DOCSLIB.ORG

Electrical Best Practices Page |1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Electrical Best Practices Page |1 Electrical Best Practices Page |1 Contents Scope ........................................................................................................................................................................................................................... 9 Common Electrical Problems ...................................................................................................................................................................................... 10 GENERAL INFORMATION ........................................................................................................................................................................................ 10 FAILURE MODES ..................................................................................................................................................................................................... 10 Short Circuit ........................................................................................................................................................................................................ 10 Open Circuit........................................................................................................................................................................................................ 10 Intermittent Circuit ............................................................................................................................................................................................. 11 Sources of Electrical Problems ............................................................................................................................................................................ 12 OEM and Auxiliary Battery Guidelines ........................................................................................................................................................................ 17 OEM BATTERY GUIDELINES ..................................................................................................................................................................................... 17 General Information ........................................................................................................................................................................................... 17 Discharge Prevention .......................................................................................................................................................................................... 18 Charging Procedures ........................................................................................................................................................................................... 19 OEM BATTERY RELOCATION GUIDELINES ............................................................................................................................................................ 20 Location .............................................................................................................................................................................................................. 20 Vibration: ........................................................................................................................................................................................................... 20 Accessibility ........................................................................................................................................................................................................ 20 Tilt Angles ........................................................................................................................................................................................................... 21 Temperature ...................................................................................................................................................................................................... 21 AUXILIARY BATTERY GUIDELINES ............................................................................................................................................................................ 21 General Information ........................................................................................................................................................................................... 21 Location .............................................................................................................................................................................................................. 21 Venting ............................................................................................................................................................................................................... 22 Mounting and Fastening ..................................................................................................................................................................................... 22 Connecting and Grounding ................................................................................................................................................................................. 22 Best Practices – Electrical 2018 Revised Date: 09/30/2017 Electrical Best Practices Page |2 Cable Sizing......................................................................................................................................................................................................... 22 BATTERY DISCHARGE LIMITER GUIDELINES ......................................................................................................................................................... 23 Electrical System Interfacing – New Circuit Guidelines ................................................................................................................................................ 25 NEW CIRCUIT GUIDELINES .................................................................................................................................................................................. 25 Interfacing to the OEM Electrical System ............................................................................................................................................................ 25 Body Builder Junction Block/Connector .............................................................................................................................................................. 26 EXTENDING OEM CIRCUIT GUIDELINES ............................................................................................................................................................... 26 Electrical System Interfacing – Design Guidelines........................................................................................................................................................ 28 Design Guidelines ................................................................................................................................................................................................... 28 Cable (Wire) Selection Guidelines ....................................................................................................................................................................... 28 Cable Ampacity ................................................................................................................................................................................................... 28 Design Recommendations .................................................................................................................................................................................. 28 Cable (Wire) Types.................................................................................................................................................................................................. 29 • Passenger compartment .................................................................................................................................................................................. 29 • Engine compartment ....................................................................................................................................................................................... 29 Typical Calculation Example ................................................................................................................................................................................ 32 WIRE HARNESS ASSEMBLY GUIDELINES .................................................................................................................................................................. 33 Design Recommendations .................................................................................................................................................................................. 33 CONNECTING GUIDELINES ...................................................................................................................................................................................... 33 Design Recommendations .................................................................................................................................................................................. 33 CONNECTOR TYPES ................................................................................................................................................................................................
Load more

Recommended publications
  • Commercial and Industrial Wiring. INSTITUTION Mid-America Vocational Curriculum Consortium, Stillwater, Okla
    DOCUMENT RESUME ED 319 912 CE 054 850 AUTHOR Kaltwasser, Stan; Flowers, Gary TITLE Commercial and Industrial Wiring. INSTITUTION Mid-America Vocational Curriculum Consortium, Stillwater, Okla. PUB DATE 88 NOTE 710p.; For related documents, see CE 054 849 and CE 055 217. Printed on colored paper. AVAILABLE FROM Mid-America Vocational Curriculum Consortium, 1500 West Seventh Avenue, Stillwater, OK 74074 (order no. 801401: $19.00). PUB TYPE Guides - Classroom Use Guides (For Teachers)(052) EDRS PRICE MF04 Plus Postage. PC Not Available from EDRS. DESCRIPTORS Classroom Techniques; Construction (Process); Course Content; Curriculum Guides; Electrical Occupations; Electrical Systems; *Electric Circuits; *Electricity; *Entry Workers; *Job Skills; *Learning Activities; Learning Modules; Lesson Plans; Postsecondary Education; Secondary Education; Skill Development; Teaching Methods; Test Items; Units of Study IDENTIFIERS *Electrical Wiring ABSTRACT This module is the third in a series of three wiring publications, includes additional technical knowledge and applications required for job entry in the commercial and industrial wiring trade. The module contains 15 instructional units that cover the following topics: blueprint reading and load calculations; tools and equipment; service; transformers; rough-in; lighting; motors and controllers; electrical diagrams and symbols; two and three wire controls; separate control circuits; sequence control circuits; jogging controls; reversing starters; special control circuits; and programmable controls. A special supplement of practice situations is also provided. Each instructional unit follows a standard format that includes some or all of these eight basic components: performance objectives, suggested activities or teachers and students, information sheets, assignment sheets, job sheets, visual aids, tests, and answers to tests and assignment sheets. All of the unit components focus on measurable and observable learning outcomes and are designed for use for more than one lesson or class period.
