched, notched, bent, (percent) and the terms of an APO is a stretched, knurled, swedged, mitered, sanctionable violation. chamfered, threaded, and spun. The subject Activa International Inc ...... 242.15 merchandise includes aluminum extrusions Changzou Tenglong Auto Parts Notification to Interested Parties that are finished (coated, painted, etc.), Co. Ltd ...... 16.08 We are issuing and publishing these fabricated, or any combination thereof. CRRC Changzhou Auto Parts Subject aluminum extrusions may be Co. Ltd ...... 242.15 results in accordance with sections described at the time of importation as parts Aoda Aluminum Co. 751(a)(1) and 777(i)(1) of the Act. for final finished products that are assembled Ltd ...... 16.08 after importation, including, but not limited Xingfa Aluminum Dated: January 13, 2021. Jeffrey I. Kessler, to, window frames, door frames, solar panels, Co., Ltd ...... 242.15 curtain walls, or furniture. Such parts that Precision Metal Works Ltd ...... 242.15 Assistant Secretary for Enforcement and otherwise meet the definition of aluminum Compliance. extrusions are included in the scope. The Assessment Rates Appendix I scope includes the aluminum extrusion In accordance with 19 CFR components that are attached (e.g., by Scope of the Order 351.212(b)(2), Commerce intends to welding or fasteners) to form subassemblies, { } i.e., partially assembled merchandise unless issue appropriate assessment The merchandise covered by the order s is aluminum extrusions which are shapes imported as part of the finished goods ‘kit’ instructions to U.S. Customs and Border and forms, produced by an extrusion process, defined further below. The scope does not Protection (CBP) 15 days after made from aluminum alloys having metallic include the non-aluminum extrusion publication of these final results of elements corresponding to the alloy series components of subassemblies or subject kits. review, to liquidate shipments of subject designations published by The Aluminum Subject extrusions may be identified with merchandise produced and/or exported Association commencing with the numbers reference to their end use, such as fence by the companies listed above, entered, 1, 3, and 6 (or proprietary equivalents or posts, electrical conduits, door thresholds, or withdrawn from warehouse, for other certifying body equivalents). carpet trim, or heat sinks (that do not meet consumption on or after January 1, 2018 Specifically, the subject merchandise made the finished heat sink exclusionary language below). Such goods are subject merchandise through December 31, 2018, at the ad from aluminum alloy with an Aluminum Association series designation commencing if they otherwise meet the scope definition, valorem rates listed above. with the number 1 contains not less than 99 regardless of whether they are ready for use Cash Deposit Requirements percent aluminum by weight. The subject at the time of importation. merchandise made from aluminum alloy The following aluminum extrusion In accordance with section 751(a)(1) with an Aluminum Association series products are excluded: aluminum extrusions of the Act, Commerce will instruct CBP designation commencing with the number 3 made from aluminum alloy with an to collect cash deposits of estimated contains manganese as the major alloying Aluminum Association series designations countervailing duties in the amounts element, with manganese accounting for not commencing with the number 2 and shown for each of the respective more than 3.0 percent of total materials by containing in excess of 1.5 percent copper by companies listed above for shipments of weight. The subject merchandise is made weight; aluminum extrusions made from subject merchandise