DOCSLIB.ORG

X3 X4 X2 X1 X5

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
X3 X4 X2 X1 X5 Multisplit system heat pump Inverter MultiSplit System with capacity from 5 to 12kW MKM Wall mounted unit with air ioniser standard R410A x1x1 NEW DESIGN! MKM_WS x2x2 Controller x3x3 MKM_W Seasonal Energy Efficiency See Technical data x4x4 MKM_F x5x5 Regulation (EU) N. 206/2012 Delegated Regulation (EU) N. 626/2011 = MKM_W MKM_WS MKM_C MKM_CS Wired panel MKM_D Controller MKM_F MKM_C MKM_CS MKM_D MKM Characteristics Dualsplit: • Floor Ceiling (Wall or ceiling mounted) • Microprocessor control • External units MKM42-52-72 connected to 1 with remote controller and wired panel: • Possibility to set the ambient temperature sen- or 2 internal units MKM25F - 35F - 50F - 70F sor in the intake of the internal unit or in the Trisplit: • Ducted (Horizontal installation) wired panel (MKM_C, MKM_CS, MKM_D, • External unit MKM73 connected to 2 or 3 with remote controller and wired panel: MKM_F) internal units MKM25D - 35D - 50D - 60D - 70D • Timer for programming switch on and/or off Quadrisplit: Nominal head 10Pa (450m3/h) • Operating modes: Cooling, Heating, • External units MKM84 and MKM104 con- • Refrigerant R410A Dehumidifi cation, Automatic or Ventilation nected to 2, 3 or 4 internal units • DC Inverter rotary compressor for higher Only Pentasplit: energy savings and for optimised ambient • Auto-diagnostic function • External unit MKM125 connected to 3, 4 or 5 conditions • Air filter easily removed and cleaned internal units • Internal unit with three speed fan • Efficient defrost control Internal unit choices from: • External unit multi-speed single fan • Condensate discharge pump standard in ver- • Wall (Wall mounted) • Rotary compressor with variable speed sions MKM_CS, MKM_C and MKM_D with remote controller: • Horizontally adjustable air discharge louvres • Flare type refrigerant connections MKM 20W - 25W - 35W - 50W (MKM_W, MKM_WS, MKM_C, MKM_CS, • Multi-line refrigerant connection system, MKM 20WS - 25WS - 35WS - 50WS MKM_F) where each internal unit is connected to the • Cassette 600x600 (False ceiling mounted) • Motorised deflector louvres for vertical external unit through dedicated refrigerant with remote controller and wired panel: adjustment of discharge air (MKM_W, MKM_ lines MKM35CS - 50CS WS, MKM_C, MKM_CS, MKM_F) • Total refrigerant line length: (it is required to connect with accessory • Air ioniser standard for wall mounted units up to 20m for the external units MKM52 and MKMGL40S) (MKM_W, MKM_WS) MKM72 • Cassette 840x840 (False ceiling mounted) • Extremely low noise operation up to 70m for the external units MKM73, with remote controller and wired panel: • Infrared remote controller with liquid crystal MKM84 and MKM104 MKM35C - 50C - 70C display to control all functions up to 80m for the external unit MKM125 (it is required to connect with accessory • Wired panel with liquid crystal display and MKMGL40) Soft Touch buttons to control all functions (MKM_C, MKM_CS, MKM_D, MKM_F) Accessories • MKMGL40S: (600x600) motorised. Fitted with infrared receiver and and MKM_CS are shipped without. MKMGL40: (840x840) emergency operation button. Supply and return air grille. Supply grilles are Is a required accessory as the units MKM_C Mod. MKM35CS