MULTIMEDIA 2015 Hear Better, See Better

Total Page:16

File Type:pdf, Size:1020Kb

MULTIMEDIA 2015 Hear Better, See Better Focal North America Head Office 1-844-362-2562 / 1-844-FocalNA MULTIMEDIA 2015 Hear better, see better. DIMENSION TRUE 5.1 SYSTEM Dimension offers an immersive 5.1 sound with realistic and precise sound effects not only in the high frequencies. With a soundstage of 4m and a maximum power of 450W, Dimension performances are equivalent to a very good high-fidelity audio system and are perfect for rooms even measuring over 50m2. DIMENSION SOUNDBAR 5-Channel Sound Bar • Speaker Drivers: 5 ultra-flat speaker-drivers made of paper cones- 3 15/16” (10cm) • Integrated Amplification: 6-channel 450 Watts • Frequency Response: (+/- 6 dB): 50Hz - 25kHz • Inputs: 2 x HDMI™ (OUT/IN) Digital Optical Toslink Analogue 3.5 mm Jack • Subwoofer outputs: Sub Out: Powered output dedicated to Dimension Sub. Sub Line Out: Low-Level output compatible with all amplified subwoofers • Soundbar on furniture (WxDxH): 45-1/4 x 4-1/2 x 4-1/2” (115.5 x11.5 x11.5cm) • Wall-Mounted Soundbar (WxDxH): 45- 1/4 x 2-9/16 x 5-15/16” (115.5 x 6.5 x14.7cm) UMAP MODEL # DIMENSION $1,399.00 2 | www.focal.com Order Desk: [email protected] FOCAL MULTIMEDIA AUDIO DIMENSION SOUNDBAR UMAP DIMENSION SUB BLACK Bass Reflex Subwoofer • Speaker Drivers: 2 Elliptical Woofers 8” x 3” (21cm x 8cm) • Frequency Response: (+/- 6 dB): 30Hz - 110Hz • Mode Zero Vibration Design. • Support for Screen of 50” and over • Subwoofer (WxDxH): 45-1/4 x 12-13/16 x 4-1/2” (115.5 x 32.5x11.5cm) MODEL # DIMENSIONSUB $299.00 SUB AIR Flat Bass Reflex Subwoofer w/ Integrated 150W BASH Amplifier • Focal Design and Sound • Ideal for Home Theater Systems • Flexibility of Installation / Wireless Connection • High-Gloss Finish • Can be wall-mounted, takes up little floor space • Focal’s flattest subwoofer • Easy and quick to install: Synchronization button, phase and volume adjustment • Wireless Transmitter included: LFE and Left/Right Input • Speaker Driver (diameter): 8” (21cm) • Bass Cutoff Frequency: (-6dB) 35Hz • Frequency Response: (+/- 3dB) 40Hz-200Hz • Variable Crossover: 50 Hz - 200 Hz • Input Panel: Left/Right /LFE • Continuous Power Output: 110 W • Peak Power: 150 W • Phase Adjustment: 0 - 180° • Power Functions: Auto On (1 W) OFF (0,5 W) • Dimensions (HxWxD): 16.1” x 14.2” x 6.3” (410mmx360mmx160mm) Wireless Connection: • Range: 15 meters (in a room) • Sound Sampling: 16 bits • Sampling Frequency: 44,1kHz • Coding Delay (latency): 13ms • Radio Transmission Powers or Sensitivity: 0dBm • Radio Transmission Frequency Band 2.4Ghz ISM band MODEL # SUBAIR $599.00 APT X Universal Wireless Receiver • Wireless Transmission with near-CD quality • Compatible with all smartphones and tablet PCs equipped with Bluetooth technology • No dongle required for the mobile device • Easy to install and use • Audio-visual use: low latency • Range of approximately 10 meters without obstacles • RCA extension cable supplied – compatible with all amplifiers equipped with stereo RCA input. MODEL # APTX $129.00 i-fidelity.net 01net Referenz A P É P R V Order Desk: [email protected] www.focal.comO U | 3 ® Focal invents DÔME ..... High End Miniature Speakers DOME 5.1 SLEEK AND 2-Way Compact Sealed Speaker. • Focal Sound with Advanced Technologies • Integrated Speaker: in wall, in ceiling, on furniture or standing INNOVATIVE • High Gloss Lacquered Aluminium body • Also Available in White by Special Order DESIGN. • Made in France Dôme Satellite: SOPHISTICATED • Frequency Response: (±3dB) 80Hz - 28kHz • Low Frequency Point: (-6dB) 72Hz • Sensitivity: (2.83V/1m) 88dB MATERIALS. • Nominal Impedance: 8 Ohms • Minimum Impedance: 4 Ohms • Crossover Frequency: 2500Hz EASY TO • Recommended Amplifier Power: 25 - 100W • Dimensions (HxWxD): 63/4x511/16x55/8” (172x144x143mm) INSTALL. Dôme