entered, or from an aluminum alloy with an Aluminum aluminum alloy with an Aluminum Association series designation commencing Association series designation commencing withdrawn from warehouse, for with the number 6 contains magnesium and with the number 5 and containing in excess consumption on or after the date of silicon as the major alloying elements, with of 1.0 percent magnesium by weight; and publication of these final results of magnesium accounting for at least 0.1 aluminum extrusions made from aluminum review. For all non-reviewed firms, we percent but not more than 2.0 percent of total alloy with an Aluminum Association series will instruct CBP to collect cash materials by weight, and silicon accounting designation commencing with the number 7 deposits of estimated countervailing for at least 0.1 percent but not more than 3.0 and containing in excess of 2.0 percent zinc duties at the most recent company- percent of total materials by weight. The by weight. specific or all-others rate applicable to subject aluminum extrusions are properly The scope also excludes finished the company, as appropriate. These cash identified by a four-digit alloy series without merchandise containing aluminum either a decimal point or leading letter. extrusions as parts that are fully and deposit requirements, when imposed, Illustrative examples from among the permanently assembled and completed at the shall remain in effect until further approximately 160 registered alloys that may time of entry, such as finished windows with notice. characterize the subject merchandise are as glass, doors with glass or vinyl, picture Administrative Protective Order follows: 1350, 3003, and 6060. frames with glass pane and backing material, Aluminum extrusions are produced and and solar panels. The scope also excludes This notice serves as a reminder to imported in a wide variety of shapes and finished goods containing aluminum parties subject to administrative forms, including, but not limited to, hollow extrusions that are entered unassembled in a protective order (APO) of their profiles, other solid profiles, pipes, tubes, ‘‘finished goods kit.’’ A finished goods kit is responsibility concerning the bars, and rods. understood to mean a packaged combination destruction of proprietary information Aluminum extrusions that are drawn of parts that contains, at the time of subsequent to extrusion (drawn aluminum) importation, all of the necessary parts to fully are also included in the scope. assemble a final finished good and requires 5 See Preliminary Results; see also Memorandum, Aluminum extrusions are produced and no further finishing or fabrication, such as ‘‘Administrative Review of Countervailing Duty Order on Aluminum Extrusions from the People’s imported with a variety of finishes (both cutting or punching, and is assembled ‘‘as is’’ Republic of China: AFA Calculation Memorandum coatings and surface treatments), and types of into a finished product. An imported product for the Preliminary Results of Review; 2018,’’ dated fabrication. The types of coatings and will not be considered a ‘‘finished goods kit’’ August 28, 2020. treatments applied to subject aluminum and therefore excluded from the scope of the

VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 PO 00000 Frm 00020 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES 6632 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices

order{s} merely by including fasteners such 8302.49.60.55, 8302.49.60.85, 8302.50.00.00, 26. Changzhou Changzhen Evaporator Co., as screws, bolts, etc. in the packaging with 8302.60.90.00, 8305.10.00.50, 8306.30.00.00, Ltd. an aluminum extrusion product. 8414.59.60.90, 8415.90.80.45, 8418.99.80.05, 27. Changzhou Tenglong Auto Accessories The scope also excludes aluminum alloy 8418.99.80.50, 8418.99.80.60, 8419.90.10.00, Manufacturing Co. Ltd. sheet or plates produced by other than the 8422.90.06.40, 8473.30.20.00, 8473.30.51.00, 28. Changzhou Tenglong Auto Parts Co. extrusion process, such as aluminum 8479.90.85.00, 8486.90.00.00, 8487.90.00.80, Ltd. products produced by a method of casting. 8503.00.95.20, 8508.70.00.00, 8515.90.20.00, 29. China Square Cast aluminum products are properly 8516.90.50.00, 8516.90.80.50, 8517.70.00.00, 30. China Square Industrial Co. identified by four digits with a decimal point 8529.90.73.00, 8529.90.97.60, 8536.90.80.85, 31. China Square Industrial Ltd. between the third and fourth digit. A letter 8538.10.00.00, 8543.90.88.80, 8708.29.50.60, 32. China Zhongwang Holdings, Ltd. may also precede the four digits. The 8708.80.65.90, 8803.30.00.60, 9013.90.50.00, 33. Chiping One Stop Industrial & Trade following Aluminum Association 9013.90.90.00, 9401.90.50.81, 9403.90.10.40, Co., Ltd. designations are representative of aluminum 9403.90.10.50, 9403.90.10.85, 9403.90.25.40, 34. Classic & Contemporary Inc. alloys for casting: 208.0, 295.0, 308.0, 355.0, 9403.90.25.80, 9403.90.40.05, 9403.90.40.10, 35. Clear Sky Inc. C355.0, 356.0, A356.0, A357.0, 360.0, 366.0, 9403.90.40.60, 9403.90.50.05, 9403.90.50.10, 36. Coclisa S.A. de C.V. 380.0, A380.0, 413.0, 443.0, 514.0, 518.1, and 9403.90.50.80, 9403.90.60.05, 9403.90.60.10, 37. Cosco (J.M.) Aluminum Co., Ltd. 712.0. The scope also excludes pure, 9403.90.60.80, 9403.90.70.05, 9403.90.70.10, 38. Cosco (J.M.) Aluminum Development unwrought aluminum in any form. 9403.90.70.80, 9403.90.80.10, 9403.90.80.15, Co. Ltd. The scope also excludes collapsible tubular 9403.90.80.20, 9403.90.80.41, 9403.90.80.51, 39. Dalian Huacheng Aquatic Products containers composed of metallic elements 9403.90.80.61, 9506.11.40.80, 9506.51.40.00, 40. Dalian Liwang Trade Co., Ltd. corresponding to alloy code 1080A as 9506.51.60.00, 9506.59.40.40, 9506.70.20.90, 41. Danfoss Micro Channel Heat Exchanger designated by the Aluminum Association 9506.91.00.10, 9506.91.00.20, 9506.91.00.30, (Jia Xing) Co., Ltd. where the tubular container (excluding the 9506.99.05.10, 9506.99.05.20, 9506.99.05.30, 42. Daya Hardware Co Ltd. nozzle) meets each of the following 9506.99.15.00, 9506.99.20.00, 9506.99.25.80, 43. Dongguan Dazhan Metal Co., Ltd. dimensional characteristics: (1) Length of 37 9506.99.28.00, 9506.99.55.00, 9506.99.60.80, 44. Dongguan Golden Tiger Hardware millimeters (‘‘mm’’) or 62 mm, (2) outer 9507.30.20.00, 9507.30.40.00, 9507.30.60.00, Industrial Co., Ltd. diameter of 11.0 mm or 12.7 mm, and (3) 9507.90.60.00, and 9603.90.80.50. 45. Dongguang Aoda Aluminum Co., Ltd. wall thickness not exceeding 0.13 mm. The subject merchandise entered as parts 46. Dragonluxe Limited Also excluded from the scope of these 47. Dynabright International Group (HK) { } of other aluminum products may be order s are finished heat sinks. Finished classifiable under the following additional Ltd. heat sinks are fabricated heat sinks made Chapter 76 subheadings: 7610.10, 7610.90, 48. Dynamic Technologies China from aluminum extrusions the design and 7615.19, 7615.20, and 7616.99, as well as 49. ETLA Technology (Wuxi) Co. Ltd. production of which are organized around under other HTSUS chapters. In addition, fin 50. Ever Extend Ent. Ltd. meeting certain specified thermal evaporator coils may be classifiable under 51. Fenghua Metal Product Factory performance requirements and which have HTSUS numbers: 8418.99.80.50 and 52. First Union Property Limited been fully, albeit not necessarily 8418.99.80.60. While HTSUS subheadings 53. FookShing Metal & Plastic Co. Ltd. individually, tested to comply with such are provided for convenience and customs 54. Foreign Trade Co. of Suzhou New & requirements. purposes, the written description of the High-Tech Industrial Development Zone Also excluded from the scope of the scope of these order{s} is dispositive. 