DOCSLIB.ORG

Bullet Casting Bullet Casting

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Bullet Casting Bullet Casting BULLET CASTING Lyman Sizing Die Diameter Chart BULLET CASTING Item # Diameter Item # Diameter Item # Diameter LY2766462 ......224 LY2766486 ......323 LY2766550 ......409 Lyman’s Digital Lead RCBS Lube-A-Matic - 2 LY2766463 ......225 LY2766487 ......325 LY2766505 ......410 LY2766542 ......243 LY2766488 ......338 LY2766506 ......413 Lyman’s “Big Dipper” Thermometer Bullet Sizer/Lubricator Lyman Sizing Dies LY2766465 ......244 LY2766534 ......354 LY2766508 ......427 The Lyman Digital Thermom- Size and lubricate cast bullets in one step Lee Hardness Testing Kit Electric Casting Fur- Lyman improved sizing LY2766460 ......251 LY2766490 ......355 LY2766537 ......428 No more wasted components eter is a fast and accurate way with the Lube-A-Matic–2. Just insert a dies now have 90 degree LY2766466 ......257 LY2766491 ......356 LY2766509 ......429 nace to check the temperature of bullet in the sizer die and pull the handle. shooting too soft or too hard With 10+ lbs. capacity and hole spacing. It’s now LY2766467 ......258 LY2766492 ......357 LY2766510 ......430 lead. Cast and load with confi- your casting alloy. The long A sized and lubricated bullet ejects on easy to lubricate bul- LY2766543 ......264 LY2766493 ......358 LY2766511 ......431 features like fast heat-up time 6” probe will work with the the upstroke. A fingertip regulator lets dence knowing your alloy is up to the job. Quickly with heat control to +/- 10 degrees. Easy “on-off” lets even with today’s LY2766470 ......266 LY2766494 ......359 LY2766541 ......439 and precisely check hardness of your lead alloy. largest casting furnaces and keeps your hand away you fine-tune lubricant flow. The Lube- hard lubricants. Lyman LY2766551 ......277 LY2766495 ......360 LY2766513 ......446 temperature dial. Compact size with wide mouth from molten lead. The large, easy to read display A-Matic–2 also seats gas checks. A high Exclusive conversion chart tells the maximum op- for easy ladling. sizing dies also feature LY2766471 ......278 LY2766559 ......363 LY2766514 ......450 erating pressure of any lead alloy. Measures the im- can be set for Fahrenheit or Celsius and also fea- quality tool that’s a “must have” item for a tapered mouth and LY2766552 ......284 LY2766497 ......375 LY2766515 ......451 LY2800350 ...............................$52.99 tures a hold button to lock a reading on the display. the serious bullet caster. pression created using the Lee Pocket Microscope. hardened interior ensur- LY2766473 ......285 LY2766527 ......377 LY2766516 ......452 The diameter of the impression relates directly to LY2867797 ...............................$24.99 RC80040 ...Lube-A-Matic–2 ...$199.99 ing alignment for perfect LY2766476 ......308 LY2766524 ......378 LY2766517 ......454 the hardness of the lead alloy. Look up your im- Lyman’s “Big Dipper” RC86880 ......Dust Cover.......$10.99 cylindrical shape. Interior LY2766477 ......309 LY2766498 ......379 LY2766519 ......457 pression diameter in the chart to determine the Casting Starter Kit dimensions correspond LY2766478 ......310 LY2766499 ......380 LY2766535 ......458 hardness and the maximum operating pressure of Includes “Big Dip- to suggested diameters LY2766479 ......311 LY2766500 ......381 LY2766530 ......459 your alloy. per” electric cast- RCBS’s 10 lb. for all popular rifle and LY2766528 ......312 LY2766501 ......400 LY2766525 ......501 LE90924 .................................$67.99 ing furnace with Cast Iron Lead Pot pistol calibers. Refer to LY2766480 ......313 LY2766502 ......401 LY2766520 ......509 10+ lbs. capacity, It features a flat bottom for sta- the chart for proper size. LY2766553 ......314 LY2766504 ......406 LY2766521 ......512 Lyman Casting Dip- bility, bail handle, pouring spout, Sizing Dies ......