    [Show full text]
  • Connecting to the Grid – Alberta's New Micro-Generation Regulations
    Connecting to the Grid – Alberta’s New Micro-Generation Regulations Solar Energy Society of Canada – Northern Alberta Chapter MacEwan College 2009 April 21 www.macewan.ca www.solaralberta.ca Gordon Howell, P.Eng. E-mail: [email protected] (download this presentation from www.hme.ca/presentations) Solar Energy Development Specialists 1 Alberta’s Micro-Generation Regulations 5.6 kW solar PV system Riverdale NetZero energy house Edmonton z What does this mean to us? www.riverdalenetzero.ca Connected to EPCOR D&T z How do we use the regulations? z Who can use the regulations? z Are the regulations as easy as they sound? z Will they allow us to generate all our own electricity? z What price will we get paid for our electricity? z Can we make money at it? 8.4 kW solar PV system Laebon Homes net zero energy house z What will our electricity bill look like? Red Deer www.laebon.com Connected to Red Deer Electric Light and Power z What do you do if your electricity delivery company says “no”? 8.4 kW solar PV system Avalon Central Alberta net zero energy house Red Deer Solar Energywww.avaloncentralalberta.com Development Specialists 2 Connected to Red Deer Electric Light and Power Intro: The Prime Focus of this Presentation Prime Focus Not Covered z House-sized micropower systems z Business-sized micropower systems z Inverter-based micropower systems z Synchronous or induction generators using solar or microwind z Systems grid-connected to EPCOR z Systems grid-connected to other and FortisAlberta in the Edmonton electricity deliver companies not in the area Edmonton area z Regulatory paperwork process for z How micropower systems work, getting your micropower system how to design or size them, approved how to find suppliers, what are the costs and economics (these subjects are covered in other presentations) You must skate to where the puck is going 3 …not to where it is now.Solar Energy Development Specialists Wayne Gretzky Three points to take away… 1.
    [Show full text]
  • Electrical – Wiring Methods, Components and Equipment for General Use
    Electrical – Wiring Methods, Components and Equipment for General Use Approved for Public Release; Further Dissemination Unlimited At the completion of this unit you shall be able to: 1. Utilize section Z of the Safety and Health Hazard Inspection Program Checklist to identify compliant and non-compliant safety behaviors. 2. Identify areas of concern requiring immediate action to mitigate or prevent a possible injury. Please use “Slide Show” to properly view this presentation! • Let’s start with a discussion of Electrical Safety. Whenever you work with electrical devices there is a risk of electrical hazards, especially electrical shock. Risks are increased at maintenance and construction sites because many jobs involve electric power tools. Coming in contact with an electrical voltage can cause current to flow through the body, resulting in electrical shock and burns. Serious injury or even death may occur. Electricity has long been recognized as a serious workplace hazard, exposing employees to electric shock, electrocution, burns, fires, and explosions. In 1999, for example, 278 workers died from electrocutions at work, accounting for almost 5 percent of all on-the-job fatalities that year, according to the Bureau of Labor Statistics. What makes these statistics more tragic is that most of these fatalities could have been easily avoided. • When an electrical shock enters the body it may produce different types of injuries. Electrocution results in internal and external injury to body parts or the entire body – often resulting in death. After receiving a “jolt” of electricity all or part of the body may be temporarily paralyzed and this may cause loss of grip or stability.
