DOCSLIB.ORG

Residential Wiring

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Residential Wiring Tech-Design Residential Wiring Module Guide Edition 1 37671-E0 FIRST EDITION Second Printing, September 2010 Copyright 2005-2010 Lab-Volt Systems, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical, photocopied, recorded, or otherwise, without prior written permission from Lab-Volt Systems, Inc. Information in this document is subject to change without notice and does not represent a commitment on the part of Lab-Volt Systems, Inc. The multimedia Tech-Design software and other materials described in this document are furnished under a license agreement or a nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement. ISBN 978-0-86657-671-0 Lab-Volt and Tech-Design are registered trademarks of Lab-Volt Systems, Inc. WindowsTM is a trademark of Microsoft Corp. All other trademarks belong to their respective owners. Lab-Volt License Agreement By using the software in this package, you are agreeing to 7. Miscellaneous. This agreement is governed by the laws of become bound by the terms of this License Agreement, the State of New Jersey. Limited Warranty, and Disclaimer. This License Agreement constitutes the complete Limited Warranty and Disclaimer agreement between you and Lab-Volt. If you do not agree This CD-ROM software has been designed to assure correct to the terms of this agreement, do not use the software. operation when used in the manner and within the limits Promptly return the multimedia (CD-ROM) compact described in the Tech-Lab® Multimedia Installation & User’s discs and all other materials that are part of Lab-Volt's Guide. As a highly advanced software product, it is quite multimedia Tech-Design product within ten days to Lab- complex; thus, it is possible that if it is used in hardware Volt for a full refund or credit. configurations with characteristics other than those specified 1. License Grant. In consideration of payment of the license in Tech-Lab® Multimedia Installation & User’s Guide or in fee, which is part of the price you paid for this Lab-Volt environments with non-specified, unusual, or extensive other product, Lab-Volt, as Licensor, grants to you, the Licensee, a software products, problems may be encountered by a user. In nonexclusive, nontransferable license to use this copy of the such cases, Lab-Volt will make reasonable efforts to assist the CD-ROM software with the corresponding curriculum user to properly operate the CD-ROM but without resources. Lab-Volt reserves all rights not expressly granted guaranteeing its proper performance in any hardware or to the Licensee. software environment other than as described in the Tech- 2. Ownership. As the Licensee, you own the physical media Lab® Multimedia Installation & User’s Guide. on which the CD-ROM is originally or subsequently recorded This CD-ROM software is warranted to conform to the or fixed, but Lab-Volt retains title to and ownership of the descriptions of its functions and performance as outlined in software programs recorded on the original compact disc and the courseware documentation. Upon proper notification and any subsequent copies of the CD-ROM, regardless of the within a period of one year from the date of installation and/or form or media in or on which the original and other copies customer acceptance, Lab-Volt, at its sole and exclusive may exist. This license is not a sale of the original software option, will remedy any nonconformity or replace any program of Lab-Volt's CD-ROM or any portion or copy of it. defective compact disc free of charge. Any substantial 3. Copy Restrictions. The CD-ROM software and the revisions of this product, made for purposes of correcting accompanying materials are copyrighted and contain software deficiencies within the warranty period, will be made proprietary information and trade secrets of Lab-Volt. available, also on a licensed basis, to registered owners free of Unauthorized copying of the CD-ROM even if modified, charge. Warranty support for this product is limited, in all merged, or included with other software or with written cases, to software errors. Errors caused by hardware materials is expressly forbidden. You may be held legally malfunctions or the use of non-specified hardware or other responsible for any infringement of Lab-Volt's intellectual software are not covered. property rights that is caused or encouraged by your failure to LICENSOR MAKES NO OTHER WARRANTIES OF ANY KIND abide by the terms of this agreement. You may make copies CONCERNING THIS PRODUCT, INCLUDING WARRANTIES of the CD-ROM solely for backup purposes provided the OR MERCHANTABILITY OR OF FITNESS FOR A copyright notice is reproduced in its entirety on the backup PARTICULAR PURPOSE. LICENSOR DISCLAIMS ALL OBLIGATIONS AND LIABILITIES ON THE PART OF copy. LICENSOR FOR DAMAGES, INCLUDING BUT NOT LIMITED 4. Permitted Uses. This CD-ROM and all accompanying TO SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT documentation is licensed to you, the Licensee, and may not OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE be transferred to any third party for any length of time without PRODUCT LICENSED UNDER THIS AGREEMENT. the prior written consent of Lab-Volt. You may not modify, Questions concerning this agreement and warranty and all adapt, translate, reverse engineer, decompile, disassemble, or requests for product repairs should be directed to Lab-Volt create derivative works based on the Lab-Volt product field representative in your area. without the prior written permission of Lab-Volt. Written LAB-VOLT SYSTEMS, INC. materials provided to you may not be modified, adapted, P.O. Box 686 translated, or used to create derivative works without the prior Farmingdale, NJ 07727 written consent of Lab-Volt. Attention: Program Development 5. Termination. This