$29.99 LY2766485 ......321 LY2766548 ......408 per, Ingot Mould for and a tab lifter for gripping with storing excess lead, insulated tongs or pliers. Lyman 4500 Lube Sizer Super Moly Bullet RC80010 .................$21.99 Features solid one piece bottom cast- Lube, Orange Magic ing, heating elements, and a longer RCBS Lube-A-Matic Redding SAECO Bullet Lube, Alox ball knob handle for more leverage Bullet Lube, the Lyman Cast Bullet Handbook and Lube and Sizer Dies Lead Hardness Tester for sizing and lubricating the largest Just insert a bullet in the sizer Lee A SAECO Lead Hardness Tester will pay for itself the Instruction Guide for Lyman Reloading & Bullet bullets. Includes gas check seater and Casting Products. Lyman’s 10 lb. die and pull the handle of the RCBS Lube-A-Mat- Lube & Sizing Kit many times over by allowing you to convert inex- super moly lube. pensive scrap lead of unknown composition into LY2800375 ..............................$103.99 Cast Iron Lead Pot ic-2 bullet sizer lubricator. A sized and lubricated Fastest and easiest way Nominal pot capacity is ten bullet ejects on the up stroke. to lubricate and size cast casting alloy of known and reproduceable hard- pounds of alloy. Flat bottom Lube and Sizer Dies ......................$29.99 bullets. Standard 7/8” - 14 ness. The SAECO Lead Hardness Tester measures Lyman’s “Master Casting Kit” LY2745880 .......4500 w/o Heater ......$203.99 threads fit any reloading alloy hardness by determining the depth of pen- prevents tipping. New design in- LY2745892 ....4500 w/Heater (115 V) ...$221.99 Item # Diameter Item # Diameter With a 10 pound ca- cludes convenient pour spout. press. Bullets are pushed etration of a hardened steel indenter into a bullet. pacity, the electric LY2745896 ...Heating Element (115 V) ...$44.99 RC82200 .......224” RC82225 .......376” through the sizing die nose first, so no special nose Relative hardness of the bullet is read off a vernier Big Dipper can melt LY2867795 ...............................$21.99 RC82240 .......225” RC82252 .......378” punches are needed. Gas checks are automatically scale. SAECO has created a chart that illustrates enough alloy to turn Lyman Gas Check Seater RC82201 .......243” RC82243 .......400” seated and crimped in place. Sized bullets are cap- some commonly encountered alloys, their SAECO out plenty of top This ingenious, patented device allows RC82202 .......244” RC82245 .......401” tured in the special container. Factory Crimp Die values, and where they would fall on the Brinell quality bullets quick- consistent, square seating of gas checks. RC82203 .......257” RC82249 .......408” sold separately. scale. RC82204 .......258” RC82226 .......410” ly. The kit’s low price Works on all Lyman #450, 4500 Sizer/Lubri- Lube & Sizing Kit .........................$19.99 RE42000 ................................$164.99 also includes Lyman’s cators and RCBS Lube-A-Matic. RC82207 .......265” RC82246 .......417” Lyman’s Ingot Mould RC82205 .......277” RC82227 .......427” Item # Diameter Item # Diameter popular improved Ingot Mould produces four easy to use, LY2745881 ...................$11.99 4500 Bullet Sizer/Lu- RC82206 .......278” RC82244 .......428” LE90049 .......224” LE90047 ......357” 1 pound ingots. Each mould forms four, RC82208 .......284” RC82228 .......429” LE90036 .......225” LE90048 ......358” bricator. Simply add easy-to-use ingots that stack easily and Lyman Universal Lube the right top punch and sizing die and the 4500 RC82209 .......285” RC82229 .......430” LE90083 .......243” LE90060 ......401” will weigh approximately 1 lb. Sides of mould have Heater Accessory A will smoothly size down your bullet to the correct RC82211 .......308” RC82230 .......431” LE90261 .......278” LE90052 ......410” 30° draft for easy ejection of lead ingots. This unit heats the Lube/Sizer to RC82212 .......309” RC82253 .......446” LE90170 .......284” LE90053 ......427” diameter while it evenly applies the provided Super the right temperature for smooth, LY2837794 ...............................