Terminal Emulation User's Guide Trademarks

Total Page:16

File Type:pdf, Size:1020Kb

Terminal Emulation User's Guide Trademarks Terminal Emulation User's Guide Trademarks ADDS Viewpoint A2 is a trademark of Applied Digital Data Systems Inc. AIX is a registered trademark of International Business Machines Corporation. DEC, VT52, VT100, VT131, VT220, VT300, VT320, VT340, VT400 and VT420 are registered trademarks of Digital Equipment Corporation. Hazeltine is a trademark of Esprit Systems, Inc. HP700/92, HP2392A and HP2622A are trademarks of Hewlett Packard Company. IBM is a registered trademark of International Business Machines Corporation. Microsoft is a registered trademark of Microsoft Corporation. Tandem, NonStop and LXN are trademarks of Tandem Computers Inc. TeleVideo is a registered trademark, and TeleVideo 910, 910+ and 925 are trademarks of TeleVideo Systems, Inc. WYSE is a registered trademark, and WY-50, WY-50+ and WY-60 are trademarks of Wyse Technology Inc. All other product names are trademarks of their respective manufacturers. Copyright © 2003 by Pericom Software PLC. All rights reserved. Before reproduction of this material in part or in whole, obtain written consent from Pericom Software PLC. Pericom Software PLC, The Stables, Cosgrove, Milton Keynes, MK19 7JJ, UK Tel: +44 (0) 1908 267111 Fax: +44 (0) 1908 267112 Contents Contents Introduction ....................................................... 1-1 About This User's Guide ............................................................... 1-1 Terms & Conventions .................................................................... 1-2 Getting Started.................................................. 2-1 WBT Session Configuration .......................................................... 2-1 Using The Connection Wizard .......................................................... 2-1 Terminal Emulation Configuration................................................... 2-6 Emulation Options ...................................................................... 2-6 DEC Suite Options ..................................................................... 2-7 HP 700-92/96 Option .................................................................. 2-8 IBM 3151 Option ........................................................................ 2-8 IBM 3270 Options ...................................................................... 2-8 IBM 5250 Options ...................................................................... 2-9 TCP/IP Connection Settings ........................................................... 2-10 TN3270 Options ....................................................................... 2-12 TN5250 Options ....................................................................... 2-14 5250 Printer Options ................................................................. 2-16 Modem Connection Settings ........................................................... 2-19 Serial Connection Settings .............................................................. 2-20 Automate Login Process ................................................................. 2-22 Printer Port Settings......................................................................... 2-24 GUI Overrides ................................................................................. 2-26 Aux Port Settings ............................................................................. 2-27 The Command Bar ...................................................................... 2-28 Setup Menus .................................................................................... 2-28 The Button Tools ............................................................................. 2-29 SBC Data Capture .................................................................... 2-30 The Soft Buttons .............................................................................. 2-30 Contents-1 Contents The Status Bar ............................................................................. 2-31 Hotspots ....................................................................................... 2-32 Keyboard Configuration ................................... 3-1 Keyboard Mapping ........................................................................ 3-1 Defining Key Functions ................................................................. 3-1 Defining A Key Or Key Combination .............................................. 3-2 Entering Control Characters.............................................................. 3-3 Key Combinations & Sequences....................................................... 3-3 Compose Character Sequences ..................................................... 3-4 Mouse Functions .............................................. 4-1 Introduction ................................................................................... 4-1 Redefining Mouse Functions ......................................................... 4-1 Selecting & Copying Text.............................................................. 4-2 Moving The Cursor In Block Mode ............................................... 4-2 Send Keyword ................................................................................ 4-3 Show & Action Hotspots ............................................................... 4-3 Emulating Middle Mouse Button .................................................. 4-3 Setup Menus ..................................................... 5-1 Displaying & Closing Menus ........................................................ 5-1 Using The Menus ........................................................................... 5-2 Dialog Boxes ................................................................................. 5-3 Default Settings ............................................................................. 5-4 Specifying Characters In Setup Entries ........................................ 5-4 Creating A Connection Template .................................................. 5-5 Selecting A Connection Template .................................................... 5-6 Menu Descriptions ........................................................................ 5-7 File Menu ........................................................................................... 