Dustbuddie Circular Saws Clean Up

Total Page：16

File Type：pdf, Size：1020Kb

Save Time for 7-1/4” Worm Drive & Money in DustBuddie Circular Saws Clean Up Without Dust Collection Model D4000 With Dust Collection Features: • Fits most worm drive & hypoid saws • Only universal shroud that captures dust at the front and rear of the blade “Feel” the cuts better with smooth wheels. • No tools required – two hook-and-loop straps for easy installation • Clear line of sight to blade for safer, more precise cutting Fits 7-1/4” Worm Drive/Hypoid Circular Saws • Protects workers from hazardous dust made by Dewalt®, Milwaukee®, Makita®, ® ® • “ Feel” your cuts better with smooth, non-marking wheels Skil , Bosch , Ridgid, and more. Dustless Technologies and this product is not affiliated, connected, or associated with, or sponsored, endorsed, or approved by any of DEWALT Power Tools and Accessories, Milwaukee Tool, Makita, Skil, RIDGID, Inc., or Robert Bosch GMBH. DustBuddie includes: DEWALT® is a registered trademark of DEWALT Power Tools and Accessories MILWAUKEE® is a registered trademark of MILWAUKEE TOOL. (1) dust shroud (1) spacer Makita® is a registered trademark of Makita. SKIL® and SKILSAW Power Tools is a registered trademark of Chervon Holdings Ltd. (1) primary front rubber dust shield (1) releasable zip tie BOSCH® is a registered trademark of © Robert Bosch Tool Corporation The RIDGID trademark and logo are registered trademarks of RIDGID, Inc. in the U.S. and other (1) optional rear rubber dust shield (1) soft swivel hose cuff countries. 800.568.3949 www.DustlessTools.com SF074_0217 New OSHA Silica Standard EPA RRP Lead Dust Avoid Costly Fines Dustless Technologies Government agencies can fine up to $37,500 per infraction for solutions comply with: failing to comply with hazardous dust control rules on construction sites. Dustless dust control solutions meet government guidelines. • EPA RRP rules for lead dust. Dustless systems meet the standard set forth in Table-1 of OSHA’s • NIOSH rules for silica dust. new silica standard making it easy to achieve a safe, clean, compliant workplace. • OSHA Silica Standard. • Dustless Technologies® true HEPA vacuums are certified to meet guidelines. • Each HEPA Wet+Dry filter is independently tested and certified. • The HEPA Wet+Dry vacuum is also certified air tight per guidelines. • HEPA Wet+Dry filters feature a serialized sticker for easy inspector verification. • Dustless shrouds and accessories capture dust at the point-of- origin, per guidelines. • Universal Dustless shrouds fit the majority of major tool brands. Ask About Our Other Great Dustless® Products! Wet+Dry ® BitBuddie® Dust & DustlessVac ® HEPA Backpack Dustless Slurry Shroud Drywall Sander HEPA Wet+Dry Dustie® Dust Shroud DustBuddie® Dust Shroud CutBuddie® Dust Shroud DustlessVac®.

Copy Link

Recommended publications

Hvilken Maskine Har Brug for Hvilket Slibeblad?