55. City Nanhai Hongjia Aluminum order{s} is certain rectangular wire produced Alloy Co., Ltd. from continuously cast rolled aluminum wire Appendix II 56. Foshan Golden Source Aluminum rod, which is subsequently extruded to Products Co., Ltd. dimension to form rectangular wire. The List of Companies for Which We Are 57. Foshan Guangcheng Aluminium Co., product is made from aluminum alloy grade Rescinding This Administrative Review Ltd. 1070 or 1370, with no recycled metal content 1. Acro Import and Export Co. 58. Foshan Jinlan Aluminum Co. Ltd. allowed. The dimensions of the wire are 5 2. Activa Leisure Inc. 59. Foshan JinLan Aluminum Co., Ltd. mm (+/- 0.05 mm) in width and 1.0 mm (+/ 3. Agilent Technologies Co. Ltd (China) 60. Foshan JMA Aluminum Company - 0.02 mm) in thickness. Imports of 4. Allied Maker Limited Limited rectangular wire are provided for under 5. Alnan Aluminum Co., Ltd. 61. Foshan Nanhai Niu Yuan Hardware HTSUS category 7605.19.000. 6. Alnan Aluminum Ltd. Product Co., Ltd. Imports of the subject merchandise are 7. Aluminicaste Fundicion de Mexico 62. Foshan Shunde Aoneng Electrical provided for under the following categories 8. AMC Limited Appliances Co., Ltd. of the Harmonized Tariff Schedule of the 9. AMC Ltd. 63. Foshan Shanshui Fenglu Aluminum United States (HTSUS): 7606.12.3091, 10. Anji Chang Hong Chain Manufacturing Co., Ltd. 7606.12.3096, 7604.21.0010, 7604.21.0090, 11. Anshan Zhongda Industry Co., Ltd. 64. Foshan Yong Li Jian Aluminum Co., 7604.29.1010, 7604.29.1090, 7604.29.3060; 12. Aoda Aluminium () Co., Ltd. 7604.29.3090; 7604.29.5050; 7604.29.5090; Limited 65. Fujian Sanchuan Aluminum Co., Ltd. 8541.90.00.00, 8708.10.30.50, 8708.99.68.90, 13. AsiaAlum Group 66. Fukang Aluminum & Plastic Import 6603.90.8100, 7616.99.51, 8479.89.94, 14. Atlas Integrated Manufacturing Ltd. and Export Co., Ltd. 8481.90.9060, 8481.90.9085, 9031.90.9195, 15. Bath Fitter 67. Fuzhou Sunmodo New Energy 8424.90.9080, 9405.99.4020, 9031.90.90.95, 16. Behr-Hella Thermocontrol (Shanghai) Equipment 7616.10.90.90, 7609.00.00, 7610.10.00, Co. Ltd. 68. Gaotang Xinhai Economy & Trade Co., 7610.90.00, 7615.10.30, 7615.10.71, 17. Belton (Asia) Development Limited Ltd. 7615.10.91, 7615.19.10, 7615.19.30, 18. Belton (Asia) Development Ltd. 69. Genimex Shanghai, Ltd. 7615.19.50, 7615.19.70, 7615.19.90, 19. Birchwoods (Lin’an) Leisure Products 70. Global Hi-Tek Precision Co. Ltd 7615.20.00, 7616.99.10, 7616.99.50, Co., Ltd. 71. Global PMX Dongguan Co., Ltd. 8479.89.98, 8479.90.94, 8513.90.20, 20. Bolnar Hong Kong Ltd. 72. Global Point Technology (Far East) 9403.10.00, 9403.20.00, 7604.21.00.00, 21. Bracalente Metal Products (Suzhou) Limited 7604.29.10.00, 7604.29.30.10, 7604.29.30.50, Co., Ltd. 73. Golden Dragon Precise Copper Tube 7604.29.50.30, 7604.29.50.60, 7608.20.00.30, 22. Brilliance General Equipment Co., Ltd. Group, Inc. 7608.20.00.90, 8302.10.30.00, 8302.10.60.30, 23. Changshu Changshen Aluminum 74. Gold Mountain International 8302.10.60.60, 8302.10.60.90, 8302.20.00.00, Products Co., Ltd. Development, Ltd. 8302.30.30.10, 8302.30.30.60, 8302.41.30.00, 24. Changshu Changsheng Aluminum 75. Gran Cabrio Capital Pte. Ltd. 8302.41.60.15, 8302.41.60.45, 8302.41.60.50, Products Co., Ltd. 76. Appliances 8302.41.60.80, 8302.42.30.10, 8302.42.30.15, 25. Changzhou Changzheng Evaporator 77. Green Line Hose & Fittings 8302.42.30.65, 8302.49.60.35, 8302.49.60.45, Co., Ltd. 78. GT88 Capital Pte. Ltd.

VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 PO 00000 Frm 00021 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices 6633

79. Guang Ya Aluminium Industries (HK) 126. Jiaxing Jackson Travel Products Co., 185. Shanghai Automobile Air Conditioner Ltd. Ltd. Accessories Ltd. 80. Guang Ya Aluminium Industries Co. 127. Jiaxing Taixin Metal Products Co., 186. Shanghai Automobile Air-Conditioner Ltd. Ltd. Accessories Co Ltd. 81. Guang Ya Aluminum Industries 128. Jiuyan Co., Ltd. 187. Shanghai Canghai Aluminum Tube Company Ltd. 129. JMA (HK) Company Limited Packaging Co., Ltd. 82. Guangcheng Aluminum Co., Ltd. 130. Johnson Precision Engineering 188. Shanghai Dofiberone Composites Co. 83. Guangdong Hao Mei Aluminum Co., (Suzhou) Co., Ltd. Ltd. Ltd. 131. Justhere Co., Ltd. 189. Shanghai Dongsheng Metal 84. Guangdong Jianmei Aluminum Profile 132. Kam Kiu Aluminum Products Sdn 190. Shanghai Shen Hang Imp & Exp Co., Company Limited Bhd Ltd. 85. Guangdong JMA Aluminum Profile 133. Kanal Precision Aluminum Product 191. Shanghai Tongtai Precise Aluminum Factory (Group) Co., Ltd. Co., Ltd. Alloy Manufacturing Co. Ltd. 86. Guangdong Midea 134. Karlton Aluminum Company Ltd. 192. Shanghai Top-Ranking Aluminum 87. Guangdong Midea Microwave and 135. Kong Ah International Company Products Co., Ltd. Electrical Appliances Limited 193. Shanghai Top-Ranking New Materials 88. Guangdong Nanhai Foodstuffs Imp. & 136. Kromet International Co., Ltd. Exp. Co., Ltd. 137. Kromet International Inc. 194. Hudson Technology 89. Guangdong Weiye Aluminum Factory 138. Kromet Intl Inc. Development Co. Co., Ltd. 139. Kunshan Giant Light Metal 195. Shenzhen Jiuyuan Co., Ltd. 90. Guangdong Whirlpool Electrical Technology Co., Ltd. 196. Shi Guo Yao Aluminum Co., Appliances Co., Ltd. 140. Liaoning Zhong Da Industrial Ltd. 91. Guangdong Xin Wei Aluminum Aluminum Co., Ltd. 197. Sincere Profit Products Co., Ltd. 141. Liaoning Zhongwang Group Co., Ltd. 198. Skyline Exhibit Systems (Shanghai) 92. Guangdong Yonglijian Aluminum Co., 142. Liaoyang Zhongwang Aluminum Co. Ltd. Ltd. Profile Co. Ltd. 199. Southwest Aluminum (Group) Co., 93. Guangdong Zhongya Aluminum 143. Longkou Donghai Trade Co., Ltd. Ltd. Company Ltd. 144. MAAX Bath Inc. 200. Springs Window Fashions De Victoria 94. Jangho Curtain Wall 145. MAHLE Holding (China) Co., Ltd. 201. Summit Plastics Nanjing Co. Ltd. System Engineering Co., Ltd. 146. Metal Tech Co Ltd. 202. Suzhou JRP Import & Export Co., Ltd. 203. Suzhou New Hongji Precision Part Co. 95. Guangzhou Mingcan Die-Casting 147. Metaltek Group Co., Ltd. 148. Metaltek Metal Industry Co., Ltd. 204. Tai-Ao Aluminum (Taishan) Co. Ltd. Hardware Products Co., Ltd. 149. Midea Air Conditioning Equipment 205. Taishan City Kam Kiu Aluminium 96. Hangzhou Xingyi Metal Products Co., Co., Ltd. Extrusion Co., Ltd. Ltd. 150. Midea Electric Trading Co., Pte Ltd. 206. Taitoh Machinery Shanghai Co. Ltd. 97. Hanwood Enterprises Limited 151. Midea International Trading Co., Ltd. 207. Taizhou Lifeng Manufacturing Co., 98. Hanyung Alcoba Co., Ltd. 152. Midea International Training Co., Ltd. Ltd. 99. Hanyung Alcobis Co., Ltd. 153. Miland Luck Limited 208. Taizhou United Imp. & Exp. Co., Ltd. 100. Hanyung Metal (Suzhou) Co., Ltd. 154. Nanhai Textiles Import & Export Co., 209. tenKsolar (Shanghai) Co., Ltd. 