agreement is effective until terminated. Phone: (732) 938-2000 or (800) LAB-VOLT It will terminate automatically without notice from Lab-Volt Fax: (732) 774-8573 if you fail to comply with any provisions contained herein. Technical Support: (800) 522-4436 Upon termination you shall destroy the written materials, Lab- Technical Support E-Mail: [email protected] Volt's CD-ROM software, and all copies of them, in part or in whole, including modified copies, if any. 6. Registration. Lab-Volt may from time to time update the CD-ROM. Updates can be made available to you only if a properly signed registration card is filed with Lab-Volt or an authorized registration card recipient. Residential Wiring Table of Contents THIS PAGE IS SUPPOSE TO BE BLANK Introduction ................................................................................................................... 1 Welcome to Residential Electrical Wiring!.................................................................. 1 Introduction to Residential Electrical Wiring............................................................... 2 Understanding Residential Electricity......................................................................... 3 The Basic Home Electrical System............................................................................ 5 Circuit Basics........................................................................................................ 7 The Service Panel ................................................................................................ 8 Circuit Breakers and Fuses .................................................................................. 8 Grounding............................................................................................................. 9 NEC (National Electrical Code) .......................................................................... 10 About Cables and Wires..................................................................................... 11 Safety ................................................................................................................. 12 Residential Electrical Wiring Trainer......................................................................... 13 Lesson 1 – Wiring a Subpanel ................................................................................. 15 Lesson 2 – Wire a 30-Amp 120/240V Receptacle ................................................... 24 Lesson 3 – Wire a Switch-Controlled Light Fixture .................................................. 29 Lesson 4 – Wire a Switch-Controlled Receptacle .................................................... 36 Lesson 5 – Wire Two Receptacles in Sequence...................................................... 41 Lesson 6 – Wire a Switch-Controlled Split Receptacle ............................................ 45 Lesson 7 – Wire Three-Way Switches and Light Fixture ......................................... 52 Lesson 8 – Wire a Doorbell...................................................................................... 61 Lesson 9 – Install a Phone Jack .............................................................................. 67 Lesson 10 – Install a Coaxial Cable Connector ....................................................... 70 Independent Study Projects..................................................................................... 74 Reference A How to Strip Wire and Cable ................................................................ 76 Module Guide i Residential Wiring Table of Contents ii Module Guide Residential Wiring Introduction INTRODUCTION Welcome to Residential
Load more

Recommended publications
  • Commercial and Industrial Wiring. INSTITUTION Mid-America Vocational Curriculum Consortium, Stillwater, Okla
    DOCUMENT RESUME ED 319 912 CE 054 850 AUTHOR Kaltwasser, Stan; Flowers, Gary TITLE Commercial and Industrial Wiring. INSTITUTION Mid-America Vocational Curriculum Consortium, Stillwater, Okla. PUB DATE 88 NOTE 710p.; For related documents, see CE 054 849 and CE 055 217. Printed on colored paper. AVAILABLE FROM Mid-America Vocational Curriculum Consortium, 1500 West Seventh Avenue, Stillwater, OK 74074 (order no. 801401: $19.00). PUB TYPE Guides - Classroom Use Guides (For Teachers)(052) EDRS PRICE MF04 Plus Postage. PC Not Available from EDRS. DESCRIPTORS Classroom Techniques; Construction (Process); Course Content; Curriculum Guides; Electrical Occupations; Electrical Systems; *Electric Circuits; *Electricity; *Entry Workers; *Job Skills; *Learning Activities; Learning Modules; Lesson Plans; Postsecondary Education; Secondary Education; Skill Development; Teaching Methods; Test Items; Units of Study IDENTIFIERS *Electrical Wiring ABSTRACT This module is the third in a series of three wiring publications, includes additional technical knowledge and applications required for job entry in the commercial and industrial wiring trade. The module contains 15 instructional units that cover the following topics: blueprint reading and load calculations; tools and equipment; service; transformers; rough-in; lighting; motors and controllers; electrical diagrams and symbols; two and three wire controls; separate control circuits; sequence control circuits; jogging controls; reversing starters; special control circuits; and programmable controls. A special supplement of practice situations is also provided. Each instructional unit follows a standard format that includes some or all of these eight basic components: performance objectives, suggested activities or teachers and students, information sheets, assignment sheets, job sheets, visual aids, tests, and answers to tests and assignment sheets. All of the unit components focus on measurable and observable learning outcomes and are designed for use for more than one lesson or class period.