20 | Slibemidler | Oversigt Bosch-tilbehør Hvilken maskine har brug for hvilket slibeblad? Excenterslibere Type Ø mm Antal huller Type Ø mm Antal huller Type Ø mm Antal huller Bosch Felisatti Makita GEX 125A/AC 125 8 TP 521/(E)AS 150 6 BO 6040 150 8 GEX 125/150 AVE 125/150 8 TP 522/AS/CE 150 6 BO 5041K 125 8 GEX 150AC/ACE 150 6 RGF 150/600E 150 6 Metabo GEX 150 Turbo 150 6 Festo/Festool SXE 125 125 8 PEX 11A/AE 115 8 ES 125/E 125 8 SXE 425 125 8 PEX 12A/AE 125 8 ETS 125 EQ-Plus 125 17/9 SXE 425XL 150 6 PEX 15AE 150 6 ETS 125 EQ 125 17/9 SXE 450 DUO 150 6 PEX 115 115 8 ETS 125 Q-Plus 125 17/9 FSX 200 Intec 125 8 PEX 125A 125 8 ETS 125 Q 125 17/9 SXE 325 Intec 125 8 PEX 125AE 125 8 ES 150/3 EQ/-C 150 17/9 Milwaukee PEX 220A 125 8 ES 150/5 EQ/-C 150 17/9 PRS 125E 125 8 PEX 270A/AE 125 8 ET 2E 150 17/9 ROS 150E 150 6 PEX 300A/E 125 8 ETS 150/3 EQ 150 17/9 Peugeot PEX 400AE 125 8 RO 150 FEQ-Plus 150 17/9 PAE 115 115 8 PEX 420AE 150 6 RO 150 FEQ 150 17/9 PRX 150E 150 6 AEG ETS 150/3 EQ-C 150 17/9 Protool EX 400 125 8 ETS 150/3 EQ-Plus 150 17/9 ESP 150E 15 9 EX 450 125 8 ETS 150/5 EQ 150 17/9 Ryobi EX 450 (150) 150 16 ETS 150/5 EQ-C 150 17/9 ERO 2412VN 125 8 EXE 400 125 8 ETS 150/5 EQ-Plus 150 17/9 P410 125 8 EXE 450 150 8 RO 150E 150 17/9 RS 290 125 8 EXE 460 (125) 125 8 RO 150 E(-Plus) 150 17/9 Skil EXE 460 125/150 8 WTS 150/7E (-Plus) 150 17/9 7400 125 8 EXE 460 (150) 150 16 ET 2E/E-Plus 150 17/9 7402 125 8 ROS 150E 150 6 ES 125 (Plus) 125 8 7415 115 8 EX 150 E 150 6 Flex 7425 125 8 EX 125 ES 125 8 XS 712A 125 8 7430 125 8 Atlas Copco X/XS
[Show full text]
Timberline™ Blades Part No
GENE ALTERNATE TOP BEVE 12" 1" ARBOR 60 Teeth TOOL NO. 300-600 MAX 4800 R.P.M. This blade i o Timberline™ Blades Part No. Blade Dia. Page No. Machine types 120-300 4-3/8"/4-1/2" 5, 9 Circular Saws, Worm Drives, Trim Saws Jepson®, 8211 Makita®, 4100RH Makita®, 4200NH Panasonic®, EY3502FQMKW-12Volt Porter-Cable®, 314, 9314 135-300 5-3/8"/5-1/2" 5, 9 Circular Saws, Worm Drives, Trim Saws Black&Decker®, CS144-14.4Volt DeWalt®, DW930K-12Volt DeWalt®, DW935K-14Volt DeWalt®, DW936K/936-18Volt Grizzly®, G8598-18Volt Makita®, 5005BA Panasonic®, EY3503FQWKW-12Volt Panasonic®, EY3531FQWKW-15.6Volt Ryobi®, R10730K2-18Volt Skil®, HD5510 150-200 6" 5 Circular Saws, Worm Drives, Trim Saws 150-400 Porter Cable®, 345 SAW BOSS® Porter Cable®, 9845 SAW BOSS® -19.2Volt 165-240 6-1/2" 5, 9 Circular Saws, Worm Drives, Trim Saws 165-400 DeWalt®, DW007K-24Volt, DW939K-18Volt Hitachi®, C6DC-18Volt Makita®, 5620DWA-18Volt, 5621DWD-18Volt, 5026DWD-18Volt, 5630DWA-14.4Volt Milwaukee®, 6310-20-18Volt, 6310-22-18Volt Skil®, HD5825, HD5525, 5125 Talon®, TJ759000-18Volt 175-24, 175-40, 175-60 7-1/4" 4, 6, 7, 9 Circular Saws, Worm Drives, Cordless Saws 185-180, 185-240,185-36 11, 13 Black&Decker®, 2683, 2684, 2694, 2700, 2701 185-140, 185-505, 190-240 Bosch®, 1655, 1657, 1658, 1655K, 1658K DeWalt®, DW359/359K, DW362/362K, DW369CSK, DW364, DW378G, DW368K 72524, 72540 Grizzly®, G9906 Hitachi®, C7BD, C7S Jepson®, 8207, 8218 Makita®, 5007NB/K, 5037NB/K/A, 5057KB, 5007NHK/NLK, 5007FK/FAK, 5740NB, 5177B, 5277B BLS712SFK-24Volt, BSS730SHK-24Volt, LS0711Z Milwaukee®, 6368, 6365-6,