    [Show full text]
  • EWIS Practices Job Aid 2.0
    Aircraft EWIS Practices Job Aid 2.0 Federal Aviation Administration Aircraft Electrical Wiring Interconnect System (EWIS) Best Practices Job Aid Revision: 2.0 This job aid covers applicable 14 CFR part 25 aircraft (although it is also widely acceptable for use with other types of aircraft such as military, small airplanes, and rotorcraft). This job aid addresses policy; industry EWIS practices; primary factors associated with EWIS degradation; information on TC/STC data package requirements; EWIS selection and protection; routing, splicing and termination practices; and EWIS maintenance concepts (including how to perform a EWIS general visual inspection). The job aid also includes numerous actual aircraft EWIS photos and examples. UNCONTROLLED COPY WHEN DOWNLOADED 1 Aircraft EWIS Practices Job Aid 2.0 Additional Notes • This presentation contains additional speaker notes for most slides • It’s advisable to read these notes while viewing the slide presentation Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 2 Administration UNCONTROLLED COPY WHEN DOWNLOADED 2 Aircraft EWIS Practices Job Aid 2.0 Printing the Additional Notes To print the slides and accompanying speaker notes: – Navigate back to the FAA Aircraft Certification job aids web page – Open and print Printable Slides and Notes Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 3 Administration UNCONTROLLED COPY WHEN DOWNLOADED 3 Aircraft EWIS Practices Job Aid 2.0 Background • Why the need for EWIS best practices Job Aid? – Accident/Incident Service History – Aging Transport Systems Rulemaking Advisory Committee (ATSRAC) – Enhanced Airworthiness Program for Airplane System (EAPAS) – EAPAS Rule Making Aircraft EWIS Best Practices Job Aid 2.0 Federal Aviation 4 Administration Historically, wiring and associated components were installed without much thought given to the aging aspects: • Fit and forget.
    [Show full text]
  • ELCB Testers
    Technical Catalogue 1904 Test & Measurement Hoyt ELCB Testers General ELCB Testers TEL1 ................................................................................................... 2 Analogue ELCB Testers 810 EL ................................................................................................ 3 1810 EL .............................................................................................. 4 Digital ELCB Testers 1112 EL .............................................................................................. 5 1113 EL .............................................................................................. 6 1612 EL .............................................................................................. 7 8012 EL .............................................................................................. 8 1811 EL .............................................................................................. 9 1812 EL .............................................................................................. 10 1813 EL .............................................................................................. 11 2712 EL .............................................................................................. 12 2820 EL .............................................................................................. 13 4112 EL .............................................................................................. 14 6220 EL .............................................................................................
    [Show full text]
  • Answer the Purpose: 4
    Page 26 1. CONDUCTORS Conductors are defined as materials that easily allow the flow of _________. Metals are _______ conductors while insulators are ______ . The 2 common metals used for conductors in the electrical trade are: ___________ and ______________. Aluminium has become more prevalent for larger C.S.A. conductors as it is cheaper and lighter but more brittle than copper. Current/ Copper/ Aluminium Thermoplastic-sheathed cable (TPS) consists of an outer toughened sheath of polyvinyl chloride (PVC) (the thermoplastic element) covering one or more individual cables which are PVC insulated annealed copper conductors. It is a commonly used type of wiring for residential and light commercial construction in many countries. The flat version of the cable with two insulated conductors and an uninsulated earth conductor all within the outer sheath is referred to as twin and earth. In mainland Europe, a round equivalent is more common. Flat cables (or festoon cables) are made in PVC and Neoprene and are used as trailing cables for cranes, open filed conveyors and shelve service devices. Flat cables offer the advantages of extremely small bending radius’s, high flexibility and minimum wastage of space. Thermoplastic-sheathed cable (TPS) consists of an outer toughened sheath of polyvinyl chloride (PVC) (the thermoplastic element) covering one or more individual cables which are PVC insulated annealed copper conductors. It is a commonly used type of wiring for residential and light commercial construction in many countries. The flat version of the cable with two insulated conductors and an uninsulated earth conductor all within the outer sheath is referred to as twin and earth.