5-7 Edit Menu ........................................................................................ 5-16 Settings Menu .................................................................................. 5-17 Emulation Settings .......................................................................... 5-19 HP 700-92/96 Settings..................................................................... 5-22 IBM 3151 Settings ........................................................................... 5-28 Wyse Settings .................................................................................. 5-32 Contents-2 Contents TA6530 Settings .............................................................................. 5-37 IBM 3270 Settings ........................................................................... 5-39 Notice Board Setup ......................................................................... 5-43 IBM 5250 Settings ........................................................................... 5-45 Serial Settings .................................................................................. 5-49 Auxport Setup .................................................................................. 5-51 Terminal Settings ............................................................................ 5-52 Tab Stops ......................................................................................... 5-58 Local Editing ................................................................................... 5-59 Block Transmission ......................................................................... 5-61 Attributes ......................................................................................... 5-65 Define Keyboard Macros ................................................................ 5-70 Defining A Key Or Key Combination ..................................... 5-71 Specifying Characters ............................................................... 5-72 Soft Buttons ..................................................................................... 5-73 Programming A Soft Button ..................................................... 5-73 Specifying Characters ............................................................... 5-74 Mouse Button Actions ..................................................................... 5-76 DEC VT Emulations .......................................... 6-1 Session Configuration ................................................................... 6-1 WBT Mode ........................................................................................ 6-1 Non-WBT Mode ................................................................................ 6-2 The Status Bar ............................................................................... 6-4 Horizontal Scrolling ...................................................................... 6-5 Keyboard Mapping ........................................................................ 6-5 DG 410/412 Emulation ...................................... 7-1 Session Configuration ................................................................... 7-1 WBT Mode ........................................................................................ 7-1 Non-WBT Mode ...............................................................................
Recommended publications
  • Freestyle-Pro-Manual.Pdf
    User Manual KB900 Mac/Windows/PC SmartSet™ Cherry Low-Force Switchable Programming Engine Mechanical Keyswitches 1 Kinesis Corporation 22030 20th Avenue SE, Suite 102 Bothell, Washington 98021 USA Keyboard models covered by this manual: [email protected], [email protected] KB900-brn www.kinesis.com April 20, 2018 Edition This manual covers features included through firmware version 1.0.0. To download the latest firmware and to access all support resources visit www.kinesis.com/support. To shop for accessories visit https://www.kinesis-ergo.com/products/: Palm Supports (AC903)- Detachable Palm Supports. VIP3 Pro (AC920)- Adjustable tenting accessory and Palm Supports (5°/10°/15°). Palm Supports required for tenting. V3 Pro (AC930)- Adjustable tenting accessory (5°/10°/15°) for use without Palm Supports. Palm Pads (AC700blk)- Cushioned palm pads for use with Palm Supports. © 2018 by Kinesis Corporation, all rights reserved. Kinesis and Freestyle are registered trademarks of Kinesis Corporation. Freestyle Pro, SmartSet, and v-Drive are trademarks of Kinesis Corporation. All other trademarks are property of their respective owners. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any commercial purpose, without the express written permission of Kinesis Corporation. FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
    [Show full text]
  • Desktop Screen Readers Keyboard Commands for Forms
    Quick Reference Guide: Desktop Screen Readers Keyboard Commands for Forms Screen Reader Keyboard Commands in Common for Forms Task Command Navigate through focusable items Tab (or Shift + Tab to go backward) Activate a button Enter or Space Bar Select a checkbox Tab to the checkbox, then press Space Bar Tab to the group of radio buttons, use the Arrow Keys to Select a radio button choose one of them, then press Space Bar Select an item in a <select> drop- Tab to the <select> field, press Alt/Option + Down Arrow to down list open the list, use Down/Up Arrow to select item, then press Enter Screen Reader Keyboard Commands for Forms Task JAWS NVDA Narrator VoiceOver Forms Mode: (On) (Automatic To Browse/Focus Mode or Scan Mode: Caps Lock + Space Toggle modes when in form element), (Off) Forms Mode: Insert + Space Not Available Bar Numpad Plus Bar Navigate to a form In Document Mode, press F In Document Mode, press F In Scan Mode, press F VO + Command + J Navigate to next form VO + Command + J (or Shift + VO F (or Shift + F to go backward) F (or Shift + F to go backward) F (or Shift + F to go backward) element + Command + J to go backward) Caps Lock + [F5 or F6], then Tab VO + U, then Left/Right Arrow List all form elements Insert + F5 Insert + F7, then Alt + F (twice) to the Scoping drop- until reaching Form Controls list down list and select Form Fields • Insert is the default NVDA modifier key, but Caps Lock can be set as a Recommended browsers: duplicate modifier key (so that it can be used in place of Insert).