[Show full text]
Stanley Black and Decker Techtronic Industries Co Ltd (TTI) Chevron
Who Owns What? Andrew Davis May, 2019 This is a redacted version of an article II found on protoolreviews.com. I remember growing up when General Motors offered different brands at different price points (until they all the brands started to overlap before GM collapsed) – Cadillac at the top end, followed by Oldsmobile, Buick, Pontiac, and Chevy. We have a similar situation in woodworking tools (also in kitchen appliances) except that in the case of tools, the multi-brand company is more often a case of acquisitions rather than organic development. Anyway, for those readers interested in the business side of tools, this column, which is a departure from my usual thread, may be of interest. Stanley Black and Decker Stanley Black & Decker (SBD) turned heads when it bought Craftsman Tools in 2017 after Sears closed 235 stores in 2015. Dating back to 1843 with a man named Frederick Stanley, the company merged in 2010 with Black and Decker. As of 2017, the company maintains a $7.5 billion business in tools & storage alone. SBD brands include: DeWalt Stanley Black + Decker Bostitch Craftsman Vidmar Mac Tools Irwin Lenox Proto Porter-Cable Powers Fasteners Lista Sidchrome Emglo USAG Techtronic Industries Co Ltd (TTI) TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID and RYOBI names for cordless power tools (Emerson actually owns RIDGID and makes the red tools). Founded in 1985 in Hong Kong, TTI sells tools all over the world and employs over 22,000 people. TTI had worldwide annual sales of over US$6 billion in 2017.
[Show full text]
Milwaukee Electric Tool Corporation Product Catalog 2005-2006
Catalog Cover05_001_188 #2 6/10/05 5:10 PM Page 1 Product Catalog 2005-2006 Corporation Milwaukee Electric Tool MILWAUKEE ELECTRIC TOOL CORPORATION 13135 West Lisbon Road • Brookfield, WI 53005-2550 • Phone: 262-781-3600 • Fax: 262-783-8555 • CUSTOMER SERVICE: Phone: 800-SAWDUST • Fax: 800-638-9582 CANADA: 755 Progress Avenue • Scarborough, Ontario M1H 2W7 • Phone: 416-439-4181 • Fax: 416-439-6210 MEXICO: Blvd. Abraham Lincoln, #13 • Colonia Los Reyes, Zona Industrial • Tlalnepantla, C.P. 54073 • Edo. de Mexico • Telefono (55) 5565-1414 • Fax (55) 5565-0925 www.milwaukeetool.com CAT2005-06/6-05/350M/VH/Printed in U.S.A. MILWAUKEE ELECTRIC TOOL CORPORATION Catalog Cover05_002_187 6/8/05 5:12 PM Page 1 V28 Li-ion RUN TIME DIFFERENCE COMPARE THE TECHNOLOGY. INTRODUCING V28Power.com POWERFUL TOOLS CHOOSE FROM SIX REVOLUTIONARY REVOLUTIONARY 18V NiCd BATTERY FUEL GAUGE BATTERY VOLTS THE NEXT CORDLESS LITHIUM-ION 28 VOLT BAND SAW HAMMER-DRILL CIRCULAR SAW Finally, a cordless band saw that’s The V28 hammer-drill provides awesome Cut faster, longer and with as fast and powerful as Milwaukee’s power with its 28 volt motor giving you more power than any 24 volt corded. V28 gives you 4-3/4” x 600 in.-lbs. of max. torque and up to saw on the market. Get up to 4-3/4” deep-cutting capacity for 27,000 BPM. It drills up to twice the twice the run time of an 18 volt high speed cutting where and when number of holes as an 18 volt. with no extra battery weight.