$25.99 RC82214 .......311” RC82231 .......450” LE90171 .......285” LE90054 ......429” B C Moly lubricant. In addition to the Big Dipper and effortless bullet lubrication. The the 4500 Sizer/Lubricator, the kit features a long RC82242 .......312” RC82232 .......451” LE90037 .......308” LE90062 ......430” mounting plate is drilled and RC82215 .......313” RC82233 .......452” LE90038 .......309” LE90061 ......451” handled casting dipper, a handy ingot mould and E tapped for Lyman 450, RCBS, Saeco and Star Lube/ RC82216 .......314” RC82234 .......454” LE90039 .......311” LE90055 ......452” D the widely acclaimed “Bible of Bullet Casting”; Ly- Sizers. Plugs into standard 115 volt outlet (comes man Cast Bullet Handbook. All this for less than the RC82217 .......321” RC82235 .......457” LE90044 .......314” LE90056 ......454” All Lyman stick lubricants are hollow and fit the RCBS Ingot Mould complete with mounting hardware). 4500 Sizer/ Lubricator and similar Sizing/Lubricat- price of most casting furnaces. Mould up to four ingots at RC82219 .......354” RC82236 .......458” LE90686 .......323” LE90057 ......457” Note: Do not confuse with 4500 heating element. RC82220 .......355” RC82237 .......476” LE90934 .......329” LE90191 ......501” ing tools, including RCBS. LY2712000 ..............................$242.99 once and cool them quickly with this handy acces- LY2745885 ...............................$63.99 sory. It’s perfect for melting down scrap lead and RC82221 .......356” RC82254 .......500” LE90576 .......339” LE90188 ......510” A Lyman’s Orange Magic preparing alloys for future use. RC82222 .......357” RC82250 .......501” LE90046 .......356” Lyman Casting Thermometer RC82223 .......358” RC82255 .......512” Premium Bullet Lube Lyman Mag 25 Digital
Load more

Recommended publications
  • Catalog & Order Form Lead Bullet Technologies
    Lead Bullet Technologies F.I.G ENT., INC. 78592 Hwy 2 Moyie Springs, ID 83845 Catalog & Order Form LBT PREMIUM MOLDS LBT bullet designs are the most copied cast bullets in the world, because, when they are cast in molds manufactured by LBT they are the most accurate bullets available! However, copying the profile of an LBT bullet by cherrying or conventional lathe boring processes, as all other moldmakers do, does not result in molds or bullets that live up to LBT accuracy standards! You see, the heart of all molds, which is the cavities, are produced at LBT with a one of its kind, ultra precision, custom designed, custom built, reducing tracer lathe. This only machine in the world was engineered for the single purpose of producing molds with precision that no available machinery could match. - In the 23 years of its existence, no moldmaker or machine, or mold cutting method has come close to producing LBT quality! - Because of this, the advantages of purchasing your molds from LBT are: 1. Molds which drop their bullets easier then any other mold. 2. Bullets which are better balanced than can be produced in any other molds, because they are round and sound, or free of voids-which equals: 3. Accuracy that is untouchable by bullets from other manufactures molds, even if they have copied our superior designs! Not to mention the design features in LBT molds which ensure void free bullets, flat bases, and extra long service life. LBT sprue plates are designed to minimize the shrink voids and air pockets which unbalance bullets and destroy accuracy, and are equipped with spring hold downs at two points, which prevent the sprue plate from lifting off the mold and causing finned and out of square bases.