Subwoofer: Active bass-reflex subwoofer • Driver: 8” (21cm) Polyflex woofer. • Frequency Response: (±3dB) 42Hz - 200Hz • Low Frequency Point: (-6dB) 35Hz • Variable Crossover: 50Hz to 200Hz • Phase Inverter: 0°/180°, Autopower, LFE input. • Recommended Amplifier Power: 100W BASH® • Dimensions (HxWxD): 15-3/4 x 10-7/8 x 10-7/8” (400x276x276mm) UMAP MODEL # DOME51P $1,699.00 • DOME 5.1 WHITE Available by Special Order 4 | www.focal.com Flax Sandwich FOCAL MULTIMEDIA AUDIODetails for midrange driver Flax TechnologyFocal North America Head Office 1-844-362-2562 / 1-844-FocalNA The Unique Qualities of Flax Glass 0.04mm • Flax has many natural properties that • Flax also increases flexural rigidity make it an excellent choice for the through natural low elasticity and Flax 0.4mm manufacturing of a sandwich core possesses a fiberglass lightness due structure. to its hollow stem. Glass 0.04mm • Three key factors required for a high • France, the largest grower of Flax fiber quality loudspeaker sandwich core, low density, in Europe is considered to produce high tensile modulus of one of the best quality Flax fibers in the elasticity and high internal damping world. are found in Flax. DÔME UMAP DOME 5.1 & SUB AIR MODEL # DOME51AIRF FLAX $1,999.00 2-Way Compact Sealed Speaker • Focal Sound with Advanced Technologies • Integrated Speaker: in wall, in ceiling, on furniture or standing • High Gloss Lacquered Aluminium body • Sub Air: Install it anywhere thanks to its wireless connection (wireless transmitter included) • Sub Air: High Gloss Piano Lacquered finish • Frequency Response: (±3dB) 80Hz - 28kHz • Low Frequency Point: (-6dB) 72Hz • Sensitivity: (2.83V/1m) 88dB • Nominal Impedance: 8 Ohms • Minimum Impedance: 4 Ohms • Crossover Frequency: 2500Hz • Recommended Amplifier Power: 25 - 100W • Dimensions (HxWxD): 63/4x511/16x55/8” (172x144x143mm) PACK DOME 1.0 FLAX MODEL # DOME10FB/W 2-Way Compact Sealed Speaker • High-Fidelity Speaker, patented Flax technology $399.00 • Focal Sound with Advanced Technologies • Integrated Speaker: in wall, in ceiling, on furniture or standing • High-Gloss Lacquered Aluminium body Dôme Flax Satellite: • Driver: 4” (10cm) Flax mid-bass 1” (25mm) Al/Mg inverted dome tweeter • Frequency Response: (±3dB) 80Hz - 28kHz • Low Frequency Point: (-6dB) 72Hz • Sensitivity: (2.83V/1m) 88dB • Nominal Impedance: 8 Ohms • Minimum Impedance: 4 Ohms • Crossover Frequency: 2500Hz • Recommended Amplifier Power: 25 - 100W • Dimensions (HxWxD) 6-3/4 x 5-11/16 x 5-5/8” (172x144x143mm) • DOME 1.0 Flax WHITE Available by Special Order PACK DOME 1.0 MODEL # DOME10PB/W POLYGLASS $349.00 2-Way Compact Sealed Speaker • Focal Sound in a Compact and Sophisticated Design • True 2-Way Acoustic Loudspeaker • Integrated Speaker: in wall, in ceiling, on furniture or standing • High-Gloss Lacquered Aluminum body Dôme Satellite: • Drivers: 4” (10cm) Polyglass mid-bass 1” (25mm) Al/Mg inverted dome tweeter • Frequency Response: (±3dB) 80Hz - 28kHz • Low Frequency Point: (-6dB) 72Hz • Sensitivity: (2.83V/1m) 88dB • Nominal Impedance: 8 Ohms • Minimum Impedance: 4 Ohms • Crossover Frequency: 2500Hz • Recommended Amplifier Power: 25 - 100W • Dimensions (HxWxD): 6-3/4 x 5-11/16 x 5-5/8” (172x144x143mm) • DOME 1.0 Polyglass WHITE Available by Special Order PACK STAND DOME MODEL # STANDDOMEB/W • High Gloss $359.00 • Heavy Base for Stability • Cable pass-through • Aluminum Structure • Available in pairs www.focal.com | 5 Focal SIB & CO... ...a new way to live and listen The SIB satellite speaker represents a first foray into the universe of high- fidelity sound and can now look back on an impressive longevity as an entry-level compact acoustic speaker. SIB was designed to simplify daily life, for all types of music or video content. Thanks to its exceptionally practical design and the multiple ways it can