    [Show full text]
  • Electrical Idaho Statutes and Administrative Rules
    2020 Electrical Electrical Idaho Statutes and Administrative Rules Table of Contents Idaho Statutes TITLE 54. PROFESSIONS, VOCATIONS, AND BUSINESSES CHAPTER 10. ELECTRICAL CONTRACTORS AND JOURNEYMAN Declaration of policy Idaho Code § 54-1001 Inspection provisions inapplicable when installation covered by municipal Idaho Code § 54-1001B ordinance Inspections within municipalities -- When authorized Idaho Code § 54-1001C Inspections of modular buildings -- When authorized -- Approval and certi- Idaho Code § 54-1001D fication License essential to engage in business -- Licensure authority exclusive to Idaho Code § 54-1002 the state Administrator authority Idaho Code § 54-1003 Definitions Idaho Code § 54-1003A Inspection of electrical installations -- Notice of corrections -- Disconnect- Idaho Code § 54-1004 ing electrical service Rules -- Inspections -- Inspection permits and fees Idaho Code § 54-1005 Idaho electrical board Idaho Code § 54-1006 Issuance of licenses -- Reciprocity Idaho Code § 54-1007 Duration of license Idaho Code § 54-1008 Revocations or suspension of licenses -- Hearings -- taking testimony Idaho Code § 54-1009 Installations by electrical contractor performed by licensed journeyman -- Idaho Code § 54-1010 Prior certificate holders entitled to license -- List of electricians in contrac- tor’s employ Renewal of licenses or Registrations – inactive licenses Idaho Code § 54-1013 Fees Idaho Code § 54-1014 “Electrical Board Fund” established Idaho Code § 54-1015 Exemptions Idaho Code § 54-1016 Violations of act a misdemeanor
    [Show full text]
  • Energy Harvesting from Body Motion Using Rotational Micro-Generation", Dissertation, Michigan Technological University, 2010
    Michigan Technological University Digital Commons @ Michigan Tech Dissertations, Master's Theses and Master's Dissertations, Master's Theses and Master's Reports - Open Reports 2010 Energy harvesting from body motion using rotational micro- generation Edwar. Romero-Ramirez Michigan Technological University Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Mechanical Engineering Commons Copyright 2010 Edwar. Romero-Ramirez Recommended Citation Romero-Ramirez, Edwar., "Energy harvesting from body motion using rotational micro-generation", Dissertation, Michigan Technological University, 2010. https://doi.org/10.37099/mtu.dc.etds/404 Follow this and additional works at: https://digitalcommons.mtu.edu/etds Part of the Mechanical Engineering Commons ENERGY HARVESTING FROM BODY MOTION USING ROTATIONAL MICRO-GENERATION By EDWAR ROMERO-RAMIREZ A DISSERTATION Submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY (Mechanical Engineering-Engineering Mechanics) MICHIGAN TECHNOLOGICAL UNIVERSITY 2010 Copyright © Edwar Romero-Ramirez 2010 This dissertation, "Energy Harvesting from Body Motion using Rotational Micro- Generation" is hereby approved in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY in the field of Mechanical Engineering-Engineering Mechanics. DEPARTMENT Mechanical Engineering-Engineering Mechanics Signatures: Dissertation Advisor Dr. Robert O. Warrington Co-Advisor Dr. Michael R. Neuman Department Chair Dr. William W. Predebon Date Abstract Autonomous system applications are typically limited by the power supply opera- tional lifetime when battery replacement is difficult or costly. A trade-off between battery size and battery life is usually calculated to determine the device capability and lifespan. As a result, energy harvesting research has gained importance as soci- ety searches for alternative energy sources for power generation.
    [Show full text]
  • Alberta Utilities Commission Micro-Generation Application
    www.auc.ab.ca MICRO-GENERATION NOTICE SUBMISSION GUIDELINE (Version 2.0) September 20, 2017 Table of Contents 1. Introduction ........................................................................................................................................ 2 2. Purpose ......................................................................................................................................... 2 3. Differences between micro-generation and distributed generation ................................................... 2 4. Legal and related matters .................................................................................................................. 3 5. Disclaimer ......................................................................................................................................... 4 6. Micro-generation generating units – types and size .......................................................................... 4 7. Principal stakeholders........................................................................................................................ 5 8. Micro-generation application process summary ................................................................................ 5 9. Guidelines for filing a Micro-Generation Notice form ......................................................................... 7 10. Electricity compensation .................................................................................................................. 11 11. Obligations ......................................................................................................................................
    [Show full text]
  • Operators Manual for KDS Manual Provides Installation, Operation, and Maintenance Instructions
    Operators Manual for KDS Manual provides Installation, Operation, and Maintenance Instructions Model: KDS Kitchen Distribution System Form#: OM015_KDS Date: 11-2016 - Rev1 INTRODUCTION Upon receipt of the Halton KDS (Kitchen Distribution System), inspect the crates immediately for any shipping damage and notify the carrier immediately if damage is found. Halton will not accept responsibility for any shipping damage, but will assist in helping to get a claim filed if needed. The HALTON KITCHEN DISTRIBUTION and SAFETY SYSTEM has been fully assembled and tested at the factory before shipment. When assembled at the installation, according to these instructions, all parts will mate properly and fit according to plan. It should not be necessary for any contractors to make internal modifications. The KDS system is designed for flexibility in satisfying equipment additions and relocations. Once the factory designed KDS is assembled in the field per the original design, movement or additions of Outlets / Gas drops / Water drops / Steam drops etc. is allowed. The “Trade” performing the work shall use UL listed or UR recognized components and will not make additions that will exceed the unit’s UL rating. Note: Refer to the following instructions and drawings for proper installation. HALTON shall not be responsible or liable for improper operation of the KITCHEN DISTRIBUTION and SAFETY SYSTEM due to any design or assembly modifications, or error, of other engineers or contractors. IMPORTANT INFORMATION Read these instructions carefully before commencing installation or maintenance on unit. In order to ensure the performance of the system it is essential that routine maintenance is carried out in accordance with the following instructions.