    [Show full text]
  • Handloading the .327 Federal Magnum
    Load Development The .327 Federal Magnum was introduced in a Ruger SP101 six-shot revolver. Brian Pearce ederal Cartridge has teamed jacketed bullet 1,400 fps and a Speer with Sturm, Ruger & Com- 115-grain Gold Dot hollowpoint Fpany to introduce a com- 1,300 fps; a Federal “Low Recoil” pletely modern .32-caliber cartridge load pushes an 85-grain Hydra- known as the .327 Federal Mag- Shok 1,330 fps. These velocities num. It is essentially a lengthened are advertised from a Ruger SP101 version of the .32 H&R Magnum revolver with a 31/16-inch barrel. For cartridge with a case length of 1.200 the record, those speeds are realistic, inches, but it’s loaded to signifi- as the test revolver used herein pro- cantly greater pressures of 45,000 duced greater velocities than factory psi. In spite of its name, it utilizes claims. the same .312-inch bullets as other The Ruger SP101 is a small- .32-caliber cartridges, including the frame, double-action revolver, and .32 S&W Long, .32 H&R Magnum when chambered in .327 Federal and .32 WCF (aka .32-20). Magnum, it features six shots rather The .327 Federal Magnum of- than five when the same gun is The .327 Federal Magnum (left) is essentially fers substantial performance and chambered in .38 Special or .357 a lengthened .32 H&R Magnum (right) but is advertised to drive a 100-grain Magnum. This is a stout and un- loaded to significantly greater pressures. 1 LOAD DEVELOPMENT • May-June 2009 loaddata.com Handloading the .327 Federal Magnum Case length for the .327 Federal Magnum is 1.200 inches.
    [Show full text]
  • How to Make Gun Powder the Old Fashioned Way in Less Than 30 Minutes - Ask a Prepper
    10/8/2019 How To Make Gun Powder The Old Fashioned Way in Less Than 30 Minutes - Ask a Prepper DIY Terms of Use Privacy Policy Ask a Prepper Search something.. Survival / Prepping Solutions My Instagram Feed Demo Facebook Demo HOME ALL ARTICLES EDITOR’S PICK SURVIVAL KNOWLEDGE HOW TO’S GUEST POSTS CONTACT ABOUT CLAUDE DAVIS Social media How To Make Gun Powder The Old Fashioned Way in Less Than 30 Minutes Share this article By James Walton Print this article Send e-mail December 30, 2016 14:33 FOLLOW US PREPPER RECOMMENDS IF YOU SEE THIS PLANT IN YOUR BACKYARD BURN IT IMMEDIATELY ENGINEERS CALL THIS “THE SOLAR PANEL KILLER” THIS BUG WILL KILL MOST by James Walton AMERICANS DURING THE NEXT CRISIS Would you believe that this powerful propellant, that has changed the world as we know it, was made as far back as 142 AD? 22LBS GONE IN 13 DAYS WITH THIS STRANGE “CARB-PAIRING” With that knowledge, how about the fact that it took nearly 1200 years for us to TRICK figure out how to use this technology in a gun. The history of this astounding 12X MORE EFFICIENT THAN substance is one that is inextricably tied to the human race. Imagine the great SOLAR PANELS? NEW battles and wars tied to this simple mixture of sulfur, carbon and potassium nitrate. INVENTION TAKES Mixed in the right ratios this mix becomes gunpowder. GREEK RITUAL REVERSES In this article, we are going to talk about the process of making gunpowder. DIABETES. DO THIS BEFORE BED! We have just become such a dependent bunch that the process, to most of us, seems like some type of magic that only a Merlin could conjure up.
    [Show full text]
  • Driving Bands
    These are the bands placed around projectiles to prevent the forward loss of gas around the projectile. They are usually made from copper, gilding metal and sometimes sintered iron. The modern day has intruded here also and they will now be encountered in plastic versions. Their use and introduction can be traced back to the time when cylindrical projectiles first appeared. The original round cannonball because of its requirement to be loaded from the muzzle had no method of sealing the bore. In fact had the ball been tight enough to seal the bore you wouldn't have been able to load the weapon at all. All this changed when the Cylindro-ogival projectile arrived on the scene along with the not-new breech loading weapons. (They had been tried many years before but failed through the inability of the gunners to adequately seal the breeches). A round cannonball needs no stabilizing. Because of its spherical shape it is inherently stable. Ask any cricketer, golfer or baseballer. On the other hand the Cylindro-ogival projectile is inherently unstable. It will not fly very well at all unless it is stabilized in some way. The two basic methods of stabilizing an elongated projectile are: • Fin stabilization and, • Spin stabilization. Both of these methods are in current use in the world today. To provide adequate stability for a projectile using fins there needs to be FIN STABILISATION. some sort of protection for the fins. The arrow of your ancient bowman would not survive in the bore of a cannon without some form of protection.