[Show full text]
Client Alert
NOVEMBER 2015 CLIENT ALERT WOODWORKING AND POWER TOOL PRODUCT LIABILITY CASE LAW UPDATE by JAMES DARTLIN (DART) MEADOWS Balch & Bingham LLP is in the forefront in the defense of woodworking machinery and power tool manufacturers, distributors, and dealers in products liability litigation throughout the United States. Products have included shapers, fixed and sliding table saws, gang rip saws, moulders, panel saws (including stationary and sliding as well as vertical and horizontal panel saws), jig and band saws, double end tennenors, jointers, drilling and boring machines, sanders, miter saws, hand-held circular saws, pneumatic nailers, and a wide variety of computer numerically controlled machines. In addition, the firm has represented tooling manufacturers and other companies that supply component parts, equipment, and accessories to the woodworking industry. Attorneys in this practice group have worked closely with the leading experts in the industry, have had extensive dealings with the applicable ANSI and OSHA standards, and have successfully defended both domestic and foreign companies in cases in over 35 states. In addition to woodworking machinery and power tools, other products liability cases handled by this practice group in recent years include child restraint systems and juvenile products, construction equipment, motor vehicles, sawmill and other industrial equipment, chemical products, firearm design, airline parts and products, motorcycle helmets, and gas tanks. SELECT JURY VERDICTS Thull v. Techtronic Industries Co. Ltd., No. 0:11-cv-02368 (D. Minn.) On October 23, 2014, a Minnesota federal jury found the design of the RIDGID 10-inch table saw was not the cause of a woodworker’s injury. Thull had sought $6.4 million in damages for injuries to his forearm he sustained while using the saw.
[Show full text]
Cordless Driver Drill
Cordless Driver Drill MODEL 6260D MODEL 6270D MODEL 6280D 005216 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model 6260D 6270D 6280D Steel 10 mm (3/8”) Wood 21 mm (13/16”) 25 mm (1”) 25 mm (1”) Capacities 5.1 x 38 mm Wood screw 5.1 x 63 mm (3/16” x 2-1/2”) (3/16” x 1-1/2”) Machine screw 6 mm (1/4”) No load speed High 0 - 1,200/min. (RPM) Low 0 - 350/min. Overall length 192 mm (7-9/16”) Net weight 1.4 kg ( 3.1 lbs) 1.5 kg (3.3 lbs) 1.6 kg (3.5 lbs) Rated voltage D.C.9.6V D.C.12V D.C.14.4V Standard battery cartridges PA09 PA12 PA14 • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 2. Do not operate power tools in explosive atmospheres, such as in the presence of 1. Keep your work area clean and well lit. flammable liquids, gases, or dust. Power Cluttered benches and dark areas invite acci- tools create sparks which may ignite the dust dents. or fumes. 2 3. Keep bystanders, children, and visitors shoes, hard hat, or hearing protection must away while operating a power tool.