    [Show full text]
  • Electrical Wiring - OR - WHY DO WE NEED ALL THIS COPPER?!
    Electrical Wiring - OR - WHY DO WE NEED ALL THIS COPPER?! BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Objectives • Identify Types of Wires – Size – Insulation • Installation Methods – Pulling – Blowing • Grounding and Bonding – How, where and why – Testing • Splicing conductors – Where are splices permitted? – Splice “kits” – Testing • Terminations – Proper cable/wire termination methods • Electrical Services – Installation and Service Connection • Documentation – Asbuilts – LABEL!! BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Wire Size Wire size is measured in AWG (American Wire Gauge) • The AWG number identifies the size of the conductors the smaller the number the larger the diameter (AWG 0000 – 0.46 in , AWG 18 – 0.04 in) • NEC defines process for calculating wire size based on Current, Voltage and length of wire. • Changes in routing may require a change in the wire used to cabinets or field elements. • Most household wiring is usually 12 or 14 AWG • DOT Signal, Lighting and ITS wires range from 18 AWG for communications interconnect to 00+ for power service. • AWG # wire can be either solid or stranded . BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Determining Conductor Size • Typically ampacity and sizing is determined by the designer and provided on the plans • De-rating of conductors may need to be determined if the cable routing is revised by field personnel or final job layout – Derating process is documented in the NEC. Generally requires a review of installation conditions and cable rating. BUREAU OF TRAFFIC OPERATIONS Signals, Lighting & ITS Systems Installation and Inspection Training Conductor Insulation and jacket Types Insulation and Jacketing identified in Standard Specifications .
    [Show full text]
  • Hazard Assessment of Aluminum Electrical Wiring in Residential Use
    NBSIR 75-677 Hazard Assessment of Aluminum Electrical Wiring in Residential Use Elaine D. Bunten, John L. Donaldson, Eugene C. McDowell Product Systems Analysis Division Institute for Applied Technology National Bureau of Standards Washington, D. C. 20234 December 1974 Final Report Prepared for U. S. Consumer Product Safety Commission Washington, D. C. 20207 NBSIR 75-677 HAZARD ASSESSMENT OF ALUMINUM ELECTRICAL WIRING IN RESIDENTIAL USE Elaine D. Bunten, John L. Donaldson, Eugene C. McDowell Product Systems Analysis Division Institute for Applied Technology National Bureau of Standards Washington, D. C. 20234 December 1974 Final Report Prepared for U.S. Consumer Product Safety Commission Washington, D.C. 20207 U. S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS, Richard W. Roberts. Director TABLE of CONTEOTS Page Acknowledgements iv Abstract v 1. Introduction and Executive Summary 1 1.1 Problem Statement 1 1.2 Purpose of this Document 1 1.3 Report Highlights 2 2. Background 3 3. Data Requirements and Data Characteristics 6 3.1 Data Requirements 7 3.1.1 Data Required to Determine Nature and Extent of Use of Aluminum Wiring 8 3.1.2 Data Required to Determine Level of Risk to Consumers 9 3.1.3 Data Required to Describe the Performance of Aluminum Wiring in Residences 10 3.2 Characteristics Required of the Data and Data Collection Procedures 13 3.2.1 Definition of Objectives 13 3.2.2 Sampling Procedures, If Any 14 3.2.3 Potential Sources of Observation Bias 14 3.2.3.1 Nonobservation 14 3.2.3.2 Observing arid Recording Data 15 3.3 Summary 16 i Contents (continued) Page Field Data and Data Sources Examined 17 4.1 Approach 17 4.2 Summary of Data Sources Examined and Their Limitations 19 4.2.1 Systematic Documentation 19 4.2.2 Fire Investigations 20 4.2.3 Incomplete Reporting of Electrical Failures 21 4.2.4 Biases 21 4.3 Summary and Evaluation of Information Found : 21 4.3.1 General 21 4.3.2 Specific Sources of Information 24 4.3.2.1 Consumer Product Safety Commission 24 4.3.2.2 Underwriters' Laboratories, Inc.
    [Show full text]