    [Show full text]
  • Connecting to the Grid – Alberta's New Micro-Generation Regulations
    Connecting to the Grid – Alberta’s New Micro-Generation Regulations Solar Energy Society of Canada – Northern Alberta Chapter MacEwan College 2009 April 21 www.macewan.ca www.solaralberta.ca Gordon Howell, P.Eng. E-mail: [email protected] (download this presentation from www.hme.ca/presentations) Solar Energy Development Specialists 1 Alberta’s Micro-Generation Regulations 5.6 kW solar PV system Riverdale NetZero energy house Edmonton z What does this mean to us? www.riverdalenetzero.ca Connected to EPCOR D&T z How do we use the regulations? z Who can use the regulations? z Are the regulations as easy as they sound? z Will they allow us to generate all our own electricity? z What price will we get paid for our electricity? z Can we make money at it? 8.4 kW solar PV system Laebon Homes net zero energy house z What will our electricity bill look like? Red Deer www.laebon.com Connected to Red Deer Electric Light and Power z What do you do if your electricity delivery company says “no”? 8.4 kW solar PV system Avalon Central Alberta net zero energy house Red Deer Solar Energywww.avaloncentralalberta.com Development Specialists 2 Connected to Red Deer Electric Light and Power Intro: The Prime Focus of this Presentation Prime Focus Not Covered z House-sized micropower systems z Business-sized micropower systems z Inverter-based micropower systems z Synchronous or induction generators using solar or microwind z Systems grid-connected to EPCOR z Systems grid-connected to other and FortisAlberta in the Edmonton electricity deliver companies not in the area Edmonton area z Regulatory paperwork process for z How micropower systems work, getting your micropower system how to design or size them, approved how to find suppliers, what are the costs and economics (these subjects are covered in other presentations) You must skate to where the puck is going 3 …not to where it is now.Solar Energy Development Specialists Wayne Gretzky Three points to take away… 1.
    [Show full text]
  • Electrical – Wiring Methods, Components and Equipment for General Use
    Electrical – Wiring Methods, Components and Equipment for General Use Approved for Public Release; Further Dissemination Unlimited At the completion of this unit you shall be able to: 1. Utilize section Z of the Safety and Health Hazard Inspection Program Checklist to identify compliant and non-compliant safety behaviors. 2. Identify areas of concern requiring immediate action to mitigate or prevent a possible injury. Please use “Slide Show” to properly view this presentation! • Let’s start with a discussion of Electrical Safety. Whenever you work with electrical devices there is a risk of electrical hazards, especially electrical shock. Risks are increased at maintenance and construction sites because many jobs involve electric power tools. Coming in contact with an electrical voltage can cause current to flow through the body, resulting in electrical shock and burns. Serious injury or even death may occur. Electricity has long been recognized as a serious workplace hazard, exposing employees to electric shock, electrocution, burns, fires, and explosions. In 1999, for example, 278 workers died from electrocutions at work, accounting for almost 5 percent of all on-the-job fatalities that year, according to the Bureau of Labor Statistics. What makes these statistics more tragic is that most of these fatalities could have been easily avoided. • When an electrical shock enters the body it may produce different types of injuries. Electrocution results in internal and external injury to body parts or the entire body – often resulting in death. After receiving a “jolt” of electricity all or part of the body may be temporarily paralyzed and this may cause loss of grip or stability.