[Show full text]
U.S. Consumer Product Safety Commission Batteriesplus Recalls
U.S. Consumer Product Safety Commission Office of Communications Washington, D.C. FOR IMMEDIATE RELEASE Firm's Recall Hotline: (877) 856-3232 December 21, 2011 CPSC Recall Hotline: (800) 638-2772 Release #12-063 CPSC Media Contact: (301) 504-7908 BatteriesPlus Recalls Replacement Battery Packs Used with Cordless Tools Due to Explosion Hazard WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product. Name of Product: Rayovac NI-CD Cordless Tool Battery Packs Units: About 111,800 Importer: BatteriesPlus LLC, of Hartland, Wis. Hazard: The replacement battery pack can explode unexpectedly, posing a risk of serious injury to consumers. Incidents/Injuries: BatteriesPlus has received five reports of exploding batteries. No injuries have been reported. Description: This recall involves RAYOVAC-branded replacement battery packs used with cordless power tools. “RAYOVAC,” “NI-CD” and a part number beginning with “CTL” are printed in white lettering on the product. The battery packs were sold in voltages ranging between 2.4 and 18 volts in various sizes and shapes. They were sold as replacement batteries to the following brand tools: Black and Decker, Bosch, DeWalt, Makita, Milwaukee, Panasonic, Ryobi and Skil. Sold exclusively at: BatteriesPlus retail stores nationwide and online at www.batteriesplus.com between June 2008 and October 2011 for about $60. Manufactured in: China Remedy: Consumers should immediately stop using and remove the battery packs from cordless tools.
[Show full text]
SATS Replacement Catalog
HOW TO ORDER KipperTool® is dedicated to getting you the tools you need with several ordering options How to order directly from KipperTool®: 2375 Murphy Blvd., Gainesville, GA 30504 Sales: 1-800-295-9595 Fax: 1-800-295-9596 [email protected] www.kippertool.com SUPPORTING Simplifed Ordering Procedures For Federal Buyers: GSA SCHEDULE CONTRACT NUMBER GS-06F-0018L DOD EMALL CONTRACT SPM7W1-10-D-E008 (A Blanket Purchase Agreement (BPA) Against Our GSA Contract GS-06F-0018L) Order directly from GSA For help, contact GSA Global Orders can be placed through Advantage! or DOD Emall using Supply at 1-800-525-8027. FEDSTRIP or MILSTRIP the NSN, or the Part Number. DSN 465-7315 SATS REPLACEMENT CONTRACT NUMBER GS-06F-DA197 KipperTool® Company’s Strategic Distributors Divine Imaging, Inc. [email protected] | KIPPERTOOL.COM KIPPERTOOL® SUPPLIERS LIST ABRASIVES, BRUSHES & BROOMS DML APEX TOOL GROUP: 3M ESAB NICHOLSON ANDERSON GALAXY GROBET ARC ABRASIVES IRWIN INDUSTRIAL SIMONDS CAMEL GRINDING WHEELS LENOX SAW WARRENSVILLE FILE & KNIFE DIAMOND PRODUCTS MAGNA HAND TOOLS FALCON ABRASIVES MONSTER CARBIDE ALLEN KEIFER BRUSHES MORSE CUTTING TOOLS APEX TOOL GROUP: MERIT ABRASIVES OLDHAM APEX NORTON ABRASIVES PRECISION TWIST DRILL CRESCENT ADHESIVES, CHEMICALS, PRIMARK COOPER TOOLS SEALANTS, PAINT & LUBRICANTS QUALITY CARBIDE H.K. PORTER 3M ROCKY MOUNTAIN TWIST DRILL LUFKIN ACCU-FORM POLYMERS OF WARSAW LTD SIMONDS NICHOLSON ALBION DISPENSING SOLUTIONS STARRETT PLUMB GLIDDEN SUPER TOOL UTICA GROVER TITAN, USA WELLER J & S CHEMICAL DIGITAL TRACKING (RFID) WISS KRYLON IDZ XCELITE PLEWS / EDLEMANN LUBRICATION EQUIPMENT OMNI-ID ARMSTRONG AIR TOOLS & ACCESSORIES WINWARE/CRIBMASTER BAHCO AJAX DISTRIBUTORS BARCO ATP / THOR ARMYPROPERTY.COM BLACKHAWK CLECO DIVINE IMAGING C.S.