101. Hao Mei Aluminum Co., Ltd. Ltd. 210. Tianjin Ganglv Nonferrous Metal 102. Hao Mei Aluminum International Co., 155. New Asia Aluminum & Stainless Steel Materials Co., Ltd. Ltd. Product Co., Ltd. 211. Tianjin Jinmao Import & Export Corp., 103. Hebei Xusen Wire Mesh Products Co., 156. New Zhongya Aluminum Factory Ltd. Ltd. 157. Nidec Sankyo Singapore Pte. Ltd. 212. Tianjin Ruxin Electric Heat 104. Henan New Kelong Electrical 158. Nidec Sankyo (Zhejang) Corporation Transmission Technology Co., Ltd. Appliances Co., Ltd. 159. Nidec Sankyo Zhejiang Corporation 213. Tianjin Xiandai Plastic & Aluminum 105. Henan Zhongduo Aluminum 160. Ningbo Coaster International Co., Ltd. Products Co., Ltd. Magnesium New Material Co., Ltd. 161. Ningbo Hi Tech Reliable 214. Tiazhou Lifeng Manufacturing 106. Hitachi High-Technologies (Shanghai) Manufacturing Company Corporation Co., Ltd. 162. Ningbo Innopower Tengda Machinery 215. Top-Wok Metal Co., Ltd. 107. Hong Kong Gree Electric Appliances 163. Ningbo Ivy Daily Commodity Co., Ltd. 216. Traffic Brick Network, LLC Sales Limited 164. Ningbo Yili Import and Export Co., 217. Union Aluminum (SIP) Co. 108. Hong Kong Modern Non-Ferrous Ltd. 218. Union Industry (Asia) Co., Ltd. Metal 165. North China Aluminum Co., Ltd. 219. USA Worldwide Door Components 109. Honsense Development Company 166. North Fenghua Aluminum Ltd. (Pinghu) Co., Ltd. 110. Hui Mei Gao Aluminum Foshan Co., 167. Northern States Metals 220. Wenzhou Shengbo Decoration & Ltd. 168. PanAsia Aluminum (China) Limited Hardware 111. Huixin Aluminum 169. PENCOM Dongguan China 221. Whirlpool Canada L.P. 112. IDEX Dinglee Technology (Tianjin) 170. Pengcheng Aluminum Enterprise Inc. 222. Whirlpool (Guangdong) Co., Ltd. 171. Permasteelisa Hong Kong Ltd. 223. Whirlpool Microwave Products 113. IDEX Health 172. Permasteelisa South China Factory Development Ltd. 114. IDEX Technology Suzhou Co., Ltd. 173. Pingguo Aluminum Company Limited 224. Wonjin Autoparts 115. Innovative Aluminum (Hong Kong) 174. Pingguo Asia Aluminum Co., Ltd. 225. Worldwide Door Components, Inc. Limited 175. Popular Plastics Company Limited 226. WTI Building Products, Ltd. 116. iSource Asia 176. Press Metal International Ltd. 227. Wuxi Lutong Fiberglass Doors Co., 117. Jackson Travel Products Co., Ltd. 177. Qingdao Sea Nova Building Ltd. 118. Jangho Curtain Wall Hong Kong Ltd. 178. Samuel, Son & Co., Ltd. 228. Xinchang Yongqiang Air Conditioning 119. Jianghai Foreign Ent. Gen. 179. Sanchuan Aluminum Co., Ltd. Accessories Co., Ltd. 120. Jiangmen Jianghai Foreign 180. Sanhua (Hangzhou) Micro Channel 229. Xin Wei Aluminum Co. Economic Enterprise Corp. Ltd. Heat Exchanger Co., Ltd. 230. Xin Wei Aluminum Company Limited 121. Jiangmen Qunxing Hardware 181. Shandong Fukang Aluminum & 231. Xinya Aluminum & Stainless Steel Diecasting Co., Ltd. Plastic Co. Ltd. Product Co., Ltd. 122. Jiangsu Changfa Refrigeration Co. 182. Shandong Huajian Aluminum Group 232. Yuyao Fanshun Import & Export Co., 123. Jiangyin Suncitygaylin 183. Shangdong Huasheng Pesticide Ltd. 124. Jiangyin Trust International Inc. Machinery Co. 233. Yuyao Haoshen Import & Export 125. Jiangyin Xinhong Doors and Windows 184. Shangdong Nanshan Aluminum Co., 234. Zahoqing China Square Industry Co., Ltd. Ltd. Limited

VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 PO 00000 Frm 00022 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES 6634 Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices

235. Asia Aluminum Factory at: https://attendee.gotowebinar.com/ Although non-emergency issues not Company Ltd. register/5508517383600709904. contained in this agenda may come 236. Zhaoqing China Square Industrial Ltd. SEDAR address: South Atlantic before this group for discussion, those 237. Zhaoqing China Square Industry Fishery Management Council, 4055 issues may not be the subject of formal Limited Faber Place Drive, Suite 201, North 238. Zhaoqing New Zhongya Aluminum action during this meeting. Action will Co., Ltd. Charleston, SC 29405; be restricted to those issues specifically 239. Zhejiang Anji Xinxiang Aluminum www.sedarweb.org. identified in this notice and any issues Co., Ltd. FOR FURTHER INFORMATION CONTACT: arising after publication of this notice 240. Zhejiang Lilies Industrial and Kathleen Howington, SEDAR that require emergency action under Commercial Co. Coordinator, 4055 Faber Place Drive, section 305(c) of the Magnuson-Stevens 241. Zhejiang Yili Automobile Air Suite 201, North Charleston, SC 29405; Fishery Conservation and Management Condition Co., Ltd. phone: (843) 571–4366; email: Act, provided the public has been 242. Zhejiang Yongkang Listar Aluminum notified of the intent to take final action Industry Co., Ltd. [email protected]. 243. Zhejiang Zhengte Group Co., Ltd. SUPPLEMENTARY INFORMATION: The Gulf to address the emergency. 244. Zhenjiang Xinlong Group Co., Ltd. of Mexico, South Atlantic, and Special Accommodations 245. Daya Hardware Co., Ltd. Caribbean Fishery Management 246. Zhongshan Gold Mountain Aluminum Councils, in conjunction with NOAA This meeting is accessible to people Factory Ltd. Fisheries and the Atlantic and Gulf with disabilities. Requests for auxiliary 247. Zhongya Shaped Aluminum (HK) aids should be directed to the SAFMC Holding Limited States Marine Fisheries Commissions, have implemented the Southeast Data, office (see ADDRESSES) at least 10 248. Runxingtai Electrical business days prior to the meeting. Equipment Co., Ltd. Assessment and Review (SEDAR) process, a multi-step method for Note: The times and sequence specified in [FR Doc. 2021–01370 Filed 1–21–21; 8:45 am] determining the status of fish stocks in this agenda are subject to change. BILLING CODE 3510–DS–P the Southeast Region. SEDAR is a three- step process including: (1) Data Authority: 16 U.S.C. 1801 et seq. DEPARTMENT OF COMMERCE Workshop; (2) Assessment Process Dated: January 15, 2021. utilizing webinars; and (3) Review Rey Israel Marquez, National Oceanic and Atmospheric Workshop. The product of the Data Acting Deputy Director, Office of Sustainable Administration Workshop is a data report which Fisheries, National Marine Fisheries Service. compiles and evaluates potential [FR Doc. 2021–01391 Filed 1–21–21; 8:45 am] [RTID 0648–XA825] datasets and recommends which BILLING CODE 3510–22–P Fisheries of the South Atlantic; datasets are appropriate for assessment Southeast Data, Assessment, and analyses. The product of the Assessment Review (SEDAR); Public Meeting Process is a stock assessment report DEPARTMENT OF COMMERCE which describes the fisheries, evaluates AGENCY: National Marine Fisheries