    [Show full text]
  • EWIS Practices Job Aid 2.0
    Aircraft EWIS Practices Job Aid 2.0 Federal Aviation Administration Aircraft Electrical Wiring Interconnect System (EWIS) Best Practices Job Aid Revision: 2.0 This job aid covers applicable 14 CFR part 25 aircraft (although it is also widely acceptable for use with other types of aircraft such as military, small airplanes, and rotorcraft). This job aid addresses policy; industry EWIS practices; primary factors associated with EWIS degradation; information on TC/STC data package requirements; EWIS selection and protection; routing, splicing and termination practices; and EWIS maintenance concepts (including how to perform a EWIS general visual inspection). The job aid also includes numerous actual aircraft EWIS photos and examples. UNCONTROLLED COPY WHEN DOWNLOADED 1 Aircraft EWIS Practices Job Aid 2.0 Additional Notes • This presentation contains additional speaker notes for most slides • It’s advisable to read these notes while viewing the slide presentation Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 2 Administration UNCONTROLLED COPY WHEN DOWNLOADED 2 Aircraft EWIS Practices Job Aid 2.0 Printing the Additional Notes To print the slides and accompanying speaker notes: – Navigate back to the FAA Aircraft Certification job aids web page – Open and print Printable Slides and Notes Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 3 Administration UNCONTROLLED COPY WHEN DOWNLOADED 3 Aircraft EWIS Practices Job Aid 2.0 Background • Why the need for EWIS best practices Job Aid? – Accident/Incident Service History – Aging Transport Systems Rulemaking Advisory Committee (ATSRAC) – Enhanced Airworthiness Program for Airplane System (EAPAS) – EAPAS Rule Making Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 4 Administration Historically, wiring and associated components were installed without much thought given to the aging aspects: • Fit and forget.
    [Show full text]
  • ELCB Testers
    Technical Catalogue 1904 Test & Measurement Hoyt ELCB Testers General ELCB Testers TEL1 ................................................................................................... 2 Analogue ELCB Testers 810 EL ................................................................................................ 3 1810 EL .............................................................................................. 4 Digital ELCB Testers 1112 EL .............................................................................................. 5 1113 EL .............................................................................................. 6 1612 EL .............................................................................................. 7 8012 EL .............................................................................................. 8 1811 EL .............................................................................................. 9 1812 EL .............................................................................................. 10 1813 EL .............................................................................................. 11 2712 EL .............................................................................................. 12 2820 EL .............................................................................................. 13 4112 EL .............................................................................................. 14 6220 EL .............................................................................................
    [Show full text]
  • Answer the Purpose: 4
    Page 26 1. CONDUCTORS Conductors are defined as materials that easily allow the flow of _________. Metals are _______ conductors while insulators are ______ . The 2 common metals used for conductors in the electrical trade are: ___________ and ______________. Aluminium has become more prevalent for larger C.S.A. conductors as it is cheaper and lighter but more brittle than copper. Current/ Copper/ Aluminium Thermoplastic-sheathed cable (TPS) consists of an outer toughened sheath of polyvinyl chloride (PVC) (the thermoplastic element) covering one or more individual cables which are PVC insulated annealed copper conductors. It is a commonly used type of wiring for residential and light commercial construction in many countries. The flat version of the cable with two insulated conductors and an uninsulated earth conductor all within the outer sheath is referred to as twin and earth. In mainland Europe, a round equivalent is more common. Flat cables (or festoon cables) are made in PVC and Neoprene and are used as trailing cables for cranes, open filed conveyors and shelve service devices. Flat cables offer the advantages of extremely small bending radius’s, high flexibility and minimum wastage of space. Thermoplastic-sheathed cable (TPS) consists of an outer toughened sheath of polyvinyl chloride (PVC) (the thermoplastic element) covering one or more individual cables which are PVC insulated annealed copper conductors. It is a commonly used type of wiring for residential and light commercial construction in many countries. The flat version of the cable with two insulated conductors and an uninsulated earth conductor all within the outer sheath is referred to as twin and earth.