MKM50CS MKM35C MKM50C MKM70C MKMGL40S ✔ ✔ MKMGL40 ✔ ✔ ✔ Combination of internal units permitted internal unit MKM_C - MKM_CS - MKM_D - MKM_F - MKM_W - MKM_WS: Dualsplit: possible installation of 1 or 2 internal units External unit Dualsplit MKM42 (14kBtu/h) External unit Dualsplit MKM52 (18kBtu/h) External unit Dualsplit MKM72 (24kBtu/h) Totale (k) Unità A Unità B Totale (k) Unità A Unità B Totale (k) Unità A Unità B 7 20 (7k) - 7 20 (7k) - 14 20 (7k) 20 (7k) 9 25 (9k) - 9 25 (9k) - 16 20 (7k) 25 (9k) 12 35 (12k) - 12 35 (12k) - 18 25 (9k) 25 (9k) 14 20 (7k) 20 (7k) 14 20 (7k) 20 (7k) 19 20 (7k) 35 (12k) 16 20 (7k) 25 (9k) 16 20 (7k) 25 (9k) 21 25 (9k) 35 (12k) 18 25 (9k) 25 (9k) 18 25 (9k) 25 (9k) 24 35 (12k) 35 (12k) 19 20 (7k) 35 (12k) 19 20 (7k) 35 (12k) 25 20 (7k) 50 (18k) 21 25 (9k) 35 (12k) 21 25 (9k) 35 (12k) 27 25 (9k) 50 (18k) 30 35 (12k) 50 (18k) Trisplit: it is required to install at least 2 internal units for correct system operation External unit Trisplit MKM73 (24k) Total (k) Unit A Unit B Unit C Total (k) Unit A Unit B Unit C 14 20 (7k) 20 (7k) - 25 20 (7k) 25 (9k) 25 (9k) 16 20 (7k) 25 (9k) - 26 20 (7k) 20 (7k) 35 (12k) 18 25 (9k) 25 (9k) - 27 25 (9k) 25 (9k) 25 (9k) 19 20 (7k) 35 (12k) - 28 20 (7k) 25 (9k) 35 (12k) 21 25 (9k) 35 (12k) - 30 25 (9k) 25 (9k) 35 (12k) 24 35 (12k) 35 (12k) - 31 20 (7k) 35 (12k) 35 (12k) 25 20 (7k) 50 (18k) - 32 20 (7k) 20 (7k) 50 (18k) 27 25 (9k) 50 (18k) - 33 25 (9k) 35 (12k) 35 (12k) 30 35 (12k) 50 (18k) - 34 20 (7k) 25 (9k) 50 (18k) 36 50 (18k) 50 (18k) - 36 25 (9k) 25 (9k) 50 (18k) 21 20 (7k) 20 (7k) 20 (7k) 36 35 (12k) 35 (12k) 35 (12k) 23 20 (7k) 20 (7k) 25 (9k) Quadrisplit: it is required to install at least 2 internal units for correct system operation External unit Quadrisplit MKM84 (28k) Total (k) Unit A Unit B Unit C Unit D Total (k) Unit A Unit B Unit C Unit D 14 20 (7k) 20 (7k) - - 34 20 (7k) 25 (9k) 50 (18k) - 16 20 (7k) (25 (9k) - - 36 25 (9k) 25 (9k) 50 (18k) - 18 25 (9k) 25 (9k) - - 36 35 (12k) 35 (12k) 35 (12k) - 19 20 (7k) 35 (12k) - - 37 20 (7k) 35 (12k) 50 (18k) - 21 25 (9k) 35 (12k) - - 39 25 (9k) 35 (12k) 50 (18k) - 24 35 (12k) 35 (12k) - - 42 35 (12k) 35 (12k) 50 (18k) - 25 20 (7k) 50 (18k) - - 28 20 (7k) 20 (7k) 20 (7k) 20 (7k) 27 25 (9k) 50 (18k) - - 30 20 (7k) 20 (7k) 20 (7k) 25 (9k) 30 35 (12k) 50 (18k) - - 32 20 (7k) 20 (7k) 25 (9k) 25 (9k) 36 50 (18k) 50 (18k) - - 33 20 (7k) 20 (7k) 20 (7k) 35 (12k) 21 20 (7k) 20 (7k) 20 (7k) - 34 20 (7k) 25 (9k) 25 (9k) 25 (9k) 23 20 (7k) 20 (7k) 25 (9k) - 35 20 (7k) 20 (7k) 25 (9k) 35 (12k) 25 20 (7k) 25 (9k) 25 (9k) - 36 25 (9k) 25 (9k) 25 (9k) 25 (9k) 26 20 (7k) 20 (7k) 35 (12k) - 37 20 (7k) 25 (9k) 25 (9k) 35 (12k) 27 25 (9k) 25 (9k) 25 (9k) - 38 20 (7k) 20 (7k) 35 (12k) 35 (12k) 28 20 (7k) 25 (9k) 35 (12k) - 39 20 (7k) 20 (7k) 20 (7k) 50 (18k) 30 25 (9k) 25 (9k) 35 (12k) - 39 25 (9k) 25 (9k) 25 (9k) 35 (12k) 31 20 (7k) 35 (12k) 35 (12k) - 40 20 (7k) 25 (9k) 35 (12k) 35 (12k) 32 20 (7k) 20 (7k) 50 (18k) - 41 20 (7k) 20 (7k) 25 (9k) 50 (18k) 33 25 (9k) 35 (12k) 35 (12k) - 42 25 (9k) 25 (9k) 35 (12k) 35 (12k) External unit Quadrisplit MKM104 (36k) Total connectable power of the external unit between 50% and 150% of its nominal power (36k) Pentasplit: it is required to install at least 3 internal units for correct system operation