be mounted – the speaker can be positioned on the floor, on furniture or on the wall around your screen – SIB is simplicity itself to install. PACK SIB&CO 5.1 2-way Compact Bass Reflex Speaker • Thanks to the tried and tested technologies, the Focal sound is a great first step into the world of high-fidelity • Very high power, compatible with a larger listening area • Five SIB for a balanced Home Theater system • Integrated Speaker : in wall, in ceiling, on furniture or standing • Available in Black • Optional HIP Stands dedicated for SIB SIB Satellite: • Drivers: 5” (13cm) Polyflex mid-bass 3/4” (19mm) mylar dome tweeter • Frequency Response: (+/- 3dB) 75Hz - 20kHz • Low Frequency Point: (-6dB) 69 Hz • Sensitivity: (2.83V/1m) 90 dB • Nominal Impedance: 8 Ohms • Crossover Frequency: 3500 Hz • Recommended Amplifier Power: 15 - 75 W • Dimensions (HxWxD): 247 x 142 x 164 mm UMAP MODEL # SIB51PACK $799.00 6 | www.focal.com FOCAL MULTIMEDIA AUDIO SIB & CO UMAP SIBXL MODEL # SIBXL 2-way Bass Reflex LCR Speaker. Polyfix® wall bracket • The high performances on wall speaker dedicated for flat screen. $269.00 • The Focal sound. • HOP and BOP optional stands. • On Wall/Free Standing mode. • Adjustable logo . • Splash proof. • Drivers: 2 x 5” (2x13cm) Polyflex mid-bass. 3/4” (19mm) Aluminum dome tweeter • OAL Tweeter (Optimum Acoustic Loading) • Frequency Response (+/- 3dB) 67Hz - 35kHz • Low Frequency Point (- 6dB) 59Hz • Sensitivity: (2.83V/1m) 91dB • Nominal Impedance: 8 ohms • Crossover Frequency: 3 500Hz • Recommended Amplifier Power: 15 - 150W • Dimensions (HxWxD): 19-7/8 x 5-5/8 x 4-1/4” (505x142x108mm) HOP STAND MODEL # HOP • High Gloss / Mat Nextel Black • Aesthetic long stand dedicated for SIB XL $129.00 • Cable pass-through • Versatile Polyfix system • Heavy Base for Stability • Height 347/8” (885mm) • Base (WxD) 95/8”x83/8” • Weight 11.5lbs (5.2kg) BOP STAND MODEL # BOP • High Gloss / Mat Nextel Black $79.00 • Aesthetic long stand dedicated for SIB XL • Cable pass-through
Recommended publications
  • California State University, Northridge a Digital
    CALIFORNIA STATE UNIVERSITY, NORTHRIDGE A DIGITAL LOUDSPEAKER EQUALIZATION TECHNIQUE A graduate project submitted in pmiial fulfillment of the requirements For the degree of Master of Science in Electrical Engineering By Colby J Buddelmeyer December, 2011 The project of Colby J Buddelmeyer is approved: Dr. Xiyi Hang Date Professor Benjamin F. Mallard Date Date California State University, Northridge 11 DEDICATION To my wife, Anna Pomerantz: Thank you for your support, encouragement, and patience. I could not have finished this journey without you. 111 ACKNOWLEDGEMENT I would like to thank Dr. Sean Olive, Allan Devantier, and the Harman International R & D Group for allowing me to use the HATS (Hannan Audio Test System) as part of my project. Their work has fmihered our understanding of listening and created tools to revolutionize speaker design. I also want to thank Tim Prenta, Vice President of Acoustics and Kevin Bailey, Director of Mechanical Engineering at Hannan Consumer for their support of my project. They allowed me tin1e to pursue my Masters and gave me access to the tools and resources used to build this project. Their support made this project possible and I am in their debt. Special thanks also to my project advisor Dr. Ichiro Hashimoto for his mentming, encouragement, and friendship. His teachings will greatly influence the course of my future endeavors. Much appreciation goes out to Dr. Xiyi Hang and Professor Benjamin Mallard for evaluating my project and being such great instructors. Thanks to Jolm Jackson for assisting me in taking measurements and providing guidance as to their meaning. Lastly, I wish to thank Brian Castro, Mark Glazer, James Hall, and Charles Sprinkle for sharing their knowledge of loudspeakers and DSP.