    [Show full text]
  • Electrical Best Practices Page |1
    Electrical Best Practices Page |1 Contents Scope ........................................................................................................................................................................................................................... 9 Common Electrical Problems ...................................................................................................................................................................................... 10 GENERAL INFORMATION ........................................................................................................................................................................................ 10 FAILURE MODES ..................................................................................................................................................................................................... 10 Short Circuit ........................................................................................................................................................................................................ 10 Open Circuit........................................................................................................................................................................................................ 10 Intermittent Circuit ............................................................................................................................................................................................. 11 Sources
    [Show full text]
  • Electrical Idaho Statutes and Administrative Rules
    2020 Electrical Electrical Idaho Statutes and Administrative Rules Table of Contents Idaho Statutes TITLE 54. PROFESSIONS, VOCATIONS, AND BUSINESSES CHAPTER 10. ELECTRICAL CONTRACTORS AND JOURNEYMAN Declaration of policy Idaho Code § 54-1001 Inspection provisions inapplicable when installation covered by municipal Idaho Code § 54-1001B ordinance Inspections within municipalities -- When authorized Idaho Code § 54-1001C Inspections of modular buildings -- When authorized -- Approval and certi- Idaho Code § 54-1001D fication License essential to engage in business -- Licensure authority exclusive to Idaho Code § 54-1002 the state Administrator authority Idaho Code § 54-1003 Definitions Idaho Code § 54-1003A Inspection of electrical installations -- Notice of corrections -- Disconnect- Idaho Code § 54-1004 ing electrical service Rules -- Inspections -- Inspection permits and fees Idaho Code § 54-1005 Idaho electrical board Idaho Code § 54-1006 Issuance of licenses -- Reciprocity Idaho Code § 54-1007 Duration of license Idaho Code § 54-1008 Revocations or suspension of licenses -- Hearings -- taking testimony Idaho Code § 54-1009 Installations by electrical contractor performed by licensed journeyman -- Idaho Code § 54-1010 Prior certificate holders entitled to license -- List of electricians in contrac- tor’s employ Renewal of licenses or Registrations – inactive licenses Idaho Code § 54-1013 Fees Idaho Code § 54-1014 “Electrical Board Fund” established Idaho Code § 54-1015 Exemptions Idaho Code § 54-1016 Violations of act a misdemeanor
    [Show full text]
  • Energy Harvesting from Body Motion Using Rotational Micro-Generation", Dissertation, Michigan Technological University, 2010
    Michigan Technological University Digital Commons @ Michigan Tech Dissertations, Master's Theses and Master's Dissertations, Master's Theses and Master's Reports - Open Reports 2010 Energy harvesting from body motion using rotational micro- generation Edwar. Romero-Ramirez Michigan Technological University Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Mechanical Engineering Commons Copyright 2010 Edwar. Romero-Ramirez Recommended Citation Romero-Ramirez, Edwar., "Energy harvesting from body motion using rotational micro-generation", Dissertation, Michigan Technological University, 2010. https://doi.org/10.37099/mtu.dc.etds/404 Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Mechanical Engineering Commons ENERGY HARVESTING FROM BODY MOTION USING ROTATIONAL MICRO-GENERATION By EDWAR ROMERO-RAMIREZ A DISSERTATION Submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY (Mechanical Engineering-Engineering Mechanics) MICHIGAN TECHNOLOGICAL UNIVERSITY 2010 Copyright © Edwar Romero-Ramirez 2010 This dissertation, "Energy Harvesting from Body Motion using Rotational Micro- Generation" is hereby approved in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY in the field of Mechanical Engineering-Engineering Mechanics. DEPARTMENT Mechanical Engineering-Engineering Mechanics Signatures: Dissertation Advisor Dr. Robert O. Warrington Co-Advisor Dr. Michael R. Neuman Department Chair Dr. William W. Predebon Date Abstract Autonomous system applications are typically limited by the power supply opera- tional lifetime when battery replacement is difficult or costly. A trade-off between battery size and battery life is usually calculated to determine the device capability and lifespan. As a result, energy harvesting research has gained importance as soci- ety searches for alternative energy sources for power generation.