External unit Pentasplit MKM125 (42k) Total connectable power of the external unit between 50% and 150% of its nominal power (42k) Technical data External Unit MKM42 MKM52 MKM72 MKM73 MKM84 MKM104 MKM125 4100 5000 7000 7100 8000 10000 12100 Cooling capacity W (min) 2050 2050 2200 2200 2200 2100 3500 (max) 4500 6200 10000 10000 10000 11000 13600 1200 1550 2460 2250 2490 3750 3590 Power input W (min) 500 500 650 650 650 700 1300 (max) 1500 2550 4550 4550 4550 3900 4900 SEER 5,6 5,6 5,8 5,1 5,1 5,1 - Energy efficiency class A+ A+ AAAA - 4500 5600 7700 8500 9300 11000 13000 Heating capacity W (min) 2500 2500 3600 3600 2880 2600 4500 (max) 5000 6650 11000 11000 11000 13000 14000 1150 1550 2560 2350 2580 3800 3540 Power input W (min) 580 580 980 980 980 1300 1300 (max) 1500 2700 3950 3950 3950 3900 4400 SCOP 3,8 3,8 3,8 3,8 3,8 3,8 - Energy efficiency class A A AAAA - Power input nominal* W 1500 2700 4550 4550 4550 4880 5300 Compressor Rotary DC Inverter Sound pressure dB(A) 55 57 58 58 59 54 54 Max number of connected units n. 2 2 2 3445 Power supply 230V ~ 50Hz Sound pressure measured at 1m distance from front in semi-anechoic chamber * In accordance with Standard EN-60335 Performances in accordance with Standards EN-14511 and EN-14825 Cooling: Heating: - Ambient air temperature 27°C db ; 19°C wb - Ambient air temperature 20°C - External air temperature 35°C - External air temperature 7°C db ; 6°C wb - Maximum speed - Maximum speed - Refrigerant line length 5m - Refrigerant line length 5m EXTERNAL UNIT MKM72 MKM73 MKM84 MKM104 MKM125 with adaptor 1 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 12,7 (1/2") 6,35 (1/4") ➔ 9,52 (3/8") 6,35 (1/4") ➔ 9,52 (3/8") with adaptor 2 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 6,35 (1/4") 6,35 (1/4") ➔ 9,52 (3/8") with adaptor 3 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 6,35 (1/4") with adaptor 4 9,52 (3/8") ➔ 12,7 (1/2") 9,52 (3/8") ➔ 12,7 (1/2") with adaptor 5 12,7 (1/2") ➔ 9,52 (3/8") 12,7 (1/2") ➔ 9,52 (3/8") with adaptor 6 12,7 (1/2") ➔ 15,9 (5/8") 12,7 (1/2") ➔ 9,52 (3/8") with adaptor 7 15,9 (5/8") ➔ 9,52 (3/8") 12,7 (1/2") ➔ 15,9 (5/8") with adaptor 8 12,7 (1/2") ➔ 15,9 (5/8") with adaptor 9 15,9 (5/8") ➔ 9,52 (3/8") with adaptor 10 15,9 (5/8") ➔ 12,7 (1/2") INTERNAL UNIT - WALL Model MKM20W MKM25W MKM35W MKM50W Liquid connection / LINE 6,35 (1/4") 6,35 (1/4") 6,35 (1/4") 6,35 (1/4") Gas connection / LINE 9,52 (3/8") 9,52 (3/8") 9,52 (3/8") 12,7 (1/2") Model MKM20WS MKM25WS MKM35WS MKM50WS Liquid connection / LINE 6,35 (1/4") 6,35 (1/4") 6,35 (1/4") 6,35 (1/4") Gas connection / LINE 9,52 (3/8") 9,52 (3/8") 9,52 (3/8") 12,7 (1/2") INTERNAL UNIT - DUCTED Model MKM25D MKM35D MKM50D MKM60D MKM70D Liquid connection / LINE 6,35 (1/4") 6,35 (1/4") 6,35 (1/4") 9,52 (3/8") 9,52 (3/8") Gas connection / LINE 9,52 (3/8") 9,52 (3/8") 12,7 (1/2") 15,9 (5/8") 15,9 (5/8") INTERNAL UNIT - CASSETTE 600x600 Model MKM35CS MKM50CS Liquid connection / LINE 6,35 (1/4") 6,35 (1/4") Gas connection / LINE 9,52 (3/8") 12,7 (1/2") INTERNAL UNIT - CASSETTE 840x840 Model MKM35C MKM50C MKM70C
Load more

Recommended publications
  • Kunskapssammanställning 2019:5 Airborne Dust Removal Using Mobile Air Cleaner in the Construction Sector