the status of the stock, estimates National Oceanic and Atmospheric Service (NMFS), National Oceanic and biological benchmarks, projects future Administration Atmospheric Administration (NOAA), population conditions, and recommends Commerce. research and monitoring needs. The Agency Information Collection Activities; Submission to the Office of ACTION: Notice of SEDAR 66 Assessment assessment is independently peer Management and Budget (OMB) for Webinar III for South Atlantic Tilefish. reviewed at the Review Workshop. The product of the Review Workshop is a Review and Approval; Comment SUMMARY: The SEDAR 66 stock Summary documenting panel opinions Request; Fishery Capacity Reduction assessment of the South Atlantic stock regarding the strengths and weaknesses Program Buyback Requests of Tilefish will consist of a data scoping of the stock assessment and input data. AGENCY: National Oceanic & webinar, a workshop, and a series of Participants for SEDAR Workshops are assessment webinars. See Atmospheric Administration (NOAA), appointed by the Gulf of Mexico, South Commerce. SUPPLEMENTARY INFORMATION. Atlantic, and Caribbean Fishery DATES: The SEDAR 66 South Atlantic Management Councils and NOAA ACTION: Notice of Information Tilefish Assessment Webinar III will be Fisheries Southeast Regional Office, Collection, request for comment. held via webinar on February 18, 2021, Highly Migratory Species Management SUMMARY: The Department of from 12 p.m. until 3 p.m., EST. The Division, and Southeast Fisheries Commerce, in accordance with the established times may be adjusted as Science Center. Participants include: Paperwork Reduction Act of 1995 necessary to accommodate the timely Data collectors and database managers; (PRA), invites the general public and completion of discussion relevant to the stock assessment scientists, biologists, other Federal agencies to comment on assessment process. Such adjustments and researchers; constituency proposed, and continuing information may result in the meeting being representatives including fishermen, collections, which helps us assess the extended from or completed prior to the environmentalists, and non- impact of our information collection time established by this notice. governmental organizations (NGOs); requirements and minimize the public’s Additional SEDAR 66 webinar dates international experts; and staff of reporting burden. The purpose of this and times will publish in a subsequent Councils, Commissions, and state and notice is to allow for 60 days of public issue in the Federal Register. federal agencies. ADDRESSES: The items of discussion at the SEDAR comment preceding submission of the Meeting address: The SEDAR 66 66 South Atlantic Tilefish Assessment collection to OMB. South Atlantic Tilefish Assessment Webinar III are as follows: DATES: To ensure consideration, Webinar III will be held via webinar. • Finalize discussion on base model comments regarding this proposed The webinar is open to members of the configuration, sensitivity runs, and information collection must be received public. Registration is available online projections on or before March 23, 2021.

VerDate Sep<11>2014 19:27 Jan 21, 2021 Jkt 253001 PO 00000 Frm 00023 Fmt 4703 Sfmt 4703 E:\FR\FM\22JAN1.SGM 22JAN1 jbell on DSKJLSW7X2PROD with NOTICES