    [Show full text]
  • Teemtalk® 5.0 for Windows CE & Xpe User's Guide
    TeemTalk® 5.0 for Windows CE & XPe User's Guide USA Neoware, Inc. 3200 Horizon Drive King of Prussia, PA 19406 Tel: +1-610-277-8300 Fax: +1-610-771-4200 Email: [email protected] UK Neoware UK Ltd The Stables, Cosgrove Milton Keynes MK19 7JJ Tel: +44 (0) 1908 267111 Fax: +44 (0) 1908 267112 Email: [email protected] TeemTalk Software Support Telephone: +1-610-277-8300 Web: http://www.neoware.com/support/ Software Version 5.0.1 October 2004 Neoware UK Ltd, The Stables, Cosgrove, Milton Keynes, MK19 7JJ Tel: +44 (0) 1908 267111 Fax: +44 (0) 1908 267112 TeemTalk © 1988-2004 Neoware UK Ltd, All Rights Reserved. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/) This product includes cryptographic software written by Eric Young ([email protected]) The material in this manual is for information purposes only and is subject to change without notice. Neoware UK Ltd accepts no responsibility for any errors contained herein. Trademarks TeemTalk is a registered trademark of Neoware UK Ltd. ADDS Viewpoint A2 is a trademark of Applied Digital Data Systems Inc. AIX is a registered trademark of International Business Machines Corporation. D100, D200 and D410 are trademarks of Data General. Dataspeed is a registered trademark of AT&T. DEC, VT52, VT100, VT131, VT220, VT300, VT320 and VT340 are registered trademarks of Digital Equipment Corporation. Hazeltine is a trademark of Esprit Systems, Inc. HP700/92, HP700/94, HP700/96, HP2392A and HP2622A are trademarks of Hewlett Packard Company. IBM is a registered trademark of International Business Machines Corporation.
    [Show full text]
  • INTERSKILL MAINFRAME QUARTERLY December 2011
    INTERSKILL MAINFRAME QUARTERLY December 2011 Retaining Data Center Skills Inside This Issue and Knowledge Retaining Data Center Skills and Knowledge 1 Interskill Releases - December 2011 2 By Greg Hamlyn Vendor Briefs 3 This the final chapter of this four part series that briefly Taking Care of Storage 4 explains the data center skills crisis and the pros and cons of Learning Spotlight – Managing Projects 5 implementing a coaching or mentoring program. In this installment we will look at some of the steps to Tech-Head Knowledge Test – Utilizing ISPF 5 implementing a program such as this into your data center. OPINION: The Case for a Fresh Technical If you missed these earlier installments, click the links Opinion 6 below. TECHNICAL: Lost in Translation Part 1 - EBCDIC Code Pages 7 Part 1 – The Data Center Skills Crisis MAINFRAME – Weird and Unusual! 10 Part 2 – How Can I Prevent Skills Loss in My Data Center? Part 3 – Barriers to Implementing a Coaching or Mentoring Program should consider is the GROW model - Determine whether an external consultant should be Part Four – Implementing a Successful Coaching used (include pros and cons) - Create a basic timeline of the project or Mentoring Program - Identify how you will measure the effectiveness of the project The success of any project comes down to its planning. If - Provide some basic steps describing the coaching you already believe that your data center can benefit from and mentoring activities skills and knowledge transfer and that coaching and - Next phase if the pilot program is deemed successful mentoring will assist with this, then outlining a solid (i.e.