    Kunskapssammanställning 2019:5 Airborne Dust Removal using Mobile Air Cleaners in the Construction Sector 1 2 Kunskapssammanställning 2019:5 Airborne Dust Removal using Mobile Air Cleaners in the Construction Sector Authors of the report Joakim Pagels Malin Alsved Vilhelm Malmborg Yuliya Omelekhina Aneta Wierzbicka Mats Bohgard All authors from Ergonomics & Aerosol Technology, Lund University, Faculty of Engineering 3 Advisory Group Åsa Ek: Ergonomics & Aerosol Technology, LU. Expert in safety culture and safety management in the working environment. Tobias Eriksson: Research Insitute of Sweden (RiSE), Borås. Expert on standard testing of air cleaners with a large national network in the field. Maria Hedmer: Occupational & Environmental Medicine, LU. Long experience of research and clinical work involving exposure measurements at workplaces. Christof Asbach: IUTA, Germany. International advisor to the project and an expert on filtration and aerosol electrical properties. ISSN: 1650-3717 Omslagsfoto: Hans Alm Grafisk formgivning: Matador kommunikation 4 Innehåll List of Abbreviations ............................................................................7 Förord ................................................................................................8 Svensk sammanfattning ........................................................................9 Abstract ............................................................................................12 1. Introduction ................................................................................13
    [Show full text]
  • Console & Mobile
    DEHUMIDIFIERS CONSOLE & MOBILE 2YEARS DEHUMIDIFIERS THE SOLUTION FOR YOUR COMFORT ! procopi.com CLIMEXEL® , ANOTHER WORD FOR THERMAL COMFORT! A dehumidifier is indispensable for every indoor pool. Dehumidifiers may be used to control hygrometry (level of humidity in the air) and may also, as an option, be used to heat the room, guaranteeing the comfort of bathers and sanitary cleanliness of the installation. WHAT IS A DEHUMIDIFIER? A dehumidifier is a device that draws humid air from the room over a cold evaporator to cool the air to below dew point. The air returned is fresh and dry. The air may be heated before being returned to the room depending on the season. MOBILE DEHUMIDIFIER 51 cm 23 cm 30 cm CLIMEXEL® DEHUMIDIFIERS DPA 20E This mobile, compact dehumidifier is ideal for small humid rooms (kitchens, bathrooms, etc.) or rooms equipped with a spa. Dehumidifies, dries and cleans air, (Ioniser 24 hour timer option; TiO) Digital control, LED Explosion proof condenser Automatic defrosting Activated charcoal filter Antibacterial collection tank TECHNICAL DATA Model DPA 20E Dehumidification capacity (L/day) at 30°C, 80% 230V/50Hz Power supply 370 Air volume (M2/h): 150 Electrical consumption 470 Watts Fan speed 2 Collection tank volume 3.5L Compressor Alternating Refrigerant gas R-134a Dimensions ( LxWxH mm) 230 X 300 X 510 Weight (Kg) 13 Certification CF Data valid under the following operating conditions - ambient air temperature 30°C, relative humidity 90%. procopi.com Heated dry air Condenser Turbine Evaporator Operating principal. Humid air This product lowers the relative humidity in a room by taking in air Motor and drawing it over a cold fin radiator (the evaporator) stripping it of moisture.