    [Show full text]
  • The Acoustic Design of Minimum Diffraction Coaxial Loudspeakers with Integrated Waveguides
    Audio Engineering Society Convention Paper Presented at the 142nd Convention 2017 May 20–23 Berlin, Germany This Convention paper was selected based on a submitted abstract and 750-word precis that have been peer reviewed by at least two qualified anonymous reviewers. The complete manuscript was not peer reviewed. This convention paper has been reproduced from the author's advance manuscript without editing, corrections, or consideration by the Review Board. The AES takes no responsibility for the contents. This paper is available in the AES E-Library, http://www.aes.org/e-lib. All rights reserved. Reproduction of this paper, or any portion thereof, is not permitted without direct permission from the Journal of the Audio Engineering Society. The Acoustic Design of Minimum Diffraction Coaxial Loudspeakers with Integrated Waveguides Aki Mäkivirta, Jussi Väisänen, Ilpo Martikainen, Thomas Lund, Siamäk Naghian Genelec Oy, Iisalmi, Finland Correspondence should be addressed to Aki Mäkivirta ([email protected]) ABSTRACT Complementary to precision microphones, creating an ideal point source monitoring speaker has long been considered the holy grail of loudspeaker design. Coaxial transducers unfortunately typically come with several design compromises, such as adding intermodulation distortion, giving rise to various sources of diffraction, and resulting in somewhat restricted maximum output performance or frequency response. In this paper, we review the history of coaxial transducer design, considerations for an ideal point source loudspeaker, discuss the performance of a minimum diffraction coaxial loudspeaker and describe novel designs where the bottlenecks of conventional coaxial transducers have been eliminated. In these, the coaxial element also forms an integral part of a compact, continuous waveguide, thereby further facilitating smooth off-axis dispersion.
    [Show full text]
  • Genelec AIW25 Active In-Wall Loudspeaker Operating Manual
    Operating Manual AIW25 Genelec AIW25 Active In-Wall Loudspeaker Genelec AIW25 Active In-Wall Loudspeaker The Genelec AIW25 Active In-Wall loud- Installation This results in a precise and stable sound speaker system consists of a two-way image. loudspeaker enclosure and a matched Genelec recommends that you use the ser- If the AIW25 loudspeakers are used in an remote amplifier module, RAM2. It has been vices of an authorized installation special- application where their capability for precise designed to the same rigorous standards as ist or other competent and experienced sound imaging is needed, such as the front Genelec’s high-performance HT series active installation company for the installation of channels of a Surround Sound system or a Home Theater loudspeakers. No other in- the AIW25 system. Ask your local Genelec Stereo system, we recommend that the loud- wall loudspeaker in this size class can match dealer for recommended installation compa- speakers are placed as far away from cor- the low distortion, neutrality and high sound nies in your region. ners or other walls and reflective surfaces as pressure capability of Genelec AIW25. The possible. The loudspeakers should be placed AIW25 can be used in the most demanding Matching loudspeakers and symmetrically in relation to the listening posi- applications, like the main L-C-R array of a amplifiers tion and there should be no obstructions Home Theater system, critical Stereo listen- Each AIW25 loudspeaker has been factory between the loudspeaker and the listener. ing or rear/side channels of a medium sized, calibrated for optimum performance with the This guarantees clear dialogue in films and a state-of-the-art Home Theater.