    [Show full text]
  • Operator's Guide for IBM 3270 Information Display Systems
    GA27-2742-1 Operator's Guide for IBM 3270 Information Systems Display Systems i i Second Edition (July, 1972) This is a major revision of GA27-2742-0 and incorporates Technical Newsletter GN31-3001. Operating instructions for the printer and operator identification card reader have been added. Comments and corrections have been incorporated throughout the manual. Any system changes affecting this publication will be reported in subsequent revisions or Technical Newsletters. Additional copies of this manual can be obtained through IBM branch offices. Text for this publication has been prepared with the IBM SE LECTR IC ® Composer. A form is provided at the back of this publication for reader's comments. If the form has been removed, comments may be addressed to: IBM Systems Development Division, Product Publications, Dept. 520, Neighborhood Road, Kingston, N.V., 12401 © Copyright International Business Machines Corporation, 1971, 1972 Contents iii Table of Contents First Words to the Operator Qu ick Reference . 3 Operating the 3270* . 4 Introduction to Display Station Operation 5 Operator Controls 7,8 The Display Image 8 Indicators . 15-19 Keyboards 20 Typewriter Keyboard* ............... 24 I Data Entry Keyboard* ............... 44 I Operator Console Keyboard* . 62 I ·" Printer Operation * . 76 I,.~' , Operator Identification Card Reader . 88 I A Typical Job . · 90 Correcting Operator Errors . 90 Trouble with Your Machine · 92 Operator Trouble Report 92 Extras for the 3270* . .100 Selector Pen . · 101 Secu rity Key Lock .105 Audible Alarm . .106 Numeric Lock Feature .109 Understanding the 3270* .. 110 Data Processing · 111 Display Stations .. · 114 The IBM 3270 Information Display System · 115 ) Index · 119 *The complete table of contents for each section is on the first page of that section.
    [Show full text]
  • Introduction to Mainframe Networking TCP/IP Problem Determination
    z/OS Basic Skills Information Center Networking on z/OS z/OS Basic Skills Information Center Networking on z/OS Note Before using this information and the product it supports, read the information in “Notices” on page 251. This edition applies to z/OS (product number 5694-A01). We appreciate your comments about this publication. Comment on specific errors or omissions, accuracy, organization, subject matter, or completeness of this book. The comments you send should pertain to only the information in this manual or product and the way in which the information is presented. For technical questions and information about products and prices, please contact your IBM branch office, your IBM business partner, or your authorized remarketer. When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. IBM or any other organizations will only use the personal information that you supply to contact you about the issues that you state on this form. Send your comments through this web site: http://publib.boulder.ibm.com/infocenter/zoslnctr/v1r7/index.jsp?topic=/com.ibm.zcontact.doc/webqs.html © Copyright IBM Corporation 2006, 2010. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Contents Before you begin the topic about Coupling channels ...........40 networking on z/OS .........vii Open Systems Adapter (OSA) .......40 HiperSockets ..............46 The I/O cage ..............48 Part 1. Introduction to networking on the mainframe...........1 Chapter 4. Sample network configuration ............49 Chapter 1.