[Show full text]
IQV Cordless Tool Technology
Cordless Range-ENGLISH ok 9/02/07 14:07 Page 2 More than just cordless, IQV™ Series IQV cordless tool cordless Cordless Tools technology Power From the same engineers who produce the most reliable industrial tools comes a new line of cordless With more than 100 years of power tool design behind the Ingersoll Rand is committed to delivering the most advanced cordless tool technologies. tools specifically designed for the service and product industries. Ingersoll Rand IQV Series cordless tools, you can rest assured Over the past 100 years, we’ve established a legacy of improving productivity for service The IQV Series delivers unmatched power, durability, and commitment to improve productivity for that their performance is the best you can get. Designed to professionals with the world’s most powerful and durable air tools. We’ve partnered with global professional users. provide more power with less weight, IQV Series cordless tools leaders in electronics and battery technologies to deliver cordless tools with intelligent features provide up to twice the power-to-weight of the leading for enhanced performance and durability. competitors. Durability Smart voltage One charger for all IQV batteries. Revolutionary battery and electronics technology designed and patented through partnerships with leading global battery All tools work with lithium-ion and nickel-cadmium batteries. manufacturers means that IQV batteries will work harder and Increased power with smaller batteries for best-in-class power-to-weight last up to 3 times longer than competitive batteries. ratios. Ingersoll Rand DeWalt Milwaukee Bosch Makita Snap-On Hilti Enhanced battery durability Metal-reinforced Brute Commitment composite YES No No only No No No housings The Ingersoll Rand IQV Warranty ensures you get the coverage Optimized charging for extended power and longevity up to 3 times you want, without the hassles you expect.
[Show full text]
On Rehearing Published United States Court Of
ON REHEARING PUBLISHED UNITED STATES COURT OF APPEALS FOR THE FOURTH CIRCUIT No. 14-1746 SD3, LLC; SAWSTOP LLC, Plaintiffs – Appellants, v. BLACK & DECKER (U.S.) INC.; BLACK & DECKER CORPORATION; CHANG TYPE INDUSTRIAL CO., LTD.; DELTA POWER EQUIPMENT CORP.; HITACHI KOKI CO., LTD.; HITACHI KOKI USA LTD.; MAKITA CORPORATION; MAKITA U.S.A., INC.; MILWAUKEE ELECTRIC TOOL CORP.; ONE WORLD TECHNOLOGIES, INC.; OWT INDUSTRIES, INC.; ROBERT BOSCH GMBH; ROBERT BOSCH TOOL CORPORATION; RYOBI TECHNOLOGIES, INC.; STANLEY BLACK & DECKER, INC.; TECHTRONIC INDUSTRIES, CO., LTD.; TECHTRONIC INDUSTRIES NORTH AMERICA, INC.; PENTAIR WATER GROUP, INC.; EMERSON ELECTRIC COMPANY; PENTAIR, INC., Defendants – Appellees, and DEWALT INDUSTRIAL TOOLS; EMERSON ELECTRIC COMPANY, INC.; PENTAIR CORPORATION; PORTER-CABLE CORPORATION; SKIL POWER TOOLS, Defendants. ---------------------------- AMERICAN ANTITRUST INSTITUTE; NATIONAL CONSUMERS LEAGUE, Amici Supporting Appellants. Appeal from the United States District Court for the Eastern District of Virginia, at Alexandria. Claude M. Hilton, Senior District Judge. (1:14−cv−00191−CMH−IDD) Argued: May 12, 2015 Decided: October 29, 2015 Before WILKINSON, AGEE, and WYNN, Circuit Judges. Affirmed in part, vacated in part, and remanded by published opinion. Judge Agee wrote the opinion, in which Judge Wynn joined. Judge Wynn wrote a separate concurring opinion. Judge Wilkinson wrote an opinion concurring in part and dissenting in part. ARGUED: Joel Davidow, CUNEO GILBERT & LADUCA, LLP, Washington, D.C., for Appellants. James Scott Ballenger, LATHAM & WATKINS, LLP, Washington, D.C., for Appellees. ON BRIEF: Jonathan W. Cuneo, Matthew E. Miller, CUNEO GILBERT & LADUCA, LLP, Washington, D.C., for Appellants. John D. Harkrider, Richard B. Dagen, AXINN, VELTROP & HARKRIDER LLP, Washington, D.C., Bernard J.