    [Show full text]
  • 11.8 Loudspeaker Enclosures 11-71
    11.8 Loudspeaker enclosures 11-71 11.8 Loudspeaker enclosures 11.8.1 Basics Often, cases guitar-amplifier and -speaker are mounted within the same enclosure (combo); alternatively, there is also the two-part piggy-back or stack design. From the multitude of sizes available on the market, Fig. 11.82 shows a small selection: predominantly, 10”- and 12”-speakers are found, occasionally also 15” (with 1” = 2.54 cm). The small combos almost always have a large opening in the rear while the larger enclosures are either of closed design or realized as ported box (bass-reflex). In the widest sense of the word, the enclosures open to the rear also represent a kind of bass-reflex system – albeit a very special one. Fig. 11.82: Loudspeaker enclosures; Membrane-diameters in inches The enclosure (or cabinet) makes a significant contribution to the sound generation. If it is airtight, it predominantly has the effect of an air-suspension to the membrane that increases the resonance frequency. Since this air-stiffness grows invers to the volume, a small enclosure would strongly increase the resonance frequency – it is presumably for this reason that small 5 2 cabinets mostly have an open back. The stiffness of air is sL = 1.4⋅10 Pa ⋅ S / V for adiabatic changes. In this formula, S is the effective membrane surface, and V is the net volume of the enclosure. For a 12”-speaker and a 50-litre-box, we calculate 9179 N/m – this approximately corresponds to the stiffness of the membrane. As an example: with such a mounting, the resonance frequency for a Celestion Blue would rise by 50%.
    [Show full text]
  • Mth-2.5/42Bt
    ElectroVoice® MTH-2.5/42BT Manifold Technology® Mid-bass/High-Fre­ quency Sound Reinforce­ ment System • Sonically improved lower midrange • 40° x 20° constant-directivity pattern • Smaller MT trapezoidal enclosure • Rotatable MB & HF horns • High acoustic output, low distortion • Manifold Technology® enables smaller and lighter loudspeaker arrays • MT systems with different coverage patterns and output capabilities may be mixed and matched • Unique rigging scheme for flexible array design and quick assembly SHOWN WITHOUT GRILL • Available without rigging hardware SPECIFICATIONS Third Harmonic, MTH-2.5/42BT is an active, two-way, horn­ Frequency Response (measured in far 200 Hz: 0.8% loaded, 40° x 20° constant-directivity system field, calculated to one meter on axis, 1,000 Hz: 1.3% with a trapezoidal enclosure, utilizing two high­ swept sine wave, one watt into mid-bass 3,000 Hz: 0.1% power mid-bass drivers in the mid-bass fre­ section, anechoic environment; see 10,000 Hz: 1 .4% quency band and two high-power compression Figure 1): Transducer Complement, drivers in the high-frequency band . Both the 150-20,000 Hz MB: Two DL 1OX 10-inch drivers, mid-bass and high-frequency horns may be Recommended Crossover Frequencies: 40° x 40° fiberglass horn rotated in the enclosure. This configuration 160 Hz, 1,600 Hz HF: Two DH1A variant compression results in remarkably high acoustic output from Efficiency, MB/HF: drivers; HP42S, 40° x 20° horn a small enclosure. The MTH-2.5/42BT may be 16/25% Impedance (see Figures 2 & 7), combined with other members of the MT-2B Long-Term Average Power-Handling Nominal, MB/HF: and MT-4B loudspeaker family.
    [Show full text]
  • Xlt41e-64 Two-Way Multi-Angle / Pa System with 60° X 40° Hf Horn
    XLT41E-64 TWO-WAY MULTI-ANGLE / PA SYSTEM WITH 60° X 40° HF HORN SPECIFICATIONS (See notes 1 and 2) Loudspeaker Type: 2-way, multi-angle / PA, bass ported Operating Range: 70 Hz - 18 kHz 70 Hz - 18 kHz (+/-5dB) Max Input (Passive): 200W continuous, 500W program 14.4 in. 40 volts RMS, 89 volts momentary peak Recommended Power Amp: 366 mm 420W to 600W @ 8 Ohms Max Inputs (Biamp): LF: (Same as for Passive mode) Recommended LF Power Amp: (Same as for Passive mode) HF: 50W continuous, 125W program 20 volts RMS, 45 volts momentary peak APPLICATIONS: Recommended HF Power Amp: 100W to 150W @ 8 Ohms • Theatres / Auditoria Sensitivity 1W/1m: 99 dB SPL (70 Hz - 18 kHz 1/3 octave bands) • Portable PA 97 dB SPL (250 Hz - 4 kHz speech range) • Houses of Worship Maximum Output: 122 dB SPL / 129 dB SPL (peak) • Clubs Nominal Impedance (passive): 8 Ohms • Bands Min Impedance: 5.2 Ohms @ 210 Hz Nominal Impedances (Biamp): LF: 8 Ohms, HF: 8 Ohms FEATURES: Nominal -6 dB Beamwidth: • 1" Titanium HF Driver 55° H (+9° / -8°, 2 kHz - 10 kHz) 40° V (+1° / -5°, 2 kHz - 10 kHz) • Switchable Passive / Biamp Modes Axial Q / DI: • 2 Position HF Level Switch 33 / 15.2, 2 kHz - 10 kHz • PowerSenseTM DDP Circuit with Front Indication Crossover Frequency: 2 kHz • Dual-position Floor Monitor or Upright PA Use Recommended Signal Processing: 60 Hz high pass filter Drivers: • Steel Handle and Steel Input Panel LF (1) 12", Ferrofluid-cooled • Choice of Black, White, or Unfinished Exterior HF (1) 1" exit, titanium diaphragm Driver Protection: PowerSense™ DDP DESCRIPTION Input Connection: (2) Neutrik NL4MP, (2) 1/4 in.jack The XLT41E is a small and versatile two-way full-range Controls: Passive / Biamp switch bass reflex loudspeaker system engineered for multiple 2 position HF level switch uses in club and performance public address.