    [Show full text]
  • Rimfire Firing-Pin Indent Copper Crusher (Part 1)
    NONFERROUSNONFERROUS HEATHEAT TREATING TREATING Rimfire Firing-Pin Indent Copper Crusher (part 1) Daniel H. Herring – The HERRING GROUP, Inc.; Elmhurst, Ill. The Sporting Arms and Ammunition Manufacturers’ Institute Inc., also known as SAAMI, is an association of the nation’s leading manufacturers of rearms, ammunition and components. SAAMI is the American National Standards Institute-accredited standards Fig. 1. Firing-pin indent copper crushers developer for the commercial small arms and ammunition industry. SAAMI was for 22-caliber rimfire ammunition founded in 1926 at the request of the federal government and tasked with: creating and (courtesy of Cox Manufacturing and publishing industry standards for safety, interchangeability, reliability and quality; and Kirby & Associates) coordinating technical data to promote safe and responsible rearms use. he story of SAAMI’s rimfire firing-pin indent copper pressures and increased bullet velocities. crusher describes the reinvention of one of the most The primary advantage of rimfire ammunition is low cost, important tools in the ammunition and firearms industry typically one-fourth that of center fire. It is less expensive to T(Fig. 1). This article explains the purpose and operation manufacture a thin-walled casing with an integral-rimmed of the rimfire firing-pin indent copper crusher and how an primer than it is to seat a separate primer in the center of the unusual chain of events almost led to the disappearance of this head of the casing. simple but important technology. The most common rimfire ammunition is the 22LR (22-caliber long rif le). It is considered the most popular round Rimfire Ammunition in the world and is commonly used for target shooting, small- In order to discuss the rimfire copper crusher, we need to take a game hunting, competitive rifle shooting and, to a lesser extent, step back and first explain what rimfire ammunition is and how it works.
    [Show full text]
  • Loads Are Keeping the .44 Magnum at the Top of The
    Pushing The Envelope Since the late 1990s Randy Garrett has been producing a 330-grain Super Hard Cast Long-Hammerhead at 1,385 fps. Custom gunsmith John Gallagher introduced me to it several years ago. I have found that if you run into John out hunting, he will likely have a cylinderful of Garrett 330s in his custom Ruger Bisley. When Hamilton Bowen went hunting up in Alaska last year, he was camping out in brown bear county. At night he slept with a Redhawk on a lanyard. No, it wasn’t a .475 or .500. It was, in fact, one of his 4-inch ost .44 Magnum shooters may not real- revolvers allows is a longer overall loaded- Kodiak conversions in .44 Mag loaded with Garrett’s 330s. Long cylinders and specialized mega- I’ve been so impressed with the additional performance loads are keeping the .44 Magnum at ize the significance of the extra-long cartridge length. Generally, this means we afforded by having a .44 that works with this type of ammo the top of the heavyweight division. cylinders featured in Ruger Redhawk, can have an extra-heavy bullet seated to less that I now have two custom Blackhawks and a takedown Dan Wesson and a few other revolvers. What depth, thus gaining more room for powder. Marlin rifle specifically built to chamber the Garrett 330. By Ashley Emerson the longer cylinder on these heavy-duty And with a cartridge loaded long—and to Randy Garrett has for years specialized in high-perfor- mance .44 Mag and .45-70 ammo.