    [Show full text]
  • Providing Clean Air for Your Clients and Employees with Medical-Grade Precision
    SAFE AIR SPACES Providing clean air for your clients and employees with medical-grade precision. air8.tech Clean air has never been more important Fine particle (PM2,5) Size in microns 2,5 to 0,1 As a result of the current environmental conditions, we inhale suspended and invisible microparticles Aerosol every time we breathe. The elevated level of air Nano particle pollution inevitably raises the amount of chemical, Size in microns < 0,1 physical and biological pollutants inside buildings. Bacteria Smell Smoke How do these invisible pollutants behave in a Fine particles can linger closed environment? in the air before reaching Virus Chemical the ground. (incl. Coronavirus) Substances Nano particles can travel up to 10 metres and stay suspended in the air for hours. Coarse particle (PM10) Size in microns > 2,5 Pollen Dust Mold Heavier particles fall to the ground within a 2 metre distance. What can be done to get 01 Natural ventilation is a reference standard: it is the easiest way to clean air? renew the air in the indoor spaces. Minimising the risk of Covid-19 transmission, respiratory symptoms and uncomfortable allergies Implementation of powerful 02 during and after Covid will give a peace of mind to filtration technologies means the people you care about. getting safe and clean air. To enhance their confidence, you can undertake certain measures to reach a maximum rate of clean air. Pre-filtration Carbon Cold HEPA UV-GI light Ioniser filtration Catalyst filtration Delivering clean air can be easier than you think. Apply the gold safety standard for your sector Is your business all about people – a place to meet, spend time, shop, socialise? If the answer Enhance your employee’s and is yes, you need to make sure you provide healthy client’s confidence and get environments where everyone feels comfortable and safe.
    [Show full text]
  • Purify Your Indoor Air from Germs, Allergens, Mould Spores, Odour, Dust and Many Other Harmful Pollutants Table of Contents
    Innovative Devices for a Healthy Life Purify your indoor air from germs, allergens, mould spores, odour, dust and many other harmful pollutants Table of contents • About Heaven Fresh ..........................................2 • Indoor air pollution – Fact or Myth? ...............................3 • Indoor air pollution Awareness ..................................4 • The Right Solutions ...........................................5 • Multi-Technology Units ........................................8 • NaturoPure™ HF 380 Intelligent Air Purifier .........................8 • NaturoPure™ HF 310A Series Air Purifier ..........................9 • NaturoPure™ HF 300 Air Purifier ................................10 • NaturoPure™ HF 280 Air Purifier ................................11 • Ionic Air Purification and Household Units ........................12 - HF 210UV Ionic Air Purifier ................................12 - HF 200 Ionic Air Purifier ..................................13 - HF 707 Digital Ultrasonic Humidifier with Negative Ions .........14 - HF 708 Ultrasonic Cool Mist Humidifier ......................15 - HF 76 Travel Ultrasonic Cool Mist Humidifier ..................16 - HF 501 Aroma Luxury Showerhead .........................17 - AqraCharger AK-900 Water Ionizer & Purification System ........18 - HF 20 Ionic Air Purifier ...................................19 - HF 86 Ionic Air Purifier ...................................19 - HF 10 Ionic Air Purifier ...................................19 - HF 60 Ionic Air Purifier ...................................20
    [Show full text]
  • User Manual AG-WT10 Indoor Unit Air/Air Heat Pump
    User manual AG-WT10 Indoor unit air/air heat pump UHB GB 1516-1 331557 Table of Contents 1 Important information 3 Installation data 3 Safety information 4 Serial number 5 AG-WT10 – an excellent choice 6 Safety instructions 7 Recovery 8 2 Design 10 3 Remote control 12 Before use 12 Overview 14 Function without remote control 16 4 Function modes 17 Cooling 17 Heating 18 Automatic mode heat/cooling 19 Dehumidification 21 Ventilation 22 Function in the event of power cut 22 5 Operating program 23 Air ioniser 23 Night program/energy saving 23 High power-program 24 iFEEL/iFEEL C 25 6 Fan and air flow setting 26 Selecting fan speed 26 Airflow control 27 7 Clock and timer 29 Setting the clock 29 Setting the timer 29 Timer 1 hour 30 Table of Contents | AG-WT10 1 Vacation timer 31 8 Care and maintenance 32 Regular checks 32 Housing and grille 32 Air filter 33 Advice for maximum comfort and lowest energy consumption 35 9 Disturbances in comfort 36 Troubleshooting 36 Fault codes 38 Index 40 2 Chapter | AG-WT10 1 Important information Installation data Indoor unit AG-WT10 Model designation Serial number (S/N) Installation date Installer Outdoor unit AG-AA10 Model designation Serial number (S/N) Installation date Installer Serial number must always be given Certification that the installation is carried out according to instructions in NIBE's installer manual and applicable regulations. Date __________________ Signed _________________________ Chapter 1 | Important information AG-WT10 3 Safety information This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
    [Show full text]
  • Split System and VRF Systems
    Split System and VRF systems Year 2014 The Aermec philosophy A complete range, capable of resolving every air conditioning problem: this is Aermec for room conditioners. Completeness not only for models but with options and possibilities: cooling only andhe- at pump versions; environmentally friendly refrigerants; advanced technology, such as inverters which allow optimisation of performance in relation to temperature setpoints at all times and to obtain significant energy savings; installation versatility, to solve every space problem in the best way. Aermec is a business leader in the Italian and European air conditioning market. Created in 1961 it has carried out a primary role in the distribution and in creative ideas in air conditioning, building its development with a vast range of efficient and reliable products and a large number of services, in support of every requirement of designers,installers, architects and independent users. Aermec: the ideal climate always and everywhere In cooling only or heat pump versions the Aermec air conditioners, dedicated to the residential and light commercial sector, ensure the ideal climate all year round. Floor, wall, or ceiling mounted, they resolve every problem of space and installation. Mono or Multi-split, and available in variable refrigerant flow systems (VRF), they allow the solution of every problem and the satisfaction of every requirement in all types of dwelling, in historical and valuable buildings, and in offices. The success numbers 600 employees 12,900 m2 of factories 56 exclusive distributors in Europe and the Mediterranean 6 distributors in France, Germany, England, Poland, Spain and the Netherlands 78 technical assistance service centres in Italy Split System and VRF system Guide This document offers and overall view of the Aermec range for residential and commercial applications.
    [Show full text]
  • Bonaire Pinnacle™ Evaporative Cooling
    Brisbane Office Office Locations 2/22 Gardens Drive Willawong Qld 4110 07 3712 4300 Sydney Office Unit 17, 1 Rachael Close Slough Business Park Silverwater NSW 2128 02 9735 7000 A Quantum Dubbo Rogers Industries Leap Forward 6 Richard Ryan Place, Dubbo NSW 2830 02 6882 2733 in Cooling Leeton 9-11 Mckay Avenue Leeton NSW 2705 02 6953 6444 Technology Perth office Head Office Canberra Office 32 Walters Way 26 Nylex Avenue 3/1 Dairy Road, Fyshwick, Forrestfield WA 6058 Salisbury South Australia 5108 ACT 2609 02 6239 3400 08 9454 1010 08 8307 5100 Melbourne Office 2/444-446 South Gippsland Highway, Dandenong South Victoria 3175 03 8795 2400 bonaire.com.au BONAIRE® A CLIMATE TECHNOLOGIES BRAND ABN 13 001 418 042 Your nearest Bonaire stockist is:- In the interest of continued product improvement, Bonaire reserves the right to alter specifications without notice E & OE. Colours represented are as accurate as the printing process will allow. Images used, are for illustration purposes only. For further information on warranty terms and conditions please refer to Bonaire’s warranty information booklet. Domestic warranty only. Unit warranty for commercial applications varies depending on model. BON781-2 - November 2015 Introducing the Bonaire® Pinnacle™ The Pinnacle in Evaporative Cooling Bonaire continually searches the world to bring you’re the latest in evaporative cooling technology. The Bonaire Pinnacle is a quantum leap forward in evaporative cooling technology providing you with the ultimate in efficient cooling that operates at considerably less running costs than standard coolers and includes some of the most advanced operational features of evaporative coolers today.