    [Show full text]
  • Microphones and Loudspeakers
    A Tutorial on Acoustical Transducers: Microphones and Loudspeakers Robert C. Maher Montana State University EELE 217 Science of Sound Spring 2012 Test Sound Outline • Introduction: What is sound? • Microphones – Principles – General types – Sensitivity versus Frequency and Direction • Loudspeakers – Principles – Enclosures • Conclusion 2 Transduction • Transduction means converting energy from one form to another • Acoustic transduction generally means converting sound energy into an electrical signal, or an electrical signal into sound • Microphones and loudspeakers are acoustic transducers 3 Acoustics and Psychoacoustics Mechanical Electrical to to Acoustical Acoustical Psychological Acoustical Mechanical propagation to (reflection, to diffraction, Mechanical Electrical absorption, etc.) (nerve signals) 4 What is Sound? • Vibration of air particles • A rapid fluctuation in air pressure above and below the normal atmospheric pressure • A wave phenomenon: we can observe the fluctuation as a function of time and as a function of spatial position 5 Sound (cont.) • Sound waves propagate through the air at approximately 343 meters per second – Or 1125 feet per second – Or 4.7 seconds per mile ≈ 5 seconds per mile – Or 13.5 inches per millisecond ≈ 1 foot per ms • The speed of sound (c) varies as the square root of absolute temperature – Slower when cold, faster when hot – Ex: 331 m/s at 32ºF, 353 m/s at 100ºF 6 Sound (cont.) • Sound waves have alternating high and low pressure phases • Pure tones (sine waves) go from maximum pressure to minimum pressure and back to maximum pressure. This is one cycle or one waveform period (T). T 7 Wavelength and Frequency • If we know the waveform period and the speed of sound, we can compute how far the sound wave travels during one cycle.
    [Show full text]
  • Xlt41 Two-Way Multi-Angle / Pa System with 90° X 40° Hf Horn
    XLT41 TWO-WAY MULTI-ANGLE / PA SYSTEM WITH 90° X 40° HF HORN SPECIFICATIONS (See notes 1 and 2) Loudspeaker Type: 2-way, multi-angle / PA, bass ported Operating Range: 70 Hz - 18 kHz, 70 Hz - 18 kHz (+/-5dB) Max Input (Passive): 200W continuous, 500W program 40 volts RMS, 89 volts momentary peak Recommended Power Amp: 420W to 600W @ 8 Ohms 14.9 in. Max Inputs (Biamp): 379 mm LF: (Same as for Passive mode) Recommended LF Power Amp: (Same as for Passive mode) HF: 50W continuous, 125W program 20 volts RMS, 45 volts momentary peak Recommended HF Power Amp: 100W to 150W @ 8 Ohms Sensitivity 1W/1m: 97 dB SPL (70 Hz - 18 kHz 1/3 octave bands) 96 dB SPL (250 Hz - 4 kHz speech range) APPLICATIONS: Maximum Output: 120 dB SPL / 127 dB SPL (peak) Nominal Impedance (passive): 8 Ohms • Theatres / Auditoria Min Impedance: 5.2 Ohms @ 210 Hz • Portable PA Nominal Impedances (Biamp): LF: 8 Ohms, HF: 8 Ohms Nominal -6 dB Beamwidth: • Houses of Worship 80° H (+6° / -18°, 2 kHz - 10 kHz) • Clubs 35° V (+8° / -3°, 2 kHz - 10 kHz) • Bands Axial Q / DI: 24.4 / 13.9, 2 kHz - 10 kHz Crossover Frequency: 2 kHz Recommended Signal Processing: 60 Hz high pass filter FEATURES: Drivers: LF (1) 12", Ferrofluid-cooled • Dual-position Floor Monitor or Upright PA Use HF (1) 1" exit, titanium diaphragm • 1" Titanium HF Driver Driver Protection: PowerSense™ DDP Input Connection: (2) Neutrik NL4MP, (2) 1/4 in. jack • Switchable Passive / Biamp Modes Controls: Passive / Biamp switch, 2 position HF level switch • 2 Position HF Level Switch Enclosure: Black carpet covered particle
    [Show full text]
  • December, 1973 TABLE of CONTENTS