[Show full text]
Attaching the Leigh E-Bush to the Router
69 D4R Pro - Appendix I Attaching the Leigh e-Bush to the Router The correct guidebush is the vital link between the router and your Leigh Jig. It precisely steers the router. Where possible, always use the Leigh system to ensure correct bush length and precise diameter for accurate results. Leigh offers the adaptors below to fit guidebushes to over one hundred router models new and old, including Porter Cable, Black & Decker, and DeWalt. Many other makes like Bosch, Fein, Festool, Milwaukee etc., include or offer base adaptors. See a list of routers in the Guide Bushing and Adaptor Selection Chart on the next page. Leigh Guide Bushing and Adaptor System e7 711C e10 716C eBush Mounting Variations 721 RA1126 RA1129 Set of two Bosch Adaptors: RA1126 and RA1100 704R RA1100 eBush with eBushes fit many Adaptors 702 & 702R routers directly 702 705R 702R 706R 703 710 eBush with eBush with Adaptor 703 Adaptor 710 Nut for e-Bushes and C Guide Bushings 70 Appendix I D4R Pro User Guide ATTACHING THE LEIGH E-BUSH TO THE ROUTER Guide Bushing and Adaptor Selection Leigh dovetail jigs require a router fitted with a guide bushing. An adaptor may be required to fit the bushing to the router. Visit Leightools.com for a complete list of routers. 1 ROUTER 2 ROUTER 3 ROUTER 4 7/16" OD 5 5/8" OD DIRECTIONS MAKER MODEL ADAPTOR BUSHING ◆ BUSHING ▲ OFE 710 in plunge base Not Required e7 or 711C 716C A. Locate name of router maker in AEG OFSE 2000 703 e7 or 711C 716C Column 1.
[Show full text]
Aftermarket Catalog 2018
EXTERNAL BATTERY PACKS BATTERY CELLS - YIK LIK ENERGY EXTERNAL BATTERY TRAVEL SERIES Model EL1697 Max. 27000 mAh IATA inight in board (Non DG) Specications Model EL1697 Input DC 12V-24V Model: INR18650A260 Model: INR18650D260 16V 4A / Chemistry: Li-NMC Chemistry: Li-NMC 1 19V 3.5A / Nominal Voltage: 3.6V Nominal Voltage: 3.6V 24V 2.5A Output Typical Capacity: 2600 mAh Typical Capacity: 2600 mAh 2 5V 1A Continuous Current: 6A Continuous Current: 10A 3 5V 2.1A 4 10.8V 5A Size 177 x 110 x 23 mm Capacity 27000 mAh 4 Colors : Pink, Green, Blue & Gray Panasonic Cell NCR18650A x 9 Package Includes Model: INR18650D290 Model: ICR18650A300 Chemistry: Li-NMC Chemistry: Li-NMC Connectors for Laptop Connectors for Mobile Phone AC Adapter (19V / 45W) Travel Bag Nominal Voltage: 3.6V Nominal Voltage: 3.6V Typical Capacity: 2900 mAh Typical Capacity: 3000 mAh Continuous Current: 10A Continuous Current: 6A EXTERNAL BATTERY PROFESSIONAL SERIES Model EL1901 Max. 63000 mAh Specications Model EL1901 Rated Input DC 12-19V Selectable Output DC 16V or 19V 4.75A Max. USB Output DC 5V / 2A Size 270 x 145 x 33 mm Designed for Model: INR18650D300E Model: INR18650A340 Laptop Computers Capacity 63000 mAh Cell Panasonic NCR18650GA x 18 Chemistry: Li-NMC Chemistry: Li-NMC Nominal Voltage: 3.6V Nominal Voltage: 3.6V Typical Capacity: 3000 mAh Typical Capacity: 3400 mAh Continuous Current: 15A Continuous Current: 6A E-BIKE BATTERY PACKS * Our e-bike battery packs are in compliance with EN15194 * ULV0 standard materials are used for our battery packs WATER BOTTLE BATTERY
[Show full text]