    [Show full text]
  • Bonaire Integra Evaporative Cooling
    Evaporative Air Conditioning Product Range What is ducted evaporative cooling and how does it work? Built for Australian conditions Ducted evaporative cooling is a whole of home solution that allows you to cool the entire Bonaire coolers have been designed and manufactured to provide effective and efficient cooling to house using just one system. suit Australia’s harsh temperature extremes. The outdoor unit is usually located on the roof of the home and installed on a dropper duct. Cool air is drawn from outside, passed though moistened The quality, durability, and reliability of the filter pads then circulated throughout the home via a network of ducts. Bonaire product is now recognised worldwide A ducted evaporative cooling system delivers clean fresh, naturally cooled air resulting in the products being sold to many throughout your home. Doors and windows are left open to exhaust the air. countries around the world. The clean filtered air leaves your home free of any contaminants. Key benefits of ducted evaporative cooling Bonaire® provides you with Peace of Mind The key benefit of ducted evaporative cooling is whole of home cooling that is significantly cheaper to install and significantly cheaper to run than standard ducted refrigerated aircondtioning systems that usually operate as a zoned system. Bonaire Specialists Evaporative cooling is the healthy choice, circulating clean, fresh, naturally cooled In order to ensure that your Bonaire system is correctly designed and installed we have a air throughout your home, compared to recirculated air used in ducted refrigerated network of authorised and accredited specialist Dealers. aircondtioning systems. The clean, filtered air is soft and gentle on the eyes and nose and does not dry out the skin which is often better for hay fever and many asthma suffers.
    [Show full text]
  • The Effect of Heating Systems on Dust, an Indoor Climate Factor
    Agronomy Research Biosystem Engineering Special Issue 1, 165-174, 2011 The effect of heating systems on dust, an indoor climate factor T. Nõu and V. Viljasoo Institute of Technology, Estonian University of Life Sciences, Kreutzwaldi 64, EE51014 Tartu, Estonia; e-mail: [email protected] Abstract. As people stay approximately 90% of the days indoors, so they are affected by indoor environment. Indoor air quality for humans is even more important than outdoor air quality. The most important factors for shaping indoor climate, for example air temperature and air quality factors, such as various chemical and biological factors of air cleanliness – humidity and dust. One of the working environment risks is dust which can be found everywhere in the air. Dust is a general name for solid particles with diameters smaller than 75 micrometres. Dust in homes, offices, and other human environments contains human skin cells, small amounts of plant pollen, human and animal hair, textile fibres, paper fibres, minerals from outdoor soil, and many other materials which may be found in the local environment. Dust may worsen asthma, hay fever, rhinitis, bronchitis, and allergy. The aim of the research was to improve indoor climatology with different heating systems and to analyse, synthesise, and assess indoor climate parameters. The study methods were based on measurement of dust, temperature, relative humidity, and air velocity. Maximum dust concentration (11.39mg m-3) in the air space was observed in conditions guaranteed by ground source heat pump, as the floor is warm and warm air moves upwards, spinning floor dust into the air.