    [Show full text]
  • Alberta Utilities Commission Micro-Generation Application
    www.auc.ab.ca MICRO-GENERATION NOTICE SUBMISSION GUIDELINE (Version 2.0) September 20, 2017 Table of Contents 1. Introduction ........................................................................................................................................ 2 2. Purpose ......................................................................................................................................... 2 3. Differences between micro-generation and distributed generation ................................................... 2 4. Legal and related matters .................................................................................................................. 3 5. Disclaimer ......................................................................................................................................... 4 6. Micro-generation generating units – types and size .......................................................................... 4 7. Principal stakeholders........................................................................................................................ 5 8. Micro-generation application process summary ................................................................................ 5 9. Guidelines for filing a Micro-Generation Notice form ......................................................................... 7 10. Electricity compensation .................................................................................................................. 11 11. Obligations ......................................................................................................................................
    [Show full text]
  • Operators Manual for KDS Manual Provides Installation, Operation, and Maintenance Instructions
    Operators Manual for KDS Manual provides Installation, Operation, and Maintenance Instructions Model: KDS Kitchen Distribution System Form#: OM015_KDS Date: 11-2016 - Rev1 INTRODUCTION Upon receipt of the Halton KDS (Kitchen Distribution System), inspect the crates immediately for any shipping damage and notify the carrier immediately if damage is found. Halton will not accept responsibility for any shipping damage, but will assist in helping to get a claim filed if needed. The HALTON KITCHEN DISTRIBUTION and SAFETY SYSTEM has been fully assembled and tested at the factory before shipment. When assembled at the installation, according to these instructions, all parts will mate properly and fit according to plan. It should not be necessary for any contractors to make internal modifications. The KDS system is designed for flexibility in satisfying equipment additions and relocations. Once the factory designed KDS is assembled in the field per the original design, movement or additions of Outlets / Gas drops / Water drops / Steam drops etc. is allowed. The “Trade” performing the work shall use UL listed or UR recognized components and will not make additions that will exceed the unit’s UL rating. Note: Refer to the following instructions and drawings for proper installation. HALTON shall not be responsible or liable for improper operation of the KITCHEN DISTRIBUTION and SAFETY SYSTEM due to any design or assembly modifications, or error, of other engineers or contractors. IMPORTANT INFORMATION Read these instructions carefully before commencing installation or maintenance on unit. In order to ensure the performance of the system it is essential that routine maintenance is carried out in accordance with the following instructions.
    [Show full text]
  • Electrical Wiring - OR - WHY DO WE NEED ALL THIS COPPER?!
    Electrical Wiring - OR - WHY DO WE NEED ALL THIS COPPER?! BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Objectives • Identify Types of Wires – Size – Insulation • Installation Methods – Pulling – Blowing • Grounding and Bonding – How, where and why – Testing • Splicing conductors – Where are splices permitted? – Splice “kits” – Testing • Terminations – Proper cable/wire termination methods • Electrical Services – Installation and Service Connection • Documentation – Asbuilts – LABEL!! BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Wire Size Wire size is measured in AWG (American Wire Gauge) • The AWG number identifies the size of the conductors the smaller the number the larger the diameter (AWG 0000 – 0.46 in , AWG 18 – 0.04 in) • NEC defines process for calculating wire size based on Current, Voltage and length of wire. • Changes in routing may require a change in the wire used to cabinets or field elements. • Most household wiring is usually 12 or 14 AWG • DOT Signal, Lighting and ITS wires range from 18 AWG for communications interconnect to 00+ for power service. • AWG # wire can be either solid or stranded . BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Determining Conductor Size • Typically ampacity and sizing is determined by the designer and provided on the plans • De-rating of conductors may need to be determined if the cable routing is revised by field personnel or final job layout – Derating process is documented in the NEC. Generally requires a review of installation conditions and cable rating. BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Conductor Insulation and jacket Types Insulation and Jacketing identified in Standard Specifications .
    [Show full text]