    [Show full text]
  • ISO Basic Latin Alphabet
    ISO basic Latin alphabet The ISO basic Latin alphabet is a Latin-script alphabet and consists of two sets of 26 letters, codified in[1] various national and international standards and used widely in international communication. The two sets contain the following 26 letters each:[1][2] ISO basic Latin alphabet Uppercase Latin A B C D E F G H I J K L M N O P Q R S T U V W X Y Z alphabet Lowercase Latin a b c d e f g h i j k l m n o p q r s t u v w x y z alphabet Contents History Terminology Name for Unicode block that contains all letters Names for the two subsets Names for the letters Timeline for encoding standards Timeline for widely used computer codes supporting the alphabet Representation Usage Alphabets containing the same set of letters Column numbering See also References History By the 1960s it became apparent to thecomputer and telecommunications industries in the First World that a non-proprietary method of encoding characters was needed. The International Organization for Standardization (ISO) encapsulated the Latin script in their (ISO/IEC 646) 7-bit character-encoding standard. To achieve widespread acceptance, this encapsulation was based on popular usage. The standard was based on the already published American Standard Code for Information Interchange, better known as ASCII, which included in the character set the 26 × 2 letters of the English alphabet. Later standards issued by the ISO, for example ISO/IEC 8859 (8-bit character encoding) and ISO/IEC 10646 (Unicode Latin), have continued to define the 26 × 2 letters of the English alphabet as the basic Latin script with extensions to handle other letters in other languages.[1] Terminology Name for Unicode block that contains all letters The Unicode block that contains the alphabet is called "C0 Controls and Basic Latin".
    [Show full text]
  • Cygwin User's Guide
    Cygwin User’s Guide Cygwin User’s Guide ii Copyright © Cygwin authors Permission is granted to make and distribute verbatim copies of this documentation provided the copyright notice and this per- mission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this documentation under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this documentation into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. Cygwin User’s Guide iii Contents 1 Cygwin Overview 1 1.1 What is it? . .1 1.2 Quick Start Guide for those more experienced with Windows . .1 1.3 Quick Start Guide for those more experienced with UNIX . .1 1.4 Are the Cygwin tools free software? . .2 1.5 A brief history of the Cygwin project . .2 1.6 Highlights of Cygwin Functionality . .3 1.6.1 Introduction . .3 1.6.2 Permissions and Security . .3 1.6.3 File Access . .3 1.6.4 Text Mode vs. Binary Mode . .4 1.6.5 ANSI C Library . .4 1.6.6 Process Creation . .5 1.6.6.1 Problems with process creation . .5 1.6.7 Signals . .6 1.6.8 Sockets . .6 1.6.9 Select . .7 1.7 What’s new and what changed in Cygwin . .7 1.7.1 What’s new and what changed in 3.2 .
    [Show full text]
  • HP T5545 Thin Client Overview
    QuickSpecs HP t5545 Thin Client Overview Introduction The HP t5545 is a new addition to the HP thin client portfolio designed for mainstream business. The HP t5545 offers convenient access to Windows or Citrix environments, mainframes, mid-range servers, Unix/Linux hosts, and web applications. The ThinPro operating system, Firefox browser, terminal emulation, dual monitor support, support for the most common connection brokers, and choice of management solutions provide a great user experience and easy management. A single console provides streamlined and customizable user interface. Front Back 1. Secure USB compartment (2 USB connectors) 1. Cable lock slot 2. Power button with LED 2. 10/100/1000 Ethernet RJ-45 connector 3. Flash activity indicator 3. PS/2 connectors (2) 4. Audio connector (mic in) 4. Parallel port 5. Audio connector (headphone out) 5. Cable management feature 6. USB connectors (2) 6. USB connectors (2) 7. Vertical stand (removable) 7. VGA connector 8. VESA mounting points (4) 8. Serial port (standard in Germany only; available as an option 9. DVI-D connector in other countries) 10. +12V DC power input DA - 13148 North America — Version 4 — February 20, 2009 Page 1 QuickSpecs HP t5545 Thin Client Overview At A Glance HP ThinPro operating system supports modular software updates that can be applied remotely over the network for rapid deployment VIA Eden 1 GHz processor for great performance 512 MB System memory (64 MB reserved for video) 512 MB Flash memory Includes one parallel, one serial, two PS/2, and six USB 2.0 ports (two in back, two in front, and two in secure USB compartment – great for safeguarding USB wireless and Flash devices) MIC in and Audio out ports in front Built in dual monitor support (VGA and DVI-D native) HP Device Manager lets you remotely manage client devices from a central location HP's alliance with Altiris brings a leading management solution to the thin client market.