    [Show full text]
  • Rio Diffuser Brochure 2020
    - CREATING A SPECIAL PLACE - Create a wonderfully soothing atmosphere with soft changing colours, calming streams of mist and relaxing aromatherapy oils. The elegant designs are suitable for any room and being almost silent are perfect for use when sleeping. ZOEY HUMIDIFIER & AROMA DIFFUSER ► modern design lifestyle ► USB powered ► use with aromatherapy oils ► neutralises odours ► 2 function buttons - light & mist ► 7 Relaxing colours - rotate or select one ► adds a natural, botanical scent to any room ► auto switch off AROMA DIFFUSER, ► air ioniser HUMIDIFIER AND NIGHT-LIGHT ► 90ml water capacity ► colour changing LED soft ► can be used to naturally ► ideal as a night light night-light creates an enjoyable vapourise aromatherapy oils – tranquil ambience – ideal for no heat is used. Simply add MODEL: DHZO bedrooms oils to water 2 FUNCTION ► 7 relaxing changing colours BUTTONS LIGHT & MIST ► near silent ultrasonic humidifier creates fine mist 4 MODEL: DHNL 5 LOLA ILYA AROMA DIFFUSER, HUMIDIFIER & NIGHTLIGHT HUMIDIFIER & AROMA DIFFUSER ► adds a sense-soothing aroma to any room ► opaque glass globe lifestyle ► 7 relaxing changing colours ► diffused light effect ► continuous mist for 3-4 hours ► easy single touch operation. ► humidifies dry air ► use with essential oils ► ideal as a night light ► 7 changing colour mood lights ► 70ml water capacity ► ideal as a night light ► automatic shut-off function ► tank capacity - 90ml ► measures 12cm x 11cm ► USB powered MODEL: DHLO MODEL: DHIL 6 7 ALYA AROMA DIFFUSER, HUMIDIFIER & NIGHT-LIGHT ► 8 Relaxing
    [Show full text]
  • Sick Building Syndrome', I:He Cause of a Repucedly High Incidence of S I~Km:Ss Among Occupancs of Sealed, Mechanically Ventila[Ed Buildings
    Buildini; S.mJ . Eng. Res. T~chnol. 10(1 ) 1-11 (1989) Primed in Grc:i.c Britain Review paper Summary This paper reviews published information on 'sick building syndrome', i:he cause of a repucedly high incidence of s i~km:ss among occupancs of sealed, mechanically ventila[ed buildings. le discusses sympcoms, common fe:Hures of 'sick buildings' and posrulaces possible causes. On [he basis of reported cases, mere appears to be no single cause buc a series of concriburing fac:ors. Sick building syndrome J M Sykes BSc CEng MCIBSE MIGasE MinstE ,\HOH Hea!ili & Safery Executive, Magdalen House, Scanley Precinct, Boo cle L20 3QZ, .\1. erseyside, UK Received H April 1988, in final form 7 Occober 1988 1 Introduction building syndrome' based on their particular area of interest:",s . Such an approach may have advantages if the Concern about the reportedly high incidence of sickness different symptoms suffered by the occupants of sick build­ among people who work in sealed buildings, especially ings can be shown to have many different causes. offices, has attracted considerable attention. In the UK this is a comparatively recent problem, most reports having been 3 Reported cases published since 1980, but in other countries, especially in North America and Scandinavia, the problem was first Reports of 'sick building syndrome' fall into two caregories­ reported some 30 years ago, in both the workplace and the investigation of cases in order to prescribe a remedy, and home. surveys of office and other buildings to assess the extent of Various terms have been used to describe the phenomenon­ the proble:n and its likely causes.
    [Show full text]
  • ESD Control Selection Guide Choose from Our Extensive Range of Grounding Accessories, Packaging, Clothing and ESD Control Equipment
    ESD Control Selection Guide Choose from our extensive range of grounding accessories, packaging, clothing and ESD control equipment uk.rs-online.com November 2017 Introduction ESD Control Selection Guide INTRODUCTION Many electronic components and assemblies used in high technology products As industry experts, we offer an extensive selection of Electrostatic discharge can be damaged or degraded by the sudden exchange of static electrical charges. control equipment for any workplace environment. Brands range from RS Pro, our This Electrostatic Discharge, or ESD, is the reason industries handling susceptible high quality, professionally approved own range, to SCS, Charleswater, Menda, electronic components must take steps to minimise ESD risk. EMIT, Electrolube, Vermason and other market-leading brands. WHAT IS ESD AND WHAT ARE ITS RISKS? WHY ESD CONTROL? ESD STANDARDS When two items are at different levels of electrostatic As electronic technology EN 61340 Part 5-1: Protection of charge, i.e. one positively and one negatively charged, advances, electronic circuitry electronic devices from electrostatic they will want to come into balance. If the items are in gets progressively smaller. phenomena is the standard most close enough proximity there can be a rapid, spontaneous As the size of components is companies use to build their ESD control transfer of electrostatic charge from one to the other. This reduced so is the microscopic plan. is called Electrostatic Discharge or ESD. spacing of insulators and circuits within them. The standard uses a Human Body Model ESD is the hidden enemy in a high-tech manufacturing Their sensitivity to ESD is to simulate discharges from a person and increasingly environment.
    [Show full text]