    [Show full text]
  • Dictionary of Explosives
    DICTIONARY OF EXPLOSIVES BY ARTHUR MARSHALL A .C .G j., F.I.C., F.C.S. CHEMICAL INSPECTOR INDIAN ORDNANCE DEPARTMENT PHILADELPHIA P. BLAKISTON’S SON & CO. 1012 WALNUT STREET 1920 Printed in Great Britain INTRODUCTION It is a generation since a dictionary of explosives has been published, and, in the meantime, many new explosives have been introduced. It is hoped, therefore, that this small volume, giving concise information about these special materials, may prove useful to those who have to deal with them. In Cundill and Thomson’s “ Dictionary of Explosives,” issued in 1895, there arc many entries of the names of inventors and of mixtures which had been proposed but have never been used commercially, nor are likely to be. As modem explosives were then in their infancy, it was no doubt wise to insert all the available information whether it appeared to be important or not; but now it seems to me better to restrict the scope of the dictionary so as to keep its size within moderate limits. Practically only explosives with special or proprietary names are therefore dealt with here. For information concerning chemical substances, such as the nitro-toluenes and other nitro-compounds, reference should be made to the text-books on explosives and chemistry. A few words may, however, be said here about the nitro- celluloses. These are made by treating cellulose with a mix­ ture of nitric and sulphuric acids, and then purifying the product by washing it thoroughly with hot water. The variety of cellulose most used for this purpose is cotton, and the product obtained from it is frequently called nitrocotton, three special varieties of which are collodion cotton, pyro- collodion and guncotton (q.
    [Show full text]
  • William R. Meehan and John F. Thilenius WILLIAM R
    Pacific Northwest Forest and Range Experiment Station h General Technical Report PNW-152 March 1983 William R. Meehan and John F. Thilenius WILLIAM R. MEEHAN is fisheries The use of trade, firm, or corporation research project leader, and JOHN F. names in this publication is for the THILENIUS is a research wildlife information and convenience of the biologist, Pacific Northwest Forest and reader. Such use does not constitute Range Experiment Station, Forestry an official endorsement or approval by Sciences Laboratory, PO. Box 909, the U.S. Department of Agriculture of Juneau, Alaska 99802. any product or service to the exclusion of others that may be suitable. Meehan, William R.; Thilenius, John F. Brown bears (Ursus arctos) are found The difficulties of training inexperi- Safety in bear country: protective from the seashore to the alpine zone enced persons to properly use large- measures and bullet performance at on the islands and mainland along caliber rifles might be lessened by short range. Gen. Tech. Rep. PNW- most of the Pacific coast of Alaska.’ using smaller caliber weapons. Recoil, 152. Portland, OR: US. Department The brown bear is a large, fast-moving muzzle blast, and rifle weight could be of Agriculture, Forest Service, animal, unpredictable in its response to decreased, but possibly at the expense Pacific Northwest Forest and Range humans, and a definite hazard to those of killing power. To provide an Experiment Station; 1983.16 p. who must work in areas inhabited by inadequate weapon just because it was bears. more pleasant to shoot would be un- Bears are frequently encountered by wise.
    [Show full text]
  • The Los Angeles Silhouette Club
    The Los Angeles Silhouette Club Hunting with the .40-50 Sharps Straight By: Glen E. Fryxell The .40-50 Sharps Straight Contender For more on building the 40-50 Sharps Straight, load work- up & load data. The inspiration for this story can be found in J. D. Jones' project back in 1988 with SSK's custom Contender in the .338 Woodswalker. J.D. designed this round for walking around and kicking the bushes to see what came out, then be able to quickly deal a lethal 10" T/C Contender in 40-50 Sharps blow at short range. I read that article Straight. and liked the idea, absorbed the concept, and wanted to do something similar, except in .40 caliber, built around a moderately heavy cast HP. It has taken a while, but all in all it has come together rather nicely (good things take time...). Let's back up a bit. The Sharps rifle company is well known for making very accurate, large caliber, single-shot rifles that were used in the 1870s by the commercial buffalo hunters. There were a number of rounds that were used by the Sharps folks, but the last one to be introduced was the little .40-50 Sharps Straight, introduced in 1879, just a few years before Sharps went under. The original ballistics produced a 265 grain lead round-nose at 1410 fps. Not exactly laser-like in its ballistics (but note the similarity to the highly capable .44 Magnum). THIS was what I was looking for -- moderate pressure ballistics that were easily compatible with the Contender frame, along with a simple rimmed straight case with a powder column suitable for a handgun-length barrel.