    N,78/ A STUDY OF THE OPERATION AND CONSTRUCTION OF SPEAKER SYSTEMS/ENCLOSURES THESIS Presented to the Graduate Council of the North Texas State University in Partial Fulfillment of the Requirements For the Degree of MASTER OF SCIENCE By Harry Steven Allen, B. S. Denton, Texas December, 1973 TABLE OF CONTENTS Page LIST OF ILLUSTRATIONS. .. v Chapter I. INTRODUCTION . Purposes of Study Basic Assumptions Limitations of the Study Definition of Terms Need for the Study Recent and Related Studies Method of Procedure Organization of Study II. THE LOUDSPEAKER*. .*.00. .. *... 11 Magnetic Assembly Voice Coil Diaphragm Loudspeaker Suspension Rim Suspension The Frame Mechanics of Design Acoustic Theory Loudspeaker Efficiency Loudspeaker Impedance Crossover Networks III. FINITE, INFINITE AND ACOUSTIC SUSPENSION BAFFLE . 32 Finite Baffle Infinite Baffles Sealed Enclosures Acoustic Suspension Speaker System Efficiency Considerations Construction Details IV. PHASE INVERTER OR BASS REFLEX ENCLOSURE - . - - - * 45 Determining Port Size Tuning the Enclosure Port Ducted Port Damping the Ducted Port Construction Considerations iii Chapter Page Mounting the Loudspeaker Summary V. HORN TYPE ENCLOSURES - - - . - - - . *.. 58 Acoustic Theory of Operation Horn Shapes and Cutoff Frequency Design Calculations Construction Considerations Phasing of Multi-speaker Horn Systems Bracing Damping Advantages and Disadvantages of Horn Systems VI. ENCLOSURE CONSTRUCTION DETAILS . 74 Construction Material and Techniques Bracing and Joinery Damping Techniques Duct and Port Calculations Mounting Hardware and Wiring Terminals Electrical Wiring Considerations Grille Assembly Testing Speaker System The Room As Part of The Acoustic Circuit Sources of Acoustic Data VIII. SUMMARY FINDINGS, CONCLUSIONS AND RECOMMENDATIONS ... .. , ......... 94 Summary Findings Conclusions Recommendations APPENDICES . * . , * * * * . 99 BIBLIOGRAPHY . 117 iv LIST OF ILLUSTRATIONS Figure Page 1.
    [Show full text]
  • AIW26B Operating Manual Genelec AIW26B Operating Manual
    AIW26B Operating Manual Genelec AIW26B Operating Manual Introduction Installation The Genelec AIW26B Active In-wall Genelec recommends that you use the loudspeaker system consists of a bass services of an authorized installation reflex type two-way loudspeaker and a specialist or other competent and matched remote amplifier module, RAM1. experienced installation company for the It The AIW26B can be used in the most installation of the AIW26B system. Ask your demanding applications, like the main local Genelec dealer for recommended L-C-R array of a Home Theater system, installation companies in your region. critical Stereo listening or rear/side channels of a large, state-of-the-art Home Matching loudspeakers Theater. and amplifiers Each AIW26B loudspeaker unit has been Figure 1. Symmetrical L-C-R Unpacking factory calibrated for optimum performance loudspeaker placement A Genelec AIW26B set includes the items with the RAM1 amplifier it is shipped listed below. Check that nothing is missing with. Never mix these matched amplifier- or damaged during transport and delivery. If loudspeaker systems in the installation there is a problem with the product, contact process. The matching units are marked with conventional loudspeakers. A secondary your local Genelec dealer. the same ID number on the reflex port of the function of the DCW is to reduce the off-axis AIW26B enclosure and the top panel of the radiated sound energy, thereby minimizing • AIW26B loudspeaker unit. RAM1. the reflections from the side walls, floor and • Grille ceiling. This results in a precise and stable • AIW26B cardboard cut-out template Loudspeaker placement sound image • RAM1 amplifier unit Genelec AIW26B loudspeakers are If the AIW26B loudspeakers are used in an • Mains power cable equipped with Genelec’s proprietary application where their capability for precise • Plexiglass cover for the control Directivity Control Waveguide (DCW).