    [Show full text]
  • Lsl-11 VIDEO TERMINAL USER's GUIDE EK-VT103-UG-001
    LSl-11 VIDEO TERMINAL USER'S GUIDE EK-VT103-UG-001 VT103 LSl-11 VIDEO TERMINAL USER 1 S GUIDE digital equipment corporation • marlboro, massachusetts Preliminary, June 1979 First Edition, September 1979 Second Printing, March 1980 Copyright © 1979 by Digital Equipment Corporation The material in this manual is for informational purposes and is subject to change without notice. Digital Equipment Corporation assumes no responsibility for any errors which may appear in this manual. Printed in U.S.A. This document was set on DIGITAL's DECset-8000 com­ puterized typesetting system. The following are trademarks of Digital Equipment Corporation. Maynard, Massachusetts: DIGITAL DECsystem-10 MASS BUS DEC DECSYSTEM-20 OMNIBUS PDP DIBOL OS/8 DECUS EDUSYSTEM RSTS UNIBUS VAX RSX VMS IAS CONTENTS PREFACE Page CHAPTER 1 OPERATOR INFORMATION 1 . 1 INTRODUCTION ................................................................................................................................. 1 1.2 CONTROLS AND INDICATORS ...................................................................................................... 1 1.2.1 Monitor Controls ....................................................................................................................... 2 1.2.2 Key boa rd Controls .................................................................................................................... 3 1.2.3 Keyboard Indicators ................................................................................................................. 8 1.2.4 Audible
    [Show full text]
  • Hp-3000/4000
    HP-3000/4000 Terminal User’s Guide This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user’s own expense. This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglemente sure le materiel brouilleur du Canada. © 2014 Allegion Document Part Number: 70100-6003 – Rev. 3.3 – 07/15/14 HandPunch is a trademark of Schlage Biometrics, Inc. The trademarks used in this Manual are the property of the trademark holders. The use of these trademarks in this Manual should not be regarded as infringing upon or affecting the validity of any of these trademarks. Schlage Biometrics, Inc. reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without the express written permission from Schlage Biometrics, Inc. Table of Contents Introduction 3 Biometrics
    [Show full text]
  • Bill Krause | Zero to a Million Ethernet Ports + the Epiphany
    Bill Krause | Zero to a Million Ethernet Ports + The Epiphany Derick: So Brandon, I think you'll agree with me that there aren't many people like Bill ​ Krause who can coherently, but also in an entertaining way, tell their biography, right, totally off the cuff. Brandon: Yeah, I totally agree, and it's always awesome to hear unique stories from ​ back in the day. We got to sit down with Bill to talk about his experiences as someone who was really there on the ground floor, bringing whole new categories of technology to market, n this case, first with personal computing, and then with networking. So Bill was there when a computer was a thing that a company had, or maybe a company department head, and Bill helped make it a thing a person has as the first ​ ​ computer salesperson at HP. Look for all I know when I ate lunch at HP in Palo Alto, as an intern in 2008, four decades earlier, Bill was eating at that same picnic table with Bill Hewlett. Derick: "The first person to sell" in, in this category, personal computing. That is, that is ​ kind of crazy to think about, like - how many billions of dollars is that category now. Brandon: Uh, well searching Google here... it looks like the first search hit. It says $688 ​ billion. And it's growing. Derick: So, so just a little bit of money. ​ Brandon: LIttle bit of money. Yeah. And then to be the CEO of a company that led ​ Ethernet from approximately zero to the first million ports in under a decade, two years before their goal..
    [Show full text]