    [Show full text]
  • Load Guide for Rifle and Handgun
    EDITION 3.5 EDITION 30 AR, 30 T/C, and 6mmx45 and T/C, 30 AR, 30 New data for: for: data New • The most up-to-date and comprehensive 223 Rem data available data Rem 223 comprehensive and up-to-date most The • INCLUDES: GUN H D N A AND RIFLE FOR GUIDE LOAD PO Box 158 • Miles City, Montana 59301 Other superior products available ONLY from Western Powders include: RELOADING POWDERS Gun Care Products EDITION 3.5 WARNINGS COMPONENT WARNINGS This guide is intended to be used as a reference. Each individual Primers handloader must determine what is the best and safest load for their 1. NEVER MIX PRIMER BRANDS from different manufacturers; equipment. The loads described in this guide were generated at the 2. Store primers in their original packaging(s) in a cool, dry place. ballistics test facilities of Western Powders, Inc. in accordance with Exposure to heat causes primer deterioration; SAAMI (Shooting Arms and Ammunition Institute) guidelines. All 3. Do not stockpile primers or store in bulk. Storing primers in this loads are fired through test barrels and individual results fired through manner can lead to mass detonation if a primer ignites; different firearms may vary. The handloader is cautioned to read and 4. Do not de-cap live or new primers - fire them in the appropriate follow safe reloading practices such as those outlined in the NRA gun and then de-cap; Guide to Reloading before attempting to reload any cartridge. 5. For best results, use the mildest primer consistent with good ignition; 6.
    [Show full text]
  • And Lastly, by a Taper-Reamer for the Gas-Che
    CONSTRUCTION OF NAVAL GUNS roughing slope bit; fourth, by a finish packed bit; fifth, by a finish slope bit; and lastly, by a taper-reamer for the gas-che<;k slope. The finishing bits are long, of the exact diameter of the chamber (that is, ground so as to bore to the exact diameter) . For guns having the enlarged chamber, as the 6-inch, Mark VI, and 12- inch, Mark III, a different method is pursued. The chamber is nrst roughed out with a hog bit, .then two packed bits are used and two slope bits. The powder chamber being larger than the mouth (or entrance) must be bored with a special boring bar and tool. This bar is hollowed, and is provided with a cutter that can be set out any desired amount by means of internal gearing worked from the outside clear of the breech. Finally the gas-check slope is finished with a taper-reamer. The chambers for R. F. guns are tapered to receive fixed ammu­ nition. Usually they are roughed out to desired taper, using a boring bar carrying a cutter fed in by hand, the rear end of bar being thrown out of line with gun's axis. Chambers having a straight part, and the compression slope, are roughed out with a packed bit. The finishing cut is now taken with a long packe;:l bit, or reamer, ground so as to bore the chamber to exact dimen­ sions. This bit mllst be very accurately made and carefully in­ spected by the officer supervising the work.
    [Show full text]
  • American Rifleman 1970 04.Pdf
    ~Wildcat' Cartridge Packs Kick .357/.44 B&D handgun load has shocking power, long range The recoil of the .357/.44 is heavy but not punishing. 8y 808 MILEK as this high potential cartridge can be brass through the .357/.44 B&D full- OULD you like to work with a W loaded to best even the mighty .44 length sizing die. Case forming requires new magnum-class handgun car- Magnum in factory handgun loadings. very little physical effort, but cases must tridge with an energy potential like the The .357/.44 B&D isn't new in the be well lubricated to keep them from kick of a Missouri mule? If so, consider strictest sense of the word; an earlier sticking in the die. The finished case the .357/.44 Bain & Davis. The des- version was reported on by Dan Cot- is 1.290" long and slips easily into the ignation of this non-standard 'wildcat' terman in the January 1964 issue of chamber of my Contender pistol, with- cartridge is as much a mouthful to say Gun World. He called this cartridge the out the need of trimming. I established as the Thompson/ Center Contender pis- Davis .44/ .357, and it was a little dif- this as my maximum case length and tol chambered for it is a handful to shoot. ferent from the Thompson/Center ver- keep my cases trimmed to that length. sion, having a longer neck and sharper Made by necking down .44 Magnum shoulder. Cotterman's tests were carried brass to accept .357-inch diameter bul- A wide selection out with a converted S&W Model 27 lets, the .357/.44 B&D is a stubby, not- revolver with 834" barrel.
    [Show full text]