    [Show full text]
  • Loudspeaker and Headphone Handbook, Third Edition
    111 111 0 111 0 0111 0 0 111 111 Loudspeaker and 111 Headphone Handbook 0 111 0 0111 0 0 111 111 This Page Intentionally Left Blank 0 0111 0111 0 0 1 Contents iii 111 Loudspeaker and Headphone 0 Handbook Third Edition Edited by John Borwick 0111 With specialist contributors 0111 0 0 Focal Press 111 OXFORD AUCKLAND BOSTON JOHANNESBURG MELBOURNE NEW DELHI iv Contents 111 Focal Press An imprint of Butterworth-Heinemann Linacre House, Jordan Hill, Oxford OX2 8DP 225 Wildwood Avenue, Woburn, MA 01801–2041 A division of Reed Educational and Professional Publishing Ltd A member of the Reed Elsevier plc group First published 1988 0 Second edition 1994 Reprinted 1997, 1998 Third edition 2001 © Reed Educational and Professional Publishing Ltd 2001 All rights reserved. No part of this publication may be reproduced in any material form (including photocopying or storing in any medium by electronic means and whether or not transiently or incidentally to some other use of this publication) without the written permission of the copyright holder except in accordance with the provisions of the 0111 Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London, England W1P 0LP. Applications for the copyright holder’s written permission to reproduce any part of this publication should be addressed to the publishers British Library Cataloguing in Publication Data Loudspeaker and headphone handbook. – 3rd ed. 1. Headphones – Handbooks, manuals, etc. 2. Loudspeakers – Handbooks, manuals, etc. I. Borwick, John 0111 621.38284 Library of Congress Cataloguing in Publication Data Loudspeaker and headphone handbook/edited by John Borwick, with specialist contributors – 3rd ed.
    [Show full text]
  • Engineering the Future of Loudspeaker Design Graphical Solution of Electrical Filters Increasing Sensitivity of Fm Tuners Multip
    DECEMBER, 1956 50¢ ENGINEERING MUSIC SOUND REPRODUCTION The problem of building stable transistor amplifiers hinges on the stabilization of the individual stages. See page 47 for the details. Build this concrete.block speaker enclosure which is put to- gether like building blocks and which may be taken apart and reassembled easily in another location. See page 21. THE FUTURE OF LOUDSPEAKER DESIGN GRAPHICAL SOLUTION OF ELECTRICAL FILTERS INCREASING SENSITIVITY OF FM TUNERS MULTIPLE TAPE COPYING www.americanradiohistory.com SKITCH ...on his Presto Turntable "MY CUSTOM HI -FI OUTFIT is as important to me as my Visit the Hi -Ft Sowed .Salon nearest you to verify Mr. Mercedes -Benz sports car," says Skitch Henderson, Henderson's comments. Whether you currently own a con- pianist, TV musical director and audiophile. "That's ventional "one- piece" phonograph -or custom components- we be with the difference you'll hear why I chose a PRESTO turntable to spin my records. In think you'll gratified you records through custom hi -fi components my many years working with radio and recording when play your teamed with a PRESTO turntable. Write for free brochure, studios I've never seen engineers play back records on "Skitch, on Pitch," to Dept. AX, Presto Recording Corpora- anything but a turntable -and it's usually a PRESTO tion, P.O. Box 500, Paramus, N. J. turntable. MODEL T -2 12" "Promenade" turntable "My own experience backs up the conclusion of the en- (33'h and 45) four pole motor, $49.50 MODEL T-18 12" "'Pirouette" turntable gineers: for absolutely constant turntable speed with no 031/4,45 and 78) four pole motor, annoying 'Wow' and 'Flutter,' especially at critical with Hysteresis motor (Model T-18H), ,131.00 33'%s and 45 rpm speeds, for complete elimination of MODEL T -68 16" "Pirouette" turntable motor noise and 'rumble,' I've found nothing equals a (33%, 45 and 78) four pole motor, i.
    [Show full text]